Search Results

Search found 5758 results on 231 pages for 'contents'.

Page 162/231 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• raid md device is not remove from memory, how to overcome this problem

  - by santhosha

  i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

  Read the article

• How to update-grub on a system running overlayroot?

  - by mikepurvis

  We ship boxes configured with overlayroot, using the following overlayroot.conf: overlayroot=device:dev=/dev/sda6,timeout=20,recurse=0 Which produces the following mount configuration: $ mount overlayroot on / type overlayfs (rw,errors=remount-ro) /dev/sda5 on /media/root-ro type ext3 (ro,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda6 on /media/root-rw type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered) /dev/sda1 on /boot type ext3 (rw) As you can see, three key physical partitions: sda1 is /boot, sda5 is a read-only "factory" root, and sda6 is a "user" root which can be wiped at any point to restore the machine to its original factory state. Now, the problem arises when update-grub is run for any reason: $ sudo update-grub [sudo] password for administrator: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Understandable, since / is an overlayfs. The contents of /usr/sbin/update-grub are: #!/bin/sh set -e exec grub-mkconfig -o /boot/grub/grub.cfg "$@" With /usr/sbin/grub-mkconfig being the business part of things. But the actual problem is in /usr/sbin/grub-probe, called by grub-mkconfig, and grub-probe is a binary. So my question is, is there a parameter or whatever which can make grub-probe do the right thing in the face of / being an overlayfs? And secondly, is there a way to hack/patch that in so that the update-grub script just does the right thing? Thanks.

  Read the article

• Windows 7 cannot view FAT32 formatted bootable usb drive

  - by NaimK

  I'm having some issue where when I run bootsect with a command line of "bootsect.exe /nt52 : /force /mbr", then Windows 7 (the comp I'm running bootsect on) can no longer view the contents of the usb drive. Explorer tries to look at it, and then fails, and I can't even correctly eject the drive, when I try, it does nothing until I yank it out, and then I get some errors. Bootsect reports success on writing the volume and the drive data to make it bootable, but it doesn't boot after copying on the necessary files (files from a created ISO, it works when it is created on XP). But this may be that I'm not following the same instructions as when building it on XP since some of the command don't seem to always work correctly. The drive is formatted to FAT32 (necessary I think, cause I'm installing a custom version of Win XP embedded). Any ideas? Or perhaps a good or automated way to load a usb with a custom version of win xp and make it bootable from Win 7? I am having some issues, for instance, "ufdprep.exe" rarely works when I'm running it from Windows 7, I don't know why.

  Read the article

• VMware Fusion configuration files missing

  - by jdmuys

  I need to set up port forwarding to my VM in Fusion 5. Everywhere on the net, the solution is described as editing the file: /Library/Application Support/VMware Fusion/vmnet8/nat.conf However, on my install, that file doesn't exist. Neither does the vmnet8 directory. Here is the full content of VMware stuff I have in /Library/Application Support/: /Library/Application Support/ VMware/ VMware Fusion AdminWritable Shared vmInventory usbarb.rules VMware Fusion That's right: /Library/Application Support/VMware Fusion/ exists but is empty. And there is no VMware folder in other Library directories on my system. I am running OS X 10.8.2. I just reinstalled Fusion 5.02, no change. Meanwhile, I have 3 VMs that work just fine. So how am I supposed to set up port forwarding with Fusion 5? Thanks, JD Edit: in a hunch, I tried ps ax | grep natd which returned: 9646 ?? S 0:00.01 /Applications/VMware Fusion.app/Contents/Library/vmnet-natd -s 7 -m /Library/Preferences/VMware Fusion/vmnet8/nat.mac -c /Library/Preferences/VMware Fusion/vmnet8/nat.conf So it seems that the configurations files are now in the directory /Library/Preferences/VMware Fusion. I'll work from here and edit this question as I make progress.

  Read the article

• File recovery from Mac results in random files and extensions – how do I get my data back?

  - by Robsta

  This Mac hard drive was dying. Someone I knew did a file recovery and got as many files as he could. The program (not sure how it was done, or what program it was) dished out a bunch of folders names such as: DIR56.TOC DIR55.CUR DIR54.GPZ DIR53.GZI … and so forth, all the way down to DIR0.LZH. Some of the file extensions I do understand — like .JPEG, or .MOV — but most of them are ones I've never heard of. I've googled some of them like .TOC, wich stands for "table of contents", but I don't understand how to transfer that data back to the Mac. Currently, they are on a Windows machine. They are being transfered onto an external hard drive that the Mac can read. It can also see all the files. However, the few that I tested to see if the Mac recognizes them (like .TOC and .CUR) cannot be opened. Anyone have any idea as to what I should do? There are some important assignments on there I need to get. EDIT: Data transfer was most likely done by: Easy Recover 6 professional (95% sure, no guarantee)

  Read the article

• PAM Winbind Expired Password

  - by kernelpanic

  We've got Winbind/Kerberos setup on RHEL for AD authentication. Working fine however I noticed that when a password has expired, we get a warning but shell access is still granted. What's the proper way of handling this? Can we tell PAM to close the session once it sees the password has expired? Example: login as: ad-user [email protected]'s password: Warning: password has expired. [ad-user@server ~]$ Contents of /etc/pam.d/system-auth: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth sufficient pam_winbind.so use_first_pass auth required pam_deny.so account [default=2 success=ignore] pam_succeed_if.so quiet uid >= 10000000 account sufficient pam_succeed_if.so user ingroup AD_Admins debug account requisite pam_succeed_if.so user ingroup AD_Developers debug account required pam_access.so account required pam_unix.so broken_shadow account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account [default=bad success=ok user_unknown=ignore] pam_winbind.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password sufficient pam_winbind.so use_authtok password required pam_deny.so session [default=2 success=ignore] pam_succeed_if.so quiet uid >= 10000000 session sufficient pam_succeed_if.so user ingroup AD_Admins debug session requisite pam_succeed_if.so user ingroup AD_Developers debug session optional pam_mkhomedir.so umask=0077 skel=/etc/skel session optional pam_keyinit.so revoke session required pam_limits.so session optional pam_mkhomedir.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so

  Read the article

• Ubuntu 10.04: Unable to Start RabbitMQ Server Post-Installation

  - by Garland W. Binns

  After installing RabbitMQ on Ubuntu 10.04 I receive a failure message that the service was unable to start. Any insight into the issue would be greatly appreciated! Below are contents of startup_log and startup_err. Startup_log: {error_logger,{{2012,7,7},{15,50,31}},"Protocol: ~p: register error: ~p~n",["inet_tcp",{{badmatch,{error,etimedout}},[{inet_tcp_dist,listen,1},{net_kernel,start_protos,4},{net_kernel,start_protos,3},{net_kernel,init_node,2},{net_kernel,init,1},{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}]} {error_logger,{{2012,7,7},{15,50,31}},crash_report,[[{initial_call,{net_kernel,init,['Argument__1']}},{pid,<0.20.0>},{registered_name,[]},{error_info,{exit,{error,badarg},[{gen_server,init_it,6},{proc_lib,init_p_do_apply,3}]}},{ancestors,[net_sup,kernel_sup,<0.9.0>]},{messages,[]},{links,[#Port<0.100>,<0.17.0>]},{dictionary,[{longnames,false}]},{trap_exit,true},{status,running},{heap_size,987},{stack_size,24},{reductions,512}],[]]} {error_logger,{{2012,7,7},{15,50,31}},supervisor_report,[{supervisor,{local,net_sup}},{errorContext,start_error},{reason,{'EXIT',nodistribution}},{offender,[{pid,undefined},{name,net_kernel},{mfa,{net_kernel,start_link,[[rabbitmqprelaunch877,shortnames]]}},{restart_type,permanent},{shutdown,2000},{child_type,worker}]}]} {error_logger,{{2012,7,7},{15,50,31}},supervisor_report,[{supervisor,{local,kernel_sup}},{errorContext,start_error},{reason,shutdown},{offender,[{pid,undefined},{name,net_sup},{mfa,{erl_distribution,start_link,[]}},{restart_type,permanent},{shutdown,infinity},{child_type,supervisor}]}]} {error_logger,{{2012,7,7},{15,50,31}},std_info,[{application,kernel},{exited,{shutdown,{kernel,start,[normal,[]]}}},{type,permanent}]} {"Kernel pid terminated",application_controller,"{application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}}"} Startup_err: Crash dump was written to: erl_crash.dump Kernel pid terminated (application_controller) ({application_start_failure,kernel,{shutdown,{kernel,start,[normal,[]]}}})

  Read the article

• Bash script 'while read' loop causes 'broken pipe' error when run with GNU Parallel

  - by Joe White

  According to the GNU Parallel mailing list this is not a GNU Parallel-specific problem. They suggested that I post my problem here. The error I'm getting is a "broken pipe" error, but I feel I should first explain the context of my problem and what causes this error. It happens when trying to use any bash script containing a 'while read' loop in GNU Parallel. I have a basic bash script like this: #!/bin/bash # linkcheck.sh while read domain do host "$domain" done Assume that I want to pipe in a large list (250mb say). cat urllist | ./linkcheck.sh Running host command on 250mb worth of URLs is rather slow. To speed things up I want to break up the input into chunks before piping it and then run multiple jobs in parallel. GNU Parallel is capable of doing this. cat urllist | parallel --pipe -j0 parallel ./linkcheck.sh {} {} is substituted by the contents of urllist line-by-line. Assume that my systems default setup is capable of running 500ish jobs per instance of parallel. To get round this limitation we can parallelize Parallel itself: cat urllist | parallel -j10 --pipe parallel -j0 ./linkcheck.sh {} This will run 5000'ish jobs. It will also, sadly, cause the error "broken pipe" (bash FAQ). Yet the script starts to work if I remove the while read loop and take input directly from whatever is fed into {} e.g., #!/bin/bash # linkchecker.sh domain="$1" host "$1" Why will it not work with a while read loop? Is it safe to just turn off the SIGPIPE signal to stop the "broken pipe" message, or will that have side effects such as data corruption? Thanks for reading.

  Read the article

• NGINX SSI Not working

  - by Mike Kelly

  I'm having trouble getting SSI to work on NGINX. You can see the problem if you hit http://www.bakerycamp.com/test.shtml. Here is the contents of that file: <!--# echo hi --> If you hit this in a browser, you see the SSI directive in the content - so apparently NGINX is not interpreting the SSI directive. My NGINX config file looks like this: server { listen 80; server_name bakerycamp.com www.bakerycamp.com; access_log /var/log/nginx/bakerycamp.access.log; index index.html; root /home/bakerycamp.com; location / { ssi on; } # Deny access to all hidden files and folders location ~ /\. { access_log off; log_not_found off; deny all; } } I did not build NGINX from sources but installed it using apt-get. I assume it has the SSI module (since that is default) but perhaps not? Should I just bite the bullet and rebuild from sources? Is there anyway to tell if the installed NGINX supports SSI and my config is just wrong?

  Read the article

• Apache2 refuses to process php files - "Snow Leopard" OSX 10.6.4

  - by w-01

  I have a macbook pro i5. my understanding is that by default it should be able to serve php5. i have uncommented the relevant line in /etc/apache2/httpd.conf LoadModule php5_module libexec/apache2/libphp5.so I have restarted apache with sudo apachectl -k restart and when i try to access a file with a php extension, Apache prompts me to download the file. i.e. instead of processing the php and sending me html, it thinks i want to download the file.... when i look in apache error log i see this [Fri Nov 12 10:16:14 2010] [notice] Apache/2.2.14 (Unix) PHP/5.3.2 mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 mod_wsgi/3.2 Python/2.6.1 configured -- resuming normal operations so it looks like php5 is loading properly. I'd like to know either: How do i fix this? or How do I reinstall apache2 so that it's like i just installed the os? thanks in advance update @Zayne - the end of my httpd.conf has Include /private/etc/apache2/other/*.conf and i have a file /etc/apache2/other/php.conf with the contents <IfModule php5_module> AddType application/x-httpd-php .php AddType application/x-httpd-php-source .phps <IfModule dir_module> DirectoryIndex index.html index.php </IfModule> </IfModule> @Zayne I've already copied php.ini.default to php.ini in the same folder. when i run sudo apachectl configtest i get /usr/sbin/apachectl: line 82: ulimit: open files: cannot modify limit: Invalid argument httpd: Could not reliably determine the server's fully qualified domain name, using ::1 for ServerName Syntax OK furthermore i decided to try apachectl -M which shows all loaded modules Most importantly in the list of loaded modules i got Loaded Modules: php5_module (shared) Since the module is being loaded, it seems like the issue has more to do with making apache use php engine to process the php files.... so something wrong with the ifmodule directive?

  Read the article

• Permission denied when running Rails app in VirtualBox Ubuntu guest with files on Windows host

  - by Ola Tuvesson

  I think I'm close to having my dev environment set up exactly the way I want, but one final snag remains. I'm running VirtualBox on a Windows 7 64bit host, with my dev enviroment inside a Ubuntu 12.04 guest. I want to keep the files for my projects on the host filesystem - partly so I can access them when the Ubuntu guest is not running, but also so I can use Tortoise and other Windows based tools (cough Photoshop), and it also eases my backup scheme somewhat. So I've got a folder "Rails" on my NTFS drive, which I've shared (Samba) from the host with a user specifically created for the Ubuntu guest. The mount point has been set up and an entry added to fstab (cifs), using a credentials file and the options iocharset=utf8,mode=0777,dir_mode=07??77 This mounts fine and my Ubuntu user has both read and write permissions to the contents. But when I try to start my Rails app I get permission errors on any files the app needs to write to (e.g. the log file) - why is that? Are there any major conceptual flaws with this approach? Would I be better off using the VBox "shared folders" function?

  Read the article

• MySQL binlogs seems incomplete?

  - by warl0ck

  I created a Database, a table and inserted some data, and found this binlog.0000001 in my log folder, but when I do mysqlbinlog binlog.0000001, it only shows stuff below, seems incomplete: (There's only two files in the log dir: binlog.000001 binlog.index) /*!40019 SET @@session.max_insert_delayed_threads=0*/; /*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/; DELIMITER /*!*/; # at 4 #120924 21:12:56 server id 1 end_log_pos 107 Start: binlog v 4, server v 5.5.24-0ubuntu0.12.04.1-log created 120924 21:12:56 at startup # Warning: this binlog is either in use or was not closed properly. ROLLBACK/*!*/; BINLOG ' GAVhUA8BAAAAZwAAAGsAAAABAAQANS41LjI0LTB1YnVudHUwLjEyLjA0LjEtbG9nAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAYBWFQEzgNAAgAEgAEBAQEEgAAVAAEGggAAAAICAgCAA== '/*!*/; DELIMITER ; # End of log file ROLLBACK /* added by mysqlbinlog */; /*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/; If this warning was the cause: Warning: this binlog is either in use or was not closed properly.. How do I force close the log? EDIT After flush logs command, I see "0 rows" affected, and a few new files, binlog.000001 binlog.000002 binlog.000003 binlog.000004 binlog.index, the contents are nearly the same as binlog.000001. Now I dropped the database, and try restore it with mysqlbinlog binlog.0* | mysql -u root -p, but the database wasn't recovered. EDIT 2 [mysqld] user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking log-bin=/var/log/mysql/binlog binlog-do-db=mydb bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP query_cache_limit = 1M query_cache_size = 16M expire_logs_days = 10 max_binlog_size = 100M P.S /var/log/mysql{.err,.log} are both empty

  Read the article

• VMware virtual machine network devices malfunctioning

  - by sheepz

  I'm running Ubuntu 10.04 LTS and VMvware workstation 7.0.1 build-227600. The virtual machine i'm running in VMware is a custom distribution built on Debian Linux version 3.1. I'm still pretty much a beginner with UNIX administration. After having messed around with the vmware (changed only the name of the folder, the vmx and and other .v* files accordingly in which the .vmx was situated, and the configuration in the vmx file accordingly), the network devices on the virtual machine do not work anymore. The virtual machine is used for securely sending messages. The virtual machine: As far as I know, this perl file called proxy-gen-ifalias eth0 is responsible for properly setting up the two virtual network devices eth0 and eth1. The Virtual machine comes with a GUI interface in which I have set up two ethernet network devices, one internal, the other external. Now, after having messed around with this, the UI gives me this error message: perl proxy-gen-ifalias eth0 /etc/modprobe.d/alias-eth0 /sbin/update-modules perl proxy-gen-ifalias eth1 /etc/modprobe.d/alias-eth1 /sbin/update-modules ifdown eth0 ifdown: interface eth0 not configured ifdown eth1 ifdown: interface eth1 not configured perl proxy-gen-netcfg /etc/network/interfaces ifup eth0 SICCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device eth0: ERROR while getting interface flags: No such device Failed to bring up eth0. ifconfig eth0 eth0: error fetching interface information: Device not found make: *** [/etc/network/interfaces] Error 1 ~ Here are the contents of the two perl files referred to in the message: paste.pocoo.org/show/2AMzAYhoCRZqlGY7wUFk/ proxy-gen-netcfg

  Read the article

• Serving images from another hostname vs Apache overload for the rewrites

  - by luison

  We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths? EDIT Just to clarify, our concern is not to do so much with server performance or bandwith. We could obviously employ an external CDN server but we have plenty CPU and bandwith. Our concern is with how to have "old" sites with plenty semi-static HTML content benefiting from splitting connections for images and static content via apache without having to change the html to absolute paths (ie. image.jpg to cdn.main.com/image.jpg happening on the server not the code)

  Read the article

• XP CD doesn't offer repair option

  - by SLaks

  I'm fixing an IBM Thinkpad laptop running XP Pro which doesn't boot all the way (It gets past the XP logo boot screen, a movable mouse cursor appears, and it doesn't get any further, even in safe mode) after being bumped a bit. I'd like to do a repair install. I booted it to an XP Pro CD, but the Repair install option (not recovery console) doesn't appear. After pressing F8 to accept the EULA, it says, Loading setupp.ini, then immediately goes to a partition list (it never says Searching for previous installations of Microsoft Windows). If I select the partition, it warns me that there is already a Windows installation in that partition, and that it will be completely obliterated if I continue. (So I know that it does see the contents of the hard disk) I booted the same CD in an XP virtual machine, and it offered to repair the XP installtion in the virtual machine, so the problem isn't with the CD. Does anyone know how make it do a repair install (or have any other ideas to solve the problem?) It might not show up because it's an OEM installation (but not an OEM CD), but that's just a guess.

  Read the article

• Does Hyper-V support SCSI Pass-through discs in a Server 2003 R2 VM?

  - by Peter Bernier

  I'm running into some difficulties getting pass-through disks to be accessible to a Hyper-v server 2003 r2 virtual machine. Host OS : Server 2008 R2 full w/Hyper-V role Guest OS : Server 2003 R2 (Windows Home Server) The guest's OS disk is a pass-through disk on the IDE controller (not the best solution, but I can live with it). My storage disks will be pass-through disks on the SCSI controller. I'm able to see all of the disks that I'll be using for the VM on the host without issue. The problem that I'm having is that I can't seem to get the guest OS to be able to 'see' the storage drives (as pass-through disks on the SCSI controller). Here's what I'm doing : On the host, the storage drive is set to 'Offline' just like the OS disk (this is required for pass-through to work). In the VM, the storage drive is on the SCSI controller. Hyper-V Integration Tools are installed in guest. That's as far as I'm able to get. I don't see the drive in Computer Management, or in Windows Explorer (I've tried with an unformatted disk, as well as after formatting a partition). I am able to see a removable device that lists the disk's model number in the Guest, but I can't seem to access the storage. (I get an entry in Device Manager that needs drivers, but nothing on the Integration Tools disc works..) Trouble-shooting steps I've tried : If put the pass-through drive on the IDE controller, I can see it in the Guest. If put the storage drive 'Online' in the host and create a VHD on it on the SCSI controller, I can see it in the Guest. I suppose I could create a fixed-size VHD that consumes the entire disk, but I'd rather not have that overhead. I've also extracted the contents of the Integration Tools drivers (x86 and amd64) and tried pointing the disk controller to each of those, with no luck. Can anyone offer suggestions as to how I can get this to work properly?

  Read the article

• Windows 7 on an EEE PC 901 - Is it a practical change?

  - by Dave

  I am currently running WinXP on my EEE PC 901, and I'm happy to say that it runs really well. But this did not come with out significant manipulation of the OS. Here's the basic steps I took: Install XP Modify registry to install Install bare essential drivers Relocate page file to d:\ (remember, this model has two SSD's, one roughly 3.6gb, and the other roughly 16gb - XP won't run on the bigger drive, only the smaller one) Install remaining drivers skip normal updates, install service pack 2 straight away. modify system registry to place service pack backup folder into new Program Files directory on D drive (where software is being installed). Change My Documents folder to sit on D drive. Install .net framework Install remaining updates and service pack 3 (the hidden backup folders in the c:\Windows directory are deleted after every update as well as the contents of the service pack downloads folder in order to continually free up space). I have also found that Disktrix UltimateDefrag to be brilliant at keeping the system clean and tidy. This is roughly the order I did things in. In this configuration the machine works really well. QUESTION: Can this kind of configuration be implemented with Windows 7 to achieve the same result on this machine? Thanks in advance. Dave.

  Read the article

• Why does RoboCopy create a hidden system folder?

  - by Svish

  I thought I would try out RoboCopy for mirroring the contents of a folder to another harddrive. And seems like it worked. But, for some reason, to see the destination folder I have to both enable Show hidden files, folders and drives and disable Hide protected operating system files. Why is this? Both the source and destination folder was initially both visible and normal directories. When I open up the properties for that destination folder, the Hidden attribute is even disabled. What is going on here? Is it because I ran it in an administrator command prompt? Or is it an issue with my choice of modifiers? Or does robocopy really just work this way? robocopy E: I:\E /COPYALL /E /R:0 /MIR /B /ETA Update: Tried to copy another drive to another folder, and I got the same thing happening there. But when I try to just copy a folder to a different folder, then the destination folder stays normal. Could it be because I copy a drive? If so, how can I prevent this from happening? Cause I really do want to copy the whole drive...

  Read the article

• Port forwarding for samba

  - by EternallyGreen

  Alright, here's the setup: Internet - Modem - WRT54G - hubs - winxp workstations & linux smb server. Its basically a home-style distributed internet connection setup, except its at a school. What I want is remote, offsite smb access. I figured I'd need to find out which ports need forwarding and then forward them to the server on the router. I'm told in another question on SF that multiple ports will need forwarding, and it gets somewhat complicated. One of the things I need to know is which ports require forwarding for this, and what complications or vulnerabilities could arise from this. Any additional information you think I should have before doing this would be great. I'm told SMB doesn't support encryption, which is fine. Given I set up authentication/access control, all this means is that once one of my users authenticates and starts downloading data, the unencrypted traffic could be intercepted and read by a MITM, correct? Given that that's the only problem arising from lack of encryption, this is of no concern to me. I suppose that it could also mean a MITM injecting false data into the data stream, eg: user requests file A, MITM intercepts and replaces the contents of file A with some false data. This isn't really an issue either, because my users would know that something was wrong, and its not likely anyone would have incentive to do this anyway. Another thing I've been informed of is Microsoft's poor implementation of SMB, and its crap track record for security. Does this apply if only the client-end is MS? My server is linux.

  Read the article

• Ruby on Rails (Redmine) on Apache - 503 Error

  - by andrewtweber

  I am running a Ruby on Rails application called Redmine. It's been working fine, but today it's giving a 503 Service Temporarily Unavailable error. (It was initially set up by an employee who is now gone.) I check the error log and it says: [Mon Nov 21 11:03:30 2011] [error] (111)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3000 (127.0.0.1) failed [Mon Nov 21 11:03:30 2011] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1) Here's a chunk of my Apache config <VirtualHost *:80> ServerName redmine.{domain}.com RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f RewriteRule ^/(.*)$ balancer://redminecluster%{REQUEST_URI} [P,QSA,L] </VirtualHost> <Proxy balancer://redminecluster> BalancerMember http://127.0.0.1:3000 </Proxy> I found this link: http://www.redmine.org/boards/2/topics/20561 which suggests I simply need to "start the redmine server." I've tried /etc/init.d/redmine start which gives me this output => Booting Mongrel => Rails 2.3.11 application starting on http://0.0.0.0:3000 The contents of /etc/init.d/redmine: cd /var/redmine sudo ruby script/server -d -e production One thing I immediately notice is that it says 0.0.0.0 instead of 127.0.0.1. In addition, running top or ps -ef shows no record of a "mongrel" or "redmine" process. I've also tried restarting Apache before and after starting redmine. Not sure where to go from here.

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

• What causes Windows Media Player on Windows 8 to not play the entire library?

  - by somequixotic

  Behavior 1: Verify that the WMP playlist is clear of all songs. Turn on the "Shuffle" and "Repeat" features. Double-click on a music track in the Library. Click the "Next" button (double right angle brackets). A random song from any track in the Library is randomly chosen and played. When observing the Playlist (clicking the "Play" tab), the entire contents of the Library appears in the Playlist. Behavior 2: Verify that the WMP playlist is clear of all songs. Turn on the "Shuffle" and "Repeat" features. Double-click on a music track in the Library. Click the "Next" button (double right angle brackets). The button visually depresses like it has registered the click, but nothing happens. Absolutely nothing. Moreover, the "Previous" button is grayed out. When observing the Playlist, only the one song that was double-clicked appears in the Playlist. What causes Behavior 2? I cannot correlate any specific action I've taken with Behavior 2, and Behavior 1 has been the case as long as I can remember, all the way back to Windows XP. Even earlier during my usage of Windows 8, I recall Behavior 1 working correctly. But suddenly, inexplicably, without changing any settings in WMP, Behavior 2 kicked in, and persists after reboots. I've tried sfc /scannow in an administrator prompt. All system files are in order. I've downloaded all Windows Updates and driver updates. I've attempted to alter WMP options and playback settings to no avail. So... what is causing Behavior 2? Is this an intended, valid behavior, or is something malfunctioning? How would I know what that "something" is? How would I go about fixing it without just reinstalling Windows 8 fresh?

  Read the article

• Ubuntu rm not deleting files

  - by ILMV

  My colleague and I have been struggling with deleting a directory and its contents. We are working on a new version of our websites source code on Ubuntu 8.04 (dir: /var/www/websites), what we want to do is delete the websites directory and recreate it from a .tar backup we created a couple weeks ago. The purpose of this is so we can run our deployment procedure in a local environment before we do so on our live / public environment. We use this command: rm -r websites This deletes the directory and the files within it. The problem occurs when we un-tar our backup file and view the website we are getting files that don't exist in the .tar backup, in fact these files were only created a few days ago and should have been deleted. We delete the directory once more in the manner stated above, we then create a new websites directory using the mkdir command. Strangely at this stage the 'deleted files' do not come back, but if we unpack our .tar file the 'deleted files' appear again. Is there a way to ensure these files are deleted, or at least the pointers that associate them with said directory. Our .tar backup does not include these files We do not want to use the shred command We do not want to use 3rd party applications Solution should be functional via terminal (SSH) Many thanks! EDIT Er... we fixed it. Turns out the files that are reappearing are because of a link we have to another directory (outside the /var/www/websites), we were restoring the link but not deleting the files on the other end. D'oh! Many thanks for your help guys... friday afternoon syndrome :-)

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• How to combine try_files and sendfile on Nginx?

  - by hcalves

  I need Nginx to serve a file relative from document root if it exists, then fallback to an upstream server if it doesn't. This can be accomplished with something like: server { listen 80; server_name localhost; location / { root /var/www/nginx/; try_files $uri @my_upstream; } location @my_upstream { internal; proxy_pass http://127.0.0.1:8000; } } Fair enough. The problem is, my upstream is not serving the contents of URI directly, but instead, returning X-Accel-Redirect with a location relative to document root (it generates this file on-the-fly): % curl -I http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg HTTP/1.0 200 OK Date: Mon, 26 Nov 2012 20:58:25 GMT Server: WSGIServer/0.1 Python/2.7.2 X-Accel-Redirect: animals/kitten.jpg__100x100__crop.jpg Content-Type: text/html; charset=utf-8 Apparently, this should work. The problem though is that Nginx tries to serve this file from some internal default document root instead of using the one specified in the location block: 2012/11/26 18:44:55 [error] 824#0: *54 open() "/usr/local/Cellar/nginx/1.2.4/htmlanimals/kitten.jpg__100x100__crop.jpg" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /animals/kitten.jpg__100x100__crop.jpg HTTP/1.1", upstream: "http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg", host: "127.0.0.1:80" How do I force Nginx to serve the file relative to the right document root? According to XSendfile documentation the returned path should be relative, so my upstream is doing the right thing.

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >