Search Results

Search found 9093 results on 364 pages for 'three cups'.

Page 154/364 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Why ping another inet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• Why can't I open my Access application in design mode?

  - by mmyers

  I have been given an Access 2007 application (mainly VB code) that I need to modify. It has been locked down for production, so the toolbars and so forth are not visible. However, it is a .mdb file, not .mde, so in theory it should be possible to get into design mode by holding Shift while opening it. But that method has only worked a total of three times out of the (probably) 60 or 70 times I've tried. I realize now that I should have enabled the toolbars while I had it open, but unfortunately hindsight doesn't get me anywhere now. Does anyone know what might be causing the problem? Is it my own fault, or the application's, or Access's?

  Read the article

• Dediced server for all network functions?

  - by Alan

  I want to set up a fictional network configuration for a school in my neighborhood. They have about 50 computers altogether, 2X20 in computer rooms for students and another 10 scattered around for various professors. They should all access the internet through a dedicated Linux router machine. What they would like is to have domain names for those three computer groups. Lab1, Lab2 and Professors. The computers in Lab2 and Lab1 should have static ip and should all be named by numbers. So there should be 1@Lab1, 2@Lab1.... etc. And the Professors network should have a DHCP, with authentication. Is it an ok solution to have all these functions on a single server? (The one which will be used as a router) Do I have to set a local DNS for domain naming? Do the host names for Lab computers have to be set on the clients, or can they be automatically assigned?

  Read the article

• Remote X-windows between new RHEL5 and old Solaris 8

  - by joshxdr

  I have a very small lab network with three boxes: a modern x86-based RHEL3 box, an x86-based RHEL5 box, and a 1998-vintage SPARC Ultra5 with Solaris 8. I can use ssh -X to run a program on the RHEL5 box and view the windows on the RHEL3 box. I believe this uses xauth and magic cookies?? I have followed the X-Windows HOWTO to set up xauth on the Solaris box, but so far no dice. I would like to be able to use the X-windows server on the RHEL3 box with a client program on the Solaris box (program running on Solaris host, windows appearing at Linux host). Is there a trick to this, or have I made a mistake following the instructions for setting up xauth and magic cookie?

  Read the article

• How do I turn off caching in IIS7?

  - by jammus

  Hello. I'm developing an ASP classic site under Windows 7 (form a queue ladies). The problem is IIS seems to be heavily making use of its cache for both static and dynamic content which really conflicts with my 'make a small change, alt-tab, hit ctrl-F5' development style. Changes made to .asp files may take two or three refreshes to show up where as changes to .js files can take 20 times as many. How do I go about turning the caching off on my development machine? Cheers. in b4 stop using asp classic

  Read the article

• Word suddenly always on top, how to get rid of this?

  - by Abel

  For one reason or another, my Word suddenly decided to stay always on top of all other windows. This is terribly annoying. The odd thing is: of three documents I have open, two are on top of everything else, and one behaves normal. I found one other mention of this behavior. I wonder whether this is a known bug and whether there's a workaround. Sometimes closing all windows helps, but later the behavior creeps back. Other Office products don't seem to show this behavior. I'm using Microsoft Office Professional Plus 2010, 14.0.4760.1000 (64 bit).

  Read the article

• .htaccess enabled, but not working.

  - by Aristotle

  I been having some very frustrating issues with getting .htaccess to work on my new server. I'm not very experienced in managing a server, but I've spent the last three days pouring over documentation and every resource I can get my hands on. I've attempted to try a very basic application of .htaccess, and yet it fails to give the expected results. I've setup a test over at http://173.201.185.217/test/. Immediately within this directory is an .htaccess file with the following command: deny from all If I'm not mistaken, this should deny access to /test, but it doesn't. It just sits there allowing anybody to view the contents. What could be wrong with my server/configuration? The server is running CentOS.

  Read the article

• Windows 7 Pro - "domain" like login screen appeared

  - by Adrian

  I'm setting up a new PC with the Windows 7 Pro. After some actions (software installing, config changes, applying updates ), my login screen looks like the PC is connected to the domain: I have checked the settings and everywhere the "workgroup" is checked. I have been googling for three hours trying some solutions (Control UserPasswords2, regedit and the ".DEFAULT" key) but nothing works. I cannot see the user icons - only the login screen as above. I cannot also change the account icon. Has anybody seen such an issue?

  Read the article

• Connecting guest OS to host os internet connection hyper-v

  - by autrevo

  Hyper-V internal switch and VM OS interfacing with Guest OS and IP Cofiguration When configuring hyper-v internal switch, Apart from physical lan adapter (say adapter 1), I see another LAN adapter (say adapter 2) added in host os. And we already have one virtual lan adapter in guest os, (say adapter 3) . adapter 1 is connected to internet with defaulty gateway say, 192.168.0.254 and uses class C IP. By con configuring adapter 2 and 3, I need to acheive two purpose - Access internet in guest os. seemlessly share files & folders between guest and host OS. Please, suggest, What is the best way to configure IP of these three adapters ?

  Read the article

• Moving FederatedEmail/SystemMailbox from One Store to Another - Exchange 2010

  - by ThaKidd

  Hello all. Just upgraded from Exchange 2003 to 2010. Somehow, I have two mailbox databases on my single Exchange 2010 server. One database contains all of the mailboxes I had moved from the 2003 exchange server; the other contains two SystemMailboxes and one FederatedEmail box. I am just starting to get a grasp on the commands used in the EMS. I was wondering if someone could point me in the right direction to move these three "system" mailboxes into my actual mailbox database so I can eliminate the second database. Just trying to sure up this one server before I role out my backup Exchange server. Thanks in advance! Your help and ideas are greatly appreciated as I try to make this setup as simple as possible.

  Read the article

• What is the best solution for letting both Macs and PCs access digital images and videos on a networ

  - by Gertbert

  I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

  Read the article

• Kerberos authentication between 2 applications

  - by Spivi

  We work on a server 2003 and server 2008 R2 enviroment. I'm familiar with the basic usage of the Kerberos protocol where the protocol authenticates a client when he tries to use a shared resource (server, folder, printer, etc.). We have three distinct and independent .NET applications that we develop inhouse (app A, app B & app C) but they need to communicate for a given reason (A recieves messages only from B and C and C recieves messages only from B). Is it possible to configure the Kerberos services to authenticate messages/request between two .NET apps ? (Instead of a user-server authentication, we will have an application-application authentication)

  Read the article

• Map specific keys in emacs - Ubuntu

  - by Josh

  On my Mac, I have remapped the capslock key to be another Ctrl, and the key to the right of control to be M (meta?). It was real easy, the capslock was in sys prefs, and the M key was a pref in terminal. I cannot figure out how to do it on my Ubuntu 10.10 computer though. There was no remap capslock that I could find under any of the three keyboard pref menu items, and there are no prefs under the terminal that I can find. Can someone advise? I want the windows key on the keyboard to be M, if that matters. tl;dr; Ubuntu 10.10: Map capslock as Ctrl and Windows key as Meta (emacs) Thanks! EDIT: Found Capslock under System - Prefs - Keyboard - Layouts - USA - Options - Ctrl Key Position - Make CapsLock an additional Ctrl

  Read the article

• Installing Ubuntu next to Windows XP

  - by jess

  I have iso image for Ubuntu 11.0.4 on a CD. My OS is windows XP. I have 3 partions c, E and F. Windows is installed on C, and F has data. E is empty drive. Now, after I start installation , I choose the third option. Then click forward and I am shown three figures -- /dev/sda1 52427(total)/50931(used) /dev/sda5 52427(total)/3221(used) -- surprised, since it should be empty. I had used wubi to install earlier but have uninstalled. /dev/sda5 215206(total)/37545(used) Now, it means I need to choose sda5. Now how should I go about creating 3 partions for /(root), /home and /swap. Click edit partion and give size for each of them?

  Read the article

• Why does MOVE command in DOS treat wildcard patterns oddly in this case?

  - by Adisak

  I am using the "move" command with a wildcard pattern in the CMD prompt under Windows 7. In my source directory, I have the following files: movie1.avi movie1.avi_metadata movie2.avi movie2.avi_metadata If I type the command move source\*.avi dest it will move all four files even though I would expect it to only move the two *.avi files and not the *.avi_metadata files. As expected, move source\*.a dest and move source\*.av dest don't move any files. However when the length of the extension for the wildcard pattern is 3 characters, it will move all extensions that begin with those first three characters. Is this a bug in the "move" command or expected behavior and is it documented anywhere? Edit: John Watts notes that this is probably do to "short" filenames. Is it possible then to make commands in the CMD interpreter only operate on long filenames and to ignore short filenames?

  Read the article

• Windows: Is there something to see and remotely control single(!) windows on a remote PC?

  - by Horst Walter

  Is there something where I can see and control single(!) windows of PC1 on PC2 remotely. Basically like it is possible with X-Windows. I am not talking / asking about A software which displays the whole desktop remotely (like VNC, Windows RDP). A X-windows server for windows, to connect to Linux. The answer here ( Windows Remote Desktop Connection for just a single window (or a single program) ) requires Windows Server 2008. I need to run this on two Windows 7 machines. Example: PC1 shows three windows, and I transfer, see, and control window 2 on PC2. -- Edit -- I have checked whether there is an X-Server for Windows <- Windows. But there seems not to be one other than Unix <- Windows: http://stackoverflow.com/questions/40453/what-is-a-good-and-free-x-server-for-windows

  Read the article

• Create setenv.sh to set system property

  - by user3475398

  I have to use setenv.sh to set system properties. I am using Linux OS and Tomcat Server 6. As described here Linux Environment- setenv.sh , I have created a setenv.sh in tomcat/bin, and the only think I added is the export JAVA_OPTS =”-Dmyprojectvar.subname=value -Danothervariable=value -Danother.variable=value” I dont know, is this enough to set the properties. I just want to add three properties to tomcat as system property using setenv.sh. What should I do to complete it successfully? What are the steps for it?I saw this question setenv.sh is not working in http://stackoverflow.com/. No is answer given there and ,even ,I don't understand the question. ie, Do we need to set CATALINA_HOME and other properties somewhere in setenv.sh?.

  Read the article

• What is the method to reset the Planar 1910m monitor?

  - by Richard J Foster

  My monitor (a Planar, apparently model number PL1910M) is not working. (It is flashing a green / orange sequence which I believe to be an error code. The sequence, in case it helps consists of orange and green three times quickly followed by a longer orange, then another green followed by a long period where both colors appear to be present). I vaguely recall a co-worker suffering from a similar problem, and our IT department "resetting" the monitor by holding down a certain set of keys as they apply power. Unfortunately, I do not remember what that key sequence was, our IT department is not responding, and the Planar web site is blocked by the content filtering firewall we have in place! What is the sequence to perform the reset? (For bonus geek-credit, what does the code mean... as if it indicates a blown component clearly a reset will not help me. ;-))

  Read the article

• PC is randomly shutting off

  - by Bobby

  I have a PC which is randomly shutting off (the hard way, like someone pulled the plug). It's no heat problem, because this can happen after 2 minutes of operation or after 4 hours and I checked the temperature. It's also no problem of the operation system, because it will also do that while in BIOS. If it happens once, you can be sure that it will happen within the next hour another two or three times, and then it works again for over a week or even longer. Possible causes I've thought about so far are: Voltage Fluctuation Loose contact (already replugged all cables within the PC, no luck) Faulty PSU Maybe someone has more ideas to this? P.s.: I don't have the hardware specs with me right now, I'll post them as soon as I get them.

  Read the article

• Logs being flooded from Squid for having intercepted and authentication enabled together

  - by Horace

  I have done some hefty Google'ing and I can't seem to find a single solution to this issue that I cam currently experiencing. Here is a sample configuration from squid that I have: # # DIGEST Auth # auth_param digest program /usr/sbin/digest_file_auth /etc/squid/digpass auth_param digest children 8 auth_param digest realm LHPROJECTS.LAN Network Proxy auth_param digest nonce_garbage_interval 10 minutes auth_param digest nonce_max_duration 45 minutes auth_param digest nonce_max_count 100 auth_param digest nonce_strictness on # Squid normally listens to port 3128 # Squid normally listens to port 3128 http_port 192.168.10.2:3128 transparent https_port 192.168.10.2:3128 intercept http_port 192.168.10.2:3130 As noted above, I have three ports defined, 2 of them are transparent/intercept and one is a regular http port (which I use for authentication). Which works rather well in this configuration however my logs are getting flooded of this entry authentication not applicable on intercepted requests whenever a transparent connection is made. So far, I can't seem to find any documentation that would describe how to suppress these messages ?

  Read the article

• VMWare Workstation 8, Sharing a VM without copying them to "Shared VMs location"

  - by Stebi

  I have a host computer (Win7-64) with three different harddrives. It runs several VMs which are distributed among those harddrives for a better performance. Now with VMWare Workstation 8 it is possible to "share" the VMs. I'd like to use this feature, but I have to convert the VMs to "Shared VMs". When I try this WMWare forces me to copy the VMs to one predefined folder, thus making my effort of distributing the VMs among the harddrives meaningless. Is there any possibility to keep the VMs where they are and share them anyway?

  Read the article

• Outlook Express hangs when selecting multiple emails

  - by Javier Badia

  I'm using Outlook Express (6, I think) on Windows XP. Lately, it has been hanging. Sometimes this happens at startup (right after the main window with all the panes loads) and sometimes when selecting many emails (sometimes as low as three emails at once, sometimes at ten, it's not a fixed number). When this happens, msimn.exe starts to use 98-100% CPU and RAM usage shoots up very quickly, reaching hundreds of megabytes in half a minute. The message pane goes gray instead of showing the message contents. As I said, this sometimes happens right after the main window loads, sometimes when selecting many emails at once. I tried backing up everything, deleting the identities, creating a new one and restoring, but this still happens.

  Read the article

• FreeBSD after motherboard replacement; should I have any concerns?

  - by cc

  So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

  Read the article

• Own website fails to load first time

  - by AmazingDreams

  I have a website running on a VPS, every time I first try to load the website the connection times out. If I press try again, it loads directly. I'm not sure whether this is a DNS issue or a server issue. As far as I know everything is set up correctly. Also, it has been doing this from the moment I got this server and set up my domain name. And that's about two to three months ago. You may take a look here: http://www.wegotcha.nl/ As you can see at this moment it's just an image, there are no scripts running in the background or anything. The only error Apache gives me is that favicon.ico cannot be found. It's an Apache webserver running on Ubuntu 12.04.1 (newest version) I update all packages almost every day (apt-get update && apt-get upgrade). I am merely an amateur on the area of webservers so any help will be appreciated. :)

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >