Search Results

Search found 5124 results on 205 pages for 'week'.

Page 162/205 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• How to resolve 'No internet connectivity issues' with a Virtualised 2008 R2 Server using Forefront UAG

  - by user684589

  I have spent some considerable time reading up on as many possible blogs and articles as I can to help me solve why my VM (Running on Hyper-V) for DirectAccess has suddenly stopped being able to access the internet. The VM setup shares the same internet connection on which I have written and submitted this question so I know that the actual underlying internet connection is fully functional. Previous to last week the DirectAccess was fully functional and had no issues. This is a recent problem which was led up to by a number of consistent crashes on the DA machine when access was attempted. Upon reboot all seemed well until recently. I am not certain whether it is relevant, but previously to this I had a number of power issues where the entire VM host shutdown unexpectedly leaving around 8 VM's in a bad way. Upon restart, the UAG DirectAccess machine was unable to access its configuration service (although the service was started) but this seemed to relate to the Light-Weight Active Directory Service AD LDS which had a corrupted database. Having repaired this database, I restarted the service and could subsequently reconnect to the configuration service again. For good measure I re-bound the network adapters (virtualised through Hyper-V) and DirectAccess claimed to be all happy again. However as it stands my machine is still unable to access the internet showing the "No internet connectivity" exclamation mark for the external facing NIC. I have also tried removing the adapters, disabling, re-enabling and the problem persists. The intranet part of the VM CorpNet seems to be fully functional as before and I'm running out of ideas. Any input would be greatly appreciated. I am not an advanced Domain Administrator so please be gentle.

  Read the article

• Motorola Surfboard SB6121 modem conected to 2WIREi38HG wireless router but there's no internet access

  - by Jessica

  I have just switched to Comcast cable internet from AT&T Uverse and I was hoping to use the 2WIRE wireless router with the new Surfboard modem so I can have wireless access. I messed around with some settings and got it working for my laptop (I'm not terribly well versed in computer stuff; I think it was mostly luck) for about a week. The other day I tried to get online and there was no internet connection. I restarted the equipment with no success and then plugged the modem directly into the laptop. This worked, so I knew there was no outage. I connected the ethernet cord to the router and a second cord to my laptop and that worked, too. But when I tried again just with the wireless the laptop connects to the router, but doesn't recognize it or find an internet connection. I tried to go to http://gateway.2Wire.net to fiddle with the settings, but all I get is a Server Not Found page. I tried to check the ip address but this is really kind of over my head and I get different things checking it while plugged into only the modem vs when I plug into the router. Can anyone help? The frustrating thing is that I had it working for awhile, so I know it can do it!

  Read the article

• retain last used path to location for saving files in Windows 7

  - by Mark Miller

  I am using Microsoft Office 2010 and Windows 7 on a Dell PC. I am opening a bunch of MSWord files one at a time, copying data tables therein, pasting the data into Excel and saving the Excel files as comma delimited text files. I am creating a separate Excel file for each MSWord file. The path to the folder containing the saved comma-delimited files is quite long, something like this: c:\users\me\aa\bb\cc\dd\ee\ Every time I open Excel and save a new comma-delimited file I have to re-navigate the entire path (c:\users\me\aa\bb\cc\dd\ee). In the past Windows seemed to remember the last used path, saving a lot of tedious key-strokes. In fact, I think Windows did this for me as recently as last week, albeit on a different computer. Can I apply a setting in Windows somewhere asking it to offer the last used path as a default when saving files so I do not have to re-navigate the entire directory structure to save each new comma-delimited file? If I can, how so? Where is the option for specifying that setting? Thank you for any help.

  Read the article

• De-duplicating backup tool on a block basis? [closed]

  - by SST

  I am looking for an (ideally free as in speech or beer) backup tool for Unix-like OS which can store deduplicated backups, i.e. only nonredundant content takes up additional space. I already looked at dirvish (my first candidate) and rsnapshot which use hardlinks to achieve deduplication on a per-file level. However, as I want to back up large files (Thunderbird mailboxes 3GB, VMware images 10GB), such file are stored again entirely even if just a few bytes change. Then there are rsync-based tools like rdiff-backup which only store deltas and a current mirror. However, as the deltas are generated against each previous mirror, it is difficult to fine-tune the retention granularity (only keep one backup after a week, etc.) because the deltas would have to be re-evaluated. Another approach is to partition content into blocks and store each block only if it is not stored yet, otherwise just linking it to the first occurrence. The only tool I know of that does this by now is obnam (http://liw.fi/obnam), and it even supports zlib-compression and gpg-encryption -- nice! But it is very slow, AFAICT. Does any one know any other, solid backup software which supports deduplication on a sub-file level, ideally with at least some management options (show/select/delete generations...)?

  Read the article

• Strange boot problems on 6 month old setup

  - by Balefire

  I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

  Read the article

• Noisily rendered text in Firefox

  - by Notinlist

  It came to me in a week or so that certain pages (Facebook, StrackOverflow, some news sites) have text rendering errors in Firefox. As a workaround if I refresh the page, or simply select and deselect the buggy text, the unpleasant effect disappears. I don't have this effect in Internet Explorer or in any of my desktop applications. Windows 7 Pro 64bit (fresh) Firefox 19.0.2 (fresh) Ati Radeon HD 4600 Series (fresh drivers) Thanks for the help in advance! Update 1/2 I have only three addons: Forecastfox, Hungarian spell checking dictionary and Quick locale switcher. The latter two are installed after the effect appeared. I disabled the first individually and did not helped. But if I start my firefox with disabled addons I cannot reproduce the error. As far as I know this mode does not mean disabled plugins, which I do have (Adobe Acrobat, Citrix ICA Client, Google Earth plugin, Google update, Java Deployment Toolkit 6, MS Office 2010, MS Windows Media Player Firefox, Shockwave Flash, Silverlight, VLC Web). Update 2/2 If I disable all plugins and extensions I still have the problem. If I start Firefox with disabled addons then I cannot reproduce the problem.

  Read the article

• Get the Windows Scheduler's Location Or Code?

  - by Ram

  Today i got a task to find the scheduler that is running once in a month, actually I have to change its running time period to once a week. I have searched for it in the Windows scheduled tasks, but i didn't find it. It is sending a mail containing a link. Now i am not confused about this where else can i find it. As the place i know where the scheduler can be, has already been checked by me. Can someone suggest me where else can i search for this scheduler? As per the previous developer's comment "It is a normal Windows method of scheduling tasks" UPDATE Actually the task is running after a month periodically. As per my knowledge it could be a "Windows Task Schedule" or "Windows Service" created by the old developer. Now as the previous developer is not available and i do not have any documentation.. i need to change the time period from month to weakly. I have checked in the "Task Schedules" on the server and checked the services running ob the server and was unable to find the "Scheduler". now i have two questions: is there any other approach by using that i can schedule an automated email periodically. any idea to find this.

  Read the article

• Ubuntu odd mouse and keyboard behavior when window gains inner focus

  - by Scott

  This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

  Read the article

• ADSL2+ - High sync-rate, good line attenuation, but low noise margin and slow speeds

  - by Mark Pim

  I've been with my ISP (IdNet) for a few months and have been getting some good speeds, but in the last week the speed has dramatically decreased (from 15 Mbps+ to around 0.2 Mbps). This happens at all times of day, not just peak periods. Obviously I've done all I can to isolate problems my end - only one PC is connected to the router (via ethernet cable) and no other background programs are using the network etc. I've raised the issue with the ISP and they've suggested trying a new ADSL filter to see if that is casuing the problem, but I thought it would also be good to get the opinion of superuser on possible causes or other troubleshooting I can do. Here are the juicy stats :) My router (Netgear DGN1000) reports: Downstream Upstream Connection Speed 17602 kbps 1062 kbps Line Attenuation 17.9 db 8.6 db Noise Margin 6.0 db 6.1 db I used RouterStats and it seems to show those figures stay fairly consistent all the time I ran the BT speedtest and it reported: download speed of 164 kbps, out of a max achievable of 21000 kbps upload speed of 859 kbps, out of 1048 kbps DSL connection rate 17719 kbps down and 1048 kbps up IP Profile of 15000 kbps Is there any more troubleshooting I can do? Does this look like a problem with my equipment / wiring or with BT's line? Any advice would be great :)

  Read the article

• Locked out of our Comcast Business Gateway for seemingly no reason

  - by Tyler

  A little backstory... Last fall we migrated our ISP from AT&T to Comcast at one of our offices. At that time, we received a new modem/router from Comcast and we configured everything to our liking. We've never really had very many issues with the router aside from having to restart it every once in a while. Here's the problem... About three months ago I changed the password on the router from the default. After that, I logged into the router several times to make changes with no issue. During May I logged into the router to add two new static routes, no problems. A week ago, I tried to log into the router and could not. I tried the non-default password that I changed it to, the default, anything and everything I could think of and no luck. I restarted the router on Monday thinking it may just be locked up, but after the restart it would still not let me log in. This router is at our other office about 2 hours from here and I want to avoid having to drive down there and reset to factory defaults, reconfigure, etc. Any ideas?

  Read the article

• torrent downloads not showing on Squid log

  - by noobroot

  hello, i have just a few months working as sysadmin, hence i still have lots to learn, first thing id like to do is as follows: We have an OpenBSD 4.5 box acting like firewall,dns,cache etc, the box has 2 network cards, one conected directly to the internet and the other to our switch, i used to work with sarg for the log analysis but then changed to the much faster free-sa. I use a daily free-sa report to check the bandwidth usage and report our top 5 bandwidth consumers (3 days a week being #1 and you will be buying the pizzas :D, we are a small company ~20 so we are very familiar). this was working really good until recently, one of us required to download some stuff via torrent (~3GB) and since the pizza rule is active for non-work related downloads, he told me (verified) that his download was indeed work related so i would dismiss that 3GB off his quota, but to my surprise the log didnt showed that 3GB, since his ip consumption was only around 290MB. More recently, since the FIFA world cup started, we know that some of the employees are watching the match's streaming, we know it and we dont care about it since, like already stated, we are a small company so we dont have restrictive policies, we all can chat, watch youtube, download anything we want BUT we are only allowed 300MB a day otherwise you'll get in the top5-pizza-board, anyway, that streaming consumption is also not showing in the free-sa reports. So my question is, why is these data being excluded from the reports? im thinking that the free-sa reports list only certain types of things but im also thinking if are the squid logs the ones that are not erm... logging these conections. Any help, guide, advice or clarification is appreciated.

  Read the article

• On Ubuntu get: "-bash: ./flume No such file or directory" BUT flume is there and executable. Same binary OK on RHEL

  - by lcbrevard

  This is already posted in serverfault - and may be more apprpriate there. Reworked a bit from the orginal posting. We have a product built on CentOS 4 32-bit Linux that runs unmodified on 32- and 64-bit CentOS/RHEL 4 and 5 and SLES 10. It also runs unmodified on SLES 9 64-bit. [SLES 9 32-bit requires a different libstdc++.] The name of the main binary executable is 'flume' Yesterday we tried to put this on 64-bit Ubuntu 10 and, even though the file is there and the right size, we get: -bash: ./flume: No such file or directory 'file flume' shows it to be a 32-bit ELF (can't remember the exact output and the system is on an isolated network) If put into /usr/local/bin, then 'which flume' returns: /usr/local/bin/flume The file is marked as executable (did 'chmod +x flume') and lsattr shows no problems with attribute bits. I was not able to try 'ldd flume' yet. I have also not tried 'strace flume'. Currently I am with an air conditioning failure. [It's been that kind of week!] I now suspect that some library is not there. This is a profoundly unhelpful message and one I have never seen before. Is this peculiar to Ubuntu or perhaps just to this installation. We gave up and moved to a RHEL 4 system and everything is fine. But I sure would like to know what causes this.

  Read the article

• IDE compatability with SATA image

  - by Ormis

  We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

  Read the article

• Exchange on SBS2003 not receiving mail, but sending via telnet works

  - by YDdraigLas

  Last week we had a problem on our SBS2003 server where our external connection dropped out and I was only able to restore it by running netsh winsock reset catalog and netsh int ip reset. Thinking all was well, I went home for the weekend and came in today to find that we haven't received any external emails since before the original problems occurred. There are plenty of examples of this on the internet, usually to do with a firewall issue, but the odd thing here is that when I connect using telnet I can send an email and it goes straight through and into my inbox. When I send an email from Gmail or Hotmail nothing comes through at all. Internal emails are also unaffected, as are outgoing emails. There have also been a couple of emails that have come through for other users, both out-of-office replies, if that's relevant. I've run the CEICW several times, checked all the NIC settings, but no joy. Before I give up trying to fix this and reinstall the whole server, has anyone come across this problem before? I have only found fleeting references to this in previous searches and no real answers. Any advice gratefully received.

  Read the article

• Public Folders - Delete Public Folders from 2003 after migrating to 2010 (via Adsiedit) - safe?

  - by HeavenCore

  Similar Question: How do I delete a public store in Exchange 2003? We are ready to remove our Exchange 2003 server after having migrated all public folders and mailboxes to 2010. We ran for a week with the exchange 2003 server shutdown and everything seemed to work. When I try to delete the PF database from 2003 it says it contains replicas. Whilst migrating i only had one was sync working (from 2003 to 2010) so i believe that 2003 hasn't received the responses from 2010 saying replica removed. When I look in Public folders on the 2003 box none are listed, when i look in PF Instances they are all listed. I know everything has moved to the 2010 server and I know 2010 is not showing the 2003 server as a replica for any folders. I am looking to use ADSI edit to remove the Public folder database from the 2003 server, but want to ensure i am going to delete the right thing so that they do not get deleted from the 2010 database. Should i delete configuration, Services, Microsoft Exchange, Company Name, Administrative groups, First administrative group, Servers, Server name, Information store, First storage group, public folder store (Server name)? Or something else? I have checked and the only public folder with the old exchange server listed as a replica is SYSTEM CONFIGURATION. Thanks in advance.

  Read the article

• Apache APC (Windows) Can I optimize these APC settings more?

  - by ar099968

  I would like to optimize APC some more but I am not sure where I could do something. First here is the stats after 1 week of running with the current configuration: General Cache Information APC Version 3.1.9 PHP Version 5.4.4 APC Host XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Server Software Apache Shared Memory 1 Segment(s) with 128.0 MBytes (IPC shared memory, Windows Slim RWLOCK (native) locking) Start Time 2014/06/08 05:00:00 Uptime 6 days, 11 hours and 55 minutes File Upload Support 1 Host Status Diagrams Memory Usage Free: 99.7 MBytes (77.9%) Used: 28.3 MBytes (22.1%) Hits & Misses Hits: 510818 (99.9%) Misses: 608 (0.1%) Detailed Memory Usage and Fragmentation Fragmentation: 0.60% (609.8 KBytes out of 99.7 MBytes in 83 fragments) File Cache Information Cached Files 693 ( 35.4 MBytes) Hits 5143359 Misses 1087 Request Rate (hits, misses) 13.24 cache requests/second Hit Rate 13.24 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.01 cache requests/second Cache full count 0 User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters -/apc.php$, -/apc_clean.php$, -.tpl.cache.php$, -.tpl.php$, -.string.cache.php$, -.string.php$ apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 2M apc.num_files_hint 7000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 128M apc.shm_strings_buffer 4M apc.slam_defense 0 apc.stat 1 apc.stat_ctime 0 apc.ttl 7200 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 7200 apc.write_lock 1

  Read the article

• Windows 2008 R2 DNS cant resolve own SOA

  - by user46742

  We have two Domain Controllers for our network. They both run DHCP, DNS, and ADS. They are both VM's sitting on MS Hyper V Server 2008 on separate physical hosts. We had our primary DC go down a week ago. I upgraded an already existing VM to Primary DC and built a new VM for the secondary. Both DNS servers are running and the SOA is configured correctly for Primary DC 1. However when I run the best practice analyzer it states the server cannot resolve it's own SOA. Check the configuration in the adapter. I checked and they are configured properly. I also went through the DNS entries thoroughly and made sure there was no records of the previous DC that went down. NSLOOKUP resolves the domain and primary dc fine. I also checked the firewalls on the machines and our physical firewall for any deny packets. Any suggestions? I appreciate any help!

  Read the article

• Advice for UPC/Surge Protector in home office

  - by Fred

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• iPhone all day meeting request bug?

  - by RodH257

  We've come across a bit of a weird bug in the office. our office is closing for a week or so over christmas, and our admin staff sent a meeting request to everyone in the office to go from 5pm on the 23rd of December until we return to work at 8.30 on the 5th. However there was some confusion, as if you look at the image below, the same meeting request is showing up with different start times for some people. While most people get the 5pm date, for others it shows up as an all day event! Staff have been planning their activities for the 23rd only to find out that their calendar is wrong and they are required to work. With some investigation, we noticed that all of the people with the incorrect time own iPhones or iPads. So perhaps they accepted the meeting on their phones, and it has put the meeting in wrong? There are people with the correct one that have iPhones, but perhaps they are on ios4 still, or perhaps they didn't accept the meeting request on their phone. has anyone else come across this error at all? is there a fix?

  Read the article

• How to route outbound traffic to specific domain "XYZ.org" via a specific NIC or public/static IP?

  - by user139943

  Within the next week or so, I'll be setting up an AT&T U-verse modem with 5 usable static public IP addresses. I plan to register a domain name to 1 of the 5 static IPs (remaining 4 unregistered), and run a website from a single server setup in my home LAN. I'll skip the long winded reason why, but I need to somehow route outbound traffic (originating from my server) destined for one public domain (i.e. http://www.sample.org) through one of the UNREGISTERED static IP addresses ONLY. Basically, I want this public domain to see connections coming from an IP address and not my domain name. If it makes it easier, this can apply to all outbound traffic from my server as long as it doesn't impact users browsing my website! Inbound connections should go through the domain name / registered public IP. Can I accomplish this with my single server with one or multiple NICs? Do I need multiple servers and set one up as a proxy? Please help as my background is in software and not networking, and I don't think I can accomplish this at a software level (e.g. Java). Thanks.

  Read the article

• Best way to create and restore a Drive Image with Windows 7? [closed]

  - by jasondavis

  Possible Duplicate: Want to create a system image I am about to build a new PC. I am a windows 7 user. For years now I have been wanting to install windows and all my favorite software, music, etc., and then make a drive IMAGE and be able to go in 6 months later or WHENEVER I want to start fresh and completely format my drives and restore my IMAGE and have all my settings, programs, etc be just5 like when I created the original image. I know there is many ways to do this but I have never done this 100% successfully and I have about a week to figure out how to do it perfectly for when I build my new PC. I have heard good things about using tried Acronis true image in the PAST for doing what I describe4, I tried using it but, but the newer versions are overly complex and don't even seem to work the way I hoped. I also see that Windows 7 has some sort of drive IMAGE creator itself as well. Does the newer Windows 7 image creator do what I am describing above? If it does do what I am asking for (complete drive image with windows, all programs and settings) saved to an IMAGE file that can easily be restored to ANY hard drive in the future? Please share your experiences, tips, ideas on how to achieve this the easiest and most reliable way please

  Read the article

• php extensions & apache mods gone/not working after server restart?

  - by user1782359

  I was wondering if anyone has ever come across this before, as I'm pretty stumped to be honest, and my server admin knowledge isn't particular good so I'm not sure what could even be wrong, let alone how to fix it. Basically, Thursday last week everything was fine on our server. I come in on Friday and it's a mess: php extensions are missing/not working, apache modules are gone. (e.g. oci_* was gone completely, odbc_ not working but still there, the apache ntlm_auth for single sign on was gone and so the website wasn't even loading in IE). I'm ruling out anything deliberate because it's just incredibly unlikely. The only thing that really happened between thursday & friday is that on thursday evening one of the network guys did a RAM upgrade on the server and restarted it. That's it, nothing else. Now I'm wondering if somehow those extensions and such which we installed months ago were somehow only saved in a local memory of sorts, and a restart has wiped them? But we installed them all as root, so I don't see why it should be any different from installing anything else. It makes little/no sense to me. To expand on an example of something that's gone very wrong, the php odbc_ extension: It's still on the server, it doesn't return undefined function or anything. But it just cannot connect to the datasource any more. I've tested it through the command line and it's working perfectly fine with that datasource and login details, but all of a sudden having it in the php odbc_connect() function and it just can't connect. ( [S1000][unixODBC][FreeTDS][SQL Server]Unable to connect to data source. ) But unixODBC is set up fine. Like I say i've tested it all through the terminal and it can connect, and we've not changed anything, it's just now all of a sudden not working through the PHP function. Anyone have any ideas whatsoever as to what could be going on? This is on CentOS 5.x by the way.

  Read the article

• powershell vs GPO for installation, configuration, maintenance

  - by user52874

  My question is about using powershell scripts to install, configure, update and maintain Windows 7 Pro/Ent workstations in a 2008R2 domain, versus using GPO/ADMX/msi. Here's the situation: Because of a comedy of cumulative corporate bumpfuggery we suddenly found ourselves having to design, configure and deploy a full Windows Server 2008R2 and Windows 7 Pro/Enterprise on very short notice and delivery schedule. Of course, I'm not a windows expert by any means, and we're so understaffed that our buzzword bingo includes 'automate' and 'one-button' and 'it needs to Just Work'. (FWIW, I started with DEC, then on to solaris and cisco, then linux of various flavors with a smattering of BSD nowadays. I use Windows for email and to fill out forms). So we decided to bring in a contractor to do this for us. and they met the deadline. The system is up and mostly usable, and this is good. We would not have been able to do this. But it's the 'mostly' part that is proving to be the PIMA now, and I'm having to learn Microsoft stuff anyway until/if we can get a new contract with these guys for ongoing operations. Here's my question. The contractor used powershell almost exclusively for deployment, configuration and updating. My intensive reading over the last week leads me to think that the generally accepted practices for deployment, configuration and updating microsoft stuff uses elements of GPOs and ADMX templates, along with maybe some third party stuff like PolicyPak. Are there solid reasons that I've not found yet that powershell scripts would be preferred over the GPO methods? I'm going to discuss this with the contractor lead when he gets back from his vacation, and he'll be straight with me (nor do I think they set us up). But I can also see this might be a religious issue, so I would still like some background on this. Thoughts? or weblinks? Thanks!

  Read the article

• Computer freezes after watching Youtube videos

  - by Roberts

  I had Windows 7 installed all september. But I installed Windows XP Professional back because my computer couldn't handle the new OS. After first boot I tried to install newest flash player (from Adobe website), but it failed. I had my old setup on USB drive and it worked. I don't know is it important or not. I am watching Youtube videos in my free time (almost every hour). After few days the computer started to freeze when I open a page with the video or close the page with video, not while I watch a video. No BSODs. Nothing in Event viewer. I use Firefox only. When computer freezes the sound wont. If iTunes is playing a radio station or is it another video playing in background, the sound wont freeze. Last few days the mouse wont freeze. Its a strange symptom. If I click few times then the cursor will actually freeze. I just want to know where does this problem come from (hardware - graphics card, old motherboard or it's just some glitch in setups). If it's not graphics card then I will be happy. The graphics card is ATI Radeon HD 4650 - brand new. Catalyst 11.8 installed. Things I have tried: Installed newest flash player after a week (the setup didn't fail this time) Installed latest video drivers Deleting cookies Defragmenting hard drive Using TuneUp utilities for computer cleenup Installed latest Mozilla Firefox Cleaned the PC Changed CPU Fan speed almost to max (just to be sure) Things I haven't tried yet: Didn't try playing videos on other browsers What can I do now?

  Read the article

• Can SQL Server (2008) transaction logs handle the database being dropped and re-created?

  - by Ben

  We're trying to restore a database (created programatically by running a hand-crafted SQL script we have). Our backup routine is to create a full backup of every database on the SQL Server 2008 instance on a Saturday then automatic transaction logs (I assume these are created automatically anyway - we appear to have lots of log files, possibly one per transaction after the full backup was taken?). On Tuesday this week the database in question was dropped and another one with the exact same name and schema was created. SQL Server has continued to create transaction log files but it hasn't had chance to create a new full backup (that won't happen until next Saturday). Now as it turns out we need to restore the database to how it was on Thursday. This is after the "drop and re-create". My question is, is this possible? If it isn't, what exactly does SQL Server think that it's writing to those transaction logs created since the drop and re-create? (I understood they were kind of files containing a binary delta, which makes me think maybe we can restore from them?) I'm no DBA but then neither is our IT department, so I'm doing the best I can to resolve this. Any advice much appreciated!

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >