Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 164/1213 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Creating properly aligned partitions on a replacement disk

    - by Marius Gedminas
    I've a typical small office server with two hard disks configured for RAID-1 (mirroring). Each disk has several partitions: one for swap, the others paired in several /dev/mdX arrays. Every couple of years one of the disks dies and is replaced. The replacement typically goes something like this: # copy partition table from the remaining good disk to the empty replacement disk # (instead of /dev/good_disk and /dev/new_disk I use /dev/sda and /dev/sdb, as appropriate) sfdisk -d /dev/good_disk | sfdisk /dev/new_disk # install boot loader grub-install /dev/new_disk # create swap partition reusing the same UUID, so I don't need to edit /etc/fstab mkswap /dev/new_disk1 -U xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # hot-add the new partitions to my RAID arrays mdadm /dev/md0 -a /dev/new_disk2 mdadm /dev/md1 -a /dev/new_disk5 mdadm /dev/md2 -a /dev/new_disk6 mdadm /dev/md3 -a /dev/new_disk7 mdadm /dev/md4 -a /dev/new_disk8 The disks were originally partitioned with cfdisk back in 2009, and so the partition table is aligned traditionally to cylinder boundaries (255 heads * 63 sectors). This is not the optimum configuration for new 4K-sector drives. My question is: how can I create a set of partitions for the new disk and ensure they're properly aligned, and have correct sizes for my RAID arrays (rounding up is acceptable, I suppose, but rounding down is definitely not)?

    Read the article

  • Google earth will not reinstall

    - by chad
    I was trying to perform the the fix found at this link http://www.omgubuntu.co.uk/2012/01/how-to-make-google-earth-look-native-in-ubuntu It requires you to delete certain files from the /opt/google/earth/free folder and then add some new ones that you download. I deleted the files but the links to download the new ones were unusable. I was using gksudo nautilus so trash was disabled meaning I could not restore the files I had deleted. I the tried to go to the Google Earth website and reinstall it. I downloaded the .deb but when I tried to install it it gav me an error message saying "cannot install ia32-libs" I tried installing this via terminal and it gave me an error message saying chad@chad-Lenovo-G570:~$ sudo apt-get install ia32-libs [sudo] password for chad: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. How do I fix this? Now I am stuck without a functioning Google Earth. How can I fix this?

    Read the article

  • No audio in Adobe Flash

    - by Amey Jah
    I am on 11.10 64bit and I have installed flash from http://get.adobe.com/flashplayer/otherversions/. I had downloaded install_flash_player_11_linux.x86_64.tar.gz and moved libflashplayer.so to ~/.mozilla and ~/.mozilla/plugins I also have OSS installed because alsa does not work for me. I generally follow steps mentioned at https://help.ubuntu.com/community/OpenSound and everything works fine. But for 11.10, flash has no sound. I am not sure if that is OSS problem.

    Read the article

  • wifi problems with lenovo g580 on kubuntu-13.04-desktop-amd64

    - by user203963
    i have a wifi connection problem in lenovo g580 on kubuntu-13.04-desktop-amd64. ethernet cable is working properly but wifi does'nt connect below are some hardware information sudo lshw -class network gives *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:89:84:3d:e9:10 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:90500000-9053ffff ioport:2000(size=128) *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:17 memory:90400000-90403fff *-network description: Wireless interface physical id: 3 logical name: wlan0 serial: 68:94:23:fa:2c:d9 capabilities: ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.8.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn lsubs gives Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0489:e032 Foxconn / Hon Hai Bus 002 Device 003: ID 04f2:b2e2 Chicony Electronics Co., Ltd lspci gives 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Does anyone knows the solution? rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 3: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • Sony Vaio Webcam

    - by Martin H
    I have a in-built webcam in my Sony Vaio VGN-FE21M. lsusb shows me the device Bus 001 Device 003: ID 0ac8:c002 Z-Star Microelectronics Corp. Visual Communication Camera VGP-VCC1 and it is working within Skype most of the time. Sometimes, however, lsusb shows me the exact same output, but trying to test my cam in v4l2ucp I get the error Unable to open file /dev/video0 No such file or directory A reboot fixes the problem but I just can't pinpoint what the difference is between a working and a not working webcam and the time/instance this occurs. It would probably be a fix if i could unmount and remount the cam, but how can I do this with in-built devices? Any other advice is welcome as well.

    Read the article

  • How to control CPU frequency

    - by Tim
    I am using CPU Frequency Scaling Monitor 2.30.0 on the panel to show and control CPU frequency. My CPU frequency by default will change according to load. But I want to make CPU work at the lowest level and so I choose 800 MHz in CPU Frequency Scaling Monitor. After a few seconds, however, it automatically changes back to Powersave or Performance mode which has automatic adjustment to CPU frequency. I was wondering how to actually make CPU work at the lowest level? Thanks!

    Read the article

  • Should I reorder partitions regarding performance

    - by Marcel
    I have in principal 3 big partitions on my Netbook. One Windows, one for shared files, one for Ubuntu. I recently find out (using hdparm) the the hardisk seems to have much better perfomance on the first 2/3 (~ 60MB/s) than on the last 1/3 (~ 40MB/s). I am thinking to delete the second partition and create new partitions for "swap" and / directly after Windows. Does this effort make sense? I also wanna upgrade to 10.4/10.10 but keep the option to go back to the old system, so maybe I install ubuntu completely in a/this new partition?

    Read the article

  • New instalation with invalid signatures: NODATA 1 NODATA 2 error

    - by marcos nobre
    I am installing 13.04 into a VirtualBox machine. After installing, I receive this error after sudo apt-get update: Ign http://archive.ubuntu.com raring Release E: Erro GPG: http://archive.ubuntu.com raring Release: the following signatures were invalid: NODATA 1 NODATA 2 I have already tried: Install minimal server version; Install 12.04 desktop version; Everything gives me the same error.

    Read the article

  • Initializing Problem when using the Catalyst Control Center with fglrx

    - by Pierre
    I activated, or installed the Catalyst 11.8 driver, which is the non postrelease one, I think. When I go into Applications - Other - Catalyst Control Center, I get an error saying "There was a problem initializing Catalyst Control Center Linux edition..." Also, when I open up a terminal and use fglrxinfo I get a X error, it says BadRequest (invalid request code or no such operation). I'm not using Unity, I'm using Gnome Classic. Video card is a ATI Mobility Raedeon HD 5470.

    Read the article

  • Can I blacklist an appindicator?

    - by d3vid
    I've whitelisted some indicators for apps that don't yet have Unity-compliant appindicators. Is there any way to blacklist appindicators for apps that are Unity-compliant (not old-style indicators) but don't provide a "Don't show in the system tray" option? Any solutions to ban an appindicator from being displayed, GUI- or CLI-based, are welcome. (I'm not looking for a way to just hide them like you can hide system tray icons in Windows.) (New-style appindicators can't be removed from the systray-whitelist.)

    Read the article

  • Can't bind gnome-do to Super + Space or Ctrl+Alt+Space

    - by johnf
    With today's updates to 12.04 I can no longer bind gnome-do to either ctrl+alt+space or super+space. With 11.10 it wasn't possible to use super+space, on a fresh install of 12.04 super+space was working properly. Today it stopped working, if I try to bind control+alt+space then the controlkey shows up in the keyboard binding as Primary. I am running Unity, which in the past blocked super+space, it seemed to have stopped blocking it on 12.04. It shouldn't affect ctrl+alt+space. Configuring either binding produces the following error in the gnome-do output: libdo-WARNING **: Binding 'space' failed! libdo-WARNING **: Binding 'space' failed! I'm stuck binding to shift+alt+space.

    Read the article

  • Hot to get XChat to trust CA certificate?

    - by Silvio
    I have created an SSL certificate authority including a sub-authority to issue certificates. I have copied the root certificate to /usr/share/ca-certificates/extra and added it to /etc/ca-certificates, then ran dpkg-reconfigure ca-certificates and update-ca-certificates. After it said "Adding debian:.pem done." I am now fairly convinced that Ubuntu knows about my CA. Now I issued a certificate for the ZNC irc bouncer from the subca, installed it onto znc, but XChat will not trust the certificate despite all the above. I also issued a certificate to use with apache2 and that one works fine after adding the root ca to chromium. Does someone know how I can get XChat to trust the certificate?

    Read the article

  • apt-get 403 Forbidden

    - by Lerp
    I've start a new job today and I am trying to set up my machine to run through their Windows server. I've managed to get a internet connection through the server now but now I can't run apt-get update as I get a "403 Forbidden" error. This is for every repo under my source list, apart from translations(?). I do have a proxy in apt.conf, if I don't have it I get a 407 Permission Denied error. Here's my apt.conf file (I have omitted my username and password) Acquire::http::proxy "http://username:[email protected]:8080/"; Here's my sources.list #deb cdrom:[Ubuntu 12.04.2 LTS _Precise Pangolin_ - Release amd64 (20130213)]/ dists/precise/main/binary-i386/ #deb cdrom:[Ubuntu 12.04.2 LTS _Precise Pangolin_ - Release amd64 (20130213)]/ dists/precise/restricted/binary-i386/ #deb cdrom:[Ubuntu 12.04.2 LTS _Precise Pangolin_ - Release amd64 (20130213)]/ precise main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://gb.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise universe deb-src http://gb.archive.ubuntu.com/ubuntu/ precise universe deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ precise multiverse deb http://gb.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://gb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb-src http://gb.archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main I can sort-of fix this by changing all the http in sources.list to ftp but I still have issues with ppas

    Read the article

  • No GLX on Intel card with multiseat with additional nVidia card

    - by MeanEYE
    I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

    Read the article

  • How to reinstall Ubuntu keeping my data intact?

    - by Santosh Linkha
    I want to reinstall Ubuntu keeping my data intact. I have 160 GB hardrive (sata or pata I don't know but it's slim and made in China) with a 40 GB ext3 partition, a 4GB swap memory and 3 other partition with a FAT32 file system. I have around 4GB space on my drive where Linux is installed. I'd like to keep the data intact, especially the Downloads folder, desktop, and /var/www; And I no longer have access to any other machines or external storage devices.

    Read the article

  • ddclient - wont update Invalid Keyword for 'ip' =

    - by stueng
    /etc/ddclient.conf use=web, web=checkip.dyndns.org/, web-skip='IP Address' protocol=easydns ssl=yes server=members.easydns.com login=stueng password='****' home.***.** /var/log/syslog Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = '' Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: skipping update of home.***.** from <nothing> to 90.193.*.*. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: last updated <never> but last attempt on Mon Jun 4 13:01:57 2012 failed. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: Wait at least 5 minutes between update attempts. Help?

    Read the article

  • Configuring Multi-Tap on Synpaptics Touchpad

    - by nunos
    I am having a hard time configuring my notebook's touchpad. The touchpad already works. It succesfully responds to one-finger tap, two-finger tap and two-finger vertical scrolling. What I want to accomplish: change two-finger tap action from right-mouse click to middle-mouse click add three-finger tap functionality to yield right-mouse click action I read on a forum to use this as a guide. I have succesfully accomplished point 1 with synclient TapButton2=2. However, I have to do it everytime I log in. I have tried to put that command on /etc/rc.local but the computer always boots and logins with the default configuration. Regarding point 2, I have tried synclient TapButton3=3 but it doesn't do anything when I three-finger tap the touchpad. I am running Ubuntu 11.10 on an Asus N82JV. /etc/X11/xorg.conf: nuno@mozart:~$ cat /etc/X11/xorg.conf Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection /usr/share/X11/xorg.conf.d/50-synaptics.conf: nuno@mozart:~$ cat /usr/share/X11/xorg.conf.d/50-synaptics.conf # Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" EndSection xinput list: nuno@mozart:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=12 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=13 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=16 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? USB2.0 2.0M UVC WebCam id=10 [slave keyboard (3)] ? Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave keyboard (3)] ? Asus Laptop extra buttons id=14 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=15 [slave keyboard (3)]

    Read the article

  • Compile latest blender on ubuntu 12.0464bit?

    - by gabriel
    What i want is to compile latest blender from SVN. I am using this guide My issues are: How can i install it with the final .deb created file and how can i give this package to a ppa! So, when i execute sudo apt-get update; sudo apt-get install subversion build-essential gettext \ libxi-dev libsndfile1-dev \ libpng12-dev libfftw3-dev \ libopenexr-dev libopenjpeg-dev \ libopenal-dev libalut-dev libvorbis-dev \ libglu1-mesa-dev libsdl1.2-dev libfreetype6-dev \ libtiff4-dev libavdevice-dev \ libavformat-dev libavutil-dev libavcodec-dev libjack-dev \ libswscale-dev libx264-dev libmp3lame-dev python3.2-dev \ libspnav-dev it gives me this The following packages have unmet dependencies: libjack-dev : Depends: libjack0 (= 1:0.121.0+svn4538-3ubuntu1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I know that skype does not allow the installation of those libraries. Thanks

    Read the article

  • Dell Studio 1737 Overheating

    - by Sean
    I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

    Read the article

  • Cannot connect to Onda GSM phone using network-manager

    - by marcobra
    On Oneiric unstable fully updated/upgraded using network-manager broadband connection with: ID 19d2:1015 ONDA Communication S.p.A. I want some hints to make a Onda GSM usbkey 19d2:1015 work? route show me Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 usb0 link-local * 255.255.0.0 U 1000 0 0 usb0 It connects and the usb0 device get ip-address from the provider but I cannot get webpages (also typing a known ip in firefox) It seem to be something about routing default gw, there is no active firewall on this pc btw, all works using sakis3g or wvdial or gnome-ppp

    Read the article

  • how to get back the firefox apparmor profile after deleting it

    - by Judderwocky
    I deleted the apparmor profile for firefox when I was tinkering with it... and now I can't get it back. I uninstalled (complete) the apparmor program, profiles, etc. and when it reinstalled, i still don't get the profile back (ie. /etc/apparmor.d./usr.bin.firefox* ) I learned that the apparmor profile for firefox is actually a apart of the firefox package... but i uninstalled firefox and reinstalled it and i still didn't get the file usr.bin.firefox* ) Is there somewhere I can download the file manually?

    Read the article

  • Error during Edubuntu installation: process:226

    - by Chethan S.
    We recently introduced Edbuntu to a team of school teachers. One of them tried installing Edubuntu in their school computers and have reported us this problem. I have no answer for the problem. So can anyone help? One of the teacher's wrote: I was able to install edubuntu in some of the pc. But not able to install in PCs with celeron processor 2.40 GHz , 1GB RAM & HDD 40GB. Im getting error message: process:226 - Glib warning: getpwuid_r(): failed due to unknown user id(0)

    Read the article

  • FGLRX installation without main monitor

    - by Chris
    This is a spiritual follow up to this I am doing some modern OpenGL tutorials and I have found that MESA does not support openGL 3.0+, so I need to get back to FGLRX even if its given me grief in the past. Every time I have tried to install FGLRX drivers I generally get thrown to the terminal and have to do some recovery, etc. before I can get them to work. Problem is, now that my main monitor is borked, when I install FGLRX drivers I cannot boot to terminal. Question: How do I back up my current windowing so that when I (inevitably) lost my boot due to FGLRX installation, I can recover it with a livecd without reinstalling, and how can I install it without a main monitor?

    Read the article

  • offline installation of video plugins

    - by israel
    Please help I installed Ubuntu11.10 32bit in an IBMTP41 notebook, that is NOT connected to the internet, tried running video files such as .mp4,.flv,.avi,.Xvid, in Movie Player but it asks for plugins, see the list below mp4: MPEG-4 AAC decoder; H.264 decoder flv: SorensonSpark Video decoder; MPEG-1 Layer3(MP3) decoder avi: MPEG-1 Layer3 (MP3) decoder; MPEG video decoder XviD: AC-3 (ATSC A/52) decoder; XviD MPEG-4 decoder how do i donwload (from another computer with internet) and install all these plugins and their dependencies. I also want to install the VLC Media player and its dependencies I assume this is related to the restricted codecs and I have tried donwnload/install them with no success. I'll appreciate all ur help

    Read the article

  • Unable to get screen signal after purge FGLRX

    - by Boris
    I thought that my ATI driver was not running well so I wanted to re-instal it completely. I did: sudo apt-get remove --purge fglrx* sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon and after a boot I wanted to intal the ATI driver BUT at the boot no more signal to my screen. Since, every time I turn on my PC it gets to purple screen and then screen shuts down ! Note that: Even if the screen is off, PC seems to be running almost well: I m still able to use my network to access data shared with NFS. Using live USB I have no screen problem. I tried to plug my screen on an alternative output but it did not work. I tried CTRL+ALT+F1 while being on purple screen but it does not do anything, screen shut down anyway. I m going to try the SHIFT thing and learn from blackscreen wiki...

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >