Search Results

Search found 19768 results on 791 pages for 'hardware programming'.

Page 163/791 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

  • Is my motherboard failing, or is there some other issue?

    - by ThatGuy
    So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

    Read the article

  • Power outage during disk wipe. What do I do now?

    - by Mark Trexler
    I was using Roadkil Diskwipe on an external hard drive and the power went out. I had removed it from any outlet connection by the time power was restored to prevent power-spike damage (it's on a surge protector, but I didn't want to rely on that). My question is, where do I go from here? Obviously I don't care about preserving any data currently on it, I just want to make sure the drive itself is not terminally damaged. I'm running chkdsk (full), but I don't know if that's the correct step to assessing any damage. If it makes any difference, the hard drive was unallocated at the time of the outage, as Diskwipe requires that for it to run. Also, could something like this cause latent problems with the drive itself (i.e. serious issues that I won't be aware of when testing it now). I'd appreciate any program recommendations if chkdsk is not the most appropriate diagnostic route. Thank you.

    Read the article

  • Can I charge USB devices from a powered hub that isn't connected to a PC?

    - by Anodyne
    This will probably sound familiar to most of you... In my home, we have a whole bunch of devices that can be charged via USB (two iPhones, a BlackBerry, an iPod Touch, etc ad nauseam). We also have a bunch of USB chargers, each of which has a single USB port on it. I'd like to have something permanently connected to AC power with at least 4 USB ports on it, so we can just plug devices in and don't need to go looking for a free outlet. So here's the question: if I buy a powered USB hub, will that do the job even if I don't connect it to a PC? Ideally if you have a hub that you can personally verify will be suitable, let me know the manufacturer and model :-) Thanks in advance! EDIT: The solution I eventually went for was this: Kensington 4-Port USB Charger for Mobile Devices (Europe) There's also a US version here: Kensington 4-Port USB Charger for Mobile Devices (USA) It arrived yesterday, so I used it to charge the following devices, all at the same time, overnight last night: 32GB iPhone 3GS 16GB iPhone 3G First-generation iPod Touch Kensington Portable Power Pack for Mobile Devices I can't say anything about the charging speed (as I left it overnight) but all devices were fully charged this morning.

    Read the article

  • Complete machine freezes...at a loss

    - by user28818
    Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

    Read the article

  • USB 3 to Gigabit Ethernet adapters: where are they?

    - by intuited
    I'm looking for an adapter that will let me use a USB 3 port as a Gigabit Ethernet port. This is proving surprisingly hard to find! Is there some reason why this product is either unavailable or very obscure? Is there an online shop (US/Canada) where I can buy such an item? Newegg, TigerDirect, NCIX, etc. do not seem to carry such an item. I find this surprising since it will provide at least double the bandwidth (possibly quadruple) compared to a USB 2 Ethernet adapter.

    Read the article

  • Why does everybody have the same MAC address as me?

    - by iblue
    I just bought some consumer-grade McCheap PCI-E NICs (and this was a bad idea). They both have the same MAC address. When I google it, it seems like every card of that company has the same address: 00:50:43:00:45:3e. Shouldn't they be unique? According to lspci it's a Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20). Is there a way to permanently flash a new address?

    Read the article

  • Scanner Dayly Duty Cycle

    - by Juanp
    I'm comfused with the concept of 'Daily Duty Cycle'. For example if I have a scanner that the spec is: PPM (pages per minute): 90 and DDC (Daily Duty Cycle): 800. and I am interested in scanning ONLY 10hours continuously, what would it be the best choice: 90 * 60 * 10 = 54.000 or (800 / 24) * 10 = 333 It is very different results. what would it be the best option?

    Read the article

  • PC has a mind of it's own.

    - by ULTRA_POROV
    When I put my PC into standby, sometimes it randomly awakes, scaring me and waking me up. What could be causing this. No it is not my mouse moving, it can only be powered back on by the power button. It's really strange.

    Read the article

  • Why does my drive show as 180GB used, but copies only 40GB?

    - by Manuel
    My computer crashed, so I removed the drive (with Windows XP Professional 32-Bit) and put this drive in another computer running Windows 7 64-bit. Booting with Win7, when going to My Computer it is showing the XP drive as more than 180GB used. So as a quick backup, I'm trying to copy all the disk's content to a folder, but when I start copying, it's showing only 40 GB as the total size of the files to copy. I enabled showing system and hidden files in View options. What could be the problem?

    Read the article

  • My monitor made a noise and is now dimmer - can I repair this myself?

    - by Ross
    I have a Samsung SyncMaster T190 LCD monitor which I've had for about 5 years. It hissed slightly then went dim (readable but the top half of the screen is less bright). I'm pretty sure that after 5 years of service it's just got to the point where something's burned out, so my question is can I repair this myself, or should I just get a new monitor. I'm currently a student so self repair would be a better option if cost effective.

    Read the article

  • How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

    - by Usagi
    So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

    Read the article

  • A Versatile Physical Server

    - by Paul
    How does one judge potential memory and processor needs for linux web servers? Specifically, given: A Debian or Ubuntu OS Running a web server (apache2), and A database (MySQL), and A DNS server (bind), and Being used by up to 100 concurrent users, at some points each downloading high-resolution (0.5 to 1 MB) images via a web app. How much should one budget in terms of RAM, type of processor(s), and number of cores? Thanks!

    Read the article

  • Is PCI Express x4 faster or slower than a standard PCI slot for graphic cards?

    - by Stephen R
    I am looking at potential motherboards for a computer I want to build and ran into this conundrum. The motherboard has two PCI Express slots that allow for 16 channel cards to fit in them. The catch is only one of them operates at 16 channels, the other operates only 4 channels. My question is, would it be faster to buy a PCI Express graphic card and install it in the 4 channel PCI Express slot? Or would it be better to buy a standard PCI graphic card and install it in one of the available PCI slots?

    Read the article

  • Re-cased my computer now the power plug keeps shorting

    - by dunc
    I've just re-cased my computer. I got the new case free and thought I'd be able to swap everything over myself but apparently I've done something wrong. I'm OK with components generally but wasn't totally confident about doing this. So, my question is, when setting up a new PC or moving old components into a new case, what could I have done which causes the power cable plug to short/fuse when I plug it in?. Is this likely to be an issue with the cables from my PSU, or could it be the internal case connectors? What steps would you take to diagnose the problem? I'd rather not start again if I don't have to...! Thanks in advance,

    Read the article

  • Laptop powering off after 10 mins or so

    - by Jack
    I have no OS installed, and I am trying to use a linux boot disc. However it is not a linux problem....if I just leave the computer on at the no operating system found message, it still turns off. I thought maybe it was overheating, but I am 90% sure that is not the problem. What else could cause this? I should have mentioned, it's a laptop.

    Read the article

  • Low-profile, PCI Express, x1 video card with VGA-out?

    - by Dandy
    I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

    Read the article

  • SDcard /dev/sdb2 is apparently in use by the system; will not make a filesystem here

    - by user171223
    I divided my sdcard into 2 partitions, but It got an error and couldn't create a new partition. Error: /dev/sdb2 is apparently in use by the system; will not make a filesystem here! My /dev/sdb was not mounted, and the output of command lsblk was: cxphong@cxphong:~/Desktop$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sr0 11:0 1 1024M 0 rom sda 8:0 0 465.8G 0 disk +-sda1 8:1 0 118.8G 0 part +-sda2 8:2 0 147.7G 0 part /media/DATA +-sda3 8:3 0 137.1G 0 part +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 1023M 0 part [SWAP] +-sda6 8:6 0 61.2G 0 part / sdb 8:16 1 3.7G 0 disk +-sdb1 8:17 1 70.6M 0 part +-sdb2 8:18 1 3.6G 0 part +-sdb1 (dm-0) 252:0 0 70.6M 0 part +-sdb2 (dm-1) 252:1 0 3.6G 0 part I couldn't delete /dev/sdb1 (dm-0) & /dev/sdb2 (dm-1). What are they?

    Read the article

  • Can software operation damage an SD card?

    - by Borek
    My SD card has a broken boot sector and the tools I've tried say that it's not repairable (I've tried TestDisk, DriveRestore Pro and Easeus Partition Recovery). The card was in my Android phone and at one point, it simply shut down and I had to reboot it. After I rebooted it, the SD card was not recognized and since then I've tried to recover it (I don't want to format the card as it contains some data I'd like not to lose although it's nothing critical). My question is, can some software error in Android, or a sudden crash of a system, damage the SD card? Or was it the other way around, the card first died and it brought the system down?

    Read the article

  • If a change the CPU, must I reinstall the OS?

    - by dag729
    Hi, as suggested by the title, I want to change CPU: actually I have two computers, one with Ubuntu running on an AMD Athlon 64 dual core 5200+ and the other with FreeBSD running on an AMD Sempron single core LE-1250. I would like to swap (I am not sure that this is the correct term...) the CPUs from one computer to the other one, that is take the dual core from the ubuntu pc and put it inside the freebsd pc and viceversa. The mobo is the same. Do you think I will encounter problems?

    Read the article

  • Using a degrading corrupted hard disk with a brand new one. Is this ok?

    - by EApubs
    My old 500 GB hard drive started to give bad sectors. Its slowly going down. So, I bought a new 1TB Seagate drive. I first attached the 500GB drive as the first primary drive and installed Windows. I want Windows boot loader to be placed in the old drive so it won't conflict with the Linux system. But the actual Windows system (Including the C drive) is placed on my new hard drive. After this, I attached the new drive as the primary and installed Linux. Now if I want to re install windows, I can do it without any issues by simply setting the old drive as the primary. So the Linux system will be untouched. But is it a good idea to set things like this? Will the old degrading drive have an impact on the new one? The old drive is slower than the new one. Won't I be able to get the maximum speed out of the new drive even when its used to install everything (including the OS)? PS : When I ran the Windows Experience Index, I was using the old drive as the primary. Did it got the hard drive ratings from the old drive? What if I run it now with the new drive as the primary?

    Read the article

  • Proper approach to debug PC startup problems (POST)

    - by saurabhj
    My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

    Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >