Search Results

Search found 43978 results on 1760 pages for 'select case'.

Page 1532/1760 | < Previous Page | 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539  | Next Page >

• MSI install sequence - run DB scripts before services start

  - by marc_s

  Folks, we're running into some sequencing troubles with our MSI install. As part of our app, we install a bunch of services and allow the user to pick whether to start them right away or later. When they start right away, they seem to start too early in the install sequence - before our database manager had a chance to update the database. Right now, our custom action to run the database updater looks like this - it's being run after "InstallFinalize" - very late in the process. <InstallExecuteSequence> <RemoveExistingProducts After='InstallInitialize' /> <Custom Action='RunDbUpdateManagerAction' After='InstallFinalize'> DbUpdateManager=3</Custom> </InstallExecuteSequence> What would be the more appropriate step to run after or before, to make sure the DB scripts are executed before any of the installed services start up? Is there a "BeforeServiceStart" step? EDIT: Just defining the "Before='StartServices'" attribute on the tag didn't solve my problem. I am assuming the issue is this: the custom action has an "inner text", which represents a condition, and this condition is: "&DbUpdateManager=3". From what I can deduce from trial & error, this probably means "the DbUpdateManager feature must be published". Now, trouble is: "PublishFeature" comes way at the end in the install sequence, just before "InstallFinalize", and definitely AFTER InstallServices / StartServices. So when I specify the "Before=StartServices" requirement, the condition "DbUpdateManager feature must be published" isn't true yet, so the DbUpdateManager doesn't get executed :-( I tried removing the condition - in that case, my DbUpdateManager sometimes doesn't execute at all, sometimes more than once - no real clear pattern as to what happens when..... Any more ideas?? Is there a way I could check for a condition "the DbUpdateManager feature is installed" which would be true after the "InstallFiles" step?? Marc

  Read the article

• Is this text wrapping technique possible in CSS and jQuery?

  - by alex

  I have built a sliding text thing for a website. http://www.solomonadventures.com/~new/adventure-tours/seafari-tours/ The background contains the menu (on the right hand side), and when it originally loads, I have placed an element to make the text look like it is wrapping around the menu. Now, I have a sliding text thing I was asked to implement. The buttons to use it are currently in the top left corner. My question is, when I slide the content down, am I able to somehow make the text still wrap around it? This is all I have thought of so far (all with trade offs) Make the text appear beneath the menu - no need to wrap Make the text as narrow to the beginning of the menu - no need to wrap Manually place placeholders in the text that make it line break so it appears to wrap - not elegant (site uses a CMS too) Is there any jQuery selector I could write that would allow me to select the paragraph from top (once slid to the top) or the top most text node (so I could do an after() to place a new placeholder element to force it to wrap?) Any other solutions? Many thanks.

  Read the article

• How to make write operation idempotent?

  - by Morgan Cheng

  I'm reading article about recently release Gizzard sharding framework by twitter(http://engineering.twitter.com/2010/04/introducing-gizzard-framework-for.html). It mentions that all write operations must be idempotent to make sure high reliability. According to wikipedia, "Idempotent operations are operations that can be applied multiple times without changing the result." But, IMHO, in Gazzard case, idempotent write operation should be operations that sequence doesn't matter. Now, my question is: How to make write operation idempotent? The only thing I can image is to have a version number attached to each write. For example, in blog system. Each blog must have a $blog_id and $content. In application level, we always write a blog content like this write($blog_id, $content, $version). The $version is determined to be unique in application level. So, if application first try to set one blog to "Hello world" and second want it to be "Goodbye", the write is idempotent. We have such two write operations: write($blog_id, "Hello world", 1); write($blog_id, "Goodbye", 2); These two operations are supposed to changed two different records in DB. So, no matter how many times and what sequence these two operations executed, the results are same. This is just my understanding. Please correct me if I'm wrong.

  Read the article

• Rendering a CGPDFPage into a UIImage

  - by James Antrobus

  I'm trying to render a CGPDFPage (selected from a CGPDFDocument) into a UIImage to display on a view. I have the following code in MonoTouch which gets me part way there. RectangleF PDFRectangle = new RectangleF(0, 0, UIScreen.MainScreen.Bounds.Width, UIScreen.MainScreen.Bounds.Height); public override void ViewDidLoad () { UIGraphics.BeginImageContext(new SizeF(PDFRectangle.Width, PDFRectangle.Height)); CGContext context = UIGraphics.GetCurrentContext(); context.SaveState(); CGPDFDocument pdfDoc = CGPDFDocument.FromFile("test.pdf"); CGPDFPage pdfPage = pdfDoc.GetPage(1); context.DrawPDFPage(pdfPage); UIImage testImage = UIGraphics.GetImageFromCurrentImageContext(); pdfDoc.Dispose(); context.RestoreState(); UIImageView imageView = new UIImageView(testImage); UIGraphics.EndImageContext(); View.AddSubview(imageView); } A section of the CGPDFPage is displayed but rotated back-to-front and upside down. My question is, how do I select the full pdf page and flip it round to display correctly. I have seen a few examples using ScaleCTM and TranslateCTM but couldn't seem to get them working. Any examples in ObjectiveC are fine, I'll take all the help I can get :) Thanks

  Read the article

• C#; On casting to the SAME class that came from another assembly

  - by G. Stoynev

  For complete separation/decoupling, I've implemented a DAL in an assebly that is simply being copied over via post-build event to the website BIN folder. The website then on Application Start loads that assembly via System.Reflection.Assembly.LoadFile. Again, using reflection, I construct a couple of instances from classes in that assembly. I then store a reference to these instances in the session (HttpContext.Current.Items) Later, when I try to get the object stored in the session, I am not able to cast them to their own types (was trying interfaces initially, but for debugging tried to cast to THEIR OWN TYPES), getting this error: [A]DAL_QSYSCamper.NHibernateSessionBuilder cannot be cast to [B] DAL_QSYSCamper.NHibernateSessionBuilder. Type A originates from 'DAL_QSYSCamper, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' in the context 'Default' at location 'C:\Users\dull.anomal\AppData\Local\Temp\Temporary ASP.NET Files\root\ad6e8bff\70fa2384\assembly\dl3\aaf7a5b0\84f01b09_b10acb01\DAL_QSYSCamper.DLL'. Type B originates from 'DAL_QSYSCamper, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' in the context 'LoadNeither' at location 'C:\Users\dull.anomal\Documents\Projects\QSYS\Deleteme\UI\MVCClient\bin\DAL_QSYSCa mper.DLL'. This is happening while debugging in VS - VS manages to stop into the source DAL project even though I've loaded from assembly and the project is not refferenced by the website project (they're both in the solution). I do understand the error, but I don't understand how and why the assembly is being used/loaded from two locations - I only load it once from the file and there's no referrence to the project. Should mention that I also use Windsor for DI. The object that tries to extract the object from the session is A) from a class from that DAL assembly; B) is injected into a website class by Windsor. I will work on adding some sample code to this question, but wanted to put it out in case it's obvious what I do wrong.

  Read the article

• Elegant Disjunctive Normal Form in Django

  - by Mike

  Let's say I've defined this model: class Identifier(models.Model): user = models.ForeignKey(User) key = models.CharField(max_length=64) value = models.CharField(max_length=255) Each user will have multiple identifiers, each with a key and a value. I am 100% sure I want to keep the design like this, there are external reasons why I'm doing it that I won't go through here, so I'm not interested in changing this. I'd like to develop a function of this sort: def get_users_by_identifiers(**kwargs): # something goes here return users The function will return all users that have one of the key=value pairs specified in **kwargs. Here's an example usage: get_users_by_identifiers(a=1, b=2) This should return all users for whom a=1 or b=2. I've noticed that the way I've set this up, this amounts to a disjunctive normal form...the SQL query would be something like: SELECT DISTINCT(user_id) FROM app_identifier WHERE (key = "a" AND value = "1") OR (key = "b" AND value = "2") ... I feel like there's got to be some elegant way to take the **kwargs input and do a Django filter on it, in just 1-2 lines, to produce this result. I'm new to Django though, so I'm just not sure how to do it. Here's my function now, and I'm completely sure it's not the best way to do it :) def get_users_by_identifiers(**identifiers): users = [] for key, value in identifiers.items(): for identifier in Identifier.objects.filter(key=key, value=value): if not identifier.user in users: users.append(identifier.user) return users Any ideas? :) Thanks!

  Read the article

• Does "delegate" mean a type or an object?

  - by Michal Czardybon

  Reading from MSDN: "A delegate is a type that references a method. Once a delegate is assigned a method, it behaves exactly like that method." Does then "delegate" mean a type or an object?! ...It cannot be both. It seems to me that the single word is used in two different meanings: a type containing a reference to a method of some specified signature, an object of that type, which can be actually called like a method. I would prefer a more precise vocabulary and use "delegate type" for the first case. I have been recently reading a lot about events and delegates and that ambiguity was making me confused many times. Some other uses of "delegate" word in MSDN in the first meaning: "Custom event delegates are needed only when an event generates event data" "A delegate declaration defines a class that is derived from the class System.Delegate" Some other uses of "delegate" word in MSDN in the second meaning: "specify a delegate that will be called upon the occurrence of some event" "Delegates are objects that refer to methods. They are sometimes described as type-safe function pointers" What do you think? Why did people from Microsoft introduced this ambiguity? Am I the only person to have conceptual problems with different notions being referenced with the same word.

  Read the article

• convert SQL Server StoredPorcedure to MySql

  - by karthik

  I need to covert the following SP of SQL Server To MySql. I am new to MySql.. Help needed. CREATE PROC InsertGenerator (@tableName varchar(100)) as --Declare a cursor to retrieve column specific information --for the specified table DECLARE cursCol CURSOR FAST_FORWARD FOR SELECT column_name,data_type FROM information_schema.columns WHERE table_name = @tableName OPEN cursCol DECLARE @string nvarchar(3000) --for storing the first half --of INSERT statement DECLARE @stringData nvarchar(3000) --for storing the data --(VALUES) related statement DECLARE @dataType nvarchar(1000) --data types returned --for respective columns SET @string='INSERT '+@tableName+'(' SET @stringData='' DECLARE @colName nvarchar(50) FETCH NEXT FROM cursCol INTO @colName,@dataType IF @@fetch_status<>0 begin print 'Table '+@tableName+' not found, processing skipped.' close curscol deallocate curscol return END WHILE @@FETCH_STATUS=0 BEGIN IF @dataType in ('varchar','char','nchar','nvarchar') BEGIN SET @stringData=@stringData+'''''''''+ isnull('+@colName+','''')+'''''',''+' END ELSE if @dataType in ('text','ntext') --if the datatype --is text or something else BEGIN SET @stringData=@stringData+'''''''''+ isnull(cast('+@colName+' as varchar(2000)),'''')+'''''',''+' END ELSE IF @dataType = 'money' --because money doesn't get converted --from varchar implicitly BEGIN SET @stringData=@stringData+'''convert(money,''''''+ isnull(cast('+@colName+' as varchar(200)),''0.0000'')+''''''),''+' END ELSE IF @dataType='datetime' BEGIN SET @stringData=@stringData+'''convert(datetime,''''''+ isnull(cast('+@colName+' as varchar(200)),''0'')+''''''),''+' END ELSE IF @dataType='image' BEGIN SET @stringData=@stringData+'''''''''+ isnull(cast(convert(varbinary,'+@colName+') as varchar(6)),''0'')+'''''',''+' END ELSE --presuming the data type is int,bit,numeric,decimal BEGIN SET @stringData=@stringData+'''''''''+ isnull(cast('+@colName+' as varchar(200)),''0'')+'''''',''+' END SET @string=@string+@colName+',' FETCH NEXT FROM cursCol INTO @colName,@dataType END

  Read the article

• How to face observable object containing an observable field

  - by iseek

  Hello, I need a hint concerning MVC and Observer-Pattern. For example a model contains the classes "Address" and "Person". The Address class contains the fields street:String, zipcode:String, location:String. Whereas the Person class contains the fields name:String, firstName:String, address:Address. My approach so far looks something like this: Both, Address and Person are observable. If one of their setters is being called, I validate whether the current value and new value differ. Only in this case an update event is fired. The event contains the source, the name of the changed field, the old and the new value. The class for the view contains text fields to display and edit the information of a person: name, firstname, street, zipcode, location. It knows the Person model and is an subscribed observer for the person. So it gets the update events from the person object. My questions concerns the address field from type Address in the person class, since an address is observable on its own. If the view gets an update event from person when a new address has been set, I can update all of the address related fields in the view. But what if a field of the address changes? Should the view also register for update events from the address? Any hints about common design approaches would be appreciated. Greetings.

  Read the article

• Is it necessary to var scope loop variables in CFScript?

  - by Mel

  When using CFML and CF9 I usually var scope my loop variables; in this case local.i, for example: <cfloop list="#this.list#" index="local.i"> <cfif Len(local.i) GT 10> // do something </cfif> </cfloop> I recently started converting some stuff into CFScript, and (to my disappointment I found out that there is no way to loop over a list in CFScript) I'm wondering if I should still var scope my loop variables, and how: for (i = 1; LTE ListLen(this.list); i = i + 1 ) { if (Len(ListGetAt(this.list, i) GT 10)) { // do something } } Should I be doing local.i = 1 and local.i = local.i + 1 istead of the sample code in my example? Is it necessary? EDIT: I should also ask if the CFScript form of my CFML loop is correct; I ask because I just noticed that my CFML loop uses a , (comma and space) for the delimiter argument, which seems non-existence in the CFScript version of the loop.

  Read the article

• Big-O for GPS data

  - by HH

  A non-critical GPS module use lists because it needs to be modifiable, new routes added, new distances calculated, continuos comparisons. Well so I thought but my team member wrote something I am very hard to get into. His pseudo code int k =0; a[][] <- create mapModuleNearbyDotList -array //CPU O(n) for(j = 1 to n) // O(nlog(m)) for(i =1 to n) for(k = 1 to n) if(dot is nearby) adj[i][j]=min(adj[i][j], adj[i][k] + adj[k][j]); His ideas transformations of lists to tables His worst case time complexity is O(n^3), where n is number of elements in his so-called table. Exception to the last point with Finite structure: O(mlog(n)) where n is number of vertices and m is an arbitrary constants Questions about his ideas why to waste resources to transform constantly-modified lists to table? Fast? only point where I to some extent agree but cannot understand the same upper limits n for each for-loops -- perhaps he supposed it circular why does the code take O(mlog(n)) to proceed in time as finite structure? The term finite may be wrong, explicit?

  Read the article

• Atomic operations on several transactionless external systems

  - by simendsjo

  Say you have an application connecting 3 different external systems. You need to update something in all 3. In case of a failure, you need to roll back the operations. This is not a hard thing to implement, but say operation 3 fails, and when rolling back, the rollback for operation 1 fails! Now the first external system is in an invalid state... I'm thinking a possible solution is to shut down the application and forcing a manual fix of the external system, but then again... It might already have used this information (and perhaps that's why it failed), or we might not have sufficient access. Or it might not even be a good way to rollback the action! Are there some good ways of handling such cases? EDIT: Some application details.. It's a multi user web application. Most of the work is done with scheduled jobs (through Quartz.Net), so most operations is run in it's own thread. Some user actions should trigger jobs that update several systems though. The external systems are somewhat unstable. I Was thinking of changing the application to use the Command and Unit Of Work pattern

  Read the article

• linq to xml enumerating over descendants

  - by gh9

  Hi trying to write a simple linq query from a tutorial I read. But i cannot seem to get it to work. I am trying to display both the address in the attached xml document, but can only display the first one. Can someone help me figure out why both aren't being printed. Thank you very much <?xml version="1.0" encoding="utf-8" ?> <Emails> <Email group="FooBar"> <Subject>Test subject</Subject> <Content>Test Content</Content> <EmailTo> <Address>[email protected]</Address> <Address>[email protected]</Address> </EmailTo> </Email> </Emails> Dim steve = (From email In emailList.Descendants("Email") _ Where (email.Attribute("group").Value.Equals("FooBar")) _ Select content = email.Element("EmailTo").Descendants("Address")).ToList() If Not steve Is Nothing Then For Each addr In steve Console.WriteLine(addr.Value) Next Console.ReadLine() End If

  Read the article

• media.set_xx giving me grief!

  - by Firas

  New guy here. I asked a while back about a sprite recolouring program that I was having difficulty with and got some great responses. Basically, I tried to write a program that would recolour pixels of all the pictures in a given folder from one given colour to another. I believe I have it down, but, now the program is telling me that I have an invalid value specified for the red component of my colour. (ValueError: Invalid red value specified.), even though it's only being changed from 64 to 56. Any help on the matter would be appreciated! (Here's the code, in case I messed up somewhere else; It's in Python): import os import media import sys def recolour(old, new, folder): old_list = old.split(' ') new_list = new.split(' ') folder_location = os.path.join('C:\', 'Users', 'Owner', 'Spriting', folder) for filename in os.listdir (folder): current_file = media.load_picture(folder_location + '\\' + filename) for pix in current_file: if (media.get_red(pix) == int(old_list[0])) and \ (media.get_green(pix) == int(old_list[1])) and \ (media.get_blue(pix) == int(old_list[2])): media.set_red(pix, new_list[0]) media.set_green(pix, new_list[1]) media.set_blue(pix, new_list[2]) media.save(pic) if name == 'main': while 1: old = str(raw_input('Please insert the original RGB component, separated by a single space: ')) if old == 'quit': sys.exit(0) new = str(raw_input('Please insert the new RGB component, separated by a single space: ')) if new == 'quit': sys.exit(0) folder = str(raw_input('Please insert the name of the folder you wish to modify: ')) if folder == 'quit': sys.exit(0) else: recolour(old, new, folder)

  Read the article

• Behavior difference between UIView.subviews and [NSView subviews]

  - by zpasternack

  I have a piece of code in an iPhone app, which removes all subviews from a UIView subclass. It looks like this: NSArray* subViews = self.subviews; for( UIView *aView in subViews ) { [aView removeFromSuperview]; } This works fine. In fact, I never really gave it much thought until I tried nearly the same thing in a Mac OS X app (from an NSView subclass): NSArray* subViews = [self subviews]; for( NSView *aView in subViews ) { [aView removeFromSuperview]; } That totally doesn’t work. Specifically, at runtime, I get this: *** Collection <NSCFArray: 0x1005208a0> was mutated while being enumerated. I ended up doing it like so: NSArray* subViews = [[self subviews] copy]; for( NSView *aView in subViews ) { [aView removeFromSuperview]; } [subViews release]; That's fine. What’s bugging me, though, is why does it work on the iPhone? subviews is a copy property: @property(nonatomic,readonly,copy) NSArray *subviews; My first thought was, maybe @synthesize’d getters return a copy when the copy attribute is specified. The doc is clear on the semantics of copy for setters, but doesn’t appear to say either way for getters (or at least, it’s not apparent to me). And actually, doing a few tests of my own, this clearly does not seem to be the case. Which is good, I think returning a copy would be problematic, for a few reasons. So the question is: how does the above code work on the iPhone? NSView is clearly returning a pointer to the actual array of subviews, and perhaps UIView isn’t. Perhaps it’s simply an implementation detail of UIView, and I shouldn’t get worked up about it. Can anyone offer any insight?

  Read the article

• f# pattern matching with types

  - by philbrowndotcom

  I'm trying to recursively print out all an objects properties and sub-type properties etc. My object model is as follows... type suggestedFooWidget = { value: float ; hasIncreasedSinceLastPeriod: bool ; } type firmIdentifier = { firmId: int ; firmName: string ; } type authorIdentifier = { authorId: int ; authorName: string ; firm: firmIdentifier ; } type denormalizedSuggestedFooWidgets = { id: int ; ticker: string ; direction: string ; author: authorIdentifier ; totalAbsoluteWidget: suggestedFooWidget ; totalSectorWidget: suggestedFooWidget ; totalExchangeWidget: suggestedFooWidget ; todaysAbsoluteWidget: suggestedFooWidget ; msdAbsoluteWidget: suggestedFooWidget ; msdSectorWidget: suggestedFooWidget ; msdExchangeWidget: suggestedFooWidget ; } And my recursion is based on the following pattern matching... let rec printObj (o : obj) (sb : StringBuilder) (depth : int) let props = o.GetType().GetProperties() let enumer = props.GetEnumerator() while enumer.MoveNext() do let currObj = (enumer.Current : obj) ignore <| match currObj with | :? string as s -> sb.Append(s.ToString()) | :? bool as c -> sb.Append(c.ToString()) | :? int as i -> sb.Append(i.ToString()) | :? float as i -> sb.Append(i.ToString()) | _ -> printObj currObj sb (depth + 1) sb In the debugger I see that currObj is of type string, int, float, etc but it always jumps to the defualt case at the bottom. Any idea why this is happening?

  Read the article

• Obtaining FontMetrics before getting a Graphics instance

  - by Tom Castle

  Typically, I'd obtain a graphics instance something like this: BufferedImage img = new BufferedImage(width, height, BufferedImage.TYPE_INT_ARGB); Graphics2D g = img.createGraphics(); However, in the current project I'm working on, the width and height variables above are dependent upon the size of a number of text fragments that will later be drawn onto the graphics instance. But, to obtain the dimensions of the font being used I would usually use the FontMetrics that I get from the graphics object. FontMetrics metrics = g.getFontMetrics(); So, I have a nasty little dependency cycle. I cannot create the graphics object until I know the size of the text, and I cannot know the size of the text until I have a graphics object. One solution is just to create another BufferedImage/Graphics pair first in order to get the FontMetrics instance I need, but this seems unnecessary. So, is there a nicer way? Or is it the case that the width, height etc. properties for a Font are somehow dependent upon what (graphics, component...) the text is to be drawn on?

  Read the article

• selection issue in listview or TreeView

  - by Maneesh

  Hello i have a list view control, While the form is being loaded i fill the list, i have aprrox. say 100+ items. While filling i check some parameters and decide which item/row need to be selected. i set the Selected property to true... refer the code below: some lines here ..... ListViewItem listViewItem = new ListViewItem("COL1"); listViewItem.SubItems.Add("COL2"); check for some condition and then listViewItem.Selected = true; this.m_lstViewCtrl.Items.Add(listViewItem); This does select the item, there are no issues with it... however, say the ctrl is sized to see onlu say some 15 items, but the selection is say some 35th item.... currently the scroll bar appears the item is selected but i have to scroll to see what was selected? is it possible to scroll to the selected item so that is selection is clearly visible... Will the same apply for a Treeview?

  Read the article

• Whose fault is a NullReferenceException?

  - by stefan.at.wpf

  I'm currently working on a class which exposes an internal List through a property. The List shall and can be modified. The problem is, entries in the internal list could be set to null from outside the class. My code actually looks like this: class ClassWithList { List<object> _list = new List<object>(); // get accessor, which however returns the reference to the list, // therefore the list can be modified (this is intended) public List<object> Data { get { return _list; } } private void doSomeWorkWithTheList() { foreach(object obj in _list) // do some work with the objects in the list without checking for null. } } So now in the doSomeWorkWithTheList() I could always check whether the current list entry is null or I could just asume that the person using this class doesn't have the great idea to set entries to null. So finally the questions end up in: Whose fault is a NullReferenceException in this case? Is it the fault of the class developer not checking everything for null (which would make code generally - not only in this class - more complex) or is it the fault of the user of this class, as setting a List entry to null doesn't really make sense? I'd tend to generally not check values for null except in some really special cases. Is this a bad style or de facto standard / standard in praxis? I know there's probably no ultimate answer for this, I'm just missing enough experience for such thing and therefore wondering what other developers think about such cases and want to hear what's done in reality about checking null (or not).

  Read the article

• XUL: Printing value from SQL query without using value attribute

  - by Grip

  I want to print the results of an SQL query in XUL with word-wrapping using the description tag. I have the following code: <grid> <columns> <column flex="2" /> <column flex="1" /> </columns> <rows datasources="chrome://glossary/content/db/development.sqlite3" ref="?" querytype="storage" > <template> <query>select distinct * from Terms</query> <action> <row uri="?"> <description value="?name" /> <description value="?desc" /> </row> </action> </template> </rows> This works for printing the data, but since I'm using the value attribute of description, there's no word-wrapping. I don't understand entirely what I'm doing with the value attribute, but I don't seem to be able to get the values of my SQL query in any other way. So, how could I get those values without the value tag? Thanks.

  Read the article

• Matlab fft function

  - by CTZStef

  The code below is from the Matlab 2011a help about fft function. I think there is a problem here : why do they multiply t(1:50) by Fs, and then say it's time in millisecond ? Certainly, it happens to be true in this very particular case, but change the value of Fs to, say, 2000, and it won't work anymore, obviously because of this factor of 2. Right ? Quite misleading, isn't it ? What do I miss ? Fs = 1000; % Sampling frequency T = 1/Fs; % Sample time L = 1000; % Length of signal t = (0:L-1)*T; % Time vector % Sum of a 50 Hz sinusoid and a 120 Hz sinusoid x = 0.7*sin(2*pi*50*t) + sin(2*pi*120*t); y = x + 2*randn(size(t)); % Sinusoids plus noise plot(Fs*t(1:50),y(1:50)) title('Signal Corrupted with Zero-Mean Random Noise') xlabel('time (milliseconds)') Clearer with this : fs = 2000; % Sampling frequency T = 1 / fs; % Sample time L = 1000; % Length of signal t2 = (0:L-1)*T; % Time vector f = 50; % signal frequency s2 = sin(2*pi*f*t2); figure, plot(fs*t2(1:50),s2(1:50)); % NOT good figure, plot(t2(1:50),s2(1:50)); % good

  Read the article

• Is this a bug? Or is it a setting in ASP.NET 4 (or MVC 2)?

  - by John Gietzen

  I just recently started trying out T4MVC and I like the idea of eliminating magic strings. However, when trying to use it on my master page for my stylesheets, I get this: <link href="<%: Links.Content.site_css %>" rel="stylesheet" type="text/css" /> rending like this: <link href="&lt;%: Links.Content.site_css %>" rel="stylesheet" type="text/css" /> Whereas these render correctly: <link href="<%: Url.Content("~/Content/Site.css") %>" rel="stylesheet" type="text/css" /> <link href="<%: Links.Content.site_css + "" %>" rel="stylesheet" type="text/css" /> It appears that, as long as I have double quotes inside of the code segment, it works. But when I put anything else in there, it escapes the leading "less than". Is this something I can turn off? Is this a bug? Edit: This does not happen for <script src="..." ... />, nor does it happen for <a href="...">. Edit 2: Minimal case: <link href="<%: string.Empty %>" /> vs <link href="<%: "" %>" />

  Read the article

• WordPress website getting hung up for 10-15 seconds

  - by synergy989

  Problem I have a website (which loads fine): http://testupg.videve.com/ Go to the blog section (and it begins to load, gets hung up, then loads): http://testupg.videve.com/blog/ It's all one WordPress install. The only pages that are getting hung up are the blog page itself and any article page. The video pages load fine etc. What Have I done and noticed. If I disable all plugins, the blog page loads fine. I narrowed it down to DisplayBuddy plugins (Featured posts, Carousel, Slider)...as soon as I enable any single one of them, the site loads slow. The thing that doesn't make sense is, I disabled the sidebar (deleted it from the template) and the article page still loaded slow and it has ZERO instances of this plugin. I disable the plugin and the article page loads fine. How on earth can this be? I am hoping this case above can give just a little bit of insight! One other thing. The video pages use a custom taxonomy so I am wondering if its something to do with the default wordpress taxonomy. Any help is GREATLY appreciated, I have been at this thing for hours and it's time to call in some support. Cheers

  Read the article

• Adding integer value to a list from XML file

  - by Pramodh

  I've an Xml file like <SampleFile> <Data> <Element Val="8" /> <Element Val="10" /> <Element Val="12" /> <Element Val="14" /> <Element Val="16" /> <Element Val="9" /> <Element Val="11" /> <Element Val="13" /> <Element Val="15" /> <Element Val="17" /> </Data> </SampleFile> i need to read the attribute value of" Val" and convert it to Int32 , then sort and then add to the list now i'm using like: List<Int32> lst = (XDocument.Load("\\Sample.xml").Descendants("Element").Select(l_Temp => l_Temp.Attribute("Val").Value.ToString()).Cast<Int32>().OrderBy(nTemp => nTemp)).ToList(); but its not working properly please give me a better solution

  Read the article

• IndexOutOfRangeException when a stream is a multiple of the buffer size

  - by dnord

  I don't have a lot of experience with streams and buffers, but I'm having to do it for a project, and I'm stuck on an exception being thrown when the stream I'm reading is a multiple of the buffer size I've chosen. Let me show you: My code starts by reading bufferSize (100, let's say) bytes from the stream: numberOfBytesRead = DataReader.GetBytes(0, index, output, 0, bufferSize); Then, I loop through a while loop: while (numberOfBytesRead == bufferSize) { BufferWriter.Write(output); BufferWriter.Flush(); index += bufferSize; numberOfBytesRead = DataReader.GetBytes(0, index, output, 0, bufferSize); } ... and, once we get to a non-bufferSize read, we know we've hit the end of the stream and can move on. But if the bufferSize is 100, and the stream is 200, we'll read positions 0-99, 100-199, and then the attempt to read 200-299 errors out. I'd like it if it returned 0, but it throws an error. What I'm doing to handle that is, well, a try-catch: catch (System.IndexOutOfRangeException) numberOfBytesRead = 0; ...which ends the loop, and successfully finishes the thing, but we all know I don't want to control code flow with error handling. Is there a better (more standard?) way to handle stream reading when the stream length is unknown? This seems like a small wrinkle in a fairly reasonable strategy for reading streams, but I just don't know if I've got it wrong or what. The specifics of this (which I've cleaned up a little bit for posting) are a MySqlDataReader hitting a LARGEBLOB column. It's working whenever the buffer is larger than the number of returned bytes, or when the number of returned bytes is not a multiple of bufferSize. Because we don't, in that case, throw an IndexOutOfRangeException.

  Read the article

< Previous Page | 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539  | Next Page >