Search Results

Search found 5789 results on 232 pages for 'tuner card'.

Page 154/232 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• BackTrack5 R2 video driver works, but presents disturbing error message

  - by poz2k4444

  I've installed backtrack 5 R2 on my computer and everything works fine but the video driver. The solution described here does work, but whenever I start the graphics mode, a message saying that the graphics card doesn't support the configuration that is loaded. I don't know why this is happening. It doesn't change the performance of my computer, but I'd like to know why the message is arising, and what I can do to stop it. Alternatively, where can I find the configuration file that would help me understand what's going on?

  Read the article

• Computer won't power on

  - by briskmojo

  Was working fine for over a year, now won't boot. LEDs on the GFX card and one on the MOBO labeled PWR glow when plugged in, but nothing happens when I push power and shorting switch pins does nothing either. If I pop out the CMOS battery and put it back in then try the fans lurch but nothing happens. Shorting the 15 and 16 pins turns the PSU on, and when the 24pin connector is attached to the MOBO it will start up briefly then stop. If I plug in the CPU header it returns to what I described, no power but will lurch after replacing the CMOS battery. Should I be shopping for a new PSU or is there another problem maybe?

  Read the article

• Offline installer for Windows 8?

  - by duncan12

  I have a computer repair service, and can see a few more people wanting Windows 8 updowngraded. Because of New Zealand's internet speeds it takes 1-2 hours to run the download part of the official Windows 8 upgrade tool. This means I have to go back to people the next day. I would like to keep an "offline" version of the Windows 8 upgrade tool on my flash drive, so I can avoid this inconvenience. Obviously it would still require a legit credit card etc, it just comes with the download part not needed. I cannot find such a tool. Does one exist?

  Read the article

• SuperMicro IPMI through OpenBSD PF Firewall

  - by thelsdj

  I'm trying to access a SuperMicro IPMI card that is behind an OpenBSD bridged firewall. A couple pieces of information: The OpenBSD firewall itself has a SuperMicro IPMI that I can access across the internet. The IPMI I'm trying to reach can be reached from behind the firewall. My gateway does arp request the IPMI and it does appear to respond (this is from the external interface of the firewall) 16:57:45.548892 arp who-has ipminame tell gwname 16:57:45.549500 arp reply ipminame is-at ipmimac But when I make a request to the IPMI IP from outside the firewall the external interface of the firewall shows no traffic with the IPMI ip as its destination. Any idea what might be causing this problem? Is there something about IPMI traffic that my gateway wouldn't like (the gateway is provided by my colocation provider so I can't easily debug it).

  Read the article

• Weird video problem with Linux variants

  - by alex

  I decided recently I wanted to give Linux a go so I first download a Ubuntu boot CD. The boot menu came up fine, and then a glowing Ubuntu logo was in the middle of the screen for a while. Then the screen was flickering orange and black. I guess this is where the GUI should of came up. Pushing Ctrl+Alt+F1 brought me to the command prompt OK. I thought this may have something to do with Ubuntu, so I downloaded Linux Mint. The same sort of thing happened. It booted fine, displayed it's logo for a while and then flickered, only green and black this time. Does this sound like a video card problem? How can I resolve this? Many thanks

  Read the article

• HP ML115 with P400 Smart Array Controller

  - by John

  Hi, I have a HP ML115 server I have installed a HP P400 Smart Array Controller card, I also have 4 x 1TB Samsung Hard drives. I'm unable to get the the controller to detect the hard drives, I have changed the drives to SATA 1.5G without luck, I have also tried connecting a single 80GB Maxtor drive without luck The controller shows up just after boot and tries to initialize, The controller does not show up in the POST prompt, although I can see the controller when booting off a ACU CD THe controller firmware is a little old v4.12 but I have no way to update it. Any ideas on how I can get this going?

  Read the article

• Fullscreen Video stutters on second monitor laptop

  - by nobrandheroes

  Fullscreen video on my new 1080p monitor is choppy when it comes from my laptop. The same video plays when not full screen. This goes for all video(Flash/MKV, etc), regardless of video resolution. I have an ATI Mobility Radeon HD 4200 Series card in my Thinkpad Edge, Turion X2 2GHz. The computer plays 1080p fine. Things I've tried: Updating Drivers Switching cables Turning Hardware Acceleration Changing video players process priority Rebooting Turning of laptop screen Turning off unused processes Nothing Works. What is the likelyhood that my laptop cannot power a 1920x1280 display?

  Read the article

• Missing eth0 configuration file

  - by Godric Seer

  I have two servers both running Scientific Linux 6 on the same network. Since I want SSH access to both of them, I want to give them both static IPs so I can setup port forwarding and not worry how my router assigns local IPs. I found that I need to edit the configuration file /etc/network-scripts/ifcng-eth0, however that file does not exist. The network card works fine, and I am able to ssh as long as I access the router and find the local ip. Can I simply make my own configuration file, or did I miss some step in configuring the system that I need to complete?

  Read the article

• ADSL connetion (BSNL dataone) with puppy Linux

  - by Vaibhav Garg

  I have an old PC which I want to use for internet browsing. I tried using Puppy Linux (version 4.3.1) for the same but have not been able to connect. I connect via PPPoE. My network card is RTL 8029b which is automatically detected by Puppy Linux. However, the LED indicator on the MODEM designating LAN connectivity stays off. This post is being typed from the same PC running XP, so there are no connection issues. I am a complete newbie for Linux. can somebody point me to instructions. I will be willing to give any more information if required. P.S. My MODEM is Huewei Smartax MT 882 Thanks

  Read the article

• Leightweight Linux distro to install on my old PC

  - by Juri

  Hi, I have an old PC at home which is mainly used by my Mom or my brother just to browse the web and maybe open some PDFs / docs. Till now I had Win2000 installed, but it performs very poorly. So I thought about installing Linux on it. Could someone give me some suggestions for a leightweight Linux distribution which works well?? Is standard Ubuntu too heavy?? PC details CPU: Athlon AMD ~1211 MHz RAM: 1GB Grafics Card: NVidia GeForce FX 5200 (not so relevant,but still) Thx for your suggestions.

  Read the article

• Chromebook, Crouton & “External Drive” is it possible to rename the folder?

  - by Cyril N.

  I have a Chromebook where I installed Crouton. I have plugged an SD Card and Chromebook detects it as "External Drive". In my Ubuntu instance, it's located at /media/removable/External Drive/ but this poses some problems for executing some applications I have installed on that external drive. In order to fix the problem, I need to remove all the spaces in the path, which is located in "External Drive". My question is simple, is it possible to move/rename the mount name "External Drive" to something else and doing it automatically at every mount/boot ? Thank you for your help !

  Read the article

• make vnc server listen on guest's ip address

  - by gucki

  My host system has the IP 192.168.0.250. Now I want to create a kvm guest using a tap device (so the network card of the guest just acts like a "real" one). The guest has a static ip 192.168.0.249 which it setups on his own (no dhcp). To connect to the guest using VNC I can to use the host's IP. So far everything works fine. Now I wonder how I can make the VNC server to listen on the guest's IP address, so I can use the guest's IP address to connect using my vnc client. Of course I cannot use -vnc 192.168.0.249:1 as this IP is not active on the host and so fails with Cannot assign requested address. Can this be done with tap networking at all? If not, how to get it working?

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Newly registered domain name still doesn't show up after 72 hours.

  - by BioGeek

  Seven days ago I ordered a domain name with a local (Belgian) domain name agent. I have already webspace at a shared host in the US, so I filled in their nameservers on the form. I immediately payed with my credit card. Three days ago I received an e-mail from the domain name agent, saying that my domain name was registered with the external nameservers I provided, and that the site would be visible within 24 hours. However, 72 hours after that mail I still can't see my domain name. A whois search shows indeed that my domain is registered on my name,but a ping to the domain returns unknown host and a traceroute gives the similar Name or service not known. What can have gone wrong, and which (Linux) commands can I use to find out. Or should I just be patient and will the domain name eventually be propagated?

  Read the article

• Program shortcuts disappearing in Windows Mobile 2003, any way to get them back?

  - by Carlisle White

  I have a WM2003 device with some programs installed on it and a full backup created and saved to a SD card. If the device runs out of charge for some time (or the battery removed) everything is reseted back to defaults, so the custom programs and configs are gone. When this happens I used to restore the full backup to put everything back to normal again. But I've recently installed TomTom Navigator 7 and for some reason, its shortcut in the "Programs" section is not saved when creating a full backup (with the eBackup app provided) and the installation doesn't create a shortcut in the main screen (as version 6 used to do). Is there any way to make this shortcut persistent? Is there any way to create custom shortcuts in the programs section or in the main screen (preferably)? Thank you very much for your help, anything is welcomed.

  Read the article

• Linux and GeForce 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GeForce 8400 GS with two connected monitors. I tried with Fedora 12 and Ubuntu 9.10 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on Ubuntu, it simply hangs up during the boot. With Fedora I get this error: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Do I need to install something else? (a driver for my video card for example).

  Read the article

• VirtualBox networking problem, host XP, guest Debian

  - by Silma

  Hi, I'm trying to set up a development environment in a virtual machine on my laptop, with debian os. I have both lan and wlan available on the host machine, yet I can't connect to the internet using either. As I said the host OS is windows XP and the guest OS will be the latest Debian, we downloaded the business card net install so we need internet access from the beginning, besides we need the virtual machine to be visible on the local network (for my fellow developers). We tried host-only networking, NAT, bridging, with proxy (the local network uses a proxy to connect to the internet) and without proxy, nothing seems to work. What else can we do? Thanks a lot.

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• Apache2 Doesn't Serve Subdomain Alias

  - by Cyle Hunter

  I'm trying to prefix an existing Rails application with a sub-domain, essentially I want the sub-domain to serve the same application. Right now apache2 serves my application with "www.example.com" or "example.com". I adjusted my sites-available virtualhost in hopes of allowing for "foo.example.com" or "www.foo.example.com" however both instances are met with a domain not found error. Here is my current VirtualHost in /etc/apache2/sites-available/example.com: <VirtualHost *:80> ServerName example.com ServerAlias foo.example.com *.example.com www.foo.example.com www.example.com DocumentRoot /home/user/my_app/public <Directory /home/user/my_app/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> Any ideas? Note, I realized I probably don't need a wild card sub-domain for what I'm trying to do, I simply added that in as a last-ditch effort. Edit: The actual domain is virtualrobotgames.com with the desired subdomain being roboteer.virtualrobotgames.com

  Read the article

• Windows 2012 Server Hyper-V: Cannot see LAN

  - by Samuel

  I have one NIC on the machine loaded XP on the Hyper-V and had chosen the network as virtual switch. No LAN and no internet shows up on the client. Am I missing something? it used to work in 2008-R2. Details: One network card on machine (Qualcomm Atheros AR8131 PIC-E Gigabit Ethernet controller) The virtual machine hard disk is pointing to and existing XP-SP2 hard disk created using VPC 2007 The Virtual machine Network Adapter is setup as Virtual Switch to the real ethernet controller with Enable virtual LAN identification set to 2 (no other virtual machine is created in the system) After the virtual machine boots LAN shows empty in Control Panel Network Connections (this is XP client) and I also cannot access the internet. XP is showing activation prompt but as far as I know it should not disable the network! Virtual network switch is set to External

  Read the article

• Enabling 8021q on a nic

  - by Chris Phillips

  Hi, I'm trying to get a vlan interface on a bonded nic (Centos 5.5) and whilst the interface has been very happily created with vconfig I'm seeing no traffic on it at all. Running tcpdump and tshark on the underlying eth0 I see no sign at all of vlan tags in the traffic, and I'm wondering if there's somethign I'm missing on the server side as the network dept say they are sending me the tagged data. I've got the 8021q module loaded, however under lsmod it shows it's only being used by the cxgb3 module, for an unused onboard iSCSI card, whereas my nics (on an HP DL380 G7) are driven by bnx2 and e1000e modules. Should these modules be listing 8021q as used module? should I have something conrete in /etc/modprobe.conf? Thanks Chris

  Read the article

• Tool to fix video that's out of sync with audio?

  - by Javier Badia

  I'm looking for (preferably free) software for Windows 7 that will allow me to fix an AVI file that has audio out of sync with the video. I tried with Windows Live Movie Maker and VirtualDub and couldn't find out how to do it (if at all possible) on both of them. If any of those can help me, instructions for that would also be nice. Background: I have a RCA-to-USB capture card, which I'm using to transfer VHS casettes and stuff from a video camera to digital format. The problem is that the audio comes out heavily distorted. So instead I connected the audio out from the VCR directly to the computer's line in. This works, but the audio is out of sync, about half a second behind the video. I could spend time trying to fix this issuee, but I think it'll be easier to simply fix the video.

  Read the article

• Creating Shared Wifi Connection on Windows 7 WITHOUT wep/wpa security?

  - by Duncan

  Ok, for some reason I just can't figure this out on Windows 7. Never had an issue with it on Windows XP, never tried in Vista. I realize that I need to create an Ad-Hoc setup which I can do. However I can't get it to share the wireless signal on my laptop. Even if I go into the adapter settings. I need (well, want) to connect my old Psion netBook to my home network and due to the wireless card, I can't have any form of security. Thanks in advance!

  Read the article

• Digital Blue Digital Movie Creator 3.0 driver

  - by user27977

  I'm having a complete 'mare of a time trying to use my schools Digital Blue cameras. We've got the model 3 ones, but can't find the driver disc and using the Windows Hardware Installation Wizard gets me no where! Can you help me to find the driver? When I've used it at my old school it had a piece of software called the Digital Movie Creator, which I've heard you can use to make stop-motion films, which is what I want to do! This is what it looks like http://www.amazon.co.uk/Digital-Movie-Creator-1GB-Card/dp/B000LP30LA/ref=sr_1_2?ie=UTF8&s=software&qid=1265928833&sr=1-2

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >