Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 168/330 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • Is it possible to use a laptop as an external monitor?

    - by Jephir
    I need to create a multi-monitor setup for my desktop computer but I have no additional monitors with me right now, aside from my laptop. Is it possible to use my laptop screen as an external monitor? Note that I am not trying to connect a monitor to my laptop, rather, I am trying to connect my laptop screen to a desktop video card (if this is possible).

    Read the article

  • Intermittent Disconnection of Client Computers from Domain Server

    - by dilip nagle
    The Background: I have Windows 2008 server Enterprise Version with 25 user cal licences. It has a domain and all users and a network shared HP printer in it. The Server has two network cards and both these cards as well as all client machines are on IP addressing scheme of 192.168.1.* with subnetmask 255.255.255.0. Of the two network cards viz. 192.168.1.231 and 192.168.1.233, only 192.168.1.231 is registered with DNS. In 192.168.1.233(i.e. 2nd network card) has default getway as 192.168.1.231 and dns address as 192.168.1.231. The Server has three hard disks with capacities as 500gb, 500gb and 1TB and are partitioned as (C,D,E), (F,G) and (K) with partition K having all user data into various Shared Folders. Each of these folders(On Partition K), are mapped onto each user's computer as per the right of access given to them. The Problem: The Server was installed about 6 months ago and till date not even once, the Server has Hung or has given any problem. All the Clients computers are able to run the web based software from their computers via ip address, e.g. http://192.168.1.231/webERP/default.aspx. However, occassionally, when any client computer tries to browse network mappings, it hangs. Again, there is no fixed pattern. This may happen after running smoothly for say 3 days. On each Client's machine, the network settings are as follows: IP Address: 192.168.1.* where * is 1,2,3 .... Sunnetmask: 255.255.255.0 defauly getway: 192.168.1.231 Which is a server card and DNS address. preferred DNS Server: 192.168.1.231 In Advanced Tab under Wins: LMHostLookup is Unticked and default is radio buttoned. Ideally, I would have loved to have Disabled NETBIOS over TCP/IP but some network printers do not get accessed if this option is enabled(ie. Radio Buttoned). Bacause Disabling Netbios will drastically reduce traffic of NETBIOS broadcasting to all the computers on the net to do naming resolution. On Server, I have WINs Running which I have Scavanged Records, verified Database Integrity etc, removed Tombstoned Records etc. The Critical Errors shown only once a day when the server is statred are 4224(WINS) and 12923 - Server Licencing failed to Update DNS Record. I fail to understand as why do client machines HANG when they try to browse mapped network shared folders on K Drive. Kindly Advice

    Read the article

  • Tool to determine filesystem on removable media

    - by Todd Brooks
    I have a CompactFlash card that is used in a custom piece of hardware. WAV files are written to it. Windows doesn't recognize the media and wants to format it, which rules out FAT 16/32, NTFS, UDF, etc. Is there a Windows tool that can determine what filesystem the media is using and possible read the contents? I've tried dskprobe.exe, but it did not work.

    Read the article

  • How can I stream Pandora to my Xbox 360?

    - by iftrue
    How can I get pandora to stream to my xbox 360? My initial thoughts would indicate that I would need a software-emulated sound card, and then I would need a program to attach to that soundcard and perform the actual streaming. Has anyone done this before? If so, do you have instructions on how to do so?

    Read the article

  • Building a Mac/PC Network in a Dorm with Network Restrictions

    - by user70340
    I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

    Read the article

  • Why do my files fail checksums when transferring to esata dive but not when transfered off the external?

    - by R. Peterson
    I have been using teracopy to verify and the large movie files show artifacting after transfer and fail checksum, small files do not fail, only large files seem to. When I transfer files off the external hard drive no such failure of checksums occur on any of the files, could this be a bad cable, or maybe a bad external interface or esata interface on my computer, I have tried two interfaces for esata, one with a pci card the other on the motherboard, both with similar results, so what maybe the reason if a bad hard drive or external case maybe the problem?

    Read the article

  • Palit GeForce 8800GT 512MB Minimum Power Requirement?

    - by Wesley
    Hi all, I am building a system for a friend. The potential specs are like this so far: ASUS A8N-VM motherboard AMD Athlon 64 3200+ @ 2.0 GHz Any 7200RPM SATA HDD Palit GeForce 8800GT 512MB GDDR3 PCIe One DVD/CD combo drive Creative SB Live! 5.1 sound card I was wondering what wattage of power supply would be able to support this hardware. I had a 350W in mind... would that do? Thanks in advance.

    Read the article

  • PCI-DSS compliance for business with only swipe terminals [migrated]

    - by rowatt
    I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

    Read the article

  • When disabling the firewire-driver in Windows will this too disable firewire connected through a PCMCIA device?

    - by Christoffer
    The broader overarching question (not seeking an answer to this, but wanted to provide context) is how do I ensure that laptops running Microsoft Windows 7 and exposing DMA-ports (eg. firewire) are disabled once the operating system have loaded. Preventing the Firewire-driver from loading once Windows have booted works as expected, but I've been unable to confirm whether this too will disable a Firewire-port exposed through a PCMCIA-card. My question is hence whether disabling the Firewire-driver will also prevent a Firewire-port exposed through a PCMCIA from functioning?

    Read the article

  • TTY with 256 colors?

    - by timn
    With URxvt and xterm it is possible to use a virtual terminal supporting 256 colors instead of only eight. Since my Intel GMA graphics card is well-supported by the KMS framebuffer driver, I am exclusively working on the TTY. Unfortunately it only supports eight colors although with MPlayer (-vo fbdev/fbdev2) and other framebuffer tools far more can be addressed. Is there a way to tell the TTY to use more than eight colors?

    Read the article

  • Getting Wireless working on Dell Inspiron 1545 in Ubuntu 10.04?

    - by Dexter
    I'm trying to install my wireless drivers (which uses a broadcom card). I tried to install them using the restricted drivers offered on my Ubuntu CD. However when I clicked activate it got about halfway through the install process before it gave me this error message: SystemError: installArchives() failed How can I correct this?

    Read the article

  • Looking for old version of JBuilder

    - by mtgrares
    I'm looking for any of these versions:JBuilder 3-9. The reason for this is because my computer is old (256 MB, 800 Mhz cpu) but I still like to program. (Yes, I should upgrade my computer but greenbacks don't grow on trees.) And to prove that I really do program, I have an open source project where you play the trading card game Magic: The Gathering against the computer, http://code.google.com/p/cardforge The latest version was downloaded 1,862 times. Thanks for your time, mtgrares

    Read the article

  • amd gpu but display on intel integrated graphics

    - by pitseeker
    On my Ubuntu 12.04 I connected my monitor to the onboard intel graphics. I'd like to use my ati radeon 6770 for opencl tasks (e.g. bitcoin mining). So far I couldn't figure out how to get the ati driver working. When calling "aticonfig --initial -f" it always writes a new xorg.conf that ignores the intel graphics. At boot time it works only when I attached the monitor to the ati card. So I manually tampered with the xorg.conf and got this: Section "ServerLayout" Identifier "Default Monitor" Screen 0 "myscreen" 0 0 Screen 1 "deadscreen" RightOf "myscreen" EndSection Section "Module" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Monitor" Identifier "null Monitor" Option "Enable" "false" EndSection Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" Screen 0 EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "myscreen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "deadscreen" Device "aticonfig-Device[0]-0" Monitor "null Monitor" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I think this might be the right way since I see that X tries to start both drivers in /var/log/Xorg.0.log. However the fglrx driver seems crash (end of xorg.0.log): Backtrace: [ 6.625] 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fb5cd41b846] [ 6.625] 1: /usr/bin/X (0x7fb5cd293000+0x18c6ea) [0x7fb5cd41f6ea] [ 6.625] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fb5cc5b9000+0xfcb0) [0x7fb5cc5c8cb0] [ 6.625] 3: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so (xdl_xs111_atiddxGetGPUMapInfo+0x1b1) [0x7fb5c88e16b1] [ 6.625] 4: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so (atiddxGetGPUMapInfo+0xd) [0x7fb5c87bcc0d] [ 6.625] 5: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1ab29) [0x7fb5ca147b29] [ 6.625] 6: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1cf8c) [0x7fb5ca149f8c] [ 6.625] 7: /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so (0x7fb5ca12d000+0x1ee55) [0x7fb5ca14be55] [ 6.626] 8: /usr/bin/X (InitExtensions+0x99) [0x7fb5cd350069] [ 6.626] 9: /usr/bin/X (0x7fb5cd293000+0x3d605) [0x7fb5cd2d0605] [ 6.626] 10: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xed) [0x7fb5cb44e76d] [ 6.626] 11: /usr/bin/X (0x7fb5cd293000+0x3daad) [0x7fb5cd2d0aad] [ 6.626] Segmentation fault at address 0x14 [ 6.626] Caught signal 11 (Segmentation fault). Server aborting [ 6.626] I'd be very happy if someone can give me a hint on how to configure my ATI card while using the integrated graphics for display. Update I used most of jjhughes57 config and successfully booted the X server on intel (keyboard layout is changed though, funnily). Unfortunately the 2nd X server (fglrx) doesn't fully start. It shuts itself down right after starting [ 6.265] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments [ 6.296] (II) UnloadModule: "mouse" [ 6.296] (II) Unloading mouse [ 6.296] (II) UnloadModule: "kbd" [ 6.296] (II) Unloading kbd [ 6.298] (II) fglrx(0): Shutdown CMMQS [ 6.298] (II) fglrx(0): [uki] removed 1 reserved context for kernel [ 6.298] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fbef8209000 [ 6.337] (II) fglrx(0): Interrupt handler Shutdown. [ 6.470] ddxSigGiveUp: Closing log [ 6.470] Server terminated successfully (0). Closing log file. Thanks for any hints what is wrong here.

    Read the article

  • Ubuntu Studio 9.10 wireless doesn't work [closed]

    - by eric
    I just bought a brand new laptop. At first I was using Windows 7 and decided to switch to Ubuntu Studio 9.10 on my Studio Dell. My ethernet card is a Netlink. I do not have any connection at all to the internet, only when I plug the wire to my computer. I've tried a lot of stuff; nothing works. Can you help me please?

    Read the article

  • Win 7 Wireless Connected With Good Signal But No Internet Access

    - by c00lryguy
    In Windows 7 I was connected wirelessly for about a week when one day I came home and the wireless was connected with a strong signal but it said that I had "No Internet Access" It's been 3 days since then now and I have yet to find a way to fix it. My wireless drivers are right off the disk that came with the wireless card. Can anyone help me? My problem is similar to these: http://forums.cnet.com/5208-7589_102-0.html?threadID=120346 http://social.answers.microsoft.com/Forums/en-US/w7network/thread/90841fe7-c910-424b-82d7-48be7ef69f39

    Read the article

  • Virtual Wifi on Vista

    - by XGreen
    Hi Guys, Sorry if this is a very dumb question. I have installed the virtualWIFI msi on vista. I assumed that would simply just allow selecting more than one wifi connection with my single card however I don't get much new options. Any help on how to get this running on vista is greatly appreciated.

    Read the article

  • Have Ubuntu auto-connect to wireless AP without logging in

    - by dragonmantank
    We have an ubuntu box set up to do some monitoring but due to the placement are unable to run CAT5 to the box itself. I have an Atheros PCI card that works great as long as someone is logged into Gnome and it doesn't disconnect from the AP during that time. Is there a way to have Ubuntu connect to the AP during boot, and always reconnect if it finds a signal from a specified AP? The box would have a static IP and only connecting to a specific AP using WEP.

    Read the article

  • Why do some games randomly turn my screen a random solid color?

    - by Emlena.PhD
    When playing some games my computer will randomly have an error that I cannot fix without turning it off and back on again. The screen changes to one solid color, which varies (off the top of my head I can remember seeing solid green, magenta, etc..) and the sound blares a single tone. The sound sometimes briefly restores and I can still hear the game sounds and even hear and still be heard by people in my Mumble channel, but the screen doesn't right itself so I'm still blind. What's more is this happens in some games but not in others. While the game is actually running, not while I'm still in the menu. However, it does happen if I'm afk or idle but the game world is still rendering. Games where the error occurs: League of Legends World of Warcraft Trine The Sims 2 Dungeon Defenders Safe games: games where it has never occurred: Tribes: Ascend Star Wars: the Old Republic Battlefield 3 So relatively older games cause the problem while newer games do not? I cannot predict when it will happen, it just seems random. However, if it happens and I try playing the same game further after restart it does appear to occur more frequently after the first time. But if I switch to a safe game it doesn't continue happening. Both of my RAM sticks appear fine, flipped position or either one on their own and games still run, computer still boots. I would think over-heating, but then why not all games? ALso, sometimes it happens immediately after I start playing, within seconds of the 3D world booting up. I'm looking to upgrade very soon so I want to figure out what component or software is fubar and replace/repair it. Any suggestions or recommendations of tools would be helpful. Below is some system information. Dxdiag does not detect any problems. Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505) System Manufacturer: Gigabyte Technology Co., Ltd. System Model: EP45-UD3R BIOS: Award Modular BIOS v6.00PG Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~3.2GHz Memory: 4096MB RAM DirectX Version: DirectX 11 DxDiag Version: 6.01.7601.17514 64bit Unicode Graphics card name: NVIDIA GeForce GTX 285 Driver Version: 8.17.12.9610 (error has occurred w/several driver versions) Sound: I do not have a sound card, been using motherboard's built in sound)

    Read the article

  • Configuring IP-aliasing on a CentOS Apache server

    - by Saif Bechan
    I am trying out a method to implement IP-aliasing on an Apache server. Host multiple SSL sites on a single network card with IP aliasing I have followed all the steps, but when I browse to my second domain I always end up in my primary domain. Have anyone tried this method and is this even possible?

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >