Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 157/468 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

  - by gojira

  I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

  Read the article

• Local IP address same as Google's external

  - by GRIGORE-TURBODISEL

  I'm exampling Google's IPs, but you get the idea. What happens if somebody configures a router's LAN address pool to range from 62.231.75.2 to 62.231.75.255, then his computer's IP address to 62.231.75.232 and someone else on the network tries to access Google? Or better off, is there any case in which someone in that network can, by merely attempting to access Google, accidentally bump into another computer on the network?

  Read the article

• How can I run a game server on a computer behind a NAT, if I have another computer not behind a NAT?

  - by Macha

  My home connection is part of a large NAT, outside my control. Inside my home, my router has a NAT, under my control. I control a public facing Linux VPS with one IP address, outside my home network. Ideally, what I'd like to do is set something up so that I connect my home computer to my VPS, and after that port X on my VPS leads to port Y on my home computer, for the purposes of running a game server of a game that does not run under Linux. Is this possible?

  Read the article

• Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

  - by Dennis Wurster

  My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

  Read the article

• Routers with USB plug to connect external storage

  - by sixtyfootersdude

  I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

  Read the article

• Cannot save properly the source of .html file containing Russian letters as .txt

  - by brilliant

  When I save the source of this page of a Russian website: http://www.mail.ru/ as a .txt file, all Russian letters turn into Chinese characters (I am working on a Chinese computer at the moment), but when I save another page of another Russian website: http://starling.rinet.ru/cgi-bin/response.cgi?root=/usr/local/share/starling/morpho&morpho=0&basename=\usr\local\share\starling\morpho\ozhegov\ozhegov&first=4001 also as a .txt file, all Russian letters are saved in it as the are. Why is it so?

  Read the article

• Trouble in Team Viewer VPN Connection

  - by Sumit Pal

  I have completed initial vpn connection setup. It has connected. I have tested with ping and it is ok. My problem is, when I want to start file transfer in VPN it asks for username & password. So what is the user name? I have tried giving Computer-Name/User-Name. I have found my Computer Name by going to Control Panel/System/ & clicking 'Computer Name' tab & username from user accounts or it is shown when I login in windows account (Please correct me if the above procedure is wrong). But what is the password? I have tried giving the account password but it always give 'The username or password is incorrect.' My Question: How to find the username & password? For Information: a) I have Team Viewer 7 installed in one Windows XP PC & one Windows 8 PC. I like to create a secure connection between these two PCs. b) The two PCs are connected in the same local network via a router. Please ask if you need additional information.

  Read the article

• Alfa AWUSO36H 1W dysfunctional driver

  - by BrainStorm

  I recently purchased an Alfa AWUSO36H 1W wireless USB adapter for my notebook, in order to improve signal strength and quality. I'm currently using Linux Mint 11, and the it uses the RTL8187 driver for this adapter, I'm also using a 4dbi antenna, though I have others. The problem is that this adapter does exactly the opposite of what it should, actually my internal Broadcom BCM4313 adapter works way better than the alfa. Browsing is slow, some network applications don't even work, pings against Google.com on the internal adapter runs smooth, while in the alfa it gets like 25% packets lost or more! I'm less them 50 feet from my AP, the internal adapter gets 44/70 link quality, and the alfa gets around 60/70 (iwconfig output). Also the system always sets alfa power to 20dbm(100mw), then I have to do sudo iw set reg B0 to make it 30dbm(1000mw), but apparently no significant change. I've installed wireless-compat drivers, no change either. And worst of all, in Windows 7 it works way more smoothly for browsing, though I couldn't test it properly there. I hope its a driver problem, even if it's a pain to find/compile Linux drivers for a starter, I prefer it to a hardware problem where I would need to buy another adapter, since I have no money left (except for the cantenna pieces).

  Read the article

• IP Address vs MAC addresses

  - by Codenotguru

  why do we need ip addresses if mac address is enough to identify the machine???

  Read the article

• Assign a secondary IP address to a Windows machine using DHCP

  - by IndigoFire

  Is it possible to configure dhcpd (on a Linux box) to assign a Windows PC 2 separate IP configurations? Right now I've configured the two IP addresses manually and it does exactly what's needed, but I can't figure out how to achieve the same thing with DHCP. For example, is it possible to set up a virtual interface that piggy-backs onto the first interface and gets its own configuration? Alternatively, is it possible to run a script upon getting IP values from DHCP that would then be able to configure the secondary IP?

  Read the article

• How can I send super large files directly to another computer in the Internet for free?

  - by Cruise

  I regulary need to transfer very large files (30 GB) to my friend - financial statistics. I don't have any problem with bandwidth: it is very broad here. I did some research in the area, so: 1. I would not use FTP, as it is very tricky to get it working behind a NAT. 2. I would not use Skype/MSN/ICQ, as it is not designed for file transfer and it underperforms on the huge files. 3. I would not use file-sharing services, as I need to pay for big files (30 GB is a problem here) and I don't like holding any piece of my data on the third-party server. So, I need some smart tool that will do what I need: sending files directly browser-to-browser and not browser-server-browser. Is it so complex? Is there some web application in the Internet that can do this?

  Read the article

• Flow of packets in network

  - by user58859

  I can't visualize in my mind the network traffic flow. eg. If there are 15 pc's in a LAN When packet goes from router to local LAN, do it passes all the computers? Does it go to the ethernet card of every computer and those computers accept the packet based on their physical address? To which pc the packet will go first? To the nearest to the router? What happens if that first pc captures that packet(though it is not for it)? What happens when a pc broadcast a message? Do it have to generate 14 packets for all the pc's or only one packet reach to all pc's? If it is one packet and captured by first pc, how other pc's can get that? I can't imagine how this traffic is exactly flows? May be my analogy is completely wrong. Can anybody explain me this?

  Read the article

• SQUID Transparent SSL proxy (no intercept)

  - by user974896

  I know how to have squid work as a transparent proxy. You put it into transparent mode then use your router or IPTABLES to forward port 80 to the squid port. I would like to do the same for SSL. Every guide I see mentions setting up keys on the squid server. I do not want squid to actually decrypt the SSL traffic then establish a connection with the server, rather I would like squid to simply forward the SSL traffic as is. The only thing I would like to do is be able to check the SSL request for any offending IPs and drop the packets if the destination is one of them.

  Read the article

• Why is my iPhone WIFI so slow at home?

  - by John Fouhy

  When my iPhone is connected to my home wireless network, the internet is unusably slow. I installed the speedtest.net application; here are some results from tonight: Down: 0.0kB/s, Up: 0.0kB/s, ping: 2230ms Down: 2.5kB/s, Up: 40.5kB/s, ping: 2182ms Down: 0.0kB/s, Up: 20.0kB/s, ping: 197ms For comparison, here is the result from my iMac to the same server, which is on the same wireless network (and has no wired connection): Down: 139kB/s, Up: 53.8kB/s, ping: 182ms Neither my iMac nor the Dell laptop also on the network have experienced the wifi problems I get with my iPhone. On the other hand, I tried browsing a website on the wireless network at work with no problems. EDIT: SpeedTest at work gives me 156kB/s down. EDIT2: Girlfriend (owner of the Dell) reports actually the internet is sometimes very slow. Perhaps there is more going on. No problems with my iMac. My router is a ASUS WL-500g Premium V2 running OpenWrt Kamikaze with X-Wrt Extensions 8.09.

  Read the article

• Snow Leopard takes a long time to connect to Windows/Samba server

  - by hood

  We run a very heterogeneous network here: There is some XP, Vista, 7, Leopard, Snow Leopard clients, and Windows 2003 (one remaining legacy app), 2008, and Linux servers. The main file server runs Ubuntu Linux and has been added to the Windows Domain and has been used for many years; SBS 2008 is the PDC (the 2003 and 2008 are on the domain also). In Leopard there were no problems at all authenticating to the file servers. We've upgraded one of the Leopard iMacs to Snow Leopard, though the same problem occurs in a new MBP which came with the newer OS as well as a clean install on another iMac. It does not matter whether connected through wired or wireless. In the Finder when clicking on the server - whether on first boot or after it is connected - it will display "Connecting..." for up to a few minutes before either generally working (if username/password in keychain) or displaying "Connection Failed" - at which time clicking "Connect As" and typing in the username/password will take some more time and eventually work. Sometimes it will display "Connecting..." indefinitely. (I've left it as long as 15 minutes before trying something else) Accessing shares on the the 2003 and SBS servers have the problem (so I don't think it's a Samba server issue). The Server 2008 Standard is connecting instantly at the moment. Accessing the share through an alias/stacks doesn't have this problem. Leopard and Windows clients still have no problem. I've searched Google but hasn't yielded any working result. How do I get rid of this delay?

  Read the article

• Turning off the wi-fi functionality of a Netgear WNR2000

  - by indyK1ng

  Hello all, So my school has set up a ton of wireless access points and now they want me to turn off the wireless functionality of my router. I have a Netgear WNR2000 and I can't find the option to turn off the wireless. Thank you for your help

  Read the article

• How do I map a network drive in Ubuntu? I want to save my Firefox downloads directly in the mapped n

  - by NJTechie

  I work in an environment wherein files are exchanged over email which are then processed into databases. In Windows, mapping a network drive and storing files directly to a folder in the network drive from Firefox/Chrome downloads is a breeze. How to achieve the same in Ubuntu? I don't see the SFTP'ed drive/directory as options in Firefox- Downloads setup. Thanks in advance!

  Read the article

• How do I map a network drive in Ubuntu? I want to save my Firefox downloads directly in the mapped n

  - by NJTechie

  I work in an environment wherein files are exchanged over email which are then processed into databases. In Windows, mapping a network drive and storing files directly to a folder in the network drive from Firefox/Chrome downloads is a breeze. How to achieve the same in Ubuntu? I don't see the SFTP'ed drive/directory as options in Firefox- Downloads setup. Thanks in advance!

  Read the article

• Do I need a Gigabit router with a 24Mbps down and 7Mbps upload speed cable modem?

  - by djangofan

  Do I need a Gigabit port capable wireless router with a 24Mbps down and 7Mbps upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 Mbps port can easily handle it. Is that true?

  Read the article

• Capabilities of business and SOHO routers

  - by Q8Y

  I'm currently studying for the CCNA certifications (especially for Cisco routers and configuration). I know that business routers provide more features than SOHO routers, the processing speed and RAM can be enough. Assume I need to connect a number of users through a network (accessing internet, share files, printers, ...). I have a high speed connection to the internet and I already applied QoS. How can I find out how many users such a single (SOHO) router could handle? In my case I'd attach to it multiple switches until I have the number of ports needed. Would everything work well and smoothly with 50 users? What about 300? At which point would I need a business router instead? If I implemented VLAN here, would it make any difference in the performance? When do I really need to use more than one router? (Both SOHO and business) I'm thinking that I may need them only if I want to increase the performance (instead of replacing the existing one) and if I have multiple locations, so in this situation I need to have multiple routers, right? Put differently: Is there is a need to have another router if my business all in one place?

  Read the article

• How can I change the binding order of network adapters in Windows 7?

  - by Chris Farmer

  The end goal here is that I am trying to install an Oracle 10g server on my Windows 7 x64 dev box. I use DHCP, and the Oracle installer is throwing up this warning: Checking Network Configuration requirements ... Check complete. The overall result of this check is: Failed <<<< Problem: The install has detected that the primary IP address of the system is DHCP-assigned. Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP. I have installed the loopback adapter, but I am not sure how to make it the primary network adapter. I see this Microsoft KB article on the subject but it's Windows XP-oriented, and I can't seem to find a comparable one for Windows 7. Some of the options it talks about don't seem to be present in the views of the adapters that I see. So, how can I make the loopback adapter become the primary adapter?

  Read the article

• How can I control wireless networks in Ubuntu without Network-Manager?

  - by Solignis

  Hi there, I recently installed Ubuntu on a laptop I got. I was having issues with the network manager just like I was having in my VM where it was not setting up the hostname correctly. Anyhow now I have a problem, since it is a laptop it will be moving.... But I have no way to discover new wireless networks. Anyway I can gain that functionality back? The problem I am running into is that I need to set the DNS search and domain for the machine so I can access my network but the network-manager was overriding the settings. Any help would be much appreciated.

  Read the article

• How to access an node of an LAN via WAN?

  - by gilzero

  Lets say I have a router that is connected to the Internet. An WAN IP address is given by ISP. It is using PPPoE ADSL, the IP address is not static, every time it connected, assigned a different IP address. There is an web server 192.168.0.100 running in the LAN. I heard something like DMZ + DynDNS can do the job? But not sure what these are and how they work. Any there way(s) to access the local node 192.168.0.100 via WAN, so that I can reach that node even I am not home. Thanks for any advice.

  Read the article

• Mount linux partition as Windows network share over internet

  - by CptEO

  I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

  Read the article

• Wi-fi signal with keeping the internet cable

  - by daGrevis

  So the situation is that I have Ethernet cable which provides internet to my computer. Thing I want is to have wi-fi connection in my house and Ethernet cable (like I have before) to use for my PC. I will use wi-fi for my laptop and mobile phone. I think I need router for that and I'm looking at Asus RT-N16 (suggested in Coding Horror) for it, but I am not sure. Is it the right thing for me and I will be able to get wi-fi signal and keep the Ethernet cable? I guess the system will be that current cable goes into router, router provides wi-fi signal and gives back new cable... or something like that. Thanks in any advice! And sorry if topic isn't in right site.

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >