Search Results

Search found 18243 results on 730 pages for 'tcp connection'.

Page 151/730 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

  • Is an Ethernet point to point connection without a switch real time capable?

    - by funksoulbrother
    In automation and control, it is commonly stated that ethernet can't be used as a bus because it is not real time capable due to packet collisions. If important control packets collide, they often can't keep the hard real time conditions needed for control. But what if I have a single point to point connection with Ethernet, no switch in between? To be more precise, I have an FPGA board with a giga-Ethernet port that is connected directly to my control PC. I think the benefits of giga Ethernet over CAN or USB for a p2p connection are huge, especially for high sampling rates and lots of data generation on the FPGA board. Am I correct that with a point to point connection there can't be any packet collisions and therefore a real time environment is given even with ethernet? Thanks in advance! ~fsb

    Read the article

  • How can I make WinXP bind to ports other than 1025-5000 for outgoing TCP connections?

    - by Chris Dolan
    (I originally posted a similar question on StackOverflow but readers recommended I post here instead) When you create outgoing TCP connections, most applications let the operating system choose which port to use. Most OSes use the IANA recommended dynamic port range of 49152-65535 for this purpose. But in Windows 2003 and earlier (including XP) Microsoft uses ports 1025-5000. Microsoft lets you change the high end of this range via the MaxUserPort TcpIP registry setting, but I see no way to change the low end. I need to have port 4160 free for incoming connections and on rare occasions an outgoing connection steals that port from me before I bind that port.

    Read the article

  • Can I set up a COM Port that Connects via TCP/IP?

    - by Kristopher Johnson
    I have an RS232 device connected to a Digi PortServer on my network. I can telnet to the Digi's IP and port number to communicate with that RS232 device. I have a Windows application that knows how to talk to the device, but it wants to connect directly to an RS232 port. So, my question: Is there some way to set up a COM port so that when this application connects to it, it goes through the network to the Digi to communicate with the device? I have run across the utility TCP-Com, which seems like it might be a solution. Is this the best option?

    Read the article

  • Closing telnet connection gracefully from session mode itself without going to telnet prompt.

    - by Kumar Alok
    a normal telnet connection is like this: telnet localhost 22 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_4.2 ^] telnet close Connection closed. I want to close it from telnet session itself without coming to telnet prompt by pressing. My requirement is that if i press some control character from telnet session itself like CTRL+A so it will come out of session and close it automatically. something like this: $ telnet localhost 22 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_4.2 ^A Connection closed. $ I tried all the options given at the man page and tried to do some $HOME/.telnetrc file tests but couldn't achieve it, as telnetrc will execute all the commands written in it with the given host whenever a telnet to that host is done. Can anyone help me in this, like how it can be achieved.

    Read the article

  • Can I make Apache drop a connection when matching a URL?

    - by PP
    Using mod_rewrite I can construct a rule to respond with a clean error code (e.g. 404 not found, 410 gone, or 403 unauthorised) when a page is requested that I don't want to serve. But frequently I get completely erroneous requests from hackers scanning my website for vulnerabilities or possibly cross-site scripting attempts. For these customers I do not want to return a clean error - I'd rather do something else like immediately drop the connection with no response or, alternatively, hold the connection open for a lengthy period of time to frustrate the automated process. Any ideas how to accomplish this with Apache? I've read that nginx has the ability to immediately terminate a connection when a particular pattern is matched.

    Read the article

  • If ssh connection fails using SOCKS then what? Automate switch to no proxy?

    - by Benjamin Jones
    Right now I am using plink in a batch routine that reconnects to my SSH server if I loose connection. I use my plink connection & socks proxy (firefox) to forward all my browser traffic. Works great EXCEPT for one thing! If I can't get to my ssh server for some ODD reason I have to go to options in firefox and revert back my settings to NO Proxy. It can be done, but its annoying! So how would I keep my SOCKS Proxy connection in firefox, but if I cant connect to my SSH Server, how can I automatically switch to the autodetect proxy/no proxy settings in firefox? I would think that I could use the Firefox command line arguments and a batch routine to do so, but I do not believe this is possible. I do see via this link where the proxy settings are stored, but does that mean I have to change the proxy settings depending on my senario above within the .js file? http://stackoverflow.com/questions/843340/firefox-proxy-settings-via-command-line

    Read the article

  • Coffeeshop limits Internet connection to 30 minutes -- how does it recognize me if I delete my cooki

    - by Andrew
    I was connected to the Internet in a coffeeshop earlier today, but I was only allowed 30 minutes of access. I tried deleting my cookies after my time was up (though admittedly I didn't delete my Flash cookies -- would that have solved the problem?), but the connection still recognized that I'd already used 30 minutes, so I couldn't connect again. How did the connection recognize me still? The wireless was unprotected (no code or password), it just had a portal you had to pass through upon the initial connection. I'm not terribly familiar with web development or computer networks, so just trying to get a better idea of what's happening (and possibly to know what to do next time I use up my minutes =)).

    Read the article

  • Connection to website interrupted/reset. Why?

    - by Goje87
    When navigating to some websites (like victorsosea.com, citibank.co.in etc.) on Google Chrome, I get a message that the 'connection to www.site.com was interrupted'. If I try on Firefox, it says 'The connection to the server was reset'. This happens no matter what internet connection I use on my laptop. Be it my home internet or office internet. I have tried using Google DNS address as well but that does not seem to solve the problem. I have been facing this problem randomly for some websites. Kindly let me know how I can resolve the issue. My laptop configuration: Windows 7, 64-bit

    Read the article

  • Is an Ethernet point to point connection without a switch real time capable?

    - by funksoulbrother
    In automation and control, it is commonly stated that ethernet can't be used as a bus because it is not real time capable due to packet collisions. If important control packets collide, they often can't keep the hard real time conditions needed for control. But what if I have a single point to point connection with Ethernet, no switch in between? To be more precise, I have an FPGA board with a giga-Ethernet port that is connected directly to my control PC. I think the benefits of giga Ethernet over CAN or USB for a p2p connection are huge, especially for high sampling rates and lots of data generation on the FPGA board. Am I correct that with a point to point connection there can't be any packet collisions and therefore a real time environment is given even with ethernet? Thanks in advance! ~fsb

    Read the article

  • How does the TuneIn mobile application resume a live stream, when the connection breaks?

    - by navnav
    So I have this TuneIn application on my phone, which allows me to listen to many radio stations. It also allows me to rewind and pause the live stream, which I know is doable with today's technology. What gets me puzzled, though, is how when the internet connection breaks, the live stream will stop, but, when the connection comes back, the app can just pick up from where it broke. Why it gets me puzzled is because there is no way for the app to cache the live stream when the net connection has gone, yet it can start the live stream back up, from where it broke. Is there is possible to start a live stream, at a specific point of the audio stream? Or are they using some other method?

    Read the article

  • How do you launch an SSH connection with port forwarding without interrupting your screen access?

    - by vfclists
    I want to make an SSH connection to another server with forwarding, but without having to log on to the remote server, nor interfere with the screen I am working on. I also need to access the connection to terminate it when I finish with it. eg. say I want to do a mysql backup on a remote server so I use the command ssh user@remote -L 1234:localhost:3306 but after issuing the password I want to run the mysql command in the session, but be able to access the SSH connection when I finish with mysql and terminate it. Is there some way this can be done?

    Read the article

  • Is it possible to kill a RAS connection which won't disconnect.

    - by sgmoore
    I have a Windows 2003 Server which has a number or RAS Connections to some of our customers. Occasionally the connections go into a mode where there are connected, but not working. Disconnecting and reconnecting solves the problem. However sometimes you can not disconnect as I get the following error message It is not possible to disconnect at this time. The connection is currently busy with a connect or disconnect operation. There are no visible connection dialog boxes when this message occurs and I usually end up having to restart the server which obviously affects all the other users. I know that if you have a service that is stuck 'stopping' you can just kill it. Is there anything similar that you can do to reset a ras connection?

    Read the article

  • Intel Network Connection: This device cannot start. (Code 10)

    - by harryuser
    I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

    Read the article

  • How to delete a faulty FTP connection in Aptana?

    - by Peter
    Hi, I just created an FTP connection in Aptana in which I made a mistake. I told Aptana to remember it anyway while I looked up the correct data (user/password and such). Now I want to edit the FTP connection but as soon as I click it tries to connect which results in an error. If I try to delete it, same story, it tries to connect and I get the error and the delete doesn't go through. So, I have a non working FTP connection that I can't delete nor edit.How do I get rid of this thing? Or how do I correct it? Cheers.

    Read the article

  • How to retrieve connection details of CheckPoint SSL Network Extender?

    - by amoe
    My workplace uses a Java-based VPN tool named CheckPoint SSL Network Extender. I would like to configure the VPN connection myself using stock OS tools, because I find the applet to be rather unstable. How would I go about getting all of the connection details needed to manually connect to the VPN? My workplace only supports the official client. When I am connected with the Java applet, if I run ipconfig /all I can see that a hidden network connection is created named Check Point Virtual Network Adapter For SSL Network Extender - Packet Scheduler Miniport. I can see the various IP and DNS details there as well. However, because I need to log in to the applet-based tool, I presume I need to export some kind of key in order to use OS tools to configure this. Is this even possible? Answers for any OS are great although I am using Windows XP to test, and also want to use Linux clients.

    Read the article

  • Can't delete an iptables chain

    - by Raul Adrian Altavano
    I'm having a problem on deleting a user-defined chain. these the are rules I entered. sudo iptables -t mangle -N internet sudo iptables -t mangle -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j internet sudo iptables -t mangle -A internet -j MARK --set-mark 99 sudo iptables -t nat -A PREROUTING -i eth1 -p tcp -m mark --mark 99 -m tcp --dport 80 -j DNAT --to-destination 192.168.3.1 When i'm using -X or -D, it gives me this error iptables: No chain/target/match by that name.

    Read the article

  • Installing Yaws server on Ubuntu 12.04 (Using a cloud service)

    - by Lee Torres
    I'm trying to get a Yaws web server working on a cloud service (Amazon AWS). I've compilled and installed a local copy on the server. My problem is that I can't get Yaws to run while running on either port 8000 or port 80. I have the following configuration in yaws.conf: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true This produces the following successful launch/result: Eshell V5.8.5 (abort with ^G) =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Using config file /home/ubuntu/yaws.conf =INFO REPORT==== 16-Sep-2012::17:21:06 === Ctlfile : /home/ubuntu/.yaws/yaws/default/CTL =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:8000 for <3> virtual servers: - http://domU-12-31-39-0B-1A-F6:8000 under /home/ubuntu/yaws/www/trial - =INFO REPORT==== 16-Sep-2012::17:21:06 === Yaws: Listening to 0.0.0.0:4443 for <1> virtual servers: - When I try to access the the url (http://ec2-72-44-47-235.compute-1.amazonaws.com), it never connects. I've tried using paping to check if port 80 or 8000 is open(http://code.google.com/p/paping/) and I get a "Host can not be resolved" error, so obviously something isn't working. I've also tried setting the yaws.conf so its at Port 80, appearing like this: port = 8000 listen = 0.0.0.0 docroot = /home/ubuntu/yaws/www/test dir_listings = true and I get the following error: =ERROR REPORT==== 16-Sep-2012::17:24:47 === Yaws: Failed to listen 0.0.0.0:80 : {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Can't listen to socket: {error,eacces} =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =ERROR REPORT==== 16-Sep-2012::17:24:47 === Top proc died, terminate gserv =INFO REPORT==== 16-Sep-2012::17:24:47 === application: yaws exited: {shutdown,{yaws_app,start,[normal,[]]}} type: permanent {"Kernel pid terminated",application_controller," {application_start_failure,yaws,>>>>>>{shutdown,>{yaws_app,start,[normal,[]]}}}"} I've also opened up the port 80 using iptables. Running sudo iptables -L gives this output: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- ip-192-168-2-0.ec2.internal ip-192-168-2-16.ec2.internal tcp dpt:http ACCEPT tcp -- 0.0.0.0 anywhere tcp dpt:http ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination In addition, I've gone to the security group panel in the Amazon AWS configuration area, and add ports 80, 8000, and 8080 to ip source 0.0.0.0 Please note: if you try to access the URL of the virtual server now, it likely won't connect because I'm not running currently running the yaws daemon. I've tested it when I've run yaws either through yaws or yaws -i Thanks for the patience

    Read the article

  • JNDI Datasource Problem on Tomcat 6, Hibernate

    - by Asuman AKYILDIZ
    I am using Tomcat 6 as application server, Struts-Hibernate and MyEclipse 6.0. My application uses JDBC driver but I should modify it to use JNDI Datasource. I followed steps as described in tomcat 6.0 howto tutorial. I defined my resource in tomcatconf: <Resource name="jdbc/ats" global="jdbc/ats" auth="Container" type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@//localhost:1521/MISDEV" username="TEST" password="TEST" maxActive="20" maxIdle="10" maxWait="-1" validationQuery="SELECT 1 from dual" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="false"/> I gave reference in my application web.xml: <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ats</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I defined datasource-dialect in my hibernate-cfg.xml <property name="connection.datasource">java:comp/env/jdbc/ats</property> <property name="dialect">org.hibernate.dialect.Oracle9Dialect</property> But when I create hibernate session, it can not open the connection: 09:18:11,322 ERROR JDBCExceptionReporter:72 - Connections could not be acquired from the underlying database! org.hibernate.exception.GenericJDBCException: Cannot open connection I also tried to set the properties at runtime: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); It does not open connection again. But, when I use JDBC driver it works: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.connection.url", "jdbc:oracle:thin:@//localhost:1521/MISDEV"); configuration.setProperty("hibernate.connection.username", "test"); configuration.setProperty("hibernate.connection.password", "test"); configuration.setProperty("hibernate.connection.driver_class", "oracle.jdbc.OracleDriver"); configuration.setProperty("hibernate.transaction.factory_class", "org.hibernate.transaction.JDBCTransactionFactory"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); I have been searching for 3 days and no success. What may be de problem?

    Read the article

  • Why my Buffalo router keeps on sending rdp, netbios, ftp, http requests?

    - by user192702
    I have the following network setup: Buffalo Router (192.168.100.1) < Watchguard XTM21 (192.168.100.13) < PC For some reason I keep on seeing the following repeating on my XTM21's Traffic Monitor. While I have enabled Port Forwarding, none of the ports reported below were enabled. Can someone let me know why I'm seeing all of these? 2013-10-19 23:37:56 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4013 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 282700472 win 5840" Traffic 2013-10-19 23:37:59 Deny 192.168.100.1 192.168.100.13 http/tcp 2459 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 296571237 win 5840" Traffic 2013-10-19 23:38:02 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 290482691 win 5840" Traffic 2013-10-19 23:38:08 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic 2013-10-19 23:38:32 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4025 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 321868558 win 5840" Traffic 2013-10-19 23:38:35 Deny 192.168.100.1 192.168.100.13 http/tcp 2471 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 325918731 win 5840" Traffic 2013-10-19 23:38:38 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 327101423 win 5840" Traffic 2013-10-19 23:38:44 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic

    Read the article

  • JNDI Datasource Problem on Tomcat 6, Hibernate

    - by Asuman AKYILDIZ
    Hello; I am using Tomcat 6 as application server, Struts-Hibernate and MyEclipse 6.0. My application uses JDBC driver but I should modify it to use JNDI Datasource. I followed steps as described in tomcat 6.0 howto tutorial. I defined my resource in tomcatconf: <Resource name="jdbc/ats" global="jdbc/ats" auth="Container" type="javax.sql.DataSource" driverClassName="oracle.jdbc.OracleDriver" url="jdbc:oracle:thin:@//localhost:1521/MISDEV" username="TEST" password="TEST" maxActive="20" maxIdle="10" maxWait="-1" validationQuery="SELECT 1 from dual" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="false"/> I gave reference in my application web.xml: <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ats</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I defined datasource-dialect in my hibernate-cfg.xml <property name="connection.datasource">java:comp/env/jdbc/ats</property> <property name="dialect">org.hibernate.dialect.Oracle9Dialect</property> But when I create hibernate session, it can not open the connection: 09:18:11,322 ERROR JDBCExceptionReporter:72 - Connections could not be acquired from the underlying database! org.hibernate.exception.GenericJDBCException: Cannot open connection I also tried to set the properties at runtime: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); It does not open connection again. But, when I use JDBC driver it works: Configuration configuration = new Configuration(); configuration.setProperty("hibernate.dialect", "org.hibernate.dialect.Oracle9Dialect"); //configuration.setProperty("hibernate.connection.datasource", "java:comp/env/jdbc/ats"); configuration.setProperty("hibernate.connection.url", "jdbc:oracle:thin:@//localhost:1521/MISDEV"); configuration.setProperty("hibernate.connection.username", "test"); configuration.setProperty("hibernate.connection.password", "test"); configuration.setProperty("hibernate.connection.driver_class", "oracle.jdbc.OracleDriver"); configuration.setProperty("hibernate.transaction.factory_class", "org.hibernate.transaction.JDBCTransactionFactory"); configuration.setProperty("hibernate.current_session_context_class", "thread"); configuration.setProperty("hibernate.connection.provider_class", "org.hibernate.connection.C3P0ConnectionProvider"); configuration.setProperty("hibernate.show_sql", "true"); sessionFactory = configuration.configure().buildSessionFactory(); I have been searching for 3 days and no success. What may be de problem?

    Read the article

  • Set up tunnel to HE.net and now only ipv6.google.com works, but other sites ping fine.

    - by AndrejaKo
    I'm setting up IPv6 using my router which is running OpenWRT, version Backfire 10.03.1-rc4. I made a tunnel using Hurricane Electric's tunnel broker and set it up on the router and I'm using RADVD to hand out IPv6 addresses. My problem is that on computers on the network, I can only access ipv6.google.com using a browser, but other sites seem to be loading forever and won't open in any browser. I can ping and traceroute to them fine, but can't open them with a browser. I can open any site normally with a browser from the router. Stopping firewall service on the router doesn't help, so it's probably not a firewall issue. All AAAA records resolve fine, so it's probably not a DNS issue. Computers on the network get their IPv6 addresses fine, so it's probably not a radvd issue. Similar setup worked fine for SixXs, but I'm having problems with my PoP there, so I decided to move to HE. Here are some traceroutes: From a client computer: Tracing route to ipv6.he.net [2001:470:0:64::2] over a maximum of 30 hops: 1 <1 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 62 ms 63 ms 62 ms andrejako-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 60 ms 60 ms 63 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 63 ms 68 ms 68 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 84 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 146 ms 147 ms 151 ms 10gigabitethernet4-4.core1.nyc4.he.net [2001:470:0:128::1] 7 200 ms 198 ms 202 ms 10gigabitethernet5-3.core1.lax1.he.net [2001:470:0:10e::1] 8 219 ms * 210 ms 10gigabitethernet2-2.core1.fmt2.he.net [2001:470:0:18d::1] 9 221 ms 338 ms 209 ms gige-g4-18.core1.fmt1.he.net [2001:470:0:2d::1] 10 206 ms 210 ms 207 ms ipv6.he.net [2001:470:0:64::2] Trace complete. and another from a cliet computer Tracing route to whatismyipv6.com [2001:4870:a24f:2::90] over a maximum of 30 hops: 1 7 ms 1 ms 1 ms 2001:470:1f0b:de5::1 2 69 ms 70 ms 63 ms AndrejaKo-1.tunnel.tserv6.fra1.ipv6.he.net [2001:470:1f0a:de5::1] 3 57 ms 65 ms 58 ms gige-g2-4.core1.fra1.he.net [2001:470:0:69::1] 4 73 ms 74 ms 75 ms 10gigabitethernet1-4.core1.ams1.he.net [2001:470:0:47::1] 5 71 ms 74 ms 76 ms 10gigabitethernet1-4.core1.lon1.he.net [2001:470:0:3f::1] 6 141 ms 149 ms 148 ms 10gigabitethernet2-3.core1.nyc4.he.net [2001:470:0:3e::1] 7 141 ms 147 ms 143 ms 10gigabitethernet1-2.core1.nyc1.he.net [2001:470:0:37::2] 8 144 ms 145 ms 142 ms 2001:504:1::a500:4323:1 9 226 ms 225 ms 218 ms 2001:4870:a240::2 10 220 ms 224 ms 219 ms 2001:4870:a240::2 11 219 ms 218 ms 220 ms 2001:4870:a24f::2 12 221 ms 222 ms 220 ms www.whatismyipv6.com [2001:4870:a24f:2::90] Trace complete. Here's some firewall info on the router: root@OpenWrt:/# iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 syn_flood tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 input_rule all -- 0.0.0.0/0 0.0.0.0/0 input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination zone_wan_MSSFIX all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED forwarding_rule all -- 0.0.0.0/0 0.0.0.0/0 forward all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 output_rule all -- 0.0.0.0/0 0.0.0.0/0 output all -- 0.0.0.0/0 0.0.0.0/0 Chain forward (1 references) target prot opt source destination zone_lan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_forward all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_lan (1 references) target prot opt source destination Chain forwarding_rule (1 references) target prot opt source destination nat_reflection_fwd all -- 0.0.0.0/0 0.0.0.0/0 Chain forwarding_wan (1 references) target prot opt source destination Chain input (1 references) target prot opt source destination zone_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan all -- 0.0.0.0/0 0.0.0.0/0 Chain input_lan (1 references) target prot opt source destination Chain input_rule (1 references) target prot opt source destination Chain input_wan (1 references) target prot opt source destination Chain nat_reflection_fwd (1 references) target prot opt source destination ACCEPT tcp -- 192.168.1.0/24 192.168.1.2 tcp dpt:80 Chain output (1 references) target prot opt source destination zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain output_rule (1 references) target prot opt source destination Chain reject (7 references) target prot opt source destination REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain syn_flood (1 references) target prot opt source destination RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x17/0x02 limit: avg 25/sec burst 50 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan (1 references) target prot opt source destination input_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_MSSFIX (0 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_lan_REJECT (1 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_lan_forward (1 references) target prot opt source destination zone_wan_ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 forwarding_lan all -- 0.0.0.0/0 0.0.0.0/0 zone_lan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan (2 references) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT 41 -- 0.0.0.0/0 0.0.0.0/0 input_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_ACCEPT (2 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_DROP (0 references) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_MSSFIX (1 references) target prot opt source destination TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU TCPMSS tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 TCPMSS clamp to PMTU Chain zone_wan_REJECT (2 references) target prot opt source destination reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 reject all -- 0.0.0.0/0 0.0.0.0/0 Chain zone_wan_forward (2 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 192.168.1.2 forwarding_wan all -- 0.0.0.0/0 0.0.0.0/0 zone_wan_REJECT all -- 0.0.0.0/0 0.0.0.0/0 Here's some routing info: root@OpenWrt:/# ip -f inet6 route 2001:470:1f0a:de5::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 2001:470:1f0b:de5::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev br-lan proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 dev eth0.2 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::/64 via :: dev 6in4-henet proto kernel metric 256 mtu 1280 advmss 1220 hoplimit 0 default dev 6in4-henet metric 1024 mtu 1280 advmss 1220 hoplimit 0 I have computers running windows 7 SP1 and openSUSE 11.3 and all of them have same problem. I also made a thread about this on HE's forum, but it seems that people there are out of ideas what to do.

    Read the article

  • Remote access to internal machine (ssh port-forwarding)

    - by MacUsers
    I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

    Read the article

  • Other processes take over port 80 when restarting Apache - why, and how to solve?

    - by user72149
    I have a CentOS 5.5 server running Apache on port 80 as well as some other applications. All works fine until I for some reason need to restart the httpd process. Doing so returns: sudo /etc/init.d/httpd restart Stopping httpd: [ OK ] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs First I thought perhaps httpd had frozen and was still running, but that was not the case. So I ran netstat to find out what was using port 80: sudo netstat -tlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:7203 *:* LISTEN 24012/java tcp 0 0 localhost.localdomain:smux *:* LISTEN 3547/snmpd tcp 0 0 *:mysql *:* LISTEN 21966/mysqld tcp 0 0 *:ssh *:* LISTEN 3562/sshd tcp 0 0 *:http *:* LISTEN 3780/python26 Turns out that my python process had taken over listening to http in the instant that httpd was restarting. So, I killed python and tried starting httpd again - but ran into the same error. Netstat again: sudo netstat -tlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:7203 *:* LISTEN 24012/java tcp 0 0 localhost.localdomain:smux *:* LISTEN 3547/snmpd tcp 0 0 *:mysql *:* LISTEN 21966/mysqld tcp 0 0 *:ssh *:* LISTEN 3562/sshd tcp 0 0 *:http *:* LISTEN 24012/java Now my java process had taken over listening to http. I killed that too and could then successfully restart httpd. But this is a terrible workaround. Why will these python and java processes start listening to port 80 as soon as httpd is restarted? How to solve? Two other comments. 1) Both java and python processes are started by apache from a php script. But when apache is restarted, they should not be affected. And 2) I have the same setup on two other machines running Ubuntu and there's no problem there. Any ideas? Edit: The Java process listens to port 7203 and the python process supposedly doesn't listen to any port. For some reason, they start listening to port 80 when apache is restarted. This hasn't happened before. On Ubuntu it runs fine. For some reason, on my current CentOS 5.5 machine, this problem arises.

    Read the article

  • Opening the Internet Settings Dialog and using Windows Default Network Settings via Code

    - by Rick Strahl
    Ran into a question from a client the other day that asked how to deal with Internet Connection settings for running  HTTP requests. In this case this is an old FoxPro app and it's using WinInet to handle the actual HTTP connection. Another client asked a similar question about using the IE Web Browser control and configuring connection properties. Regardless of platform or tools used to do HTTP connections, you can probably configure custom connection and proxy settings in your application to configure http connection settings manually. However, this is a repetitive process for each application requires you to track system information in your application which is undesirable. Often it's much easier to rely on the system wide proxy settings that Windows provides via the Internet Settings dialog. The dialog is a Control Panel applet (inetcpl.cpl) and is the same dialog that you see when you pop up Internet Explorer's Options dialog: This dialog controls the Windows connection properties that determine how the Windows HTTP stack connects to the Internet and how Proxy's are used if configured. Depending on how the HTTP client is configured - it can typically inherit and use these global settings. Loading the Settings Dialog Programmatically The settings dialog is a Control Panel applet with the name of: inetcpl.cpl and you can use any Shell execution mechanism (Run dialog, ShellExecute API, Process.Start() in .NET etc.) to invoke the dialog. Changes made there are immediately reflected in any applications that use the default connection settings. In .NET you can simply do this to bring up the Internet Settings dialog with the Connection tab enabled: Process.Start("inetcpl.cpl",",4"); In FoxPro you can simply use the RUN command to execute inetcpl.cpl: lcCmd = "inetcpl.cpl ,4" RUN &lcCmd Using the Default Connection/Proxy Settings When using WinInet you specify the Http connect type in the call to InternetOpen() like this (FoxPro code here): hInetConnection=; InternetOpen(THIS.cUserAgent,0,; THIS.chttpproxyname,THIS.chttpproxybypass,0) The second parameter of 0 specifies that the default system proxy settings should be used and it uses the settings from the Internet Settings Connections tab. Other connection options for HTTP connections include 1 - direct (no proxies and ignore system settings), 3 - explicit Proxy specification. In most situations a connection mode setting of 0 should work. In .NET HTTP connections by default are direct connections and so you need to explicitly specify a default proxy or proxy configuration to use. The easiest way to do this is on the application level in the config file: <configuration> <system.net> <defaultProxy> <proxy bypassonlocal="False" autoDetect="True" usesystemdefault="True" /> </defaultProxy> </system.net> </configuration> You can do the same sort of thing in code specifying the proxy explicitly and using System.Net.WebProxy.GetDefaultProxy(). So when making HTTP calls to Web Services or using the HttpWebRequest class you can set the proxy with: StoreService.Proxy = WebProxy.GetDefaultProxy(); All of this is pretty easy to deal with and in my opinion is a way better choice to managing connection settings than having to track this stuff in your own application. Plus if you use default settings, most of the time it's highly likely that the connection settings are already properly configured making further configuration rare.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Windows  HTTP  .NET  FoxPro   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >