Search Results

Search found 7593 results on 304 pages for 'mr 32'.

Page 164/304 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

  • How to install Windows 7 on Acer Aspire iDea 500?

    - by Martin R-L
    I've got a Windows 7 Ultimate 32-bit from MSDN Subscriber Downloads. The downloaded ISO boots fine from both a USB pen drive and a DVD on other computers. On the Acer it doesn't boot. The Acer iDea 500 can boot, and install, Windows XP Mediacenter from a DVD with slipstreamed SATA drives on it. Also, all kinds of Linux distros works perfectly fine on the iDea 500. I wouldn't mind using Mythbuntu instead of Windows 7 Ultimate, but it doesn't work very well.

    Read the article

  • iSCSI SAN RAID 10 Performance -- Poor Read, Good Write

    - by Litzner
    I have a EqualLogic PS4000 SAN unit with the latest firmware, setup in RAID 10. I have 3 2TB Volumes on the SAN shared out via iSCSI on 2 eth ports on two different subnets. I have moved a test server over to this newly setup SAN, and my testing is showing me a problem. I am getting dismal read performance in everything except a test with 32 queue depth (see attach image) Write performance seems to be right about where it should be. I have tried MPIO on and off, on was slightly better but not much.

    Read the article

  • How to check if a server runs in pressing mode

    - by Ice
    Hi there, Layout: i have at customer side a server (win2003 R2 SP2 standard edition 32-bit) with a sql-server 2005 and some databases. This system starts with the /3GB-Switch. The system reports 3.25 GB RAM and taskmanager reports the process of sqlserver.exe with 2758255 K as the process with the highest consumption. The OS separates RAM for applications and for itself, normaly 50:50. But here we have the /3GB-Switch aktivated and i think the part for the applications is more than 50% of RAM. Knowledge (or better not knowledge): Somebody told me that if the OS runs out of memory within his part of RAM, the server runs into pressing mode. Questions: What is this pressing mode? Is pressing mode possible at all in this szenario? What should be done to get more performance out of this sql-server, beside optimizing the database and all this stuff.

    Read the article

  • Ping from windows 7 get no reply but sets errorlevel to 0

    - by Doron
    From a Windows 7 machine, I ping an IP address of a turned-off machine. C:\>ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. What I am trying to do, is figure out if a remote machine is replying to ping. One of my tests is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0.

    Read the article

  • What could cause sudden crash of a MySQL 5.0.67 installation?

    - by Alex R
    I have an old Ubuntu 8.10 32-bit with MySQL 5.0.67. There's 5.7GB of data in it and it grows by about 100MB every day. About 3 days ago, the MySQL instance begin dying suddenly and quitely (no log entry) during the nightly mysqldump. What could be causing it? Upgrading MySQL is a long-term project for me, unless there happens to be a specific bug in 5.0.67 then I guess I'll just need to reprioritize. I'm hoping somebody might be familiar with this problem since this is a fairly popular version bundled with Ubuntu 8.10. Thanks

    Read the article

  • Sendmail Alias for Nonlocal Email Account

    - by Mark Roddy
    I admin a server which is running a number of web applications for a software dev team (source control, bug tracking, etc). The server has sendmail running solely as a transport to the departmental email server over which I have no control. We have someone who is still in the department but no longer on the dev team so I need to configure the transport agent to redirect all outgoing email (which would be coming from these applications) to the person that has taken their place. I added an entry in /etc/aliases like such: [email protected]: [email protected] But when I run /etc/init.d/sendmail newaliases I get the following error: /etc/mail/aliases: line 32: [email protected]... cannot alias non-local names So clearly I'm doing something I shouldn't. Is there a way to get aliases to work with non-local names or alternatively is their a way to accomplish my goal of redirecting outgoing mail for this user to another one? Technical Specs if the matter: Ubuntu 6.06 sendmail 8.13 (ubuntu provided package)

    Read the article

  • What free OS should I use on my VPS?

    - by earlz
    Hello, I looked a bit but didn't see any duplicate of this so my question is which free(open source) OS do you use on servers and why do you use that OS? Background I have a VPS at Linode. There is a broad range of options for which OS I can put on it including both 32 and 64bit OSs. I just use it to run my small blog and for hosting random files. It's very low traffic. I have been using 64bit Arch Linux on my VPS and though I love the OS for general usage, for a server the constant breakage is troublesome. So I'm considering trying something new and am looking for suggestions.

    Read the article

  • Intel Rapid Start Driver Reinstallation doesn't work?

    - by elegantonyx
    I recently had to reformat my entire drive and reinstall Windows 7. Something that bothers me is that when I was downloading the Intel Rapid Start driver (I have a Lenovo Ideapad Y480, and it comes standard with the Rapid Start) and tried to install it, the installer claimed that my system did not meet the requirements in order to install, when it was previously installed by the OEM. My startup times have increased from 21 seconds to log-in screen to 50 seconds. Please help... Specs: Lenovo Ideapad Y480 Intel Core i7-3610 Ivy Bridge (quad-core) Nvidia Geforce 640M LE with 2gb VRAM 8GB RAM 1TB hard drive, 32 GB SSD (OEM installed)

    Read the article

  • How can I install VLC on RHEL 6.3?

    - by holddame
    I'm having a problem installing VLC on Red hat 6.3 When I try to use yum install vlc all goes well until it shows me this in the end: Error: Package: vlc-2.0.3-6.el6.x86_64 (linuxtech-release) Requires: libminizip.so.1()(64bit) Error: Package: liblrdf-0.5.0-2.el6.x86_64 (linuxtech-release) Requires: ladspa Error: Package: libffado-2.1.0-0.8.20120325.svn2088.el6.x86_64 (linuxtech-release) Requires: libconfig++.so.8()(64bit) also I can't use yum update I'm running on a 32-bit processor and I don't know what's wrong. ok I'v installed live555 and tried again nothing really happened here is my yum whatprovides *BasicUsageEnviroment `live555-devel-0-0.34.2012.01.25.el6.x86_64 : Development files for live555.com streaming : libraries Repo : linuxtech-release Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.34.2012.01.25.el6.i686 : Development files for live555.com streaming : libraries Repo : linuxtech-release Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.27.2010.04.09.el6.rf.x86_64 : Development files for live555.com streaming : libraries Repo : rpmforge Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.27.2012.02.04.el6.rf.x86_64 : Development files for live555.com streaming : libraries Repo : rpmforge Matched from: Filename : /usr/include/BasicUsageEnvironment

    Read the article

  • Printer offline until spooler service is restarted multiple times

    - by Zian Choy
    When I try to print from my ThinkPad to a printer shared through a Windows 7 Homegroup hosted by a desktop computer, I often have to restart the Print Spooler service several times before the job will go through. In particular, this problem occurs when the desktop is in sleep mode when the print job is started and then brought out of sleep mode after the print job has been kicked off. Both computers are running Windows 7 32-bit edition with the latest patches. I have tried the following with no improvement: SNMP registry hack (see MS KB for details) Following the instructions in a blog post entitled "Sharing Printers on Vista 64-bit" Looking at Printer offline until spooler service is restarted

    Read the article

  • Removing a malware that sets up as a system driver

    - by ereOn
    Hello, I recently tried to fix up my mother's computer which has some serious malwares. One of them apparently registered itself as system driver (tjbijkoq.sys if that can help) and after running a malware suppression tool, the computer won't boot anymore, complaining about a "critical driver that is missing". I think deleting the matching entry in the registry would just solve the problem, but obviously I can't boot up the computer (even in safe mode) to fix it. Do you guys have any experience with such an issue and how to solve this ? Thank you very much. The operating system is Windows Vista 32 bits Professional

    Read the article

  • How do I open multiple windows when Outlook 2010 starts?

    - by Eric
    OS: Windows 7 64-bit App: Outlook 2010 32-bit Server: Exchange 2010 I'd like to modify Outlook's default startup behavior so that it shows both my Inbox and Calendar when I click my shortcut. I use both of them all day, and know how to just right-click the calendar and select "Open in New Window." I run my inbox on one screen and my calendar on another. I also configured my calendar to be the folder that opens by default when I start Outlook so I don't miss early appointments, but if I could somehow have BOTH open in two separate windows, that would be awesome. Is there a command-line interface or something that can accomplish this? Thanks in advance.

    Read the article

  • Q: MySQL Cluster - Data insertion in NDBCLUSTER table - error out after 5 million rows

    - by Mata
    MysqlCluster version: mysql-5.6.11 ndb-7.3.2 Insertload = 50 M dataset Datanodes = 3 LOAD DATA INFILE '/input_50m/Table_1_sorted.csv' IGNORE INTO TABLE nw_ndb FIELDS TERMINATED BY ',' LINES TERMINATED BY '\n' We recently setup a new mySQL cluster and trying to load data from a flat file. But getting error “Got temporary error 4010 'Node failure caused abort of transaction' from NDBCLUSTER" when inserting 5 million rows in a single table in MySQL Cluster. We are using "LOAD DATA INFILE" command to load the data in the table from csv file. Server (musqld, ndb nodes) has good hardware: 126 GB RAM, 32 Gb allocated to mysqld tried below settings with no effect: SET autocommit=0; SET FOREIGN_KEY_CHECKS=0; SET unique_checks=0; SET GLOBAL ndb_batch_size=8*1024*1024; SET GLOBAL ndb_cache_check_time = 1000; SET GLOBAL ndb_index_stat_cache_entries = 10000000; SET SESSION BULK_INSERT_BUFFER_SIZE=256217728; SET GLOBAL KEY_BUFFER_SIZE=256217728; Any clues?

    Read the article

  • Extremely slow startup of tomcat

    - by Henrik
    I have a tomcat 7 installation on a Solaris 10 server. My problem is that starting the server (or deploying a new war) is extremely slow. It usually take 30 - 60 minutes. The war application is a medium sized grails application so there are quite a a lot of files. The server is running other server applications as well but from my basic skills I don't see this as a problem. Can anyone give me some tips on how to analyse this? Settings in Tomcat, java, server, disc access or something else? I use these parameters to tomcat: CATALINA_OPTS="-Dcom.sun.management.jmxremote=true -Djava.awt.headless=true -Dfile.encoding=UTF-8 -server -Xms1536m -Xmx1536m -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=512m -XX:MaxPermSize=512m -XX:+DisableExplicitGC" And I use a 32 bit java 1.6.

    Read the article

  • How do I kill a process that keeps respawning?

    - by terabytest
    I got infected by a virus. It looks like I removed it, but it somehow injected a few more processes (I can see them in the task manager) that respawn when I kill them (somehow). Is there a way to destroy those process to stop them from respawning, or in the case something else is respawning them, to kill that "something"? I really don't want to format my pc for this. The data in it is very important for me (personal value) so I'd really want to know a way to do this without reinstalling my OS. I'm on Windows Vista 32 bits.

    Read the article

  • Trouble with external monitor under Windows 7 on MacBook Pro Boot Camp

    - by Colm
    I'm running Windows 7 32-bit on a mid-2010 15" MacBook Pro Intel Core i5 under Boot Camp. I've had trouble getting it to work with my second display and searching Google for an appropriate answer has failed me. I'm on the latest version of Boot Camp - 3.2 - and have updated the drivers for the NVIDIA GeForce GT 330M. The monitor is connected via a VGA cable, and is a Dell ST2410. The monitor is recognised by Windows, which knows it's a Dell and its resolution. The desktop should be extended onto the second monitor - however nothing is showing. It remains black, though it doesn't show a lack of signal coming through which I would have expected. Any ideas what's wrong?

    Read the article

  • How to check use of userva boot option on Win 2K3 server

    - by Tim Sylvester
    I have some 32-bit Win2K3 servers running an application that fails now and then apparently due to heap fragmentation. (Process virtual bytes grows, private bytes does not) I do not have access to the source code or build process of this application. I have modified the boot.ini file on one of these servers to include /userva=2560, half way between the normal mode of operation and the /3GB option. Normally it takes weeks to reach the point of failure, but I'd like to see right away whether this has actually had any effect. As I understand it, this option limits the kernel to the remaining address space (1536MB instead of 2048), but does not necessarily give an application the extra address space, depending on the flags in the application's PE header. How can I determine whether the O/S is allowing a particular application, running in production, to access address space above 2GB? Additionally, what's the best way to monitor the system to ensure that the kernel is not starved for address space, and more generally how should I go about finding the optimal value for this setting?

    Read the article

  • Page allocation failures on iSCSI storage

    - by Dave
    We have a CentOS 6.3 iscsi server (16GB RAM) running on Infiniband bus (ipoib). When the load is high I can see multiple errors: Sep 3 23:22:20 stor4 kernel: tgtd: page allocation failure. order:2, mode:0x20 Sep 3 23:22:20 stor4 kernel: Pid: 3637, comm: tgtd Not tainted 2.6.32 #1 Sep 3 23:22:20 stor4 kernel: Call Trace: Sep 3 23:22:20 stor4 kernel: [] ? __alloc_pages_nodemask+0x77f/0x940 Sep 3 23:22:20 stor4 kernel: [] ? kmem_getpages+0x62/0x170 Sep 3 23:22:20 stor4 kernel: [] ? fallback_alloc+0x1ba/0x270 Sep 3 23:22:20 stor4 kernel: [] ? cache_grow+0x2cf/0x320 Sep 3 23:22:20 stor4 kernel: [] ? ____cache_alloc_node+0x99/0x160 Sep 3 23:22:20 stor4 kernel: [] ? pskb_expand_head+0x64/0x270 Sep 3 23:22:20 stor4 kernel: [] ? __kmalloc+0x189/0x220 Sep 3 23:22:20 stor4 kernel: [] ? pskb_expand_head+0x64/0x270 Sep 3 23:22:20 stor4 kernel: [] ? __pskb_pull_tail+0x2aa/0x360 Sep 3 23:22:20 stor4 kernel: [] ? tcp_init_tso_segs+0x37/0x50 Sep 3 23:22:20 stor4 kernel: [] ? dev_queue_xmit+0x4bb/0x6f0 Sep 3 23:22:20 stor4 kernel: [] ? neigh_connected_output+0xbd/0x100 Sep 3 23:22:20 stor4 kernel: [] ? ip_finish_output+0x237/0x310 Sep 3 23:22:20 stor4 kernel: [] ? ip_output+0xb8/0xc0 Sep 3 23:22:20 stor4 kernel: [] ? __ip_local_out+0x9f/0xb0 Sep 3 23:22:20 stor4 kernel: [] ? ip_local_out+0x25/0x30 Sep 3 23:22:20 stor4 kernel: [] ? ip_queue_xmit+0x190/0x420 Sep 3 23:22:20 stor4 kernel: [] ? sock_aio_write+0x167/0x180 Sep 3 23:22:20 stor4 kernel: [] ? tcp_transmit_skb+0x3fe/0x7b0 Sep 3 23:22:20 stor4 kernel: [] ? tcp_write_xmit+0x1fb/0xa20 Sep 3 23:22:20 stor4 kernel: [] ? __tcp_push_pending_frames+0x30/0xe0 Sep 3 23:22:20 stor4 kernel: [] ? tcp_push_pending_frames+0x33/0x40 Sep 3 23:22:20 stor4 kernel: [] ? do_tcp_setsockopt+0x3d6/0x480 Sep 3 23:22:20 stor4 kernel: [] ? tcp_setsockopt+0x2a/0x30 Sep 3 23:22:20 stor4 kernel: [] ? sock_common_setsockopt+0x14/0x20 Sep 3 23:22:20 stor4 kernel: [] ? sys_setsockopt+0x7f/0xe0 Sep 3 23:22:20 stor4 kernel: [] ? system_call_fastpath+0x16/0x1b Sep 3 23:22:20 stor4 kernel: Mem-Info: Sep 3 23:22:20 stor4 kernel: Node 0 DMA per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA32 per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 186, btch: 31 usd: 183 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 186, btch: 31 usd: 23 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 186, btch: 31 usd: 183 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 186, btch: 31 usd: 181 Sep 3 23:22:20 stor4 kernel: Node 0 Normal per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 186, btch: 31 usd: 171 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 186, btch: 31 usd: 29 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 186, btch: 31 usd: 32 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 186, btch: 31 usd: 32 Sep 3 23:22:20 stor4 kernel: active_anon:1875 inactive_anon:2473 isolated_anon:0 Sep 3 23:22:20 stor4 kernel: active_file:1243637 inactive_file:2505055 isolated_file:0 Sep 3 23:22:20 stor4 kernel: unevictable:0 dirty:268338 writeback:0 unstable:0 Sep 3 23:22:20 stor4 kernel: free:86050 slab_reclaimable:132377 slab_unreclaimable:23744 Sep 3 23:22:20 stor4 kernel: mapped:1293 shmem:222 pagetables:720 bounce:0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA free:15732kB min:124kB low:152kB high:184kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15332kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 2172 16060 16060 Sep 3 23:22:20 stor4 kernel: Node 0 DMA32 free:107544kB min:18268kB low:22832kB high:27400kB active_anon:468kB inactive_anon:2364kB active_file:566208kB inactive_file:976112kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:2224900kB mlocked:0kB dirty:96816kB writeback:0kB mapped:908kB shmem:12kB slab_reclaimable:176940kB slab_unreclaimable:968kB kernel_stack:64kB pagetables:192kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 0 13887 13887 Sep 3 23:22:20 stor4 kernel: Node 0 Normal free:220924kB min:116772kB low:145964kB high:175156kB active_anon:7032kB inactive_anon:7528kB active_file:4408340kB inactive_file:9044108kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:14220800kB mlocked:0kB dirty:976536kB writeback:0kB mapped:4264kB shmem:876kB slab_reclaimable:352568kB slab_unreclaimable:94008kB kernel_stack:2048kB pagetables:2688kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 0 0 0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA: 1*4kB 0*8kB 1*16kB 1*32kB 1*64kB 0*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15732kB Sep 3 23:22:20 stor4 kernel: Node 0 DMA32: 16305*4kB 4381*8kB 353*16kB 8*32kB 1*64kB 1*128kB 0*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 107900kB Sep 3 23:22:20 stor4 kernel: Node 0 Normal: 14548*4kB 14808*8kB 2420*16kB 31*32kB 5*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 1*4096kB = 220784kB Sep 3 23:22:20 stor4 kernel: 3748822 total pagecache pages Sep 3 23:22:20 stor4 kernel: 0 pages in swap cache Sep 3 23:22:20 stor4 kernel: Swap cache stats: add 0, delete 0, find 0/0 Sep 3 23:22:20 stor4 kernel: Free swap = 975864kB Sep 3 23:22:20 stor4 kernel: Total swap = 975864kB Sep 3 23:22:20 stor4 kernel: 4194303 pages RAM Sep 3 23:22:20 stor4 kernel: 126915 pages reserved Sep 3 23:22:20 stor4 kernel: 3753534 pages shared Sep 3 23:22:20 stor4 kernel: 213500 pages non-shared TCP stack and VM config: net.core.rmem_max = 83886080 net.core.wmem_max = 83886080 net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.ipv4.tcp_rmem = 40960 1048560 4194304 net.ipv4.tcp_wmem = 40960 196608 4194304 net.ipv4.tcp_mem = 16388608 16388608 16388608 vm.min_free_kbytes=135168 Additional tweaks: /sbin/blockdev --setra 16384 /dev/sdb echo 2048 /sys/block/sdb/queue/nr_requests Where might the problem be? Thank you.

    Read the article

  • Installing MFC (vs2005) application on Windows 2008 R2 64

    - by olich
    I've build an application that runs on Windows 2003, it is an old style MFC application. Today I need to install the application on a Windows 2008 R2 64 system. I have failures during installation and the application does not run. The application is build with VisualStudio2005, and uses COM objects. The MSI register the objects but it fails with the error code : HRESULT -2147010895. Any idea why the COM registration failed? I've tried to install the "Microsoft Visual C++ 2005 Redistributable Package (x86)" but it doesn't help. I've tried to register the COM objects with the regsvr32 after the installation but sadly it doesn't help. I've tries to install the application on Windows 2008 R2 32, and it works perfectly. I am quite new with 64 systems, so any help will be appreciated. tia olich

    Read the article

  • Virtual MS Sql Server not consuming enough CPU

    - by rocketman
    We have a Win2008 server 32 bit running as a virtual machine under ESX server. It has 6 CPU cores of 2Gz each and 4GB ram. It's running MS Sql Server 2008 R2 only. Problem: The server is heavily loaded and responds slowly. From windows taskmanagers point of view, it really looks overloaded, CPU wise. However, our external "cloud manager" says it's only using 2.5GHz worth of CPU-cycles in the cluster. I/O times looks "good". We have already tried to set the SQL servers number of working threads from 0(auto) to 256, to no effect. How to tune the VM host, guest or SQL to use all of it's alotted resources? Does it sound possible att all?

    Read the article

  • How to limit my CPU power programmatically on Windows 7?

    - by Ivan
    Whenever I run a CPU-heavy activity (like compressing a big set of files into an archive for example) my CPU switches to its full throttle (maximum frequency) and shuts down of overheat in less than a minute. Instead, I would like it to keep slowed-down slightly to do the task a bit slower but be able to reach the finish. At the same time I don't want to dim my screen brightness or adjust anything else what standard Windows power-saving system does. So how do I actually set a cap to limit my CPU power? The CPU is Core 2 Duo T7250, the OS is Windows 7 32-bit, there seem to be no BIOS settings or jumpers available to configure the frequencies.

    Read the article

  • Can't reinstall Office 2010

    - by Sniffer
    I had Office 2010 Professional Plus installed on my Windows 7 (32 bit machine), then I decided to remove it and install the 2013 version. I went to Programs and Features and removed the software as always, everything went successfully and it asked me to reboot the machine in order to complete the un-installation process, and when I clicked reboot a message suddenly appears telling me that an error occurred during un-installation and the system restarts instantly before I get a chance to see the error message. After that I tried to re-install Office 2010 but after the installer seems to have finished, it tells me that the installation failed without an explanations ? I have taken a look at the event viewer and there is some error saying the office protection platform service failed to start, could this have anything to do with the problem? What could be the cause, how can I fix this ?

    Read the article

  • emails getting sent with wrong "from" address

    - by Errol Gongson
    I have a postfix/dovecot system setup on Ubuntu 10.04, and it sends/receives emails fine, but when I send emails they are all from [email protected]. For example, I have a user called "info" and when I try to send an email using mutt from this Mailbox "/home/vmail/mydomain.com/info/Maildir" the email will send find but it will be from "[email protected]" and not "[email protected]". I have 3 mailboxes (/home/vmail/mydomain.com/root/Maildir, /home/vmail/mydomain.com/root/postmaster, and /home/vmail/mydomain.com/root/info) and they all send and receive emails. I am new to postfix and dovecot... can someone who knows what they are doing help me out on this one?? 30 myhostname = mail.mydomain.com 31 alias_maps = hash:/etc/aliases 32 alias_database = hash:/etc/aliases 33 myorigin = mydomain.com #have tried setting myorigin = mail.mydomain.com and still same problem 34 mydestination = mail.mydomain.com, localhost, localhost.localdomain 35 relayhost = 36 mynetworks = 127.0.0.0/8 37 mailbox_size_limit = 0 38 recipient_delimiter = + 39 inet_interfaces = all 40 html_directory = /usr/share/doc/postfix/html 41 message_size_limit = 30720000 42 virtual_alias_domains = This is from the aliases file postmaster: root root: [email protected]

    Read the article

  • how do you uninstall an xampp installation that refuses to uninstall?

    - by Rick
    I downloaded xampp 1.7.3 (32) on windows 7 (64) in the programs(86) folder. both MySql and Apache refuse to run, they start and then instantly turn of. All ports are free. So I decide to uninstall however, when i run the uninstaller I receive the following error "Input Error: Can not find script file "C:\Program Files (x86)\xampp\uninst.temp\xampp_uninstall.vbs" XAMPP uninstall not OK Why is there spaces in the above line and does this matter "C:\Program Files (x86)" ? Can somebody please help me to understand the problem & uninstall xampp (or get it to work). It does not show in the control panel so I am stuck. All help is greatly appreciated. Thank you.

    Read the article

  • Are there ways to write php/python code to run as hooks in the Apache Request Processing pipeline?

    - by SB
    Does anybody know of any modules that provide the functionality to write python or PHP code to run as hooks in the Apache request processing pipeline? For instance, mod_perl lets me write PerlModules, which can contain handlers for the header parsing phase, content delivery, and even filters. I would like to do something similar in other scripting languages. I could write it in C, but the goal is to deploy a module that would work across a number of systems. If I deliver it as binary in C, then it would require 64/32-bit versions and some other issues. With perl, I can just require certain modules installed and mod_perl2.

    Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >