Search Results

Search found 92087 results on 3684 pages for 'usb server'.

Page 1591/3684 | < Previous Page | 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598  | Next Page >

• HP ProBook 4720s UEFI boot only manually into 12.04

  - by HainjeDAF

  I'm trying to get UEFI boot on my ProBook 4720s. Because I swapped the HDD for a SSD I had a blank canvas to start. The 12.04 Live DVD refuses to boot into UEFI, as do Alternate and desktop CD's. However, when I make a 16Gb flashdrive into a live FS using the bootdisk tool in ubuntu, I can boot from USB, manually into UEFI mode. It even sidesteps to DVD as medium when I boot from USB with 12.04 Live DVD present. I installed a GPT partitiontable with part 1, label EFI, fs FAT32, flag BOOT, mounts at /boot/efi part 2, label Linux-ROOT, fs ext4, no flags, mounts at / part 3, label Linux-SWAP, fs swap, no flags, mounts as swap So far, My system refuses to boot from harddrive by itself. I have to select "Boot from EFI file" and manually browse to (HD0,GPT1)\EFI\ubuntu\grubx64.efi any other option ends in "no system disk, please insert boot disk" I tried installing BURG, but that merely enforces non-efi boot. I tried most of the solutions I could find, but one says \EFI\grub\grub.cfg next says \EFI\ubuntu\ubuntu,cfg I'm confused and getting frustrated. How do I correctly install Ubuntu 12.04 in UEFI mode on this machine???

  Read the article

• Virtualbox does not run: NS_ERROR_FAILURE

  - by dschinn1001

  here is ubuntu 12.10 virtual-box is somehow not working: I was trying to install win7 on to an usb-hard-disk. boinc is switched off and RAM-size is set to 4096 MB (too big ? of possible 8 Gibi ) report of virtual-box is: the com-object for virtualbox could not be created. the application is now ended. Start tag expected, '&lt;' not found. Location: '/home/$user/.VirtualBox/VirtualBox.xml', line 1 (0), column 1. /build/buildd/virtualbox-4.1.18-dfsg/src/VBox/Main/src-server/VirtualBoxImpl.cpp[484] (nsresult VirtualBox::init()). Fehlercode:NS_ERROR_FAILURE (0x80004005) Komponente:VirtualBox Interface:IVirtualBox {c28be65f-1a8f-43b4-81f1-eb60cb516e66} comment of me: why is virtualbox installing xml into folder of $user in .VirtualBox ? should it not be on usb-harddisk ? (with 500 Gibi ) first installation attempt was breaking off (with win7 in 64Bit) should I try virtual-box (ubuntu 64Bit) with win7 in 32Bit ? should I leave RAM-size of virtual-box to default 512 MB ? thanks for reply

  Read the article

• Create Windows Bootloader/Boot into Windows from Ubuntu

  - by Kincaid

  I have computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I have decided I wanted to remove Ubuntu, as I hardly used it. As a stupid mistake, I deleted the Ubuntu partition before changing the bootloader to replace Grub. Whenever I know boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader solutions. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Is there any options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? In the end, I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine -- I can use EasyBCD from there. Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows. Any help would be greatly appreciated.

  Read the article

• Is it reasonable to expect knowing the whole stack bottom up?

  - by Vaibhav Garg

  I am an Sr. developer/architect/Product Manager for embedded systems. The systems that I have had experience with have typically been small to medium size codebases - typically close to 25-30K LOC in C, using 8-16 and 32 bit low end microcontrollers. The systems have been entirely bootstrapped by our team - meaning right from the start-up code to the end application code has either been written by the team, or at the very least, is thoroughly understood and maintained by us. Now, if we were to start developing more complex systems with complex peripherals, such as USB OTG et al. (think, low end cell phones), there are libraries and stacks available commercially and from chip vendors that reduce the task to just calling the right APIs and being able to use those peripherals. Now, from a habit point of view, this does not give me and the team a comfortable feeling, not being able to comprehend the entire code tree, with virtual black boxes at the lower layers. Is it reasonable to devote, and reserve, time getting into the details of how the APIs are implemented, assuming that the same would also entail getting into details of relevant standards (again, for USB as an example)? Or, alternatively, should a thorough understanding of the top level usage of the APIs be sufficient? This of course assumes that the source codes to all libraries are available, which they are, in almost all cases. Edit: In partial response to @Abhi Beckert, the documentation is refreshingly very comprehensive and meticulously maintained, AFAIK and been able to judge. I have not had a long experience with the same.

  Read the article

• sudo dhclient eth0 | sudo: unable to resolve host ubuntu

  - by Merianos Nikos

  I have a computer of a friend of mine, that runs Ubuntu (I don't know what version, due to the current system status) and while he was updating the kernel, he reboot the computer (yes that could be happen !!, anyway) Currently I am trying to recover the system by using a live USB, with Ubuntu installed on it. What I am doing, is the following: Update Failure The problem is that when I try to execute the fifth step, I am getting error because I do not have Internet access. The computer is properly wired on my rooter, and I have Internet access in any place apart of the shell. This message for example is send it via the live USB. but I cannot access the Internet via the shell. In my shell I try to use this command: sudo dhclient eth0 but the result of this command is the following message sudo: unable to resolve host ubuntu My hosts file has the following content: 127.0.0.1 localhost 127.0.1.1 ubuntu # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts how can I get connected on the Internet, in order to download the appropriate updates ? UPDATE 1 I just notice, that when I execute the ifconfig I am getting the following warning: Warning: cannot open /proc/net/dev (No such file or directory). Limited output. UPDATE 2 I just found that, and looks like solving the problem with dhclient eth0 command, but still I cannot ping Google UPDATE 3 Now the sudo dhclient eth0 returns the following message: RTNETLINK answers: File exists UPDATE 4 I just ping my rooter and I getting response, so, it is looks like I cannot ping outside the rooter (ie. Google) Kind regards ...

  Read the article

• Boot-repair commands not found in PATH or not executable

  - by Bram Meerten

  I recently had problems with my ubuntu partition (after the battery died), I managed to fix them by running ubuntu from usb and run gparted. It worked I can access my files on the partition by running ubuntu from usb. But when I restart the computer, after selecting ubuntu in Grub, I get a black screen with a white underscore. I googled the problem, and tried to solve it by setting nomodeset, but it didn't work. Next I wanted to try to fix Grub using boot-repair, I clicked on 'Recommended repair', it tells me to type the following commands in the terminal: sudo chroot "/mnt/boot-sav/sda5" apt-get install -fy sudo chroot "/mnt/boot-sav/sda5" dpkg --configure -a sudo chroot "/mnt/boot-sav/sda5" apt-get purge -y --force-yes grub-common But when running the second command, I get this error: dpkg: warning: 'sh' not found in PATH or not executable. dpkg: warning: 'rm' not found in PATH or not executable. dpkg: warning: 'tar' not found in PATH or not executable. dpkg: error: 3 expected programs not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. I didn't edit /etc/environment (or any other files), this is what it looks like: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" RUNNING_UNDER_GDM="yes" I have no idea how to fix this. I'm running dualboot Ubuntu 12.04 and Windows 7, Windows boots fine.

  Read the article

• Lexmark X5650 doesn't print (scanning works)

  - by unor

  I want to use a Lexmark X5650 under Ubuntu. When I connect it via USB, Ubuntu recognizes the device, but can't find a driver. On the Lexmark support site, you can select "Unix/Linux" and then "Ubuntu 9.04", "9.10", "10.04" and "10.10". However, all versions lead to the same driver: lexmark-08z-series-driver-1.0-1.i386.deb.sh.tar.gz (Last updated: 2012-04-13). While installing this driver, the installer asks me to connect the device. As soon as I connect it via USB, Ubuntu now adds the printer automatically. So after the installation completed, I had 2 printers set up. But I can't print anything (I tried it with both printer configurations). Scanning works fine, though. So I guess the driver installation and the device connection are successful. When I try to print something, the print job is listed in the printing queue, but nothing happens. After some time, I get an error message which starts a debug wizard, but in the end it reads something like "Sorry, couldn't find the reason". I had several different error messages (unfortunately, I didn't record them), one was approximately like "printer cannot communicate with computer". Another said that my color ink was low (which is true, but black is full). Another said there was an input/output error. I tried it with Ubuntu 11.10. Because I read that some people had success with 10.04., I installed it in QEMU and installed the driver there, too. Same problem, though. I'd like to upgrade to 12.04, if it should work there for any reason, but I read that for some people this printer stopped working in 12.04 :/ So, it would be best if the printer would work in 12.04. If that's not possible, I'd be fine with starting a QEMU virtual machine with any GNU/Linux distribution that works with my printer.

  Read the article

• Nothing happens when I connect my Iphone 3G to my laptop

  - by Allwar

  Hi, how do i connect my iphone to my laptop (ubuntu 10.04) so that i can sync music and be able to look at it as a usb stick? (this is what I want to do but there is a problem.) When i connect it to my laptop nothing happens, it doesn't show up as an ikon or as a mass storage device. My Iphone runs 4.2.1 it's an Iphone 3G and it's not jailbroken for the moment, is that a problem? My laptop is an Asus 1201n ubuntu 10.04 (64-bits) Bus 002 Device 005: ID 05ac:1292 Apple, Inc. iPhone 3G I connected my Ipod Video (30 gb) and that one doesn't appear as well So I'm kind of stuck now. The problem probably lies in the system, because the usb port is working. Bus 002 Device 006: ID 05ac:1209 Apple, Inc. iPod Video I have added this PPA, I have done all of the sudo update and upgrade. but my computer doesn't realize that my Iphone is connected, whish isn't related to libimobiledevice. The port is working fine, it's my computer it doesn't recognize that I have my Iphone plugged-in! and the phone is working (tested it on my mac). I have the latest versions of these programs: hipo, ipod, gtkpod, ifuse, libusmuxd1 and usbmxd. I try to mount my iphone with fuse but i got this error. ( I connected my iPhone in windows 7 and it worked annoyingly.) alvar@alvars-laptop:~$ ifuse /mnt/iphone/ ERROR: the mount point specified does not exist

  Read the article

• kubuntu 12.10 will not boot on mac 2.93Ghz intel core 2 duo

  - by Jake Sweet

  I feel like I've tried it all and nothing is changing. I've tried booting from a liveUSB, a liveDVD, and I've checked the mod5 everything matches up. I've even tried different distro's same result on all of them. Just for reference: linuxmint 13kde and Fedora 17. I've also tried changing my liveUSB building software just in case. I've tried unetbootin and Linux USB builder. Both have same results, my opinion is that it is a hardware issue since I'm having near the same result with all of these variables. So now what is actually happening? I can boot up to a screen. I say A screen because some of the ways that dvd's and usb's boot differs. Now on liveusb I'm reaching a black screen with white text. Says booting: done, then below says loading ramdrive: done, then below that it says preparing to boot kernel this may take a while and buckle in or something to that effect. Then nothing. That's it computer freezes. I've waited up to 8 hrs and still nothing. Ok for the liveDVD Everything goes according to instructions per pdf files on every distro, until linux starts. I can only run in compatibility mode. When any other option is tried the computer seems to freeze/stall/be a pain in my butt... Ok well that seems to wrap it up. Also if I'm not explaining something well, I'm sorry I can try to clear anything up. I'm not the best at descriptions. I'm leaving with a tech specs of my mac: 2.93GHz Intel Core 2 Duo, 4 GB ram, NVIDIA GeForce GT 120 graphics, bought in late 09" it's the 24" model, let me know if anymore information will help. Also thanks in advance

  Read the article

• Error: You need to load the kernel first in Grub

  - by Exeleration-G

  I have Lubuntu 11.10 installed on /dev/sda3, and Xubuntu 11.10 on /dev/sda5. A while ago, while being on Lubuntu, I made a mistake somewhere in creating a Live USB: by mistake, I installed a Live USB bootloader into /dev/sda3. This didn't result in any problem at that time. Today, I updated the kernel. I had to restart Lubuntu. In Grub, Lubuntu suddenly didn't appear anymore, and I booted automatically in Xubuntu. I tried to run update-grub and tried to use grub-customizer to get Lubuntu back in Grub, but this didn't work. I ran os-prober, but it doesn't show me Lubuntu. Then, I tried to add a new entry to /etc/grub.d/ on /dev/sda5 called 12_lubuntu. It contained the following: #!/bin/sh -e echo "Lubuntu" cat << EOF menuentry "Lubuntu" { set root=(hd0,3) linux /boot/vmlinuz initrd /boot/initrd.img } EOF After doing that, I ran update-grub and with grub-customizer, I wrote the Grub-configuration to MBR, that is: /dev/sda. Suddenly, Lubuntu appeared in Grub. I tried to launch it, but when doing this, the following message appeared: Error: You need to load the kernel first How can I make Grub start Lubuntu again?

  Read the article

• Black screen appears when booting new install of 11.10 on my desktop, cannot access Grub menu to fix

  - by Cee

  I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

  Read the article

• How do I get network working on a Dell n5010 - Ubuntu 10.04

  - by cyberroger

  Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

  Read the article

• My processor is not detected intel core 2 duo

  - by walid

  My processor is not detected intel core 2 duo When I type $uname -m -p I get this i686 unknown I have Ubuntu 10.10 netbook remix but the cat /proc/cpuinfo gives right identification of two processors as below processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.99 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping : 6 cpu MHz : 1826.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow bogomips : 3657.53 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: The problem is with programs that uses more than one core like virtualbox and bitcoin which refuses to use more than one core Is there anythign wrong or anything that I can do? My installation is from a live usb iso on a USB

  Read the article

• Ubuntu not shutting down ( going to black screen ) 12.04

  - by Orrin Fox

  I am currently using a USB persistent install of ubuntu. its a simple 4GB drive with a 2.8GB partition ( casper-rw storage partition ). I setup an administrator account and set it to login automatically. I also removed ubiquity to simply use this as a go anywhere install. Heres my issue. Im logged in as my account, and I click the top right gear and select "shut down". Text pops up showing its quitting processes.. etc. and then goes to the plymouth animation. But... The screen goes black, and then it goes to the login screen. Now when im at the login screen i go into terminal ( alt+F2 ) and dont you know, im logged in as Ubuntu. so then I try the following: ubuntu@ubuntu:~$ sudo shutdown now It goes to the plymouth screen again as if its shutting down, AND the screen goes black once again but the computer has not turned off, as in the usb is still flashing the light, the fans are still on, the only thing off is the screen. Is this a bug? If not maybe i did something wrong? Perhaps its that I made an account but... if there is a work around for this please let me know. Thanks again, Fox

  Read the article

• How to run installation CD for second monitor?

  - by dobsoft

  I am running ubuntu 14 off of a live USB. I have a second monitor that I would like to use while using ubuntu. It has an installation cd that you have to install before using, and when I click on the .exe file the Archive Manager tries to open it and says an error occurred while loading the archive. Thanks for the help. Edit: additional information It just doesn't show up when when I'm in the display settings area. I press the locate(name is probably something else) monitor button too. I know it needs the CD because when I was using it with Windows it didn't work until I went through the installation process on the CD. If ubuntu doesn't use .exe files is there a way to use the CD still? Monitor info from label: -acer LCD monitor -model number: S200HQL Version: S200HQL bd I connect it to my computer using a VGA cord which is connected to a j5create VGA to USB adapter. Not sure if this helps: VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) lsusb output: Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 005: ID 0bc2:2100 Seagate RSS LLC Bus 002 Device 007: ID 0711:5200 Magic Control Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c18 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Getting MTP to work with a Galaxy tab 2 7.0?

  - by Wouter

  I'm trying to get MTP with the galaxy tab 2 7.0 working on my ubuntu installation. Such that I can access the files. I tried to do what is described here: http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access I however fail at executing one of the following commands mtp-detect | grep idVendor mtp-detect | grep idProduct This fails [20:42|0] $ mtp-detect | grep idVender Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 [20:44|0] $ mtp-detect | grep idProduct Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 Now my guess was was that the idVender is the same as the VID (04e8) and the idProduct is the same as PID (6860) Now I continued to work with those values and completed the tutorial. When finished I tried android-connect This returned fuse: bad mount point `/media/GalaxyTab': Transport endpoint is not connected Does anybody have a clue what to do? Also I want to note that when I connect my GalaxyTab 2 7.0 that I still get a pop-up of ubuntu that a device was connected. I also can still see the mapstructure, the problem however is is that all the folders have 0 bytes and do not have any subfolders. I can only see the folders in the root. ps. I also checked a similar question and tried what is described in this answer http://askubuntu.com/a/88630/27480

  Read the article

• Ubuntu 12.04.2 Dual boot UEFI Windows 8 Preinstalled CX21903W Ultrabook

  - by user180782

  Hi i have a problem trying to install ubuntu. The machine is a CX Ultrabook model CX.21903W Intel I5 with 500GB hard disk, 8 GB ram and 32 GB SSD. From Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported), and according to the steps guide: 1 - We create a partition from Win8 (70 GB) from the own win8 program. 2 - Confirm-SecureBootUEFI=True. 3 - From Win8, shift + Restart and from special menu we selected the UEFI Firmware Setting. 4 - From BIOS Option: ------Option 1) Disable Secure Boot. ------Option 2) Disable UEFI (Not Available) from Option 1: Three ways is available. With Secure Boot enable - We can't even boot ubuntu. A red windows saying Soft unproper signed. With Secure Boot disable - and this config in boot device order: ----1: UEFI: USB ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu then a black windows appears and nothing happens. The same result if install ubuntu is selected. With Secure Boot disable - and this config in boot device order: ----1: USB (No UEFI) ----2: Windows Boot Manger ----3: Others and CSM (Compatibility Support Module): enable - GRUB appears and selecting try Ubuntu, - Ubuntu boots and we can install it even. 5 - Rebooting and just changing the boot order as ----1: Ubuntu [] ----2: Windows Boot Manger ----3: Others then nothings happens. 6 - Booting from LiveUSB again and, as per instructed, making Boot-Repair (A warning windows: Ubuntu is working in legacy mode.). 7 - Saving changes and rebooting, Grub works but selecting Ubuntu, a black windows appears and nothing happens. Selecting Win8, Win8 boots and works. Untill now we can't make the ubuntu installation. Any suggestion will be welcomed. kind regards and thanks in advance.

  Read the article

• What would cause SSD to become not detectable?

  - by Balthazar

  I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

  Read the article

• Upgrade from 11.04 to 12.04 failed - unable to login

  - by Tobias M.

  Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

  Read the article

• How to create or recover Windows Bootloader after deleting Ubuntu boot drive

  - by Kincaid

  I have a computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I decided to remove Ubuntu, as I hardly used it. I deleted the Ubuntu partition accidentally before replacing the Grub bootloader. Now, whenever I want to boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Are there any other options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine (I can use EasyBCD from there). Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows.

  Read the article

• Mouse click events are delayed when moving the cursor in xubuntu 12.04

  - by bobbaluba

  I am trying out live xubuntu on my samsung n150 (netbook, similar to eeepc). So far everything seems perfect, except for this one thing. When I am clicking the mouse while moving the cursour, the click event is delayed. This is extremely annoying when i try to to move windows, because i end up clicking the window behind the window i am trying to move and thereby changing focus. This goes for all applications. I.e selecting text is difficult. There is no lag in the cursor movement, just the click event. The click event is registered with the new mouse position, not the one when the mouse was clicked. I tried searching for the problem, but all the other cases where either kind of different, or had no solution. EDIT: After testing some more, here are some more information. The click doesn't occur until i stop moving the cursor. If I move the cursor smoothly around, the click never gets through. I have ubuntu netbook remix 10.04 installed, and have no problems with the mouse there. EDIT2: Once I connected a usb-mouse, the problem dissappeared. Dragging now works perfectly with both the track pad and the usb mouse. I will update once I have installed xubuntu and figured out if this is a persistant problem. EDIT3: I have installed, and the problem is still there. It dissappears when I have a second mouse connected however, and after I resume from suspend. My solution for now, is just to keep the dongle connected all the time.

  Read the article

• How do I get a Laserjet M1212nf MFP working?

  - by Leandro

  I am trying to install a multifunctional printer Laserjet M1212nf MFP on Ubuntu 12.04. I downloaded and install the hplip indicated by the official web site. At the end of the installation I chose reboot the whole system and next I call hp-setup in the terminal (as normal user and then as root). After select in the dialog box my printer I got the following error: Searching... (bus=usb, search=(None), desc=0)<br> /Traceback (most recent call last):<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1255, in NextButton_clicked<br> self.showAddPrinterPage()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 690, in showAddPrinterPage<br> self.readwriteFaxInformation()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1079, in readwriteFaxInformation<br> self.fax_name_company = unicode(d.getStationName())<br> UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 20: ordinal not in range(128) I think at this stage the plugin should be downloaded, but it is not working. Any suggestion on how to solve this problem ? Edition: After running hp-toolbox I got the following error message : Unable to communicate with device (code=12): hp:/usb /HP_LaserJet_Professional_M1212nf_MFP?serial=000000000ST10HPQSI1c

  Read the article

• How to install Wacom Bamboo Pen

  - by casadrya

  I have a new Wacom Bamboo Pen. I'm using Ubuntu 10.10 64bit. After googling a little bit, I checked that xserver-xorg-input-wacom was installed. I plugged in my tablet. I rebooted my computer. Nothing special happened. I opened Inkscape. The tablet didn't work. I opened Inkscape's Input devices dialog. I didn't understand anything. I tried to blindly click some options in that dialog but nothing seemed to have any effect. Same with Gimp. After googling some more I found the linuxwacom website with source code, this didn't seem to work. So... any help? As requested: lsusb Bus 005 Device 002: ID 056a:00d4 Wacom Co., Ltd dmesg | tail [ 492.961267] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 493.144862] input: Wacom Bamboo 4x5 Pen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input6 [ 493.158854] input: Wacom Bamboo 4x5 Finger as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input7

  Read the article

• Ubuntu 11.04 does not detect my tata photon +

  - by nikhil

  I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

  Read the article

• Cannot Restore GRUB (Ubuntu 11.04 + Win 7)

  - by Benny

  I'm trying to fix GRUB on my PC, but I'm running into serious issues doing so. Any help would be greatly appreciated as I'm completely crippled right now. Here is the sequence of events for this PC: Installed Windows 7 Split full disk into two partitions (one for win7 and one for multimedia) Long time passed Split one of the partitions into two again Installed Ubuntu 11.04 on new partition A little time passed Windows 7 acting up, reinstall Ubuntu GRUB gone Tried restoring GRUB by mounting and grub-install from live USB Tried switching to a live CD instead of USB (thinking it might be the drive) Now I don't see GRUB and I'm getting "input/output" errors An example i/o error: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe86aff6 Device Boot Start End Blocks Id System /dev/sda1 * 1 48727 391393280 7 HPFS/NTFS /dev/sda2 48727 77063 227612647+ 7 HPFS/NTFS /dev/sda3 77063 91202 113566721 5 Extended /dev/sda5 77063 90622 108908544 83 Linux /dev/sda6 90622 91202 4657152 82 Linux swap / Solaris ubuntu@ubuntu:~$ sudo mount /dev/sda5 /mnt ubuntu@ubuntu:~$ sudo grub-install --root-directory=/mnt /dev/sda mkdir: cannot create directory `/mnt/boot': Input/output error ubuntu@ubuntu:~$ cd /mnt ubuntu@ubuntu:/mnt$ ls ls: cannot access etc: Input/output error

  Read the article

< Previous Page | 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598  | Next Page >