Search Results

Search found 46352 results on 1855 pages for 'super nathan'.

Page 158/1855 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

  • Windows 7 x64 blue screen of death

    - by emmettnicholas
    I've been running Windows 7 Ultimate x64 on my HP EliteBook 8530w for a few months now, and during that time, it has blue-screen-of-deathed 3 times. This time, I was able to snap a pic with my cellphone before it automatically rebooted: Any idea what might be causing this? Thanks! EDIT: I ran BlueScreenView, which showed 6 crahes: Bug Check String Caused By Driver ---------------- ---------------- IRQL_NOT_LESS_OR_EQUAL hal.dll DRIVER_POWER_STATE_FAILURE ntsokrnl.exe DRIVER_POWER_STATE_FAILURE ntsokrnl.exe BAD_POOL_CALLER NETw5s64.sys SYSTEM_SERVICE_EXCEPTION ntsokrnl.exe DRIVER_POWER_STATE_FAILURE ntsokrnl.exe

    Read the article

  • What’s the Minimum System Spec Recommended For Developer Laptop

    - by DaveDev
    I'll be regularly running Visual Studio 2010 Professional, SQLServer Express, Office and at least 1 virtual environment running a Linux Distro. I want the machine to be snappy and responsive even when doing a reasonable amount of Development work. I want to spend what it takes for this, but I don't want to go overboard spending more than I need to. I won't be playing many games or graphics processing so i won't need a monster of a machine. Any recommendations?

    Read the article

  • Setting default path in Unix

    - by eSKay
    I just installed valgrind on my Fedora12 machine. $ valgrind // 1 $ valgrind: Command not found. //error $ /usr/local/bin/valgrind // 2 works fine My $PATH has /usr/local/bin in it. Is there something else that I need to do to make 1 work?

    Read the article

  • Move Emails Easily Using Search - Outlook 2011 Feature on the MAC for Outlook 2010 Windows

    - by Arthor
    My main email client is Outlook 2010 for Windows 7. I also have a Mac but I do not use it that much however on the MAC you have Outlook 2011. In my Outlook 2010 for Windows 7, I have many many folders. There is one feature I would like to know if it is available or something similar which is on Outlook 2011 for the Mac. On the Outlook 2011 for the mac you can go to: Top Menu Message Move Choose Folder or press (SHIT+CMD "press" M) This bring up a box where you can just type the beginning part of the folder and all the folders with that beginning appears (To search), you select the one you want and the selected emails move to that folder. I hope I have explained it well. Does anyone know if there is a plugin on Outlook 2010 or may I have just missed the function. Thank you

    Read the article

  • Windows 7 won't recognize backup set can I script extracting the files in some other way?

    - by datatoo
    The Windows 7 Backup/Restore created multiple backup sets and I was able to restore the oldest version, but not the most recent, which is not seen by the application. I do see all of the zip files and there are hundreds in later versions. Is there a way to extract each of these correctly outside of the regular restoration method? Perhaps scripting an extract of each day one after another? further clarifying The backup files were all made to an external drive. The original computer died completely, power supply, drives everything. I am trying to reconstruct as much as possible and the only backup set recognized is 6 months older. This was recovered over a new install, but unzipping thousands of zip files is not really a simple unzip copy project as the original paths are not a simple thing to reconstruct.

    Read the article

  • Automating the choice between JPEG and PNG with a script

    - by MHC
    Choosing the right format to save your images in is crucial for preserving image quality and reducing artifacts. Different formats follow different compression methods and come with their own set of advantages and disadvantages. JPG, for instance is suited for real life photographs that are rich in color gradients. The lossless PNG, on the other hand, is far superior when it comes to schematic figures: Picking the right format can be a chore when working with a large number of files. That's why I would love to find a way to automate it. A little bit of background on my particular use case: I am working on a number of handouts for a series of lectures at my unversity. The handouts are rich in figures, which I have to extract from PDF-formatted slides. Extracting these images gives me lossless PNGs, which are needlessly large at times. Converting these particular files to JPEG can reduce their size to up to less than 20% of their original file size, while maintaining the same quality. This is important as working with hundreds of large images in word processors is pretty crash-prone. Batch converting all extracted PNGs to JPEGs is not an option I am willing to follow, as many if not most images are better suited to be formatted as PNGs. Converting these would result in insignificant size reductions and sometimes even increases in filesize - that's at least what my test runs showed. What we can take from this is that file size after compression can serve as an indicator on what format is suited best for a particular image. It's not a particularly accurate predictor, but works well enough. So why not use it in form of a script: I included inotifywait because I would prefer for the script be executed automatically as soon as I drag an extracted image into a folder. This is a simpler version of the script that I've been using for the last couple of weeks: #!/bin/bash inotifywait -m --format "%w%f" --exclude '.jpg' -r -e create -e moved_to --fromfile '/home/MHC/.scripts/Workflow/Conversion/include_inotifywait' | while read file; do mogrify -format jpg -quality 92 "$file" done The advanced version of the script would have to be able to handle spaces in file names and directory names preserve the original file names flatten PNG images if an alpha value is set compare the file size between the temporary converted image and its original determine if the difference is greater than a given precentage act accordingly The actual conversion could be done with imagemagick tools: convert -quality 92 -flatten -background white file.png file.jpg Unfortunately, my bash skills aren't even close to advanced enough to convert the scheme above into an actual script, but I am sure many of you can. My reputation points on here are pretty low, but I will gladly award the most helpful answer with the highest bounty I can set. References: http://www.formortals.com/introducing-cnb-imageguide/, http://www.turnkeylinux.org/blog/png-vs-jpg Edit: Also see my comments below for some more information on why I think this script would be the best solution to the problem I am facing.

    Read the article

  • Disable "longhaul" kernel module with a GRUB command?

    - by Julian Schweigert
    I've got a problem with a VIA C3 (1GHz)-system: the system freezes immediately when the CPU frequency goes under 731MHz because of an incompatibility with the (not completely implemented) i686 commands and a powersave feature of the kernel. There is a workaround: deactivate the "longhaul" kernelmodule via alias longhaul off in /etc/modprobe.d/aliases. But the system freezes before I can install any Linux distribution - even Clonezilla freezes. Is there a possibility to deactivate the module with a GRUB boot parameter before the kernel is loaded?

    Read the article

  • Open FDF document on Mac

    - by Corey Floyd
    I'm having the issue documented here: http://forums.adobe.com/thread/445594 When I try to open a FDF, I just get a pop up over and over again which asks me if I want to open the form. One possible solution is downgrading to Safari 3, but that is not proven to work. I thought maybe I could get the FDF to open in FireFox, but changing the default browser does not affect Reader, it still attempts to open the FDF in Safari (strange). So, does anyone know of a way to open this form? Thanks -Corey

    Read the article

  • Email etiquette checker?

    - by Benjamin Oakes
    Sometimes, in the heat of getting a lot of things done, I don't read emails I send as closely as I should. Is there an automated way to pop up warnings before a potentially-unpolite email is sent? I'm thinking about something that would say "wait, why don't you have a 'please' or 'would you' in that message?" I'm using Thunderbird 2 on Ubuntu 9.04. I may be willing to switch email clients if another program offers this. Thanks for your help!

    Read the article

  • Video Card needs additional mounting support

    - by Sean
    We are creating a fairly decent system with crossfire. The issue we are having is apparently the video cards are physically to heavy to be supported purely by the motherboard and case mounts. Whenever we have the case horizontal everything works fine however when we bring the case upright the computer stops working. Relevant Info: Video Cards (2) - Sapphire 5870 (http://www.newegg.com/Product/Product.aspx?Item=N82E16814102856) MotherBoard - Asus M4A79T Deluxe Case - CoolerMaster 922 HAF To me it looks as if an additional support bracket that could hold up the end of the card would be required (included with the viideo cards!!!) Does anyone have any experience with this.

    Read the article

  • Airport Extreme and Windows PC via regular LAN (not WIFI)

    - by Mr AJL
    So I got an airpoort extreme, and everything works beautifully on the mac, but my windows 7 PC which is connected via a regular ethernet cable can't see any network. The Win7 PC says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Thanks!

    Read the article

  • How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

    - by aireq
    I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in? Update I found the following in the manual off ASUS's website, which confirms my original suspicion that HDMI and DVI can't be used at the same time. But I'd still like to know if it's possible through software to switch between using the HDMI and DVI.

    Read the article

  • Intel Core i5-2467m - Turbo Boost not activating?

    - by Trevor Sullivan
    I have a Samsung Series 5 laptop with an Intel Core i5-2467m process @ 1.6Ghz. The processor supports Intel Turbo Boost up to 2.30 Ghz according to the specifications. The i5-2467m is a dual-core process with HyperThreading, so there is a total of four (4) virtual cores in Windows 7 SP1. http://ark.intel.com/products/56858/ I've installed the Intel Turbo Boost Technology Monitor v2.6 to monitor if Turbo Boost is enabled, and set it to "Always On Top." I followed this process to max out the CPU: Open (4x) PowerShell instances Set each instance's affinity to a distinct CPU vCore Ran this code in each instance: while (1 -eq 1) { } Unfortunately, after maxing out all 4 cores, my laptop got hot, but Turbo Boost never kicked in. Any ideas on how to ensure that I'm getting the 2.3Ghz Turbo Boost capability of my laptop?

    Read the article

  • How do I make a Data Validation drop-down exclude blanks?

    - by Iszi
    Related: How can I use non-adjacent cells on another sheet for a Data Validation drop-down, and only show non-blank values? For now, I've worked around the above problem by re-arranging my sheet so all the Data Validation Source cells are in one range. I'm leaving the above question open though, because I think it still poses an interesting problem. However, the issue now is that the Data Validation drop-down isn't working in the way I expected it to (and how I believe others are telling me it should). Even though I've got everything into one named range, Excel still shows blanks in a drop-down that references that range. Setup: Sheet 1 A1= (blank) B1= Header A2= 1 B2= Value1 A3= 2 B3= Value2 A4= 3 B4= Value3 A5= 4 B5= (empty) A6= 5 B6= (empty) A7= 6 B7= (empty) Sheet1!B2:B7 is named Validation Sheet2!A1 is set to use Data Validation with a Source =Validation, and in-cell drop-down. The drop-down in Sheet2!A1 shows: Value1 Value2 Value3 . . . (Dots represent blank lines) How can I get rid of these blank lines in the in-cell drop-down, while still including Sheet1!B5:B7 in the Data Validation Source? Note: I nuked the sheet, and tried it again without column A from Sheet1 (putting values from column B in the above example into column A), and it worked fine. Adding Column A back though, brought the blanks back into the Data Validation drop-down. What do I need to do to keep column A as I want it and keep the in-cell drop-down clean?

    Read the article

  • IE11 throws error in IEFRAME

    - by c69
    When I try to see "properties" of JSFiddle's logo, IE11 shows script error in file res://ieframe.dll/anchbrws.js Looking at the file, I see function BodyLoad() { var arrAll = document.all; for (i=0; i < arrAll.length; i++) { var elm = arrAll[i]; if (elm.id.substring(0,1) == "_") { if (elm.innerText== "undefined" || elm.innerText == "") { elm.innerText = L_NotAvailable_Text; } } } } from what I see, trying to read document.all is a stupid idea to do in IE11, which puts me to concern - is this a bug in IE's internal script or I have old version of some file(s) or my PC was compromised ? p.s: this error does not happen on other pages, nor on other elements of JSFiddle site.

    Read the article

  • Contacts Issue: Google Contacts, Nokia 5800 And Outlook, Sync and Images

    - by josecortesp
    Hello everyone, this is a multi-question, so please, feel free to answer just one or all of them. My actual situation is: Google contacts sync with Nokia 5800 using MFE(google sync), using google's fake "exchange server". Outlook sync with google using GoContact Sync software (http://www.webgear.co.nz/Products/GOContactSync.aspx). What I want, a easy(or not) way to correctly sync the three of them, even if I have to change some of my "escenario". I know outlook<-google contacts sync is not good yet, but if someone can suggest me some better SW than GoContact Sync. It'll be good. What I really want is to sync a least name, phone, email and image. Then, is there a way to get all my google contacts to by default use their own google image? I noted that, usually i have to manually choose it, and sometimes it doesn't work. I'll like to use something or someone's service to do this automatically. I have tried some services like Soocial, but it gives me a lot of trouble after the first sync, because soccial can ONLY get ALL your contacts, not just "My Contacts"; and also it gives me like 100 bad contacts in outlook because of their beta client. The final goal of all of this is to Get only "My Contacts" from google in Outlook and in the 5800 with their images Get ALL my contacts with their default image, meaning, the contact's personal image Get a solution to correctly sync the three of them, using Google's as the base for the rest of them. Thanks in advance. Again, feel free to sugest me solutions to just one or all them.

    Read the article

  • Citrix Access Gateway with Citrix Receiver

    - by vm370
    I'm currently using a Citrix Access Gateway with firmware 5.0.4 to provide access over an SSL-VPN to an isolated environment, which is connected to over the Citrix Access Gateway Client, which is delivered by the device by default. However we encountered different problems, e.g. that it's somehow not possible to get it out of the autostart (not registered as a service or in the autostart?!) and it killed the Cisco VPN Client, which is used in the company and unfortunately cannot be replaced. The Cisco client can also just be used again after a procedure with cleaning the registry from all CAG Client remains, which requires a lot of effort. Because of that, I'd like to check if there is an alternative to this client, since is this is a real pain... Unfortunately I couldn't find a way to use the Receiver with the CAG yet, but if you have any resources on how to build this workaround, I'd be very happy. Thanks a lot in advance UPDATE: If there are other alternatives I'd be even more happy, since using the Receiver would also mean that there is an issue with the ICA-Client, which is also used in our environments. From my experience, the Receiver and the ICA-Client are also no good friends...

    Read the article

  • Shortcut to offline folder

    - by Diego
    Is there a way to create a shortcut to a folder or file marked as "Always available offline" so it can be open directly when offline? A simple shortcut doesn't seem to work; I have to go through Manage Offline Files → View your offline files → Mapped Network Drives → etc

    Read the article

  • How can I set up multiple dynamic users to update a single network's dynamic IP

    - by d3vid
    On my home network we are allocated a dynamic IP. I want to configure ddclient (or an equivalent) to send IP updates to DNS-O-Matic/OpenDNS only when I am on my home network. I do not want to send IP updates when I'm on my office network. Can this be done? I am prepared to use different FLOSS software or a different free DNS service. Additionally, there are multiple users who may be on the home network or away on other networks. How can we configure ddclient on each machine so that whoever is on the home network updates the IP (i.e. so we don't have to rely on a particular machine being on the network to update the IP). OpenDNS support have said we can't simply install updater software on each machine.

    Read the article

  • How to use dd to make splitted ISO images from an storage device?

    - by Gustavo Bandeira
    This is a double question, I just hope it's valid. I need to know how to use dd to make splitted ISO images from some storage device, I'm doing it through SSH: the process is slow and the risk of faling at the mid of the operation (1) is high then I need to know how to make these splitted ISO images from my storage device. (2) I'm searching for some reference on dd, it could be a book or a good website about it for when any doubt arises. 1 - I'm doing it on a ~60GB storage device, it took me a whole day to copy ~10GB from this disk. 2 - For curious people, I'm trying to recover an accidentaly deleted file from an iPod, until now I've been able to make the whole process, I just need to improve it beucase I left it copying the disk yesterday: Today it gave me an error when it was at ~10GB.

    Read the article

  • Mechanical mouse using USB-to-PS/2 Adapter freezes occasionally

    - by izn
    I am using an AOpen PS/2 mechanical mouse in Ubuntu 11.10 with a Staples USB-to-PS/2 Adapter with my Intel DP67DE motherboard. The mouse is more comfortable for my hand as it has a lower height than optical mouses. Occasionally the mouse cursor freezes and often I have to unplug it from the USB port and plug it back in to unfreeze it. This happens with all the USB ports. I've been using the adapter for a few weeks now and this seems to be happening more often recently. What might be happening and is there anything that can be done to fix this?

    Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >