Search Results

Search found 18907 results on 757 pages for 'computer history'.

Page 157/757 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• Laptop shuts down randomly without warning

  - by Robert P.

  My Asus Zenbook UX32V turns off randomly when I'm working on it. This happens both when the computer is recently turned on (5 minutes), and after being on for several days. I'm not running any heavy software The laptop is not heating The fan is not working on the maximum capacity (it's not heating) It happens when the laptop is lying still on the table It is no warning, it simply goes black It happens both when charging and on battery My guess is that it suddenly lose power somehow. What puzzles me is that I can flip the laptop upside down, sideways, shake it, etc. without it shutting off. This makes me think it's not something that's loose causing occasional short-circuits. I realize that the laptop probably doesn't like flipping and shaking, but it was the best way I could troubleshoot. I rarely turn the computer off, only have it in hibernate or sleep mode (most often hibernate). I've never experienced that the laptop is off when I wake it up from sleep mode. I've had the problem for a few months and it happens 2-8 times a week. Specs: Asus Zenbook UX32V Windows 8.1 (it happened in Windows 8.0 too) Intel i5-3317U CPU @ 1.70GHz The laptop is approx 1.5 years, but it has a small dent on one of the sides that probably voids the warranty. The dent has been there since week one and I don't think it's related to the problems I'm having now. Does anyone have a clue what might cause this, and how it might be fixed? I've read all other questions (some of which are listed below) that seem related to my issue, but none report the same behavior as I'm experiencing. Most report heavy games, heating etc. Asus N53J Laptop randomly shuts down Laptop is randomly shutting off Computer shuts down without warning My laptop acer aspire 5720 suddenly turn off randomly Computer randomly shutting down Windows 8.1 randomly shuts self down ASUS K55VM Laptop unexpectedly shuts down

  Read the article

• How to pipe internet radio into a tuner?

  - by JW

  UPDATE: Thanks everyone for the ideas! This was an area I knew very little about but now I can talk with a little more expertise about it. Much appreciated! Visited my dad this weekend and he wants to pipe some internet radio he's found down to a tuner on quite a distance away in the house. He uses computers for only very basic things: e-mail, getting the Post crossword, checking Yahoo!, checking recipes, etc. There's currently one computer in the house (no router). My initial suggestion (without any research whatsoever) was to get a wireless router and a netbook for downstairs near the tuner, but he initially wasn't too keen about having another computer down there. Anyway, is there any computer hardware that could magically pipe the audio output from the computer down to one set of (RCA) audio inputs on the tuner? Wireless isn't necessary but it probably would be easier. Anyway, thanks for your suggestions! UPDATE Thanks everyone! Voted up all of your suggestions now that I have 15 rep. Much appreciated.

  Read the article

• USB Device Not Recognized

  - by Franky Chanyau

  Ok this one gets a little bit complicated but bare with me :D A client brought her computer in to be fixed about a week ago, she says she tried charging a new phone she bought from china and immediately after her usb keyboard and mouse stopped working (typical). I had a quick look at it but because I did not have time, I did a simple system restore and it seemed as if the issue was fixed. I promptly sent it back to her but a few days back she called saying that the issue has returned. Turns out the computer was riddled with some virus that also corrupted her XP install so I had to format the whole thing(yes I tried repairing). I hoped that the format would fix the keyboard and mouse issue but the whole thing has escalated and the computer will throw the "USB Device not recognized" error when I plug anything into the many usb ports it has. I have installed all the drivers (including the chip set drivers) for the pc and even tried the unplugging from the power for a while trick, still no luck. I am sure it is not a hardware issue, but may be wrong. This is way over my head. Can anyone help? Computer: HP Compaq DC7100, Intel Pentium 4, 512mb RAM OS: Windows XP Professional SP2

  Read the article

• Deleting certain files sits at "preparing to recycle" on Windows 7?

  - by Rachel

  We recently setup one of our users with a brand new Windows 7 computer, however she is unable to delete certain files. With some testing, I found I cannot move, rename, or view properties of these files either. When trying to delete the file, it just sits at the "Preparing to recycle" popup, however the "from" section says "Discovering items..." Clicking "More Details" on the popup shows me that it can't find the file name or where it's recycling from: Other notes... All the affected files are .pdf files that get created via a scanner. Other pdf files are fine. Opening the files works fine. I can open the file, Save As a new file, and delete the new one just fine Trying to delete the file via command prompt just sits there Rebooting the computer will let me manipulate the files like normal, however this user is responsible for scanning hundreds of documents a day and I'd rather not have to tell her to reboot her computer to delete files. The user is part of the administrator group on the computer The Owner of the affected files is the user attrib of files is just A

  Read the article

• Why can't I connect to my router's config page with Windows 7?

  - by user17940

  I've got a Belkin wireless router, and just bought a new Dell computer with Windows 7 pre-installed. I can connect to the Internet and my home network just fine, but when I try to visit my router's configuration page at http://192.168.2.1, I get a "Connection was reset" error. Nothing I do will make the router's configuration page come up in my web browser. More background information: I could always get to the router's config page from my Windows XP machine. I never had any trouble prior to getting this Windows 7 computer. I can ping 192.168.2.1 successfully from my Windows 7 computer. My PC is connected to the router by a physical CAT5 cable, not via wireless. Every device connected to my router, including the new computer, can get to the Internet with no problem. Here are some things that did not solve the problem: I tried turning off IPV6 in Windows. I tried turning off my firewall and antivirus software I tried using https instead of http I tried disabling and then enabling the network connection in Windows I tried reverting my network card driver back to an older version I have tried both Firefox and Internet Explorer web browsers. Has anyone experienced something like this before, and solved it? Thanks a lot for your help!

  Read the article

• Drivers and firmware for the LiteOn ihap-122-9 DVD drive

  - by Sandy

  I'm trying to replace the DVD drive in my old PC. LiteOn.com is a mess and I can't find a single working driver or firmware update there, or anywhere. Windows XP tries to use a default, generic driver dated 2001. (About 9 years before this drive even existed.) http://www.firmwarehq.com/download_1..._6L0H.EXE.html This correctly finds my LiteOn ihap-122-9 DVD Drive. It correctly finds that I'm currently using firmware 6L0F. It correctly tries to install 6L0H. It completes 100% but then just fails and says "contact your vendor". Does anyone know why? Where can I actually get drivers... and firmware updates... that actually work for the ihap-122-9? Apparently, the newest driver IS the 1 made 9 years before the drive existed. (Unbelievable.) And the latest firmware is the 1 that is already in the drive. (Common.) No other drive I've had in this computer ever had a problem. This brand new LiteOn is doing this: Opening MY COMPUTER now takes 60 seconds. MY COMPUTER marking the drive as "DVD F:" takes another 30 seconds. MY COMPUTER showing "Batman II" title takes another 15 seconds. Clicking and running the movie will take another 30 seconds for the main-menu to appear. The movie starts about 20 seconds later. The movie runs fine for 1-2 seconds... then stops for 5 seconds.... then starts again and plays for 1-2 seconds. Repeats for 2 hours. (It happens with all store-bought DVDs and all home-made DVDs.)

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• Chrome - Why am I automatically authenticated to a web app even after clearing browser cookies?

  - by Howiecamp

  I am accessing a web application using Chrome. If I sign out of the app and clear all Chrome history/cookies/etc (even Flash cookies which are now handled by Chrome in the same Clear History area) and then re-access the site, I am automatically logged in without being prompted for credentials. I then launched Chrome in Incognito mode and was able to reproduce the same behavior. However, the I was prompted upon the first logon while in Incognito mode. The web application behaves as expected in Internet Explorer 10. Some info about the application: It's a Sharepoint site using NTLM authentication The credentials are Active Directory-based, as the username is domain\username My connection is over the Internet and there is no AD relationship between my local Windows account, my Windows PC. In other words I (meaning my locally logged on user and my PC) are not in any way part of their AD domain. The site is running SSL on port 443 Why might Chrome be automatically authenticating me?

  Read the article

• Is a Hyperthreaded CPU more powerful and more efficient than a Dual-core CPU? [closed]

  - by user1811864

  which computer to choose with Pentium processor hello they are getting rid of the old computer equipment in the office and i have to choose the computer to take home i get first choice to pick. -15 inch lcd screen 4 gb of ram core 2 duo dual Core E8400 3.00 GHz dvd writer windows vista/ linux -15 inch crt monitor with 2 gb ram and pentium 4 2 ghz single core HT technology windows xp hardisks both 250 GB my friend is telling me to choose the second one Pentium single core HT because he told me it runs faster becuase of HT technology and cooler and consumes less current electricity so it wont get overheated because it has HT technology so it's high definition for encoding and watching HD movies and HD sound and is like a gaming pc to play internet games. And also he said the dual core 8400 runs at 3 ghz compared to the 2 ghz so it heats very much because of the two extra cores so it takes more current raising electricty bills and is not good for gaming and watching HD movies and internet flash animations and games because of getting heated everytime. And he wants to choose and take the E8400 because he has air conditioning at home so it will be safe from heating. So which one computer should i take is it really faster because of the HT High definition technology and will i be able to play internet flash card games better and watch good HD movies Youtube etc and play all the music and songs.

  Read the article

• Laptop Randomly Turning On and Off

  - by Ian Mallett

  So, I have a pretty new laptop, and one of its quirks is that, at random times (though typically in the middle of the night), it seems to wake up from sleep mode, churn a bit, and then go back into sleep mode. I write "seems" because its fans are very loud, so it's obvious when it's not asleep, but during the time it is "on", I can't see anything on the screen. I have researched the problem somewhat, and could only find similar issues; nothing identical. In those cases, it appeared that certain devices could be responsible. Nothing is plugged into my computer during this behavior, but I nonetheless disabled every device's permission to wake the computer through the device manager. This included disabling the magic packet wake for the network (despite its only having a wireless connection). Using "powercfg /lastwake" gives an empty wake history. But, I also went through all the tasks and checked if they would wake the computer. None appeared to. The problem persisted, so, after some more research, I found this, and executed it for all power schemes on the computer. The problem persists. System: OS: Windows 7 Professional CPU: Intel 990X GPU: NVIDIA GeForce 580M/12GB RAM Motherboard: Clevo X7200 Model: NP7282-S1 (Sager-built laptop)

  Read the article

• Help me find the offending process waking my Windows 7 PC from hibernate every night

  - by DavidGugick

  Recently my Windows 7 64-bit PC has started waking every night from hibernation around 3:30am. I have done the following to try and figure out what is causing the issue with no luck: Examined the Windows Event logs. Nothing is noted Ran powercfg -lastwake and that reports nothing c:\powercfg -lastwake Wake History Count - 1 Wake History [0] Wake Source Count - 0 Ran powercfg to find what devices are armed for wake. Interestingly, this reports two items (I've already unchecked the "Allow this device to wake the computer" in device manager): The keyboard and something called the "eHome Infrared Receiver (USBCIR)". This is a desktop PC and it does not have an Infrared received, so I'm not sure what that device is. Suffice to say it does not have the option to "Allow device to wake..." available in Device Manager. C:\powercfg -devicequery wake_armed eHome Infrared Receiver (USBCIR) HID Keyboard Device My next step is to disable the Keyboard from wake, but I'm not convined that's the problem. This is on a Dell XPS435 if that helps anyone.

  Read the article

• How to configure a large mtu (linux)

  - by Somejan

  I have a gigabit ethernet connection from my laptop to my router, and a working ipv6 connection to the internet. I can receive very large packets from sites on the internet, with sizes up to at least 10000 bytes (according to wireshark). (edit: turns out to be linux's 'generic receive offload') However, when trying to send anything, my local computer fragments at just below 1500 bytes for ipv6. (On ipv4, I can send tcp packets to the internet of at least 1514 bytes, I can ping with packets up to the configured mtu of 6128 but they are blackholed.) I'm on ubuntu 12.04. I have configured an mtu for my eth0 of 6128 (the maximum it accepts), both using ip link set dev eth0 mtu 6128 and in the NetworkManager applet gui, and restarted the connection. ip link show eth0 shows the 6128 mtu is indeed set. ip -6 route shows that none of the paths the kernel knows about have an mtu set. I can ping over ipv4 with packets up to 6128 bytes (though I don't get responses), but when I do ping6 myrouter -c3 -s1500 -Mdo I get error replies from my own computer saying that the packets are too large and the mtu is 1480. I have confirmed with Wireshark that nothing is put on the wire, and the replies are indeed generated by my own computer. So, how do I get my computer to use the larger mtu?

  Read the article

• Samsung S23A750D 23" 120Hz get no signal

  - by John Carter

  I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

  Read the article

• What is the default value for Empty Temporary Internet Files when browser is closed in IE8?

  - by schellack

  We have four different machines that all have "Empty Temporary Internet Files when browser is closed" set to true (checked) in IE8's Internet Options (located under the Security section in the Advanced tab). No one remembers checking that checkbox to turn on the setting. What is the default value supposed to be? I'm specifically interested in Windows 7 and Windows XP. I have run rsop.msc on one of the corporate machines—3 of the 4 are members of a corporate network/domain—and see this under User Configuration, which makes the current scenario seem even stranger: The Local Group Policy Editor (gpedit.msc) also shows the Configure Delete Browsing History on exit setting to be Not configured (under Computer ConfigurationAdministrative TemplatesWindows ComponentsInternet ExplorerDelete Browsing History).

  Read the article

• How can I remove all drivers and other files related to a USB Mass Storage device?

  - by Bob

  I have a flash drive here that does not work on one OS on computer - let's call it the desktop Windows 7. It works fine on another computer - laptop Windows 7. It also works fine on Windows 8 on the same desktop computer. Other flash drives work fine under desktop Windows 7. So not a hardware issue, not a generic USB Mass Storage driver issue. It's something specific to this drive. On desktop Windows 7, I can connect the drive but no volume comes up under Windows Explorer. Ditto for Disk Management. With diskpart, loading hangs until I unplug the drive, if I replug it and try list disk it hangs again. If I unplug the drive at this point, list disk prints out all attached drives - including the just removed flash drive. The drive consistently appears under Device Manager, but uninstalling the drivers, restarting and reinstalling the drivers (by inserting the drive) only works for the first insertion. After that it fails again. I get the feeling that the driver files are not actually removed, and are corrupted, meaning every reinstall it's the same corrupted drivers being installed. Is there any way to remove these drivers completely? Or perhaps some other setting Windows 7 retains? Formatting the drive through another computer/OS does not help. I've also tried a complete wipe and rebuild of the MBR and single partition. The allocation unit size makes no difference; neither does a NTFS format. This is a relatively small matter, and I would not like to reinstall the entire OS!

  Read the article

• What was your biggest waste of money, and what should you have bought instead? [closed]

  - by rob

  I waste a lot of money on computer equipment and other electronics that I don't really need. I've also bought software that I've never really used, or which as been replaced by better free software. As I'm buying things, it doesn't seem like much--fifty bucks here, a hundred dollars there. But when I go back and look at how much I've spent over my past few electronics purchases, I usually start to think of the other things I could have bought with that money instead. Most of the computer hardware and electronics don't usually improve my life by much, if at all. Case in point: back when I was in college, I prided myself on getting the best deals for computer hardware, but when I went back and added up all the money I had spent, I had probably wasted close to a thousand dollars on "cheap" $100 hard drives that eventually all went bad (including the warranty replacements). Even if they did still work, it would not be worth the effort to use them, because they're too small and too noisy by today's standards. I've also spent thousands more on other junk, such as RAM and CPU upgrades that only gave modest performance jumps, and wireless audio transmitters that I used for a short time to stream music from the now-defunct Yahoo! Music service. Every time I see a really great deal on RAM or video cards, I come one click away from buying them, but these days I'm usually able to resist. I've been wanting to get into woodworking ever since I moved into my house, and five years later I'm finally saving up for a $600 table saw. Sure, I've already got a toolbox and a couple of the essential power tools like a drill and a jigsaw, but I can't help but think that I'd have an entire shop full of woodworking tools and a lot of nice wood furniture if I hadn't wasted all that money back in college. What has been your biggest waste of money on computer stuff and technology? If you had all that money back, would you make the same mistake again and buy the same types of things, or would you spend it on something else?

  Read the article

• Reasons for missing IP info in `last` output on pts logins?

  - by Mike Pennington

  I have five CentOS 6 linux systems at work, and encountered a rather strange issue that only seems to happen with my userid across all the linux systems I have... This is an example of the problem from entries I excepted from the last command... mpenning pts/19 Fri Nov 16 10:32 - 10:35 (00:03) mpenning pts/17 Fri Nov 16 10:21 - 10:42 (00:21) bill pts/15 sol-bill.local Fri Nov 16 10:19 - 10:36 (00:16) mpenning pts/1 192.0.2.91 Fri Nov 16 10:17 - 10:49 (12+00:31) kkim14 pts/14 192.0.2.225 Thu Nov 15 18:02 - 15:17 (4+21:15) gduarte pts/10 192.0.2.135 Thu Nov 15 12:33 - 08:10 (11+19:36) gduarte pts/9 192.0.2.135 Thu Nov 15 12:31 - 08:10 (11+19:38) kkim14 pts/0 :0.0 Thu Nov 15 12:27 - 15:17 (5+02:49) gduarte pts/6 192.0.2.135 Thu Nov 15 11:44 - 08:10 (11+20:25) kkim14 pts/13 192.0.2.225 Thu Nov 15 09:56 - 15:17 (5+05:20) kkim14 pts/12 192.0.2.225 Thu Nov 15 08:28 - 15:17 (5+06:49) kkim14 pts/11 192.0.2.225 Thu Nov 15 08:26 - 15:17 (5+06:50) dspencer pts/8 192.0.2.130 Wed Nov 14 18:24 still logged in mpenning pts/18 alpha-console-1. Mon Nov 12 14:41 - 14:46 (00:04) You can see two of my pts login entries above that do not have a source IP address associated with them. My CentOS machines have as many as six other users that share the systems, but the mpenning userid is the only one that has this issue. Approximately 5% of my logins see this issue, but no other usernames exhibit this behavior. Questions Given the kind of scripts I keep on these systems (which control much of our network infrastructure), I'm a little spooked by this and would like to understand what would cause my logins to occasionally miss source addresses. Is there anything (other than malicious activity) that would reasonably explain the behavior? Other than bash history timestamping, are there other things I can do to track the issue down? Informational Since this started happening, I enabled bash history time-stamping (i.e. HISTTIMEFORMAT="%y-%m-%d %T " in .bash_profile) and also added a few other bash history hacks; however, that does not give clues to what happened during the previous occurrences. All the systems run CentOS 6.3... [mpenning@typo ~]$ uname -a Linux typo.local 2.6.32-279.9.1.el6.x86_64 #1 SMP Tue Sep 25 21:43:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux [mpenning@typo ~]$ EDIT If I use last -i mpenning, I see entries like this... mpenning pts/19 0.0.0.0 Fri Nov 16 10:32 - 10:35 (00:03) mpenning pts/17 0.0.0.0 Fri Nov 16 10:21 - 10:42 (00:21)

  Read the article

• script to list user's mapped drive not giving results or error

  - by user223631

  We are in the process of migrating two file servers to a new server. We have mapped drives via user group in group policy. Many users have manually mapped drives and we need to find these mappings. I have created a PowerShell script to run that remotely get the drive mappings. It works on most computers but there are many that are not returning results and I am not getting any error messages. Each workstation on the list creates a text file and the ones that are not returning results have no text in the files. I can ping these machines. If the machine is not turned on, it does come up error message that the RPC server is not available. My domain user account is in a group that is in the local admin account. I have no idea why some are not working. Here is the script. # Load list into variable, which will become an array of strings If( !(Test-Path C:\Scripts)) { New-Item C:\Scripts -ItemType directory } If( !(Test-Path C:\Scripts\Computers)) { New-Item C:\Scripts\Computers -ItemType directory } If( !(Test-Path C:\Scripts\Workstations.txt)) { "No Workstations found. Please enter a list of Workstations under Workstation.txt"; Return} If( !(Test-Path C:\Scripts\KnownMaps.txt)) { "No Mapping to check against. Please enter a list of Known Mappings under KnownMaps.txt"; Return} $computerlist = Get-Content C:\Scripts\Workstations.txt # Loop through each item in the array (each computer in the list of computers we loaded into the variable) ForEach ($computer in $computerlist) { $diskObject = Get-WmiObject Win32_MappedLogicalDisk -computerName $computer | Select Name,ProviderName | Out-File C:\Tester\Computers\$computer.txt -width 200 } Select-String -Path C:\Tester\Computers\*.txt -Pattern cmsfiles | Out-File C:\Tester\Drivemaps-all.txt $strings = Get-Content C:\Tester\KnownMaps.txt Select-String -Path C:\Tester\Drivemaps-all.txt -Pattern $strings -notmatch -simplematch | Out-File C:\Tester\Drivemaps-nonmatch.txt -Width 200 Select-String -Path C:\Tester\Drivemaps-all.txt -Pattern $strings -simplematch | Out-File C:\Tester\Drivemaps-match.txt -Width 200

  Read the article

• pfsense 2.0 traffic priority - set full priority for single host

  - by Waxhead

  I have a network with several computers all on the same network and since I have very limited bandwidth I would like to prioritize traffic almost like a CPU scheduler prioritize processes. Example: Computer A: Used for webstuff: YouTube, downloads, news, emails etc. Computer B: Transferring files over HTTP Computer C: Transferring files over ftp, rsync whatever What I would like to do is to give A up to for example 90% of the available bandwidth IF A requires it. The leftovers (10%) is divided between B and C (5% each if both is busy) If A is not utilizing all bandwidth then of course B and C should share the full bandwidth (50% each as long as both are maxing out their bandwidth). All computers are on the same network (192.168.1.0 - 192.168.1-10 for example). Appreciate if anyone could shed some light on how I should set up my network to achieve this. To be honest I actually need a step by step guide on how I should set this up. Network setup: (ADSL modem configured in bridge mode (1500kbps/300kbps)) [ADSL modem (bridge)]<-[pfsense2.0]<-[switch]<-[Computer A,B,C...etc]

  Read the article

• How do I search my mail and Office Communicator conversations from inside Outlook?

  - by Anthony Mastrean

  I am running Office Communicator 2007 R2 and Outlook 2010 on a Microsoft Exchange Server 2010. I am storing my conversation history from Communicator in Exchange in the default folder, "Conversation History". I'm using the conversation view in Outlook. And I have a Gmail-like macro to archive my conversations to an "Archive" folder. I want to search all my mail and conversations at once. By default, Outlook is searching in the current folder only. I tried creating a rule to move the conversations to my Archive folder, but couldn't configure it correctly.

  Read the article

• Dosbox USB print Windows 8.1 64Bit

  - by eCronik

  Worked fine until I've upgraded to Windows 8.1 as well as made the mail programm working (had to get a windows live ID and have to type in a password now, when starting Windows). I did set the USB printer to lpt1 on the local Windows 8 computer and another XP computer via LAN to lpt2 the same way with the same printer on the Windows 8 computer. But now it doesn't work anymore from the Win8 one (where the printer is plugged via USB). Tried already deleting lpt2: on the XP one, as well as lpt1 on the Windows 8, resetted it. Not working... :-( I tried also net use lpt1: \server\printer password "\user:Ute Berger" /persistent:yes of course with the correct server and shared printer name as well as net use \server\printer "\user:Ute Berger" password /persistent:yes . This is the name displayed as a user now. But in C:\users it is named Benutzer1. Tried this one also. Nothing worked. What could be the problem here? What's strange is that when I type "net use lpt1:" on the XP, I get another error (67 - The networkname wasn't found) than trying something I didn't set up like lpt2 (2 - The system can't find the file). Could this be a possible problem as even if deleted something is left blocking on the Windows 8 computer? Please help me - I tried for hours today but all I've got was frustration... Regards Tim

  Read the article

• VPN sharing on Mac OS X 10.5 machine

  - by Jens

  I have a rather weird problem. I want to share a VPN connection that has been established by my Mac OS X 10.5 computer with another machine in my network. This is what I did: In the /etc/hostcongig file on the main computer I added the line: IPFORWARDING=-YES- I assigned a fixed IP address to my computer (192.168.178.30), a fixed one to the other machine (192.168.178.60) and my computer's IP address as gateway on the other machine. I connected to my VPN using the internal Mac OS X VPN client (PPTP connection) I run this script: #!/bin/sh natd -same_ports -use_sockets -unregistered_only -dynamic -interface ppp0 -clamp_mss ipfw -f flush ipfw add divert natd ip from any to any via ppp0 ipfw add pass all from any to any sysctl -w net.inet.ip.forwarding=1 Source: Using (and sharing) a VPN connection on your Mac Now everthing works smootly, however speed is an issue. I get 1,8 MBit/s on my main machine and only 0,3 - 0,6 MBit/s on the other one. My question: What could possibly be wrong? Do I have to tweak MTU settings, is there any packet inspection ongoing that needs time....? Any help appreciated!

  Read the article

• How can I use my cell phone to establish a dial-up networking connection?

  - by gWiz

  I am using Windows 7 and have a BlackBerry with T-Mobile (U.S.). I have paired the phone with my computer over Bluetooth, which automatically creates a serial port for it. I am able to open the port in PuTTY and successfully issue AT commands to the modem, including dialing. However, while using Windows to create and establish a Dial-Up Networking connection, I get an error dialog stating "Error 678. The remote computer did not respond." In my testing, I also tried setting up a connection to dial a number connected to a phone. When attempting to connect over this connection, the phone does ring but the very moment I answer the call, my computer displays the above error dialog. What must be done to successfully establish such a PPP connection? Some special AT initialization string perhaps? To clarify, I'm not referring to the well-described and popular technique known as "tethering," in which the remote host of the data link is the mobile service provider. I am interested specifically in establishing direct data links with remote hosts other than my mobile service provider. Think old-school landline connection to your friend's computer or BBS. Edit 1 As grawity pointed out in comments, the missing piece of the puzzle is the actual modulator that is compatible with v-series protocols, which I expected to be built into the cellphone. So far the best only software alternative I could find is this experimental project. Edit 2 Found this forum discussion today. The participants state that there is no old-school modem in the BlackBerry. Edit 3 When I place a call in PuTTY with ATD, immediately after the call is answered (and the callee is initiating the handshake) the cellphone returns OK. This is not the expected behavior for establishing a data connection. The phone should reciprocate the handshake, and upon success return CONNECT. (Alternatively it should return BUSY or NO CARRIER, but never simply OK.) Windows DUN must be interpreting this as the "Error 678" I was seeing.

  Read the article

• Proper end of day sequence to maintain monitor config

  - by WarmBeer

  I've got an HP EliteBook 6930p that travels from home, where it is connected to individual cables, and work where there is a docking station. At both locations I have an external monitor as the secondary monitor and like to have the laptop screen as the primary, i.e. with the task bar. At the end of the day I close the laptop, which is supposed to set it to standby. When I get home I plug in the power cord and the external monitor cord and open the computer. When heading into work I close the computer and unplug everything. Inevitably when I open the computer at the new location the monitors are reversed, i.e. the primary, task bar display is on the external monitor and the laptop shows the secondary, even though when i click identify the laptop has the 1. I then have to disable the secondary display, switch the primary to the laptop and re-enable the secondary. I've tried locking the computer before closing and occasionally that works to keep the setup in place but not always. Any suggestions for how to keep the config in place during transport? ed

  Read the article

• PhpMyAdmin Hangs On MySQL Error

  - by user75228

  I'm currently running PhpMyAdmin 4.0.10 (the latest version supporting PHP 4.2.X) on my Amazon EC2 connecting to a MySQL database on RDS. Everything works perfectly fine except actions that return a mysql error message. Whether I perform "any" kind of action that will return a mysql error, Phpmyadmin will hang with the yellow "Loading" box forever without displaying anything. For example, if I perform the following command in MySQL CLI : select * from 123; It instantly returns the following error : ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '123' at line 1 which is completely normal because table 123 doesn't exist. However, if I execute the exact same command in the "SQL" box in Phpmyadmin, after I click "Go" it'll display "Loading" and stops there forever. Has anyone ever encountered this kind of issue with Phpmyadmin? Is this a bug or I have something wrong with my config.inc.php? Any help would be much appreciated. I also noticed these error messages in my apache error logs : /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open Below are my config.inc.php settings : <?php /* vim: set expandtab sw=4 ts=4 sts=4: */ /** * phpMyAdmin sample configuration, you can use it as base for * manual configuration. For easier setup you can use setup/ * * All directives are explained in documentation in the doc/ folder * or at <http://docs.phpmyadmin.net/>. * * @package PhpMyAdmin */ /* * This is needed for cookie based authentication to encrypt password in * cookie */ $cfg['blowfish_secret'] = 'something_random'; /* YOU MUST FILL IN THIS FOR COOKIE AUTH! */ /* * Servers configuration */ $i = 0; /* * First server */ $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'cookie'; /* Server parameters */ $cfg['Servers'][$i]['host'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = true; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['LoginCookieValidity'] = '3600'; /* * phpMyAdmin configuration storage settings. */ /* User used to manipulate with storage */ $cfg['Servers'][$i]['controlhost'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['controluser'] = 'pma'; $cfg['Servers'][$i]['controlpass'] = 'password'; /* Storage database and tables */ $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin'; $cfg['Servers'][$i]['bookmarktable'] = 'pma__bookmark'; $cfg['Servers'][$i]['relation'] = 'pma__relation'; $cfg['Servers'][$i]['table_info'] = 'pma__table_info'; $cfg['Servers'][$i]['table_coords'] = 'pma__table_coords'; $cfg['Servers'][$i]['pdf_pages'] = 'pma__pdf_pages'; $cfg['Servers'][$i]['column_info'] = 'pma__column_info'; $cfg['Servers'][$i]['history'] = 'pma__history'; $cfg['Servers'][$i]['table_uiprefs'] = 'pma__table_uiprefs'; $cfg['Servers'][$i]['tracking'] = 'pma__tracking'; $cfg['Servers'][$i]['designer_coords'] = 'pma__designer_coords'; $cfg['Servers'][$i]['userconfig'] = 'pma__userconfig'; $cfg['Servers'][$i]['recent'] = 'pma__recent'; /* Contrib / Swekey authentication */ // $cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey-pma.conf'; /* * End of servers configuration */ /* * Directories for saving/loading files from server */ $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; /** * Defines whether a user should be displayed a "show all (records)" * button in browse mode or not. * default = false */ //$cfg['ShowAll'] = true; /** * Number of rows displayed when browsing a result set. If the result * set contains more rows, "Previous" and "Next". * default = 30 */ $cfg['MaxRows'] = 50; /** * disallow editing of binary fields * valid values are: * false allow editing * 'blob' allow editing except for BLOB fields * 'noblob' disallow editing except for BLOB fields * 'all' disallow editing * default = blob */ //$cfg['ProtectBinary'] = 'false'; /** * Default language to use, if not browser-defined or user-defined * (you find all languages in the locale folder) * uncomment the desired line: * default = 'en' */ //$cfg['DefaultLang'] = 'en'; //$cfg['DefaultLang'] = 'de'; /** * default display direction (horizontal|vertical|horizontalflipped) */ //$cfg['DefaultDisplay'] = 'vertical'; /** * How many columns should be used for table display of a database? * (a value larger than 1 results in some information being hidden) * default = 1 */ //$cfg['PropertiesNumColumns'] = 2; /** * Set to true if you want DB-based query history.If false, this utilizes * JS-routines to display query history (lost by window close) * * This requires configuration storage enabled, see above. * default = false */ //$cfg['QueryHistoryDB'] = true; /** * When using DB-based query history, how many entries should be kept? * * default = 25 */ //$cfg['QueryHistoryMax'] = 100; /* * You can find more configuration options in the documentation * in the doc/ folder or at <http://docs.phpmyadmin.net/>. */ ?>

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >