Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 167/194 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• Connections to SSH and Samba suffer from heavy delay

  - by Till Helge Helwig

  There are a lot of questions about SSH connections being delayed, which usually can be fixed by disabling the DNS lookups. Unfortunately this doesn't seem to be my problem. Our development server is accessed via SSH and Samba. When opening a connection to the server (either SSH or Samba) it takes a very long time. Accessing a Samba share via Windows is basically impossible because there is a timeout. Using smbclient works, but takes ages. When opening a SSH connection I get immediately prompted for the password and after hitting Enter the terminal instantly shows the MOTD. Afterwards it takes about a minute for the prompt to appear. I watched the load of the server while connecting via SSH and Samba and could not find anything out of order. There is nothing out of the ordinary running and hogging up memory and CPU or something. I have no clue where this delay might come from. I already tried UseDNS no in sshd_config and proxy_dns = no in smb.conf, but to no avail. Any idea about what might cause this would be greatly appreciated!

  Read the article

• Set primary group of file or directory on Samba share from Windows

  - by Hubert Kario

  Short version: I have such situation on a Samba share: $ ls -lha total 12K drwxr-xr-x 3 hka Domain Users 4.0K Jan 11 17:07 . drwxrwxrwt 19 root root 4.0K Jan 11 17:06 .. drwxr-xr-x 2 hka Domain Users 4.0K Jan 11 17:07 dir A -rw-r--r-- 1 hka Domain Users 0 Jan 11 17:07 file A How am I able to change this to following using only Windows SMB/CIFS client (using 3rd party applications is OK) $ ls -lha total 12K drwxr-xr-x 3 hka Domain Users 4.0K Jan 11 17:07 . drwxrwxrwt 19 root root 4.0K Jan 11 17:06 .. drwxr-xr-x 2 hka ntpoweruser 4.0K Jan 11 17:07 dir A -rw-r--r-- 1 hka ntpoweruser 0 Jan 11 17:07 file A Rationale and background info I'm using POSIX ACLs on Samba shares. Together with acl group control for Samba, it allows me to delegate management of permissions to different users based on group membership. Thing is, when I create a new file on a Samba share, I'm unable to set its primary group (the one that grants permission to change its permissions). It's being set to my primary group (Domain Users) or group set using force group option in smb.conf share definition. Removing all groups in windows except the one I want to become the new primary group doesn't work. I can change it using chgrp group folder/ as regular user though shell, but it's suboptimal (not all users are *nix users). Trying to set new owner to group from Windows file permission window makes the Samba to return permission denied with following log entry: [2012/01/05 21:13:03.349734, 3] smbd/nttrans.c:1899(call_nt_transact_set_security_desc) call_nt_transact_set_security_desc: file = projects/project A/New folder, sent 0x1 [2012/01/05 21:13:03.349774, 3] smbd/posix_acls.c:1208(unpack_nt_owners) unpack_nt_owners: unable to validate owner sid for S-1-5-21-4526631811-884521863-452487935-11025 [2012/01/05 21:13:03.349804, 3] smbd/error.c:80(error_packet_set) error packet at smbd/nttrans.c(1909) cmd=160 (SMBnttrans) NT_STATUS_INVALID_OWNER The SID is correct and belongs to group I specified in GUI.

  Read the article

• Implications of Multiple JobTracker nodes in a Hadoop cluster?

  - by Jim Dennis

  I get the impression that one can, potentially, have multiple JobTracker nodes configured to share the same set of MR (TaskTracker) nodes. I know that, conventionally, all the nodes in a Hadoop cluster should have the same set of configuration files (conventionally under /etc/hadoop/conf/ --- at least for the Cloudera Distribution of Hadoop (CDH). Can we define multiple Job Trackers in mapred-site.xml? Something like: <configuration> <property> <name>mapred.job.tracker</name> <value>jt01.mydomain.not:8021</value> </property> <property> <name>mapred.job.tracker</name> <value>jt02.mydomain.not:8021</value> </property> ... </configuration> Or is there some other allowed syntax for this? What are the implications of doing this. Does each JobTracker get information about the load on each TaskTracker node. In other words can the two JobTracker co-ordinated their scheduling across the TT nodes only based on the gossip information from the TTs or would they need to talk to one another? Is this documented anywhere?

  Read the article

• Play framework 2.2 using Upstart 1.5 (Ubuntu 12.04)

  - by Leon Radley

  I'm trying to get Play 2.2 working with upstart. I've been running Play 2.x with upstart since it's release and it's never been a problem. But since the release of 2.2 and the change to http://www.scala-sbt.org/sbt-native-packager/ play doesn't want to start any more. Here's the config I'm using description "PlayFramework 2.2" version "2.2" env APP=myapp env USER=myuser env GROUP=www-data env HOME=/home/myuser/app env PORT=9000 env ADDRESS=127.0.0.1 env CONFIG=production.conf env JAVAOPTS="-J-Xms128M -J-Xmx512m -J-server" start on runlevel [2345] stop on runlevel [06] respawn respawn limit 10 5 expect daemon # If you want the upstart script to build play with sbt pre-start script chdir $HOME sbt clean compile stage -mem $SBTMEM end script exec start-stop-daemon --pidfile ${HOME}/RUNNING_PID --chuid $USER:$GROUP --exec ${HOME}/bin/${APP} --background --start -- -Dconfig.resource=$CONFIG -Dhttp.address=$ADDRESS -Dhttp.port=$PORT $JAVAOPTS I've changed the JAVAOPTS to include the -J- and I've also changed the path to use the new startscript located in the /bin/ dir. I've read that upstart 1.4 has setuid and setguid. I've tried removing the start-stop-daemon but I haven't got that working either. Any suggestions would be appreciated.

  Read the article

• dnsmasq Client TTL

  - by user548971

  I have a situation where my hosts file is constantly changing. Because of this I don't want clients to cache ip addresses resolved using the hosts file. Here is the command that starts dnsmasq for me: /usr/sbin/dnsmasq -K -R -y -Z -b -E -S 8.8.8.8 -l /tmp/dhcp.leases -r /tmp/resolv.conf.auto --stop-dns-rebind --rebind-localhost-ok --dhcp-range=lan,192.168.2.2,192.168.2.249,255.255.255.0,12h -2 eth0 In looking at this site: http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html I see that the -T option has this description: -T, --local-ttl=<time> When replying with information from /etc/hosts or the DHCP leases file dnsmasq by default sets the time-to-live field to zero, meaning that the requester should not itself cache the information. This is the correct thing to do in almost all situations. This option allows a time-to-live (in seconds) to be given for these replies. This will reduce the load on the server at the expense of clients using stale data under some circumstances. My command doesn't have the -T option. Do I need it or does dnsmasq default TTL to zero without it?

  Read the article

• Postfix : outgoing mail in TLS for a specific domain

  - by vercetty92

  I am trying to configure postfix to send mail in TLS (starttls in fact), but only for a specific destination. I tried with "smtp_tls_policy_maps". This is the only line in my main.cf file regarding TLS configuration, but it seems not working. Here is my main.cf file: queue_directory = /opt/csw/var/spool/postfix command_directory = /opt/csw/sbin daemon_directory = /opt/csw/libexec/postfix html_directory = /opt/csw/share/doc/postfix/html manpage_directory = /opt/csw/share/man sample_directory = /opt/csw/share/doc/postfix/samples readme_directory = /opt/csw/share/doc/postfix/README_FILES mail_spool_directory = /var/spool/mail sendmail_path = /opt/csw/sbin/sendmail newaliases_path = /opt/csw/bin/newaliases mailq_path = /opt/csw/bin/mailq mail_owner = postfix setgid_group = postdrop mydomain = ullink.net myorigin = $myhostname mydestination = $myhostname, localhost.$mydomain, localhost masquerade_domains = vercetty92.net alias_maps = dbm:/etc/opt/csw/postfix/aliases alias_database = dbm:/etc/opt/csw/postfix/aliases transport_maps = dbm:/etc/opt/csw/postfix/transport smtp_tls_policy_maps = dbm:/etc/opt/csw/postfix/tls_policy inet_interfaces = all unknown_local_recipient_reject_code = 550 relayhost = smtpd_banner = $myhostname ESMTP $mail_name debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5 And here is my "tls_policy" file: gmail.com encrypt protocols=SSLv3:TLSv1 ciphers=high I also tried gmail.com encrypt My wish is to use TLS only for the gmail domain. With this configuration, I don't see any TLS line in the source of the mail. But if I tell postfix to use TLS if possible for all destination with this line, it works: smtp_tls_security_level = may Beause I can see this line in the source of my mail: (version=TLSv1/SSLv3 cipher=OTHER); But I don't want to try to use TLS for the others domains...only for gmail... Do I miss something in my conf? (I also try whith "hash:/etc/opt/csw/postfix/tls_policy", and it's the same) Thanks a lot in advance

  Read the article

• BIND: forward 1st level zone

  - by raven

  First of all: sorry for the language, English is not my primary language. I have star-like DNS structure with many filials (more that 2): ^ | v filialNS_1.filial_1.city.local <---- ns.main.city.local <---- filialNS_2.filial_2.city.local ^ | v ns.mail.city.local is slave of all filials zones filialNS_1 is master of filial_1.city.local filialNS_2 is master of filial_2.city.local filialNS_N is master of filial_N.city.local I want to: serve DNS queries for xxx.filial_N.city.local with filialNS_N.filial_N.city.local forward all queries for xxx.xxx.xxx.local from filialNS_N to ns.main.city.local forward other queries to our provider's DNS on filial (or google-public-dns or anything else) FILIAL CONFIG named.conf zone "filial_1.city.local" { type master; file "/etc/namedb/dynamic/filial_1.city.local"; allow-update { key DHCP_UPDATER; }; allow-transfer { <ns.main.city.local IP address> }; }; zone "2.76.10.in-addr.arpa" { type master; file "/etc/namedb/dynamic/2.76.10.in-addr.arpa"; allow-update { key DHCP_UPDATER; }; allow-transfer { <ns.main.city.local IP address> }; }; zone "local." { type forward; forward only; forwarders { <ns.main.city.local IP address> }; }; nslookup server.filial_1.city.local - works fine nslookup server.main.city.local Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find server.main.city.local: NXDOMAIN Where am I going wrong?

  Read the article

• Samba share will not connect (was working yesterday)

  - by David Gard

  I have a CentOS websver with a Samba share set up (\\webserver\websites). I was connected to this share just yesterday without issue, but today my Windows 8 PC will not connect to it. I've also tried making a connection from Windows 7 and Windows XP, all without success. I initially tried restarting my computer, but that did not work. I then tried restarting the Samba service on the webserver (service smb restart), and when that failed I restarted the webserver. All of that was to no avail, and I still cannot connect to the share. The webserver is contactable from my PC (and the others I tried), as the websites it hosts work fine and I'm able to Putty to the server. When connected to the webserver, I can see that Samba is running by using service smb status - service smb status smbd (pid 4685) is running... nmbd (pid 4688) is running... Can anyone please help me to get this share working? Here is my full Samba config (/etc/samba/smb.conf) - [global] workgroup = MYGROUP server string = Samba Server %v log file = /var/log/samba/log.%m max log size = 50 security = user encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 local master = no [websites] comment = Websites browseable = yes writable = yes path=/var/www/html/ valid users = dgard

  Read the article

• Weird Apache behaviour and with files again

  - by afifio

  Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

  Read the article

• How do I set up dual monitors on Kubuntu 10.04 using the latest nVidia drivers with a 9800M video ca

  - by NoCatharsis

  I'm a Linux newb so please try to keep the lingo low-key. I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA. Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this. Several issues have arisen since installation: 1) I've clicked through all of the display settings to activate the second screen with absolutely no change. 2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure. 3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.

  Read the article

• kde dropping keyboard

  - by shabbychef

  I am having problems with KDE 'dropping' my keyboard. It happens periodically when using my gentoo box directly, but has become much worse when accessing via NX (from a Mac laptop). Some possibly irrelevant clues: it appears to happen more often when the system is under higher CPU load the mouse continues to work, but no windows will accept any kind of keyboard focus. kwin will not accept tabbing between windows. when working on the machine directly, I can ctrl-alt-F1 to get to a shell (obviously this does nothing over NX). so I think it is KDE and not xorg. am running kwin-4.3.5-r1, and KDE-4.3.5 generally. this problem definitely appeared after upgrading to kde-4.x, but I do not remember if it appeared in kde-4.2. sometimes the keyboard will reappear, but sometimes I have to kill my kde session. playing with accessibility options or window-focus-stealing options in system-settings under kde will often make the keyboard responsive again, only to drop it perhaps minutes later. I had read online this might be an evdev problem under X (again, I think this is KDE, not X, but will try anything). as a result, I have fiddled with my xorg.conf endlessly. I even deleted it entirely and let nvidia-xconfig have a stab at it, with no luck I am tearing my hair out over this. I have done emerge -e xorg-server and am right now doing emerge -e kwin, to rebuild all packages that might be relevant. no luck with the xorg-server rebuild. any help appreciated. thanks,

  Read the article

• Nginx flv audio pseudo stream works but video is not loading

  - by sarah

  I am working on a development server for a company & they want nginx webserver to work with. So the requirements for their company is, it should be capable of doing following things i.e hotlink protection, mp4 & flv pseudo stream & secure streaming. However nginx fulfills their requirements and i am configuring their server from past 2 days as i am new to this field so i've only acheived hotlinking prevention in past 2 days. But the problem on which i am stuck is flv pseudo streaming, to make work to mp4 pseudo stream it was just a piece of paper but i am really fuc*ed up with flv pseudo stream. I have converted my flv videos with flvmdi tools to insert many keyframes but the problem is , when i try to seek video from following keyframes that are generated by flvmdi i.e test.flv?start=2681223, video does not load but audio pseudo works fine. So it means no problem with my flv configuration in nginx.conf file. And the forum that i used to compile my nginx-1.2.1 is http://h264.code-shop.com/trac/wiki/Mod-H264-Streaming-Nginx-Version2 & by adding additional module --with-http_flv_module. This forum is really active, hopes i will resolve my problem as soon as you guys will provide me some guide.

  Read the article

• Suspending/Screen Going Off When Still In Use (Ubuntu & Arch)

  - by luke

  I have a laptop (HP Pavilion G6) that was running Ubuntu and for a while now (at least 6 months) has been having a problems randomly suspending whilst still in use with a full battery and still being charged. Originally the problem was with Ubuntu so I first attempted to disable suspend using every way I could find (gui settings + dconf editor) this didn't work and it still kept suspending so I ended up switching to Arch Linux. Unfortunately not long after switching to Arch Linux I ended up experiencing the same problems. So yet again I modified the settings in /etc/systemd/logind.conf to prevent it from suspending and this time it worked, kind of. Now I am experiencing the screen going off and I have to change to a different tty (by using ctrl-alt-fx, which was something I also found I had to do sometimes when waking up from suspend in Ubuntu) to get the screen to go back on. The strange thing is this only happens when running a Linux distros and only occasionally (e.g. it may happen once/twice a week at most). But when it does happen it can happen multiple times in a row. And it only seems to happen when I am using it. This may just mean that it hasn't happened yet when I am not but generally if I leave it to run something or play a video it hasn't occurred only when I am using it regardless of which program I am using (e.g. it has occurred when using firefox, vim, even when using a virtualbox vm). At first I thought it could be the CPU temperature but after monitoring it I discovered it occurred a lot of the time when my CPU was less than 50 °C. I then checked /var/log/* but could not see anything related to it suspending only a few standard things from when it was woken up. I am really out of ideas and really hoping someone can help. Thanks in advance.

  Read the article

• ping: unknown host google.com

  - by Tar

  Relevant output: /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 servers_ip_address server.2006scape.com server /etc/resolv.conf search 2006scape.com #Generated by NetworkManager nameserver 8.8.8.8 nameserver 8.8.4.4 Some stuff from tcpdump 07:46:28.795843 IP server_ip.42841 > 8.8.4.4.domain: 60253+ PTR? 87.127.104.87.in-addr.arpa. (44) 07:46:28.795980 IP server_ip.54001 > 8.8.4.4.domain: 7390+ PTR? 60.187.80.98.in-addr.arpa. (43) 07:46:28.804029 IP server_ip.59667 > 8.8.4.4.domain: 58876+ PTR? 134.154.161.72.in-addr.arpa. (45) 07:46:28.884171 IP server_ip.46255 > 8.8.4.4.domain: 63027+ PTR? 195.156.251.84.in-addr.arpa. (45) 07:46:28.884217 IP server_ip.35426 > 8.8.4.4.domain: 10538+ PTR? 118.3.182.166.in-addr.arpa. (44) 07:46:28.884253 IP server_ip.53635 > 8.8.4.4.domain: 29928+ PTR? 230.94.81.83.in-addr.arpa. (43) 07:46:28.884286 IP server_ip.45787 > 8.8.4.4.domain: 41151+ PTR? 18.32.223.121.in-addr.arpa. (44) 07:46:28.946045 IP server_ip.47246 > 8.8.4.4.domain: 43103+ PTR? 81.70.251.84.in-addr.arpa. (43) 07:46:28.946066 IP server_ip.33208 > 8.8.4.4.domain: 61117+ PTR? 69.170.184.71.in-addr.arpa. (44) Anyone have any input as to what is causing this?

  Read the article

• Multiple logins with pam_mount means multiple (redundant) mounts ...

  - by Jamie

  I've configured pam_mount.so to automagically mount a cifs share when users login; the problem is if a user logs into multiple times simultaneously, the mount command is repeated multiple times. This so far isn't a problem but it's messy when you look at the output of a mount command. # mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) //srv1/UserShares/jrisk on /home/jrisk type cifs (rw,mand) I'm assuming I need to fiddle with either the pam.d/common-auth file or pam_mount.conf.xml to accomplish this. How can I instruct pam_mount.so to avoid duplicate mountings?

  Read the article

• How to autorun wpa_supplicant on Debian startup

  - by The Electric Muffin

  I'd like to run wpa_supplicant -D wext -i wlan0 -c /etc/wpa_supplicant.conf on Debian startup (runlevels 2-5). I found some vague instructions from a related question that said to put a script in /etc/init.d/ and then symlink to it from the apropriate /etc/rcRUNLEVEL.d/ directories. However, I noticed that there are already some files named "wpasupplicant" that probably run at startup: /etc/network/if-down.d/wpasupplicant /etc/network/if-post-down.d/wpasupplicant /etc/network/if-pre-up.d/wpasupplicant /etc/network/if-up.d/wpasupplicant They all are symlinks to the same script, /etc/wpa_supplicant/ifupdown.sh. It has a comment at the beginning saying it "[...] allows ifup(8), and ifdown(8) to manage wpa_supplicant(8) and wpa_cli(8) processes running in daemon mode." However, the closest it gets to calling wpa_supplicant itself is (in functions.sh): WPA_SUP_BIN="/sbin/wpa_supplicant" [snip] start-stop-daemon --start --oknodo $DAEMON_VERBOSITY \ --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \ -- $WPA_SUP_OPTIONS $WPA_SUP_CONF [snip] start-stop-daemon --stop --oknodo $DAEMON_VERBOSITY \ --exec $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE Does that mean it's safe to make an init.d script for wpa_supplicant, and if so what would it look like? General info: Debian Squeeze (5.0) official wpasupplicant package (v0.6.10-2.1) The full contents of my system's functions.sh and ifupdown.sh are here (dependent, of course, on my system's uptime—it's a five-year-old laptop that greatly enjoys overheating): functions.sh ifupdown.sh

  Read the article

• What is the reason for this DNSSEC validation failure of dnsviz.net?

  - by grifferz

  On trying to resolve dnsviz.net from a host using an Unbound resolver that is configured to use DNSSEC validation, the result is "no servers could be reached": $ dig -t soa dnsviz.net ; <<>> DiG 9.6-ESV-R4 <<>> -t soa dnsviz.net ;; global options: +cmd ;; connection timed out; no servers could be reached Nothing is logged by Unbound to suggest why this is the case. Here is the /etc/unbound/unbound.conf: server: verbosity: 1 interface: 192.168.0.8 interface: 127.0.0.1 interface: ::0 access-control: 0.0.0.0/0 refuse access-control: ::0/0 refuse access-control: 127.0.0.0/8 allow_snoop access-control: 192.168.0.0/16 allow_snoop chroot: "" auto-trust-anchor-file: "/etc/unbound/root.key" val-log-level: 2 python: remote-control: control-enable: yes If I add: module-config: "iterator" (thus disabling DNSSEC validation) then I am able to resolve this host normally. The domain and its DNSSEC check out fine according to http://dnscheck.iis.se/ so there must be something wrong with my resolver configuration. What is it and how do I go about debugging that?

  Read the article

• Getting Started in SuSE as an Ubuntu User

  - by Subhamoy Sengupta

  I am not a Linux newbie, but haven't touched SuSE in a very very long time (last time I tried it, it was SuSE 7!). Finally now I felt like giving it a try, and many things seem strange or unnecessarily complex. I have a series of questions. How do I ensure that my packages are uptodate? It sounds silly, but I tried the obvious methods already. I have disabled the default repositories that show up when you do zypper lr, and added Tumbleweed and packman repositories (Essentials, Multimedia, Extra). Then I did a sudo zypper ref --force and then sudo zypper dup, and it tells me many dependencies are not met. I have already added solder.allowVendorChange=true to /etc/zypp/zypp.conf, so it should not care which repository the latest versions are in, and just upgrade to it. Even when I chose to skip the packages with unmet dependencies, and seemed like quite a bit happened in the background, I opened Firefox afterwards and the version was 7! I am guessing things did not go as expected. But of course this is not a problem with SuSE, but I am not understanding the system right. How do I do it right? When I start typing arguments of a command, for example sudo zypper install, when I type sudo zypper ins and keep hitting TAB, nothing happens! It always worked in Ubuntu and I feel very uneasy with this. Is this how SuSE is supposed to be? When I try to install something, and I start writing its name, even though the package exists and I am sure of it, hitting TAB does not autocomplete it. This is also quite inconvenient. Why is it not happening? There are many things in SuSE that are really great, and I think I will stay with it and not go back to Ubuntu once I settle these very rudimentary issues. But right now they are giving me a lot of grief! Please help!

  Read the article

• How can I measure actual memory usage from my running processes?

  - by NullUser

  I have two servers, server1 and server2. Both of them are identical HP blades, running the exact same OS (RHEL 5.5). Here's the output of free for both of them: ### server1: total used free shared buffers cached Mem: 8017848 2746596 5271252 0 212772 1768800 -/+ buffers/cache: 765024 7252824 Swap: 14188536 0 14188536 ### server2: total used free shared buffers cached Mem: 8017848 4494836 3523012 0 212724 3136568 -/+ buffers/cache: 1145544 6872304 Swap: 14188536 0 14188536 If I understand correctly, server2 is using significantly more memory for disk I/O caching, which still counts as memory used. But both are running the same OS and if I remember correctly, I configured both with the same parameters when they were installed. I did a diff on /etc/sysctl.conf and they are identical. The problem is, I am collecting memory usage and other metrics over a period of time, (eg: vmstat, iostat, etc.) while a load is generated on the system. The memory used for caching is throwing off my calculations on the results. How can I measure actual memory usage from my running processes, rather than system usage? Is used - (buffers + cached) a valid way to measure this?

  Read the article

• The plugin of munin is always timed out

  - by haoX

  I want to use munin to make a graph of ttyACM0 in Linux, but munin can not create the graph. I found some information in "munin-node.log". it shows that "Service 'temperature' timed out". So I changed timeout to 60 or 120 in /munin/plugin-conf.d/munin-node, but it does not work. It's also timed out. Here is part of my code: if [ "$1" = "config" ]; then echo 'graph_title Temperature of board' echo 'graph_args --base 1000 -l 0' echo 'graph_vlabel temperature(°C)' echo 'graph_category temperature' echo 'graph_scale no' echo 'graph_info This graph shows the temperature of board' for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" ;; 2) TYPE="HDD" ;; 3) TYPE="PHY" ;; 4) TYPE="CPU" ;; 5) TYPE="Ambience" ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.label $TYPE"; fi done exit 0 fi for i in 1 2 3 4 5; do case $i in 1) TYPE="Under PCB" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $1}') ;; 2) TYPE="HDD" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $2}') ;; 3) TYPE="PHY" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $3}') ;; 4) TYPE="CPU" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $4}') ;; 5) TYPE="Ambience" VALUE=$(head -1 /dev/ttyACM0 | awk '{print $5}') ;; esac name=$(clean_name $TYPE) if [ "$TYPE" != "NA" ]; then echo "temp_$name.value $VALUE" fi

  Read the article

• Hearing a clicking noise from soundcard all the time

  - by Mehrdad

  I have installed Fedora 17 on my laptop. A few days ago I updated my fedora (but not upgraded). I shut down my computer and since the next time I turned it on I am hearing a clicking noise all the time from speakers. Even when I plug my headphones in I hear the noise through the headphone. I surfed over the internet and found the following shell commands: su -c 'echo "options snd_hda_intel power_save=0" /etc/modprobe.d/snd_hda_intel.conf' su -c 'echo 0 /sys/module/snd_hda_intel/parameters/power_save' I tried them but they didn't work. Here is the part of "lspci" command related to my sound-card: 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) I have to add that my sound-card is working and I can play some audio file, I mean I can hear the voice and noise simultaneously. But everything is OK in windows xp which is also installed on my laptop. Could it be related to the sound-card driver? If so, how can I revert it to the previous version?

  Read the article

• Httpd and LDAP Authentication not working for sub-pages

  - by DavisTasar

  I just recently installed a Nagios implementation, and I'm trying to get LDAP authentication working for httpd on Red Hat. (nagios.conf for Apache config below, sanitized of course) ScriptAlias /nagios/cgi-bin "/usr/local/nagios/sbin" <Directory "/usr/local/nagios/sbin"> #SSLRequireSSL Options ExecCGI AllowOverride none AuthType Basic AuthName "LDAP Authentication" AuthLDAPURL "ldap://my.domain.controller:389/OU=Users,DC=my,DC=domain,DC=controller?sAMAccountName?sub?(objectClass=user)" NONE AuthzLDAPAuthoritative off AuthLDAPBindDN "CN=NagiosAdmin,DC=my,DC=domain,DC=controller" AuthLDAPBindPassword "myPassword" require valid-user </Directory> Alias /nagios "/usr/local/nagios/share" <Directory /usr/local/nagios/share> #SSLRequireSSL Options None AllowOverride none AuthBasicProvider ldap AuthType Basic AuthName "LDAP Authentication" AuthzLDAPAuthoritative off AuthLDAPURL "ldap://my.domain.controller:389/OU=Users,DC=my,DC=domain,DC=controller?sAMAccountName?sub?(objectClass=user)" NONE AuthLDAPBindDN "CN=NagiosAdmin,DC=my,DC=domain,DC=controller" AuthLDAPBindPassword "myPassword" require valid-user </Directory> Now, the initial authentication works, so when you first hit the page you can log in just fine. However, when you go anywhere else, it prompts you for authentication, fails (asking for a re-prompt), and gives this error message: [Mon Oct 21 14:46:23 2013] [error] [client 172.28.9.30] access to /nagios/cgi-bin/statusmap.cgi failed, reason: verification of user id '<myuseraccount>' not configured, referer: http://<nagiosserver>/nagios/side.php I'm almost certain its a simple flag or option, but I just can't find it, and I don't have a lot of experience working with Apache. Any assistance or help would be greatly appreciated.

  Read the article

• Ubuntu Server Wireless connection issue - replaced router but kept ESSID

  - by Stevo

  I have a ubuntu server 12.04 which was connected to my wireless network with no problem I replaced the wireless router but kept the ESSID and password the same. All other devices on network have connected correctly. However the Ubuntu Server will not route correctly. It will connect to the wifi router, and get a dhcp served IP address, however it will not route anything. I cannot ping the router from the server. the contents of /etc/resolve.conf are updated with the information from the router, (the host name has been served) I know there is nothing wrong with the router or the server, or the wireless card etc. I'm assuming there's some cached setting that associates the old router with the ESSID and causing the issue. I've got a lot of other devices connected to the router, so don't want to change the name of the ESSID. How do I fix this? EDIT: outputs (abbreviated as I've got no cut and paste) netstat -rn: Kernel IP Routing table Dest Gate Gen Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0. UG 0 0 0 wlan0 192.168.0.0 0.0.0.0. 255.255.255.0 U 0 0 0 wlan0

  Read the article

• Subversion error: Repository moved permanently to please relocate

  - by Bart S.

  I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. (it does now - see edit) My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this? -- Edit So I restarted apache (again) and tried it again and now it give me an error message, but it doesn't really help. Anyone have an idea what it means? [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] Could not fetch resource information. [403, #0] [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] (2)No such file or directory: The URI does not contain the name of a repository. [403, #190001] -- Edit 2 If I do svn info it doesn't give anything usefull: [root@eduro eduro.nl]# svn info http://svn.domain.com/repos/ Username: username Password for 'username': svn: Repository moved permanently to 'http://svn.domain.com/repos/'; please relocate I also tried doing a local checkout (svn checkout file:///var/www/svn/repos/reposname) and that works fine (also adding / commiting works fine). So it seems is has something to do with apache. Some other information: I'm running CentOs 5.3 Plesk 9.3 Subversion, version 1.6.9 (r901367) -- Edit 3 I tried moving the repositories, but it didn't make any difference. selinux is disabled so that isn't it either. -- Edit 4 Really? Nobody :(?

  Read the article

• Adjust output Brightness/Gamma/Colors in Gnome

  - by Mikee

  We have a desktop system running Ubuntu 8.04.4, and it is connected to a standard desktop LCD monitor. Unfortunately, in 8.04.4, the brightness of the image is cranked way up. It appears to be a graphics driver issue. Unfortunately, installing a newer GPU driver for this Intel GPU is very difficult to do. So, I am looking for a software (or config file?) solution to achieve this. Note: Ubuntu 9.10 and higher do not exhibit this issue, so this is not a hardware problem. Note: VNC-ing to this machine from another does not exhibit this issue either. Also, I installed "DisplayCalibrator.app", and it does not work very well (the app comes up, but the contents of the window are blank). Is there anything that I can add to the xorg.conf file to correct this issue? Also, this solution: http://superuser.com/questions/96539/adjust-contrast-and-brightness-in-ubuntu did not resove my issue. Thank you all for the help!

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >