Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 164/318 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • Win 7: Share internet connection via Ethernet and WiFi

    - by Anvaka
    I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

    Read the article

  • Win 7: Share internet connection via Ethernet and WiFi

    - by Anvaka
    I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

    Read the article

  • Function key emulator for Dell inspiron 6400 on external keyboard

    - by hardik988
    I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

    Read the article

  • RAID 1 not performing as expected

    - by Faken
    I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

    Read the article

  • Port forwarding not working properly

    - by sudo work
    I'm trying to host a small web server from my home network; however, I have not been able to successfully port forward ports to the local server. My current network topology looks like this: Cable Modem/Router - Secondary Wireless Router - Many computers (including server) The modem/router I'm using is a Cisco (Scientific Atlantic) DPC2100, provided by my ISP. The wireless router that I'm using as the central hub to my home network is a Linksys E3000. The computer being used as a server is running Ubuntu 10.04 Server Edition. The main issue is that I can't access the server remotely, using my WAN IP address. I have port forwarded my wireless router; however, I believe that I need to somehow set my modem to bridge mode. As far as I can tell though, this isn't possible. Here are the various IP address settings: DPC2100 WAN: 69.xxx.xxx.xxx Internal IP: 192.168.100.1 Internal Network: 192.168.7.0 E3000 IP Address: 192.168.7.2 Gateway: 192.168.7.1 Internal IP: 192.168.1.1 Internal Network: 192.168.1.0 Server IP Address: 192.168.1.123 Gateway: 192.168.1.1 Now I can do an nmap at various nodes, and here are the results (from the server): nmap localhost: 22,25,53,80,110,139,143,445,631,993,995,3306,5432,8080 open nmap 192.168.7.2: 22,25,80 (filtered),110,139,445 open (ports I have forwarded in the E3000)* nmap 69.xxx.xxx.xxx: 1720 open *For some reason, I can SSH into the server at 192.168.7.2, but not view the website. Here are also some other settings: /etc/hosts/ 127.0.0.1 localhost 127.0.1.1 servername ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/apache2/sites-available/default snippet <VirtualHost *:80> DocumentRoot /srv/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> ... </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> ... </Directory> ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> ... </Directory> </VirtualHost> Let me know if you need any other information; some stuff probably slipped my mind.

    Read the article

  • IP Connflict on network

    - by PSU_Kardi
    I keep getting an IP conflict on my home network and can't figure out why. I'm running a Belkin-N wireless router that has an Ethernet connection to my 360 and a wireless connection running to my laptop. It's WPA2 encryption and I have a nice password on my router consisting of letters , numbers and special characters. But for some reason I keep getting IP conflicts at night time...By the time I look into the problem I don't see anyone else on the network. Is my router giving me false positives?

    Read the article

  • Can I fully disable my PCIe Video/Graphics Card per BIOS/Software?

    - by Jook
    Because of a quite noisy fan of my HD6700 I was wondering, if I could fully disable my video card through BIOS or even some Software/Windows. Switching to Intel I7 2600 internal video helped already with the noise, but it would be great to have the HD6700 only build in, but not activated/powered. So that the fan could stay compleatly off. Of course, I could just remove the video card, but I would like to avoid that. Is there any way? My Mainboard is an ASUS P8H67-M Pro, with Intel I7 2600 and ATI HD6500

    Read the article

  • Apply SetEnvIf after Apache RewriteRule

    - by coneybeare
    I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

    Read the article

  • What version of Ubuntu to use for Desktop with 8Gb RAM?

    - by Alexander
    This may sound as a stupid question, but I am really interested whether Ubuntu Desktop i386 will be able to use all my available RAM. I want to use the latest, non-LTS version, 10.10. It says on the website that it's (i386) the Recommended version. I also recall that Flash Player had issues with 64 bit Linux. Also, the 64 bit version is listed in the Universal USB Installer as amd64. Does this mean that it's using instruction sets specific to AMD CPUs? (I have an Intel) Will it work fine with Intel? So which one to download and install? What to do to be able to use 8Gb of RAM?

    Read the article

  • Computer suddenly dies; screen displays weird flickering lines, then restarts

    - by Imray
    I've been having this terrible problem for a little while and just managed to get a picture of 'dead screen' for the first time and I am posting it to seek help. Randomly, at irregular intervals (typically once a week), while working on something (it's been different things every time) my computer will just suddenly go dead - the screen turns to exactly the picture below (the lines flicker a little bit), it hangs there for a few seconds and then restarts. Obviously this is extremely frustrating and I want to try to stop it. I've searched numerous postings with similar keywords but nothing exactly the same as mine. Does anyone have any idea what might be the cause of this? I would post all my system settings and installed programs but the list is long and I don't know how much relevance each item would be. If you'd like to know something specific, please comment and I'll let you know whatever you need. SPECS C:\Users\Imray>systeminfo Host Name: Imray OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Multiprocessor Free Registered Owner: Imray - Owner Registered Organization: Product ID: 00371-152-9333854-85895 Original Install Date: 06/09/1999, 5:45:21 PM System Boot Time: 22/03/2013, 8:58:18 AM System Manufacturer: Gateway System Model: DX4840 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 37 Stepping 2 GenuineIntel ~3201 Mhz BIOS Version: American Megatrends Inc. P01-A3 , 17/05/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume2 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 6,135 MB Available Physical Memory: 3,632 MB Virtual Memory: Max Size: 12,268 MB Virtual Memory: Available: 8,114 MB Virtual Memory: In Use: 4,154 MB Page File Location(s): C:\pagefile.sys Domain: WORKGROUP Logon Server: \\Imray-OWNER Hotfix(s): 4 Hotfix(s) Installed. [01]: KB971033 [02]: KB958559 [03]: KB977206 [04]: KB981889 Network Card(s): 2 NIC(s) Installed. [01]: 802.11n Wireless PCI Express Card LAN Adapter Connection Name: Wireless Network Connection DHCP Enabled: Yes DHCP Server: 192.168.2.1 IP address(es) [01]: 192.168.2.13 [02]: fe80::1df1:5399:6890:91f6 [02]: Microsoft Virtual WiFi Miniport Adapter Connection Name: Wireless Network Connection 2 DHCP Enabled: Yes DHCP Server: N/A IP address(es) Graphics Card Specs Name ATI Radeon HD 5570 PNP Device ID PCI\VEN_1002&DEV_68D9&SUBSYS_E142174B&REV_00\4&18A4B35E&0&0008 Adapter Type ATI display adapter (0x68D9), ATI Technologies Inc. compatible Adapter Description ATI Radeon HD 5570 Adapter RAM 1.00 GB (1,073,741,824 bytes) Installed Drivers atiu9p64 aticfx64 aticfx64 atiu9pag aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64 Driver Version 8.700.0.0 INF File oem1.inf (ati2mtag_Evergreen section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1920 x 1080 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xDFFFFFFF Memory Address 0xFBDE0000-0xFBDFFFFF I/O Port 0x0000D000-0x0000DFFF IRQ Channel IRQ 4294967293 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\atikmpag.sys (8.14.1.6095, 181.00 KB (185,344 bytes), 06/09/1999 5:59 PM)

    Read the article

  • Random Computer Crashes

    - by Josh W.
    Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

    Read the article

  • Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

    - by benwebdev
    I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

    Read the article

  • LAN connection suddenly domain_not_set.invalid

    - by Liam Coates
    I went to work today - internet fine as always. Came back, dreaded yellow triangle. I can connect wirelessly like i am now on my tablet. Thats completely fine. But through LAN I get the domain_not_set.Invalid message if I renew my IP for example. It seems I just don't have a DNS. But I have literally not touched anything no ones even been in the house. Hows that happen? Any help on why only wireless works would be great, I am gonna buy a wireless adapter tomorrow for the interim but I would like to know why. Thanks.

    Read the article

  • Windows XP Blue-Screens And Reboots Instantly On Boot-Up

    - by ashes999
    My computer was running perfectly until yesterday; my internet suddenly died. Being wireless, I decided to reboot; now the computer doesn't boot. It shows the "Starting Windows" screen (safe mode loads several drivers), then it suddenly blue-screens and immediately reboots (I cannot read the blue-screen contents at all). I've tried safe-mode (with and without networking); no dice. I booted another HD with another XP install and ran scandisk on my HDs; no bad sectors, and even with auto-repair, it didn't fix the problem. Now what? What are my options to fix the broken XP install? I'm thinking: 1) Remove wireless card 2) Run XP install CD and repair installation 3) ???

    Read the article

  • VirtualBox VM settings between different CPUs (Processor/Acceleration)

    - by Level1Coder
    I have 2 PCs, 1 with a INTEL-Q9550 (YES-VT-x) and another with INTEL-E2160 (NO-VT-x) I will be using the Q9550 first to create a new VM, install XP and install stuff I'll need. Once this VM is golden, I plan on migrating this VM over to the E2160 machine. The question is, while creating/preparing this VM on the Q9550, should I disable all the following settings below to make sure the E2160 can start this VM without errors? Q9550 Default VM Settings ========================= PROCESSOR [X] Enable PAE/NX ACCELERATION [X] Enable VT-x/AMD-V [X] Enable Nested Paging

    Read the article

  • Credentials needed for BT line on Netgear router

    - by Bali C
    I have recently bought a new Netgear router to replace my current BTHomeHub as it doesn't support wireless. I did buy a WAP but figured it would be easier to use a router with wireless built in. (It's a modem/router combo). I have got as far as setting up the router on the web interface, but then it asks for a username and password to connect to the net, I can only assume this is for the phone line? I have tried some passwords I could find written down but they don't work, the internet light comes on and then when the creds fail it goes off. I have been on the homehubs web interface and been through all the settings it has to find the credentials it is using which obviously work, but no joy. Is there anything obvious I am missing, or is there a way I can retrieve my settings from my existing router? Any pointers will be very appreciated.

    Read the article

  • Problem connecting to Ubuntu Server in same local network.

    - by frbry
    I have my LAN set up as below: 192.168.2.1: ADSL Router (DHCP Range: 192.168.2.2-192.168.2.250) 192.168.2.254: Wireless Access Point 192.168.2.253: Ubuntu Server (Static IP) 192.168.2.2: My Laptop (Connects to Internet via the Wireless AP) NAT in router is active and set up to transfer requests made over port 80 to 192.168.2.253. Router's firewall is inactive. No IPs in DMZ. My friends get Apache's It Works page when they try to enter http://my_external_ip. But I get Router's configuration page instead of that. What should I check or do? Thanks.

    Read the article

  • Connect two devices with ethernet

    - by mofle
    I have a MacBook Pro and I'm going to buy a Boxee Box. I have access to wireless internet, but it's slow and out of my control. So my question is, what is the best way for both devices to get internet access, and the Boxee Box to get SMB access to the Mac, when only the Mac is connected to the wireless internet? I'm thinking an ethernet cable from the Boxee Box to my Mac, and connection sharing on my Mac. Can you explain the setup, is there any configuring.

    Read the article

  • Corrupted network from ipad

    - by lisa
    All wireless clients were kicked off the network (3 PCs & 1 iPad). Only a PC with a wired connection was still able to connect. This morning I discovered that the network had been renamed and a new password had been assigned. Via Linksys Updater I gave a new password. Strangely, in my Windows Control Panel/Network connections our old password now exists as an unsecured network, that I cannot delete! When I attempt to connect using this bastard network, I get an Apple Push error. Linksys WRT610N PCs all using Windows 7 (wired & wireless) iPad 2

    Read the article

  • Linux: Automatically switch to external monitor (VGA)

    - by peoro
    I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find. If it matters my system is like this: Archlinux Linux 2.6.36 Xorg 7.6 X server 1.9.2 Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules) When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr. Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?

    Read the article

  • PC does not recognize XBox 360 controller connected through Play & Charge Kit

    - by Mike Cole
    I wanted to hook up my wireless XBox 360 controller to my PC running windows 7. I'm trying to use the Play & Charge kit since I already had that laying around. I plugged it in and Windows recognize it and installed it. It registers in Device Manager as "Xbox 360 Wireless Controller via Play & Charge Kit". The controller also has the 1st quadrant lit. However, I can't seem to make this work with any games. I installed the "Microsoft Xbox 360 Accessories" kit from MS website, and I run the Accessories Status app and it doesn't recognize that the controller is connected. Does anybody know what I'm doing wrong out there?

    Read the article

  • Any way to stop VMWare workstation from dropping SSH connections?

    - by oljones
    I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

    Read the article

  • Why does Windows 7 x64 work faster than an x86 edition on my PC?

    - by Jasper
    Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

    Read the article

  • Unable to create installdriver instance

    - by Entity
    When trying to install a program called "AV Grabber", I get the following error message. unable to create installdriver instance Product name is: EZ Grabber Right click on the executable 7.1.79.0 I have tried installing Install Sheild 7, but have no luck trying to remove this error message. Any Ideas? Machine: Windows XP (Home Edition) User Account: Administrator Account Folder version of installshield is visible from: C:\Program Files\Common Files\InstallShield\Driver\7\Intel 32 Have tried the following command, but have not helped. "C:\Program Files\Common Files\InstallShield\Driver\7\Intel 32\IDriver.exe" -Embedding

    Read the article

  • Ubuntu 12.04 3.2 Kernel showing incorrect "cache size" in cpuinfo?

    - by Tom G
    2x Xeon E5620 . 16 Cores altogether. /proc/cpuinfo shows cache is only @ 4096kb According to intel this should have 12MB of "smart cache". Doing searched for E5620 and CPUinfo shows the correct number: cache size : 12288 KB However mine shows this: processor : 15 v endor_id : GenuineIntel cpu family : 6 model : 44 model name : Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping : 2 microcode : 0x1 cpu MHz : 2400.104 cache size : 4096 KB fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx bogomips : 4800.20 clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual Any idea on why it shows like it's missing 8MB in CPU cache? .

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >