Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 160/788 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • shorewall masquerading from tun0 to ppp0

    - by damir
    First interface is ppp0 (pptp vpn) Second inteface is tun0 (openvpn) Third interface eth0 (default gw interface) Openvpn is set to change default route on client for all packets to go through tun0 vpn, that part is working ok. I would like to make all packets from tun0 go to ppp0 and get out from that interface (MASQ) but somehow they always end up on eth0 (default gw interface) /etc/shorewall/masq ppp0 tun0 doesn't seem to work

    Read the article

  • Why do manufacturers not show all hardware power usage?

    - by Drew
    I find it slightly more difficult to build a computer when I do not know how much power is needed for a component. When selecting a power supply for a computer, it is difficult to know how large of one to get. You don't want to go too large for cost reasons and circuit reasons, but you don't want to go too low and not be able to properly use every component. For instance, a graphics card might say "Minimum of a 500 Watt power supply. (Minimum recommended power supply with +12 Volt current rating of 30 Amps.)" But it really needs 360W (12V * 30A). So why don't they just say "Uses 360W max and xxxW peak"? Processors, I have noticed are good at reporting their power usage, but aside from processors and sometimes graphics cards, power usage is easily found. What is the power consumed by the Blu-ray / DVD drives? By the HDDs/SSDs? By the Mobo? etc. Why are these questions not easily answered when building a machine?

    Read the article

  • Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

    - by GriffJ
    Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

    Read the article

  • What hardware is at physical address 0x80000000 on powerpc New World Macintosh?

    - by tinkerer
    Open Firmware device tree gives no clue what device might decode at physical address 0x80000000 to 0x8008200 on a G4 New World Macintosh. The mmu has three adjacent Virtual=Real translations for that block. They are the only address translations reported between the top or physical dram at 20000000 and the start of the PCI bridges at f0000000. (A possible clue is that frame-buffer-addr is reported as 9c008000 by Open Firmware, and that is not in the reported translation table either). I believe the architecture has been around since about 1999.

    Read the article

  • Setting MTU on Exalogic

    - by csoto
    For many reasons, a system administrator may want to change the MTU settings of a server. But in a system like Exalogic which contains lots of interconnected nodes and other various components, it's important to understand how this applies to the different networks. For example, when bringing up bonding of InfiniBand an error like the following may be thrown: Bringing up interface bond1: SIOCSIFMTU: Invalid argument Both scripts ifcfg-ib0 and ifcfg-ib1 (from the /etc/sysconfig/network-scripts/ direectory) have MTU set to 65500, which is a valid MTU value only if all IPoIB slaves operate in connected mode and are configured with the same value, so the line below must be added to both network scripts and then restart the network: CONNECTED_MODE=yes By the way, an error of the form “SIOCSIFMTU: Invalid argument” indicates that the requested MTU was rejected by the kernel. Typically this would be due to it exceeding the maximum value supported by the interface hardware. In that case you must either reduce the MTU to a value that is supported or obtain more capable hardware. This problem has been seen when trying to modify the MTU using the ifconfig command, like the output of the example below: [root@elxxcnxx ~]# ifconfig ib1 mtu 65520 SIOCSIFMTU: Invalid argument It's important to insist that in most cases the nodes must be rebooted after the MTU size has been changed. Although in some circumstances it may work without a reboot, it is not how it is typically documented. Now, in order to achieve a reduced memory consumption and improve performance for network traffic received on IPoIB related interfaces, it is recommend to reduce the MTU value in interface configuration files for IPoIB related bonds from 65520 to 64000. The change needs to be made to interface configuration files under the /etc/sysconfig/network-scripts directory and applies to the interface configuration files for bonds over IPoIB related slave devices, for example /etc/sysconfig/network-scripts/ifcfg-bond1. However, keep in mind that the numeric portion of the interface filenames that corresponding to IPoIB interfaces is expected to vary across compute nodes and vServers and so cannot be relied upon to identify which interface files are for bonds are over IPoIB rather than EoIB related slave interfaces. To fix these MTU values to the recommended settings, there are very useful instructions and a script on the MOS Note 1624434.1, and it's applicable physical and virtual configurations of Exalogic. Regarding the recommended MTU value for EoIB related interfaces, its maximum appropriate value is 1500. If for some reason a vServer has been created with a higher value (set on the /etc/sysconfig/network-scripts/ifcfg-bond0 file), then it must be fixed. An error like the following could be thrown under this circumstance: [root@vServer ~]# service network restart ... Bringing up interface bond0:  SIOCSIFMTU: Invalid argument Also an error like the one below can be seen on the /var/log/messages file of the vServer: kernel: T5074835532 [mlx4_vnic] eth1:vnic_change_mtu:360: failed: new_mtu 64000 2026 The MOS Note 1611657.1 is very useful for this purpose.

    Read the article

  • Why the Utilities button of Virtual Machine Settings/Hardware/Hard Disk(IDE) is disabled?

    - by q0987
    I am using ubuntu 11.04 virtual image with VMWare Player 4.0.2 build-591240. Because I found that the folder that holds the VMWare image goes to 8GB and want to shrink the size by using the utilities tool provided by the VMWare Image Player. However, I found that the button is disabled like this. Question How to enable the button so that I can use it to shrink the size of virtual image used by ubuntu? Question If I cannot enable the button, is there another way that I can shrink the size of used space? Thank you

    Read the article

  • What hardware combonation is better one with a i7-720QM processor and GeForce 310M graphics or one w

    - by Mason
    I am looking for a new laptop and the two i am deciding between is an Asus with Intel® Core™ i5-430M processor and NVIDIA GeForce GTS 360M graphics. Or a Toshiba with the Intel® Core™ i7-720QM processor and NVIDIA GeForce 310M graphics. I am looking for a computer to use for college and be able to play games on. I want to know what one I should get they are both the same price.

    Read the article

  • AHCI on Windows if BIOS does not have the option but all hardware does support it?

    - by Foo Bar
    Is it somehow possible to use AHCI on Windows if the BIOS does not have the option to enable it? This is a known problem especially on mid-old Laptops that have chipsets and drives that perfectly support SATA and AHCI, but only provide the legacy IDE mode in BIOS. Especially with SSD's this can often be a problem. I know that Linux has no problems to run everything in SATA and AHCI mode on these machines. So, is there any possibility to also make Windows "override" the BIOS? Some kind of alternative BIOS's, drivers, etc? Or some kind of Linux-based boot module that emulates an AHCI-capable BIOS to Windows while booting up?

    Read the article

  • Does informing your destination hardware impact on ebook convertion on Calibre?

    - by Roberto
    If I connect my Kindle Fire to the computer, Calibre gives me an option to convert to Kindle Fire mobi format. Is this different from just asking to convert to mobi? I don't want to connect my Kindle anymore, I want to send to the cloud, but I'm not willing to lose conversion quality because of lack of ebook reader information. Of course, I couldn't find the convert to Kindle option without it being connected.

    Read the article

  • How do I program a hardware button on my laptop?

    - by daniel11
    So I have a set of touch screen buttons on the top of my laptop's keyboard, (one turns on power save mode, one disables/enables the mouse touch pad, one toggles the wifi adapter, and two turns the volume up/down). However there's another one that opened a file backup utility that came with my laptop. Since I bought my laptop, I've uninstalled that utility, rendering this button useless. Would it be possible to reprogram that button to open another file or program on my computer? And if so, what are the requirements and how would I go about doing it? Thanks in advance!

    Read the article

  • Hardware question re Hauppauge WinTV-HVR 900 HD video/tv capture unit used with laptop with HDMI output laptop HDMI connection

    - by Bill
    I've ordered a Hauppauge WinTV-HVR 900 HD video/tv capture unit. It is mainly for use with my HP desktop running Windows 7 Professional, but I will want to use it occasionally with my partner's HP laptop running Vista Home Premium. The latter has an HDMI output which works perfectly with my LG 42" LCD TV, enabling display of BBC iPlayer and other catchup services. Will the live or recorded HD signal from the WinTV-HVR 900 HD connected to the laptop's USB input be output on the laptop's HDMI socket as HD? Come to that, will SD content be output? The reason I ask is that I had a problem with a Pinnacle unit which displayed OK on the laptop's screen but not on the TV screen (which did display all the normal Windows material). I've tried the Hauppage website, but it doesn't even acknowledge the existence of the WinTV-HVR 900 HD!

    Read the article

  • Hardware changes to require XP Activation ? (for a Virtual Machine)

    - by NVRAM
    I have WXP-64 running on a VM and, for testing and performance reasons, I would like to occasionally change the allocations for it. Changes might include: Number of CPU cores, Amount of RAM Add/remove network adapters. But I'm concerned that XP will demand re-activation and that I might eventually have licensing issues if I do this. So, can anyone tell me: What kind of changes trigger re-activation in XP? Is there limits or caveat with regard to re-activation? I've perused this question and the article it references, but wanted more recent and verified info. (FWIW, I'm not trying to cheat: the OS copy was purchased explicitly for the VM.)

    Read the article

  • Moving Windows 7 OEM from one hard disk to another but retaining the rest of the hardware

    - by Dane
    I think this should be very easy but it doesn't seem like there's a whole lot of info out there. I've personally never done this exact maneuver because I've never needed to retain the OEM licence before. I have a laptop and I wish to simply swap out the hard disk with a bigger one but keep the Windows installation and files intact. Do I use Windows Backup and Restore and burn DVDs or do I just Acronis or something similar. Or is there an even easier way of doing this involving a third party desktop? Any help much appreciated.

    Read the article

  • QxOrm 1.2.3 vient de sortir, l'ORM pour Qt supporte la compilation statique et de nouveaux déclencheurs SQL

    Bonjour, QxOrm 1.2.3 vient de sortir. Voici les nouveautés de la version 1.2.3 : Nouvelle interface qx::IxPersistable (classe abstraite) pour simplifier la notion de polymorphisme en utilisant la bibliothèque QxOrm ; Pour plus de détails sur cette nouvelle interface, rendez-vous sur la FAQ : 'Comment utiliser l'interface qx::IxPersistable ?' ; Nouvelles méthodes pour l'interface qx::IxCollection pour parcourir les éléments de la liste sans connaitre le type associé ...

    Read the article

  • Maxivista vs. Synergy vs. hardware KVM switches [closed]

    - by GetFree
    I have 2 PCs on my desk, each one with its own screen, mouse and keyboard. And it's a pain moving from one PC to the other (even though they are one foot away from each other). So, it's time to change to different approach: KVM switches. What would you recommend for a setup like mine? I dont need to change monitors since they are both in front of me. I just need a way to change mouse and keyboard. I use Windows on both PCs and money is not an issue if it worth it. What would be the best option for a seamless integration of the two PCs? Edit: What about other software similar to Synergy, like Input Director? What's more convenient in your experience?

    Read the article

  • Can different drive speeds and sizes be used in a hardware RAID configuration w/o affecting performance?

    - by R. Dill
    Specifically, I have a RAID 1 array configuration with two 500gb 7200rpm SATA drives mirrored as logical drive 1 (a) and two of the same mirrored as logical drive 2 (b). I'd like to add two 1tb 5400rpm drives in the same mirrored fashion as logical drive 3 (c). These drives will only serve as file storage with occasional but necessary access, and therefore, space is more important than speed. In researching whether this configuration is doable, I've been told and have read that the array will only see the smallest drive size and slowest speed. However, my understanding is that as long as the pairs themselves aren't mixed (and in this case, they aren't) that the array should view and use all drives at their actual speed and size. I'd like to be sure before purchasing the additional drives. Insight anyone?

    Read the article

  • StructureMap - Scan - Generic Interface with base implementation and specific.

    - by Morten Schmidt
    Hi I have an interface something like this: interface IGenericSetupViewModel<T> I then have a default implemtation of this, something like this class GenericSetupViewModel<T> : IGenericSetupViewModel<T> For some specific classes i have a specific implementation like this: class ContractSetupViewModel : GenericSetupViewModel<Contract> Now i want to make StructureMap return the correct instance, when asking for a ObjectFactory.GetInstance<GenericSetupViewModel<Contract>(); I would like to get ContractSetupViewModel returned, when asking for anything else, i would like to get an instance of GenericSetupViewModel<T> I tried doing this: StructureMap.ObjectFactory.Configure(x => { x.Scan(y => { y.TheCallingAssembly(); y.AddAllTypesOf(typeof(IGenericSetupViewModel<>)); y.ConnectImplementationsToTypesClosing(typeof(IGenericSetupViewModel<>)); }); }); However this results in me always getting a GenericSetupViewModel and never the ContractSetupViewModel. I dont want to have to specify all specific viewmodels so is there anyway i can get this scan to work ?

    Read the article

  • NMock2.0 - how to stub a non interface call?

    - by dferraro
    Hello, I have a class API which has full code coverage and uses DI to mock out all the logic in the main class function (Job.Run) which does all the work. I found a bug in production where we werent doing some validation on one of the data input fields. So, I added a stub function called ValidateFoo()... Wrote a unit test against this function to Expect a JobFailedException, ran the test - it failed obviously because that function was empty. I added the validation logic, and now the test passes. Great, now we know the validation works. Problem is - how do I write the test to make sure that ValidateFoo() is actually called inside Job.Run()? ValidateFoo() is a private method of the Job class - so it's not an interface... Is there anyway to do this with NMock2.0? I know TypeMock supports fakes of non interface types. But changing mock libs right now is not an option. At this point if NMock can't support it, I will simply just add the ValidateFoo() call to the Run() method and test things manually - which obviously I'd prefer not to do considering my Job.Run() method has 100% coverage right now. Any Advice? Thanks very much it is appreciated. EDIT: the other option I have in mind is to just create an integration test for my Job.Run functionality (injecting to it true implementations of the composite objects instead of mocks). I will give it a bad input value for that field and then validate that the job failed. This works and covers my test - but it's not really a unit test but instead an integration test that tests one unit of functionality.... hmm.. EDIT2: IS there any way to do tihs? Anyone have ideas? Maybe TypeMock - or a better design?

    Read the article

  • How can I automatically elevate a COM interface used for automation?

    - by Jim Flood
    I have a Windows service built with ATL to expose a LocalServer32 COM interface for a set of admin commands used for configuring the service, and these can be used from VBScript for example: Set myObj = WScript.CreateObject("MySvc.Administrator") myObj.DoSomething() I want DoSomething to run elevated, and I would like the UAC prompt to come up automatically when this is called by the VBScript. Is this possible? I know I can run the script in an elevated command shell, and that I can use objShell.ShellExecute WScript.FullName, Chr(34) & WScript.ScriptFullName & Chr(34), vbNullString, "runas" for example, to run the VBScript itself elevated, and either of those work fine -- the COM method finds itself elevated. However, AFAIK getting an elevated Explorer window on the desktop is convoluted (it's not as simple as right-clicking Start/Accessories/Windows Explorer/Run as Administrator, which doesn't actually elevate.) I want a user in the local admin group to be able to drag-and-drop files and folders onto the script, and then have the script call the admin COM interface with those pathnames as arguments. (And I am hoping for something simpler than monkeying around with the args and using ShellExecute "runas".) I've tried setting UAC Execution Level to requireAdministrator in the service EXE's manifest, and setting Elevated/Enabled = 1 and LocalizedString in the registry for the MySvc.Administrator class, and these don't do the trick.

    Read the article

  • Java - Call to start method on thread : how does it route to Runnable interface's run () ?

    - by Bhaskar
    Ok , I know the two standard ways to create a new thread and run it in Java : 1 Implement Runnable in a class , define run method ,and pass an instance of the class to a new Thread. When the start method on the thread instance is called , the run method of the class instance will be invoked. 2 Let the class derive from Thread, so it can to override the method run() and then when a new instance's start method is called , the call is routed to overridden method. In both methods , basically a new Thread object is created and its start method invoked. However , while in the second method , the mechanism of the call being routed to the user defined run() method is very clear ,( its a simple runtime polymorphism in play ), I dont understand how the call to start method on the Thread object gets routed to run() method of the class implementing Runnable interface. Does the Thread class have an private field of Type Runnable which it checks first , and if it is set then invokes the run method if it set to an object ? that would be a strange mechanism IMO. How does the call to start() on a thread get routed to the run method of the Runnable interface implemented by the class whose object is passed as a parameter when contructing the thread ?

    Read the article

  • How do i access EJB implementing remote interface in separate web application?

    - by Nitesh Panchal
    Hello, I am using Netbeans 6.8 and Glassfish v3.0. I created an ejb module and created entity classes from database and then created stateless session bean with remote interface. Say eg. @Remote public interface customerRemote{ public void add(String name, String address); public Customer find(Integer id); } @Stateless public class customerBean implements customerRemote{ //implementations of methods } Then i created a new web application. But now how do i access remote ejb's in my web application. I could lookup a bean with jndi name but what i want to know is, what type of object it will return? How do i typecast it in customerRemote? I don't have any class named customerRemote in my web application. So, how do i do it? Also, what about the entity class Customer? There is no such class named Customer in my web application also. All ejb's and entity classes are in separate ejb module. Please help me :(

    Read the article

  • How do I put all the types matching a particular C# interface in an IDictionary?

    - by Kevin Brassen
    I have a number of classes all in the same interface, all in the same assembly, all conforming to the same generic interface: public class AppleFactory : IFactory<Apple> { ... } public class BananaFactory : IFactory<Banana> { ... } // ... It's safe to assume that if we have an IFactory<T> for a particular T that it's the only one of that kind. (That is, there aren't two things that implement IFactory<Apple>.) I'd like to use reflection to get all these types, and then store them all in an IDictionary, where the key is typeof(T) and the value is the corresponding IFactory<T>. I imagine eventually we would wind up with something like this: _map = new Dictionary<Type, object>(); foreach(Type t in [...]) { object factoryForType = System.Reflection.[???](t); _map[t] = factoryForType; } What's the best way to do that? I'm having trouble seeing how I'd do that with the System.Reflection interfaces.

    Read the article

  • Can AutoMapper create a map for an interface and then map with a derived type?

    - by TheCloudlessSky
    I have an interface IFoo: public interface IFoo { int Id { get; set; } } And then a concrete implementation: public class Bar : IFoo { public int Id { get; set; } public string A { get; set; } } public class Baz : IFoo { public int Id { get; set; } public string B { get; set; } } I'd like to be able to map all IFoo but specifying their derived type instead: Mapper.CreateMap<int, IFoo>().AfterMap((id, foo) => foo.Id = id); And then map (without explicitly creating maps for Bar and Baz): var bar = Mapper.Map<int, Bar>(123); // bar.Id == 123 var baz = Mapper.Map<int, Baz>(456); // baz.Id == 456 But this doesn't work in 1.1. I know I could specify all Bar and Baz but if there are 20 of these, I'd like to not have to manage them and rather just have what I did above for creating the map. Is this possible?

    Read the article

  • How to change the language of driver interface for Canon Pixma printers?

    - by Sammy
    Is there a way to change the language of the driver interface for Canon Pixma printers? Which language is used seems to be determined by the language of the OS or the Windows localization settings. I really don't want that, I want to be able to set the language manually to my own liking, either during the driver installation or afterwards. I have found a workaround for Pixma IP2770 where you edit the setup.ini file by replacing the language names and the DLL search paths with <SELECT> under the LANGUAGES section. So instead of... 0000=<SELECT> 0001=Arabic,RES\STRING\IJInstAR.ini,RES\DLL\IJInstAR.dll 0804=Simplified Chinese,RES\STRING\IJInstCN.ini,RES\DLL\IJInstCN.dll 0404=Traditional Chinese,RES\STRING\IJInstTW.ini,RES\DLL\IJInstTW.dll 0005=Czech,RES\STRING\IJInstCZ.ini,RES\DLL\IJInstCZ.dll 0006=Danish,RES\STRING\IJInstDK.ini,RES\DLL\IJInstDK.dll 0007=German,RES\STRING\IJInstDE.ini,RES\DLL\IJInstDE.dll 0008=Greek,RES\STRING\IJInstGR.ini,RES\DLL\IJInstGR.dll 0009=English,RES\STRING\IJInstUS.ini,RES\DLL\IJInstUS.dll 000A=Spanish,RES\STRING\IJInstES.ini,RES\DLL\IJInstES.dll 000B=Finnish,RES\STRING\IJInstFI.ini,RES\DLL\IJInstFI.dll 000C=French,RES\STRING\IJInstFR.ini,RES\DLL\IJInstFR.dll 000E=Hungarian,RES\STRING\IJInstHU.ini,RES\DLL\IJInstHU.dll 0010=Italian,RES\STRING\IJInstIT.ini,RES\DLL\IJInstIT.dll 0011=Japanese,RES\STRING\IJInstJP.ini,RES\DLL\IJInstJP.dll 0012=Korean,RES\STRING\IJInstKR.ini,RES\DLL\IJInstKR.dll 0013=Dutch,RES\STRING\IJInstNL.ini,RES\DLL\IJInstNL.dll 0014=Norwegian,RES\STRING\IJInstNO.ini,RES\DLL\IJInstNO.dll 0015=Polish,RES\STRING\IJInstPL.ini,RES\DLL\IJInstPL.dll 0016=Portuguese,RES\STRING\IJInstPT.ini,RES\DLL\IJInstPT.dll 0019=Russian,RES\STRING\IJInstRU.ini,RES\DLL\IJInstRU.dll 001D=Swedish,RES\STRING\IJInstSE.ini,RES\DLL\IJInstSE.dll 001E=Thai,RES\STRING\IJInstTH.ini,RES\DLL\IJInstTH.dll 001F=Turkish,RES\STRING\IJInstTR.ini,RES\DLL\IJInstTR.dll 0021=Indonesian,RES\STRING\IJInstID.ini,RES\DLL\IJInstID.dll You get.... 0000=<SELECT> 0001=<SELECT> 0804=<SELECT> 0404=<SELECT> 0005=<SELECT> 0006=<SELECT> 0007=<SELECT> 0008=<SELECT> 0009=English,RES\STRING\IJInstUS.ini,RES\DLL\IJInstUS.dll 000A=<SELECT> 000B=<SELECT> 000C=<SELECT> 000E=<SELECT> 0010=<SELECT> 0011=<SELECT> 0012=<SELECT> 0013=<SELECT> 0014=<SELECT> 0015=<SELECT> 0016=<SELECT> 0019=<SELECT> 001D=<SELECT> 001E=<SELECT> 001F=<SELECT> 0021=<SELECT> .... in case English is the preferred language. It's a way to force the installation program to only install the English language support. IP2770 is a model for the Asian market, so if you want to check this out you need to go to the Canon India download page (for instance) to get the driver. Unfortunately this method is not possible with my IP4000. There is no driver even available for it to download for Windows Vista. But is there really no way of changing the language of the UI in any normal way, you know... without having to hack it? Besides, the driver for my printer comes with Windows Vista, so I don't even have to install any drivers. And little do I get the chance to set the language, knowing that the installation never happens. Any ideas?...

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >