Search Results

Search found 21945 results on 878 pages for 'online services'.

Page 152/878 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

• GPO - Setting not applied, although policy is applied

  - by Kenny Bones

  This is rather strange. In our domain we have several terminal servers and this morning a user reported that no drives are mapped when he logs on to the terminal server. So, I checked Group Policy Results and compare two users. Both users have the exact same policies applied. But for this particular user, the Script section under User Configuration - Policies - Windows Settings is just not there. For the other user, which this is working fine for, it says under the Script section that Winning GPO is Terminal2008, which is the GPO that contains the script section. And the Terminal2008 GPO is applied to both users. Also, the loopback processing is set to Replace. What could be the cause for this? I've never seen this particular issue before. I mean, both users are in the same OU, they log on to the same terminal server and the same policies are applied to both. They do not however have the exact same group memberships, but should that matter? It's not stated that the script should be run only if the user is a member of a certain group either. Not sure if that could be done through that specific setting either.All I know is, the very same policies are applied to both users, in the same OU and the same computer. Meaning, the same policies should be applied? Edit: I just ran Group Policy Results on one of the other terminal servers, which are also in the same OU, and the Scripts section is there! This means that this particular user don't get this setting when he's logged onto this particular server. What could be the cause of this?

  Read the article

• Run c# application from Window task scheduler

  - by purnang.advant

  Hi. I have a desktop application(c#.net), where I call a Web Service. I need to invoke the c#.net application from a Windows Task Scheduler, because I have to plan an execution 4 times all days. Please suggest me, how to do it. Thanks in advance.

  Read the article

• Windows 7 x64: TrustedInstalled.exe is missing

  - by DrStalker

  Windows 7 Ultimate x64. The TrustedInstaller service is failing to start with an error about a file missing, and sure enough C:\Windows\servicing\TrustedInstaller.exe is missing. What is the easiest way to restore this file? I can't run SFC from within Windows, because that results in the error "Windows Resource Protection could not start the repair service"... which happens if the trusted installer service is not running.

  Read the article

• Conflicting ip routes with local table on attaching a virtual network interface

  - by user1071840

  I have an EC2 instance with these ip rules: $ sudo ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default I can attach an elastic network interface to it with a private IP. Say the IP of my machine is 10.1.3.12 and the IP of the interface is 10.1.1.190. As soon as I attach the interface to my machine a new entry is added to the routing policy and local routing table: sudo ip rule show 0: from all lookup local 32765: from 10.1.1.190 lookup 10003 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table local broadcast 10.1.1.0 dev eth3 proto kernel scope link src 10.1.1.190 local 10.1.1.190 dev eth3 proto kernel scope host src 10.1.1.190 broadcast 10.1.1.255 dev eth3 proto kernel scope link src 10.1.1.190 broadcast 10.1.3.0 dev eth0 proto kernel scope link src 10.1.3.12 local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 broadcast 10.1.3.255 dev eth0 proto kernel scope link src 10.1.3.12 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 I can send traffic to this ENI directly from a host that can have the same IP as the host the ENI is attached to. This is where the problem starts. I ran tcpdump on the port in question and saw multiple SYNs going to the ENI with src '10.1.3.12' and destination '10.1.1.190' but didn't see even a single ACK. In my understanding if ACKs were being sent from the ENI they'd have destination as 10.1.3.12 i.e. the same as the local machine's IP and such packets will now be routed as local packets matching local routing policy: local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 I'd like to send all the packets originating from 10.1.1.190 (my ENI) to go back on the same interface i.e. eth3 in this case. Contents of the nee table 10003 are: $ sudo ip route show table 10003 default via 10.1.1.1 dev eth3 I think I can do the following: I don't know if its possible but probably decrease the priority of local table so the packets match the table 10003. Use iptables to mangle these packets and update the local table route to include the mark information But I'm not sure if these are the right approaches.

  Read the article

• Two threads in initializer on rails not working

  - by Luccas

  Initially I was using one thread to listen a queue from amazon and works perfectly. aws.rb Thread.new do my_queue = AWS::SQS::Queue.new(SQSADDR['my_queue']) my_queue.poll do |msg| ... but now I appended another thread to listen another queue: ... Thread.new do my_another_queue = AWS::SQS::Queue.new(SQSADDR['my_another_queue']) my_another_queue.poll do |msg| ... and now it seems to not work. Only the last one receives response... What is going on?

  Read the article

• how to create a home server ?

  - by Eva

  i download appserv and install on my computer and set the default ip in my Default Gateway but when other people want to connect to my home server , they get the error of time out ! what am i going to do ? my server address : http://192.168.210.230/ and my firewall is now off ! also my antivirus pls help me . Thanks in advance

  Read the article

• EC2 Auto-Scaling with Spot and On-Demand Instances?

  - by platforms

  I'm looking to optimize the cost of our auto-scaling EC2 groups by having them launch spot instances instead of on-demand instances. What I really want is to be able to keep some servers in the group as on-demand instances, regardless of what happens to the spot instance pricing market. Then I want any additional servers in the group, above my configured minimum, to be spot instances. I'm generally OK with the delay in adding servers via spot requests. I can't seem to find any way to do this and I've tried to scour the AWS documentation. It appears that an ASG can either be on-demand or spot, but not a hybrid. I could possibly manually add an on-demand instance to the Elastic Load Balancer assigned to the auto-scaling group, but then the load of that server would not be factored into the auto-scaling measurements and triggers. I suppose I could enter a ridiculously high bid price in order to ensure that I always get the servers I need, but then I look at the pricing history and see occasional large spikes. The AWS documentation is at odds with itself, since in one place it says that if you enter a server minimum, that number is "ensured" to be there. But then when you read about spot instances, there are no assurances. The price differential for spot is compelling, so I'd like to leverage that as much as I can while still maintaining an always-on baseline. Is this possible?

  Read the article

• Process keeps creating dump files

  - by Pieter

  We have a Delphi application running on a terminal server that keeps generating dump files. For the same PID, it keeps creating dump files with an interval of around 1 second until the process is killed manually. Another weird thing is the name of the dump files: ±_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_40.dmp ÷_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_42.dmp k_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_39.dmp Ô_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_41.dmp Ž_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_40.dmp The dump files aren't telling us much and we would like to have a suggestion where we should start looking.

  Read the article

• What type of amazon instance should I use and do I need auto scaling and load balancing?

  - by Navetz

  Hi I am looking to release a website that will initially have large amounts of uploads from users. The first will be 65GB and the rest will probably be close to 1TB. They could happen simultaneously. My question is what type of amazon server instance would be best for this? The website is just being released so the traffic wont be very high. I have been using a micro instance for development but it is time to launch and I need more power. Should I use auto scaling and a load balancer to increase the number of instances when I need it or Will a small or medium instance do the trick? If I do use auto scaling and load balancing how do I handle things like sessions and the database/file lookups? Does one instance become the primary instance and the rest become clones?

  Read the article

• "service"-command and environment variables

  - by varesa

  I am trying to start a service that requires a env. variable to be set to certain path. I set this variable in "/etc/profile.d/". However when I start this service using the service command, it doesn't work. man service: service runs a System V init script in as predictable environment as possible, removing most environment variables and with current working directory set to /. So it seems that service is removing my variables. How should I set the variables up to keep them from being removed. Or is that something i should not do. I could start the service manually using the init-scripts, or even hardcode the path into the script, but I'd like to know how to use it with the service command.

  Read the article

• Amazon EC2 Elastic Load Balancing - strategy for zero downtime server restart

  - by Yoga

  I have 5 web servers (Apache/mod_perl) behind Amazon EC2 Elastic Load Balancing, when I deploy codes to the web servers, I am doing this.. For each machine, shutdown the Apache Update the code Start over the server and proceed to the next server I think when my server is shutdown, ELB will not distribute request to my server, but how about the request still serving? I think a better approach is Stop accepting new request from ELB Sleep for sometimes, shutdown web server only if all requests are responded Update the codes Start the server again But how to perform (1) and (2) from my local sever? Do I need to use AWS API? or other easy way to do it? Thanks.

  Read the article

• Provider claiming "all web servers in the cloud are automatically kept in sync" - should I be skeptical?

  - by RobMasters

  I'm no expert in cloud computing - I've spent a fair bit of time researching it and various providers but am yet to get any hands-on experience with it. From what I've read about AWS and auto-scaling EC2 instances though, it seems as though each instance should be completely decoupled from all other instances. i.e. If content is uploaded to the web server's local filesystem from a custom CMS backend then that content won't be available if subsequently requested from a different web server in the auto-scaling group. Is that right? I met with a representative of our existing hosting provider recently and he was claiming that it isn't a problem that our legacy CMS system is highly dependent on having a local filesystem. He said that all web servers, regardless of how many, would be kept as exact duplicates so I shouldn't notice any difference compared to our existing setup of a single dedicated server. This smells a little too much like bull fecal-matter to me...should I be skeptical about this? I'm a little worried because my (non-technical) boss who ultimately makes the decisions is all for signing up to this cloud solution because it won't require any extra work. I'm sure that they must at least be able to provide this, otherwise they wouldn't be attempting to sell it to us. But at what cost? It sounds as though each web server will always need to be checking the other web server(s) for new static content, which to me sounds like unwanted overhead that'll slow things down. I'd really appreciate it if somebody could clear this up to me. I'm all for switching to AWS and using S3+CloudFront for all static content, but that isn't looking very likely to happen at the moment.

  Read the article

• How to combine AWS and dedicated external servers?

  - by rfw21

  I have an extensive network of servers all currently hosted on AWS EC2. For reasons of cost I plan to gradually migrate to dedicated servers where possible. So: How can I best combine AWS and non-AWS servers in my network? Ideally, I should be able to assign internal IP addresses to the external servers, include them in AWS security groups and ensure that all private traffic between my AWS servers and external servers is secure.

  Read the article

• Why does remote desktop connection flash from one PC but not others?

  - by Randy Orrison

  I have 20 PCs (Windows XP) in remote locations connecting to the same server (Windows Server 2003) using Remote Desktop over a VPN. On just one of the PCs the remote desktop screen flashes (redraws) multiple times after connecting, the others don't. The screen resolution is the same: local is 800x600 32bit; RDP file is set to full screen, 256 color; remote when connected is 800x600 8bit color. Any suggestions what the problem might be, or what to investigate next?

  Read the article

• If my Remote Desktop Connection Broker server goes down, can users still access my two Terminal Servers?

  - by Frank Owen

  I would like to setup the Remote Desktop Connection Broker to allow better load balancing of the two terminal servers we have as well as allowing the user to re-establish to the correct server if they get disconnected. My worry is, if I set this up and the server this service is running goes down, does the terminal server stop accepting connections or will they just lose the benefit of having RDCB turned on? I don't want to add another point of failure in this equation unless I have to.

  Read the article

• Can a Windows process continue between sessions?

  - by sofakng

  I'd like to start a process when the PC starts up but before the user logs in. Then, after the user logs in they see the console/gui for already running process. If they logoff, the process will continue to run in the background until they log back in again. Is this possible in Windows Server 2008 R2? It seems perfect for daemon/server applications.

  Read the article

• AWS RDS Mysql with benstalk Hibernate app: Character encoding issue

  - by TeraTon

  I'm running a webapp from amazon rds with tomcat 7 and spring, which uses hibernate as the persistence layer. The application and utf-8 encoding work properly on localhost, but for some reason when I deploy to amazon, the UTF-8 encoding breaks. I use mysql 5.5.27 on amazon rds and the table that we wish to update has collation set to utf8 - utf8_unicode_ci And in hibernate I have set: < prop key="hibernate.connection.charSet"UTF-8 UTF-8 characters get replaced by ??? and this is of course especially bad for passwords and usernames + email as it basically kills them. Anyone else encountered character encoding breaking when deploying to amazon?

  Read the article

• Backing up data (including mysqldumps) to S3

  - by seengee

  We have a web app on a number of servers and we want to add an additional layer of redundancy by backing up the key data to S3. The key data is the MySQL database and a folder containing dynamically created site assets - predominantly images. Some kind of rsync based solution would initially seem the best plan. A couple of years ago we played with S3cmd (in particular s3cmd sync) with some success but we didn't find it particularly reliable although this may have changed since. Its occurred to me though that a rsync solution might not work particularly well with a single db.sql file created with mysqldump and I assume this means the whole database getting transferred each time, with multiple databases of over 1GB this is going to add up to a lot of traffic (and $s) very quickly. With the image files I could simply just transfer files modified within the last day which would be far more simple. What approach should I look at?

  Read the article

• How can I get the size of an Amazon S3 bucket?

  - by Garret Heaton

  I'd like to graph the size (in bytes, and # of items) of an Amazon S3 bucket and am looking for an efficient way to get the data. The s3cmd tools provide a way to get the total file size using s3cmd du s3://bucket_name, but I'm worried about its ability to scale since it looks like it fetches data about every file and calculates its own sum. Since Amazon charges users in GB-Months it seems odd that they don't expose this value directly. Although Amazon's REST API returns the number of items in a bucket, [s3cmd] doesn't seem to expose it. I could do s3cmd ls -r s3://bucket_name | wc -l but that seems like a hack. The Ruby AWS::S3 library looked promising, but only provides the # of bucket items, not the total bucket size. Is anyone aware of any other command line tools or libraries (prefer Perl, PHP, Python, or Ruby) which provide ways of getting this data?

  Read the article

• windows 2008 R2 TS printer security - can't take owership

  - by Ian

  I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers.

  Read the article

• Cheapest High Available Web Server [closed]

  - by xyz

  I would like to create a high-available setup (e.g. a small cluster) for a webserver, i.e. it will run Apache, PHP and MySQL. There will be between 2-8 small websites running with only very little traffic and workload. High availability is however very important. I don't want to be dependent on 1 datacenter, so there must be a minimum of 2 servers placed in different datacenters, and if one server goes down, the user must experience no or only a minimum of downtime - and no data loss. I have considered Amazon AWS using their Elastic Load Balancing, since it is possible to buy 2 EC2 instances in 2 availability zones and set up load balancing and RDS (Multi-AZ). However this seems rather expensive. Using the AWS price calculator http://calculator.s3.amazonaws.com/calc5.html it totals to 185$/month the first year (including the free tier). Are my calculations incorrect or is there a cheaper way to make this HA setup? Best regards

  Read the article

• Why does this service refuse to start on Windows server 2003?

  - by PenguinCoder

  We have a Windows 2003 server with Cebos MQ1 (ver. 7 and ver. GRI) products installed that have been operational for years. After installing Microsoft 2010 C++ Redistributable package needed for other development, the MQ1 GRI service now fails to start. Event logs showed that two additional updates (.NET4 and the 2010 C++ Redistributable SP2) where installed by the redistributable as well. As soon as we discovered the MQ1 service was not starting properly, we removed these three installed packages. However the service still does not start; the dialog that pops up states 'The service started then stopped. '. Event logs when we attempt to start the service show nothing; IE: No errors, crashes, failures, or other information related to this service. Executing the MQ1Serv.exe directly specifies an issue of 'Missing command line operation, must specify install, uninstall and company abbreviation.' sc query MQ1Service(GRI) shows a clean exit for the Win32ExitCode of 0x0. Attempting to reinstall the client or server software gives an error of 'The procedure entry point ReInitializeCriticalSection could not be located in the dynamic link library KERNEL32.dll.' at the 'Registering Libraries' stage. At this point, further research has stated that the required function is in URL.dll and to verify the library is not corrupted. Running an sfc /scannow on the server has replaced a few DLLS; including the URL.DLL to versions from 2005. This actually broke other applications which required a reinstall (one of them being IE 7). After reinstall and updates, url.dll version is 7.0.5730.13 (2009) and Kernel32.dll is version 5.2.3790.4480 (2009). The MQ1 GRI service still will not start, specifying the same error as previous 'Service started then stopped'. Running a disassembler on Kernel32.dll and Url.dll show no functions named ReinitializeCriticalSection. Attempting the reinstall of the MQ1 client and server as well as starting the service again, fails once more. However, setting the compatibility mode on the MQ1 client install exe to 'Windows 95' actually gets the program to install. Setting the compatibility mode on the MQ1 server service does not enable it to start. I have been researching this problem for nearly a week and besides the advice to scan and replace url.dll, have come to no successful conclusions. This service was operational prior to the 2010 C++ install, without any additional parameters or settings. After removing the C++ install and all servicepacks/updates it installed silently, still does not correct the issue of the MQ1 GRI service not starting. Q: Has anyone else run into this or similar issue while attempting to get a service initialized? What have I overlooked or what else can I try in order to get this service started??

  Read the article

• How can I match an AWS account number to a key and secret

  - by iwein

  My client gave me a key and a secret to manage his EC2 things, but to make one of my AMI's available to run I have to fill in the Account Number. Is it possible to deduce the account number from the key and the secret? Obviously I also asked the client for this information, but since it's weekend and I'm not fond of waiting I wanted to see if I could figure it out myself. Have you done this before?

  Read the article

• SSRS report on SharePoint Web Part

  - by MicroSumol

  I have this configuration: DBK- SQL/SSRS/SSAS (includes SharePoint databases) SPK- SharePoint I created a SharePoint Site with an SSL certificate. Then on DBK I setup the SSRS with an SSL. Finaly went back to SharePoint and setup a webpart on a subsite to connect to the SSRS report. The problem comes that the user is asked 2 times to authenticate. Once when he logs into sharepoint, then when he wants to see the SSRS report. Since I am not an expert on SSRS, I am asking is there an easy way to pass the SharePoint credentials to the SSRS report. Would it be easier to install SSRS on SPK? Would that even work or solve my problem?

  Read the article

• get a list of running ec2 instances programmatically

  - by user113981

  Hi i have started with aws and found out that we can get a list of running servers with the aws php sdk. Is there any other way to get the list of all ec2 instances? after getting the list i want to sync the data from one main instances to all the instances. Something like a button click can also do the operation. Are rsync, incron the only options, or it can be done by aws php sdk also. Please provide some tutorial links.

  Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >