Search Results

Search found 5000 results on 200 pages for 'partition alignment'.

Page 153/200 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• Re-assembling the RAID-5 array reboots my CentOS-5 machine

  - by xraminx

  I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

  Read the article

• WSUS setup on ADS Domain Controller VM

  - by NickC

  How should I setup sharing/directory permissions to allow the following to work: VMHost - Hyper-V partition (not part of domain) ADServer - Active Directory Domain Controller running as guest VM on VMHost \VMHost\Updates disk share for WSUS to put the updates and other local files Problem is what permissions do I need to give to \VMHost\Updates to allow WSUS to work with this directory to avoid "The WSUS content directory is not accessible" error which I am currently seeing. As far as I can tell WSUS runs as "domain/Network Service" account. Question is without adding VMHost to the domain how do I give that user appropriate permissions to this directory? Is there a way that VMHost can be told to trust ADServer and then be able to use users accounts from there? Sort of relates to my other post here: Win 2012 Domain controller VM, should the Hyper-V host be part of the domain? Thanks, Nick

  Read the article

• Create an image of a pure Ubuntu-Installation on Macbook Pro

  - by Stefan Müller

  I'm running Ubuntu 11.10 on my Macbook Pro (Late 2009) as the only operating system, so theres's no Mac OS X oder Bootcamp installed. It runs fine and now i'd like to create an image of the current installation. Unfortunately my Acronis True Image cd doesn't boot on this device and my attempts to create an image with partimage or dd from a bootable ubuntu live cd to a external hd failed ("can't read from block 0"). Are there any others out there with such an installation and if yes: how did you succeed in imaging your partition/device?

  Read the article

• Bootcamp's "Use all F1, F2, etc. keys" switches back automatically

  - by cheeesus

  I use Windows 7 in a Bootcamp partition on my iMac. I always check the option "Use all F1, F2, etc. keys as standard function keys", and when it's checked, everything works great. But recently, something switches this setting back to 'unchecked' every few minutes. I constantly have to open the Boot Camp Control Panel, uncheck the checkbox, check it again and click on 'Apply'. And five minutes later, the F2 key again controls the brightness of the screen and not the renaming of files in Explorer. This is driving me mad. What could be the cause of this? Is there a keystroke to switch this feature?

  Read the article

• What could explain my partitions disappearing on a new SSD with Windows 7?

  - by charlesrandall

  So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

  Read the article

• How to locate chrome bookmarks in linux

  - by xenon

  I upgraded from Karmic Koala to Lucid Lynx beta, was working fine for a while (was even rebooting). But, after some time, it is not booting and i cant find a solution. I have tried installing the grub again, doesn't help. Well, the problem is all my settings, bookmarks and passwords are blocked in that partition. I cant find where the Chrome stores bookmarks in Ubuntu. Can you help me either getting my system rebooted or getting the bookmarks ? Thanks. p.s. I am currently on liveusb.

  Read the article

• Fix for OpenSolaris with no gcc vs. Nexenta with no ext3

  - by Jake Wharton

  I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

  Read the article

• Dell poweredge 1850's - wont install os

  - by user1326789

  I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

  Read the article

• Windows system drive letter changed after repair install

  - by taffer

  yesterday I did a repair install, because Windows froze on welcome screen after resizing its partition on a dual boot system. corresponding question Everything worked fine so far, but now I am facing another challenge: The Windows drive letter changed from G: to C:, so that most programs, including drivers, firewall and virus scanner do not work anymore. I tried to reinstall the virus scanner, but the uninstaller said, that drive G: is not available. What to do now, to get all programs running again? Is it possible, to rename C: to G: or will that mess up my system?

  Read the article

• virtual machines and cryptography

  - by Unknown

  I suspect I'm a bit offtopic with the site mission, but it seems me more fitting for the question than stackoverflow i'm in preparing to create a vm with sensible data (personal use, it will be a web+mail+... appliance of sorts), i'd like to protect the data even with cryptography; the final choice have to be cross-platform for the host basically, I have to choose between guest system-level cryptography (say, dm-crypt or similar) or host level cryptography with truecrypt. do you think that the "truecrypt-volume contained virtualized disks" approach will hit the i/o performance of the vm badly (and therefore dm-crypt like approaches into the vm would be better), or is it doable? I'd like to protect all the guest data, not only my personal data, to be able to suspend the vm freely without worrying for the swap partition, etc

  Read the article

• My PC becomes very slow after changing page file in XP.

  - by Jane

  Hello there, I have 5 partitions in my computer (C, D, E, F, G), and C: is the system partition. Recently I changed the page file setting to use 768-768 MB from the G:, without changing the C: default value (256-512 MB). Everything runs fine until I rebooted my PC. I unset the G:'s page file before I rebooted my PC. Well, after I rebooted my PC, my XP becomes VERY slow. damn slow. I don't know how long I wasted to wait for the boot screen to disappear. (Well, maybe about 1-3 mins. Normally it is under 10 secs) and when I tried to enter the desktop, it just like using a computer without a VGA card, or VGA driver installed. Very slow. Any suggestions to fix this problem? Because I hate to repair-install my XP =\ Thanks.

  Read the article

• Ubuntu server 9.10 freezes up after ~10 minutes

  - by Matt Williamson

  I just upgraded my Ubuntu server from 9.04 to 9.10 and after about 10 minutes it locks up. It won't respond to ping, can't ssh in and the terminal doesn't accept keyboard input. It does not have X installed. I then reformatted and installed it from scratch with the same results. There are two hard drives, the first is for the OS and the second is for media. The second has not changed, it is an ext3 formatted drive with one partition. I stopped random services (samba, ushare, transmission-daemon) to see if they were causing the issue, but it still locked up. I did a watch "dmesg|tail" until it locked up, but I didn't see anything. How can I troubleshoot this further? I don't want to downgrade. Machine specs: Dell Dimension 3000 Pentium 4 @3GHz 512M RAM

  Read the article

• View hidden contents of usb device

  - by Srikanth Suresh

  I have a USB with the following contents on ls -lah total 8.0K drwx------ 1 srikanth srikanth 4.0K May 27 22:54 . drwxr-xr-x 4 root root 4.0K May 28 19:37 .. -rw------- 2 srikanth srikanth 0 May 27 22:52 Files.az3w On viewing the properties of the folder I have the following information: 90.4Mb used and 16.1GB free There is data in this pen drive which I am currently unable to view also it is sensitive. After searching about hiding contents in a USB I think that there is a hidden partition here that I cant access. How should I proceed to view the contents without damaging the files already present?

  Read the article

• mprotect - how aligning to multiple of pagesize works?

  - by user299988

  Hi, I am not understanding the 'aligning allocated memory' part from the mprotect usage. I am referring to the code example given on http://linux.die.net/man/2/mprotect char *p; char c; /* Allocate a buffer; it will have the default protection of PROT_READ|PROT_WRITE. */ p = malloc(1024+PAGESIZE-1); if (!p) { perror("Couldn't malloc(1024)"); exit(errno); } /* Align to a multiple of PAGESIZE, assumed to be a power of two */ p = (char *)(((int) p + PAGESIZE-1) & ~(PAGESIZE-1)); c = p[666]; /* Read; ok */ p[666] = 42; /* Write; ok */ /* Mark the buffer read-only. */ if (mprotect(p, 1024, PROT_READ)) { perror("Couldn't mprotect"); exit(errno); } For my understanding, I tried using a PAGESIZE of 16, and 0010 as address of p. I ended up getting 0001 as the result of (((int) p + PAGESIZE-1) & ~(PAGESIZE-1)). Could you please clarify how this whole 'alignment' works? Thanks,

  Read the article

• How can I format a USB drive as FAT from a MacBook Pro?

  - by Edward Tanguay

  I plugged in a 250GB USB hard drive into my MacBook Pro and want to format it in FAT so I can transfer files back and forth between a windows machine. (My windows7 machine only formats in exFAT which my Snow Leopard 2.6.4 doesn't support until I do the update). So I want to format it on the mac. but when I right click on the drive, it gives me the options to eject, copy, but not to format. I can go into Disk Utilities, click on Partition, but the only option is the "Mac Journaled format". How can I Format my USB drive as FAT from my MacBook Pro?

  Read the article

• Why is my mdadm raid-1 recovery so slow?

  - by dimmer

  On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

  Read the article

• Will my Lenovo One Key Recovery work if I install Ubuntu on my Ideapad U410?

  - by dostiharise

  I own a Lenovo Ideapad U410. Being a game developer the first thing that I wanted to do is install Ubuntu. But I don't want to lose the Windows 7 that ships with the laptop. So, I wanted to know if the Lenovo One Key Recovery mechanism is capable of restoring the Windows 7, from the hidden recovery partition, after I install Ubunutu and enable Grub boot loader? Note: I am already aware that an alternative would be to create Factory Restore disks, to restore when necessary. But I cannot immediately do it unless I buy an External DVD Burner.

  Read the article

• Free, Linux-based rescue CD for Windows machines

  - by Adam Matan

  Hi, Too often, I'm being called to help a friend who screwed a Windows machine by some creative methods. Th usual remedy is backing up the hard drive contents and reinstalling. Right now, this is done by removing the defected hard drive to my machine. I figured out that using a rescue disk running some version of Linux might ease the process. I'm looking for: NTFS access Partition tools Large variety of drivers (Network, Hard drives, etc.) GUI and some rescue wizards a great plus. Any ideas? Adam

  Read the article

• Driver for writing to UDF partitions from Windows XP?

  - by davr

  I'm considering using an UDF partition to share data between Windows XP, 7, and Linux. It's more efficient than FAT32, and avoids the 4GB max file size limit. I've found it will also work with Mac OS X, more details in this questions. However, in Windows XP, it is read-only. I'd like to write to it too. Are there any drivers that will allow this? I've found a few that support writing UDF...but they are designed for writing to CDs or DVDs, not specifically for HDDs or USB Flash drives: DLA, InCD, Drag-To-Disc. Will any of those 3 drivers work for HDDs/USB Flash drives? Or is there another driver that will do what I want? Thanks.

  Read the article

• Add centered text to the middle of a <hr/>-like line

  - by Brian M. Hunt

  I'm wondering what options one has in xhtml 1.0 strict to create a line on both sides of text like-so: Section one ----------------------- Next section ----------------------- Section two I've thought of doing some fancy things like this: <div style="float:left; width: 44%;"><hr/></div> <div style="float:right; width: 44%;"><hr/></div> Next section Or alternatively, because the above has problems with alignment (both vertical and horizontal): <table><tr> <td style="width:47%"><hr/></td> <td style="vertical-align:middle; text-align: center">Next section</td> <td style="width:47%"><hr/></td> </tr></table> However both options feel 'fudgy', and I'd be much obliged if you happened to have seen this before and know of an elegant solution. Thank you for reading. Brian

  Read the article

• How to stop scheduled chkdisk on windows 7?

  - by AndrejaKo

  Hi! I have a problem with windows 7 64-bit. I was trying out chkdsk command line options and scheduled a chddsk /r on next start. After that I disassembled the laptop on which I set the chkdsk. After I reassembled it, windows gets normally to the point where it should start the check and then hangs when the countdown reaches 1 second. During the countdown, it doesn't detect any input from keyboard. At first I thought that I didn't correctly install the keyboard, but under GNU/Linux, everything is working fine and I can normally mount the windows partition . So is there any way to stop the scheduled chkdsk? I really don't feel like reinstalling windows again because I just finished setting up my tool-chain the way I like it and compiled about 6GiB worth of dependencies I need for some project I'm working on.

  Read the article

• What is the best way to create RAID 1?

  - by user3125731

  I'm looking for a way to create the RAID 1 array without losing my data on CentOS. Here's my situation: I've got a web server running on CentOS. There is one VG partition with few LV volumes. I bought a second HDD (the same model and size as the first one) and I want to create the RAID 1 configuration. I can't just shut down this server for more than an hour because my clients will be disappointed. I need to do this as quickly as possible with minimal risk of data loss.

  Read the article

• How to rename a BTRFS subvolume?

  - by hochl

  I have a BTRFS filesystem with a set of subvolumes in it. So far so good. I need to change the name of a subvolume, unfortunately the btrfs program does not allow me to rename a subvolume. Searching with Google has yielded some results, one said I can just mv, the other said I can just snapshot to a new name and delete the old subvolume. Before I crash my partition and have to reload it from the backup (it's quite large), my question is: What is the currently best way to rename a subvolume? Is it ok to just mv it, or will it invalidate some internal structures? Is making a new snapshot and removing the old subvolume the way to go, or has this some drawbacks? I know everything is still experimental, but for my purposes it has been working quite well (so far, and I have incremental backups for each day).

  Read the article

• What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

  - by Adam Ryczkowski

  I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

  Read the article

• How to use a custom Windows 7 system drive letter?

  - by Ivan

  The subject PC has many hard drive partitions dedicated for different purposes, C: being a Windows XP system drive and F: (which is actually the next primary partition placed right after C: physically) being intended to host a newly installed Windows 7 instance (meant for "dual boot" configuration). Needless to say the intention was all the partitions to have exactly the same letters under both OSes, needless to say Windows 7 has detected all of them in a completely different order which would not be a problem (as the non-system drives letters can be changed easily after installation) if it wouldn't have named it's system drive C: (meant to be F:), which I have no Idea how to change. Is there a way to set the letter you want? I don't mind reinstalling Windows 7 from scratch if it is to be set at installation time or even configured in some text files on the installation DVD. I have tried this way, but it renders the Windows 7 system desktop unbootable (gets stuck on "Preparing your desktop..." after "Welcome").

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >