Search Results

Search found 89593 results on 3584 pages for 'so user'.

Page 1658/3584 | < Previous Page | 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665  | Next Page >

  • Latitude D600 USB port problem

    - by Moab
    Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

    Read the article

  • Synchronisation software to find files that have moved paths within a folder?

    - by kpierce8
    Say I have a pictures folder which I reorganized on one computer. I'd like to use that directory as the base and compare it with another version on a backup drive. Will any Synchronisation/compare program find that a file in one folder has moved locations within a compare folder? For instance, say I reorganized my pictures from trips into folders by year with the trips folders inside each year folder. If I use a regular compare utility I wind up with two copies of everything that's moved in different locations.

    Read the article

  • Failing Seagate HDD - Not Recognised

    - by thefragileomen
    I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

    Read the article

  • How to remove an entry from Chrome's Remembered URLs from the url bar?

    - by cmcculloh
    I've got a url in Chrome "local.mysite.com" that autopopulates when I start typing "local.my" into the URL bar. Note that this URL DOES NOT EXIST in my browser history (at chrome://history/#e=1&p=0) because it isn't a real site and therefor couldn't ever be successfully visited and therefor never shows up in my history. The URL I want is "local.mysite.com/subdir/". That URL is like 3 down in the suggested results because I keep accidentally hitting "enter" when it auto-suggests the unwanted first URL and thus re-enforcing it's assumption that that is the one I want. How do I get rid of the "local.mysite.com" entry in Chrome's memory?

    Read the article

  • Why is my computer using so much ram?

    - by Ian
    I have 16gb of ram installed in my computer, and nearly 70% of it is used at all times. Looking at the processes in task manager the memory being used with everything in there doesn't even add up to 2gb. I have RAPID mode enabled on my ssd which may be using 2gb at most so I would understand that. I am thinking there might be a memory leak somewhere, but I don't really know how I would be able to tell. My performance and process list is below:

    Read the article

  • Get Matrox Millenium video card working in Ubuntu 9.10

    - by wcoenen
    I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

    Read the article

  • Trojan infection help please

    - by brandon
    Hey, I was browsing some websites and somehow obtained a trojan through some sort of silent download. Google Chrome started acting funny and wouldn't load web pages and neither would internet explorer. Only Firefox worked. I rebooted my computer and as usual logged into my email account as well as my bank account online completely forgetting about the infection. Could my information have been sent to the person or people or wrote the trojan? I downloaded Zone Alarm and took care of the issue, I'm just worried about when I absentmindedly logged into my email account and bank account online while I was infected.

    Read the article

  • Why does Red5 puke over h.264 mpeg files?

    - by KarateCowboy
    I have a new installation of Red5 on Ubuntu linux. We are using JW Player for clientside. We can pause and skip ahead when streaming FLV files. However when using mp4 files if you pause and then press play again it starts playback at the beginning. If I try to skip ahead it just plays from the beginning.

    Read the article

  • USB TO DB9 Adapter

    - by Ioudas
    I have a USB-to-DB9 adapter, no FCC serial visible anywhere, that I need drivers for. I can't seem to get any relevant info searching on Google. Does anyone have any good ideas where I might be able to get a lead on some drivers? I'll even upload a picture of it.

    Read the article

  • Why does Red5 puke over h.264 mpeg files?

    - by KarateCowboy
    I have a new installation of Red5 on Ubuntu linux. We are using JW Player for clientside. We can pause and skip ahead when streaming FLV files. However when using mp4 files if you pause and then press play again it starts playback at the beginning. If I try to skip ahead it just plays from the beginning.

    Read the article

  • "Must have" Windows Media Center add-ons?

    - by Will
    Where are they? I've seen and used a few, but most of them either look awful or behave badly. Are there any useful add-ons that you would recommend that work and integrate well into Windows Media Center? Yes, I could go to the green button and sift through hundreds of add-ons. I'm looking for the cream of the crop.

    Read the article

  • Canon HV20 recognized, but no drivers in Windows 7 x64

    - by Tuminoid
    My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

    Read the article

  • How can I recover a .pages document with only an iPad?

    - by waiwai933
    I had this problem a few hours ago, and was really frustrated by it, so I'd thought I'd share: Scenario: My computer with Pages has died I have a Pages file on a flash drive that I need now I don't want to reformat the document from a plain text version I have an iPad with Pages I can't email my file to my iPad because Pages files are really folders How can I recover my file?

    Read the article

  • Accidentally ejected my Verbatim drive and can't get the icon back

    - by Erin
    Hi, I have time machine running on my iMac OSX v10.5.8 and also have a Verbatim 1TB attached that I use as a workspace/scratchdisk so I can manipulate large music files before I transfer them. However, when cleaning behind my computer the other day I think I dislodged the connection (or maybe one of the kids hit the eject button, i don't know) however, I've re-booted many times and it's not reconnected. It doesn't appear in my disc utility windown and I don't know how to get the icon back! I've looked in time machine but it doesn't appear there at all (cos it's not supposed to I think - it's not connected - my mate hooked it up for me and he won't return my calls!). Help. I don't know how to get it back! Sorry for being a plank.

    Read the article

  • Copy folder contents using VBScript

    - by LukeR
    I am trying to copy the contents of certain folders to another folder using VBScript. The goal is to enumerate a user's AD groups and then copy specific folder content based on those groups. I have code, which is currently not working. Dim Group,User,objFSO,objFolder,source,target,StrDomain StrDomain = "domain.local" FolderBase = "\\domain.local\netlogon\workgrps\icons" Set net = CreateObject("wscript.network") Struser = net.username target = "\\fs1\users\"&net.username&"\Desktop\AppIcons\" DispUserInWhichGroup() Function DispUserInWhichGroup() On Error Resume Next Set objFSO=CreateObject("Scripting.FileSystemObject") Set User = GetObject("WinNT://" & strDomain & "/" & strUser & ",user") For Each Group In User.Groups source = FolderBase & Group.name Set objFolder = GetFolder(source) For Each file in objFolder.Files objFSO.CopyFile source &"\"& file.name, target&"\"&file.name Next Next End Function This has been cobbled together from various sources, and I'm sure most of it is right, I just can't get it working completely. Any assistance would be great. Cheers.

    Read the article

  • How to specify console (or primary display) for video adapter?

    - by Igor Zinov'yev
    I have an ASUS ENGT440/DI1GD5 video adapter which has three output ports: D-Sub (HD-15), DVI and HDMI. I am using both the D-Sub and DVI ports, but my main monitor is connected to the DVI output. Everything works fine except for which monitor is designated the console during boot. The video adapter seems to prefer the D-Sub output for the console. When both the VGA and DVI monitors are connected, then the VGA monitor always becomes the console which displays the motherboard logo, POST information and booting progress. When only the DVI monitor is connected, then it becomes the console as desired. How do I make the video adapter always use the DVI output (instead of the VGA port) for the console while booting?

    Read the article

  • how to merge changes from original project -- GitHub in Windows

    - by user62046
    I created an account at https://github.com/, fork someone's project so I have my own repository, instal github client for windows, and clone my repository to my local drive. I will work on my local drive. But during the developement of the project, I would like to merge the changes in the official, original, project. I didn't find how to do this. Before, I use tortoiseSVN client for windows, and there is an option "SVN Update" which can update the project to the latest revision. But I am new to Github and its client, and don't know how to do it.

    Read the article

  • Windows 7 pagefile size with large RAM and SSD

    - by Avi
    I've just upgraded my Windows 7 machine from 12GB to 24GB - both for running more VMs and for future proofing. My C driver is an SSD with 129GB formatted size. I was surprised to find out that the SSD only has 68GB free (most of my files are on D: to G:). Researching I found 24GB of my precious C: SSD are taken for virtual memory. So - do I need such large amounts of virtual memory when I have 24GB or RAM? I bought this size of memory so I"d not have to go to disk...

    Read the article

  • Can the traditional remote desktop client be accessed in Windows RT?

    - by nhinkle
    As mentioned in another question, I've been unable to connect through the Remote Desktop metro app to some computers, in particular those requiring VPN access or load balancers. I'm considering purchasing a Microsoft Surface RT, but given that the app store hasn't matured significantly yet and some niche software will likely never be ported to the Modern UI, I must have acess to remote systems somehow. Until Citrix fixes the receiver app for Windows 8, I'm stuck using remote desktop. Which doesn't work. I've heard that Windows RT comes with some of the Microsoft desktop programs built in, like Microsoft Office and File Explorer. Is the "normal" Remote Desktop Connection program available in Windows RT, and if so, is it 100% compatible with previous versions?

    Read the article

  • Protecting a SVN server

    - by user35072
    For various reasons we are finding it increasingly difficult to work with remote workers. We are a very small developer shop and it's becoming impractical to do manual merges on a daily basis. So we're left with little choice (?) but to consider opening up our SVN servers. I'm looking into the following: Full HTTPS session Running non-80 port Strong password policy Is this enough to prevent someone hacking and stealing data? I will also look into VPN but first would like to understand any alternative solutions.

    Read the article

  • Findstr not finding file when searching by extension

    - by feiht thief
    I am experiencing some odd behaviour when using findstr to search a collection of .php files. Depending on how I specify the file list, the file is not being found, even though it contains the string in question. These two files contain the string "personemail": Content.php and People.php A) Works as expected (finds personemail in Content.php and People.php) findstr /i /s /c:"personemail" * B) Fails (finds only in Content.php) - expected to find in Content.php and People.php findstr /i /s /c:"personemail" *.php C) Works as expected (finds in People.php): findstr /i /s /c:"personemail" p*.php What is going on?

    Read the article

< Previous Page | 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665  | Next Page >