Search Results

Search found 6425 results on 257 pages for 'master man'.

Page 163/257 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

  • IPV6 causing issue with DNS

    - by Mike Wells
    I have set up an 'internal' DNS at my work, basically we have ourdomain.com that is for internet, email etc and I have created on one of our linux network servers (debian) a DNS using bind9 with the domain ourdomain.inc. So based on my files below and the symptoms I'm describing; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup. These are the critical (I think) files I have modified: named.conf.local zone "ourdomain.inc" { type master; file "/etc/bind/zones/ourdomain.inc.db"; }; zone "201.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.201.168.192.in-addr.arpa"; }; named.conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 1.2.3.4; //IP of our external DNS provider }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; ourdomain.inc.db $TTL 86400 ourdomain.inc. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401 28800 3600 604800 38400 ) serv1 IN A 192.168.201.223 serv2 IN A 192.168.201.220 serv3 IN A 192.168.201.219 ns1.ipower.com. IN A 1.2.3.4 ns2.ipower.com. IN A 1.2.3.5 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. svn IN CNAME serv1 docs IN CNAME serv2 jira IN CNAME serv3 confluence IN CNAME serv3 fisheye IN CNAME serv3 rev.201.168.192.in-addr.arpa $TTL 86400 201.168.192.in-addr.arpa. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401; 28800; 604800; 604800; 86400 ) 223 IN PTR serv1 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; I then made our internal DNS my preferred DNS with the two external DNSs the next in-line. More the most part this seems to work, I can ping svn.ourdomain.inc and it resolves to the correct IP, I can also ping google.com and it also resolves no problem. So all seem good. However, periodically (couple of times a day at least), I loose the ability to ping the svn.domain.inc (and all others defined under the internal DNS). What seem to fix the issue temporarily is to disable IPV6 on the network adapter of the client machine and then re-enable it. Then it works for a bit but will always fail again. System Info Internal DNS Distributor ID: Debian Description: Debian GNU/Linux 6.0.6 (squeeze) Release: 6.0.6 Codename: squeeze Linux 2.6.32-5-686 i686 BIND 9.7.3 PC OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 System Type: x64-based PC Network Card(s): 2 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller Connection Name: WORK LAN DHCP Enabled: No IP address(es) [01]: the.ipv4.address [02]: the:ipv6:address The question... So based on my files above and the symptoms I described; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup.

    Read the article

  • How to stop nginx on Mac OS X

    - by Alex Kaushovik
    I've installed nginx server on my Mac from MacPorts: sudo port install nginx. Then I followed the recommendation from the port installation console and created the launchd startup item for nginx, then started the server. It works fine (after I renamed nginx.conf.example to nginx.conf and renamed mime.types.example to mime.types), but I couldn't stop it... I tried sudo nginx -s stop - this doesn't stop the server, I can still see "Welcome to nginx!" page in my browser on http://localhost/, also I still see master and worker processes of nginx with ps -e | grep nginx. What is the best way to start/stop nginx on Mac? BTW, I've added "daemon off;" into nginx.conf - as recommended by various resources. Thank you.

    Read the article

  • MySQL Cluster Failover doesn't work

    - by Lukasz
    I have two servers, where First server 10.100.15.150: 1. one mgm server 2. one ndbd 3. one mysql api Second server 10.100.15.160: 1. one ndbd 2. one mysql api When i start all 'parts' of cluster it looks : Cluster Configuration [ndbd(NDB)] 2 node(s) id=21 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0) id=22 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17, Nodegroup: 0, Master) [ndb_mgmd(MGM)] 1 node(s) id=3 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) [mysqld(API)] 2 node(s) id=11 @10.100.15.150 (mysql-5.1.56 ndb-7.1.17) id=12 @10.100.15.160 (mysql-5.1.56 ndb-7.1.17) When i shutdown first machine - 10.100.15.150, on second the nbdb process also has been shutdown so i cannot use this data node and cluster fail ... How i must configure this cluster to get FailOver working ? Thx

    Read the article

  • Installing the Apple Root Certificate Authority on CentOS CLI

    - by Daniel Hollands
    I could be barking up the wrong tree here, but I'm looking for help on installing Apple's Root certificate (http://www.apple.com/certificateauthority/) on a CentOS server via the command line - which I need to send messages to their APNS system. The code I'm using for this purpose is a variation on this: https://github.com/jPaolantonio/SimplePush/blob/master/simplepush.php - which works perfectly well on a Windows server, but as soon as we try to use it on a CentOS one, it falls over. We're lead to believe this has something to do with not having the CA installed on our CentOS box - but all efforts to do so have failed. As the CentOS server is headless, we need the ability to do this via the commandline. Can someone help?

    Read the article

  • DNS Zone file and virtual host question

    - by Jake
    Hi all, I'm trying to set up a virtual host for redmine.SITENAME.com. I've edited the httpd.conf file and now I'm trying to edit my DNS settings. However, I'm not sure exactly what to do. Here's an snippet of what's already in the named.conf file (the file was made by someone else who is unreachable): zone "SITENAME.com" { type master; file "SITENAME.com"; allow-transfer { ip.address.here.00; common-allow-transfer; }; }; I figure if I want to get redmine.SITENAME.com working, I need to copy that entry and just replace SITENAME.com with redmine.SITENAME.com but will that work? I was under the impression I needed a .db file but I don't see any reference to one in the current named.conf file. Any advice would be great and if you need more info to answer the question, don't hesitate to ask.

    Read the article

  • Is this a valid backup strategy for MongoDB?

    - by James Simpson
    I've got a single dedicated server with a MongoDB database of around 10GB. I need to do daily backups, but I can't have downtime with the database. Is it possible to use a replica set on a single disk (with 2 instances of mongod running on different ports), and simply take the secondary one offline and backup the data files to an offsite storage such as S3 (journaling is turned on)? Or would using master/slave be better than a replica set? Is this viable, and if so, what potential problems could I have? If not, how do I conceptualize this to work?

    Read the article

  • Mac OS X 10.5+ and POSIX

    - by Phil
    Hello, I need to program an authentication module that has to work with Mac OS X 10.6 Snow Leopard and at the same time needs to be POSIX-compliant. I read here: developer.apple.com/leopard/overview/osfoundations.html that since Mac OS X 10.5 Leopard, Mac OS X is POSIX-compliant (to POSIX 1003.1), but working under MAC OS X 10.5 Leopard myself, I can't find any trace of my user name neither in /etc/passwd nor in its successor /etc/master.passwd, which is mentioned here: developer.apple.com/mac/library/DOCUMENTATION/Darwin/Reference/ManPages/man5/passwd.5.html Instead it says in both files OpenDirectory Service is used, which should be OpenLDAP according to the OpenDirectoryService man-page. Is this still POSIX-compliant ? I guess not. I wonder how Mac OS X would handle my 100% POSIX-compliant code which depends on /etc/passwd ? I would be gratefull if someone could explain the way this works to me. Thank you for your time and trouble. Best regards Phil.

    Read the article

  • Force Python to be 32 bit on OS X Lion

    - by sciencectn
    I'm trying to use CPLEX within Python on Mac OS 10.7.5. CPLEX appears to only support a 32 bit python. I'm using this in a python shell to check if it's 32 bit: import sys,platform; print platform.architecture()[0], sys.maxsize > 2**32 I've tried these 2 commands as suggested in man 1 python, but neither seem to force 32 bit: export VERSIONER_PYTHON_PREFER_32_BIT=yes defaults write com.apple.versioner.python Prefer-32-Bit -bool yes The only thing that seems to work is this: arch -i386 python However, if I run a script using arch which calls other scripts, they all seem to start up in 64 bit mode. Is there another system wide variable to force it into 32 bit mode?

    Read the article

  • who wrote 250k tests for webkit?

    - by amwinter
    assuming a yield of 3 per hour, that's 83000 hours. 8 hours a day makes 10,500 days, divide by thirty to get 342 mythical man months. I call them mythical because writing 125 tests per person per week is unreal. can any wise soul out there on SO shed some light on what sort of mythical men write unreal quantities of tests for large software projects? thank you. update chrisw thinks there are only 20k tests (check out his explanation below). PS I'd really like to hear from folks who have worked on projects with large test bases

    Read the article

  • rsyslog forward all except ldap

    - by Brian
    I have Centos 6 servers running openLDAP. In the rsyslog.conf, I forward the logs to my central server with this line: *.* @10.10.10.10:514 openldap seems incredibly chatty. I have 3 servers in a multi-master cluster. Those 3 servers generate twice as many logs as my other 80 servers combined. I have been unsuccessful in figuring out how to tell openLDAP to use a sensible log level. (we never specifically set the log level) Since these are my main authentication sources, I'm a bit hesitant to "play around" with them. Is there a way to tell rsyslog to forward everything EXCEPT LOCAL4?

    Read the article

  • Tracking the linux config with git: how?

    - by Pierre
    I'd like to track my linux configurations with git. My idea is to have a branch for each server. /etc is not the only one directory to be tracked (I won't git init in '/etc' ) As far as I could see, it is possible to init a git for a distant directory. I tried this: # mkdir -p /git/.git # cd /git # git --work-tree=/ --git-dir=/git/.git init Initialized empty Git repository in /git/.git/ 1) Creating a new branch before everything is not possible # git branch server1 fatal: Not a valid object name: 'HEAD'. 2) adding a file in master/HEAD is not possible # touch README.md # git add README.md fatal: Unable to create '//.git/index.lock': No such file or directory how should I properly setup git to track my system-config ? Thanks. P.

    Read the article

  • Hard Drive upgrade advice for a Dell PowerEdge 1950

    - by user8185
    My setup is a Dell PowerEdge 1950 with 2x 140Gb Hard drives in a RAID 1 configuration. The OS is Windows 2003 Web Edition and disk is partitioned into to two, a 12Gb C: partition and the remainder is the D: drive. Both are very close to full capacity. Ideally I want to replace those drives with 2x 1Tb drives while retaining all data. First of all is this possible without rebuilding the server? If so, will I need any 3rd party software, Symantec Ghost, Partition Master for e.g., to do this? Any general advice as to how to go about doing this?

    Read the article

  • PHP-FPM runs PHP scripts as root

    - by fwalch
    I have a web server setup using nginx and PHP-FPM listening on a Unix socket. In my php-fpm.conf, I have specified user = www group = www When I run ps aux, I can see that the php-fpm worker processes run as www; the php-fpm master process runs as root. However, I noticed that PHP scripts are executed as root; at least that's the output of echo get_current_user(); What can I do to run scripts as the www user? How can this even happen if the worker processes run as www?

    Read the article

  • Meaning of tA tC and tP

    - by Greg Wiley
    If this is a duplicate I appoligize, but looking for two-letter strings is quite hard in any search. I'm looking for the meaning of tA tC and tP in the context of a mysql query. And in the spirit of "teaching a man how to fish" it would be great if you could point me in the right direction of where to find this info in the future. Edit: The Query $wpdb->get_row($wpdb->prepare("SELECT tA.* FROM ".AMYLITE_ADS." tA, ".AMYLITE_ADS_CAMPAIGNS." tC, ".AMYLITE_PACKAGES." tP WHERE tA.id=tC.ad_id AND tC.campaign_id=tP.campaign_id AND tP.zone_id=%d AND tP.date_end>CURDATE() GROUP BY tA.id ORDER BY RAND()", $zone->id));

    Read the article

  • Can't install Ubuntu 12 into VirtualBox (USB not recognized, ISO would not boot)

    - by wvxvw
    I'm trying out VirtualBox 4.18 and wanted to install Ubuntu 12 as a test. After installing VirtualBox (on Debian squeeze/sid), creating a virtual machine for Ubuntu and pointing it in Settings Storage IDE Controllers to the ISO with the proper version of Ubuntu, checked the "Live CD" option. Tried to define the IDE as master / slave, primary / secondary - all to no effect, and trying to boot this system, I'm getting to the screen which says: FATAL: could not read from the boot medium! System halted I've copied the same ISO to the USB stick, and I can boot from the USB (outside VirtualBox). I've looked at couple of tutorials / walk-through, there's nothing I can see that I would've done wrong. So, how would I configure it to boot from the desired ISO? Below is the snapshot with the current settings (sorry, I don't know how to get them as text).

    Read the article

  • Looking for internet traffic manager software for Windows 7

    - by Semyon Perepelitsa
    I have 128 KB/s (1 Mbit/s) internet connection. Not quite fast for downloading big files, but it is okay for internet browsing. When I start big file dowload, I cannot surf the web normally: pages appears slowly, especially pictures there. Therefore I pause downloading, but I'm regularly spending much time on reading articles or leaving the computer alone, when I can allow the file being dowloaded. Is there any software that can automize the process of pausing and resuming download or simply automatically regulate internet speed for each application using Internet? I download files using different software and protocols (Download Master for http, ftp; uTorrent for torrents; many other programs for updating themselves), so I don't want to be tied to particular program for downloading.

    Read the article

  • How to run django on localhost with nginx and uwsgi?

    - by user2426362
    How to run django on localhost with nginx and uwsgi? This im my config but not works. nginx: server { listen 80; server_name localhost; access_log /var/log/nginx/localhost_access.log; error_log /var/log/nginx/localhost_error.log; location / { uwsgi_pass unix:///tmp/localhost.sock; include uwsgi_params; } location /media/ { alias /home/user/projects/zt/myproject/myproject/media/; } location /static/ { alias /home/user/projects/zt/myproject/myproject/static/; } } uwsgi: [uwsgi] vhost = true plugins = python socket = /tmp/localhost.sock master = true enable-threads = true processes = 2 wsgi-file = /home/user/projects/zt/myproject/myproject/wsgi.py virtualenv = /home/user/projects/zt chdir = /home/user/projects/zt/myproject touch-reload = /home/user/projects/zt/myproject/reload This config work on my ubuntu server with normal domain (not localhost) but on localhost not working. If I run localhost in web browser I have Welcome to nginx!

    Read the article

  • An equivalent of IceCast but for Live Video Streaming ?

    - by Kedare
    Hello, I am looking for a solution to Stream live video like that : A camera/webcam/video output ---> Stream server ---> Clients And if possible multiple Stream Servers like this (like IceCast): A camera/webcam/video output --> Master Stream server +---> Slave Stream Server ---> Clients | `--> Clients | `--> Slave Stream Server ---> Clients `--> Clients The clients will be in flash, so I think RTMP should be a good protocol, I've heard of Red5, is it good for that ? Does it scale ? I would like to get statistics (Amount of clients, Bandwidth, etc), is it possible with red5 ? Do you know any other good solution to do that ? (Only free and if possible Open Source) Thank you !

    Read the article

  • No longer able to run photo software on XP

    - by Peter
    I have Olympus Master 2 and Photoimpression 6 on my system which is running with XP Pro. Both programmes ran fine till recently and neither now works. I have run Avira and AVG anti virus (only one loaded at a time), Superantispyware, Spybot and Malwarebytes and removed the usual dross but no help. I have also uninstalled and reinstalled both several times but again no help. Both programmes load but the Olympus one immediately passes to the usual 'its met a problem and needs to close'...Photoimpression loads fully but as soon as I go to the edit screen it gives the same message. I have tried another profile to no avail. Any idea why this is and what the solution is??

    Read the article

  • Resolving host names to their domain name in an internal BIND domain

    - by Adam Plumb
    I'm setting up a domain on my home network for learning purposes, using BIND on CentOS to act as the name server. I've got the name server up and running as type master for my internal domain (plumbnicoll.family), and can do forward and reverse lookups from other computers in my LAN. For example, host office2.plumbnicoll.family correctly returns office2.plumbnicoll.family has address 192.168.1.3. What I'd like is to be able to resolve just office2 to its address, without needing to put .plumbnicoll.family at the end. Is this possible, or even desirable to do? I'm running a mixed environment at home with both Linux and Windows computers.

    Read the article

  • Target on click

    - by 2x2p1p
    Hi guys. Look this code: <div> <a href = "#"><span>Click me MAN !</span></a> </div> <script type = "text/javascript"> window.onload = function () { document.body.addEventListener ("click", function (event) { var target = event.target; alert ("Returns \"" + target.nodeName + "\". Just want \"" + target.parentNode.nodeName + "\"") }, false); } </script> You can see the element "span" inside a "link", when the "link" is clicked the current target is the same "span". How can the "event.target" return "link" instead of "span". Thanks and no, I don't want to use "parentNode".

    Read the article

  • What is the current standard for authenticating Http requests (REST, Xml over Http)?

    - by CodeToGlory
    The standard should solve the following Authentication challenges like- Replay attacks Man in the Middle Plaintext attacks Dictionary attacks Brute force attacks Spoofing by counterfeit servers I have already looked at Amazon Web Services and that is one possibility. More importantly there seems to be two most common approaches: Use apiKey which is encoded in a similar fashion like AWS but is a post parameter to a request Use Http AuthenticationHeader and use a similar signature like AWS. Signature is typically obtained by signing a date stamp with an encrypted shared secret. This signature is therefore passed either as an apiKey or in the Http AuthenticationHeader. I would like to know weigh both the options from the community, who may have used one or more and would also like to explore other options that I am not considering. I would also use HTTPS to secure my services.

    Read the article

  • Mysqldump create empty sql file? [php & mysql on Windows]

    - by mysqllearner
    Hi all, I tried to dump a database: <?php $dbhost = "localhost"; $dbuser = "XXXX"; $dbpass = "XXXXXXXX"; $dbname = 'testdb'; $list = shell_exec ("C:\wamp\bin\mysql\mysql5.1.33\bin\mysqldump.exe $dbname --user=$dbuser--password=$dbpass > dumpfile.sql"); ?> I tried both specified full path to mysqldump.exe or just use mysqldump, it still give me a 0kb dumpfile.sql Details: Programming Language: PHP Database: MySql 5.XX OS(server): Windows Server 2003. (currently testing on Windows Vista machine) EDIT @ Jeremy Heslop: I tried: shell_exec("C:\wamp\bin\mysql\mysql5.1.33\bin\mysqldump.exe --opt -h $dbhost -u$dbuser -p$dbpass $dbname > test.sql"); safe_mode = off Still no luck man.

    Read the article

  • Postfix configuration w.r.t. port 25

    - by Monkey Boson
    After a considerable amount of research, I have configured my postfix server to use dovecot to accept SMTPS connections over port 465 and everything works swimmingly. Unfortunately, I forgot that, unless I listen to port 25, I'm not going to receive any e-mail from the net. I'm hoping somebody knows off the top of their head how to open up port 25 on Postfix for anonymous users, but disallow relaying and any other bad things on that port. And to leave the port 465 the way it is. As to my current configuration, I changed the master.cf file: smtps inet n - n - - smtpd and the main.cf file: # Use our SSL certificates smtpd_tls_cert_file = .....cer smtpd_tls_key_file = .....key smtpd_tls_security_level = may # Use Dovecot for SASL authentication smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination Any help is appreciated!

    Read the article

  • iPython in Emacs. Quick code evaluation

    - by AmV
    Hi all, I would like to "send" code snippets to a iPython interpreter in Emacs 23.2 (Linux). I have two related questions about this: Q1: I have learned that Emacs provides ('shell-command-on-region') to run selected regions in a shell. I have set setq shell-file-name to my iPython path, but when I run M-| after selecting a region, Emacs prompts me the following: Shell command on region: and if I then type RET, I get the iPython man page on the *Shell Command Output* buffer, without the region being executed. Why? Q2: Assuming that I have already started an iPython shell in some other buffer in Emacs, is there a way of selecting a region in another buffer and "sending" this region to the already-started iPython shell? Thanks!

    Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >