Search Results

Search found 4775 results on 191 pages for 'permissions'.

Page 165/191 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• VMM 2012 Adding Hosts in Trusted Forest

  - by Steve Evans

  I have two forests with a two way trust between them. VMM 2012 sits in ForestA and I can discover hosts in ForestA with no issue. When I try to discover hosts in ForestB I hit one of two issues: If I go through the GUI or use Powershell just like I normally do I get the following error on the job: Error (10407) Virtual Machine Manager could not query Active Directory Domain Services. Recommended Action Verify that the domain name and the credentials, if provided, are correct and then try the operation again. It doesn't matter which account I use. I've tried accounts from both forests, with Admin/Domain Admin permissions all over the place, etc Going through the GUI (can't find the switch in Powershell to duplicate this), I check the box "Skip AD Verification" and it causes the GUI to crash during discovery. I found an article (http://technet.microsoft.com/en-us/library/gg610641.aspx) that describes how to add a host in a disjoint namespace (even though that doesn't apply to me) and it says that VMM creates an SPN if one does not exist. So I verified that the correct SPN's exist in ForestB, that did not help the issue. I have a case open with PSS but they are stuck. I have VMM traces if anyone would like to see them. Any suggestions or ideas?

  Read the article

• Exchange 2003: recover mailbox when migrated to 2007

  - by lyngsie

  We have migrated almost all of our mailboxes from Exchange 2003 to 2007 so both are still up and co-existing in our domain. One mailbox is missing some mails, and I tried to recover from an Exchange 2003 backup using ExMerge as usual, but it throws an error: Error opening message store (MSEMS). Verify that the Microsoft Exchange Information Store service is running and that you have the correct permissions to log on. (0x8004011d) This should be normal when a mailbox has been migrated to 2007 and you try to recover a 2003 backup as stated here: http://www.petri.co.il/restoring-exchange-2003-mailboxes-exchange-2007-exmerge.htm We then tried the solution given in the article (copying the value "homemdb" for the user and pasting this in "msExchOrigMDB" for the Recovery Storage Group object in adsiedit). The error unfortuntely persists. So my question is, how can I extract a .pst from a mailbox in the recovery storage group when both Exchange 2003 and 2007 are running? I assume this is why the solution in the article didn't work. If no solution is possible using regular tools (exmerge, eseutil, etc.) which third-party tool should we choose - preferably the cheapest as we only need this one mailbox recovered.

  Read the article

• Strange ssh key issue

  - by user55714

  Scenario 1. I am doing this from /home/deploy directory I am trying to set up ssh with github for capistrano deployment. this has been an absolute nightmare. when I do ssh [email protected] as the deploy account I get Permission denied (publickey). so may be the key is not being found, so If I do a ssh-add /home/deploy/.ssh/id_rsa Could not open a connection to your authentication agent. (i did verify that the ssh-agent was running) If I do exec ssh-agent bash and then repeat the ssh-add then the key does get added and I can ssh into github. Now I exit from the ssh connection to my server and ssh back in and I can't ssh into github anymore! Scenario 2 if I login to my remote server and then cd into my .ssh directory and ssh into github then it all works fine I guess there is a problem with locating the key and for some reason the agent isn't funcitoning correctly. Any ideas? Her is a pastie with more details..my .bashrc, permissions etc. http://pastie.org/pastes/1190557/

  Read the article

• Storing secure keys on Ubuntu web server

  - by Sencha

  I'm running Ubuntu 12.04 Precise with a DUNG (Django, Unix, Nginx & Gunicorn) environment and my app (as well as various config files) is stored in a python virtual environment inside /srv, which the www-data user has access to. The nginx & gunicorn processes are all run as www-data. My web app requires secure credentials which I am storing in an environment.sh file. This file contains various exports and is run using source before the gunicorn processes execute. My concern is the location of the environment.sh file and it's permissions. Will it be okay storing this file inside the /srv folder where the www-data has access to it? Or should it be stored and owned by root somewhere else such as /var/myapp/environment.sh? Also, regarding the www-data user, if any of my web processes (which are run as www-data) are compromised and someone gains access to them, does that mean that the user could potentially read any file on the system, even if they can't write? Including my secure keys?

  Read the article

• Windows service fails to start with local user until password is entered again in logon tab

  - by Nick

  Basically we have a service where we use a local account as its logon. it has all the proper permissions, and everything is working fine, service starts and runs and all is good. Then one day, after rebooting, the service fails to start. Logs show incorrect password. Our technicians resolve the issue by simply retyping the password into the "Log On" tab from the services.msc. Unfortunately we have not been able to root cause. I suspect that the password that is stored for the service is lost somehow. Does anyone know where the password hash might be stored so we can check it? The only activities that seem to be possibly related are patching with Microsoft security patches, but we have multiple servers running the same service, and we have never seen more than one at a time, and its usually a different one each time when this occurrs. I believe this to be the same issue as this: Windows service fails to start with custom user until started once with local user But i was unable to add comments, and its really old.

  Read the article

• How do I prevent my ASP .NET site from continually prompting for user credentials?

  - by gilles27

  I'm trying to get an ASP .NET website up and running on IIS6. The site will run in its own application pool, and uses Windows authentication, with anonymous access turned off. When I run the app pool under NETWORK SERVICE, everything works fine. However we need the app pool to run under a different account, because this account needs some extra privileges (we are printing Word documents). This new account is a member of the local users group, and the IIS_WPG group. It has also been granted the "Log on as a service right". When I browse to the site I am prompted for credentials, not once, but several times. When the page finally loads it looks wrong because the style sheets have not been applied. My suspicion is that I am being prompted once for each file (e.g. all the images, styles and script files) the browser requests, and that for some reason the website is unable to validate those credentials in order to serve the files back. If I allow anonymous access the page loads fine - we don't want to allow it but I mention it in case it offers any further clues. My theory is that perhaps the account the app pool runs under needs permissions to validate domain credentials? If that is so, how do I enable this?

  Read the article

• IIS7 can't read web.config on shared Mac filesystem

  - by RobG

  I'm running a VirtualBox virtualized Windows 2008 Server on my Mac, just finished setting it up today. On it, I have SQL Server 2008, IIS and ColdFusion 9. I want to serve websites from my Mac filesystem (for development purposes). So I created a new website in IIS and pointed it at the appropriate path using a UNC path: \vboxsvr\rob\Sites\testsite, which contains the ColdFusion code and a web.config file. When I attempt to modify the file at all, or view the site in a web browser, I get an error: HTTP 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. I did some Googling, and found several similar problems, but nothing exactly like I have. The closest one seemed to indicate permissions. So I recreated the site and set it up to allow the Administrator (in Windows) to access the stuff. That didn't help. I can read/modify the files just fine from within Windows, but IIS itself can't seem to do it. What do I need to do to fix this? Thanks!

  Read the article

• Strange mysql problem moving website from Ubuntu server to Mac server

  - by evan

  I'm moving a website (php/mysql) from an Ubuntu server to a OSX 10.6 server. I've set up apache to run php scripts and setup the newest version of mysql on the mac. I just copied all of the php files and dumped/imported all of the mysql databases (including the mysql users database). When I visit the page being served on the Mac the page is able to connect to the database, but not query. Specifically this function mysql_error() is returning this error message NO SUCH FILE OR DIRECTORY The reason it's strange is that I'm able to change the php connection strings for mysql on the Ubuntu server so that it points to the Mac server and the page works correctly (so it seems mysql is correctly set up on the mac and definitely contains all of the users and tables it should). Thinking it was something to do with file permissions on the mac, I've changed all of the files 755 and it hasn't helped. Any ideas? Thanks!! UPDATE: I've found this error which I'm relatively certain is related to this problem in /var/log/apache2/error_log PHP Warning: mysql_query(): A link to the server could not be established

  Read the article

• Debian 6: setting up FTP just for website editing

  - by David Oliver

  I have a VPS using Debian 6.0. Currently, SSH is set to not accept password logins, and only key-based ones. A person who needs to work on one particular website (a vhost) wishes to use FTP. He doesn't need/want SSH. How can I set up FTP access for him, enabling him to have write permissions for all files in the relevant directory, and only the relevant directory? The directory is /srv/www/domainname.com/public_html Currently, all directories and files in that directory belong to www-data:www-data and are 644/755. I've installed vsftpd and have been reading some guides, but they all seem to deal with allowing multiple users to have their own user-named directories which isn't what I'm after. I can't seem to work out how to simply define one FTP user with a password that has access to one directory of my choosing. This is my first experience of setting up an FTP server. Thanks. Edit: have also found this - maybe I should be using ProFTPd, or can vsftpd also do what I want?

  Read the article

• Google Drive terminates without error on startup

  - by Iszi

  I've used Google Drive for awhile now, but it won't start up after installing on my latest system re-build. I'm still using the same OS, hardware, and basic software load (antivirus, firewall, etc.) that I have for years during which I had not previously had problems with Drive. OS: Windows 7 Ultimate x64 Google Drive Version: 1.12.5329.1887 Now, whenever I try to run Google Drive, it just spawns two instances of the executable which die shortly after. No error messages are posted to the desktop, and nothing indicating any problem is written to the Event Log. After some research, I've yet to find anyone having the same problem who's found an answer. I did find out how to run Google Drive in diagnostic mode, using the --vv parameter at the command line. After that, I opened up the sync log and got this: 2013-10-31 17:11:24,039 INFO pid=3664 1892:MainThread logging:1600 OS: Windows/6.1.7601-SP1 2013-10-31 17:11:24,039 INFO pid=3664 1892:MainThread logging:1600 Google Drive (build 1.12.5329.1887) 2013-10-31 17:11:24,039 DEBUG pid=3664 1892:MainThread logging:1608 DEBUGGING DUMP is ON. 2013-10-31 17:11:24,051 ERROR pid=3664 1892:MainThread logging:1575 ERROR, UNEXPECTED EXCEPTION 2013-10-31 17:11:24,051 ERROR pid=3664 1892:MainThread logging:1575 [Error 5] Access is denied Traceback (most recent call last): File "<string>", line 232, in Main File "<string>", line 118, in RegisterCustomFileTypes File "P:\p\agents\hpal4.eem\recipes\353983091\base\b\drb\googleclient\apps\webdrive_sync\windows\build\pyi.win32\main\outPYZ1.pyz/windows.registry", line 62, in GetValue WindowsError: [Error 5] Access is denied 2013-10-31 17:11:24,052 INFO pid=3664 1892:MainThread logging:1600 Crash reporting disabled. Ignoring report. 2013-10-31 17:11:24,052 INFO pid=3664 1892:MainThread logging:1600 Exiting with error code: 0 I'm running on an account with Administrator-level permissions, and have even tried using "Run As Administrator" on the EXE. I'm not sure why it's looking for a P:\ drive, as no such volume has ever been mounted on this system. What should I do to try to further troubleshoot, and resolve, this issue?

  Read the article

• Replacing HD in an MacOS 10.6.8 server caused all shares to fail

  - by Cheesus

  I'm hoping someone might have a helpful suggestion about this problem. We have 2 MacOSX servers available for file sharing. (quad Xeons - 2GB RAM, both 10.6.8), No.1 is an Open Directory Master with 50+ user accounts, No.2 has only 2 local accounts (/local/Default) and looks at the OD Master for all user accounts (/LDAPv3/10.x.x.20/) Both servers have 3 internal HD's, The boot volume with only Server OS and minimal Apps. A 'DataShare' HD (500GB) and a backup drive (500GB). After upgrading the DataShare HD in Server No.2 from a small internal HD (500GB) to larger capacity (2TB) drive, users are unable to connect to shares on Server No.2. Users get an error "There are no shares available or you are not allowed to access them on the server" The process I followed was to use Carbon Copy Cloner to create an exact copy of the original data drive (keeps all ownership data, UID, permissions, last edit date and time). Everything booted up ok, no indication there was any issues. (Paths to the sharepoint look good) Notes during troubleshooting - Server1 is operating perfectly, all users can access shares and authenticate etc. - I've checked the SACL (Server Access Control List) settings is ok. - On Server2 in the Server Admin' app, I can see all the shares listed ok. The paths seem valid, I can disable / reenable the shares, no errors. - On Server2 'workgroup manager' lists all the accounts from the OD Master in the LDAP dir view. All seems fine from here. Basically everything looks normal but no file shares on Server2 can be accessed from regular users.

  Read the article

• CentOS: Init scripts failing to start for some unknown reason

  - by user705142

  I'm running CentOS 6.2 - I've just migrated some applications over to a failover server, and copied their init scripts into /etc/init.d. I've made them executable, added them to chkconfig, with chkconfig -add, set their levels, made sure they're residing in /etc/rc.d/ - made sure I can execute them from rc2.d etc. The permissions are the same on both servers. They're also running in the same order as on the primary server Yet on reboot they don't start. Any ideas? The offenders are these: jetty 0:off 1:off 2:on 3:on 4:on 5:on 6:off smart 0:off 1:off 2:on 3:on 4:on 5:on 6:off /etc/init.d: -rwxr-xr-x. 1 root root 14456 Mar 13 20:21 jetty -rwxrwxrwx. 1 root root 5829 Mar 29 09:58 smart /etc/rc.d/rc3.d lrwxrwxrwx. 1 root root 15 Mar 29 19:21 S99jetty -> ../init.d/jetty lrwxrwxrwx. 1 root root 11 Mar 26 17:12 S99local -> ../rc.local lrwxrwxrwx. 1 root root 15 Mar 29 19:21 S99smart -> ../init.d/smart I've checked, and I'm in run level 3. I've checked their logs, and there's no indication that that they've been started. I can start them manually easily - and other services are starting normally. I'm completely out of ideas really.

  Read the article

• Directories shown as files, when sharing a mounted cifs drive

  - by Johan Sigfred Abildskov

  I have an issue where a directory is shown as a file when accessing a samba share ( on Ubuntu 12.10 ) from a Windows machine. The output from ls -ll in the folder on the linuxbox is as follows: chubby@chubby:/media/blackhole/_Arkiv$ ls -ll total 0 drwxrwxrwx 0 jv users 0 Jun 18 2012 _20 drwxrwxrwx 0 jv users 0 Apr 17 2012 _2006 drwxrwxrwx 0 jv users 0 Apr 17 2012 _2007 drwxrwxrwx 0 jv users 0 May 12 2011 _2008 drwxrwxrwx 0 jv users 0 Feb 19 09:53 _2009 drwxrwxrwx 0 jv users 0 Dec 20 2011 _2010 drwxrwxrwx 0 jv users 0 May 8 2012 _2011 drwxrwxrwx 0 jv users 0 Mar 5 11:37 _2012 drwxrwxrwx 0 jv users 0 Feb 28 10:09 _2013 drwxrwxrwx 0 jv users 0 Feb 28 11:18 _Mailarkiv drwxrwxrwx 0 jv users 0 Jan 3 2011 _Praktikanter The entry in /etc/fstab is: # Mounting blackhole //192.168.0.50/kunder/ /media/blackhole cifs uid=jv,gid=users,credentials=/home/chubby/.smbcredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0 When I access the share directly from the NAS on my Windows box, there are no issues. The version of Samba is 3.6.6, but I couldn't find anything in the changelogs that seem relevant. I've tried mounting it in different locations with different permissions, users and groups but I have not made any progress Due to my low reputation on serverfault ( mostly stackoverflow user ) I'm unable to post a screenshot that shows that the directories are shown as files. If I type the full path in explorer, the directory listing works excellently, except for any subdirectories that are then shown as files. Any attack vector for this issue would be greatly appreciated. Please let me know if I have provided insufficient details. Edit: The same share when accessed from a OS X, works perfectly listing the directories as directories. Best Regards!

  Read the article

• Spotlight has stopped indexing/returning anything in /Applications

  - by pra

  After a recent kernel panic & restart, Spotlight no longer seems to know anything about the files under my /Applications folder. I used to launch Safari.app, Opera.app, Textedit.app, etc via Spotlight as a matter of routine. Now, I get "No results found" for all of them (except Textedit.app, which launches a demo text editor from a Qt installation). The programs are still there & still launch directly from Finder. I've already run disk utility & verified the disk, no issues. I repaired disk permissions, which made several changes, but to no effect. Is there anything else I can do, short of re-installing MacOS? Update: I already verified that "Applications" was still checked in my Spotlight preferences. It was still returning applications located elsewhere (the Qt textedit sample app), so that shouldn't have been the issue. A few hours later it resolved itself; I guess there's a background process running on some interval.

  Read the article

• How to correctly deploy Adobe Reader 9.1

  - by Ben Gillam

  Hi I have recently tried to deploy Adobe Reader 9.1 onto our network here. (SBS 2003 server and XP Workstations) I followed the instructions for the extraction of the installer and .msi and then creating a .mst transform file to set custom options. (Suppress EULA, dont create desktop icon etc) I then added the package to my deployment GPO applied the relevant .mst file and preceded to deploy accross the network. The software package is computer assigned to be installed prior to logon, to avoid user permissions issues. The package deploys correctly to computers and will run perfectly fine if you run from a shortcut, however when trying to view a pdf from within a web browser it fails with the following message. "The adobe acrobat/reader that is running can not be used to view PDF files in a web browser. Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again" I have found many pages on google refering to this problem, but none appear to be in relation the problems I have found. http :// kb2.adobe.com/cps/405/kb405461.html These fixes recommend correcting a registry entry (which i should mention is missing after the deployed installation. However this does not work. Switching off display in a browser - Seems to defeat the object of fixing the problem Removing old versions - There arent any. Trying with a different user - This affects all users of all privalige levels on all computers. On my workstation I uninstalled Acrobat Reader 9.1 then reinstalled manually using the same installation source files and it works fine. has anyone sucsessfully deployed AR9.1 on their domain and if so how? For the time being I have downloaded the older 8.1.3 release and deployed this in the same way which works fine, but would like to be using the up to date version. Thanks

  Read the article

• OS X (10.6) Apache Sudden Death, Nginx not working either...

  - by Jesse Stuart

  Hi, I turned on my computer today and apache wasn't working. This is weird as its been working for the last 6 months without issue. The only thing I did which may of caused a problem, is I uninstalled a bunch of gems. This shouldn't be the issue though as apache doesn't rely on gems. I decided to give nginx a try to see if it would work and have the exact same issue. The symtoms are: I go to http://localhost and get the browsers default 404 page (not rendered by apache/nginx) No error is found anywhere (I checked all logs) Apache is rinning (also tried with Nginx) How can I debug this to find the root of the problem? I can't think of why this would be happening. I've tried repairing permissions in case this was the issue, apparently it wasn't. Everything was working the other day, and nothing changed in the apache config. Update: Here is the output of telnet localhost 80 $ telnet localhost 80 Trying ::1... telnet: connect to address ::1: Connection refused Trying fe80::1... telnet: connect to address fe80::1: Connection refused Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host

  Read the article

• Why am I not able to create a backup plan for TFS?

  - by noocyte

  I am trying to create a backup plan using the TFS Power Tools but I keep running into this error message: I have checked that the account has Full Control on the share, I can edit, create and delete files there. From the log: [Info @07:15:00.403] Starting creating backup test validation [Error @07:15:00.700] Microsoft.SqlServer.Management.Smo.FailedOperationException: Backup failed for Server 'WMSI003714N\SqlExpress'. ---> Microsoft.SqlServer.Management.Common.ExecutionFailureException: An exception occurred while executing a Transact-SQL statement or batch. ---> System.Data.SqlClient.SqlException: Cannot open backup device '\\wmsi003714n\sql dump\Tfs_Configuration_20100910091500.bak'. Operating system error 5(failed to retrieve text for this error. Reason: 1815). BACKUP DATABASE is terminating abnormally. at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) --- End of inner exception stack trace --- at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries) at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv) --- End of inner exception stack trace --- at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv) at Microsoft.TeamFoundation.PowerTools.Admin.Helpers.BackupFactory.TestBackupCreation(String path) [Error @07:15:00.731] !Verify Error!: Account GROUPINFRA\SA-NO-TeamService failed to create backups using path \\wmsi003714n\sql dump [Info @07:15:00.731] "Verify: Grant Backup Plan Permissions\Root\VerifyDummyBackupCreation(VerifyTestBackupCreatedSuccessfully): Exiting Verification with state Completed and result Error" Any ideas?

  Read the article

• IIS7.5 - about app pool ID's and folder read/write access

  - by merk

  I did some searching and it looks like for each app pool, there should be an account created called IIS APPPOOL\AppPoolName - however i can see no such account when i try to modify the permissions on a folder to give that app write access. The closest I have found is the IIS_IUSRS group. Now, if i go into that group and look at the members, i see several IIS APPPOOL\PoolName members. But where are these members coming from? Why don't they show up under the users? And why can't i add a specific one to a folder? It doesn't make sense to me to add the IIS_IUSRS group to a folder since they gives every site access to the folder. To be more specific, I'm setting up wordpress and it unfortunately wants write access to the root folder. So i want to restrict it as much a possible. I was trying to figure out how to set it so that the WP root folder has write access only for the ID that the blog's app pool is running under. When i drill down into the IIS_IUSRS group, i do not see the app pool for the blog listed there. The settings for the blog's app pool are: No managed code, Classic, ApplicationPoolIdentity, and it's named 'blog' So any explanations regarding these users that are created for the app pools, and why the blog doesn't seem to belong to the iusrs group? thanks

  Read the article

• ownership of hard drive recoveery of files Windows 7

  - by Jeff

  Here is the issue. I have an old laptop that died that was running xp. I now have a win 7 laptop. I need to get the files off the old drive. Win 7 will not let me take ownership of the drive. I can runn the comand prompt in regular mode and do a dir on the drive that shows up as Q: drive in regular mode. I gives me the volume as c and the serial number. I can not take ownership in regular mode with the comand prompt or other means. Microsoft site says use safe mode with networking. So I go to safe mode the drive shows up as G: in safe mode. I use the comand prompt Takeown /f G: and get the device is not ready error. I am at a loss. All I want is to retrieve my files from this drive. Any ideas or sugestions. I don't see how you can dir and get some info in one mode and not acces it in another. I have to get ownership and permissions fixed to get in the drive to get my files. Thanks in advance. I might add that I am using a usb3.0 to ide/sata cable adapter. Software came with the device but I can't make heads or tails out of the manual to know if any of the software can help me. The soft ware is PCClone Ex lite, and Clone Drive Soft ware

  Read the article

• CentOS 5.8 - Can't login to tty1 as root after updates?

  - by slashp

  I've ran a yum update on my CentOS 5.8 box and now I am unable to log into the console as root. Basically what happens is I receive the login prompt, enter the correct username and password, and am immediately spit back to the login prompt. If I enter an incorrect password, I am told the password is incorrect, therefore I know that I am using the proper credentials. The only log I can seem to find of what's going on is /var/log/secure which simply contains: 15:33:41 centosbox login: pam_unix(login:session): session opened for user root by (uid=0) 15:33:41 centosbox login: ROOT LOGIN ON tty1 15:33:42 centosbox login: pam_unix(login:session): session closed for user root The shell is never spawned. I've checked my inittab which looks like so: 1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6 And my /etc/passwd which properly has bash listed for my root user: root:x:0:0:root:/root:/bin/bash As well as permissions on /tmp (1777) & /root (750). I've attempted re-installing bash, pam, and mingetty to no avail, and confirmed /bin/login exists. Any thoughts would be greatly appreciated. Thanks!! -slashp

  Read the article

• What is the correct authentication mechanism when there are users inside and outside the domain?

  - by Gary Barrett

  We have a Windows 7 enterprise desktop data entry app for mobile (laptop) users with local SQL Express 2008 R2 Express db that syncs data with an SQL Server 2008 R2 Server db. Authentication is required before syncing the data. The existing group of users are part of the organisation's domain so normal scenario and they connect to the Sql Server directly. But there are plans for a second group of app users who belong to various partner organisations so they are outside our domain and have their own various separate domains/accounts. The aim is to deploy the desktop app to them and they will periodically sync data to our SQL Server. What I am uncertain of: Is it possible to authenticate users from another domain? Can permissions be managed via Active Directory etc? Which authentication protocol should be used in this scenario? Windows, Forms, SQL, etc? The IT people are requesting users of the system be managed via Active Directory. Is it possible to manage the external domain users access via Active Directory?

  Read the article

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• ssh many users to one home

  - by filippo

  Hiya, I want to allow some trusted users to scp files into my server (to an specific user), but I do not want to give these users a home, neither ssh login. I'm having problems to understand the correct settings of users/groups I have to create to allow this to happen. I will put an example; Having: MyUser@MyServer MyUser belongs to the group MyGroup MyUser's home will be lets say, /home/MyUser SFTPGuy1@OtherBox1 SFTPGuy2@OtherBox2 They give me their id_dsa.pub's and I add it to my authorized_keys I reckon then, I'd do in my server something like useradd -d /home/MyUser -s /bin/false SFTPGuy1 (and the same for the other..) And for the last, useradd -G MyGroup SFTPGuy1 (then again, for the other guy) I'd expect then, the SFTPGuys to be able to sftp -o IdentityFile=id_dsa MyServer and to be taken to MyUser's home... Well, this is not the case... SFTP just keeps asking me for a password. Could someone point out what am I missing? Thanks a mil, f. [EDIT: Messa in StackOverflow asked me if authorized_keys file was readable to the other users (members of MyGroup). Its an interesting point, this was my answer: Well, it wasn't (it was 700), but then I changed the permissions of the .ssh dir and the auth file to 750 though still no effect. Guess it's worth mentioning that my home dir ( /home/MyUser) is also readable for the group; most dirs being 750 and the specific folder where they'd drop files is 770. Nevertheless, about the auth file, I reckon the authentication would be performed by the local user on MyServer, isn't it? if so, I don't understand the need for other users to read it... well.. just wondering. ]

  Read the article

• Windows thinks outgoing connections are incoming connections?

  - by Slayer537

  I have a rather weird issue.. I'm trying to configure Windows Firewall to block all outgoing connections to a certain app, but allow all incoming. This app is used to transfer files across a network. The reason for this type of setup is to only allow certain users (IP Address) access to the files I have, but to still allow others to see what's available. Since Windows Firewall defaults to allowing all outgoing connections, I made a rule to deny all outgoing connections that were not in the IP ranges I specified. For the incoming connections, I'd like to leave it at allow all, but at the moment it is set to only allow the connections that also have outgoing permissions set. If I blanket say allow all incoming connections, I observe that unauthorized IP Address are able to actually download files, even though their IP was blocked in the outgoing connections. To shed a little more visibility on this, I used NetLimiter to see what was going on. NetLimiter showed me that the connection was an incoming connection. Shouldn't this be an outgoing connection, as I am uploading files to them, not the other way around? Is there a way to make the connection type be correct and show up as outgoing instead of incoming?

  Read the article

• How do I set up dual monitors on Kubuntu 10.04 using the latest nVidia drivers with a 9800M video ca

  - by NoCatharsis

  I'm a Linux newb so please try to keep the lingo low-key. I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA. Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this. Several issues have arisen since installation: 1) I've clicked through all of the display settings to activate the second screen with absolutely no change. 2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure. 3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >