Search Results

Search found 4435 results on 178 pages for 'matt dell'.

Page 151/178 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• Redundant APC UPS units, single server set up

  - by Sholom

  Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

  Read the article

• Windows 7 starter will not shutdown or logoff

  - by richzilla

  Im having some problems with a friends netbook (a dell mini 10). It will not shutdown or logoff via the usual route. Whenever the shutdown/logoff button is clicked, it will briefly freeze (maybe for only a second) and then do nothing. Ive tried shutting down manually via the command line using shutdown /p but all to no avail, it just defaults back to flashing cursor in the command prompt. There doesnt seem to be any mention of a similar problem on google so i was wondering if anyone else had any ideas. Thanks oh and its runnning windows 7 starter.

  Read the article

• Windows 8 stuck installing update

  - by Marcom

  I just restarted my laptop to finish installing a Windows update and now it is stuck on please wait. I have tried a system restore but there is only one restore point in the list and it does not work for some reason... I also tried to do a refresh but it asks me for media. I plug in the usb I used to install windows 8 a while and go and says that the media failed to load. I'm kind of stuck on options now. I can't boot and I can't restore and it seems I cant format either! Is there anything anything else I can do to get things going?! I'm running Windows 8 on a dell xps 14 ultrabook. Win 8 is installed on an msata drive and booting using EFi.

  Read the article

• Several devices in Device Manager have Code 3 error

  - by John Straka

  One of our users' machines (Dell Optiplex 380 running Windows 7 32-bit) is having a weird driver issue. A bunch of devices have Error Code 3: The driver for this device might be corrupted, or your system may be running low on memory or other resources. (Code 3) The system isn't low on memory (only 1GB in use out of whatever the max for 32-bit is.) Here's a screenshot of the affected devices: I tried reinstalling the chipset and audio drivers to no avail. I have no idea what prompted it, and I'm not sure how the basic Windows Generic PnP Monitor driver could even be corrupted. What might be causing this error?

  Read the article

• Which server requirment for a Redmine, Git and website hosting?

  - by Ephismen

  Me and 9 other students are going to start a project that will last a minimum of 2 years, for this purpose we are looking to host all our work on a server. Here are a few tools we would like to work with: Redmine GIT Hosting a website/blog to show our work Hosting an internal and private development website/blog We haven't decided yet which OS we will install, but we were looking toward Ubuntu or Fedora. Having a limited budget, 300$/year, we would like to have some advices on the following dedicated server specifications: Kimsufi 2G: Hardware: Intel Celeron/Atom, 1.20 Ghz, 64 bits, 2Gb DDR2, HDD 1 To, Backup FTP 100Gb Network: Connection 100 Mbps, Illimited trafic Dedibox SC: Hardware: Dell Nano U2250, 1x 1,6GHz, 64 bits, 2Gb DDR2, HDD 160 Gb Network: Connection 1Gbit/sec, Illimited trafic Will these server be sufficient? Should we host the websites on another platform? Would a virtualized server be more appropriate? Thank you for your answers, Ephismen.

  Read the article

• Error 1603 when installing Microsoft Intellipoint 8.2 on Windows 7 x64

  - by HeB

  Installing MS Intellipoint 8.2 (for my MS touch mouse) on my Dell Inspiron 580 always gives the following error: "Setup must close because an error occurred. Verify that your computer meets the system requirements on the product packaging. Restart your computer and try running Setup again. If this error happens again, see Help for customer support options. (Error Code 1603)" I'm running Windows 7 x64 with all latest updates. MS solutions don't work. How to fix?

  Read the article

• Can I connect my ipod's earphones to my computer?

  - by user1361315

  My computer (recent model Dell z600) has 2 input devices on the front of the computer, 1 has an icon of headphones and the other is a Mic icon. When I plugin my earphones to the input device that has the headphones, and play some sound I don't hear anything from my earphones (sounds comes from built in speakers). I know when I plugin a USB headphone set, it switches over to those on but for some reason my earphones are not being picked up. Is it not compatible? Note: my earphones look similar to http://www.hdaccessory.com/catalog/reprearphone.jpg

  Read the article

• How can you convert audio (3.5mm) to S/PDIF?

  - by SSumner

  I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

  Read the article

• My laptop suppose to have 6 GB ram but it's only 2 GB installed

  - by monablo

  My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by user7651

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• Missing Jumbo and MTU for Broadcom NIC?

  - by Mike

  I have two Broadcom BCM5708C NetXtreme II GigE NICs in my Dell Windows SBS 2008 server. I would like make one them them Jumbo Frames enabled so that I can add it to my SAN whose VLAN on the switch is already using 9000 MTU. Broadcom's own data sheet for this NIC claims that it is Jumbo Frame capable up to a 9000 MTU. The problem is that there is no setting for Jumbo or MTU in the NIC's configurable settings. There are other settings but just not the one I need to change. Am I missing something here? The driver claims to be up-to-date when I allow Windows to search on-line.

  Read the article

• Why can't I create a Windows backup on my secondary disk?

  - by Brian Sullivan

  I've installed Windows 7 Ultimate on an SSD that I've added to the XPS desktop that I bought from Dell. I would like to use the built-in backup functionality to create incremental backups and store them on the large drive that came with the machine. I formatted the large drive and turned it into a Basic disk. However, when I try to set the backup location to the large internal disk (E:\) in the "Set up backup" wizard, a get a message saying, "A system image cannot be saved on a drive that your computer boots from or that Windows is installed on." Windows is not installed on that disk. I even deleted the OEM partition that was on the disk, and removed it completely from the boot order in the BIOS. Any clue why Windows is griping at me about this?

  Read the article

• How to diagnose a Windows XP hard crash

  - by Jon

  I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

  Read the article

• iptables blank after reboot

  - by theillien

  We've started encountering an issue with iptables on our RHEL 6.3 systems in that after a reboot, when the service starts, the rules are not loaded. We get the empty ruleset: [msnyder@matt-test ~]$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is in spite of the fact that we have rules defined and the service is, indeed, running. That I know because when I run service iptables start it simply drops back to the prompt. If I run service iptables restart it actually stops and then restarts the service. And, of course, if I run service iptables stop it indicates that iptables is actually stopping. Knowing that I need to restart the service, I do so and the rules load up properly. They simply don't get loaded after a reboot. Unless they get loaded differently during a reboot I don't see how our rules would be wrong. If they were, they wouldn't even load during a service restart. Has anyone else ever encountered this? EDIT: The rules are already saved in /etc/sysconfig/iptables. They are not added on the fly from the command line so service iptables save is unnecessary.

  Read the article

• PS/2 mouse works with Windows 7 32-bit but not recognised by 64-bit, What to do?

  - by Bogan

  Our USB mouse was stolen and a PS/2 OK_520 Mouse that works OK on my Medion PC, running Windows 7 32-bit, if plugged in before booting, is not recognised by Windows 7 64-bit on a Dell INSPIRONone_19T with a 19" Touch Screen. (It is a communal computer available to all residents.) A USB mouse works OK and the Update Driver option reports: 'driver is up to date'. Without the USB Mouse, Device Manager/Mice shows only the Touch Screen as a Mouse. The Add New Hardware option searches but shows nothing and the Troubleshooter says ' device possibly not recognised, alterations made to system, try again.' but it is still not recognised after repeated re-boots. The BIOS does not seem to have any option to enable a PS/2 Mouse. The Mouse is very old so maybe it is not 64-bit compatible, or there is no 64-bit driver for one, but how to get one if the device is not recognised?

  Read the article

• No sigal showing on LCD TV when Conects Leptop via VGA Cable [migrated]

  - by Amit Prajapati

  I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

  Read the article

• Why does the Mac OS X (10.6) Finder stop being able to connect to Windows computers?

  - by Drarok

  We have one Mac (a MacBook Pro Unibody) amongst our Windows machines which connects to the "server" (actually a Dell running Windows XP Pro) to access documents. This works just fine most of the time, but sometimes after waking from sleep, it cannot connect to any Windows computer on the network. There are no errors (nor even any messages) in the Console application when attempting to connect either by the Finder's network browsing, nor when using the "Connect To Server" menu. I have tried "Relaunch" on Finder, toggled File Sharing, disabled and re-enabled the Airport, but nothing makes the Mac able to connect again until I reboot it! Other computers can connect to the machines, so it is definitely the Mac at fault. Are there any workarounds that anyone has found? Is there perhaps a way to re-start the samba client?

  Read the article

• Wireless dropouts that only affect subset of devices

  - by jwaddell

  When watching videos streamed over WiFi from a NAS box (D-Link DNS-323) I am getting wireless dropouts. However they only appear to occur when I have left my laptop (Dell Inspiron 9300 running Windows XP SP3) running; the laptop is usually suspended if I'm not using it. The dropouts have occurred when streaming to a Netgear EVA8000 streaming device, and also to a PS3. I'm using a Netgear DG834G as the wireless modem/router. When a dropout occurs I go to the laptop and see that its wireless connection has also dropped out. The odd thing is that my wife's MacBook and my iPhone still maintain their connections. What could be causing this behaviour, and how do I go about fixing it?

  Read the article

• Database or website of kernel config files ?

  - by Kami

  I've experienced some kernel panic after trying to compile gentoo kernel for a Sun UltraSPARC T5120 Server. The kernel panic came from a missing support for the SAS disk controller in the menu config. I've wasted so much time because I had no clue about the hardware I was using. I know that the kernel config depends on what you plan to do with your machine but I want to have a configuration file that at least match my hardware ! Is there a website or database that provides menuconfig's kernel configuration files for known or branded hardware like Dell Server or Apple computers ?

  Read the article

• memtest86+ crashing on server

  - by user148723

  we have a few DELL 1950 servers. 1 of this servers has CentOS6.3 and its randomly rebooting so I suspected it was hardware. (no log generated) the other 4 servers do not randomly reboot. We passed memtest86+ on the 5 servers, and on 3 of them memtest86+ crashes (displaying an odd and colorful screen, like if a video card failed) Although I tested old memtest86 (not +), and all servers did not crash. I also tested other RAM testers utilities, no tool failing. have any of you guys experience this? thanks

  Read the article

• Automatic driver search & update on Windows?

  - by Ben

  I have a Dell laptop issued by my employer, and I always find it a real pain to search for, download and maintain their drivers. It baffles me that there does not seem to be a nice way (product, website, ...) to just download the stuff you need, without hassle. The same goes for the other Windows based laptops in my direct environment. Are there any (preferably free) automated solutions available? Or do you have a nice workflow - other than searching the manufacturers website - to help smoothing this process?

  Read the article

• Moving Exchange .EDB and .STM file to other partition

  - by Jorge Fernandez

  Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

  Read the article

• Installing Windows XP with pre installed Windows 7

  - by user243680

  Hello! I want to install Windows XP on my dell laptop which has pre installed Windows7 on it. I want windows Xp on my system because of my project issue. Now the problem is Windows7 does not allow to install Windows Xp on my system. I dont mind if windows 7 gets replaced by Windows XP,all i want is windows XP on my system.I am not getting the way to install XP. Can anyone guide me how to install Windows XP on my laptop? i need an urgent help.

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >