power supply unit - Page 155

Databound Checkbox list with textboxes in a webform

- by zSysop

Hi all, I'm having trouble coming up with a solution for the following problem and i was wondering if someone here would help me out. I need to pull a list of supplies from a db table and list them along with two textboxes (one for quantity, and another for manufacturer) so the list would look something like this. checkbox for supply 1 | Quantity | Manufacturer checkbox for supply 2 | Quantity | Manufacturer .. I also need to store all of the checked items in a db table. I'm not sure how i should go about doing this. I've heard some talk about a repeater control being useful but i've not come across any examples that do this type of thing. Thanks in advance

Read the article

I'm working on Peano Axioms in Agda and I've hit a bit of a sticking point

- by Schroedinger

PA6 : ?{m n} -> m = n -> n = m is the axiom I am trying to solve and support, I've tried using a cong (from the core library) but am having troubles with the cong constructor PA6 = cong gets me nowhere, I know for cong I am required to supply a refl for equality and a type, but I'm, not sure what type I'm supposed to supply. Ideas? This is for a small assignment at University, so I'd rather someone demonstrate what I've missed rather than write the acutual answer, but I'd appreciate any degree of support.

Read the article

Using core plot for iPhone, drawing date on x axis

- by xmax

I have available an array of dictionary that contains NSDate and NSNumber values. I wanted to plot date on X axis. for plotting I need to supply xRanges to plot with some decimal values.I don't understand how can i supply NSdate values to xRange (low and length). And what should be there in this method: -(NSNumber *)numberForPlot:(CPPlot *)plot field:(NSUInteger)fieldEnum recordIndex:(NSUInteger)index I mean how my date value will be returned as NSNumber..? I think i should use some interval over there.but what should be the exact conversion..? can any one explain me what are the exact requirement to plot the date on xAxis..? I am plotting my plot in half of the view.

Read the article

Consuming web service from BizTalk with authentication credentials

- by lox

I am trying to consume a web service from BizTalk by supplying credentials in the SOAP adapter port. I type in the Web Service URL and then I have the choice of Anonymous, Basic, Digest and NTLM authentication types. How do I supply my username, password and domain?.. when testing with soapUI it works perfectly. The only way I get to supply credentials is Basic or Digest but no matter what I fill in I get a "not authroized" error. The strange thing is that it actually works when I choose the NTLM authentication type but how does it get acces when I have not supplied the credentials. And there is no way that my server has direct access to the service?

Read the article

Combining SpecFlow table and Moq mocked object

- by Confused

I have a situation where I want to use a mocked object (using Moq) so I can create setup and expectations, but also want to supply some of the property values using the SpecFlow Table. Is there a convenient way to create a mock and supply the table for the seed values? // Specflow feature Scenario Outline: MyOutline Given I have a MyObject object as | Field | Value | | Title | The Title | | Id | The Id | // Specflow step code Mock<MyObject> _myMock; [Given(@"I have a MyObject object as")] public void GivenIHaveAMyObjectObjectAs(Table table) { var obj = table.CreateInstance<MyObject>(); _myMock = new Mock<MyObject>(); // How do I easily combine the two? }

Read the article

Typical text encoding and EOL behavior on mobile devices

- by Dan W

Typical things to worry about when dealing with text are the BOM/signature, encoding, and the end of line (EOL) char/chars. I know that Windows often favours \r\n (CR+LF) and Mac/Linux favours \n (LF), but how about popular mobile devices such as the iPhone and Android? Do typical apps on those platforms favour one or the other (or maybe even \r for iOS)? I'll supply both types to the user just in case, but I'd like to choose one as default. Also, which text encodings are mobiles most likely to use - UTF-8, iso-8859-1, Windows 1252 (or other default codepage) or maybe even UTF-16? And if they use UTF-8/16, are they likely to need (or require not having) a BOM/signature? What is the typical behavior here? Once again, I'll supply a range of encodings to the user just in case, but I'd like to prioritize or use certain encodings as default if it's appropriate.

Read the article

PHP Apostrophe and query string.

- by cmaduro

I want to supply a SQL statement from the query string, but all my efforts result in escaped single quotes and slashes.

Read the article

How to write an Android SocketServer to listen on wifi

- by xioxox

I've written a thread using java.net.SocketServer to listen on a particular port. It works fine in the android simulator (using port forwarding). I'm planning to connect over wifi to this port when the app is being used. However, the SocketServer documentation says that if you don't supply an InetAddress, the server listens on localhost. Am I correct that if I do not supply the address, I will not be able to get a connection over wifi? How can I get the InetAddress of the wifi connection to pass to the SocketServer?

Read the article

routing paramenter returns null when only supplying first paramenter in MVC

- by Ray ForRespect

My issue is that I customer Map Route in MVC which takes three parameters. When I supply all three or just two, the parameters are passed from the URL to my controller. However, when I only supply the first parameter, it is not passed and returns null. Not sure what causes this behavior. Route: routes.MapRoute( name: "Details", // Route name url: "{controller}/{action}/{param1}/{param2}/{param3}", // URL with parameters defaults: new { controller = "Details", action = "Index", param1 = UrlParameter.Optional, param2 = UrlParameter.Optional, param3 = UrlParameter.Optional } // Parameter defaults ); Controller: public ActionResult Map(string param1, string param2, string param3) { StoreMap makeMap = new StoreMap(); var storemap = makeMap.makeStoreMap(param1, param2, param3); var model = storemap; return View(model); } string param1 returns null when I navigate to: /StoreMap/Map/PARAM1NAME but it doesn't return null when I navigate to: /StoreMap/Map/PARAM1NAME/PARAM2NAME

Read the article

How can I observe the style on an element during mouse-over?

- by DaveDev

We supply micro-site content to a client. They supply us with a HTML wrapper and we inject our content into it. I'm trying to debug an issue where our style sheet appears to be interfering with the style in their wrapper. Normally I'd use firebug or IE Developer Toolbar to select the element and I can see which styles are being applied, which are being overridden and where they are coming from. But this particular problem only exists when I hover the mouse over a link. Specifically, the link shrinks a little bit. Is there anything that I can use to see what the browser is doing with the styles when I hover the mouse over the link?

Read the article

Is your team is a high-performing team?

As a child I can remember looking out of the car window as my father drove along the Interstate in Florida while seeing prisoners wearing bright orange jump suits and prison guards keeping a watchful eye on them. The prisoners were taking part in a prison road gang. These road gangs were formed to help the state maintain the state highway infrastructure. The prisoner’s primary responsibilities are to pick up trash and debris from the roadway. This is a prime example of a work group or working group used by most prison systems in the United States. Work groups or working groups can be defined as a collection of individuals or entities working together to achieve a specific goal or accomplish a specific set of tasks. Typically these groups are only established for a short period of time and are dissolved once the desired outcome has been achieved. More often than not group members usually feel as though they are expendable to the group and some even dread that they are even in the group. "A team is a small number of people with complementary skills who are committed to a common purpose, performance goals, and approach for which they are mutually accountable." (Katzenbach and Smith, 1993) So how do you determine that a team is a high-performing team? This can be determined by three base line criteria that include: consistently high quality output, the promotion of personal growth and well being of all team members, and most importantly the ability to learn and grow as a unit. Initially, a team can successfully create high-performing output without meeting all three criteria, however this will erode over time because team members will feel detached from the group or that they are not growing then the quality of the output will decline. High performing teams are similar to work groups because they both utilize a collection of individuals or entities to accomplish tasks. What distinguish a high-performing team from a work group are its characteristics. High-performing teams contain five core characteristics. These characteristics are what separate a group from a team. The five characteristics of a high-performing team include: Purpose, Performance Measures, People with Tasks and Relationship Skills, Process, and Preparation and Practice. A high-performing team is much more than a work group, and typically has a life cycle that can vary from team to team. The standard team lifecycle consists of five states and is comparable to a human life cycle. The five states of a high-performing team lifecycle include: Formulating, Storming, Normalizing, Performing, and Adjourning. The Formulating State of a team is first realized when the team members are first defined and roles are assigned to all members. This initial stage is very important because it can set the tone for the team and can ultimately determine its success or failure. In addition, this stage requires the team to have a strong leader because team members are normally unclear about specific roles, specific obstacles and goals that my lay ahead of them. Finally, this stage is where most team members initially meet one another prior to working as a team unless the team members already know each other. The Storming State normally arrives directly after the formulation of a new team because there are still a lot of unknowns amongst the newly formed assembly. As a general rule most of the parties involved in the team are still getting used to the workload, pace of work, deadlines and the validity of various tasks that need to be performed by the group. In this state everything is questioned because there are so many unknowns. Items commonly questioned include the credentials of others on the team, the actual validity of a project, and the leadership abilities of the team leader. This can be exemplified by looking at the interactions between animals when they first meet. If we look at a scenario where two people are walking directly toward each other with their dogs. The dogs will automatically enter the Storming State because they do not know the other dog. Typically in this situation, they attempt to define which is more dominating via play or fighting depending on how the dogs interact with each other. Once dominance has been defined and accepted by both dogs then they will either want to play or leave depending on how the dogs interacted and other environmental variables. Once the Storming State has been realized then the Normalizing State takes over. This state is entered by a team once all the questions of the Storming State have been answered and the team has been tested by a few tasks or projects. Typically, participants in the team are filled with energy, and comradery, and a strong alliance with team goals and objectives. A high school football team is a perfect example of the Normalizing State when they start their season. The player positions have been assigned, the depth chart has been filled and everyone is focused on winning each game. All of the players encourage and expect each other to perform at the best of their abilities and are united by competition from other teams. The Performing State is achieved by a team when its history, working habits, and culture solidify the team as one working unit. In this state team members can anticipate specific behaviors, attitudes, reactions, and challenges are seen as opportunities and not problems. Additionally, each team member knows their role in the team’s success, and the roles of others. This is the most productive state of a group and is where all the time invested working together really pays off. If you look at an Olympic figure skating team skate you can easily see how the time spent working together benefits their performance. They skate as one unit even though it is comprised of two skaters. Each skater has their routine completely memorized as well as their partners. This allows them to anticipate each other’s moves on the ice makes their skating look effortless. The final state of a team is the Adjourning State. This state is where accomplishments by the team and each individual team member are recognized. Additionally, this state also allows for reflection of the interactions between team members, work accomplished and challenges that were faced. Finally, the team celebrates the challenges they have faced and overcome as a unit. Currently in the workplace teams are divided into two different types: Co-located and Distributed Teams. Co-located teams defined as the traditional group of people working together in an office, according to Andy Singleton of Assembla. This traditional type of a team has dominated business in the past due to inadequate technology, which forced workers to primarily interact with one another via face to face meetings. Team meetings are primarily lead by the person with the highest status in the company. Having personally, participated in meetings of this type, usually a select few of the team members dominate the flow of communication which reduces the input of others in group discussions. Since discussions are dominated by a select few individuals the discussions and group discussion are skewed in favor of the individuals who communicate the most in meetings. In addition, Team members might not give their full opinions on a topic of discussion in part not to offend or create controversy amongst the team and can alter decision made in meetings towards those of the opinions of the dominating team members. Distributed teams are by definition spread across an area or subdivided into separate sections. That is exactly what distributed teams when compared to a more traditional team. It is common place for distributed teams to have team members across town, in the next state, across the country and even with the advances in technology over the last 20 year across the world. These teams allow for more diversity compared to the other type of teams because they allow for more flexibility regarding location. A team could consist of a 30 year old male Italian project manager from New York, a 50 year old female Hispanic from California and a collection of programmers from India because technology allows them to communicate as if they were standing next to one another. In addition, distributed team members consult with more team members prior to making decisions compared to traditional teams, and take longer to come to decisions due to the changes in time zones and cultural events. However, team members feel more empowered to speak out when they do not agree with the team and to notify others of potential issues regarding the work that the team is doing. Virtual teams which are a subset of the distributed team type is changing organizational strategies due to the fact that a team can now in essence be working 24 hrs a day because of utilizing employees in various time zones and locations. A primary example of this is with customer services departments, a company can have multiple call centers spread across multiple time zones allowing them to appear to be open 24 hours a day while all a employees work from 9AM to 5 PM every day. Virtual teams also allow human resources departments to go after the best talent for the company regardless of where the potential employee works because they will be a part of a virtual team all that is need is the proper technology to be setup to allow everyone to communicate. In addition to allowing employees to work from home, the company can save space and resources by not having to provide a desk for every team member. In fact, those team members that randomly come into the office can actually share one desk amongst multiple people. This is definitely a cost cutting plus given the current state of the economy. One thing that can turn a team into a high-performing team is leadership. High-performing team leaders need to focus on investing in ongoing personal development, provide team members with direction, structure, and resources needed to accomplish their work, make the right interventions at the right time, and help the team manage boundaries between the team and various external parties involved in the teams work. A team leader needs to invest in ongoing personal development in order to effectively manage their team. People have said that attitude is everything; this is very true about leaders and leadership. A team takes on the attitudes and behaviors of its leaders. This can potentially harm the team and the team’s output. Leaders must concentrate on self-awareness, and understanding their team’s group dynamics to fully understand how to lead them. In addition, always learning new leadership techniques from other effective leaders is also very beneficial. Providing team members with direction, structure, and resources that they need to accomplish their work collectively sounds easy, but it is not. Leaders need to be able to effectively communicate with their team on how their work helps the company reach for its organizational vision. Conversely, the leader needs to allow his team to work autonomously within specific guidelines to turn the company’s vision into a reality. This being said the team must be appropriately staffed according to the size of the team’s tasks and their complexity. These tasks should be clear, and be meaningful to the company’s objectives and allow for feedback to be exchanged with the leader and the team member and the leader and upper management. Now if the team is properly staffed, and has a clear and full understanding of what is to be done; the company also must supply the workers with the proper tools to achieve the tasks that they are asked to do. No one should be asked to dig a hole without being given a shovel. Finally, leaders must reward their team members for accomplishments that they achieve. Awards could range from just a simple congratulatory email, a party to close the completion of a large project, or other monetary rewards. Managing boundaries is very important for team leaders because it can alter attitudes of team members and can add undue stress to the team which will force them to loose focus on the tasks at hand for the group. Team leaders should promote communication between team members so that burdens are shared amongst the team and solutions can be derived from hearing the opinions of multiple sources. This also reinforces team camaraderie and working as a unit. Team leaders must manage the type and timing of interventions as to not create an even bigger mess within the team. Poorly timed interventions can really deflate team members and make them question themselves. This could really increase further and undue interventions by the team leader. Typically, the best time for interventions is when the team is just starting to form so that all unproductive behaviors are removed from the team and that it can retain focus on its agenda. If an intervention is effectively executed the team will feel energized about the work that they are doing, promote communication and interaction amongst the group and improve moral overall. High-performing teams are very import to organizations because they consistently produce high quality output and develop a collective purpose for their work. This drive to succeed allows team members to utilize specific talents allowing for growth in these areas. In addition, these team members usually take on a sense of ownership with their projects and feel that the other team members are irreplaceable. References: http://blog.assembla.com/assemblablog/tabid/12618/bid/3127/Three-ways-to-organize-your-team-co-located-outsourced-or-global.aspx Katzenbach, J.R. & Smith, D.K. (1993). The Wisdom of Teams: Creating the High-performance Organization. Boston: Harvard Business School.

Read the article

ASP.NET MVC 3 Hosting :: How to Deploy Web Apps Using ASP.NET MVC 3, Razor and EF Code First - Part I

- by mbridge

First, you can download the source code from http://efmvc.codeplex.com. The following frameworks will be used for this step by step tutorial. public class Category { public int CategoryId { get; set; } [Required(ErrorMessage = "Name Required")] [StringLength(25, ErrorMessage = "Must be less than 25 characters")] public string Name { get; set;} public string Description { get; set; } public virtual ICollection<Expense> Expenses { get; set; } } Expense Class public class Expense { public int ExpenseId { get; set; } public string Transaction { get; set; } public DateTime Date { get; set; } public double Amount { get; set; } public int CategoryId { get; set; } public virtual Category Category { get; set; } } Define Domain Model Let’s create domain model for our simple web application Category Class We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. In this post, we will be focusing on CRUD operations for the entity Category and will be working on the Expense entity with a View Model object in the later post. And the source code for this application will be refactored over time. The above entities are very simple POCO (Plain Old CLR Object) classes and the entity Category is decorated with validation attributes in the System.ComponentModel.DataAnnotations namespace. Now we want to use these entities for defining model objects for the Entity Framework 4. Using the Code First approach of Entity Framework, we can first define the entities by simply writing POCO classes without any coupling with any API or database library. This approach lets you focus on domain model which will enable Domain-Driven Development for applications. EF code first support is currently enabled with a separate API that is runs on top of the Entity Framework 4. EF Code First is reached CTP 5 when I am writing this article. Creating Context Class for Entity Framework We have created our domain model and let’s create a class in order to working with Entity Framework Code First. For this, you have to download EF Code First CTP 5 and add reference to the assembly EntitFramework.dll. You can also use NuGet to download add reference to EEF Code First. public class MyFinanceContext : DbContext { public MyFinanceContext() : base("MyFinance") { } public DbSet<Category> Categories { get; set; } public DbSet<Expense> Expenses { get; set; } } The above class MyFinanceContext is derived from DbContext that can connect your model classes to a database. The MyFinanceContext class is mapping our Category and Expense class into database tables Categories and Expenses using DbSet<TEntity> where TEntity is any POCO class. When we are running the application at first time, it will automatically create the database. EF code-first look for a connection string in web.config or app.config that has the same name as the dbcontext class. If it is not find any connection string with the convention, it will automatically create database in local SQL Express database by default and the name of the database will be same name as the dbcontext class. You can also define the name of database in constructor of the the dbcontext class. Unlike NHibernate, we don’t have to use any XML based mapping files or Fluent interface for mapping between our model and database. The model classes of Code First are working on the basis of conventions and we can also use a fluent API to refine our model. The convention for primary key is ‘Id’ or ‘<class name>Id’. If primary key properties are detected with type ‘int’, ‘long’ or ‘short’, they will automatically registered as identity columns in the database by default. Primary key detection is not case sensitive. We can define our model classes with validation attributes in the System.ComponentModel.DataAnnotations namespace and it automatically enforces validation rules when a model object is updated or saved. Generic Repository for EF Code First We have created model classes and dbcontext class. Now we have to create generic repository pattern for data persistence with EF code first. If you don’t know about the repository pattern, checkout Martin Fowler’s article on Repository Let’s create a generic repository to working with DbContext and DbSet generics. public interface IRepository<T> where T : class { void Add(T entity); void Delete(T entity); T GetById(long Id); IEnumerable<T> All(); } RepositoryBasse – Generic Repository class protected MyFinanceContext Database { get { return database ?? (database = DatabaseFactory.Get()); } } public virtual void Add(T entity) { dbset.Add(entity); } public virtual void Delete(T entity) { dbset.Remove(entity); } public virtual T GetById(long id) { return dbset.Find(id); } public virtual IEnumerable<T> All() { return dbset.ToList(); } } DatabaseFactory class public class DatabaseFactory : Disposable, IDatabaseFactory { private MyFinanceContext database; public MyFinanceContext Get() { return database ?? (database = new MyFinanceContext()); } protected override void DisposeCore() { if (database != null) database.Dispose(); } } Unit of Work If you are new to Unit of Work pattern, checkout Fowler’s article on Unit of Work . According to Martin Fowler, the Unit of Work pattern "maintains a list of objects affected by a business transaction and coordinates the writing out of changes and the resolution of concurrency problems." Let’s create a class for handling Unit of Work public interface IUnitOfWork { void Commit(); } UniOfWork class public class UnitOfWork : IUnitOfWork { private readonly IDatabaseFactory databaseFactory; private MyFinanceContext dataContext; public UnitOfWork(IDatabaseFactory databaseFactory) { this.databaseFactory = databaseFactory; } protected MyFinanceContext DataContext { get { return dataContext ?? (dataContext = databaseFactory.Get()); } } public void Commit() { DataContext.Commit(); } } The Commit method of the UnitOfWork will call the commit method of MyFinanceContext class and it will execute the SaveChanges method of DbContext class. Repository class for Category In this post, we will be focusing on the persistence against Category entity and will working on other entities in later post. Let’s create a repository for handling CRUD operations for Category using derive from a generic Repository RepositoryBase<T>. public class CategoryRepository: RepositoryBase<Category>, ICategoryRepository { public CategoryRepository(IDatabaseFactory databaseFactory) : base(databaseFactory) { } } public interface ICategoryRepository : IRepository<Category> { } If we need additional methods than generic repository for the Category, we can define in the CategoryRepository. Dependency Injection using Unity 2.0 If you are new to Inversion of Control/ Dependency Injection or Unity, please have a look on my articles at http://weblogs.asp.net/shijuvarghese/archive/tags/IoC/default.aspx. I want to create a custom lifetime manager for Unity to store container in the current HttpContext. public class HttpContextLifetimeManager<T> : LifetimeManager, IDisposable { public override object GetValue() { return HttpContext.Current.Items[typeof(T).AssemblyQualifiedName]; } public override void RemoveValue() { HttpContext.Current.Items.Remove(typeof(T).AssemblyQualifiedName); } public override void SetValue(object newValue) { HttpContext.Current.Items[typeof(T).AssemblyQualifiedName] = newValue; } public void Dispose() { RemoveValue(); } } Let’s create controller factory for Unity in the ASP.NET MVC 3 application. 404, String.Format( "The controller for path '{0}' could not be found" + "or it does not implement IController.", reqContext.HttpContext.Request.Path)); if (!typeof(IController).IsAssignableFrom(controllerType)) throw new ArgumentException( string.Format( "Type requested is not a controller: {0}", controllerType.Name), "controllerType"); try { controller= container.Resolve(controllerType) as IController; } catch (Exception ex) { throw new InvalidOperationException(String.Format( "Error resolving controller {0}", controllerType.Name), ex); } return controller; } } Configure contract and concrete types in Unity Let’s configure our contract and concrete types in Unity for resolving our dependencies. private void ConfigureUnity() { //Create UnityContainer IUnityContainer container = new UnityContainer() .RegisterType<IDatabaseFactory, DatabaseFactory>(new HttpContextLifetimeManager<IDatabaseFactory>()) .RegisterType<IUnitOfWork, UnitOfWork>(new HttpContextLifetimeManager<IUnitOfWork>()) .RegisterType<ICategoryRepository, CategoryRepository>(new HttpContextLifetimeManager<ICategoryRepository>()); //Set container for Controller Factory ControllerBuilder.Current.SetControllerFactory( new UnityControllerFactory(container)); } In the above ConfigureUnity method, we are registering our types onto Unity container with custom lifetime manager HttpContextLifetimeManager. Let’s call ConfigureUnity method in the Global.asax.cs for set controller factory for Unity and configuring the types with Unity. protected void Application_Start() { AreaRegistration.RegisterAllAreas(); RegisterGlobalFilters(GlobalFilters.Filters); RegisterRoutes(RouteTable.Routes); ConfigureUnity(); } Developing web application using ASP.NET MVC 3 We have created our domain model for our web application and also have created repositories and configured dependencies with Unity container. Now we have to create controller classes and views for doing CRUD operations against the Category entity. Let’s create controller class for Category Category Controller public class CategoryController : Controller { private readonly ICategoryRepository categoryRepository; private readonly IUnitOfWork unitOfWork; public CategoryController(ICategoryRepository categoryRepository, IUnitOfWork unitOfWork) { this.categoryRepository = categoryRepository; this.unitOfWork = unitOfWork; } public ActionResult Index() { var categories = categoryRepository.All(); return View(categories); } [HttpGet] public ActionResult Edit(int id) { var category = categoryRepository.GetById(id); return View(category); } [HttpPost] public ActionResult Edit(int id, FormCollection collection) { var category = categoryRepository.GetById(id); if (TryUpdateModel(category)) { unitOfWork.Commit(); return RedirectToAction("Index"); } else return View(category); } [HttpGet] public ActionResult Create() { var category = new Category(); return View(category); } [HttpPost] public ActionResult Create(Category category) { if (!ModelState.IsValid) { return View("Create", category); } categoryRepository.Add(category); unitOfWork.Commit(); return RedirectToAction("Index"); } [HttpPost] public ActionResult Delete(int id) { var category = categoryRepository.GetById(id); categoryRepository.Delete(category); unitOfWork.Commit(); var categories = categoryRepository.All(); return PartialView("CategoryList", categories); } } Creating Views in Razor Now we are going to create views in Razor for our ASP.NET MVC 3 application. Let’s create a partial view CategoryList.cshtml for listing category information and providing link for Edit and Delete operations. CategoryList.cshtml @using MyFinance.Helpers; @using MyFinance.Domain; @model IEnumerable<Category> <table> <tr> <th>Actions</th> <th>Name</th> <th>Description</th> </tr> @foreach (var item in Model) { <tr> <td> @Html.ActionLink("Edit", "Edit",new { id = item.CategoryId }) @Ajax.ActionLink("Delete", "Delete", new { id = item.CategoryId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divCategoryList" }) </td> <td> @item.Name </td> <td> @item.Description </td> </tr> } </table> <p> @Html.ActionLink("Create New", "Create") </p> The delete link is providing Ajax functionality using the Ajax.ActionLink. This will call an Ajax request for Delete action method in the CategoryCotroller class. In the Delete action method, it will return Partial View CategoryList after deleting the record. We are using CategoryList view for the Ajax functionality and also for Index view using for displaying list of category information. Let’s create Index view using partial view CategoryList Index.chtml @model IEnumerable<MyFinance.Domain.Category> @{ ViewBag.Title = "Index"; } <h2>Category List</h2> <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script> <div id="divCategoryList"> @Html.Partial("CategoryList", Model) </div> We can call the partial views using Html.Partial helper method. Now we are going to create View pages for insert and update functionality for the Category. Both view pages are sharing common user interface for entering the category information. So I want to create an EditorTemplate for the Category information. We have to create the EditorTemplate with the same name of entity object so that we can refer it on view pages using @Html.EditorFor(model => model) . So let’s create template with name Category. Category.cshtml @model MyFinance.Domain.Category <div class="editor-label"> @Html.LabelFor(model => model.Name) </div> <div class="editor-field"> @Html.EditorFor(model => model.Name) @Html.ValidationMessageFor(model => model.Name) </div> <div class="editor-label"> @Html.LabelFor(model => model.Description) </div> <div class="editor-field"> @Html.EditorFor(model => model.Description) @Html.ValidationMessageFor(model => model.Description) </div> Let’s create view page for insert Category information @model MyFinance.Domain.Category @{ ViewBag.Title = "Save"; } <h2>Create</h2> <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script> @using (Html.BeginForm()) { @Html.ValidationSummary(true) <fieldset> <legend>Category</legend> @Html.EditorFor(model => model) <p> <input type="submit" value="Create" /> </p> </fieldset> } <div> @Html.ActionLink("Back to List", "Index") </div> ViewStart file In Razor views, we can add a file named _viewstart.cshtml in the views directory and this will be shared among the all views with in the Views directory. The below code in the _viewstart.cshtml, sets the Layout page for every Views in the Views folder. @{ Layout = "~/Views/Shared/_Layout.cshtml"; } Tomorrow, we will cotinue the second part of this article. :)

Read the article

Include weather information in ASP.Net site from weather.com services

- by sreejukg

In this article, I am going to demonstrate how you can use the XMLOAP services (referred as XOAP from here onwards) provided by weather.com to display the weather information in your website. The XOAP services are available to be used for free of charge, provided you are comply with requirements from weather.com. I am writing this article from a technical point of view. If you are planning to use weather.com XOAP services in your application, please refer to the terms and conditions from weather.com website. In order to start using the XOAP services, you need to sign up the XOAP datafeed. The signing process is simple, you simply browse the url http://www.weather.com/services/xmloap.html. The URL looks similar to the following. Click on the sign up button, you will reach the registration page. Here you need to specify the site name you need to use this feed for. The form looks similar to the following. Once you fill all the mandatory information, click on save and continue button. That’s it. The registration is over. You will receive an email that contains your partner id, license key and SDK. The SDK available in a zipped format, contains the terms of use and documentation about the services available. Other than this the SDK includes the logos and icons required to display the weather information. As per the SDK, currently there are 2 types of information available through XOAP. These services are Current Conditions for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Hourly Five-Day Forecast (today + 4 additional forecast days in consecutive order beginning with tomorrow) for over 30,000 U.S. and over 7,900 international Location IDs Updated at least Three Times Daily The SDK provides detailed information about the fields included in response of each service. Additionally there is a refresh rate that you need to comply with. As per the SDK, the refresh rate means the following “Refresh Rate” shall mean the maximum frequency with which you may call the XML Feed for a given LocID requesting a data set for that LocID. During the time period in between refresh periods the data must be cached by you either in the memory on your servers or in Your Desktop Application. About the Services Weather.com will provide you with access to the XML Feed over the Internet through the hostname xoap.weather.com. The weather data from the XML feed must be requested for a specific location. So you need a location ID (LOC ID). The XML feed work with 2 types of location IDs. First one is with City Identifiers and second one is using 5 Digit US postal codes. If you do not know your location ID, don’t worry, there is a location id search service available for you to retrieve the location id from city name. Since I am a resident in the Kingdom of Bahrain, I am going to retrieve the weather information for Manama(the capital of Bahrain) . In order to get the location ID for Manama, type the following URL in your address bar. http://xoap.weather.com/search/search?where=manama I got the following XML output. <?xml version="1.0" encoding="UTF-8"?> <!-- This document is intended only for use by authorized licensees of The –> <!-- Weather Channel. Unauthorized use is prohibited. Copyright 1995-2011, –> <!-- The Weather Channel Interactive, Inc. All Rights Reserved. –> <search ver="3.0"> <loc id="BAXX0001" type="1">Al Manama, Bahrain</loc> </search> You can try this with any city name, if the city is available, it will return the location id, and otherwise, it will return nothing. In order to get the weather information, from XOAP, you need to pass certain parameters to the XOAP service. A brief about the parameters are as follows. Please refer SDK for more details. Parameter name Possible Value cc Optional, if you include this, the current condition will be returned. Value can be anything, as it will be ignored e.g. cc=* dayf If you want the forecast for 5 days, specify dayf=5 This is optional iink Value should be XOAP par Your partner id. You can find this in your registration email from weather.com prod Value should be XOAP key The license key assigned to you. This will be available in the registration email unit s or m (standard or matric or you can think of Celsius/Fahrenheit) this is optional field, if not specified the unit will be standard(s) The URL host for the XOAP service is http://xoap.weather.com. So for my purpose, I need the following request to be made to access the XOAP services. http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=*********&key=************** (The ***** to be replaced with the corresponding alternatives) The response XML have a root element “weather”. Under the root element, it has the following sections <head> - the meta data information about the weather results returned. <loc> - the location data block that provides, the information about the location for which the wheather data is retrieved. <lnks> - the 4 promotional links you need to place along with the weather display. Additional to these 4 links, there should be another link with weather channel logo to the home page of weather.com. <cc> - the current condition data. This element will be there only if you specify the cc element in the request. <dayf> - the forcast data as you specified. This element will be there only if you specify the dayf in the request. In this walkthrough, I am going to capture the weather information for Manama (Location ID: BAXX0001). You need 2 applications to display weather information in your website. A Console application that retrieves data from the XMLOAP and store in the SQL Server database (or any data store as you prefer).This application will be scheduled to execute in every 25 minutes using windows task scheduler, so that we can comply with the refresh rate. A web application that display data from the SQL Server database Retrieve the Weather from XOAP I have created a console application named, Weather Service. I created a SQL server database, with the following columns. I named the table as tblweather. You are free to choose any name. Column name Description lastUpdated Datetime, this is the last time when the weather data is updated. This is the time of the service running TemparatureDateTime The date and time returned by XML feed Temparature The temperature returned by the XML feed. TemparatureUnit The unit of the temperature returned by the XML feed iconId The id of the icon to be used. Currently 48 icons from 0 to 47 are available. WeatherDescription The Weather Description Phrase returned by the feed. Link1url The url to the first promo link Link1Text The text for the first promo link Link2url The url to the second promo link Link2Text The text for the second promo link Link3url The url to the third promo link Link3Text The text for the third promo link Link4url The url to the fourth promo link Link4Text The text for the fourth promo link Every time when the service runs, the application will update the database columns from the XOAP data feed. When the application starts, It is going to get the data as XML from the url. This demonstration uses LINQ to extract the necessary data from the fetched XML. The following are the code segment for extracting data from the weather XML using LINQ. // first, create an instance of the XDocument class with the XOAP URL. replace **** with the corresponding values. XDocument weather = XDocument.Load("http://xoap.weather.com/weather/local/BAXX0001?cc=*&link=xoap&prod=xoap&par=***********&key=c*********"); // construct a query using LINQ var feedResult = from item in weather.Descendants() select new { unit = item.Element("head").Element("ut").Value, temp = item.Element("cc").Element("tmp").Value, tempDate = item.Element("cc").Element("lsup").Value, iconId = item.Element("cc").Element("icon").Value, description = item.Element("cc").Element("t").Value, links = from link in item.Elements("lnks").Elements("link") select new { url = link.Element("l").Value, text = link.Element("t").Value } }; // Load the root node to a variable, you may use foreach construct instead. var item1 = feedResult.First(); *If you want to learn more about LINQ and XML, read this nice blog from Scott GU. http://weblogs.asp.net/scottgu/archive/2007/08/07/using-linq-to-xml-and-how-to-build-a-custom-rss-feed-reader-with-it.aspx Now you have all the required values in item1. For e.g. if you want to get the temperature, use item1.temp; Now I just need to execute an SQL query against the database. See the connection part. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { string strSql = @"update tblweather set lastupdated=getdate(), temparatureDateTime = @temparatureDateTime, temparature=@temparature, temparatureUnit=@temparatureUnit, iconId = @iconId, description=@description, link1url=@link1url, link1text=@link1text, link2url=@link2url, link2text=@link2text,link3url=@link3url, link3text=@link3text,link4url=@link4url, link4text=@link4text"; SqlCommand comm = new SqlCommand(strSql, conn); comm.Parameters.AddWithValue("temparatureDateTime", item1.tempDate); comm.Parameters.AddWithValue("temparature", item1.temp); comm.Parameters.AddWithValue("temparatureUnit", item1.unit); comm.Parameters.AddWithValue("description", item1.description); comm.Parameters.AddWithValue("iconId", item1.iconId); var lstLinks = item1.links; comm.Parameters.AddWithValue("link1url", lstLinks.ElementAt(0).url); comm.Parameters.AddWithValue("link1text", lstLinks.ElementAt(0).text); comm.Parameters.AddWithValue("link2url", lstLinks.ElementAt(1).url); comm.Parameters.AddWithValue("link2text", lstLinks.ElementAt(1).text); comm.Parameters.AddWithValue("link3url", lstLinks.ElementAt(2).url); comm.Parameters.AddWithValue("link3text", lstLinks.ElementAt(2).text); comm.Parameters.AddWithValue("link4url", lstLinks.ElementAt(3).url); comm.Parameters.AddWithValue("link4text", lstLinks.ElementAt(3).text); conn.Open(); comm.ExecuteNonQuery(); conn.Close(); Console.WriteLine("database updated"); } Now click ctrl + f5 to run the service. I got the following output Check your database and make sure, the data is updated with the latest information from the service. (Make sure you inserted one row in the database by entering some values before executing the service. Otherwise you need to modify your application code to count the rows and conditionally perform insert/update query) Display the Weather information in ASP.Net page Now you got all the data in the database. You just need to create a web application and display the data from the database. I created a new ASP.Net web application with a default.aspx page. In order to comply with the terms of weather.com, You need to use Weather.com logo along with the weather display. You can find the necessary logos to use under the folder “logos” in the SDK. Additionally copy any of the icon set from the folder “icons” to your web application. I used the 93x93 icon set. You are free to use any other sizes available. The design view of the page in VS2010 looks similar to the following. The page contains a heading, an image control (for displaying the weather icon), 2 label controls (for displaying temperature and weather description), 4 hyperlinks (for displaying the 4 promo links returned by the XOAP service) and weather.com logo with hyperlink to the weather.com home page. I am going to write code that will update the values of these controls from the values stored in the database by the service application as mentioned in the previous step. Go to the code behind file for the webpage, enter the following code under Page_Load event handler. using (SqlConnection conn = new SqlConnection(@"Data Source=sreeju\sqlexpress;Initial Catalog=Sample;Integrated Security=True")) { SqlCommand comm = new SqlCommand("select top 1 * from tblweather", conn); conn.Open(); SqlDataReader reader = comm.ExecuteReader(); if (reader.Read()) { lblTemparature.Text = reader["temparature"].ToString() + "°" + reader["temparatureUnit"].ToString(); lblWeatherDescription.Text = reader["description"].ToString(); imgWeather.ImageUrl = "icons/" + reader["iconId"].ToString() + ".png"; lnk1.Text = reader["link1text"].ToString(); lnk1.NavigateUrl = reader["link1url"].ToString(); lnk2.Text = reader["link2text"].ToString(); lnk2.NavigateUrl = reader["link2url"].ToString(); lnk3.Text = reader["link3text"].ToString(); lnk3.NavigateUrl = reader["link3url"].ToString(); lnk4.Text = reader["link4text"].ToString(); lnk4.NavigateUrl = reader["link4url"].ToString(); } conn.Close(); } Press ctrl + f5 to run the page. You will see the following output. That’s it. You need to configure the console application to run every 25 minutes so that the database is updated. Also you can fetch the forecast information and store those in the database, and then retrieve it later in your web page. Since the data resides in your database, you have the full control over your display. You need to make sure your website comply with weather.com license requirements. If you want to get the source code of this walkthrough through the application, post your email address below. Hope you enjoy the reading.

Read the article

CodePlex Daily Summary for Monday, June 17, 2013

CodePlex Daily Summary for Monday, June 17, 2013Popular ReleasesKooboo CMS: Kooboo CMS 4.1.1: The stable release of Kooboo CMS 4.1.0 with fixed the following issues: https://github.com/Kooboo/CMS/issues/1 https://github.com/Kooboo/CMS/issues/11 https://github.com/Kooboo/CMS/issues/13 https://github.com/Kooboo/CMS/issues/15 https://github.com/Kooboo/CMS/issues/19 https://github.com/Kooboo/CMS/issues/20 https://github.com/Kooboo/CMS/issues/24 https://github.com/Kooboo/CMS/issues/43 https://github.com/Kooboo/CMS/issues/45 https://github.com/Kooboo/CMS/issues/46 https://github....VidCoder: 1.5.0 Beta: The betas have started up again! If you were previously on the beta track you will need to install this to get back on it. That's because you can now run both the Beta and Stable version of VidCoder side-by-side! Note that the OpenCL and Intel QuickSync changes being tested by HandBrake are not in the betas yet. They will appear when HandBrake integrates them into the main branch. Updated HandBrake core to SVN 5590. This adds a new FDK AAC encoder. The FAAC encoder has been removed and now...Wsus Package Publisher: Release v1.2.1306.16: Date/Time are displayed as Local Time. (Last Contact, Last Report and DeadLine) Wpp now remember the last used path for update publishing. (See 'Settings' Form for options) Add an option to allow users to publish an update even if the Framework has judged the certificate as invalid. (Attention : Using this option will NOT allow you to publish or revise an update if your certificate is really invalid). When publishing a new update, filter update files to ensure that there is not files wi...Employee Info Starter Kit: v6.0 - ASP.NET MVC Edition: Release Home - Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture EISK v6.0 – ASP.NET MVC edition bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End SpecificationsCreating a new employee record Read existing employee records Update an existing employee reco...OLAP PivotTable Extensions: Release 0.8.1: Use the 32-bit download for... Excel 2007 Excel 2010 32-bit (even Excel 2010 32-bit on a 64-bit operating system) Excel 2013 32-bit (even Excel 2013 32-bit on a 64-bit operating system) Use the 64-bit download for... Excel 2010 64-bit Excel 2013 64-bit Just download and run the EXE. There is no need to uninstall the previous release. If you have problems getting the add-in to work, see the Troubleshooting Installation wiki page. The new features in this release are: View #VALUE! Err...DirectXTex texture processing library: June 2013: June 15, 2013 Custom filtering implementation for Resize & GenerateMipMaps(3D) - Point, Box, Linear, Cubic, and Triangle TEX_FILTER_TRIANGLE finite low-pass triangle filter TEX_FILTER_WRAP, TEX_FILTER_MIRROR texture semantics for custom filtering TEX_FILTER_BOX alias for TEX_FILTER_FANT WIC Ordered and error diffusion dithering for non-WIC conversion sRGB gamma correct custom filtering and conversion DDS_FLAGS_EXPAND_LUMINANCE - Reader conversion option for L8, L16, and A8L8 legacy ...WPF Application Framework (WAF): WPF Application Framework (WAF) 3.0.0.440: Version: 3.0.0.440 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Please build the whole solution before you start one of the sample applications. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 2012) Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Samples: Use ValueConverters via StaticResource instead of x:Static. Other Downloads Downloads OverviewWatchersNET.TagCloud: WatchersNET.TagCloud 02.02.03: changes Common Words are limited to the current PortalSFDL.NET: SFDL.NET v1.1.0.5: Changelog: Implemeted SFDL Container v4 (AES Encryption, Set Character Set) Added Stopwatch (download time) Many Bugfixes and ImprovementsBlackJumboDog: Ver5.9.1: 2013.06.13 Ver5.9.1 (1) Web??????SSI?#include???、CGI?????????????????????? (2) ???????????????????????????Lakana - WPF Framework: Lakana V2.1 RTM: - Dynamic text localization - A new application wide message busFree language translator and file converter: Free Language Translator 3.3: some bug fixes and a new link to video tutorials on Youtube.Pokemon Battle Online: ETV: ETV???2012?12??????，????，???????$/PBO/branches/PrivateBeta??。 ???????bug???????。 ???? Server??????，?????。 ?????????，?????????????，?????????。 ????????，????，?????????，???????????（??）??。 ???? ????????????。 ???????。 ???PP????，????????????????????PP????，??3。 ?????????????，??????????。 ???????? ??? ?? ???? ??? ???? ?? ?????????? ?? ??? ??? ??? ???????? ???? ???? ???????????????、???????????，??“???????”??。 ???bug ???Modern UI for WPF: Modern UI 1.0.4: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. Related downloads NuGet ModernUI for WPF is also available as NuGet package in the NuGet gallery, id: ModernUI.WPF Download Modern UI for WPF Templates A Visual Studio 2012 extension containing a collection of project and item templates for Modern UI for WPF. The extension includes the ModernUI.WPF NuGet package. DownloadToolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.11): XrmToolbox improvement Add exception handling when loading plugins Updated information panel for displaying two lines of text Tools improvementMetadata Document Generator (v1.2013.6.10)New tool Web Resources Manager (v1.2013.6.11)Retrieve list of unused web resources Retrieve web resources from a solution All tools listAccess Checker (v1.2013.2.5) Attribute Bulk Updater (v1.2013.1.17) FetchXml Tester (v1.2013.3.4) Iconator (v1.2013.1.17) Metadata Document Generator (v1.2013.6.10) Privilege...Document.Editor: 2013.23: What's new for Document.Editor 2013.23: New Insert Emoticon support Improved Format support Minor Bug Fix's, improvements and speed upsChristoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.4 for VS2012: V2.4 - Release Date 6/10/2013 Items addressed in this 2.4 release Updated MSBuild Community Tasks reference to 1.4.0.61 Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesLayered Architecture Sample for .NET: Leave Sample - June 2013 (for .NET 4.5): Thank You for downloading Layered Architecture Sample. Please read the accompanying README.txt file for setup and installation instructions. This is the first set of a series of revised samples that will be released to illustrate the layered architecture design pattern. This version is only supported on Visual Studio 2012. This set contains 2 samples that illustrates the use of: ASP.NET Web Forms, ASP.NET Model Binding, Windows Communications Foundation (WCF), Windows Workflow Foundation (W...Papercut: Papercut 2013-6-10: Feature: Shows From, To, Date and Subject of Email. Feature: Async UI and loading spinner. Enhancement: Improved speed when loading large attachments. Enhancement: Decoupled SMTP server into secondary assembly. Enhancement: Upgraded to .NET v4. Fix: Messages lost when received very fast. Fix: Email encoding issues on display/Automatically detect message Encoding Installation Note:Installation is copy and paste. Incoming messages are written to the start-up directory of Papercut. If you do n...Supporting Guidance and Whitepapers: v1.BETA Unit test Generator Documentation: Welcome to the Unit Test Generator Once you’ve moved to Visual Studio 2012, what’s a dev to do without the Create Unit Tests feature? Based on the high demand on User Voice for this feature to be restored, the Visual Studio ALM Rangers have introduced the Unit Test Generator Visual Studio Extension. The extension adds the “create unit test” feature back, with a focus on automating project creation, adding references and generating stubs, extensibility, and targeting of multiple test framewor...New ProjectsAccord.NET Framework: Scientific computing, machine learning and computer vision framework.AllegroSharp: Biblioteka zapewniajaca obsluge serwisu aukcyjnego Allegro.pl w oparciu o udostepniona publicznie usluge Allegro Web API.Blindmap: A simple handy distraction-free mind-mapping tool for desktop/laptop Windows XP/7/8 PCs.Cryptosolic - The Cryptography & Software Licensing Framework for .Net: Cryptosolic is an Open Source Cryptography & Software Licensing Framework for .Net. More Information and Downloads available soon.DSM Web API: The "DSM Web API" project provides portable libraries to call the APIs exposed by a Synology's NAS running the DSM system.everynetsvn: this is a summary description.Extension Library: Provides a library of extension methods for commonly used .NET objects.Finance: this is a new projectFlight: A simple flight simulator with basic physics. Written in Java using the Processing library.gerencia2: This project is about a test of codeplex use whit a smal group of people, actually just two.GMFrameworkForBlog: MVC,EF,Framework,GMFHad: Had jean0617changbranch: jean0617changbranchLCC Handler V1.0: Complete software pack to handle Local Cheque Collection activities in Branches in India and abroad. This small software can handle folowing activities;Mdelete API: Delete all files and directores in windows shell. Support long path (less then 32000 chars) and network path (eg. \\server\share or \\127.0.0.1\share)Model View ViewModel with Controller: Build applications based on the Model-View-ViewModel philosophy! MySQL Connect 2 ASP.NET: Example project to show how to connect MySQL database to ASP.NET web project. IDE: Visual Studio 2010 Pro Programming language: C# Detailed information in the article here: http://epavlov.net/blog/2011/11/13/connect-to-mysql-in-visual-studio/ NEaTly Documented Code: NEaTly Documented Code helps documenting source code by taking comments directly from sources and by formatting them in a easy-to-read way. This is perfect for programming blog, for example. This project is inspired by (but not based on) Beautifully Documented Codenewsalert: this is a news alert project description.On-Screen Keyboard: An OnScreen Keyboad that accept both inputs of keyboard and mousePHP DocBlock Generator: Creates missing docblocks.Puzzle: Puzzle game. Add your image and hace fun! ;)QuickUIT: QuickUIT, short for 'Quick User Interface Testing', is an API for testing applications based on the Microsoft UI Automation framework. QuickUIT provides a simple, object-oriented interface for finding and interacting with automation elements. It is developed in C#. RapidXNA: A simple framework that aims to make starting up new XNA projects for Windows, Xbox 360 and Windows Phone 7 easier. Using RapidXNA you should be able to easily port between the 3 platforms with only minor code changes to your projects.Send HTML Wizard: Wizard to send a local html page, including referenced files, as emailSetup for Converting OLM to PST with Outlook OLM File Exporter: You can convert files from OLM to PST to access Mac Outlook on Windows Outlook using the Outlook Mac Exporter. Tool can be availed in FREE Download.Signalbox: Train dispatching simulation.Store Front: Welcome to store front this is going to built for the community by the community im sick of not having a word press style system in asp.net form for developers TLS: TLSTorrent & Podcast plugins: My Podcasts and My Torrents plugins for MediaPortalTorrentSimulation: This is a student project as academic activities.UnitXMLEditor: UnitXMLEditoruVersionClientCache: uVersionClientCache is a custom macro to always automatically version (URL querstring parameter) your files based on a MD5 hash of the file contents or file last modified date to prevent issues with client browsers caching an old file after you have changed it.Video Katalog: Upravljanje arhivom video materijalaVpNet binding for SignalR: VPNET for SignalR is a binding to Microsoft SignalR JQuery web socket implementation.Warlab: ???????????? ?????? ?? ??????WPF Diagram Designer Resourse: WPF Diagram Designer Resourse

Read the article

Our embedded linux system won't recognize a USB Device if it is plugged in before powerup. Suggestions?

- by Blaine

We are developing on a small embedded device. This device us a gumstix overo board running OpenEmbedded linux. We have our development almost completely done, and have run into the strangest of bugs that we can't figure out. We have a USB Device (Spectrophotometer) that has a USB2.0 Connection and an external power supply for the light source. Typical behavior is that you plug in the power supply, then the USB connection to a host. When the usb connection is detected by the device, the device boots up and enables the light source and fan. The device is then able to be used by the host system. The problem is that if the device is plugged into the Gumstix before we turn on the Gumstix, the USB Device apparently is not probed by the system (and hence does not turn on). Under a normal situation, when the connection is initialized by plugging in the usb cable, the spectro turns itself on and becomes available to the system (this can be seen via "lsusb" typically). Neither of these things are happening. There is no device detected via "lsusb" and no dmesg errors of any kind that we can see. It is as if the device is not plugged in. The device does show up and work fine if we unplug the USB cable and plug it back in once the system is booted up. It turns on and shows up on the usb bus, and we can access it with our driver. On any other desktop or laptop, it does not matter if the host system is on or off when we plug in the spectrometer. This behavior is what I would consider to be "normal" - that the usb system is probed and initialized at boot time, and the usb devices come online. In other words, our system is fully functional as long as we plug in the usb device after the system is booted up. Unfortunately this isn't possible in our final product - everything comes on at once. Additional Info: 1) We have tried a flash drive attached to the system when the system is turned off. Booting up the system brings the flash drive online, as expected 2) There are no messages regarding the spectro or usb device (using dmesg). "lsusb" only lists the USB hubs / controllers. It is literally as if the device is not present and not plugged in. 3) We have tried a brand new image from gumstix and an older image from last year. Both images have this problem. This problem exists on all 3 gumstix devices we use. Does anyone have any suggestions? From what I can tell it isn't really possible to do a complete "reboot" of the usb system that is a complete emulation of "unplugging" and "replugging" a usb device. I feel like what is happening is that there is no initial probe on the usb bus that would trigger the usb handshaking, but this is somehow specific to the spectro. This seems to be a kernel issue or at least an issue in how the kernel is initializing the usb subsystem. I'm not really sure though. I have tried the gumstix mailing list, but there doesn't seem to be anyone who has seen this issue before. Any advice or suggestions on where to start looking would be fantastic. Thank you! Blaine output etc. $ uname -a Linux overo 2.6.33 #1 Tue Apr 27 08:35:38 PDT 2010 armv7l GNU/Linux When the system is up and running and spectro is plugged in (working as intended), this is lsusb: Bus 001 Device 116: ID 2457:1022 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2457 idProduct 0x1022 bcdDevice 0.02 iManufacturer 1 USB4000 1.01.11 iProduct 2 Ocean Optics USB4000 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) dmesg output: usb usb1: usb auto-resume hub 1-0:1.0: hub_resume usb usb2: usb auto-resume ehci-omap ehci-omap.0: resume root hub hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-0:1.0: hub_resume hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci-omap ehci-omap.0: suspend root hub usb usb2: usb resume ehci-omap ehci-omap.0: resume root hub hub 2-0:1.0: hub_resume ehci-omap ehci-omap.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2: status 0501 change 0001 hub 2-0:1.0: state 7 ports 3 chg 0004 evt 0000 hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: new high speed USB device using ehci-omap and address 2 ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: default language 0x0409 usb 2-2: udev 2, busnum 2, minor = 129 usb 2-2: New USB device found, idVendor=2457, idProduct=1022 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Ocean Optics USB4000 usb 2-2: Manufacturer: USB4000 1.01.11 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: uevent usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' dmesg has nothing to say, and lusb simply lists nothing else but the two default usb controllers / hubs if we plug the device in before the system is turned on.

Read the article

Regression testing with Selenium GRID

- by Ben Adderson

A lot of software teams out there are tasked with supporting and maintaining systems that have grown organically over time, and the web team here at Red Gate is no exception. We're about to embark on our first significant refactoring endeavour for some time, and as such its clearly paramount that the code be tested thoroughly for regressions. Unfortunately we currently find ourselves with a codebase that isn't very testable - the three layers (database, business logic and UI) are currently tightly coupled. This leaves us with the unfortunate problem that, in order to confidently refactor the code, we need unit tests. But in order to write unit tests, we need to refactor the code :S To try and ease the initial pain of decoupling these layers, I've been looking into the idea of using UI automation to provide a sort of system-level regression test suite. The idea being that these tests can help us identify regressions whilst we work towards a more testable codebase, at which point the more traditional combination of unit and integration tests can take over. Ending up with a strong battery of UI tests is also a nice bonus :) Following on from my previous posts (here, here and here) I knew I wanted to use Selenium. I also figured that this would be a good excuse to put my xUnit [Browser] attribute to good use. Pretty quickly, I had a raft of tests that looked like the following (this particular example uses Reflector Pro). In a nut shell the test traverses our shopping cart and, for a particular combination of number of users and months of support, checks that the price calculations all come up with the correct values. [BrowserTheory] [Browser(Browsers.Firefox3_6, "http://www.red-gate.com")] public void Purchase1UserLicenceNoSupport(SeleniumProvider seleniumProvider) { //Arrange _browser = seleniumProvider.GetBrowser(); _browser.Open("http://www.red-gate.com/dynamic/shoppingCart/ProductOption.aspx?Product=ReflectorPro"); //Act _browser = ShoppingCartHelpers.TraverseShoppingCart(_browser, 1, 0, ".NET Reflector Pro"); //Assert var priceResult = PriceHelpers.GetNewPurchasePrice(db, "ReflectorPro", 1, 0, Currencies.Euros); Assert.Equal(priceResult.Price, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl01_Price")); Assert.Equal(priceResult.Tax, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Tax")); Assert.Equal(priceResult.Total, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Total")); } These tests are pretty concise, with much of the common code in the TraverseShoppingCart() and GetNewPurchasePrice() methods. The (inevitable) problem arose when it came to execute these tests en masse. Selenium is a very slick tool, but it can't mask the fact that UI automation is very slow. To give you an idea, the set of cases that covers all of our products, for all combinations of users and support, came to 372 tests (for now only considering purchases in dollars). In the world of automated integration tests, that's a very manageable number. For unit tests, it's a trifle. However for UI automation, those 372 tests were taking just over two hours to run. Two hours may not sound like a lot, but those cases only cover one of the three currencies we deal with, and only one of the many different ways our systems can be asked to calculate a price. It was already pretty clear at this point that in order for this approach to be viable, I was going to have to find a way to speed things up. Up to this point I had been using Selenium Remote Control to automate Firefox, as this was the approach I had used previously and it had worked well. Fortunately, the guys at SeleniumHQ also maintain a tool for executing multiple Selenium RC tests in parallel: Selenium Grid. Selenium Grid uses a central 'hub' to handle allocation of Selenium tests to individual RCs. The Remote Controls simply register themselves with the hub when they start, and then wait to be assigned work. The (for me) really clever part is that, as far as the client driver library is concerned, the grid hub looks exactly the same as a vanilla remote control. To create a new browser session against Selenium RC, the following C# code suffices: new DefaultSelenium("localhost", 4444, "*firefox", "http://www.red-gate.com"); This assumes that the RC is running on the local machine, and is listening on port 4444 (the default). Assuming the hub is running on your local machine, then to create a browser session in Selenium Grid, via the hub rather than directly against the control, the code is exactly the same! Behind the scenes, the hub will take this request and hand it off to one of the registered RCs that provides the "*firefox" execution environment. It will then pass all communications back and forth between the test runner and the remote control transparently. This makes running existing RC tests on a Selenium Grid a piece of cake, as the developers intended. For a more detailed description of exactly how Selenium Grid works, see this page. Once I had a test environment capable of running multiple tests in parallel, I needed a test runner capable of doing the same. Unfortunately, this does not currently exist for xUnit (boo!). MbUnit on the other hand, has the concept of concurrent execution baked right into the framework. So after swapping out my assembly references, and fixing up the resulting mismatches in assertions, my example test now looks like this: [Test] public void Purchase1UserLicenceNoSupport() { //Arrange ISelenium browser = BrowserHelpers.GetBrowser(); var db = DbHelpers.GetWebsiteDBDataContext(); browser.Start(); browser.Open("http://www.red-gate.com/dynamic/shoppingCart/ProductOption.aspx?Product=ReflectorPro"); //Act browser = ShoppingCartHelpers.TraverseShoppingCart(browser, 1, 0, ".NET Reflector Pro"); var priceResult = PriceHelpers.GetNewPurchasePrice(db, "ReflectorPro", 1, 0, Currencies.Euros); //Assert Assert.AreEqual(priceResult.Price, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl01_Price")); Assert.AreEqual(priceResult.Tax, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Tax")); Assert.AreEqual(priceResult.Total, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Total")); } This is pretty much the same as the xUnit version. The exceptions are that the attributes have changed, the //Arrange phase now has to handle setting up the ISelenium object, as the attribute that previously did this has gone away, and the test now sets up its own database connection. Previously I was using a shared database connection, but this approach becomes more complicated when tests are being executed concurrently. To avoid complexity each test has its own connection, which it is responsible for closing. For the sake of readability, I snipped out the code that closes the browser session and the db connection at the end of the test. With all that done, there was only one more step required before the tests would execute concurrently. It is necessary to tell the test runner which tests are eligible to run in parallel, via the [Parallelizable] attribute. This can be done at the test, fixture or assembly level. Since I wanted to run all tests concurrently, I marked mine at the assembly level in the AssemblyInfo.cs using the following: [assembly: DegreeOfParallelism(3)] [assembly: Parallelizable(TestScope.All)] The second attribute marks all tests in the assembly as [Parallelizable], whilst the first tells the test runner how many concurrent threads to use when executing the tests. I set mine to three since I was using 3 RCs in separate VMs. With everything now in place, I fired up the Icarus* test runner that comes with MbUnit. Executing my 372 tests three at a time instead of one at a time reduced the running time from 2 hours 10 minutes, to 55 minutes, that's an improvement of about 58%! I'd like to have seen an improvement of 66%, but I can understand that either inefficiencies in the hub code, my test environment or the test runner code (or some combination of all three most likely) contributes to a slightly diminished improvement. That said, I'd love to hear about any experience you have in upping this efficiency. Ultimately though, it was a saving that was most definitely worth having. It makes regression testing via UI automation a far more plausible prospect. The other obvious point to make is that this approach scales far better than executing tests serially. So if ever we need to improve performance, we just register additional RC's with the hub, and up the DegreeOfParallelism. *This was just my personal preference for a GUI runner. The MbUnit/Gallio installer also provides a command line runner, a TestDriven.net runner, and a Resharper 4.5 runner. For now at least, Resharper 5 isn't supported.

Read the article

Mocking the Unmockable: Using Microsoft Moles with Gallio

- by Thomas Weller

Usual opensource mocking frameworks (like e.g. Moq or Rhino.Mocks) can mock only interfaces and virtual methods. In contrary to that, Microsoft’s Moles framework can ‘mock’ virtually anything, in that it uses runtime instrumentation to inject callbacks in the method MSIL bodies of the moled methods. Therefore, it is possible to detour any .NET method, including non-virtual/static methods in sealed types. This can be extremely helpful when dealing e.g. with code that calls into the .NET framework, some third-party or legacy stuff etc… Some useful collected resources (links to website, documentation material and some videos) can be found in my toolbox on Delicious under this link: http://delicious.com/thomasweller/toolbox+moles A Gallio extension for Moles Originally, Moles is a part of Microsoft’s Pex framework and thus integrates best with Visual Studio Unit Tests (MSTest). However, the Moles sample download contains some additional assemblies to also support other unit test frameworks. They provide a Moled attribute to ease the usage of mole types with the respective framework (there are extensions for NUnit, xUnit.net and MbUnit v2 included with the samples). As there is no such extension for the Gallio platform, I did the few required lines myself – the resulting Gallio.Moles.dll is included with the sample download. With this little assembly in place, it is possible to use Moles with Gallio like that: [Test, Moled] public void SomeTest() { ... What you can do with it Moles can be very helpful, if you need to ‘mock’ something other than a virtual or interface-implementing method. This might be the case when dealing with some third-party component, legacy code, or if you want to ‘mock’ the .NET framework itself. Generally, you need to announce each moled type that you want to use in a test with the MoledType attribute on assembly level. For example: [assembly: MoledType(typeof(System.IO.File))] Below are some typical use cases for Moles. For a more detailed overview (incl. naming conventions and an instruction on how to create the required moles assemblies), please refer to the reference material above. Detouring the .NET framework Imagine that you want to test a method similar to the one below, which internally calls some framework method: public void ReadFileContent(string fileName) { this.FileContent = System.IO.File.ReadAllText(fileName); } Using a mole, you would replace the call to the File.ReadAllText(string) method with a runtime delegate like so: [Test, Moled] [Description("This 'mocks' the System.IO.File class with a custom delegate.")] public void ReadFileContentWithMoles() { // arrange ('mock' the FileSystem with a delegate) System.IO.Moles.MFile.ReadAllTextString = (fname => fname == FileName ? FileContent : "WrongFileName"); // act var testTarget = new TestTarget.TestTarget(); testTarget.ReadFileContent(FileName); // assert Assert.AreEqual(FileContent, testTarget.FileContent); } Detouring static methods and/or classes A static method like the below… public static string StaticMethod(int x, int y) { return string.Format("{0}{1}", x, y); } … can be ‘mocked’ with the following: [Test, Moled] public void StaticMethodWithMoles() { MStaticClass.StaticMethodInt32Int32 = ((x, y) => "uups"); var result = StaticClass.StaticMethod(1, 2); Assert.AreEqual("uups", result); } Detouring constructors You can do this delegate thing even with a class’ constructor. The syntax for this is not all too intuitive, because you have to setup the internal state of the mole, but generally it works like a charm. For example, to replace this c’tor… public class ClassWithCtor { public int Value { get; private set; } public ClassWithCtor(int someValue) { this.Value = someValue; } } … you would do the following: [Test, Moled] public void ConstructorTestWithMoles() { MClassWithCtor.ConstructorInt32 = ((@class, @value) => new MClassWithCtor(@class) {ValueGet = () => 99}); var classWithCtor = new ClassWithCtor(3); Assert.AreEqual(99, classWithCtor.Value); } Detouring abstract base classes You can also use this approach to ‘mock’ abstract base classes of a class that you call in your test. Assumed that you have something like that: public abstract class AbstractBaseClass { public virtual string SaySomething() { return "Hello from base."; } } public class ChildClass : AbstractBaseClass { public override string SaySomething() { return string.Format( "Hello from child. Base says: '{0}'", base.SaySomething()); } } Then you would set up the child’s underlying base class like this: [Test, Moled] public void AbstractBaseClassTestWithMoles() { ChildClass child = new ChildClass(); new MAbstractBaseClass(child) { SaySomething = () => "Leave me alone!" } .InstanceBehavior = MoleBehaviors.Fallthrough; var hello = child.SaySomething(); Assert.AreEqual("Hello from child. Base says: 'Leave me alone!'", hello); } Setting the moles behavior to a value of MoleBehaviors.Fallthrough causes the ‘original’ method to be called if a respective delegate is not provided explicitly – here it causes the ChildClass’ override of the SaySomething() method to be called. There are some more possible scenarios, where the Moles framework could be of much help (e.g. it’s also possible to detour interface implementations like IEnumerable<T> and such…). One other possibility that comes to my mind (because I’m currently dealing with that), is to replace calls from repository classes to the ADO.NET Entity Framework O/R mapper with delegates to isolate the repository classes from the underlying database, which otherwise would not be possible… Usage Since Moles relies on runtime instrumentation, mole types must be run under the Pex profiler. This only works from inside Visual Studio if you write your tests with MSTest (Visual Studio Unit Test). While other unit test frameworks generally can be used with Moles, they require the respective tests to be run via command line, executed through the moles.runner.exe tool. A typical test execution would be similar to this: moles.runner.exe <mytests.dll> /runner:<myframework.console.exe> /args:/<myargs> So, the moled test can be run through tools like NCover or a scripting tool like MSBuild (which makes them easy to run in a Continuous Integration environment), but they are somewhat unhandy to run in the usual TDD workflow (which I described in some detail here). To make this a bit more fluent, I wrote a ReSharper live template to generate the respective command line for the test (it is also included in the sample download – moled_cmd.xml). - This is just a quick-and-dirty ‘solution’. Maybe it makes sense to write an extra Gallio adapter plugin (similar to the many others that are already provided) and include it with the Gallio download package, if there’s sufficient demand for it. As of now, the only way to run tests with the Moles framework from within Visual Studio is by using them with MSTest. From the command line, anything with a managed console runner can be used (provided that the appropriate extension is in place)… A typical Gallio/Moles command line (as generated by the mentioned R#-template) looks like that: "%ProgramFiles%\Microsoft Moles\bin\moles.runner.exe" /runner:"%ProgramFiles%\Gallio\bin\Gallio.Echo.exe" "Gallio.Moles.Demo.dll" /args:/r:IsolatedAppDomain /args:/filter:"ExactType:TestFixture and Member:ReadFileContentWithMoles" -- Note: When using the command line with Echo (Gallio’s console runner), be sure to always include the IsolatedAppDomain option, otherwise the tests won’t use the instrumentation callbacks! -- License issues As I already said, the free mocking frameworks can mock only interfaces and virtual methods. if you want to mock other things, you need the Typemock Isolator tool for that, which comes with license costs (Although these ‘costs’ are ridiculously low compared to the value that such a tool can bring to a software project, spending money often is a considerable gateway hurdle in real life...). The Moles framework also is not totally free, but comes with the same license conditions as the (closely related) Pex framework: It is free for academic/non-commercial use only, to use it in a ‘real’ software project requires an MSDN Subscription (from VS2010pro on). The demo solution The sample solution (VS 2008) can be downloaded from here. It contains the Gallio.Moles.dll which provides the here described Moled attribute, the above mentioned R#-template (moled_cmd.xml) and a test fixture containing the above described use case scenarios. To run it, you need the Gallio framework (download) and Microsoft Moles (download) being installed in the default locations. Happy testing…

Read the article

13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

- by user1898041

Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

Read the article

Invalid XML in persistence.xml : Init method

- by James.Elsey

I'm getting the following error when I try to startup my application on google app engine: Failed startup of context com.google.apphosting.utils.jetty.RuntimeAppEngineWebAppContext@8fcc7b{/,/base/data/home/apps/sales-tracker/3.340980411948080671} org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'clientDao' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Cannot resolve reference to bean 'entityManagerFactory' while setting bean property 'entityManagerFactory'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'entityManagerFactory' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is java.lang.IllegalArgumentException: Invalid XML in persistence unit from URL [file:/base/data/home/apps/sales-tracker/3.340980411948080671/WEB-INF/classes/META-INF/persistence.xml] at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:275) at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409) at java.security.AccessController.doPrivileged(Native Method) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:548) at org.mortbay.jetty.servlet.Context.startContext(Context.java:136) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.createHandler(AppVersionHandlerMap.java:191) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.getHandler(AppVersionHandlerMap.java:168) at com.google.apphosting.runtime.jetty.JettyServletEngineAdapter.serviceRequest(JettyServletEngineAdapter.java:123) at com.google.apphosting.runtime.JavaRuntime.handleRequest(JavaRuntime.java:243) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5485) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5483) at com.google.net.rpc.impl.BlockingApplicationHandler.handleRequest(BlockingApplicationHandler.java:24) at com.google.net.rpc.impl.RpcUtil.runRpcInApplication(RpcUtil.java:398) at com.google.net.rpc.impl.Server$2.run(Server.java:852) at com.google.tracing.LocalTraceSpanRunnable.run(LocalTraceSpanRunnable.java:56) at com.google.tracing.LocalTraceSpanBuilder.internalContinueSpan(LocalTraceSpanBuilder.java:536) at com.google.net.rpc.impl.Server.startRpc(Server.java:807) at com.google.net.rpc.impl.Server.processRequest(Server.java:369) at com.google.net.rpc.impl.ServerConnection.messageReceived(ServerConnection.java:442) at com.google.net.rpc.impl.RpcConnection.parseMessages(RpcConnection.java:319) at com.google.net.rpc.impl.RpcConnection.dataReceived(RpcConnection.java:290) at com.google.net.async.Connection.handleReadEvent(Connection.java:474) at com.google.net.async.EventDispatcher.processNetworkEvents(EventDispatcher.java:831) at com.google.net.async.EventDispatcher.internalLoop(EventDispatcher.java:207) at com.google.net.async.EventDispatcher.loop(EventDispatcher.java:103) at com.google.net.rpc.RpcService.runUntilServerShutdown(RpcService.java:251) at com.google.apphosting.runtime.JavaRuntime$RpcRunnable.run(JavaRuntime.java:404) at java.lang.Thread.run(Unknown Source) Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'entityManagerFactory' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Invocation of init method failed; nested exception is java.lang.IllegalArgumentException: Invalid XML in persistence unit from URL [file:/base/data/home/apps/sales-tracker/3.340980411948080671/WEB-INF/classes/META-INF/persistence.xml] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1338) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409) at java.security.AccessController.doPrivileged(Native Method) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164) at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269) ... 47 more Caused by: java.lang.IllegalArgumentException: Invalid XML in persistence unit from URL [file:/base/data/home/apps/sales-tracker/3.340980411948080671/WEB-INF/classes/META-INF/persistence.xml] at org.springframework.orm.jpa.persistenceunit.PersistenceUnitReader.readPersistenceUnitInfos(PersistenceUnitReader.java:151) at org.springframework.orm.jpa.persistenceunit.DefaultPersistenceUnitManager.readPersistenceUnitInfos(DefaultPersistenceUnitManager.java:303) at org.springframework.orm.jpa.persistenceunit.DefaultPersistenceUnitManager.preparePersistenceUnitInfos(DefaultPersistenceUnitManager.java:275) at org.springframework.orm.jpa.persistenceunit.DefaultPersistenceUnitManager.afterPropertiesSet(DefaultPersistenceUnitManager.java:260) at org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean.createNativeEntityManagerFactory(LocalContainerEntityManagerFactoryBean.java:192) at org.springframework.orm.jpa.AbstractEnti My persistence.xml looks as follows, as taken from the GAE documentation <?xml version="1.0" encoding="UTF-8" ?> <persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"version="1.0"> <persistence-unit name="transactions-optional"> <provider>org.datanucleus.store.appengine.jpa.DatastorePersistenceProvider</provider> <properties> <property name="datanucleus.NontransactionalRead" value="true" /> <property name="datanucleus.NontransactionalWrite" value="true" /> <property name="datanucleus.ConnectionURL" value="appengine" /> </properties> </persistence-unit> </persistence> Is there something wrong with my persistence file? Or could my errors be caused elsewhere? Can someone please give me some pointers thanks

Read the article

More Fun with C# Iterators and Generators

- by James Michael Hare

In my last post, I talked quite a bit about iterators and how they can be really powerful tools for filtering a list of items down to a subset of items. This had both pros and cons over returning a full collection, which, in summary, were: Pros: If traversal is only partial, does not have to visit rest of collection. If evaluation method is costly, only incurs that cost on elements visited. Adds little to no garbage collection pressure. Cons: Very slight performance impact if you know caller will always consume all items in collection. And as we saw in the last post, that con for the cost was very, very small and only really became evident on very tight loops consuming very large lists completely. One of the key items to note, though, is the garbage! In the traditional (return a new collection) method, if you have a 1,000,000 element collection, and wish to transform or filter it in some way, you have to allocate space for that copy of the collection. That is, say you have a collection of 1,000,000 items and you want to double every item in the collection. Well, that means you have to allocate a collection to hold those 1,000,000 items to return, which is a lot especially if you are just going to use it once and toss it. Iterators, though, don't have this problem. Each time you visit the node, it would return the doubled value of the node (in this example) and not allocate a second collection of 1,000,000 doubled items. Do you see the distinction? In both cases, we're consuming 1,000,000 items. But in one case we pass back each doubled item which is just an int (for example's sake) on the stack and in the other case, we allocate a list containing 1,000,000 items which then must be garbage collected. So iterators in C# are pretty cool, eh? Well, here's one more thing a C# iterator can do that a traditional "return a new collection" transformation can't! It can return **unbounded** collections! I know, I know, that smells a lot like an infinite loop, eh? Yes and no. Basically, you're relying on the caller to put the bounds on the list, and as long as the caller doesn't you keep going. Consider this example: public static class Fibonacci { // returns the infinite fibonacci sequence public static IEnumerable<int> Sequence() { int iteration = 0; int first = 1; int second = 1; int current = 0; while (true) { if (iteration++ < 2) { current = 1; } else { current = first + second; second = first; first = current; } yield return current; } } } Whoa, you say! Yes, that's an infinite loop! What the heck is going on there? Yes, that was intentional. Would it be better to have a fibonacci sequence that returns only a specific number of items? Perhaps, but that wouldn't give you the power to defer the execution to the caller. The beauty of this function is it is as infinite as the sequence itself! The fibonacci sequence is unbounded, and so is this method. It will continue to return fibonacci numbers for as long as you ask for them. Now that's not something you can do with a traditional method that would return a collection of ints representing each number. In that case you would eventually run out of memory as you got to higher and higher numbers. This method, though, never runs out of memory. Now, that said, you do have to know when you use it that it is an infinite collection and bound it appropriately. Fortunately, Linq provides a lot of these extension methods for you! Let's say you only want the first 10 fibonacci numbers: foreach(var fib in Fibonacci.Sequence().Take(10)) { Console.WriteLine(fib); } Or let's say you only want the fibonacci numbers that are less than 100: foreach(var fib in Fibonacci.Sequence().TakeWhile(f => f < 100)) { Console.WriteLine(fib); } So, you see, one of the nice things about iterators is their power to work with virtually any size (even infinite) collections without adding the garbage collection overhead of making new collections. You can also do fun things like this to make a more "fluent" interface for for loops: // A set of integer generator extension methods public static class IntExtensions { // Begins counting to inifity, use To() to range this. public static IEnumerable<int> Every(this int start) { // deliberately avoiding condition because keeps going // to infinity for as long as values are pulled. for (var i = start; ; ++i) { yield return i; } } // Begins counting to infinity by the given step value, use To() to public static IEnumerable<int> Every(this int start, int byEvery) { // deliberately avoiding condition because keeps going // to infinity for as long as values are pulled. for (var i = start; ; i += byEvery) { yield return i; } } // Begins counting to inifity, use To() to range this. public static IEnumerable<int> To(this int start, int end) { for (var i = start; i <= end; ++i) { yield return i; } } // Ranges the count by specifying the upper range of the count. public static IEnumerable<int> To(this IEnumerable<int> collection, int end) { return collection.TakeWhile(item => item <= end); } } Note that there are two versions of each method. One that starts with an int and one that starts with an IEnumerable<int>. This is to allow more power in chaining from either an existing collection or from an int. This lets you do things like: // count from 1 to 30 foreach(var i in 1.To(30)) { Console.WriteLine(i); } // count from 1 to 10 by 2s foreach(var i in 0.Every(2).To(10)) { Console.WriteLine(i); } // or, if you want an infinite sequence counting by 5s until something inside breaks you out... foreach(var i in 0.Every(5)) { if (someCondition) { break; } ... } Yes, those are kinda play functions and not particularly useful, but they show some of the power of generators and extension methods to form a fluid interface. So what do you think? What are some of your favorite generators and iterators?

Read the article

10 tape technology features that make you go hmm.

- by Karoly Vegh

A week ago an Oracle/StorageTek Tape Specialist, Christian Vanden Balck, visited Vienna, and agreed to visit customers to do techtalks and update them about the technology boom going around tape. I had the privilege to attend some of his sessions and noted the information and features that took the customers by surprise and made them think. Allow me to share the top 10: I. StorageTek as a brand: StorageTek is one of he strongest names in the Tape field. The brand itself was valued so much by customers that even after Sun Microsystems acquiring StorageTek and the Oracle acquiring Sun the brand lives on with all the Oracle tapelibraries are officially branded StorageTek.See http://www.oracle.com/us/products/servers-storage/storage/tape-storage/overview/index.html II. Disk information density limitations: Disk technology struggles with information density. You haven't seen the disk sizes exploding lately, have you? That's partly because there are physical limits on a disk platter. The size is given, the number of platters is limited, they just can't grow, and are running out of physical area to write to. Now, in a T10000C tape cartridge we have over 1000m long tape. There you go, you have got your physical space and don't need to stuff all that data crammed together. You can write in a reliable pattern, and have space to grow too. III. Oracle has a market share of 62% worldwide in recording head manufacturing. That's right. If you are running LTO drives, with a good chance you rely on StorageTek production. That's two out of three LTO recording heads produced worldwide. IV. You can store 1 Exabyte data in a single tape library. Yes, an Exabyte. That is 1000 Petabytes. Or, a million Terabytes. A thousand million GigaBytes. You can store that in a stacked StorageTek SL8500 tapelibrary. In one SL8500 you can put 10.000 T10000C cartridges, that store 10TB data (compressed). You can stack 10 of these SL8500s together. Boom. 1000.000 TB.(n.b.: stacking means interconnecting the libraries. Yes, cartridges are moved between the stacked libraries automatically.) V. EMC: 'Tape doesn't suck after all. We moved on.': Do you remember the infamous 'Tape sucks, move on' Datadomain slogan? Of course they had to put it that way, having only had disk products. But here's a fun fact: on the EMCWorld 2012 there was a major presence of a Tape-tech company - EMC, in a sudden burst of sanity is embracing tape again. VI. The miraculous T10000C: Oracle StorageTek has developed an enterprise-grade tapedrive and cartridge, the T10000C. With awesome numbers: The Cartridge: Native 5TB capacity, 10TB with compression Over a kilometer long tape within the cartridge. And it's locked when unmounted, no rattling of your data. Replaced the metalparticles datalayer with BaFe (bariumferrite) - metalparticles lose around 7% of magnetism within 30 days. BaFe does not. Yes we employ solid-state physicists doing R&D on demagnetisation in our labs. Can be partitioned, storage tiering within the cartridge! The Drive: 2GB Cache Encryption implemented in HW - no performance hit 252 MB/s native sustained data rate, beats disk technology by far. Not to mention peak throughput. Leading the tape while never touching the data side of it, protecting your data physically too Data integritiy checking (CRC recalculation) on tape within the drive without having to read it back to the server reordering data from tape-order, delivering it back in application-order writing 32 tracks at once, reading them back for CRC check at once VII. You only use 20% of your data on a regular basis. The rest 80% is just lying around for years. On continuously spinning disks. Doubly consuming energy (power+cooling), blocking diskstorage capacity. There is a solution called SAM (Storage Archive Manager) that provides you a filesystem unifying disk and tape, moving data on-demand and for clients transparently between the different storage tiers. You can share these filesystems with NFS or CIFS for clients, and enjoy the low TCO of tape. Tapes don't spin. They sit quietly in their slots, storing 10TB data, using no energy, producing no heat, automounted when a client accesses their data.See: http://www.oracle.com/us/products/servers-storage/storage/storage-software/storage-archive-manager/overview/index.html VIII. HW supported for three decades: Did you know that the original PowderHorn library was released in '87 and has been only discontinued in 2010? That is over two decades of supported operation. Tape libraries are - just like the data carrying on tapecartridges - built for longevity. Oh, and the T10000C cartridge has 30-year archival life for long-term retention. IX. Tape is easy to manage: Have you heard of Tape Storage Analytics? It is a central graphical tool to summarize, monitor, analyze dataflow, health and performance of drives and libraries, see: http://www.oracle.com/us/products/servers-storage/storage/tape-storage/tape-analytics/overview/index.html X. The next generation: The T10000B drives were able to reuse the T10000A cartridges and write on them even more data. On the same cartridges. We call this investment protection, and this is very important for Oracle for the future too. We usually support two generations of cartridges together. The current drive is a T10000C. (...I know I promised to enlist 10, but I got still two more I really want to mention. Allow me to work around the problem: ) X++. The TallBots, the robots moving around the cartridges in the StorageTek library from tapeslots to the drives are cableless. Cables, belts, chains running to moving parts in a library cause maintenance downtimes. So StorageTek eliminated them. The TallBots get power, commands, even firmwareupgrades through the rails they are running on. Also, the TallBots don't just hook'n'pull the tapes out of their slots, they actually grip'n'lift them out. No friction, no scratches, no zillion little plastic particles floating around in the library, in the drives, on your data. (X++)++: Tape beats SSDs and Disks. In terms of throughput (252 MB/s), in terms of TCO: disks cause around 290x more power and cooling, in terms of capacity: 10TB on a single media and soon more. So... do you need to store large amounts of data? Are you legally bound to archive it for dozens of years? Would you benefit from automatic storage tiering? Have you got large mediachunks to be streamed at times? Have you got power and cooling issues in the growing datacenters? Do you find EMC's 180° turn of tape attitude interesting, but appreciate it at the same time? With all that, you aren't alone. The most data on this planet is stored on tape. Tape is coming. Big time.

Read the article

Consuming the Amazon S3 service from a Win8 Metro Application

- by cibrax

As many of the existing Http APIs for Cloud Services, AWS also provides a set of different platform SDKs for hiding many of complexities present in the APIs. While there is a platform SDK for .NET, which is open source and available in C#, that SDK does not work in Win8 Metro Applications for the changes introduced in WinRT. WinRT offers a complete different set of APIs for doing I/O operations such as doing http calls or using cryptography for signing or encrypting data, two aspects that are absolutely necessary for consuming AWS. All the I/O APIs available as part of WinRT are asynchronous, and uses the TPL model for .NET applications (HTML and JavaScript Metro applications use a model based in promises, which is similar concept). In the case of S3, the http Authorization header is used for two purposes, authenticating clients and make sure the messages were not altered while they were in transit. For doing that, it uses a signature or hash of the message content and some of the headers using a symmetric key (That's just one of the available mechanisms). Windows Azure for example also uses the same mechanism in many of its APIs. There are three challenges that any developer working for first time in Metro will have to face to consume S3, the new WinRT APIs, the asynchronous nature of them and the complexity introduced for generating the Authorization header. Having said that, I decided to write this post with some of the gotchas I found myself trying to consume this Amazon service. 1. Generating the signature for the Authorization header All the cryptography APIs in WinRT are available under Windows.Security.Cryptography namespace. Many of operations available in these APIs uses the concept of buffers (IBuffer) for representing a chunk of binary data. As you will see in the example below, these buffers are mainly generated with the use of static methods in a WinRT class CryptographicBuffer available as part of the namespace previously mentioned. private string DeriveAuthToken(string resource, string httpMethod, string timestamp) { var stringToSign = string.Format("{0}\n" + "\n" + "\n" + "\n" + "x-amz-date:{1}\n" + "/{2}/", httpMethod, timestamp, resource); var algorithm = MacAlgorithmProvider.OpenAlgorithm("HMAC_SHA1"); var keyMaterial = CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(this.secret)); var hmacKey = algorithm.CreateKey(keyMaterial); var signature = CryptographicEngine.Sign( hmacKey, CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(stringToSign)) ); return CryptographicBuffer.EncodeToBase64String(signature); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The algorithm that determines the information or content you need to use for generating the signature is very well described as part of the AWS documentation. In this case, this method is generating a signature required for creating a new bucket. A HmacSha1 hash is computed using a secret or symetric key provided by AWS in the management console. 2. Sending an Http Request to the S3 service WinRT also ships with the System.Net.Http.HttpClient that was first introduced some months ago with ASP.NET Web API. This client provides a rich interface on top the traditional WebHttpRequest class, and also solves some of limitations found in this last one. There are a few things that don't work with a raw WebHttpRequest such as setting the Host header, which is something absolutely required for consuming S3. Also, HttpClient is more friendly for doing unit tests, as it receives a HttpMessageHandler as part of the constructor that can fake to emulate a real http call. This is how the code for consuming the service with HttpClient looks like, public async Task<S3Response> CreateBucket(string name, string region = null, params string[] acl) { var timestamp = string.Format("{0:r}", DateTime.UtcNow); var auth = DeriveAuthToken(name, "PUT", timestamp); var request = new HttpRequestMessage(HttpMethod.Put, "http://s3.amazonaws.com/"); request.Headers.Host = string.Format("{0}.s3.amazonaws.com", name); request.Headers.TryAddWithoutValidation("Authorization", "AWS " + this.key + ":" + auth); request.Headers.Add("x-amz-date", timestamp); var client = new HttpClient(); var response = await client.SendAsync(request); return new S3Response { Succeed = response.StatusCode == HttpStatusCode.OK, Message = (response.Content != null) ? await response.Content.ReadAsStringAsync() : null }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You will notice a few additional things in this code. By default, HttpClient validates the values for some well-know headers, and Authorization is one of them. It won't allow you to set a value with ":" on it, which is something that S3 expects. However, that's not a problem at all, as you can skip the validation by using the TryAddWithoutValidation method. Also, the code is heavily relying on the new async and await keywords to transform all the asynchronous calls into synchronous ones. In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can use this handler for injecting any response while you are unit testing the code.

Read the article

Consuming the Amazon S3 service from a Win8 Metro Application

- by cibrax

As many of the existing Http APIs for Cloud Services, AWS also provides a set of different platform SDKs for hiding many of complexities present in the APIs. While there is a platform SDK for .NET, which is open source and available in C#, that SDK does not work in Win8 Metro Applications for the changes introduced in WinRT. WinRT offers a complete different set of APIs for doing I/O operations such as doing http calls or using cryptography for signing or encrypting data, two aspects that are absolutely necessary for consuming AWS. All the I/O APIs available as part of WinRT are asynchronous, and uses the TPL model for .NET applications (HTML and JavaScript Metro applications use a model based in promises, which is similar concept). In the case of S3, the http Authorization header is used for two purposes, authenticating clients and make sure the messages were not altered while they were in transit. For doing that, it uses a signature or hash of the message content and some of the headers using a symmetric key (That's just one of the available mechanisms). Windows Azure for example also uses the same mechanism in many of its APIs. There are three challenges that any developer working for first time in Metro will have to face to consume S3, the new WinRT APIs, the asynchronous nature of them and the complexity introduced for generating the Authorization header. Having said that, I decided to write this post with some of the gotchas I found myself trying to consume this Amazon service. 1. Generating the signature for the Authorization header All the cryptography APIs in WinRT are available under Windows.Security.Cryptography namespace. Many of operations available in these APIs uses the concept of buffers (IBuffer) for representing a chunk of binary data. As you will see in the example below, these buffers are mainly generated with the use of static methods in a WinRT class CryptographicBuffer available as part of the namespace previously mentioned. private string DeriveAuthToken(string resource, string httpMethod, string timestamp) { var stringToSign = string.Format("{0}\n" + "\n" + "\n" + "\n" + "x-amz-date:{1}\n" + "/{2}/", httpMethod, timestamp, resource); var algorithm = MacAlgorithmProvider.OpenAlgorithm("HMAC_SHA1"); var keyMaterial = CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(this.secret)); var hmacKey = algorithm.CreateKey(keyMaterial); var signature = CryptographicEngine.Sign( hmacKey, CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(stringToSign)) ); return CryptographicBuffer.EncodeToBase64String(signature); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The algorithm that determines the information or content you need to use for generating the signature is very well described as part of the AWS documentation. In this case, this method is generating a signature required for creating a new bucket. A HmacSha1 hash is computed using a secret or symetric key provided by AWS in the management console. 2. Sending an Http Request to the S3 service WinRT also ships with the System.Net.Http.HttpClient that was first introduced some months ago with ASP.NET Web API. This client provides a rich interface on top the traditional WebHttpRequest class, and also solves some of limitations found in this last one. There are a few things that don't work with a raw WebHttpRequest such as setting the Host header, which is something absolutely required for consuming S3. Also, HttpClient is more friendly for doing unit tests, as it receives a HttpMessageHandler as part of the constructor that can fake to emulate a real http call. This is how the code for consuming the service with HttpClient looks like, public async Task<S3Response> CreateBucket(string name, string region = null, params string[] acl) { var timestamp = string.Format("{0:r}", DateTime.UtcNow); var auth = DeriveAuthToken(name, "PUT", timestamp); var request = new HttpRequestMessage(HttpMethod.Put, "http://s3.amazonaws.com/"); request.Headers.Host = string.Format("{0}.s3.amazonaws.com", name); request.Headers.TryAddWithoutValidation("Authorization", "AWS " + this.key + ":" + auth); request.Headers.Add("x-amz-date", timestamp); var client = new HttpClient(); var response = await client.SendAsync(request); return new S3Response { Succeed = response.StatusCode == HttpStatusCode.OK, Message = (response.Content != null) ? await response.Content.ReadAsStringAsync() : null }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You will notice a few additional things in this code. By default, HttpClient validates the values for some well-know headers, and Authorization is one of them. It won't allow you to set a value with ":" on it, which is something that S3 expects. However, that's not a problem at all, as you can skip the validation by using the TryAddWithoutValidation method. Also, the code is heavily relying on the new async and await keywords to transform all the asynchronous calls into synchronous ones. In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can use this handler for injecting any response while you are unit testing the code.

Read the article

Applications: The Mathematics of Movement, Part 2

- by TechTwaddle

In part 1 of this series we saw how we can make the marble move towards the click point, with a fixed speed. In this post we’ll see, first, how to get rid of Atan2(), sine() and cosine() in our calculations, and, second, reducing the speed of the marble as it approaches the destination, so it looks like the marble is easing into it’s final position. As I mentioned in one of the previous posts, this is achieved by making the speed of the marble a function of the distance between the marble and the destination point. Getting rid of Atan2(), sine() and cosine() Ok, to be fair we are not exactly getting rid of these trigonometric functions, rather, replacing one form with another. So instead of writing sin(?), we write y/length. You see the point. So instead of using the trig functions as below, double x = destX - marble1.x; double y = destY - marble1.y; //distance between destination and current position, before updating marble position distanceSqrd = x * x + y * y; double angle = Math.Atan2(y, x); //Cos and Sin give us the unit vector, 6 is the value we use to magnify the unit vector along the same direction incrX = speed * Math.Cos(angle); incrY = speed * Math.Sin(angle); marble1.x += incrX; marble1.y += incrY; we use the following, double x = destX - marble1.x; double y = destY - marble1.y; //distance between destination and marble (before updating marble position) lengthSqrd = x * x + y * y; length = Math.Sqrt(lengthSqrd); //unit vector along the same direction as vector(x, y) unitX = x / length; unitY = y / length; //update marble position incrX = speed * unitX; incrY = speed * unitY; marble1.x += incrX; marble1.y += incrY; so we replaced cos(?) with x/length and sin(?) with y/length. The result is the same. Adding oomph to the way it moves In the last post we had the speed of the marble fixed at 6, double speed = 6; to make the marble decelerate as it moves, we have to keep updating the speed of the marble in every frame such that the speed is calculated as a function of the length. So we may have, speed = length/12; ‘length’ keeps decreasing as the marble moves and so does speed. The Form1_MouseUp() function remains the same as before, here is the UpdatePosition() method, private void UpdatePosition() { double incrX = 0, incrY = 0; double lengthSqrd = 0, length = 0, lengthSqrdNew = 0; double unitX = 0, unitY = 0; double speed = 0; double x = destX - marble1.x; double y = destY - marble1.y; //distance between destination and marble (before updating marble position) lengthSqrd = x * x + y * y; length = Math.Sqrt(lengthSqrd); //unit vector along the same direction as vector(x, y) unitX = x / length; unitY = y / length; //speed as a function of length speed = length / 12; //update marble position incrX = speed * unitX; incrY = speed * unitY; marble1.x += incrX; marble1.y += incrY; //check for bounds if ((int)marble1.x < MinX + marbleWidth / 2) { marble1.x = MinX + marbleWidth / 2; } else if ((int)marble1.x > (MaxX - marbleWidth / 2)) { marble1.x = MaxX - marbleWidth / 2; } if ((int)marble1.y < MinY + marbleHeight / 2) { marble1.y = MinY + marbleHeight / 2; } else if ((int)marble1.y > (MaxY - marbleHeight / 2)) { marble1.y = MaxY - marbleHeight / 2; } //distance between destination and marble (after updating marble position) x = destX - (marble1.x); y = destY - (marble1.y); lengthSqrdNew = x * x + y * y; /* * End Condition: * 1. If there is not much difference between lengthSqrd and lengthSqrdNew * 2. If the marble has moved more than or equal to a distance of totLenToTravel (see Form1_MouseUp) */ x = startPosX - marble1.x; y = startPosY - marble1.y; double totLenTraveledSqrd = x * x + y * y; if ((int)totLenTraveledSqrd >= (int)totLenToTravelSqrd) { System.Console.WriteLine("Stopping because Total Len has been traveled"); timer1.Enabled = false; } else if (Math.Abs((int)lengthSqrd - (int)lengthSqrdNew) < 4) { System.Console.WriteLine("Stopping because no change in Old and New"); timer1.Enabled = false; } } A point to note here is that, in this implementation, the marble never stops because it travelled a distance of totLenToTravelSqrd (first if condition). This happens because speed is a function of the length. During the final few frames length becomes very small and so does speed; and so the amount by which the marble shifts is quite small, and the second if condition always hits true first. I’ll end this series with a third post. In part 3 we will cover two things, one, when the user clicks, the marble keeps moving in that direction, rebounding off the screen edges and keeps moving forever. Two, when the user clicks on the screen, the marble moves towards it, with it’s speed reducing by every frame. It doesn’t come to a halt when the destination point is reached, instead, it continues to move, rebounds off the screen edges and slowly comes to halt. The amount of time that the marble keeps moving depends on how far the user clicks from the marble. I had mentioned this second situation here. Finally, here’s a video of this program running,

Read the article

What is the Oracle Utilities Application Framework?

- by Anthony Shorten

The Oracle Utilities Application Framework is a reusable, scalable and flexible java based framework which allows other products to be built, configured and implemented in a standard way. Note: Even though the Framework is built in java it can be integrated with COBOL based extensions for backward compatibility. When Oracle Utilities Customer Care & Billing was migrated from V1 to V2, it was decided that the technical aspects of that product be separated to allow for reuse and independence from technical issues. The idea was that all the technical aspects would be concentrated in this separate product (i.e. a framework) and allow all products using the framework to concentrate on delivering superior functionality. The product was named the Oracle Utilities Application Framework (oufw is the product code). The technical components are contained in the Oracle Utilities Application Framework which can be summarized as follows: Metadata - The Oracle Utilities Application Framework is responsible for defining and using the metadata to define the runtime behavior of the product. All the metadata definition and management is contained within the Oracle Utilities Application Framework. UI Management - The Oracle Utilities Application Framework is responsible for defining and rendering the pages and responsible for ensuring the pages are in the appropriate format for the locale. Integration - The Oracle Utilities Application Framework is responsible for providing the integration points to the architecture. Refer to the Oracle Utilities Application Framework Integration Overview for more details Tools - The Oracle Utilities Application Framework provides a common set of facilities and tools that can be used across all products. Technology - The Oracle Utilities Application Framework is responsible for all technology standards compliance, platform support and integration. There are a number of products from the Tax and Utilities Global Business Unit as well as from the Financial Services Global Business Unit that are built upon the Oracle Utilities Application Framework. These products require the Oracle Utilities Application Framework to be installed first and then the product itself installed onto the framework to complete the installation process. There are a number of key benefits that the Oracle Utilities Application Framework provides to these products: Common facilities - The Oracle Utilities Application Framework provides a standard set of technical facilities that mean that products can concentrate in the unique aspects of their markets rather than making technical decisions. Common methods of configuration - The Oracle Utilities Application Framework standardizes the technical configuration process for a product. Customers can effectively reuse the configuration process across products. Multi-lingual and Multi-platform - The Oracle Utilities Application Framework allows the products to be offered in more markets and across multiple platforms for maximized flexibility. Common methods of implementation - The Oracle Utilities Application Framework standardizes the technical aspects of a product implementation. Customers can effectively reuse the technical implementation process across products. Quicker adoption of new technologies - As new technologies and standards are identified as being important for the product line, they can be integrated centrally benefiting multiple products. Cross product reuse - As enhancements to the Oracle Utilities Application Framework are identified by a particular product, all products can potentially benefit from the enhancement. Note: Use of the Oracle Utilities Application Framework does not preclude the introduction of product specific technologies or facilities to satisfy market needs. The framework minimizes the need and assists in the quick integration of a new product specific piece of technology (if necessary). The Framework is not available as a product itself and is bundled with Tax and Utilities Global Business Unit prodicts. At the present time the following products are on the Framework: Oracle Utilities Customer Care And Billing (V2 and above) Oracle Enterprise Taxation Management (V2 and above) Oracle Utilities Business Intelligence (V2 and above) Oracle Utilities Mobile Workforice Management (V2 and above)

Search Results

Search found 11246 results on 450 pages for 'power supply unit'.

Page 155/450 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162 | Next Page >

- by zSysop

- by Schroedinger

- by xmax

- by lox

- by Confused

- by Dan W

- by cmaduro

- by xioxox

- by Ray ForRespect

- by DaveDev

- by mbridge

- by sreejukg

- by Blaine

- by Ben Adderson

- by Thomas Weller

- by user1898041

- by James.Elsey

- by James Michael Hare

- by Karoly Vegh

- by cibrax

- by cibrax

- by TechTwaddle

- by Anthony Shorten

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162 | Next Page >