Search Results

Search found 9044 results on 362 pages for 'bad sector'.

Page 168/362 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• excel 2010 format and input issue

  - by Craig Gunn

  I have completed a very complex Excel spreadsheet with a lot of equations, except ... I forgot to include September I have Jan through Dec, all the months, except the calculations for September. Of course all the equations are currently perfect for the data that's here. How do I add a whole new column without ruining the previous equations? PS: tomorrow is my holidays and I have to go to work to finish this table, so bad. would really appreciate some kind expertise :) cheers craig.

  Read the article

• BES 5.0 and MAPI calls to exchange system

  - by nysingh

  We have been using BES 4.1(5) for a while now and it has been a resource hog on exchange due to high number of MAPI calls. I have heard that BES 5.0 is even worse. the comparison i heard is that BES 4.1 is makes MAPI calls equal to 5 outlook clients per BB user and BES 5.0 makes MAPI calls equal to 10 outlook clients per BB user. can someone confirm if it is true? is BES 5.0 is really that bad in MAPI calls and for exchange performance. ? thanks

  Read the article

• How do I get started with Chef?

  - by Brad Wright

  The chef documentation is pretty bad. And Google isn't helping me. Can anyone point me at a decent article or something that would help me get started? My specific issues are: How do I get a client to read my configuration? chef-solo seems like the best start (I don't want to run an OpenID server or Merb) How do I configure Apache to serve Django? I already know how to do this via regular server configuration, but I figure an example Chef recipe would be a good start;

  Read the article

• VPN Network intermittantly fails to provide internet: What could be possible causes

  - by Jake M

  We have a small office with our own VPN setup. We occasionally experience failures in our internet connection where we cannot access the internet. Most of the time the internet connection will resume by itself(without me doing anything) after a period of time(10 mins). Would you be able to suggest possible causes of the connection failure so I can then go and run some tests? Our network architecture is like so: A 'Billion' brand router that is connected to the internet via phone cable and then connected to our Cisco Switch A Cisco Switch/Bus which is connected to all our office nodes, our external harddrive and also to our router as stated above. All connections are via ethernet cable A series of work computers(nodes) connected via ethernet cable to the Cisco switch. Our ISP is TPG Australia We have a Virtual Private Network All the ethernet cables are about 3 years old Do you think that the causes of our intermittant connection problems could be due to the following: Data collisions in the ethernet cables Old/Faulty ethernet cables Our ISP has bad service Can you think of any other causes of the problem?

  Read the article

• Program for drawing with pen tablet, like Salman Khan's one

  - by Halst

  I do a lot of sketching with my pen-tablet. I use Microsoft Paint in Windows 7, and it is just perfect except for bad anti-aliasing. I found some videos of Salman Khan, where his sketching is really smooth and anti-aliased. Do you know what program he might use? You can see a bit of its interface here: http://www.khanacademy.org/press/chronicle.HTML and some more: http://www.khanacademy.org/ http://khanexercises.appspot.com/video?v=GW8ZPjGlk24 Else, you can recommend me something else. I hope to find something like Microsoft Paint in Windows 7, but anti-aliased, or whatever.

  Read the article

• High Memory Utilization on weblogic

  - by Anup

  My Weblogic App Server shows high Memory Utization. The application seems to perform good without any memeory issues. Now that my traffix is going to increase i am worried about the memory and have a feeling things could go bad and need to take action now and i am confused as to should i increase The JVM memory on the weblogic instances which means adding more physical memory or should i increase the number of managed instances in the cluster. Would like to understand what does having high memory utilization mean and the advantage and disadvantages of adding JVM memory and adding managed instances. Thanks

  Read the article

• Changing an MSSQL clustered index field from containing "random" GUIDs to sequential GUIDs - how wil

  - by Eyvind

  We have an MSSQL database in which all the primary keys are GUIDs (uniqueidentifiers). The GUIDs are produced on the client (in C#), and we are considering changing the client to generate sequential (comb) GUIDs instead of just using Guid.NewGuid(), to improve db performance. If we do this, how will this affect installations that already have data with "random" GUIDs as clustered PKs? Can anything be done (short of changing all the PK values) to rebuild the indexes to avoid further fragmentation and bad insert performance? Please give explicit and detailed answers if you can; I am a C# developer at heart and not all too familiar with all the intricacies of SQL Server. Thanks!

  Read the article

• Is Mac OS X open source?

  - by hasen j

  I learned recently (on superuser) that Mac OS X uses the bash shell. I also know that OS X has a UNIX core. I was searching for information about OS X and Open Source on google, but what I found was this site: http://www.opensource.apple.com/ Which seems to include the source code for OS X. For instance, one of the links reads: Mac OS X 10.5.7 Source So, is OS X open source? There's an Apple Public Source License, but I'm bad at understanding legalese. Update Extra/Bonus question: Besides the kernel, What about the various other pieces? The X server? Window Manager? File explorer? etc. What's open source and what's not?

  Read the article

• CENTOS: unsupported dictionary type: sqlite in POSTFIX

  - by Ferdinand

  Oct 30 09:24:15 postfix postfix/smtpd[1622]: fatal: unsupported dictionary type: sqlite Oct 30 09:24:16 postfix postfix/master[1165]: warning: process /usr/libexec/postfix/smtpd pid 1622 exit status 1 Oct 30 09:24:16 postfix postfix/master[1165]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling I'm trying to use sqlite with postfix, but I get that error. I'm using CENTOS 6.4 x64. I have sqlite and sqlite-devel installed too. I'm assuming postfix from BASE (CentOS repo) comes without sqlite support? I've been not able to recompile with sqlite support using this: http://www.postfix.org/SQLITE_README.html Is there another way to get it to work?

  Read the article

• Can't find onboard NIC with windows server 2008

  - by Sanarothe

  Hi. I'm trying to setup a windows server, but I can't seem to get it to install ethernet drivers :( motherboard is ms-6743 chipset 82865g/pe/p(intel) The MSI drivers specifically for this motherboard are bad links. Not surprising... MSI is rarely helpful. Sisoft Sandra doesn't see any network devices, and all of my leads to drivers have reported that there is no network adapter to install a driver for. The light is ON on the mobo, the onboard setting in bios is ON and the computer worked just fine with a standard install of windows 7 about a month ago. I don't know what to do :(

  Read the article

• Practical RAID Performance?

  - by wag2639

  I've always thought the following to be a general rule of thumb for RAID: RAID 0: Best performance for READ and WRITE from stripping, greatest risk RAID 1: Redundant, decent for READ (I believe it can read from different parts of a file from different hard drives), not the best for WRITE RAID 0+1 (01): combines redundancy of RAID 1 with performance of RAID 0 RAID 1+0 (10): slightly better version of RAID 0+1 RAID 5: good READ performance, bad WRITE performance, redundant IS THIS ASSUMPTION CORRECT? (and how do they compare to a JBOD setup for R/W IO performance) Are certain practical RAID setups better for different applications: gaming, video editing, database (Acccess or SQL)? I was thinking about hard disk drives but does this apply to solid state drives as well?

  Read the article

• Are SANs unreliable?

  - by chaos

  So at the place where I wear one of my various hats, this one representing a development rather than admin role, there's been an initiative to move to SANs. So far, I have been spectacularly unimpressed. First it was this behavior where, when MySQL databases are on the SAN, the first few tables that anything tries to hit after the system boots come up as nonexistent and MySQL has to be restarted before it realizes they're actually there. Then today, on multiple systems (including the primary SVN repository, ever-so-wonderfully) we get SAN mounts spewing IO errors and the filesystems going into read-only, which is the kind of behavior I expect from directly mounted naked disks, not fault-tolerant managed storage. Right now, I'm at the point where if I were putting together a project and somebody said "hey we should use SANs", my response would be "GTFO". So basically I want to know whether my experience is typical or even common, or whether I'm having some kind of freakishly bad luck with SANs. The systems these SANs are attached to are all CentOS machines, if that's relevant.

  Read the article

• Fix superblock size after dd?

  - by TreyK

  I've recently installed Linux Mint 11, and somehow my partition table ended up so that both it and the unallocated space for Windows 7 were inside an extended partition, which Windows didn't like when I tried to install. So, because I had spent a few hours configuring Mint already, I backed it up to my external hard drive using dd. I have restored it to the new partition I made for Mint, but new the partition isn't the same size as the one I dd'd from, so I'm getting yelled at for having a bad superblock size. Is there any way that I can fix this while keeping the new, smaller partition? -Trey

  Read the article

• Rsyslog mail module not working

  - by Henry-Nicolas Tourneur

  I would like to email snort alerts from my Debian Lenny fw. Syslog is sending log messages from the firewalls to a central rsyslog. On my central rsyslog, I got something like : $ModLoad ommail $ActionMailSMTPServer server.company.local $ActionMailFrom [email protected] $ActionMailTo [email protected] $ActionExecOnlyOnceEveryInterval 1 $template mailSubject,"[SNORT] Alert from %hostname%" $template mailBody,"Snort message\r\nmsg='%msg%'" $ActionMailSubject mailSubject if $msg regexp 'snort[[0-9]]: [[0-9]:[0-9]:[0-9]].*' then ommail:;mailBody But I doesn't get any mails, I even can trigger snort with something like ping -s 1400, it logs things like following but still no mail ! 2010-01-08T09:25:58+00:00 Hostname snort[4429]: [1:499:4] ICMP Large ICMP Packet [Classification: Potentially Bad Traffic] [Priority: 2]: {ICMP} ip_dest - ip_src Any idea ?

  Read the article

• How to install an SSL certificate on an home server with IIS

  - by Rushino

  I have a home server which i would like to add SSL certificate (via IIS). I believe self-signed certificates are a bad idea so i was wondering how this actually work to have one installed on my server. This server is currently being accessed being outside.. this is basically for learning/pratical purpose. So if i understand correctly, it is possible OR do we have to buy an SSL certificate somewhere and install it on the server for use ? (by importing it in IIS) what are the actual brief steps ? Thanks!

  Read the article

• Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

  - by Darin Peterson

  Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

  Read the article

• Excel Add-In not loading properly with 64-bit Excel 2013

  - by David Hyde

  I have an Excel Add-In saved to an .xla file in %appdata%\Microsoft\Addins. In the subject version of Excel it is checked on the Add-Ins list. One thing this addin does is create a drop-down menu in ThisWorkbook's Workbook_Open sub. But the menu is not created and there is no Add-Ins tab on the ribbon. No error messages. This works fine in Excel 2010 and 2007 (at least), and worked fine on the 32-bit Excel 2013 that came preinstalled on this system before I nuked it. The really maddening thing is that if I get rid of this addin and open that same .xla file, either by double-clicking or using the Open command in Excel, the menu appears as expected. I get the same behavior if I instead open the source .xls file - it all works. I've also tried saving to a .xlam file instead of .xla, but get the same bad result. Any ideas?

  Read the article

• How can I rip a DVD but merge/join episodes

  - by Nifle

  Some background. I have the Pink Panther Collection, they have about 30 episodes on each DVD. Now I want to watch this on my $MobileDevice. So I went and converted it to m4v or avi. This of course went splendid with both Handbrake and AutoGK but the problem is that I want ONE file per DVD, both Handbrake and AutoGK creates one file per episode. So here finally is my question. Does anyone know how to persuade Handbrake or AutoGK to create one video file with all the episodes? Or can anyone recommend another (free/cheep) tool for the job? Oh and no cheating by telling me to join the files after conversion. I have never found a video joiner that did not disappoint me (usually bad audio sync).

  Read the article

• Can I trust that ZFS is consistent between Linux and FreeBSD?

  - by iconoclast

  I'm planning to build a FreeNAS box sometime soon, but if ZFS on Linux eventually proves to be reliable, I might want to switch, just to have a more familiar OS. So I'm wondering if I can trust that the different implementations of ZFS are compatible. In other words, if I just swap out the boot disk from FreeNAS to Linux or OpenIndiana, can I trust that nothing bad will happen to my data? This may seem like a stupid question--obviously it ought to be compatible--but I'm guessing that ZFS isn't commonly used in cases where drives are moved between computers, so I'm hoping someone can provide a better answer than just "it ought to be".

  Read the article

• Can someone explain RAID-0 in plain English?

  - by Edward Tanguay

  I've heard about and read about RAID throughout the years and understand it theoretically as a way to help e.g. server PCs reduce the chance of data loss, but now I am buying a new PC which I want to be as fast as possible and have learned that having two drives can considerably increase the perceived performance of your machine. In the question Recommendations for hard drive performance boost, the author says he is going to RAID-0 two 7200 RPM drives together. What does this mean in practical terms for me with Windows 7 installed, e.g. can I buy two drives, go into the device manager and "raid-0 them together"? I am not a network administrator or a hardware guy, I'm just a developer who is going to have a computer store build me a super fast machine next week. I can read the wikipedia page on RAID but it is just way too many trees and not enough forest to help me build a faster PC: RAID-0: "Striped set without parity" or "Striping". Provides improved performance and additional storage but no redundancy or fault tolerance. Because there is no redundancy, this level is not actually a Redundant Array of Inexpensive Disks, i.e. not true RAID. However, because of the similarities to RAID (especially the need for a controller to distribute data across multiple disks), simple strip sets are normally referred to as RAID 0. Any disk failure destroys the array, which has greater consequences with more disks in the array (at a minimum, catastrophic data loss is twice as severe compared to single drives without RAID). A single disk failure destroys the entire array because when data is written to a RAID 0 drive, the data is broken into fragments. The number of fragments is dictated by the number of disks in the array. The fragments are written to their respective disks simultaneously on the same sector. This allows smaller sections of the entire chunk of data to be read off the drive in parallel, increasing bandwidth. RAID 0 does not implement error checking so any error is unrecoverable. More disks in the array means higher bandwidth, but greater risk of data loss. So in plain English, how can "RAID-0" help me build a faster Windows-7 PC that I am going to order next week?

  Read the article

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• Can't restore HDD using multiple programs

  - by jonney

  Please refer to my original question about this issue. I tried GetDataBack and it doesn't seem to scan or do anything. I chose the default settings from the first screen and then on step 1 I chose my HDD that's damaged. In step 2, nothing happens. It doesn't scan or do anythong, and on step 3 it doesn't display any of my files. I have also tried TestDisk and what happens in TestDisk is that when I try to fix and rebuild the MFT, it says this: MFT and MFT mirror are bad. Failed to repair them. Here is the status of that HDD under Testdrive: I also tried this app and got no results when I tried to recover the files. I keep getting this error: Last but not least, I tried Recuva and that simply says it's unable to read the MFT. Any suggestions? I have tried various apps already and none of them seems to work.

  Read the article

• Should I install Windows 7 on a 3 years old PC?

  - by Jitendra vyas

  This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

  Read the article

• How to clean up an unprocessed orphan inode list?

  - by bmk

  I tried to mount a formerly readonly mounted filesystem read-writeable: mount -o remount,rw /mountpoint Unfortunately it did not work: mount: /mountpoint not mounted already, or bad option dmesg reports: [2570543.520449] EXT4-fs (dm-0): Couldn't remount RDWR because of unprocessed orphan inode list. Please umount/remount instead A umount does not work, too: umount /mountpoint umount: /mountpoint: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) Unfortunately neither lsof of fuser don't show any process accessing something located under the mount point. So - how can I clean up this unprocessed orphan list to be able to mount the filesystem again without rebooting the computer?

  Read the article

• Good default for XDG_RUNTIME_DIR?

  - by cadrian

  The XDG Base Directory Specification is a very interesting spec for user directories. It also provides good default values, except for XDG_RUNTIME_DIR. Now I am writing a software that needs to create named pipes. It is a per-user client-server framework (there is a FIFO for the server and a FIFO per client). If XDG_RUNTIME_DIR is not defined, I am currently using a per-user subdirectory in /tmp — but it does not ensure all the specified conditions (viz. the paragraph starting with "The lifetime of the directory MUST be bound to the user being logged in…") Is /tmp/myserver-$USER good enough? Edit I saw elsewhere a few suggestions: . is quite unsatisfactory (at least because it is not an absolute path). I also saw /var/run/user/$USER — not bad, but that directory does not exist (at least on my box running a Debian testing)

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >