Search Results

Search found 4824 results on 193 pages for 'sandeep k ram'.

Page 160/193 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• Will Intel be releasing anymore 6-core processors soon?

  - by jasondavis

  I am about to start buying parts every week for as long as it takes me to build the best PC I can build. I am looking at the Intel i7-920 processor right now because it is about 250$ and it is a quad-core processor based on the x58 chipset I believe. From what I have read so far, intel is coming out with some 6-core processors soon that will also use the x58 chipset and will allow me to use the same motherboard and memory/ram to upgrade to a 6-core. This sounds really good to me right now. I just read that the new 6-core processor. The Core i7-980X (extreme edition) was just released which is the first 6-core processor but it is supposed to be around $1,000 so I will probably just get the i7-920 for now and then upgrade to the 6-core version when the price goes down. The motherboard I am looking at getting the GIGABYTE GA-X58A-UD5 which is around $280 at newegg.com So that is my basic plan SO far. I have not purchased any parts yet. I am just wanting to ask if this sounds like a good idea or if I should wait longer if I am wanting to eventually have a 6-core processor. Does anyone know if Intel is planning on releasing any other 6-core processor in addition to the Core i7-980X in the near future? I just want to make sure I am buying the best setup for my money if I am going all out on it, thanks for any tips/advice.

  Read the article

• How do I compile DarWINE in PowerPC Mac OS X 10.4.11...?

  - by Craig W. Davis

  So far I've tried using MacPorts which gives me this error: /Error: Cannot install wine for the arch(s) 'powerpc' because Error: its dependency pkgconfig is only installed for the archs 'i386 ppc'. Error: Unable to execute port: architecture mismatch To report a bug, etc... (I'm not allowed to post two links due to being a new poster...)./ I've also tried using the build script I found in the DarWINE 0.9.12 SDK download that I found on the DarWINE SourceForge.net Project Page... I've also tried the build script that I found at http://code.google.com/p/osxwinebuilder/#Building_Wine_via_the_script... None of these attempts to build DarWINE have actually worked. Whenever I build using the DarWINE build script I run it as follows: /1. I decompress the WINE tarball into ~/Downloads/WINE 2. I cd into ~/Downloads/DarWINE. 3. I run ./winemaker ~/Downloads/WINE/wine-1.2.2 or ./winemaker ~/Downloads/WINE/wine-1.2-rc2 (the reason for trying WINE 1.2-rc2 is that some people managed to get it to build on PowerPC Macs running 10.5.8...)./ I made sure to install Xcode Tools 2.5 & all the SDKs too... The net result is either a syntax type error resulting from trying to run the checked out Google Code DarWINE build script or a bunch of make errors when trying to run the official DarWINE build script that I forcefully extracted from the DarWINE 0.9.12 SDK .dmg file by using Pacifist. I trying to build DarWINE on mid-April 2006 1.42 GHz eMac with DL SuperDrive with Bluetooth 2.0+EDR with 2 GBs of RAM running 10.4.11 as I mentioned earlier... (it came with 10.4.4 on the Mac's Restore DVD-ROM that I ordered from 1-800-SOS-APPL & coconutIdentityCard told me it was made on April 12th 2006 & I know that's right because when I reinstalled Mac OS X 10.4.4 it displayed that it was registered/previously owned by a Hawaiian school...): /make[1]: winegcc: Command not found make[1]: * [main.o] Error 127 make: * [dlls/acledit] Error 2./

  Read the article

• I can't connect to my network, except in safe mode

  - by eidylon

  My laptop cannot connect to my network all of a sudden except in safe mode. When it boots, it will show the networks available in the tray popup, but if I click connect on any, it says "Unable to connect" and the troubleshooter is useless. Shortly thereafter all the networks disappear. I have tried removing IPv6 support as I have seen that cause problems. No joy. I've also tried removing the wireless network adapter in Device Manager and reinstalling it, also no joy. I've also tried attaching a USB wireless adapter, and it has the same problem. If I boot in safe mode, then it has no problems at all. Three other devices in the house connect fine, so I am pretty sure it is nothing to do with the router. Any ideas what to check next? I am running Win7 Ultimate on a 2GHz Quadcore with 8GB RAM with a Broadcom 802.11n wireless card. EDIT: RE wired connections: What is very weird is that if i plug in a wired connection, then not only does it connect via the wired connection, but the wireLESS also starts working perfectly. And a soon as I unplug the wire, then the wireLESS stops working again! So it seems the wireless is right now working only in safe-mode, or when a wired connection is also plugged in.

  Read the article

• The bottlenecks of any computer, what to look for?

  - by WebDevHobo

  Whether it is a laptop or a desktop, any computer is made up of several pieces of hardware that communicate with each other. Sending data back and forth to ensure that the user gets the desired results. I have seen some theoretical stuff on computers & hardware, but I wonder how it all comes together. CPU RAM Graphics Card L1 CACHE L2 CACHE L3 CACHE FSB ... And all other things. Which is the biggest bottle neck? Why would a person not want/need a big value in one of those categories in certain situations? P.S.: when reading the specs of the i5 750 processor, I came across this description: In place of the FSB, one or more high speed, point-to-point buses called Quick Path Interconnect (QPI) are used, formerly known as Common Serial Interconnect Bus or CSI. QPI features higher bandwidth than the traditional FSB and is better suited to system scaling. What is this, and how does it compare to FSB? EDIT: I am not planning to buy a computer at all. The goal of this question is to understand the internal relation of various hardware pieces, their specific functions and how they work together. For instance, I have heard to a somewhat higher-than-usual amount of L2/L3 Cache can help speed up your computer. What's up with saying that? Also I forgot to mention Hard-disk RPM.

  Read the article

• How to diagnose website performance/app pool recycling with Windows 2008/IIS7

  - by ilasno

  Ok, so there are various symptoms here (clients and and our own employees complaining of intermittent slowdowns, getting 'kicked out' to login page or just having a save request not properly save the submitted data). The environment: Windows Server 2008 (Datacenter), Service Pack 2, 64-bit, 2x2.8 GHz processors, 7.5 GB RAM MS SQL Server 2008 (running on the same machine) IIS 7 There are ~10 websites running on the server, each in their own application pool - most of these pools are running in Integrated mode, 2 are in Classic, all are on .NET 2.0 and all run as ApplicationPoolIdentity. I'm trying to analyze, diagnose, and troubleshoot and am struggling with where to get more info about what could be happening. Here are some steps i have already taken: Set each application pool to recycle once per day, and removed any other automatic recycling Set a Virtual Memory Limit for each to 1024000KB (1GB) Enabled ALL 'Generate Recycle Event Log Entry' entries (Config Changes, Isapi Reported Unhealthy, Manual Recycle, Private Memory Limit Exceeded, Regular Time Interval, Request Limit Exceeded, Specific Time, Virtual Memory Limit Exceeded) I have seen the app pool processes recycle (in Task Manager) - a new one will start up, and then the first one dies off - and this has happened without the memory or time going over the settings. This is a fairly new server, and most of these came from Windows Server 2003/IIS6. Any 'next steps' for setting up information gathering, logging, diagnosing, etc. would be much appreciated! j

  Read the article

• SQL Server 2008 second instance times out when logging in -- but only the first time?

  - by Kromey

  This is a strange one that has plagued me for a while now. When logging in to the second instance of SQL Server 2008 on one of our database servers, we get a timeout error: Cannot connect to servername\mssqlserver2. Additional information: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server)") (This is the error message when trying to connect with Microsoft SQL Server Management Studio; other tools experience the same error, but of course say it in different ways.) Immediately re-attempting to log in works just fine, so whatever the cause it's ephemeral! This happens regardless of user or authentication type (both Windows and SQL Server authentication methods are supported on this instance). What's even weirder, though, is that the first instance on this server has never once demonstrated this problem. Server is a Windows Server 2008 R2 virtual server, hosted in Microsoft Hyper-V (host is likewise Server 2008 R2). The server has 2GB of RAM, and seems to regularly be using 90% of that -- could low memory be the cause of this issue? I could see this second instance -- which is not used very often yet -- being swapped out to disk, and then taking too long to load back into memory to respond in time to the connection request, but I'd rather have more than just my own hunch before I go scheduling a downtime for this server (the first instance is used regularly) and then just throwing extra resources at it in the blind hope that the problem goes away.

  Read the article

• SSRS2008R2 report times out, but the underlying query executes in the Management Studio

  - by Matthew Belk

  A customer of mine recently moved servers and the new server has SQL2008R2. His old server was SQL2005. The new server has substantially better CPU, RAM, and disk performance than the old, but several reports time out while executing. When I run the underlying query in the SQL Management Studio, the query executes in sub-second time. The exact error message returned via the Report Manager UI is: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. It must be noted that this database is not just analytical; it's also fairly transactional, although the transaction volume is not exceptionally high. What can I do to improve the performance of the SSRS query engine? Are there settings in the data source I can adjust, or in the SSRS config files?

  Read the article

• Somewhat powerful server needed for computationally expensive stuff

  - by Dane Larsen

  So here's my problem. My Dad runs a company that does some rather computationally expensive stuff. This is not supercomputer level stuff, but it does take several hours to run the average job on his Core i7 desktop. He asked me to look into a way to have his customers use the code on an hourly basis, namely via a server. Ideally he'd be able to buy a box for about $1000, and hook it right up to our home connection. Unfortunately, the data that needs to be both sent and received is on the order of several hundred megs. We live in a rural area, and the fastest connection offered is 1.5Mbit/s. Download. It's like .3Mbit/s upload. Not workable. What are the options for this kind of thing? Ideally, we'd have about 2GB of ram, 300-500GB of storage, and a nice dual core, and it has to run some flavor of Linux. Any suggestions? Thanks in advance EDIT: Also, ideally the monthly price would be < $100 per month.

  Read the article

• Win 7: apps crash, then explorer crashes, then services fail, then boom

  - by snorfys

  Periodically, every 2-3 days one of my systems will go haywire: every app will crash search will fail via the start menu and then explorer will fail. Restarting explorer via taskmanager will cause it to fail again, then it'll BSOD and restart. The eventlog for when this happens goes something like this every time: ERROR: Session "ReadyBoot" stopped due to the following error: 0xC0000188 (supposedly not a problem) WARNING: The maximum file size for session "ReadyBoot" has been reached... (forget where I found out, but also 'not a problem') ERROR: Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188 (again, supposedly not a problem) WARNING: The maximum file size for session "Circular Kernel Context Logger" has been reached... ERROR: Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: explorer.exe, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: svchost.exe_iphlpsvc, version: 6.1.7600.16385, time stamp:... ERROR: The Service Name service terminated unexpectedly. It has done this 1 time(s) That last one happens a number of times but with a different service name. Then finally we have: ERROR: The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error: An instance of the service is already running. After that, I have my BSOD and logs complaining that windows started up without shutting down. It's a new machine: Intel i3 530 4gb RAM (Ran memtest for 4 hrs, no problems) 320GB WD/250GB Seagate HDDs (Happened on fresh installs on 2 separate HDDs) Win7 Pro/Ultimate x64 (wife's copy of pro, my copy of ult, no change) Fresh install + driver and windows update (happened without updates as well) I'm at a bit of a loss as to what I can look at next. Especially since it'll work like a charm for 2-3 days and then it's hooped for a night (I'm on it now in fact - no problems).

  Read the article

• Best way to attach 96 tb to workstation

  - by user994179

  I'm running a workstation with dual xeon 5690's (12 physical/24 logical cores), 192 gb of ram (ie, maxed-out), Windows 7 64bit, 5 slots for adapter cards, and 1 tb of internal storage, with 5 more internal bays available. I have an app that creates data files totaling about 88 tbs. These are written once every 14 months, and the rest of the time the app only needs to read them; and 95% of the reads are sequential reads of huge chunks of data. I have some control over how big the individual files are, but ideally they would be between 5 and 8 tbs. The app will be reading from only one drive at a time, and the nature of the data is such that if (when) a drive dies I can restore the data to a new disk from tape. While it would be nice to be able to use the fastest drive/controllers available, at this point size matters more than speed. After doing lots of reading, I am leaning toward buying a bunch of cheap 2tb drives and putting them into a bunch of cheap enclosures. All this stuff is going into my home office, so I need to avoid the raised floor/refrigerated approach. My questions: Is the cheap drive/enclosure solution the best one for this situation? Given the nature of the app and the way the data is used, does RAID make sense? If so, which one? For huge sequential reads, would Usb 3.0 and eSata be a wash performance-wise? For each slot available on the workstation, can I hook up an enclosure that can hold multiple drives? Or is it one controller per drive? If I can have multiple drives on one controller, am I essentially splitting the bandwidth (throughput)? For example, if I have a 12 bay enclosure, is the throughput of the controller reduced by a factor of 12? Are there any Windows 7 volume/drive/capacity limits I should be aware of? Thanks

  Read the article

• Setting kernel memory for installing postgresql

  - by Matthieu Taymans

  My question is about setting the kernel shared memory for installing postgresql on mac osx 10.6.8. In the readme file of postgresql it is said: Shared Memory PostgreSQL uses shared memory extensively for caching and inter-process communication. Unfortunately, the default configuration of Mac OS X does not allow suitable amounts of shared memory to be created to run the database server. Before running the installation, please ensure that your system is configured to allow the use of larger amounts of shared memory. Note that this does not 'reserve' any memory so it is safe to configure much higher values than you might initially need. You can do this by editting the file /etc/sysctl.conf - e.g. % sudo vi /etc/sysctl.conf On a MacBook Pro with 2GB of RAM, the author's sysctl.conf contains: kern.sysv.shmmax=1610612736 kern.sysv.shmall=393216 kern.sysv.shmmin=1 kern.sysv.shmmni=32 kern.sysv.shmseg=8 kern.maxprocperuid=512 kern.maxproc=2048 Note that (kern.sysv.shmall * 4096) should be greater than or equal to kern.sysv.shmmax. kern.sysv.shmmax must also be a multiple of 4096. Once you have edited (or created) the file, reboot before continuing with the installation. If you wish to check the settings currently being used by the kernel, you can use the sysctl utility: % sysctl -a The database server can now be installed. I'm a real beginner with all this but need to instal postgresql for academic purposes do you know how i can set this kernel shared memory. Won't that be harmful for my system? Thank you in advance. Matthieu

  Read the article

• How can I know if a replacement display is compatible with my laptop?

  - by moraleida

  I have an Acer Aspire 4810TZ from 2010 which I truly love - it's a 3 year old notebook that still carries on for about 5 to 6h straight off the battery. I've also invested in it with an SSD and extra RAM and it's fine for my use right now. I'd really rather not just dump it. Now... its screen is dead and I'm looking for replacement parts, but it turns out to be a kind of expensive display - AUO B140XW02 14" LED. US$ 125 was the cheapest I found here (Rio de Janeiro, Brazil). The official dealer sells them for US$ 175. I'm aware of How do I know if a LCD is compatible with my Laptop? and Can I replace a laptop screen with one of a different resolution? but the answers don't really help me in this case. Also Replacing an LCD screen in a laptop gives me a hint but I'm completely dumb at hardware so this is why i'm asking: Is it possible to buy an LCD or a lower grade LED screen with the same connectors? What characteristics should I look for to find out if a certain display is compatible?

  Read the article

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro to watch TV and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing TV okay (with the new DirecTV) before I tried to run setup. (I ran setup to try to do recording with Media Center.) Hardware/Software: Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Windows 7 - svchost high cpu usage.

  - by Leonardo

  Hey guys! I'm having a problem with windows 7 x64 i though it was slow and all then i saw that the cpu usage was always around 80% and started digging through google. there's two svchost consuming around 30% each and in the resources monitor there's a system interrupts consuming 45% all the time, i trid closing the aplications and makes no diference. so i tried some other things that i've found on gloogle like disable system update but didn't work. i'd love some help here. i don't know if it will help but here's my specs: Core 2 duo 4400 ATI radeon 4850 4gb ram DDR2 thanks anyway for your attention :) EDIT So i run the program and i got this info, did i get it right? EDIT As you asked here it is, did i get it right now? the other tcp/ip there's nothing. thanks again! :D EDIT I tried somthing here, i run msconfig and took the services that one of the svchost was using out of the startup and now my cpu is around 50%, but i still would like to make this better, i can't lose that much cpu power just because windows... thanks. EDIT yeah there's nothing i can do here, going to install xp for a while, it's really weird...

  Read the article

• Performance experiences for running Windows 7 on a Thin-Client?

  - by Peter Bernier

  Has anyone else tried installing Windows 7 on thin-client hardware? I'd be very interested to hear about other people's experiences and what sort of hardware tweaks they had to do to get it to work. (Yes, I realize this is completely unsupported.. half the fun of playing with machines and beta/RC versions is trying out unsupported scenarios. :) ) I managed to get Windows 7 installed on a modified Wyse 9450 Thin-Client and while the performance isn't great, it is usable, particularly as an RDP workstation. Before installing 7, I added another 256Mb of ram (512 total), a 60G laptop hard-drive and a PCI videocard to the 9450 (this was in order to increase the supported screen resolution). I basically did this in order to see whether or not it was possible to get 7 installed on such minimal hardware, and see what the performance would be. For a 550Mhz processor, I was reasonably impressed. I've been using the machine for RDP for the last couple of days and it actually seems slightly snappier than the default Windows XP embedded install (although this is more likely the result of the extra hardware). I'll be running some more tests later on as I'm curious to see particularl whether the streaming video performance will improve. I'd love to hear about anyone's experiences getting 7 to work on extremely low-powered hardware. Particularly any sort of tweaks that you've discovered in order to increase performance..

  Read the article

• Windows XP over two monitors, but one of them switches off at boot... how to fix? How to switch bac

  - by jae

  When booting into XP (x64, Athlon II X2 245, 4GB RAM), my main monitor (got two 19" TFTs hooked up, two gfx cards, a 4650 (1GB, the primary monitor's on this) and a 4350 (512MB)) switches off. Logging in blind (cursor down key, typing password) gets me one screen, the secondary. Booted correctly until about two days ago. No clue what's the cause, last change was (if I don't overlook something) installing the ATI 9-12 hotfix. And booting into Windows 7, after returning from 7, it was like this. For some weird reason, I cannot start Catalyst Control Center (I right-click desktop, choose the CCC entry, the pointer changes to hourglass for a half-second... and nothing. Likewise with "Properties"... I think, as all windows open on the primary (off) screen, and no entry appears in the task bar for Properties) Completely stumped. Windows 7, same setup, works w/o a hitch. The primary monitor appears to run in some unknown, but pretty low, resolution, as the mouse pointer only moves onto it at about half-height. But, w/o CCC or display properties, I cannot check. And, obviously, not change anything. Hope this was not too long-winded. And I'm sure I still forgot essential stuff. :P

  Read the article

• No headphone or speakers plugged in - Windows 7 issue

  - by Amit Ranjan

  I am facing a wierd issue between my sound card driver and Windows7(any edition). I have a sony vaio notebook (VPCEB24EN). Two days ago, on start I got diabled wifi, charging and speakers. Then I restart the PC and everthing worked fine. Later on I again restarted my machine, and then I found the my speakers were not working. I thought, restart will work. I restarted many more times but it did'nt work. I searched google and found that , it might be due to : 1. Hardware is not switched on from bios. 2. No hardware. 3. overriding 64-bit drivers with 32-bit drivers. To make it working, I restored my laptop from scratched, but while restoring pc, the realtek HD drivers, it gave me an error 505. I then formatted the drive and installed Win7 Ultimate 32bit (With PC was, Win7 64-bit Home Basic). I got lots of yellow exclamation in device manager, thinking now this will resolve my issue. But Even after the installing all drivers on a fresh installation, I was still with the same position. A red cross on speaker- No Speakers or Headphone plugged in. Please Note: My Laptop is Vaio , E Series, VPCEB24EN. Audio : Intel® High Definition Audio compatible but accepts Realted Audio. While using BIOS Agent, I got Intel Chipset 5 Series Audio Adapter and ATI RV370 Audio adapter found on my board. Installed is Win7 32bit Ultimate. factory default was Win7 64-bit Home Basic Memory: RAM 3GB/ 320GB HDD Display : ATI Mobility Radeon™ HD 5145 Graphics

  Read the article

• Expanding to dual video cards

  - by Anthony Greco

  I know a lot of factors can go into play here, so I will list my current hardware and setup: MOBO: GIGABYTE GA-890FXA-UD5 [http://www.newegg.com/Product/Product.aspx?Item=N82E16813128441] Processor: AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz [http://www.newegg.com/Product/Product.aspx?Item=N82E16819103849] Ram: G.SKILL Ripjaws Series 16GB (4 x 4GB) [https://secure.newegg.com/NewMyAccount/OrderHistory.aspx?RandomID=4933910872745320111128011418] Current video card: EVGA 01G-P3-1366-TR GeForce GTX 460 SE [http://www.newegg.com/Product/Product.aspx?Item=N82E16814130591] OS: Windows 7 Ultimate x64 Currently I can run 2 monitors just fine in my setup. However, I want to upgrade this to 4 monitors. My question is, what is the best way to do this? I remember in the past reading I need the same type of video card, however would any GeForce GTX work, or do i need that very specific model (EVGA 01G-P3-1366-TR GeForce GTX 460 SE)? Are there any issues I should be aware of before I order 2 new monitors and a video card? Are there video cards better setup for this? I know NVidia offers SLI, however I do not know if my mobo is compliant. My mobo also offers CrossFireX configuration, though from what it says only Radeon are compliant. Any suggestions / feedbacks on my best route with my current setup is appreciated. Even if you suggest buying 2 new identical video cards, as long as you can mention which and why that is better I really appreciate it. Note: I really do not do any gaming. I sometimes do some 3D work in Unity and very rarely in Maya. Besides that I mostly do all my computer work in Visual Studios and Photoshop. I however need the 2 extra monitors because I monitor sometimes 5 remote desktops at once and switching on only 2 is becoming a very big pain. Also seeing 3 side by side while I work on the 4th will be very helpful. Again, I appreciate any feedback, as I have googled a bunch and just want to make sure what I buy will work.

  Read the article

• Black Screen on Logon (windows 7 home premium)

  - by Blacknight334

  i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

  Read the article

• Dual Monitor setup issues between laptop and external led monitor

  - by Julian

  I have two challenges. Monitor will not connect to laptop through HDMI Watching HD video content causes the laptop to sometimes turn off expecially when I'm streaming from tekzilla.com Setup. I got my new HP 2311x LED LCD monitor this week and I have it running as the main monitor extended by the 15 inch screen on my Dell Studio 1558. Right now I have to connect the external monitor through VGA. For the HDMI connection issue. I suspect that either the appropriate drivers are not installed because I don't see any hdmi device in the device manager. I've checked and I don't see any hdmi specific drivers listed online. For the shut down issue, I suspect the laptop might be overheating. Not sure why it would. It never did that while I watched movies on my laptop's default screen. My Laptop Configuration: 15" led lcd screen at 1366 x 768 intel i5 processor integrated graphics card 4 GB DDR3 RAM 500 GB hard drive I've tried everything from switching the source on my monitor to hdmi to start up combinations and nothing has worked. What could be the issue and how do I solve it?

  Read the article

• flowchart for debugging a slow/unresponsive server

  - by davidosomething

  So the server is slow: Roll back to the previous known working build - Success? Code problem - Fail? Go on. Ping ip address - Success? maybe a DNS problem, go on. - Fail? Server or connection problem, go on. Ping and tracert your domain.com from inside your network - previous success - fail: DNS problem - success? go on. - previous fail and: - Fail? Go on, could be you or network. - Success? Go on. Try it from outside your network (http://centralops.net/co/) - Fail? The server's network connection sucks. - Success? If inside network was fail, your network sucks. Check the server load: CPU/RAM usage. Is it overloaded? - Yes. Who's the culprit? Kill some processes/reboot. - No? Go on. what other steps should i add?

  Read the article

• RHEL 5.2 installing on ProLiant BL460c - hangs at 'now booting the kernel'

  - by Dr Rocket Mr Socket

  As the title states, I have a problem. This server and the installation disc are also on the other side of the world to me so... So far, I have tried to start the install with the parameters: linux text noapic noacpi no=apic no=acpi which results in the same hang. I have also disabled a PCI ethernet adapter, I am uneasy about disabling the onboard ethernet adapter I do not know if ILO uses this. Anyone have any advice? Much appreciated. EDIT: full output after trying to begin the installation. boot: linux text Loading initrd.img.................. Loading vmlinuz....... Uncompressing Linux...done. Now booting the kernel stays on this for hours EDIT2: adding the 'mem=40960M' (server has 40 gigs of ram) parameter allows it to proceed but the following output directly after 'Now booting the kernal' Memory: sized by int13 0e801h initrd extends beyond end of memory (0x00ef2090 > 0x00000000) disabling initrd Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory Structure at 0x000ffee0 pcibios_init : BIOS32 Service Directory entry at 0xf0000

  Read the article

• windows xp blue screen dumping physical memory

  - by dotnet-practitioner

  I get following blue screen after running my laptop for an hour... A problem has been detected and windows has been shut down to prevent damange to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as cashing or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and the select safe mode. Technical Information: * STOP 0x0000008E (0xc0000005, 0x805B03F5, 0xF703DC7C, 0x00000000) Beginning dump of physical memory Physical memory dump complete. Contact you system administrator or technical support group for further assistance. so.... if this is a faulty memory.... from where I could buy RAM for following laptop.... TOSHIBA SATELLITE A45-S250 My local Frys store does not carry memory for this laptop.

  Read the article

• Four disks - RAID 10 or two mirrored pairs?

  - by ewwhite

  I have this discussion with developers quite often. The context is an application running in Linux that has a medium amount of disk I/O. The servers are HP ProLiant DL3x0 G6 with four disks of equal size @ 15k rpm, backed with a P410 controller and 512MB of battery or flash-based cache. There are two schools of thought here, and I wanted some feedback... 1). I'm of the mind that it makes sense to create an array containing all four disks set up in a RAID 10 (1+0) and partition as necessary. This gives the greatest headroom for growth, has the benefit of leveraging the higher spindle count and better fault-tolerance without degradation. 2). The developers think that it's better to have multiple RAID 1 pairs. One for the OS and one for the application data, citing that the spindle separation would reduce resource contention. However, this limits throughput by halving the number of drives and in this case, the OS doesn't really do much other than regular system logging. Additionally, the fact that we have the battery RAID cache and substantial RAM seems to negate the impact of disk latency... What are your thoughts?

  Read the article

• Hardware issue: computer plays beep sounds at startup, and then turns off

  - by Darkkurama

  Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >