Search Results

Search found 4707 results on 189 pages for 'wireless designs'.

Page 157/189 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• modprobe ndiswrapper - not found

  - by David

  I'm trying to use ndiswrapper on a Slackware 12 (I think) box, but I'm running into a problem with modprobe. Everything I find online says that it should be working, but for some unknown reason it isn't. Here's what I've done so far: Installed ndiswrapper (latest tarball, make, make install) Ran ndiswrapper -i on the WinXP driver for my USB wireless card Ran ndiswrapper -l which tells me the driver is present and the device is present (lsusb also confirms the device is present) Ran ndiswrapper -m which put an alias for wlan0 in /etc/modprobe.d/ndiswrapper.conf Ran depmod -a Ran modprobe ndiswrapper which tells me "FATAL: module ndiswrapper not found" Ran modprobe -l which shows no listing for ndiswrapper I even tossed in a reboot or two while trying various combinations of the above, still nothing. So naturally ifconfig wlan0 up isn't working because the device isn't being created, presumably because the module isn't loading the driver. Does anybody have any suggestions? Everything points to the notion that this should work fine, but modprobe just isn't able to find what it needs. Have I missed an important step?

  Read the article

• How do I setup a Gnome 3.2 VPN connection (Fedora 16)

  - by mpeters

  I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

  Read the article

• DIR-615 lose internet connection after 3 minutes

  - by Sirber

  I got a new DLink DIR-615 routeur. DSL model connects fine. Connected PCs connects to the internet fine (wireless, wired) fine too. After ~3 minutes, connected PCs cannot go to the internet. Web pages goes timeout, sometimes google talk stays on (working). From the router admin page, pings works correctly (on google.ca), so the connection is active. pc -- routeur -- internet: fail pc -- router: ok router -- internet: ok could it be firewall related? I've read there's a SPI firewall enabled.

  Read the article

• DIR-615 lose internet connection after 3 minutes

  - by user31375

  I got a new DLink DIR-615 routeur. DSL model connects fine. Connected PCs connects to the internet fine (wireless, wired) fine too. After ~3 minutes, connected PCs cannot go to the internet. Web pages goes timeout, sometimes google talk stays on (working). From the router admin page, pings works correctly (on google.ca), so the connection is active. pc -- routeur -- internet: fail pc -- router: ok router -- internet: ok could it be firewall related? I've read there's a SPI firewall enabled.

  Read the article

• setting up a private network using linksys router

  - by user287745

  scenerio:- a database server running sql server 2005 and sql server management studio 2005 express editions a web server running IIS 5.0v using windows xp pro. two other computer having windows xp and windows 98 i have a linksys router which i use to access point for wireless (laptop) there are 5 sockets behind it four for clients and one for internet. i would like to setup a LAN- something like a private hosting area with two clients. would should i do? where to connect what and what would the changes in settnigs be. right now it uses dhcp or something to assign ips. where will the webserver be attached to the internet socket? where will the db server be attached? any guide, links, help thank you

  Read the article

• table design for storing large number of rows

  - by hyperboreean

  I am trying to store in a postgresql database some unique identifiers along with the site they have been seen on. I can't really decide which of the following 3 option to choose in order to be faster and easy maintainable. The table would have to provide the following information: the unique identifier which unfortunately it's text the sites on which that unique identifier has been seen The amount of data that would have to hold is rather large: there are around 22 millions unique identifiers that I know of. So I thought about the following designs of the table: id - integer identifier - text seen_on_site - an integer, foreign key to a sites table This approach would require around 22 mil multiplied by the number of sites. id - integer identifier - text seen_on_site_1 - boolean seen_on_site_2 - boolean ............ seen_on_site_n - boolean Hopefully the number of sites won't go past 10. This would require only the number of unique identifiers that I know of, that is around 20 millions, but it would make it hard to work with it from an ORM perspective. one table that would store only unique identifiers, like in: id - integer unique_identifier - text, one table that would store only sites, like in: id - integer site - text and one many to many relation, like: id - integer, unique_id - integer (fk to the table storing identifiers) site_id - integer (fk to sites table) another approach would be to have a table that stores unique identifiers for each site So, which one seems like a better approach to take on the long run?

  Read the article

• Why ping another inet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless. Accessing the router itself (admin UI) is without issues, no delay whatsoever. But when I try to access a service on another computer in the network the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine turning off firewall on the target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• Is it possible to use the bluetooth adapter from my logitech keyboard to connect headset?

  - by King Chan

  So, as titled. I have a bluetooth wireless keyboard that goes with the bluetooth adapter from Logitech 2 years ago. Recently I just brought a bluetooth headset from other company, but I wonder if I can reuse the bluetooth adapter from Logitech to use the headset? I don't seems to find an option in my control panel that allows me to add the headset device.... Or the blue adapter that comes with Logitech is only able to connect to the logitech keyboard? In that case, if I buy a bluetooth adapter, will it possible to share 1 bluetooth adapter with two device? (1 to 2? not 1 to 1?)

  Read the article

• Why does my webpage look different when I connect using different routers?! Does routers cache files?

  - by Ayyash

  Here is the case, I am working on a site from office and home, I recently updated the stylesheets and logged in the live site from office (using my same laptop I use all the time), and everything looks okay, I come home use my home internet connection to connect to the site using the SAME laptop, the styles are not updated! The thing is: this happens on ALL browsers, and after emptying the cache many times, and even after one month of work, and even if I have never opened the site before on that browser (as if my router has a cache of its own) Another thing: only one particular styles.css file seem to be hanging Extra info: I use the same IP for my home wireless router as that defined in the office, the usual 192.168.0.1

  Read the article

• Routers with USB plug to connect external storage

  - by sixtyfootersdude

  I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

  Read the article

• Server 2008 Active directory file sharing Restriction

  - by Usman

  My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

  Read the article

• bat file to disable ethernet adaptor and then reenable it after windows log in

  - by jaslr

  When I log into Windows 7 I need to wait 10 seconds and then disable the Local Area Connection (ethernet adaptor) and then reenable it. I have looked through the suggested answer: Enable/disable wireless interface in a bat file but that seems irrelevant as it just toggles the current state. From what I can tell I need to include: netsh interface set interface "Local Area Connection" DISABLED netsh interface set interface "Local Area Connection" ENABLED but I'm unsure of the wait time or how I can have this start after Windows has successfully logged in. What's the best approach here?

  Read the article

• Connecting to Aerohive AP's from Laptops running Win. 7 using authentication from a Windows 2008 domain server

  - by user264116

  I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect

  - by Goober

  I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• RDP locks up login, doesn't unlock on Windows

  - by private_meta

  From time to time, my system, when I try to login TRHOUGH or AFTER a remote connection, locks up the login session. I can't login anymore, the screen turns black (the monitor is still active, the image is black). Especially in the recent case, the system did not come back from the lock-up, and I had to reset the computer. Any idea what might be the issue here? More information: Both Computers are Windows 7, The RDP Server has a wired connection, the Client has either Wireless or Wired. The network card involved on the server is a "Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)" card built-in on an ASRock Mainboard. I'm using either local LAN or internet connection through NAT/Router.

  Read the article

• Why are my downloads up to ~1500KByte/sec only, when the ADSL connection locks at 13611Kbit/s?

  - by leladax

  No uploading is going on other than the overhead of downloading which appears to be not high for the abilities of the connection: Only about 30-40KByte/s when the router locks at 1012Kb/s and other direct uploads or uploading overheads can reach more than 100KByte/sec so I don't think it's a congestion at uploading that is doing it. Is there something I miss? Because I assume 13611Kbit/s should be ~1701Kbyte/sec. Is it an overheard at the ADSL level I don't understand? Could it be the ISP doing it? If it's active throttling it can't be on single connections since 2 high speed connections still go up to ~1500KByte/sec. It's not an example on torrents or other complex situations. The tests were on Ethernet, but I doubt the results would be different on wireless. I wonder if the settings of those connections at my end could be doing it, e.g. MTU settings, though I haven't touched the defaults of a common Realtek NIC.

  Read the article

• Laptop is super slow on network

  - by Gary

  So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

  Read the article

• Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

  - by benwebdev

  I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

  Read the article

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

• Is there a USB ethernet (wired) adapter that is really compatible with Windows 7 64-bit?

  - by nbolton

  I've checked the Windows 7 compatibility site, and it lists a fair few USB ethernet (wired, not wireless) adapters that should work with Windows 7 64-bit. However, whenever I Google for the model number and Windows 7 64-bit, there's many forum posts claiming that the devices actually don't work with 64-bit (but do work with 32-bit). I've actually also found this with the LUPO USB ethernet adapter; works with 32-bit win7, but not 64-bit (no drivers available). So is there anyone out there who is 100% certain, and have actually used successfully, a 64-bit win7 capable USB ethernet adapter?

  Read the article

• Inbound connections using Internet Connection Sharing in Apple/Mac/Leopard

  - by tlianza

  I have a Mac mini which I'm using to give some other devices wireless access, by sharing it's Airport connection with the local ethernet, and that is plugged into a switch. All devices can get online no problem. (See how: http://www.macosxhints.com/article.php?story=20041112101646643 and http://www.macosxhints.com/article.php?story=20071223001432304 ) The issue is that I need to be able to connect in to these machines as well (at least, for the Slingbox to work). All the devices have 192.168.2.* addresses, and the rest of my local network is on 192.168.1.*. I tried setting a static route so that the 192.168.2.* addresses would use a gateway of 192.168.1.50 (my mac mini's address) but that didn't seem to help. Does anyone know if what I'm trying to do is possible? I admit I'm not certain what Internet Connection sharing is really doing under the hood... perhaps it just does basic nat, and doesn't do the type of routing I'm looking for. If so, anyone know if this is possible?

  Read the article

• sybase - values from one table that aren't on another, on opposite ends of a 3-table join

  - by Lazy Bob

  Hypothetical situation: I work for a custom sign-making company, and some of our clients have submitted more sign designs than they're currently using. I want to know what signs have never been used. 3 tables involved: table A - signs for a company sign_pk(unique) | company_pk | sign_description 1 --------------------1 ---------------- small 2 --------------------1 ---------------- large 3 --------------------2 ---------------- medium 4 --------------------2 ---------------- jumbo 5 --------------------3 ---------------- banner table B - company locations company_pk | company_location(unique) 1 ------|------ 987 1 ------|------ 876 2 ------|------ 456 2 ------|------ 123 table C - signs at locations (it's a bit of a stretch, but each row can have 2 signs, and it's a one to many relationship from company location to signs at locations) company_location | front_sign | back_sign 987 ------------ 1 ------------ 2 987 ------------ 2 ------------ 1 876 ------------ 2 ------------ 1 456 ------------ 3 ------------ 4 123 ------------ 4 ------------ 3 So, a.company_pk = b.company_pk and b.company_location = c.company_location. What I want to try and find is how to query and get back that sign_pk 5 isn't at any location. Querying each sign_pk against all of the front_sign and back_sign values is a little impractical, since all the tables have millions of rows. Table a is indexed on sign_pk and company_pk, table b on both fields, and table c only on company locations. The way I'm trying to write it is along the lines of "each sign belongs to a company, so find the signs that are not the front or back sign at any of the locations that belong to the company tied to that sign." My original plan was: Select a.sign_pk from a, b, c where a.company_pk = b.company_pk and b.company_location = c.company_location and a.sign_pk *= c.front_sign group by a.sign_pk having count(c.front_sign) = 0 just to do the front sign, and then repeat for the back, but that won't run because c is an inner member of an outer join, and also in an inner join. This whole thing is fairly convoluted, but if anyone can make sense of it, I'll be your best friend.

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• Why isn't my submit button centered?

  - by William

  For some reason my submit button isn't centered. http://prime.programming-designs.com/test_forum/viewboard.php?board=0 #submitbutton{ margin: auto; border: 1px solid #DBFEF8; background-color: #DBFEF8; color: #000000; margin-top: 5px; width: 100px; height: 20px; } here's the html. <form method=post action=add_thread.php?board=<?php echo''.$board.''; ?>> <div id="formdiv"> <div class="fieldtext1">Name</div> <div class="fieldtext1">Trip</div> <input type="text" name=name size=25 /> <input type="text" name=trip size=25 /> <div class="fieldtext2">Comment</div> <textarea name=post rows="4" cols="70"></textarea> <div class="fieldtext2">Fortune</div> <input type="checkbox" name="fortune" value="fortune" /> </div> <input type=submit value="Submit" id="submitbutton"> </form>

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >