Search Results

Search found 4750 results on 190 pages for 'wireless adapters'.

Page 162/190 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Can Win32_NetworkAdapterConfiguration.EnableStatic() be used to set more than one IP address?

  - by Andrew J. Brehm

  I ran into this problem in a Visual Basic program that uses WMI but could confirm it in PowerShell. Apparently the EnableStatic() method can only be used to set one IP address, despite taking two parameters IP address(es) and subnetmask(s) that are arrays. I.e. $a=get-wmiobject win32_networkadapterconfiguration -computername myserver This gets me an array of all network adapters on "myserver". After selecting a specific one ($a=$a[14] in this case), I can run $a.EnableStatic() which has this signature System.Management.ManagementBaseObject EnableStatic(System.String[] IPAddress, System.String[] SubnetMask) I thought this implies that I could set several IP addresses like this: $ips="192.168.1.42","192.168.1.43" $a.EnableStatic($ips,"255.255.255.0") But this call fails. However, this call works: $a.EnableStatic($ips[0],"255.255.255.0") It looks to me as if EnableStatic() really takes two strings rather than two arrays of strings as parameters. In Visual Basic it's more complicated and arrays must be passed but the method appears to take into account only the first element of each array. Am I confused again or is there some logic here?

  Read the article

• Firestarted Blocking DHCP?

  - by Chiggins

  Alright so on my Ubuntu laptop I get a wireless internet signal, and then distribute it to a switch where my other computers are connected. I also have Firestarter installed on the laptop. I have a problem where the only way that one of my client computers try to get an IP and such from my laptop, it can't because Firestarter is blocking it somehow. I have to stop the firewall in Firestarter, then connect from a client. It connects right away, then I turn Firestarter back on. In the preferences there is an option in "Firewall" called "Start/restart firewall on DHCP lease", but if I have that checked or not doesn't make a difference. So, what can I do to fix this? Its kinda annoying to have to do this whenever I have to connect to the internet. Thanks!

  Read the article

• No Drivers in Ubuntu 9.10

  - by Chris

  I have a Lenovo G550 and I installed Ubuntu on it through Windows and I have no drivers. No sound, no wireless. I previously had installed it through Windows Vista with no problems at all. I now run Windows 7 and cannot seem to get it to function properly. I tried installing the recommended drivers to make sure the proper ones were installed and that still did nothing. Any one have ANY idea what could be happening? I just don't feel like dealing with it.

  Read the article

• Printer recommendation

  - by Coding District

  Hi guys, I'm looking to buy a printer for home use and I'm not sure which one to get. I'm not very good when it comes to printers. Here's what I'm looking for: cheap (least $ per page) good quality (last longest, any specific brands to avoid?) not heavy printing (let's say ~5 pages per week) OK quality (I don't need "the best". I'm not going to print any photos but will need color) can scan, fax, and print I'm currently looking at these two since it's boxing day tomorrow and they're on sale: http://www.bestbuy.ca/EN-CA/product/id/10155178.aspx http://www.bestbuy.ca/en-CA/product/hewlett-packard-hp-officejet-wireless-all-in-one-inkjet-printer-4500-wl-4500-wl/10146663.aspx?path=14c256643988a02e34424eec10028145en02 Can I get some opinions about the above?

  Read the article

• Cross subnet connection [closed]

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• How can I tell if my ISP is redirecting my DNS queries?

  - by Nack

  I've attempted to use some DNS services like OpenDNS, and no matter what I do the DNS queries don't return the expected results. Watching the packet traffic on my firewall, I can see the queries go out to the intended DNS server address and responses coming back, but the results are not as expected, for example, the OpenDNS test page always fails even though the requests appear to be going to their servers. I suspect my ISP is intercepting DNS queries and sending them to their own servers. Is there a way to verify this? Is there something else I might be missing? I'm using 3G wireless service from Sprint.

  Read the article

• How can I set a network connection as metered?

  - by Sam

  I would like to set a network connection as metered. I can't find how to do this; it seems to have changed in the upgrade from Windows 8 to 8.1. I tried following the steps in the official metered connection FAQ. However, when I open the connection, there is no Data Usage heading nor a Set as a metered connection option. I tried this on two different computers, both running Windows 8.1. I also tried doing this for both wireless and ethernet adaptors. Here's what the connection screen looks like. I've cropped the empty space from the image. How can I set the connection to metered?

  Read the article

• Sharing files between multiple computers?

  - by Koalatea

  At my school, we have 13 iMacs that we use to make our yearbook. Currently our school has some servers for us, but since we work with so many files ( thousands of pictures, most of which are ~3MB ) it slows down far too much. Is there a way to better share files between our computers? We are on a wireless network and the whole school shares the same servers, we have around probably 400 computers in the school. Is there a hardware fix I can do? Something like buying an external and hooking only yearbook computers to it?

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Win XP cannot connect (or see) my wifi network, but can see others

  - by Jorre

  since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

  Read the article

• Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

  - by Moshev

  I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

  Read the article

• Remote HTTP to FTP

  - by jamd12

  I am on a very slow download with the internet that I have and unfortunately I only have access to expensive and slow wireless or satelite. I have set up an FTP with a computer supplier locally who has a nice 2 Mbps speed and am trying to set up a way of adding links remotely (Hotfile, rapidshare, Fileserve, etc.) so that they can be downloaded onto the FTP and then transfered a few times a week manually onto a portable HDD. On my home PC I use Internet download manager for all my downloads. Is there a simple way that I can add links remotely to Internet Download Manager on the FTP or perhaps another solution? The OS on the FTP is Linux - I use Windows XP SP3 and Windows 7. I have not used FTP very much before so any suggestions on how best to do this would be much appreciated.

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• small Windows network w/ printer issue

  - by user33666

  printer 1 connected to the desktop printer 2 connected to the same desktop that desktop is connected via Cat 5 to a wireless router a notebook is connected to that same router via WiFi The desktop Control Panel has just been reconfigured to share printers. (I assume this means that the desktop will now allow a notebook coming through the router to be able to access the two printers that are presently hooked up via the desktop--am I correct? Is that what it means?) The desktop can still print to either printer. It is presently okay. This notebook/printer relationship is a new configuration. The notebook, however, can't print at all (yet it can access the internet just fine). Any suggestions for it to be able to access the printers and be able to print via the desktop via the router? Thank you for any assistance.

  Read the article

• How do you unit test new code that uses a bunch of classes that cannot be instantiated in a test har

  - by trendl

  I'm writing a messaging layer that should handle communication with a third party API. The API has a bunch of classes that cannot be easily (if at all) instantiated in a test harness. I decided to wrap each class that I need in my unit tests with an adapter/wrapper and expose the members I need through this adapter class. Often I need to expose the wrapped type as well which I do by exposing it as an object. I have also provided an interface for for each or the adapter classes to be able to use them with a mocking framework. This way I can substitute the classes in test for whatever I need. The downside is that I have a bunch of adapter classes that so far server no other reason but testing. For me this is a good reason by itself but others may find this not enough. Possibly, when I write an implementation for another third party vendor's API, I may be able to reuse much of my code and only provide the adapters specific to the vendor's API. However, this is a bit of a long shot and I'm not actually sure it will work. What do you think? Is this approach viable or am I writing unnecessary code that serves no real purpose? Let me say that I do want to write unit tests for my messaging layer and I do now know how to do it otherwise.

  Read the article

• How can I connect a wired PC to the internet through my Macs wifi connection?

  - by David Weitz

  So I'll probably be buying a USB wifi adapater if I can't get this to work, but I'm trying. I have a wireless router at home and my Macbook Pro is connected to said wifi. My desktop doesn't have a wifi connection, but I've connected my macbook with my desktop via crossover cable. I enabled internet sharing on my macbook, but my Windows 7 desktop can't get a connection. I tried just regular file sharing and that works fine, but the internet sharing doesn't. I assume the goal is to get my PC to see my mac as the default gateway, but I've had no luck manually setting it. Here's the ifconfig output on my mac and my attempt at settings on windows: http://i.imgur.com/uJfUz.png

  Read the article

• Run a service after networking is ready on Ubuntu?

  - by TK Kocheran

  I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

  Read the article

• D Link DSL G624T Router will work wirelessly but not via cable

  - by Andy Fensome

  I have a D Link router which works in providing a wireless internet connection for my main PC and secondary notebook. I have been advised that the internet connection to the main pc will be better if I wire the router directly to the PC. I have tried this and can not get a connection. I just keep getting the message network cable unplugged. I have had the ethernet adaptor checked out on the pc and the cable is good ( also checked out). Anything I can do or do I have a bad router. I have tried the cable in all 4 ports and the message is still the same.

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• Opinion choosing Switch

  - by mastercode

  ) i have to reestruct a LAN network, with (currently) +/- 60hosts connected ... i have File Servers hosted, VoIP Phones,wireless AP's,printers, scanners, plotters,biometric dispositive,and 2 QNAP TS412 as FileServer and BackupServer, a Mac Mini as main Server of almost all services that need server ... and, a HP V1910-24 (L2+) and another two switches,but, only L2. which switch in your opinion, could fit better this reestruct, to ensure a VLAN division- and have to support Inter VLAN routing also - provide better performance, and also, allow a Future expansion. the budget, is low xD hehe!!

  Read the article

• cannot using internet in VMWare

  - by user66247

  I am using VMware Workstation version 7 on Ubuntu 10.10. I installed Windows XP service pack 3 for guest os. Within VMWare, I am using bridge connection that I assigned static IP address to be able to ping host IP address but I cannot ping default router gateway. I also tried to command "/etc/init.d/vmware start" on terminal. All tasks are able to start successfully except "VM communication interface socket family" I am not sure that how to setup network for my VMWare by using wireless. Thanks in advance.

  Read the article

• wifi key masking

  - by Warren Bullock III

  Hello, We currently utilize wifi access in some of our buildings, we are not using RADIUS at this point, but we are using WPA2 with PKI, the issue has recently come up that we want to keep our key private so we generally setup access for our users providing them the wifi key. The problem is that windows seems to give the option to go back into the wireless properties and unmask the PSK. We need to resolve this ASAP is there a way to make certain that the PSK remains masked regardless even if your logged in as a local administrator to the machine? Thanks in advance.

  Read the article

• Not getting my normal internet speed but my other computers can?

  - by Dennis

  I have Comcast Xfinity and I cannot reach anywhere near my promised speed. My family desktop which is hardwired into the router reaches to 60Mbps and so do my parents computers and my brothers. I cannot seem to get anywhere close to it, I know with being wireless I won't reach it, but I should at least get somewhere close. I can only pull 6Mbps and thats terrible for what I should be receiving. Any clue what could be wrong here? Edit: I have 100% signal and I'm not behind any walls

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >