Search Results

Search found 11685 results on 468 pages for 'intel core i5'.

Page 154/468 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

  • ASUS P6X58D and 12 GB of RAM

    - by Hunter
    I just assembled my new PC and it screams, BUT it's only recognizing 8 GB of RAM in BIOS and OS rather than the installed 12 GB. In the BIOS the RAM was registering at 1066 MHz so I set it to 1600 MHz. I updated the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS: Windows 7 Ultimate 64-bit Motherboard: ASUS P6X58D Premium CPU: Intel Core i7 920 RAM: CORSAIR XMS3 12 GB (6 x 2 GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD: Intel 80 GB SSD SATA II Power supply: Kingwin 1000 W Modular I've installed the Beta BIOS 0808 but no luck!

    Read the article

  • South migration error: NoMigrations exception for django.contrib.auth

    - by danpalmer
    I have been using South on my project for a while, but I recently did a huge amount of development and changed development machine and I think something messed up in the process. The project works fine, but I can't apply migrations. Whenever I try to apply a migration I get the following traceback: danpalmer:pest Dan$ python manage.py migrate frontend Traceback (most recent call last): File "manage.py", line 11, in <module> execute_manager(settings) File "/Library/Python/2.6/site-packages/django/core/management/__init__.py", line 362, in execute_manager utility.execute() File "/Library/Python/2.6/site-packages/django/core/management/__init__.py", line 303, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/Library/Python/2.6/site-packages/django/core/management/base.py", line 195, in run_from_argv self.execute(*args, **options.__dict__) File "/Library/Python/2.6/site-packages/django/core/management/base.py", line 222, in execute output = self.handle(*args, **options) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/management/commands/migrate.py", line 102, in handle delete_ghosts = delete_ghosts, File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/__init__.py", line 182, in migrate_app applied = check_migration_histories(applied, delete_ghosts) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/__init__.py", line 85, in check_migration_histories m = h.get_migration() File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/models.py", line 34, in get_migration return self.get_migrations().migration(self.migration) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/models.py", line 31, in get_migrations return Migrations(self.app_name) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/base.py", line 60, in __call__ self.instances[app_label] = super(MigrationsMetaclass, self).__call__(app_label_to_app_module(app_label), **kwds) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/base.py", line 88, in __init__ self.set_application(application, force_creation, verbose_creation) File "/Library/Python/2.6/site-packages/South-0.7-py2.6.egg/south/migration/base.py", line 159, in set_application raise exceptions.NoMigrations(application) south.exceptions.NoMigrations: Application '<module 'django.contrib.auth' from '/Library/Python/2.6/site-packages/django/contrib/auth/__init__.pyc'>' has no migrations. I am not that experienced with South and I haven't met this error before. The only helpful mention I can find online about this error is for pre-0.7 I think and I am on South 0.7. I ran 'easy_install -U South' just to make sure. Thanks for any help that you can provide. I really appreciate it.

    Read the article

  • Is it possible to use a dual processor computer as your desktop?

    - by Ivo
    I've seen some people suggesting to get a motherboard that supports two processors and stick two Xeon Nehalem processors in it. Could you use this system as a desktop PC or is this useless or even impossible? It's more hypothetical question if Windows 7 would support such a set-up. I know you could just take an i7, but wouldn't two of those processors be a whole lot more awesome? Like the previous generation Skulltrails? The idea would be to have a motherboard like this ASUS Z8NA-D6C Dual LGA 1366 Intel 5500 ATX and two Xeons (since I don't think i7's could be used) Intel Xeon E5405 Harpertown to run something like Windows 7 Ultimate.

    Read the article

  • Why is mod_wsgi not able to write data? IOError: failed to write data

    - by BryanWheelock
    What could be causing this error: $ sudo tail -n 100 /var/log/apache2/error.log' [Wed Dec 29 15:20:03 2010] [error] [client 220.181.108.181] mod_wsgi (pid=20343): Exception occurred processing WSGI script '/home/username/public_html/idm.wsgi'. [Wed Dec 29 15:20:03 2010] [error] [client 220.181.108.181] IOError: failed to write data Here is the WSGI script: $ cat public_html/idm.wsgi import os import sys sys.path.append('/home/username/public_html/IDM_app/') os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() Why would Django not be able to write data? I'm running Django 1.2.4

    Read the article

  • VMWare Guest NIC Teaming

    - by Justin Popa
    We're looking to add additional bandwidth to a VM running on an ESXi cluster running 5.1. How can I team these within the VM? I suspect I need to add a second e1000 and then install some Intel software to team them. Any idea which version of Intel driver? Is there some better software to use? EDIT: Sorry, neglected some information. The guest OS is Win2k8R2. The physical NICs on the host are 1Gbps. The reason this has come up is we are seeing the VM hitting near cap on the capability of a single 1Gbps link (Usually at 100-110MBps, bursting to 130s, but I think that may just be a UI math lie) and we're interested in seeing if adding an additional NIC in a teamed setting will increase the overall throughput.

    Read the article

  • Mac OSX Server - Mac Mini to XServe Migration

    - by notpeter
    If I build out a Mac OSX Server install on a Mac Mini and then when it's ready for production I image the disks to an XServe, is there any reason the resulting system won't just work? Assuming I'm able to keep the same IP address are there any other issues I should be aware of? I'll be running minimal services, just AFP, SMB and Open Directory. TMI: My Intel XServe is full of cruft. Was originally a G4 XServe running 10.3, upgraded to 10.4 then migrated to 10.5 on the Intel XServe. I'd like a clean start, but can't spare the XServe downtime while I build out the install, can I just use a Mac Mini for dev and then switch to the XServe for production.

    Read the article

  • Any porting available of backtrace for uclibc?

    - by user303967
    We are running the uclibc linux on ARM 9. The problem is uclibc doesn't support backtrace. When a core dump happens, I cannot grab the call stack. Does anyone have a good solution for that? For example, an existing porting of backtrace for uclibc, or any good method to grab the call stack when a core dump happens (uclibc+ARM+Linux)?

    Read the article

  • How can I get 32-bit Direct3D working on my 64-bit Windows 7 system?

    - by Daniel Stutzbach
    I recently upgraded a Dell Inspiron 6400 to Windows 7 Ultimate 64-bit. I have a 32-bit 3D application that refuses to run, giving an error of "Failed to initialise [sic] Direct3D device". The dxdiag tool tells me: DirectDraw Acceleration: Enabled Direct3D Acceleration: Not Available However, the 64-bit version of dxdiag tells me: DirectDraw Acceleration: Enabled Direct3D: Enabled I have installed and re-installed the latest graphics drivers, as well as the DirectX 9 redistributable, but it stills fails in the same way. dxdiag reports the chipset name as the "Mobile Intel(R) 945 Express Chipset Family" with the the Chip Type as "Intel(R) GMA 950". The main driver is igdumd64.dll, version 8.15.10.1930. How can I get 32-bit Direct3D working?

    Read the article

  • SQL Performance Problem IA64

    - by Vendoran
    We’ve got a performance problem in production. QA and DEV environments are 2 instances on the same physical server: Windows 2003 Enterprise SP2, 32 GB RAM, 1 Quad 3.5 GHz Intel Xeon X5270 (4 cores x64), SQL 2005 SP3 (9.0.4262), SAN Drives Prod: Windows 2003 Datacenter SP2, 64 GB RAM, 4 Dual Core 1.6 GHz Intel Family 80000002, Model 6 Itanium (8 cores IA64), SQL 2005 SP3 (9.0.4262), SAN Drives, Veritas Cluster I am seeing excessive Signal Wait Percentages ( 250%) and Page Reads /s (50) and Page Writes /s (25) are both high occasionally. I did test this query on both QA and PROD and it has the same execution plan and even the same stats: SELECT top 40000000 * INTO dbo.tmp_tbl FROM dbo.tbl GO Scan count 1, logical reads 429564, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. As you can see it’s just logical reads, however: QA: 0:48 Prod: 2:18 So It seems like a processor related issue, however I’m not sure where to go next, any ideas? Thanks, Aaron

    Read the article

  • Debian Lenny - network interfaces(eth) are in DOWN state

    - by pachanga
    Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

    Read the article

  • JPA @ManyToOne and composite PK

    - by Fleuri F
    Good Morning, I am working on project using JPA. I need to use a @ManyToOne mapping on a class that has three primary keys. You can find the errors and the classes after this. If anyone has an idea! Thanks in advance! FF javax.persistence.PersistenceException: No Persistence provider for EntityManager named JTA_pacePersistence: Provider named oracle.toplink.essentials.PersistenceProvider threw unexpected exception at create EntityManagerFactory: javax.persistence.PersistenceException javax.persistence.PersistenceException: Exception [TOPLINK-28018] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.EntityManagerSetupException Exception Description: predeploy for PersistenceUnit [JTA_pacePersistence] failed. Internal Exception: Exception [TOPLINK-7220] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.ValidationException Exception Description: The @JoinColumns on the annotated element [private java.util.Set isd.pacepersistence.common.Action.permissions] from the entity class [class isd.pacepersistence.common.Action] is incomplete. When the source entity class uses a composite primary key, a @JoinColumn must be specified for each join column using the @JoinColumns. Both the name and the referenceColumnName elements must be specified in each such @JoinColumn. at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:643) at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.createEntityManagerFactory(EntityManagerFactoryProvider.java:196) at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:110) at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:83) at isd.pacepersistence.common.DataMapper.(Unknown Source) at isd.pacepersistence.server.MainServlet.getDebugCase(Unknown Source) at isd.pacepersistence.server.MainServlet.doGet(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:718) at javax.servlet.http.HttpServlet.service(HttpServlet.java:831) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:290) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202) There is the source code of my classes : Action : @Entity @Table(name="action") public class Action { @Id @GeneratedValue(strategy=GenerationType.IDENTITY) private int num; @ManyToOne(cascade= { CascadeType.PERSIST, CascadeType.MERGE, CascadeType.REFRESH }) @JoinColumn(name="domain_num") private Domain domain; private String name; private String description; @OneToMany @JoinTable(name="permission", joinColumns= { @JoinColumn(name="action_num", referencedColumnName="action_num", nullable=false, updatable=false) }, inverseJoinColumns= { @JoinColumn(name="num") }) private Set<Permission> permissions; public Action() { } Permission : @SuppressWarnings("serial") @Entity @Table(name="permission") public class Permission implements Serializable { @EmbeddedId private PermissionPK primaryKey; @ManyToOne @JoinColumn(name="action_num", insertable=false, updatable=false) private Action action; @ManyToOne @JoinColumn(name="entity_num", insertable=false, updatable=false) private isd.pacepersistence.common.Entity entity; @ManyToOne @JoinColumn(name="class_num", insertable=false, updatable=false) private Clazz clazz; private String kondition; public Permission() { } PermissionPK : @SuppressWarnings("serial") @Entity @Table(name="permission") public class Permission implements Serializable { @EmbeddedId private PermissionPK primaryKey; @ManyToOne @JoinColumn(name="action_num", insertable=false, updatable=false) private Action action; @ManyToOne @JoinColumn(name="entity_num", insertable=false, updatable=false) private isd.pacepersistence.common.Entity entity; @ManyToOne @JoinColumn(name="class_num", insertable=false, updatable=false) private Clazz clazz; private String kondition; public Permission() { }

    Read the article

  • Can't Use Switchable Graphics

    - by Rev
    I can't get my switchable graphics cards working on my Acer 4820TG laptop. It came installed with Windows 7, but I've installed the RTM build of Windows 8. I have to keep the "Graphics" setting on the BIOS set to "Discrete," if it's set to "Switchable" the screen turns black after the boot animation is complete. The machine has an Intel graphics card and an AMD Mobility Radeon HD 5650, and I know that the Intel card is working. I've seen it work a couple of times with Windows 8 installed, but for some reason it just doesn't anymore. I know that it's not broken, because when I plug in a secondary monitor, and move the cursor to the right, I can see it on that monitor. Are there drivers or something I need to install? I've tried a number of drivers and utilities from Acer's website, none of which have fixed the problem.

    Read the article

  • Any way to stop VMWare workstation from dropping SSH connections?

    - by oljones
    I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

    Read the article

  • greyed out folder in OS X

    - by vectorizor
    Hi all, I installed the intel compiler on my Mac (10.6), and it installed fine, but the folder in which it is installed (/opt, i.e. at the root) is not visible by default, and when I use the Finder "go to" feature, it appears, but as greyed out. What does it mean? I also checked out the permissions, and the only odd thing is that there is an @ at the end of permissions. Any ideas? I'm asking because while the intel compiler is installed (all the files are there), I cant use it from XCode (3.2), and I'm wondering whether this could be why. Thank in advance A

    Read the article

  • Operation System Clone from a Motherboard to Another

    - by Devian
    Lately we had an idea with my Family of building a Super Computer from Scratch. So while we were planning on building our setup, one idea came to my head that it seems possible but i want also your opinions. Lets say that we have 2 ATX Motherboards and 1 MicroATX. Motherboard Setup: 1x ASUS Rampage Extreme Black Edition 1x Intel Core i7 4960x 4x GTX Titan 8x 8GB 1866 Ram Motherboard Setup: 1x SuperMicro X9DRG-QF 2x Intel Xeon E7-8890V2 1x nVIDIA QUADRO K6000 4x nVIDIA Tesla K40 128 GB 1866 Ram And imagine a Solid State Drive with a Switch connected to both of the MotherBoards Can i edit & copy all the data of The first motherboard's RAM to The Other's to be able to continue operating my current Operation System after switching the SSD to the Second Motherboard, from the Second MotherBoard and vice versa? Les say my "Switch Application" modifies everything the Kernel needs to believe nothing happend and continuing its operation from the same point the first motherboard stopped. (Changes on the Device List, CPU Cores, Drivers... etc)

    Read the article

  • Failures when copying between two external drives on the same controller

    - by Krzysztof Kosinski
    I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

    Read the article

  • Hooking up a laptop to an HDTV via VGA

    - by Redandwhite
    I have a 2-3 year old laptop running XBMC, and I have an HDTV that I'd like to connect it to. The only output that the laptop has is VGA (and S-Video - I don't know if the TV supports it) . The TV doesn't support VGA input, but takes HDMI. -- Is it worth buying a VGA-to-HDMI converter? As in this: -- Are there any other, cheaper options available? There's a lot of information around the WWW, but a lot of it's outdated and it's hard to digest everything. I know of at least one other option, and that's a USB to HDMI connection, but I don't even know what to look for or where to get started on that one. I also suspect it might be a little more complicated. If it's cheaper then it could be worth it. EDIT More Details: Intel integrated graphics card (Intel 945 Express Chipset Family) The TV supports up to 1080p resolution

    Read the article

  • learning programing language concepts

    - by user309322
    As a student teacher i am very interested in how effective "mini languages" such as Scratch, Logo, Alice and Lego mindstorms are in teaching the pupil the core concepts of programing such as variables, fuctions and loops. Is one "mini language" better than another for teaching these basic core concepts ?

    Read the article

  • How to record my voice on a Mac Mini with headphones?

    - by user718408
    I'm try to record my voice via the headphone on a Mac Mini, but it's not working. I saw on Apple's site that the Mac Mini can record voice, but it doesn't seem to be working for me. Here is a hardware overview: Model Name: Mac Mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.26 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 4 GB Audio: Make: Intel High Definition Audio Audio ID: 65 Headphone connection: Combination Output Line Input connection: Combination Input Speaker connection: Internal S/PDIF Optical Digital Audio Output connection: Combination Output S/PDIF Optical Digital Audio Input connection: Combination Input Any ideas how I can successfully get recording working?

    Read the article

  • Error with using "dynamic" keyword in Silverlight app

    - by joemoe
    I get the following error: "One or more types required to compile a dynamic expression cannot be found. Are you missing references to Microsoft.CSharp.dll and System.Core.dll" I do have System.Core.dll, do have I to find Microsoft.CSharp somewhere? It wasn't part of the project and it isn't in the references list.

    Read the article

  • Asus P6X58D & 12GB of RAM

    - by Hunter
    I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

    Read the article

  • Weird routing issue (updated)

    - by smccloud
    I just updated the route tables due to a mistake on my part. I am working on getting networking working correctly on a cluster of 14 virtual servers at a customer site. 11 of them work fine for routing and 3 don't work correctly for their administrative network (172.28.56.0). All are running Windows Web Server 2008R2. Default gateway is set on the production network (172.28.58.0) and not on the administrative network (handled with persistent static routes). On a working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX00 0c 29 85 b2 98 ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 15...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.11 266 10.18.1.22 255.255.255.255 172.28.58.1 172.28.58.11 11 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.0 255.255.255.0 On-link 172.28.56.201 266 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.201 255.255.255.255 On-link 172.28.56.201 266 172.28.56.255 255.255.255.255 On-link 172.28.56.201 266 172.28.58.0 255.255.255.224 On-link 172.28.58.11 266 172.28.58.0 255.255.255.224 172.28.58.1 172.28.58.11 11 172.28.58.1 255.255.255.255 172.28.58.1 172.28.58.11 11 172.28.58.11 255.255.255.255 On-link 172.28.58.11 266 172.28.58.31 255.255.255.255 On-link 172.28.58.11 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.201 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.201 266 224.0.0.0 240.0.0.0 On-link 172.28.58.11 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.28.56.201 266 255.255.255.255 255.255.255.255 On-link 172.28.58.11 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None On one of the non-working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.21 266 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.211 255.255.255.255 On-link 172.28.56.211 266 172.28.58.0 255.255.255.0 172.28.58.1 172.28.58.21 11 172.28.58.0 255.255.255.224 On-link 172.28.58.21 266 172.28.58.21 255.255.255.255 On-link 172.28.58.21 266 172.28.58.31 255.255.255.255 On-link 172.28.58.21 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.211 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.211 266 224.0.0.0 240.0.0.0 On-link 172.28.58.21 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 06 255.255.255.255 255.255.255.255 On-link 172.28.56.211 266 255.255.255.255 255.255.255.255 On-link 172.28.58.21 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default 172.28.58.0 255.255.255.0 172.28.58.1 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I am at a complete loss why the non-working servers have no On-link route for 172.28.56.0. Does anyone have any suggestions on what I should be looking at to figure this out? Also, I do have "physical" access to the console if needed through vSphere Client.

    Read the article

  • What will happen with my RAID5 after motherboard change?

    - by abatishchev
    Currently I have ASUS P5Q-EM and 3 HDD in RAID5 using it's on-board RAID controller Intel ICH10R. I want to bye a new motherboard, for example, Gigabyte GA-EQ45M-S2 which also have on-board RAID controller, but Intel ICH10DO. What will happen with my data on RAID5? Will I have to re-create the array from the scratch and lost all my data? Is such array a soft RAID or soft-hard? What if my current motherboard will broken? What will happen with my data?

    Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >