Search Results

Search found 12484 results on 500 pages for 'host'.

Page 151/500 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• How to make Windows 7 Network show Samba share after VM is rebooted/restored?

  - by lackey

  On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• Input traffic shaping

  - by whitequark

  I know that I can shape output traffic with tc or a similar tool. However, I want to shape the input traffic now—actually, I want to prioritize downloading of files of certain type through a slow lossy connection. I know the reason tc can only shape output traffic: the host itself has no direct control over the amount of input traffic. On the other hand, TCP has some measures built in it which prevent the TCP traffic from overflowing a slow connection. So, can I mangle something in TCP header so that the remote host will think my connection is slower than it thinks? Suppose that I am able to set the corresponding mark on both types of connections with iptables. Is there any way to reduce the input bandwidth of connections of first type, but only if connections of second type are present?

  Read the article

• Cloning OpenVZ container

  - by Tiffany Walker

  I have an OpenVZ container on 1 host and I would like to clone it over to my server. both run SolusVM. I only have root access to my server and would like to host the container on my server now. Can I use rsync to clone the drive while the OS is running on both? Using a command like this: rsync -uazPx --exclude='/boot' --exclude='/proc' --exclude='/dev' --exclude='/lib' --exclude='/tmp' --exclude='/var/lock' / [email protected]:/ Is there any other areas I should probably not copy over?

  Read the article

• How to display SSH banner at login, but only for password authentication

  - by banjer

  I have a warning message that is displayed to a user after they enter their username to log in to our Linux servers. I only want to display this message for password authentications, and not when keys are used. It should only show to a user who is logging into a host, and not when they are sshing from one host to another (our hosts all have keys set up so we can ssh from one to another without entering passwords). Currently, I have a line for Banner in the /etc/ssh/sshd_config file which points to a text file containing the warning message. Banner doesn't appear to have any further config options, so I'm wondering if there is a way to do this with pam or some other mechanism? Thanks.

  Read the article

• EC2 hostname ubuntu and ejabberd

  - by aelbaz

  I have questions related to the host name in Ubuntu EC2 instances. I have a IPS elastics for hosts that want to be seen from the internet and I have pointed out in the DNS entries with the computer name to those ips. For example, for elastic IP 11.11.11.11 DNS I added my computer name www.example.com. But I also want to rename the machines which they have, because it is a parameter of the service running on them (ejabberd server). EC2 instances are restarted when changing the host name, and seen on the client requesting dhcp hostname to dhcp Amazon. My question is ... What is the safest method to change the hostname: dhcp client modify, insert the command in rc.local, etc. ..? Could I have a problem with the internal resolution of traffic between EC2 instances? thanks

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• switch duplicates packets and forward in two route

  - by sami

  there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

  Read the article

• Use teamviewer for running web server [closed]

  - by Steve

  I have a PC behind NAT. I want to host a web server on it which is accessible from the internet. I cannot open any blocked ports nor do i have admin rights on the computer. But it has a teamviewer client running on it 24*7 to which i do have access(no vpn installed). I can accesss this client from anywhere using teamviewer. I want to know if somehow i can use teamviewer to get a ip/hostname that is accessible from the internet and host a webserver. Also is it possible to get an ip if i get admin access but without opening ports.

  Read the article

• 3 Root accounts in MySQl database

  - by hairbymaurice

  Hello, I have managed to get mySQL running under Ubuntu 8.10, I am now diligently trying to secure the database and am adding passwords for the root users. My question: I have a root user under the host "kickseed" with no password set I have no idea what kickseed is as the database is installed under localhost, on searching around i have discovered that this is something to do with the ubuntu OS itself. Is it safe to delete this user account from MySQL or is it used for something by the OS? If i need to keep it should i /can i protect it with a password? Also i have another root account under the host IP 127.0.0.1 again can i delete this? My absolute preference would be to have only one account with root access but i do not want to delete these accounts if they are necessary. Thanks for tolerating a newbie Regards Hairby

  Read the article

• options for deploying application

  - by terence

  I've created a simple web application, a self-contained tool with a user system. I host it publicly for everyone to use, but I've gotten some requests to allow companies to host the entire application privately on their internal systems. I have no idea what I'm doing - I have no experience with deployment or server stuff. I'm just some person who learned enough JS and PHP to make a tool for my own needs. The application runs with Apache, MySQL, and PHP. What's the best way to package my application to let others run it privately? I'm assuming there's better options than just sending them all the source code. I'd like to find a solution that is: Does not require support to set up (I'm just a single developer without much free time) Easy to configure Easy to update Does there exist some one-size-fits all thing that I can give to someone, they can install it, and bam, now when they go to http://myapplication/ on their intranet, it works? Thanks for your help.

  Read the article

• why is drop box syncing so freakishly slowly in my linux virtual machine?

  - by Bec

  i am setting up a linux virtual machine (windows 7 64 bit host, ubuntu 64 bit guest, using virtual box) and i just installed drop box and set it to sync. I've only got about 2Gb in there so i figured it should take just an afternoon, but it's going at about 0.5 kB/second and says it will take about 60 days. I usually get about 200 kB/second in the host OS, and downloading straight from the dropbox website through firefox in the ubuntu VM i get about that, but sync is really slow. any tips?

  Read the article

• check_ssh executed from Nagios server returns "Server answer: ", nothing else

  - by phs

  Commmand works on the host I need to monitor (its IP is denoted as $HOSTADDRESS$ here): [root@host ~]# /usr/local/nagios/libexec/check_ssh localhost SSH OK - OpenSSH_4.3 (protocol 2.0) However, on the Nagios server, it does not: root@server:~# /usr/lib/nagios/plugins/check_ssh -H $HOSTADDRESS$ Server answer: I can see that the port is open: root@server:~# /usr/lib/nagios/plugins/check_tcp -H $HOSTADDRESS$ -p 22 TCP OK - 0.123 second response time on port 22|time=0.123277s;;;0.000000;10.000000 And I can verify with telnet: root@server:/etc/nagios3/conf.d# telnet $HOSTADDRESS$ 22 Trying $HOSTADDRESS$... Connected to $HOSTADDRESS$. Escape character is '^]'. After searching the web for two hours and trying different suggestions I am out of ideas. I have several other hosts with similar setup, and they don't have this problem. I have compared the configs and they look the same (I think). I am clearly missing something here.

  Read the article

• NTP configuration not recognized?

  - by Eugene S

  I'm trying to configure NTP on my machine but it seems that the parameters I set are not being read by the system. Below is my /etc/ntp.conf file. (I applied the most basic configuration to eliminate other issues) server 10.45.68.47 server 127.0.0.1 After I set the above configuration, I restart the ntpd process by doing the following: service ntpd restart And then I get the following output: Shutting down ntpd: [ OK ] ntpd: Synchronizing with time server: [FAILED] Starting ntpd: [ OK ] Moreover, I can see the following in /var/etc/messages: Apr 2 10:54:07 hsystem1a ntpd[21067]: ntpd exiting on signal 15 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer1 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer2 Apr 2 10:54:07 hsystem1a ntpdate[21537]: no servers can be used, exiting So it seems that the ntpServer1 and the ntpServer2 are being read from somewhere instead of the IPs I configured in /etc/ntp.conf. NOTE: I done init 6 on the machine just in case. Thanks!

  Read the article

• How to set up multiple websites / virtual hosts on MAMP?

  - by philfreo

  How do you configure MAMP to manage/host multiple websites at one time?

  Read the article

• Can I copy from vim to another window without +xterm-clipboard?

  - by GorillaSandwich

  I'm using Ubuntu and vim. I can copy text from vim and paste it into another window by highlighting it in vim, then middle-clicking in the other window. This works fine when I'm on my local machine. I can also copy into the system register by highlighting text and yanking to the system register. (For example, Shift-V JJ "+ y to go into linewise visual mode, highlight two lines, select the '+' register and yank.) It's then available to paste into other windows. However, if I ssh into my web host, I can't do either of these. (They use some flavor of Linux - I think it's CentOS.) In vim, if I type :version, my local version shows +xterm_clipboard, but the host's version shows -xterm_clipboard. I don't have sudo rights there. Is there any way to be able to copy from their vim without getting them to tinker with the installation?

  Read the article

• Install additional PHP version in different folder on Ubuntu 8.04

  - by chessweb

  Hi, I'm on a Host Europe VPS running Ubuntu 8.04 server. PHP version is 5.2.4. Now there is an application (Moodle 2.0) that needs at least PHP 5.2.8. I don't want to upgrade serverwide to PHP 5.2.8 because that might impair other applications (e.g. Plesk). The FAQ at Host Europe suggest to install an additional PHP 5.2.8 in /opt/php and I think I can handle that with $ dpkg -i php_..._.deb --root /opt/php (Is that correct, by the way?) However, how do I point Apache to the new PHP installation? Thanks for any advice, Ralf

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• Multiple SSL vhosts using wildcard certificate in nginx

  - by vvanscherpenseel

  I have two hostnames sharing the same domain name which I want to serve over HTTPs. I've got a wildcard-SSL certificate and created two vhost configs: Host A listen 127.0.0.1:443 ssl; server_name a.example.com; root /data/httpd/a.example.com; ssl_certificate /etc/ssl/wildcard.cer; ssl_certificate_key /etc/ssl/wildcard.key; Host B listen 127.0.0.1:443 ssl; server_name b.example.com; root /data/httpd/b.example.com; ssl_certificate /etc/ssl/wildcard.cer; ssl_certificate_key /etc/ssl/wildcard.key; However, I get the same vhost served for either hostname.

  Read the article

• Problem connecting to MySQL with zend

  - by wheresrhys

  I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

  Read the article

• Which server requirment for a Redmine, Git and website hosting?

  - by Ephismen

  Me and 9 other students are going to start a project that will last a minimum of 2 years, for this purpose we are looking to host all our work on a server. Here are a few tools we would like to work with: Redmine GIT Hosting a website/blog to show our work Hosting an internal and private development website/blog We haven't decided yet which OS we will install, but we were looking toward Ubuntu or Fedora. Having a limited budget, 300$/year, we would like to have some advices on the following dedicated server specifications: Kimsufi 2G: Hardware: Intel Celeron/Atom, 1.20 Ghz, 64 bits, 2Gb DDR2, HDD 1 To, Backup FTP 100Gb Network: Connection 100 Mbps, Illimited trafic Dedibox SC: Hardware: Dell Nano U2250, 1x 1,6GHz, 64 bits, 2Gb DDR2, HDD 160 Gb Network: Connection 1Gbit/sec, Illimited trafic Will these server be sufficient? Should we host the websites on another platform? Would a virtualized server be more appropriate? Thank you for your answers, Ephismen.

  Read the article

• SSH from Windows Vista to Ubuntu (using cwrsync)

  - by user39141

  Newbie questoin but I can't seem to figure it out. Using cwrsync which in turn calls ssh.exe from a Windows Vista box to Ubuntu. For below, user in ubuntu is 'linuxuser' and user on Windows box is 'winuser' - remote box is 'linuxhost' and windows box is 'winhost' Exported keys such that on the remote box /home/linuxuser/.ssh/authorized_keys is correctly populated. Problem is when I launch ssh it tries to write to /home/winuser/.ssh instead of /cygdrive/home/users/winuser/.ssh as below. c:\Program Files (x86)\cwRsync\binssh linuxuser@linuxhost Could not create directory '/home/winuser/.ssh'. The authenticity of host 'linuxhost (192.168.1.105)' can't be establish ed. RSA key fingerprint is 67:10:a9:49:6e:a3:2b:4a:a0:e0:b7:75:76:da:c3:04. Are you sure you want to continue connecting (yes/no)? Host key verification failed.

  Read the article

• How do I configure namecheap for "arbitrarily-nested" wildcard subdomains?

  - by rabidsnail

  I'm trying to set up something like nyud.net, where any arbitrary chain of subdomains resolves to the same CNAME record (which in my case points to an amazon elastic load balancer). Ex: www.gogle.com.nyud.net:8080 points to one of their cache servers, which looks at the HOST header and returns www.google.com. I'm using namecheap as my dns host. Adding a CNAME record for *.mydomain.com doesn't seem to do anything (nslookup gives NXDOMAIN for all subdomains). What do I have to do to set this up? Do I have to use something fancier than namecheap (like route53)?

  Read the article

• nginx proxy pass redirects ignore port

  - by Paul

  So I'm setting up a virtual path when pointing at a node.js app in my nginx conf. the relevant section looks like so: location /app { rewrite /app/(.*) /$1 break; proxy_pass http://localhost:3000; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } Works great, except that when my node.js app (an express app) calls a redirect. As an example, the dev box is running nginx on port 8080, and so the url's to the root of the node app looks like: http://localhost:8080/app When I call a redirect to '/app' from node, the actual redirect goes to: http://localhost/app

  Read the article

• Using Hamachi VPN to connect to Linux VM at home

  - by Cameron Verotti

  I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >