Search Results

Search found 7415 results on 297 pages for 'man behind'.

Page 167/297 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• How to create RPM for 32-bit arch from a 64-bit arch server?

  - by Gnanam

  Our production server is running CentOS5 64-bit arch. Because there are no RPM available currently for SQLite latest version (v3.7.3), I created RPM using rpmbuild the very first time by following the instructions given here. I was able to successfully create RPM for 64-bit (x86_64) architecture. But am not able to create RPM for 32-bit (i386) architecture. It failed with the following errors: ... ... ... + ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --target=i386-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-threadsafe checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for x86_64-redhat-linux-gnu-gcc... no checking for gcc... gcc checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. error: Bad exit status from /var/tmp/rpm-tmp.73141 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.73141 (%build) This is the command I called: rpmbuild --target i386 -ba sqlite.spec My question is, how do I create RPM for 32-bit arch from a 64-bit arch server?

  Read the article

• Unable to get prosody running on Ubuntu 10.04 (lua issues)

  - by user90374

  All this is performed on Ubuntu 10.04.4 LTS Server I installed LUA 5.1.4 following this procedure - http://ubuntuforums.org/showthread.php?t=1874860 I installed prosody following this command (after downloading the package) - sudo dpkg -i prosody_0.8.2-1_i386.deb After installation, I get the following error: I have tried to use as suggested luarock and sudo apt-get install to fix these. But still it keeps showing me these errors. Selecting previously deselected package prosody. (Reading database ... 59416 files and directories currently installed.) Unpacking prosody (from prosody_0.8.2-1_i386.deb) ... Setting up prosody (0.8.2-1) ... * Starting Prosody XMPP Server prosody ************** Prosody was unable to find luaexpat This package can be obtained in the following ways: Source: www[dot]keplerproject[dot]org/luaexpat/ Debian/Ubuntu: sudo apt-get install liblua5.1-expat0 luarocks: luarocks install luaexpat luaexpat is required for Prosody to run, so we will now exit. More help can be found on our website, at prosody[dot]im/doc/depends ************ Prosody was unable to find luasocket This package can be obtained in the following ways: Source: www[dot]tecgraf[dot]puc-rio[dot]br/~diego/professional/luasocket/ Debian/Ubuntu: sudo apt-get install liblua5.1-socket2 luarocks: luarocks install luasocket luasocket is required for Prosody to run, so we will now exit. More help can be found on our website, at prosody[dot]im/doc/depends ************ Prosody was unable to find LuaSec This package can be obtained in the following ways: Source: www[dot]inf[dot]puc-rio[dot]br/~brunoos/luasec/ Debian/Ubuntu: prosody[dot]im/download/start#debian_and_ubuntu luarocks: luarocks install luasec SSL/TLS support will not be available More help can be found on our website, at prosody[dot]im/doc/depends [fail] invoke-rc.d: initscript prosody, action "start" failed. dpkg: error processing prosody (--install): subprocess installed post-installation script returned error exit status 1 Processing triggers for man-db ... Processing triggers for ureadahead ... Errors were encountered while processing: prosody Thanks a lot for your patience and answers.

  Read the article

• VNC as a Support Tool Over the Internet

  - by dosboy

  I'd like to set up an environment where I can use VNC to remotely support my clients over the internet. No VPNs involved. I've used the UltraVNC repeater in the past, but the problem is that it requires a dedicated Windows server. What I'd like to do is as follows: VNC Client (me) - NAT - Internet - NAT - VNC Server (the person I'm offering support to) I'd basically like the same functionality that the UltraVNC repeater offers, but the only internet environment I have to host something on is a Linux shared server (standard hosting - PHP, Apache, etc.). Requirements: Multiple platform support for both Client and Server - specifically Mac and Windows Allows for connection with multiple NATs involved (Client and Server side) Will allow me to use my existing hosting environment for any repeater that might be involved I believe the way this would work is that the Server (the person I'm offering support to) when online would connect to a listener on the internet. When they needed support I would connect my Client to the same listener, see them connected, and use the listener (man-in-the-middle) to piggyback my Client to connect to their Server. I'm open to using any software (not limiting myself to VNC) but would prefer a FOSS solution (which is why I'm leaning towards VNC). Any advice would be greatly appreciated.

  Read the article

• CodePlex Daily Summary for Saturday, December 11, 2010

  CodePlex Daily Summary for Saturday, December 11, 2010Popular ReleasesEnhSim: EnhSim 2.2.1 ALPHA: 2.2.1 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated th...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.DNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration valueMy Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...Power Assert .NET: Power Assert 1.0.1: Minor bugfixes, added PAssert.Throws method to ensure that an operation throws an exceptionExcelLite: Lite Excel Binaries: "Lite Excel Binaries" contains two required Silverlight DLLs Following samples require reference of the "Excel Lite Binaries" , "Writing Image to Excel" is an example silverlight application for writing silverlight image to excel "Writing Data to Excel" is example application of how to write/export silverlight data to an excel file using Excel Lite "Reading Excel file" is sample application demonstrating excel reading with ExcelLiteMenu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.3 Beta: - Added keyboard navigation support with access keys - Shortcuts like Ctrl-Alt-A are now supported(where the browser permits it) - The PopupMenuSeparator is now completely based on the PopupMenuItem class - Moved item manipulation code to a partial class in PopupMenuItemsControl.cs - Moved menu management and keyboard navigation code to the new PopupMenuManager class - Simplified the layout by removing the RootGrid element(all content is now placed in OverlayCanvas and is accessed by the new ...New Projectsbuildandrelease: SCM continuous intergration cruisecontrol.net buildandrelease installer automation testing virtual machine infrastructureContent Link Web Part: The ContentLink webpart works like the ContentEditor webpart in ContentLink mode, but does not require you to configure anonymous access. ContentLink is useful for showing common content stored in a central document library for use across different site-collections.CoralCube: Dieses Projekt hat das Ziel eine gute Core zu entwickeln.CRM_Contabil: Criado para uso em escritórios de contabilidade, onde o cliente faz chamadas p/empresa ou chamadas entre funcionários da própria empresa.A empresa manterá um banco de dados com soluções em respeito a dúvidas do cliente e saberá qual cliente utiliza mais seus serviços.CsvImporter: Csv importer is a robust application to make bulk imports to a MSSQL Database. I'm looking forward to add oracle support. This importer works like many web admin importers,except this let you know the register is inserting in a determinate moment, successful and failed query's.CWS - Client Web Services Framework: Client Web Service is a different concept for script reference at client-side. The idea behind client web services is to abstract the concept of client scripts behind the concept of client services. The script reference process is fully encapsulated inside CWS api. Enjoy!DirectDraw APIs Usage in WinCE and WinMobile: DDrawTest application shows how to use the Hardware layers of display controller of different application processor in WinCE and Windows Mobile devices.EasyMapping: EasyMapping makes OR Mapping Configuration easy, writing code easy The first version only support SQLSever Framework version: 3.5 Language: C# ExcelLite: ExcelLite is a C#/Silverlight library for Silverlight applications that can read and write MS Excel files without COM interaction. You can manipulate MS Excel files totally on client side as this library using Binary excel format to read and write data to excel files.Frozen Bubble XNA: A port of the well known Linux game Frozen Bubble from Perl to c# and XNA. The ported game runs on Windows and Windows Phone 7.GetThatList: With GetThatList people will find an easy way to copy a music playlist and its songs to another location, being another folder or a remote computer. It is designed so that it can be exposed to the final user as an standalone application or a Shell extension for playlist files.lightsurfer: Generate and smooth terrain landshaft easily. C++, DirectX 10 and UI in WPF in perspective.microstockUploader: Uploads multiple JPEG images with additional files (RAW, EPS) to multiple microstocks. Supports FTP resume. Supports buggy routers which drop FTP connection after some timeout.Network Monopolizer: Network Monopolizer is a simple program that monopolizes your network. when run, it will overrun your current network with requests, thus it won't work correctly anymore. It contacts five sites a millisecond. This can be used mainly at an airport.niensiesta: No naps!QScript: QScript is a contract-oriented language that supports runtime contract inference, on-fly object construction, lambdas. The main idea of QScript is to provide maximum functionality with minimum efforts.Sequin Sequence Mining Library: Sequin is an open source sequence mining library written in C#.Sitefinity Controls: Sitefinity Controls is a collection of custom controls developed for Sitefinity that I thought might be useful for others. It is developed in C#.Surfix: Surfix is an open source framework built on top of .net Framework. It Provide a set of capabilities and modules such as: Logging, Extension methods for ado.net entity framework, Localization Module, Security Module and so on. This framework is built on top a database Sql Server,.Umbraco AD and Default Membership Provider: This is a Membership provider for Umbraco. It support AD authentication, but only if the user account is already created by the admin in Umbraco. It also support the default Umbraco user authentication at the same time if desired.Wayne's Financial Tracker: Track your finances with this simple to use tool.Weople: Weople is game developed in XNA by a team of students of the "Politecnico di Milano". Our group will participate with Weople to Imagine Cup 2011.WorldListening: This app is able to get news and blog from websites ,and read it with MS SAPI.WPF Diagramming: Tool for draw diagramsYakeen Network Applications Framework: This project is Network Application Server Simulator and Benchmark for modeling networks applications servers, I'm working on this project right now, any help will be appreciated.

  Read the article

• Compile PHP 5.3.2 with intl extension on Snow Leopard 10.6.3

  - by fsb

  Does anyone have some tips on compiling PHP's intl extension on PHP? I'm getting compile errors each way I try it and I've been googling for ages and getting nowhere. Any help greatly appreciated. When make gets to the huge gcc command to compile libphp5.bundle, I get the following error: Undefined symbols: "___gxx_personality_v0", referenced from: icu_4_2::MessageFormatAdapter::getArgTypeList(icu_4_2::MessageFormat const&, int&)in msgformat_helpers.o _umsg_parse_helper in msgformat_helpers.o _umsg_format_arg_count in msgformat_helpers.o _umsg_format_helper in msgformat_helpers.o CIE in msgformat_helpers.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [libs/libphp5.bundle] Error 1 My compile commands are: MACOSX_DEPLOYMENT_TARGET=10.6 CFLAGS="-arch x86_64 -g -Os -pipe -no-cpp-precomp" CCFLAGS="-arch x86_64 -g -Os -pipe" CXXFLAGS="-arch x86_64 -g -Os -pipe" LDFLAGS="-arch x86_64 -bind_at_load" export CFLAGS CXXFLAGS LDFLAGS CCFLAGS MACOSX_DEPLOYMENT_TARGET ./configure --prefix=/usr \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --sysconfdir=/private/etc \ --with-apxs2=/usr/sbin/apxs \ --enable-cli \ --with-config-file-path=/etc \ --with-libxml-dir=/usr \ --with-openssl=/usr \ --with-zlib=/usr \ --with-bz2=/usr \ --with-curl=/usr \ --with-gd \ --with-jpeg-dir=/src/jpeg/jpeg-local \ --with-png-dir=/usr/X11R6 \ --with-freetype-dir=/usr/X11R6 \ --with-xpm-dir=/usr/X11R6 \ --with-ldap=/usr \ --with-ldap-sasl=/usr \ --enable-mbstring \ --enable-mbregex \ --with-mysql=mysqlnd \ --with-mysqli=mysqlnd \ --with-pdo-mysql=mysqlnd \ --with-mysql-sock=/var/mysql/mysql.sock \ --with-iodbc=/usr \ --enable-shmop \ --with-snmp=/usr \ --enable-soap \ --enable-sockets \ --enable-sysvmsg \ --enable-sysvsem \ --enable-sysvshm \ --with-xmlrpc \ --with-iconv-dir=/usr \ --with-xsl=/usr \ --with-pcre-regex=/src/pcre/pcre-local/usr/local \ --with-pcre-dir=/src/pcre/pcre-local/usr/local \ --with-icu-dir=/usr/local \ --enable-intl export EXTRA_CFLAGS="-lresolv" make

  Read the article

• What's up with stat on Macos/Darwin? Or filesystems without names...

  - by Charles Stewart

  In response to a question I asked on SO, Give the mount point of a path, one respondant suggested using stat to get the device name associated with the volume of a given path. This works nicely on Linux, but gives crazy results on Macos 10.4. For my system, df and mount give: cas cas$ df Filesystem 512-blocks Used Avail Capacity Mounted on /dev/disk0s3 58342896 49924456 7906440 86% / devfs 194 194 0 100% /dev fdesc 2 2 0 100% /dev 1024 1024 0 100% /.vol automount -nsl [166] 0 0 0 100% /Network automount -fstab [170] 0 0 0 100% /automount/Servers automount -static [170] 0 0 0 100% /automount/static /dev/disk2s1 163577856 23225520 140352336 14% /Volumes/Snapshot /dev/disk2s2 409404102 5745938 383187960 1% /Volumes/Sparse cas cas$ mount /dev/disk0s3 on / (local, journaled) devfs on /dev (local) fdesc on /dev (union) on /.vol automount -nsl [166] on /Network (automounted) automount -fstab [170] on /automount/Servers (automounted) automount -static [170] on /automount/static (automounted) /dev/disk2s1 on /Volumes/Snapshot (local, nodev, nosuid, journaled) /dev/disk2s2 on /Volumes/Sparse (asynchronous, local, nodev, nosuid) Trying to get the devices from the mount points, though: cas cas$ df | grep -e/ | awk '{print $NF}' | while read line; do echo $line $(stat -f"%Sdr" $line); done / disk0s3r /dev ???r /dev ???r /.vol ???r /Network ???r /automount/Servers ???r /automount/static ???r /Volumes/Snapshot disk2s1r /Volumes/Sparse disk2s2r Here, I'm feeding each of the mount points scraped from df to stat, outputing the results of the "%Sdr" format string, which is supposed to be the device name: Cf. stat(1) man page: The special output specifier S may be used to indicate that the output, if applicable, should be in string format. May be used in combination with: ... dr Display actual device name. What's going on? Is it a bug in stat, or some Darwin VFS weirdness? Postscript Per Andrew McGregor, try passing "%Sd" to stat for more weirdness. It lists some apparently arbitrary subset of files from CWD...

  Read the article

• Seeking web-based FTP client for very large file upload

  - by Paul M. Nguyen

  I have looked around for these for some time... the limits imposed by the web server and/or the dynamic programming environment (e.g. PHP) are far too restrictive for the application I'm working on. We need to be able to move large graphics and video files to and from clients (ranging from tens of MB to a few GB in a single file). Plain FTP with a proper desktop client will do the trick, and we're hosting this in Amazon EC2 with EBS. User management will be done from the office via webmin. Users are chroot-jailed into their home dir by proftpd. net2ftp will work for many clients, but we often need to move single files that approach 1GB or exceed 2-3GB which is way out of the range of any http-based uploader. So we turn to Java or Flash - can they do it? From within the web browser establish an FTP connection and grab a huge file? There are licensed applets and such out there, but none seem convincing. Again, I'm looking for some code that can speak FTP and read (& write?) the local disk, that is delivered in a web browser, and can move single files of 2GB+. The reason for having a web-based interface to FTP is to skip the software installation step for our clients. I will consider proper desktop client software as long as it's "portable" and at least Win+Mac and can be easily configured by lay-man users in a hurry.

  Read the article

• How do I make XTerm not use bold?

  - by mike

  I like using XTerm, I like its default "fixed" font, and I like using terminal colors rather than having a monochromatic terminal. However, XTerm seems to insist on using a bold version of the font whenever it's displaying a bright color: I hate hate hate the bold version of the font, but I like the brightness. The man page seems to suggest that adding "XTerm.VT100.boldMode:false" to my ~/.Xresources would disable this "feature", but it doesn't seem to have any effect. I've had it in there for months, so it's not a rebooting issue. How can I force XTerm to always use the standard, non-bold version of the fixed font, even when it's displaying bright text? Edit: Some have suggested putting "XTerm*boldMode: false" in my ~/.Xresources. That didn't help either. I've confirmed that the changes have taken effect with xrdb, though: $ xrdb -query | grep boldMode XTerm*boldMode: false And if i run xprop and click an xterm, I get "WM_CLASS(STRING) = "xterm", "XTerm"" .. so i'm definitely running real xterms. BTW, this is just a plain-vanilla Ubuntu Intrepid box. If anyone else here is running the same, can you try running: echo -e '#\e[1m#' ...and let me know whether the # on the right has a black pixel in the middle like the one on the left does?

  Read the article

• "unrecognized options" while installing php

  - by user1692333

  I want to compile php 5.4.8 on my mac 10.8.2, but get some errors which cant solve by my self, so need your help. Firstly i get default php options with php -i | head, after it do this command ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --sysconfdir=/private/etc --with-apxs2=/usr/sbin/apxs --enable-cli --with-config-file-path=/etc --with-libxml-dir=/usr --with-openssl=/usr --with-kerberos=/usr --with-zlib=/usr --enable-bcmath --with-bz2=/usr --enable-calendar --disable-cgi --with-curl=/usr --enable-dba --enable-ndbm=/usr --enable-exif --enable-fpm --enable-ftp --with-gd --with-freetype-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-jpeg-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-png-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --enable-gd-native-ttf --with-icu-dir=/usr --with-iodbc=/usr --with-ldap=/usr --with-ldap-sasl=/usr --with-libedit=/usr --enable-mbstring --enable-mbregex --with-mysql=mysqlnd --with-mysqli=mysqlnd --without-pear --with-pdo-mysql=mysqlnd --with-mysql-sock=/var/mysql/mysql.sock --with-readline=/usr --enable-shmop --with-snmp=/usr --enable-soap --enable-sockets --enable-sqlite-utf8 --enable-suhosin --enable-sysvmsg --enable-sysvsem --enable-sysvshm --with-tidy --enable-wddx --with-xmlrpc --with-iconv-dir=/usr --with-xsl=/usr --enable-zend-multibyte --enable-zip --with-pcre-regex --with-pgsql=/usr --with-pdo-pgsql=/usr But get this error config.status: creating Makefile config.status: creating jconfig.h config.status: jconfig.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --enable-cli, --with-config-file-path, --with-libxml-dir, --with-openssl, --with-kerberos, --with-zlib, --enable-bcmath, --with-bz2, --enable-calendar, --disable-cgi, --with-curl, --enable-dba, --enable-ndbm, --enable-exif, --enable-fpm, --enable-ftp, --with-gd, --with-freetype-dir, --with-jpeg-dir, --with-png-dir, --enable-gd-native-ttf, --with-icu-dir, --with-iodbc, --with-ldap, --with-ldap-sasl, --with-libedit, --enable-mbstring, --enable-mbregex, --with-mysql, --with-mysqli, --without-pear, --with-pdo-mysql, --with-mysql-sock, --with-readline, --enable-shmop, --with-snmp, --enable-soap, --enable-sockets, --enable-sqlite-utf8, --enable-suhosin, --enable-sysvmsg, --enable-sysvsem, --enable-sysvshm, --with-tidy, --enable-wddx, --with-xmlrpc, --with-iconv-dir, --with-xsl, --enable-zend-multibyte, --enable-zip, --with-pcre-regex, --with-pgsql, --with-pdo-pgsql Maybe someone have some suggestions on this?

  Read the article

• cloning a kvm guest os to a vmdk file

  - by Bond

  I have a production environment where I am having 4 Guest OS running on a Ubuntu server which uses kvm. These OS are in an LVM based setup.I want these Virtual Machines to be in a vmdk format also.Where people would do experiments with these Virtual Machines so this in a vmware environment (or it can be Xen too) would be different from the kvm server.I would not have any control on that other environment so I want to give people vmdk images of these virtual machines. The production Virtual Machines will still keep running on kvm server but the VMs on which experiments would be done would be of type vmdk.(vmdk is a constraint) Here is output of lvscan ACTIVE '/dev/abcd/lvm1' [100.00 GiB] inherit ACTIVE '/dev/abcd/lvm2' [150.00 GiB] inherit ACTIVE '/dev/abcd/lvm3' [50.00 GiB] inherit ACTIVE '/dev/abcd/lvm4' [100.00 GiB] inherit I was reading man page of qemu-img and what I understand is I need to first create a qcow image file which I need to populate and then convert that to a vmdk file. Is that understanding correct? Now suppose /dev/abcd/lvm4 is the virtual machine with which I am going to start this experiment.I can shutdown the production VMs for some time to do this. So is the following way correct to go on server 1 (where kvm is running) qemu-img convert -c -f raw -O vmdk /dev/abcd/lvm4 /backup/lvm4.img or it will affect the lvm4 on kvm server 1. I do not want the VM running on original server to at all loose its any of the content but also have a vmdk file for each of the Guest OS on kvm. Before I proceed with any of the above things on the production machine I just want to make sure that I am doing the correct thing so I asking here.

  Read the article

• Postfix able to receive email but not able to send it

  - by c0mrade

  I had postfix running on my machine(comes with centos minimal), but today I configured it to use my domain for the sake of example this is my domain name example.com . Here is my config : alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 header_checks = regexp:/etc/postfix/header_checks html_directory = no inet_interfaces = all inet_protocols = ipv4 mail_owner = postfix mailbox_size_limit = 1073741824 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 10485760 mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = example.com myhostname = mail.example.com mynetworks = 127.0.0.0/8 mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relayhost = smtp.$mydomain sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_banner = $myhostname ESMTP $mail_name smtpd_client_restrictions = permit_mynetworks,reject_unknown_client,permit smtpd_recipient_restrictions = permit_mynetworks,permit_auth_destination,permit_sasl_authenticated,reject unknown_local_recipient_reject_code = 550 I need one email account to be able to send emails (password retrievals etc.). I read today somewhere that if you create unix account postfix will recognize it as email address so if your account username was ant your email would be [email protected]. So I tested that and tried to send email to [email protected] and I successfully received mail. When I try to send the email with ant task script, I'm not able to connect : Failed messages: javax.mail.MessagingException: Could not connect to SMTP host: mail.example.com, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect What am I missing here? Edit I'm able to telnet to localhost : Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 mail.example.com ESMTP Postfix

  Read the article

• How do hdparm's -S and -B options interact?

  - by user697683

  These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

  Read the article

• BackupPC - why does it use rsync --sender --server ... ?

  - by Jakobud

  I'm in the process of experimenting with BackupPC on a CentOS 5.5 server. I have everything pretty much setup with default values. I tried setting up a basic backup for a host's /www directory. The backup fails with the following errors: full backup started for directory /www Running: /usr/bin/ssh -q -x -l root target /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Xfer PIDs are now 30395 Read EOF: Connection reset by peer Tried again: got 0 bytes Done: 0 files, 0 bytes Got fatal error during xfer (Unable to read 4 bytes) Backup aborted (Unable to read 4 bytes) Not saving this as a partial backup since it has fewer files than the prior one (got 0 and 0 files versus 0) First of all, yes I have my ssh keys setup to allow me to ssh to the target server without requiring a password. In the process of troubleshooting, I tried the above ssh command directly from the command line, and it hangs. Looking at the end of the debug messages for SSH I get: debug1: Sending subsystem: /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Request for subsystem '/usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/' failed on channel 0 Next I started looking at the rsync flags. I did not recognize --server and --sender. Looking at the rsync man pages, sure enough, I don't see anything about --server or --sender in there. What are those in there for? Looking at the BackupPC config I have this: RsyncClientPath = /usr/bin/rsync RsyncClientCmd = $sshPath -q -x -l root $host $rsyncPath $argList+ And for the arguments, I have the following listed: --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive Notice there is no --server, --sender or --ignore-times. Why are these things getting added in? Is this part of the problem?

  Read the article

• Postfix a lot of relay acces denied errors in maillog

  - by tester3

  I'm on Centos 6.5 with Postfix/Dovecot and some virtual domains. Postfix works fine, but I've got a lot of messages like this "NOQUEUE: reject: RCPT from 1-160-127-12.dynamic.hinet.net[1.160.127.12]: 454 4.7.1 : Relay access denied; from= to= proto=SMTP" in my maillog. I've tried to close port 25 with iptables, when I do so - I got no such messages, but my mail system starts work incorrectly and can't receive mail from other hosts. Please help! My postconf -n: alias_database = $alias_maps alias_maps = hash:/etc/postfix/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = ipv4 mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 20971520 mydestination = localhost.$mydomain, localhost newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = * sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_cert_file = /etc/pki/tls/certs/example.com.crt smtp_tls_key_file = /etc/pki/tls/private/example.com.key smtp_tls_loglevel = 1 smtp_tls_session_cache_database = btree:/etc/postfix/smtp_tls_session_cache smtp_tls_session_cache_timeout = 3600s smtp_use_tls = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = example.com smtpd_sasl_path = /var/run/dovecot/auth-client smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/pki/tls/certs/example.com.crt smtpd_tls_key_file = /etc/pki/tls/private/example.com.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:/etc/postfix/smtpd_tls_session_cache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/vmail_aliases virtual_gid_maps = static:2222 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = hash:/etc/postfix/vmail_domains virtual_mailbox_maps = hash:/etc/postfix/vmail_mailbox virtual_minimum_uid = 2222 virtual_transport = virtual virtual_uid_maps = static:2222 Please help! Will attach master.cf or anything other if needed.

  Read the article

• postfix is unable to send emails to external domains

  - by BoCode

  Whenever i try to send an email from my server, i get the following error: Nov 13 06:37:21 xyz postfix/smtpd[6730]:connect from unknown[a.b.c.d] Nov 13 06:37:21 xyz postfix/smtp[6729]: warning: host X.com[x.y.z.d]:25 greeted me with my own hostname xyz.biz Nov 13 06:37:21 xyz postfix/smtp[6729]: warning: host X.com[x.y.z.d]:25 replied to HELO/EHLO with my own hostname xyz.biz Nov 13 06:37:21 xyz postfix/smtp[6729]: 2017F1B00C54: to=<[email protected]>, relay=X.com[x.y.z.d]:25, delay=0.98, delays=0.17/0/0.81/0, dsn=5.4.6, status=bounced (mail for X.com loops back to myself) this is the output of postconf -n: address_verify_poll_delay = 1s alias_database = hash:/etc/aliases alias_maps = body_checks_size_limit = 40980000 command_directory = /usr/sbin config_directory = /etc/postfix connection_cache_ttl_limit = 300000s daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 1 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 default_delivery_slot_cost = 2 default_destination_concurrency_limit = 10 default_destination_recipient_limit = 1 default_minimum_delivery_slots = 3 default_process_limit = 10000 default_recipient_refill_delay = 1s default_recipient_refill_limit = 10 disable_dns_lookups = yes enable_original_recipient = no hash_queue_depth = 2 home_mailbox = Maildir/ html_directory = no in_flow_delay = 0 inet_interfaces = all inet_protocols = ipv4 initial_destination_concurrency = 100 local_header_rewrite_clients = mail_owner = postfix mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man master_service_disable = milter_default_action = accept milter_protocol = 6 mydestination = $myhostname, localhost.localdomain, localhost, $mydomain mydomain = xyz.biz myhostname = xyz.biz mynetworks = 168.100.189.0/28, 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases non_smtpd_milters = $smtpd_milters qmgr_message_active_limit = 500 qmgr_message_recipient_limit = 500 qmgr_message_recipient_minimum = 1 queue_directory = /var/spool/postfix queue_run_delay = 300s readme_directory = /usr/share/doc/postfix.20.10.2/README_FILE receive_override_options = no_header_body_checks sample_directory = /usr/share/doc/postfix.2.10.2/examples sendmail_path = /usr/sbin/sendmail service_throttle_time = 1s setgid_group = postdrop smtp_always_send_ehlo = no smtp_connect_timeout = 1s smtp_connection_cache_time_limit = 30000s smtp_connection_reuse_time_limit = 30000s smtp_delivery_slot_cost = 2 smtp_destination_concurrency_limit = 10000 smtp_destination_rate_delay = 0s smtp_destination_recipient_limit = 1 smtp_minimum_delivery_slots = 1 smtp_recipient_refill_delay = 1s smtp_recipient_refill_limit = 1000 smtpd_client_connection_count_limit = 200 smtpd_client_connection_rate_limit = 0 smtpd_client_message_rate_limit = 100000 smtpd_client_new_tls_session_rate_limit = 0 smtpd_client_recipient_rate_limit = 0 smtpd_delay_open_until_valid_rcpt = no smtpd_delay_reject = no smtpd_discard_ehlo_keywords = silent-discard, dsn smtpd_milters = inet:127.0.0.1:8891 smtpd_peername_lookup = no unknown_local_recipient_reject_code = 550 what could be the issue?

  Read the article

• CodePlex Daily Summary for Wednesday, June 08, 2011

  CodePlex Daily Summary for Wednesday, June 08, 2011Popular ReleasesHTML-IDEx: HTML-IDEx .15 ALPHA: This release fixes line counting a little bit and adds the masshighlight() sub, which highlights pasted and inserted code.AutoLoL: AutoLoL v2.0.3: - Improved summoner spells are now displayed - Fixed some of the startup errors people got - Double clicking an item selects it - Some usability changes that make using AutoLoL just a little easier - Bug fixesVidCoder: 0.9.2: Updated to HandBrake 4024svn. This fixes problems with mpeg2 sources: corrupted previews, incorrect progress indicators and encodes that incorrectly report as failed. Fixed a problem that prevented target sizes above 2048 MB.SharePoint Search XSL Samples: SharePoint 2010 Samples: I have updated some of the samples from the 2007 release. These all work in SharePoint 2010. I removed the Pivot on File Extension because SharePoint 2010 search has refiners that perform the same function.SCCM Client Actions Tool: SCCM Client Actions Tool v0.5: SCCM Client Actions Tool v0.5 is currently the most stable version and includes all of the functionality requested so far. It comes as a ZIP file that contains three files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA on Windows XP. Cmdkey.exe is natively available starting from Windows Vista. Config.ini – A configuration file for default settings. This file is...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta5: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta5 ?????????? ???? ?? ???????? ???"????????"?? ????????????? ????????/???? ?? ???"????"??? ?? ??????????? ?? ?? ??????????? ?? ?????????????????? ??????????????????? ???????????????? ????????????Discussions???????? ????AcDown??????????????Media Companion: MC 3.405-3 latest patch: -1 Added ability to choose to rename invalid nfos to info -2 Fix for multipart episodes not showing / Fix to skip invalid nfo's during rebuild -3 If movie plot empty use outline This file is just the mediacompanion.exe It has the cutting edge bug fixes as they are fixed during the week. The patch file number will be referred to in the relevant issue tracker comment. For the latest full program, you need to download the relevant weekly plus the patch.WatchersNET.TagCloud: WatchersNET.TagCloud 02.00.01: changes Module Packages are now generated with MSBuild Added Cancel Edit Button to Cancel an Custom Tag Edit Fixed Issue #14 editing of custom tags Fixed Issue with Flash File and Google BotVFPX: GoFish 4 Beta 1: Current beta is Build 144 (released 2011-06-07 ) See the GoFish4 info page for details and video link: http://vfpx.codeplex.com/wikipage?title=GoFishOnTopReplica: Release 3.3.2: Incremental update over 3.3 and 3.3.1. Added Polish language translation (thanks to Jan Romanczyk). Added German language translation (thanks to Eric Hoffmann). Fixed some localization issues.SQL Compact Query Analyzer: Build 0.3.0.0: Beta build of SQL Compact Query Analyzer Features: - Execute SQL Queries against a SQL Server Compact Edition database - Easily edit the contents of the database - Supports SQLCE 3.1, 3.5 and 4.0 Prerequisites: - .NET Framework 4.0ShowUI: Write-UI -in PowerShell: ShowUI: ShowUI is a PowerShell module to help you write rich user interfaces in script.Babylon Toolkit: Babylon.Toolkit v1.0.4: Note about samples: In order to run samples, you need to configure visual studio to run them as an "Out-of-browser application". in order to do that, go to the property page of a sample project, go to the Debug tab, and check the "Out-of-browser application" radio. New features : New Effects BasicEffect3Lights (3 dir lights instead of 1 position light) CartoonEffect (work in progress) SkinnedEffect (with normal and specular map support) SplattingEffect (for multi-texturing with smooth ...SizeOnDisk: 1.0.8.2: With installerTerrariViewer: TerrariViewer v2.5: Added new items associated with Terraria v1.0.3 to the character editor. Fixed multiple bugs with Piggy Bank EditorySterling NoSQL OODB for .NET 4.0, Silverlight 4 and 5, and Windows Phone 7: Sterling OODB v1.5: Welcome to the Sterling 1.5 RTM. This version is backwards compatible without modification to the 1.4 beta. For the 1.0, you will need to upgrade your database. Please see this discussion for details. You must modify your 1.0 code for persistence. The 1.5 version defaults to an in-memory driver. To save to isolated storage or use one of the new mechanisms, see the available drivers and pass an instance of the appropriate one to your database (different databases may use different drivers). ...Grammar and Spell Checking Plugin for Windows Live Writer: Grammar Checker Plugin v1.0: First version of the grammar checker plugin for Windows Live Writer. You can show your appreciation for this plugin and support further development by donating via PayPal. Any amount will be appreciated. Thank you. Donatepatterns & practices: Project Silk: Project Silk Community Drop 10 - June 3, 2011: Changes from previous drop: Many code changes: please see the readme.mht for details. New "Application Notifications" chapter. Updated "Server-Side Implementation" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To install and run the reference implementation, you must perform the fol...Claims Based Identity & Access Control Guide: Release Candidate: Highlights of this release This is the release candidate drop of the new "Claims Identity Guide" edition. In this release you will find: All code samples, including all ACS v2: ACS as a Federation Provider - Showing authentication with LiveID, Google, etc. ACS as a FP with Multiple Business Partners. ACS and REST endpoints. Using a WP7 client with REST endpoints. All ACS specific chapters. Two new chapters on SharePoint (SSO and Federation) All revised v1 chapters We are now ...Terraria Map Generator: TerrariaMapTool 1.0.0.4 Beta: 1) Fixed the generated map.html file so that the file:/// is included in the base path. 2) Added the ability to use parallelization during generation. This will cause the program to use as many threads as there are physical cores. 3) Fixed some background overdraw.New ProjectsAmur: Amur is a programming language project that allows the team members to explore functional programming language design. The compiler will target .NET and, for now, be developed in C#.Arche: Arche makes it easier for devlopers to architecture base with code generators. It's developed in C#. Avignon: A WPF version of the board game Carcassonne.Code Exercises in C#: A few c# files to demonstrate coding abilityCows And Bulls Project: Per tutti gli sviluppatori dotNET Che vogliono ritrovarsi per parlare di qualsiasi metodologia di sviluppo Agile Il Cows And Bulls Project È un progetto CodePlex Che si pone l'obiettivo di promuovere la discussione e lo scambio di esperienze sullo sviluppo Agile del software A differenza di altri progetti open source Il nostro progetto non utilizza la comunità per migliorare il codice sorgente ma usa il codice sorgente per migliorare una comunità Grazie molte a Stefania Menocci che h...CRM 2011 Workflow Utilities: This project includes custom workflow activities for CRM 2011 which provide additional workflow steps for actions such as "delete" and "share" within the CRM Process designer. These activities can be used in both workflows and dialogs but are not supported in CRM Online. Dot Net Reflector: OPEN SOURCE AND FREE Reflector. Let it be said right now. Dot Net Reflector forever will be free and here on codeplex.Exemplo de TFS do Papo: Projeto para testar conexao do TFS com Windows Phone 7Extended WCF Discovery: Extend the WCF discovery to support: 1. Service publish its real service address - such as external IP when service is behind NAT 2. Client discovery over any network topology (behind NAT) Also (in the roadmap): Binding discovery-clients will receive the binding from the server.FileProtector: This will make it easy for any user to protect their personal files. It's developed completely using C#Fingertip detection via OpenNI: "Fingertip Detection" prject is intended to give usual PC user availability to control PC unsing only hand and finger gestures. Project is built on .NET framework. Used technologies : 1. OpenNI 2. NITE 3. EmguCVHomeData: Stores and displays data from the household.Informicus LibraryHub: 4VasiliyLifeHelper: lifehelperMaxZhang.EasyEntities: EasyEntitiesMedianamik: MedianamikMethodWorx CMS: Open Source .NET CMS for fully hosted solutions, or integration into ASP.NET and ASP.NET MVC projects. Microsoft Tag API for BlackBerry: Microsoft Tag is a compact, yet, data rich and user friendly tag system. This API allows for accessing and using Tags.MVVM Demo: A MVVM demoMyReportSL: My Report SiverlightNSS College Website: An effort to develop an open source website for NSS College, Rajakumari with the contributions from its current students and alumni...Oldies: Deletes or moves old files from current folderPhaLinks a Modern Native Lisp: PhaLinks is a modern lips with a custom VM that runs on PyPy. ProdUI: ProdUI is designed to be used when a GUI needs to be manipulated automatically (Prodded), either for testing, or to perform human UI interactions for data entry on systems that don't allow back-end access. The ProdUI toolset is developed in C#, using the UI Automation API and failing back on Win32 calls if that fails. Every attempt is made to verify that the action was actually performed, and proper notification if not.The system is designed to allow for single "off the cuff" prods, as well ...ResourceManager: A tool to allow relationships between various resources to be established and to show the effects of altering one resource on others. This is initially intended for use of keeping track of servers and licenses used by applications, but I'm hoping to leave it open to expansion.seriesCounter: SeriesCounter makes it easier for people that watch series to keep track at what episode of a series they are. You'll no longer have to remember it yourself. It's developed in C#.Shai Chi Android: Shai Chi AndroidSistemaControleMultas_LPUNICAP: Nada a declararSmarx Role: Smarx Role is a Windows Azure role that supports publishing web applications written in Node.js, Ruby, and Python. Apps are published/synchronized via Git or blob storage, allowing nearly instantaneous changes to published applications. It automatically pulls in dependent modules using each language's package manager (npm, Gem, or pip).Tetris3D: try to complete a 3D tetris cloneTrackMania WebServices SDK .NET: TrackMania WebServices SDK .NET is a .NET 4 library which provide every tools to get statistics from TrackMania ForeverTV Program Analyst: A TV program analyzing software, based on specific program log from tv stations. VB.net Roguelike: This is an attempt to make a Roguelike in VB.net. This is in it's very early stages, and any help would be appreciated! Definition of Roguelike: (from Wikipedia) The roguelike is a sub-genre of role-playing video games, characterized by randomization for replayability, permanent death, and turn-based movement. Most roguelikes feature ASCII graphics, with newer ones increasingly offering tile-based graphics. Games are typically dungeon crawls, with many monsters, items, and environmental f...Wbfs Engine: Provides a simple and easy to use library for accessing games and wbfs partitions with .NET

  Read the article

• Linux Mounting Problem

  - by Sam

  I have an Iomega Network Attached Storage device on my Windows network. I am trying to use a clonezilla live USB flash drive to backup my netbook to my Iomega Network Attached Storage device. The clonezilla USB flash drive runs linux. I'm having trouble getting the Network Attached Storage unit to mount using the following command: mount -t cifs -o username="myUsername" //192.168.1.100/backup /home/partimg The response from linux is: [134.730738] CIFS VFS: cifs_mount failed w/return code = -6 retrying with upper case share name [134.788461] CIFS VFS: cifs_mount failed w/return code = -6 mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I also tried adding the following to my username: username="myUsername,domain=workgroup" but that did not change the error. I am able to ping the network attached storage unit from linux on my netbook. I also booted from a Slax Live USB Flash Drive and Slax auto-mounted my network attached storage unit via Samba. Unfortunately, I don't believe that I can run clonezilla from inside the Slax installation. Does anyone have any insight about what is wrong with my mount statement? Or is there something peculiar about Iomega drives which makes this impossible?

  Read the article

• Postfix won't pipe to PHP file through aliases file

  - by jfreak53

  I'm trying to pipe from postfix to a command. According to Postfix logs it worked, but when I check the command it didn't. This is a fresh postfix install. This is my alias file: # See man 5 aliases for format postmaster: root support: "| /usr/bin/php -q /var/www/pipe/pipe.php" I run sendmail [email protected] then type it and then on a separate line type . and it goes. I check the postfix log /var/log/mail.log and this is what it states: Nov 2 15:32:33 server3 postfix/local[13284]: 42C429E0B5: to=<[email protected]>, relay=local, delay=156, delays=156/0.01/0/0.05, dsn=2.0.0, status=sent (delivered to command: /usr/bin/php -q /var/www/pipe/pipe.php) So according to that it worked, but it doesn't. If I run echo 'text' | /usr/bin/php -q /var/www/pipe/pipe.php it does work just fine. Any ideas what I did wrong? I know piping is working, I originally checked it by running that command above WITHOUT the quotes, so just support: | /usr/bin/php -q /var/www/pipe/pipe.php What it did there was append my email header and all to the file pipe.php. So I know postfix was piping it, but when I put in the quotes it says it's going but it's not according to my script.

  Read the article

• How to edit known_hosts when several hosts share the same IP and DNS name?

  - by Frédéric Grosshans

  I regularly ssh into a computer which is a dual-boot OS X / Linux computer. The two OS instance do not share the same host key, so they can be seen as two host sharing the same IP and DNS. Let's say the IP is 192.168.0.9, and the names are hostname and hostname.domainname As far as I understood, the solution to be able to connect to the two host is to add them both to the ~/.ssh/know_hosts file. However, it is easier said than done, because the file is hashed, and has probably several entries per host (192.168.0.9, hostname, hostname.domainname). As a consequence, I have the following warning Warning: the ECDSA host key for 'hostname' differs from the key for the IP address '192.168.0.9' Is there an easy way to edit the known_hosts file, while keeping the hashes. For example, how can I find the lines corresponding to a given hostame? How can I generate the hashes for some known hosts? The ideal solution would allow me to connect to seamlessly to this computer with ssh, no matter whether I call it 192.168.0.9, hostname or hostname.domainname, nor if it uses its Linux hostkey or its OSX hostkey. However, I still want to receive a warning if there is a real man-in-the middle attack, i.e. if another key than these two is used.

  Read the article

• Login with Enterprise Principal Name using sssd AD backend in Ubuntu 14.04 LTS

  - by Vinícius Ferrão

  I’m running sssd version 1.11 with the AD backend in Ubuntu 14.04 LTS (1.11.5-1ubuntu3) to authenticate users from Active Directory running on Windows Server 2012 R2, and I’m trying to achieve logins with the User Principal Name for all users of the domain. But the UPN are always Enterprise Principal Names. Let-me illustrate the problem with my user account: Domain: local.example.com sAMAccountName: ferrao UPN: [email protected] (there’s no local in the UPN) I can successfully login with the sAMAccountName atribute, which is fine, but I can’t login with [email protected] which is my UPN. The optimum solution for me is to allow logins from sAMAccountName and the UPN (User Principal Name). If’s not possible, the UPN should be the right way instead of the sAMAccountName. Another annoyance is the homedir pattern with those options in sssd.conf: default_shell = /bin/bash fallback_homedir = /home/%d/%u What I would like to achieve is separated home directories from the EPN. For example: /home/example.com/user /home/whatever.example.com/user But with this pattern I can’t map the way I would like to do. I’ve looked through man pages and was unable to find any answers for this issues. Thanks,

  Read the article

• Shrink a Volume Group in LVM / Linux in order to install Windows on the freed space

  - by Stephan Kristyn

  I have a Volume Group with Unused space. This 40Gig should become an entidy in order to install Microsoft windows 7 on it. I do not have extra space on the drive - that is why I want to shrink the VG! LVG berta resides on sda2 and consists of lv_root lv_swap unused_space I want it to become lv_root lv_swap and have a seperate entidy made out of unused_space. Microsoft Windows 7 has to get installed on this entidy. I do not understand why Linux made simple things complicated. I utterly hate LVM and think its absolute bollocks. Useful Sources: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-system-config-lvm.html Edit: I found the answer. The necessary steps depict how complicated LVM really is. In my opinion it is best to avoiding LVM until pvresize matures as promised in its man pages. Answer: http://fedorasolved.org/Members/zcat/shrink-lvm-for-new-partition If you run into problems when you want to remove lvswap even if in resuce mode, then try swapoff /dev/vg_1/lv_swap lvchange -an /dev/vg_1/lv_swap

  Read the article

• postfix (for sending mail only) multiple domain setup

  - by seanl

  I have the following problem, I have a Centos 5.4 VPS hosting a few nginx sites (some static, some cakephp), I would like to be able to send email from each sites contact page through postfix to my google apps hosted email (different accounts for each site) so that apps can then send out an auto email to the person filling in the contact form etc I have a bare-bones postfix installation with the following added into the main.cf config file. from using this guide virtual_alias_domains = hash:/etc/postfix/virtual_alias_domains virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps (both of these files have been converted into db files using postmap) I have configured DNS correctly for each site and setup SPF records. (I'm aware R-DNS will still reference my actual hostname not the domain name and cause a possible spam issue but one thing at a time) I can telnet localhost and the helo localhost so that I can send a command line email from an address in the virtual_alias_domains to an email in the virtual_alias_maps file which seems sends without giving an error but it is sending to my local linux account not the email address specified. my question is am i approching this the wrong way in terms of the virtual alias mapping or is this even possible to do in the manner im trying. Any help is greatly appreciated thanks. my postconf -n outlook looks like this alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no inet_interfaces = localhost mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost myhostname = myactual hostname mynetworks = 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 virtual_alias_domains = hash:/etc/postfix/virtual_alias_domains virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps

  Read the article

• Ubuntu Pound Reverse Proxy Load Balancing Based off active server load?

  - by Andrew

  I have Pound installed on a loadbalancer. It seems to work okay, except that it randomly assigns the backend server to forward the request to. I've put 1 backend machine under so much load that it went into using swap, and I can't even ssh into it to test this scenareo. I would like the loadbalancer to realize that the machine is overloaded, and send it to a different backend machine. However it doesn't. I've read the man page and it seems like the directive "DynScale 1" is what would monitor this, but it still redirects to the overloaded server. I've also put in "HAport 22" to the backend figuring since I can't ssh in, neither could the loadbalancer and it would consider the backend server dead until it gets rid of the load and responds, but that didn't help either. If anyone could help with this, I'd appreciate it. My current config is below. ###################################################################### ## global options: User "www-data" Group "www-data" #RootJail "/chroot/pound" ## Logging: (goes to syslog by default) ## 0 no logging ## 1 normal ## 2 extended ## 3 Apache-style (common log format) LogLevel 3 ## check backend every X secs: Alive 5 DynScale 1 Client 1200 TimeOut 1500 # poundctl control socket Control "/var/run/pound/poundctl.socket" ###################################################################### ## listen, redirect and ... to: ## redirect all requests on port 80 to SSL ListenHTTP Address 192.168.1.XX Port 80 Service Redirect "https://xxx.com/" End End ListenHTTPS Address 192.168.1.XX Port 443 Cert "/files/www.xxx.com.pem" Service BackEnd Address 192.168.1.1 Port 80 HAport 22 End BackEnd Address 192.168.1.2 Port 80 HAport 22 End End End

  Read the article

• Auto-rebuild RAID6 with MDADM

  - by user65632

  Hello everybody, i'm new in this forum, and because I see that a lot of people get helped here, i'll ask my question here! I have a openSUSE 11.3 Linux computer with 5 disks of 1TB (WD enterprise disks) in it. with mdadm I configured an RAID6 device. Now, after a lot of thorough testing, i've noticed that when the computer goes down unsuspectedly it could happen (1 time out of 10) that while booting, the md0 device isn't recognised, and then the machine goes in "recovery mode", which means that i have to 'CTRL + C' it so it can boot to openSUSE. Once in openSUSE i have to readd the drive manually with 'mdadm /dev/md0 --add /dev/sdX'. After this everything works back fine (after resynching). So my question is: Is there a way to auto-rebuild the RAID6 device when there are problems? and how can I stop this "recovery mode" from happening. Because the computer will be in a place I can't go to, to connect a keyboard, 'CTRL + C' it just to get in openSUSE. If you could help me, I would be a very very very! happy man! :-) thanks in advance! Mikhail

  Read the article

• Iptables: "-p udp --state ESTABLISHED"

  - by chris_l

  Hi, let's look at these two iptables rules which are often used to allow outgoing DNS: iptables -A OUTPUT -p udp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -p udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT My question is: How exactly should I understand the ESTABLISHED state in UDP? UDP is stateless. Here is my intuition - I'd like to know, if or where this is incorrect: The man page tells me this: state This module, when combined with connection tracking, allows access to the connection tracking state for this packet. --state ... So, iptables basically remembers the port number that was used for the outgoing packet (what else could it remember for a UDP packet?), and then allows the first incoming packet that is sent back within a short timeframe? An attacker would have to guess the port number (would that really be too hard?) About avoiding conflicts: The kernel keeps track of which ports are blocked (either by other services, or by previous outgoing UDP packets), so that these ports will not be used for new outgoing DNS packets within the timeframe? (What would happen, if I accidentally tried to start a service on that port within the timeframe - would that attempt be denied/blocked?) Please find all errors in the above text :-) Thanks, Chris

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >