Search Results

Search found 9118 results on 365 pages for 'chris power'.

Page 162/365 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Identify SATA hard drive

  - by Rob Nicholson

  Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

  Read the article

• Strange behavior with gcc inline assembly

  - by Chris

  When inlining assembly in gcc, I find myself regularly having to add empty asm blocks in order to keep variables alive in earlier blocks, for example: asm("rcr $1,%[borrow];" "movq 0(%[b_],%[i],8),%%rax;" "adcq %%rax,0(%[r_top],%[i],8);" "rcl $1,%[borrow];" : [borrow]"+r"(borrow) : [i]"r"(i),[b_]"r"(b_.data),[r_top]"r"(r_top.data) : "%rax","%rdx"); asm("" : : "r"(borrow) : ); // work-around to keep borrow alive ... Another example of weirdness is that the code below works great without optimizations, but with -O3 it seg-faults: ulong carry = 0,hi = 0,qh = s.data[1],ql = s.data[0]; asm("movq 0(%[b]),%%rax;" "mulq %[ql];" "movq %%rax,0(%[sb]);" "movq %%rdx,%[hi];" : [hi]"=r"(hi) : [ql]"r"(ql),[b]"r"(b.data),[sb]"r"(sb.data) : "%rax","%rdx","memory"); for (long i = 1; i < b.size; i++) { asm("movq 0(%[b],%[i],8),%%rax;" "mulq %[ql];" "xorq %%r10,%%r10;" "addq %%rax,%[hi];" "adcq %%rdx,%[carry];" "adcq $0,%%r10;" "movq -8(%[b],%[i],8),%%rax;" "mulq %[qh];" "addq %%rax,%[hi];" "adcq %%rdx,%[carry];" "adcq $0,%%r10;" "movq %[hi],0(%[sb],%[i],8);" "movq %[carry],%[hi];" "movq %%r10,%[carry];" : [carry]"+r"(carry),[hi]"+r"(hi) : [i]"r"(i),[ql]"r"(ql),[qh]"r"(qh),[b]"r"(b.data),[sb]"r"(sb.data) : "%rax","%rdx","%r10","memory"); } asm("movq -8(%[b],%[i],8),%%rax;" "mulq %[qh];" "addq %%rax,%[hi];" "adcq %%rdx,%[carry];" "movq %[hi],0(%[sb],%[i],8);" "movq %[carry],8(%[sb],%[i],8);" : [hi]"+r"(hi),[carry]"+r"(carry) : [i]"r"(long(b.size)),[qh]"r"(qh),[b]"r"(b.data),[sb]"r"(sb.data) : "%rax","%rdx","memory"); I think it has to do with the fact that it's using so many registers. Is there something I'm missing here or is the register allocation just really buggy with gcc inline assembly?

  Read the article

• .Net Entity Framework & POCO ... querying full table problem

  - by Chris Klepeis

  I'm attempting to implement a repository pattern with my poco objects auto generated from my edmx. In my repository class, I have: IObjectSet<E> _objectSet; private IObjectSet<E> objectSet { get { if (_objectSet == null) { _objectSet = this._context.CreateObjectSet<E>(); } return _objectSet; } } public IQueryable<E> GetQuery(Func<E, bool> where) { return objectSet.Where(where).AsQueryable<E>(); } public IList<E> SelectAll(Func<E, bool> where) { return GetQuery(where).ToList(); } Where E is the one of my POCO classes. When I trace the database and run this: IList<Contact> c = contactRepository.SelectAll(r => r.emailAddress == "[email protected]"); It shows up in the sql trace as a select for everything in my Contact table. Where am I going wrong here? Is there a better way to do this? Does an objectset not lazy load... so it omitted the where clause? This is the article I read which said to use objectSet's... since with POCO, I do not have EntityObject's to pass into "E" http://devtalk.dk/CommentView,guid,b5d9cad2-e155-423b-b66f-7ec287c5cb06.aspx

  Read the article

• Choosing a type for search results in C#

  - by Chris M

  I have a result set that will never exceed 500; the results that come back from the web-service are assigned to a search results object. The data from the webservice is about 2mb; the bit I want to use is about a third of each record, so this allows me to cache and quickly manipulate it. I want to be able to sort and filter the results with the least amount of overhead and as fast as possible so I used the VCSKICKS timing class to measure their performance Average Total (10,000) Type Create Sort Create Sort HashSet 0.1579 0.0003 1579 3 IList 0.0633 0.0002 633 2 IQueryable 0.0072 0.0432 72 432 Measured in Seconds using http://www.vcskicks.com/algorithm-performance.php I created the hashset through a for loop over the web-service response (adding to the hashset). The List & IQueryable were created using LINQ. Question I can understand why HashSet takes longer to create (the foreach loop vs linq); but why would IQueryable take longer to sort than the other two; and finally is there a better way to assign the HashSet. Thanks Actual Program public class Program { private static AuthenticationHeader _authHeader; private static OPSoapClient _opSession; private static AccommodationSearchResponse _searchResults; private static HashSet<SearchResults> _myHash; private static IList<SearchResults> _myList; private static IQueryable<SearchResults> _myIQuery; static void Main(string[] args) { #region Setup WebService _authHeader = new AuthenticationHeader { UserName = "xx", Password = "xx" }; _opSession = new OPSoapClient(); #region Setup Search Results _searchResults = _opgSession.SearchCR(_authHeader, "ENG", "GBP", "GBR"); #endregion Setup Search Results #endregion Setup WebService // HASHSET SpeedTester hashTest = new SpeedTester(TestHashSet); hashTest.RunTest(); Console.WriteLine("- Hash Test \nAverage Running Time: {0}; Total Time: {1}", hashTest.AverageRunningTime, hashTest.TotalRunningTime); SpeedTester hashSortTest = new SpeedTester(TestSortingHashSet); hashSortTest.RunTest(); Console.WriteLine("- Hash Sort Test \nAverage Running Time: {0}; Total Time: {1}", hashSortTest.AverageRunningTime, hashSortTest.TotalRunningTime); // ILIST SpeedTester listTest = new SpeedTester(TestList); listTest.RunTest(); Console.WriteLine("- List Test \nAverage Running Time: {0}; Total Time: {1}", listTest.AverageRunningTime, listTest.TotalRunningTime); SpeedTester listSortTest = new SpeedTester(TestSortingList); listSortTest.RunTest(); Console.WriteLine("- List Sort Test \nAverage Running Time: {0}; Total Time: {1}", listSortTest.AverageRunningTime, listSortTest.TotalRunningTime); // IQUERIABLE SpeedTester iqueryTest = new SpeedTester(TestIQueriable); iqueryTest.RunTest(); Console.WriteLine("- iquery Test \nAverage Running Time: {0}; Total Time: {1}", iqueryTest.AverageRunningTime, iqueryTest.TotalRunningTime); SpeedTester iquerySortTest = new SpeedTester(TestSortableIQueriable); iquerySortTest.RunTest(); Console.WriteLine("- iquery Sort Test \nAverage Running Time: {0}; Total Time: {1}", iquerySortTest.AverageRunningTime, iquerySortTest.TotalRunningTime); } static void TestHashSet() { var test = _searchResults.Items; _myHash = new HashSet<SearchResults>(); foreach(var x in test) { _myHash.Add(new SearchResults { Ref = x.Ref, Price = x.StandardPrice }); } } static void TestSortingHashSet() { var sorted = _myHash.OrderBy(s => s.Price); } static void TestList() { var test = _searchResults.Items; _myList = (from x in test select new SearchResults { Ref = x.Ref, Price = x.StandardPrice }).ToList(); } static void TestSortingList() { var sorted = _myList.OrderBy(s => s.Price); } static void TestIQueriable() { var test = _searchResults.Items; _myIQuery = (from x in test select new SearchResults { Ref = x.Ref, Price = x.StandardPrice }).AsQueryable(); } static void TestSortableIQueriable() { var sorted = _myIQuery.OrderBy(s => s.Price); } }

  Read the article

• Scapy install issues. Nothing seems to actually be installed?

  - by Chris

  I have an apple computer running Leopard with python 2.6. I downloaded the latest version of scapy and ran "python setup.py install". All went according to plan. Now, when I try to run it in interactive mode by just typing "scapy", it throws a bunch of errors. What gives! Just in case, here is the FULL error message.. INFO: Can't import python gnuplot wrapper . Won't be able to plot. INFO: Can't import PyX. Won't be able to use psdump() or pdfdump(). ERROR: Unable to import pcap module: No module named pcap/No module named pcapy ERROR: Unable to import dnet module: No module named dnet Traceback (most recent call last): File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/runpy.py", line 122, in _run_module_as_main "__main__", fname, loader, pkg_name) File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/runpy.py", line 34, in _run_code exec code in run_globals File "/Users/owner1/Downloads/scapy-2.1.0/scapy/__init__.py", line 10, in <module> interact() File "scapy/main.py", line 245, in interact scapy_builtins = __import__("all",globals(),locals(),".").__dict__ File "scapy/all.py", line 25, in <module> from route6 import * File "scapy/route6.py", line 264, in <module> conf.route6 = Route6() File "scapy/route6.py", line 26, in __init__ self.resync() File "scapy/route6.py", line 39, in resync self.routes = read_routes6() File "scapy/arch/unix.py", line 147, in read_routes6 lifaddr = in6_getifaddr() File "scapy/arch/unix.py", line 123, in in6_getifaddr i = dnet.intf() NameError: global name 'dnet' is not defined

  Read the article

• Ethics of assisting other programmers, where do we draw the line?

  - by Chris

  In general, not just in relation to stackoverflow, sometimes I'm asked a programming question for which the answer will probably be used for good purposes, but there is a chance that it could not be. Two recent examples which reminded me of some real world questions I've been asked are: Send email to many users, and keep a formless application from closing for a keyboard hook Though I don't believe the intent of the authors of those questions is in any way nefarious, occasionally someone does ask such a question for purposes of aiding a spamming effort, or creating a keylogger. Even though the questioner and answerers had good intent, a 3rd party could pervert those answers to create a piece of malware or a spam utility. Should we always trust the questioner to use the answer for good? Should we feel obligated to ask the purpose of a question, and how the answer will be used? And how can we prevent answers from being overheard (when asked verbally) or being referenced (when posted publicly online) and then used for unsavory purposes?

  Read the article

• SEAGATE Barracuda 7200.11 HDD not running

  - by Dane411

  After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

  Read the article

• Prevent Windows 7 from unpluging External HDD

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• How do I combine MVCContrib's "Rescue" with Elmah?

  - by Chris

  I got the Rescue attribute working. It properly serves up the DefaultError view when there is an unhandled exception. However, these exceptions will not get logged or emailed. This SO question is answered by Atif Aziz and it looks pretty solid, but it applies to the built-in HandleErrorAttribute, which Rescue replaces, right? How do I get that to work with Rescue? I want to make sure that if an unhandled exception arises, that the user gets served up the view specified with the Rescue attribute, but the exception is still properly logged, and viewable with elmah.axd.

  Read the article

• C standard addressing simplification inconsistency

  - by Chris Lutz

  Section §6.5.3.2 "Address and indirection operators" ¶3 says (relevant section only): The unary & operator returns the address of its operand. ... If the operand is the result of a unary * operator, neither that operator nor the & operator is evaluated and the result is as if both were omitted, except that the constraints on the operators still apply and the result is not an lvalue. Similarly, if the operand is the result of a [] operator, neither the & operator nor the unary * that is implied by the [] is evaluated and the result is as if the & operator were removed and the [] operator were changed to a + operator. ... This means that this: int *i = NULL; printf("%p", (void *) (&*i) ); printf("%p", (void *) (&i[10]) ); Should be perfectly legal, printing the null pointer (probably 0) and the null pointer plus 10 (probably 10). The standard seems very clear that both of those cases are required to be optimized. However, it doesn't seem to require the following to be optimized: struct { int a; short b; } *s = 0; printf("%p", (void *) (&s->b) ); This seems awfully inconsistent. I can see no reason that the above code shouldn't print the null pointer plus sizeof(int) (possibly 4). Simplifying a &-> expression is going to be the same conceptually (IMHO) as &[], a simple address-plus-offset. It's even an offset that's going to be determinable at compile time, rather than potentially runtime with the [] operator. Is there anything in the rationale about why this is so seemingly inconsistent?

  Read the article

• How can I create a FreeBSD package using EPM that has the ORIGIN @comment?

  - by Chris R

  I'm building packages of our internal software products using EPM, and over time these packages (of which we have a large number) clutter up the output of pkg_delete and pkg_add with the following general kind of messages: err: pkg_add: package MYPACKAGE has no origin recorded I can see from some old FreeBSD lists that the +CONTENTS file in the package must have a line like this: @comment ORIGIN:some_source_path What I don't see is a way to get this line in place using EPM. Can somebody tell me how to do this?

  Read the article

• Why can't I make an http request to the ASP.NET development server on localhost?

  - by Chris Farmer

  I have an ASP.NET project (VS2008 on Windows 7 with either webforms, MVC1, or MVC2 -- all the same result for me) which is just the File-New hello world web project. It's using the default ASP.NET development server, and when I start the server with F5, the browser never connects and I get a timeout. I tried to debug this by telnetting to the development server's port while it was running, and I got the same result: C:\Users\farmercs>telnet localhost 54752 Connecting To localhost...Could not open connection to the host, on port 54752: Connect failed I can see in the system tray that the server thinks it's running, and a netstat -s -n command shows that there is indeed an active TCP listener on that port. This worked in the not-too-distant past, and I could work on web projects using the development server. One thing that has changed since then was that I installed the Microsoft Loopback Adapter to accommodate a local development Oracle installation. I'm not sure this is the problem, but it seems a likely culprit. So, what could be blocking me from connecting? And if it's the loopback, then what is a good way for me to retain my ability to connect to my development Oracle server while still being able to use the ASP.NET development server?

  Read the article

• Is it necessary to create ASP.NET 4.0 SQL session state database, distinct from existing ASP.NET 2.0

  - by Chris W. Rea

  Is the ASP.NET 4.0 SQL session state mechanism backward-compatible with the ASP.NET 2.0 schema for session state, or should/must we create a separate and distinct session state database for our ASP.NET 4.0 apps? I'm leaning towards the latter anyway, but the 2.0 database seems to just work, though I'm wondering if there are any substantive differences between the ASPState database schema / procedures between the 2.0 and 4.0 versions of ASP.NET. Thank you.

  Read the article

• Postback problem downloading zip file

  - by Chris Conway

  I've got a problem on a webforms application where a user selects some criteria from dropdowns on the page and hits a button on the page which calls this method: protected void btnSearch_Click(object sender, EventArgs e) They then click on button to download a zip file based on the criteria which calls this method: protected void btnDownload_Click(object sender, EventArgs e) In IE, they are prompted with the bar at the top of the browser that tells them "To help protect your security, Internet Explorer blocked this site from downloading files to your computer". When they click on that bar to download the file, it fires the btnSearch_Click event again. Response.ContentType and Response.AddHeader has been set up correctly. The problem is, that btnSearch appends criteria so basically it is being appended twice and causing problems. Is there something I can do to prevent this? This is a vs2008 web app using c# 3.5 for what it's worth. Thanks!

  Read the article

• Iterate over a dict or list in Python

  - by Chris Dutrow

  Just wrote some nasty code that iterates over a dict or a list in Python. I have a feeling this was not the best way to go about it. The problem is that in order to iterate over a dict, this is the convention: for key in dict_object: dict_object[key] = 1 But modifying the object properties by key does not work if the same thing is done on a list: # Throws an error because the value of key is the property value, not # the list index: for key in list_object: list_object[key] = 1 The way I solved this problem was to write this nasty code: if isinstance(obj, dict): for key in obj: do_loop_contents(obj, key) elif isinstance(obj, list): for i in xrange(0, len(obj)): do_loop_contents(obj, i) def do_loop_contents(obj, key): obj[key] = 1 Is there a better way to do this? Thanks!

  Read the article

• Can I add metadata to git commits? Or can I hide some tags in gitk

  - by Chris Nelson

  I want to associate custom metadata with a git commit. Specifically to record a review ID from a code review but it could be anything. Tags seem a natural way to do that but I expect to have a review for every commit and I don't want to clutter gitk with tons of tags. Is there some other mechanism to add custom metadata? Can I make certain tags invisible? If I could tell gitk not to display tags matching some pattern or RE, that would likely work but I don't see a way to do that.

  Read the article

• Hibernate speed, and hard drive temperature

  - by cometbill

  My computer is taking in the region of 4 minutes or so, to hibernate 4GB of RAM. Also, resting my hand on the top of it is rather hot to the touch, so I ran CrystalDisk Info and that is reporting a temperature of 49 degrees C. I It's a Western Digital 5400 rpm drive, I've had it in the laptop since I bought it for most of the 2.75 years I've had it. Power on Count is 1219 Power on Hours is 3940 hours Boot up time is quicker than resuming from hibernate, too. Is there anything I can / should check ? Advice is greatly appreciated.

  Read the article

• Defining - and dealing with - Evil

  - by Chris Becke

  As a software developer one sometimes gets feature requests that seem to be in some kind of morally grey area. Sometimes one can deflect them, or implement them in a way that feels less 'evil' - sometimes - on reflection - while the feature request 'feels' wrong theres no identifiable part of it that actually causes harm. Sometimes one feels a feature is totally innocent but various anti virus products start tagging one as malware. For example - I personally consider EULAs to (a) hopefully be unenforceable and (b) a means by which rights are REMOVED from consumers. However Anti Virus scanners frequently mark as malware any kind of download agent that does not display a EULA. Which to me is the result of a curious kind of double think. What I want to know is - are there any online (or offline) resources that cover evil software development practices? How can I know if a software practice that I consider dodgy is in fact evil enough to consider fighting?

  Read the article

• Limit of 88 bytes on response.write?

  - by Chris

  I am trying to serve a csv file from a wcf service, as a string response. It looks like this: HttpContext.Current.Response.AddHeader("Content-disposition", "attachment; filename=ImportErrors.csv"); HttpContext.Current.Response.ContentType = "text/csv"; HttpContext.Current.Response.Write(myCsvContent); The response StatusCode is set to (int)HttpStatusCode.OK (200) It works, but I am only getting 88 bytes of my csv and the rest is cut off (not shown). Any suggestions on where to look? I don't see any custom entries in my web.config that are setting a limit.

  Read the article

• Thinkpad speaker turns mute - Linux Codec issue?

  - by Curlew

  At some point a few days ago the speakers on my Lenovo Thinkpad T410 (Model number: 2537A11) suddenly stopped working randomly. This error happens every time I watch a video or listen to a music file. The sound just abruptly stops. At the moment, I can't produce a single sound no matter what I do. I am using Debian GNU/Linux on this laptop and there doesn't appear to be anything else wrong (the fan is working, no abnormal heat (staying around ~40°C), no other obvious errors or problems). Here is the output of a nice program someone pointed me to: martin@martin:~/Downloads$ sudo python run.py --monitor Using temporary directory: /dev/shm/hda-analyzer You may remove this directory when finished or if you like to download the most recent copy of hda-analyzer tool. Downloading file hda_analyzer.py Downloading file hda_guilib.py Downloading file hda_codec.py Downloading file hda_proc.py Downloading file hda_graph.py Downloading file hda_mixer.py Downloaded all files, executing hda_analyzer.py Watching 1 cards ====================================== Sound is working normally and then it stops and the following lines appear: Diff for codec 0/0 (0x14f15069): --- +++ @@ -164,17 +164,17 @@ Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT - Power: setting=D0, actual=D0 + Power: setting=D3, actual=D3 Connection: 2 0x10* 0x11 Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE And now there is also an error in the dmesg output hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. I changed the bdl_pos_adj to various numbers (-1, 0, 64, 1024) and either there is no change at all or dmesg reports that the adjustment is too big. I wonder if this bdl_pos_adj is the real reason for the error. Here is my hardware information provided by alsa-info.sh website. Okay, i did some serious testing and even installed Windows and now i officially conclude that this is a hard-ware related issue with my Laptop speakers. Reason: The error occurs in my installed Debian Linux, an Ubuntu Live distribution and Windows XP No error-message appears in all of the OS. The sound just keeps running and i can't hear a thing. I tested different setups, including OSS, ALSA and the pulseaudio server on top If i use my new usb-headphones i can hear sound all the time without any sudden silences. So obviously, although hard to believe, my laptop speakers are not okay (never heard of similar cases). I'll award the bounty to anyone who can point me to good tutorials or the procedure how to exchange my T410 speakers (i still have warranty. The laptop was bought in Germany, but now i am in Denmark). Or to someone who can explain me the output from hda-analyzer (big log above).

  Read the article

• How do I pass the currently logged in user's credentials to a web service using Integrated Windows A

  - by Chris Smith

  I am having a frustrating time trying to do something with Perl that would take a couple of lines of code in C#, namely to call a web service on a Windows server that requires Integrated Windows Authentication. The most likely candidate I've found for success is a module called LWP::Authen::Ntlm, but all the examples I've googled require you to explicitly supply username, password and domain. I don't want to do that - I just want the request to use the credentials of the currently logged in user, a la CredentialCache.DefaultCredentials in .NET. Have any of you Perl gurus out there ever had to do this? Thanks.

  Read the article

• Delete Stored Proc Deadlock in Sql Server

  - by Chris

  I am having the following deadlock in SQL Server 2005 with a specific delete stored proc and I can't figure out what I need to do to remedy it. <deadlock-list> <deadlock victim="processf3a868"> <process-list> <process id="processcae718" taskpriority="0" logused="0" waitresource="KEY: 7:72057594340311040 (b50041b389fe)" waittime="62" ownerId="1678098" transactionguid="0x950057256032d14db6a2c553a39a8279" transactionname="user_transaction" lasttranstarted="2010-05-26T13:45:23.517" XDES="0x8306c370" lockMode="RangeS-U" schedulerid="1" kpid="2432" status="suspended" spid="59" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-05-26T13:45:23.717" lastbatchcompleted="2010-05-26T13:45:23.717" clientapp=".Net SqlClient Data Provider" hostname="DEVELOPER01" hostpid="28104" loginname="DEVELOPER01\ServiceUser" isolationlevel="serializable (4)" xactid="1678098" currentdb="7" lockTimeout="4294967295" clientoption1="673185824" clientoption2="128056"> <executionStack> <frame procname="DB.dbo.sp_DeleteSecuritiesRecords" line="13" stmtstart="708" stmtend="918" sqlhandle="0x030007008b6b662229b10c014f9d00000100000000000000"> DELETE FROM tSecuritiesRecords WHERE [FilingID] = @filingID AND [AccountID] = @accountID </frame> </executionStack> <inputbuf> Proc [Database Id = 7 Object Id = 577137547] </inputbuf> </process> <process id="processf3a868" taskpriority="0" logused="0" waitresource="KEY: 7:72057594340311040 (4f00409af90f)" waittime="93" ownerId="1678019" transactionguid="0xb716547a8f7fdd40b342e5db6b3699fb" transactionname="user_transaction" lasttranstarted="2010-05-26T13:45:21.543" XDES="0x92617130" lockMode="X" schedulerid="3" kpid="13108" status="suspended" spid="57" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-05-26T13:45:23.717" lastbatchcompleted="2010-05-26T13:45:23.717" clientapp=".Net SqlClient Data Provider" hostname="DEVELOPER01" hostpid="28104" loginname="DEVELOPER01\ServiceUser" isolationlevel="serializable (4)" xactid="1678019" currentdb="7" lockTimeout="4294967295" clientoption1="673185824" clientoption2="128056"> <executionStack> <frame procname="DB.dbo.sp_DeleteSecuritiesRecords" line="13" stmtstart="708" stmtend="918" sqlhandle="0x030007008b6b662229b10c014f9d00000100000000000000"> DELETE FROM tSecuritiesRecords WHERE [FilingID] = @filingID AND [AccountID] = @accountID </frame> </executionStack> <inputbuf> Proc [Database Id = 7 Object Id = 577137547] </inputbuf> </process> </process-list> <resource-list> <keylock hobtid="72057594340311040" dbid="7" objectname="DB.dbo.tSecuritiesRecords" indexname="PK_tTransactions" id="lock82416380" mode="RangeS-U" associatedObjectId="72057594340311040"> <owner-list> <owner id="processf3a868" mode="RangeS-U"/> </owner-list> <waiter-list> <waiter id="processcae718" mode="RangeS-U" requestType="convert"/> </waiter-list> </keylock> <keylock hobtid="72057594340311040" dbid="7" objectname="DB.dbo.tSecuritiesRecords" indexname="PK_tTransactions" id="lock825fd380" mode="RangeS-U" associatedObjectId="72057594340311040"> <owner-list> <owner id="processcae718" mode="RangeS-S"/> </owner-list> <waiter-list> <waiter id="processf3a868" mode="X" requestType="convert"/> </waiter-list> </keylock> </resource-list> </deadlock> </deadlock-list>

  Read the article

• Radiation from a UPS

  - by Erel Segal

  In our office, there are frequent eletric shortages that harm my desktop computer, so I wanted to install a UPS. However, my office-mates pointed me to papers talking about hazardous radiation from the UPS. The UPS manufacturers themselves recommend to put the UPS several meters away from humans, which is not possible because our office is small (the power is about 0.5 meters from us). As an alternative to UPS, my office-mates recommended that I switch to a laptop, which has a battery so it's immune to shortages. I have several questions: Is it true that the radiation from a laptop battery is lower than the radiation from a UPS? They do just the same thing - supply power using a battery! If the answer to 1 is yes - is there an alternative way to attach a battery, similar to a laptop battery, to a desktop computer? If the answer to 1 is no - how can I prove this to my office-mates, so that they let me use UPS?

  Read the article

• Sources for news about network security

  - by chris.nullptr

  I am a software developer that wants to stay up-to-date on network security news. What are some of the best sources online for not only keeping tabs on newly discovered security vulnerabilities that may affect projects I'm working on, but also best-practices when developing network software. Please keep in mind that I am looking for sources that cater to the software developer not IT administration.

  Read the article

• As a consultant should I charge my clients for developing specs?

  - by Chris

  I'm trying to transition into some programming consulting work. A friend of my former employer is interested in having me "develop a spec," which I take to mean come up with some technology requirements and time estimates (e.g. milestones). Do developers normally charge for this? I'm imagining it's basically the same kind of workload that creating a bid for a project would take. On one hand, consultants don't get paid for the time they put into the legwork of a bid. On the other hand, this is probably go to be more than a couple hours of work, and my time is valuable. Any advice? Any sites besides SO I could go to get advice with this kind of stuff? (Sorry if this isn't programming-related enough for StackOverflow! I don't know where else to get advice!)

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >