Search Results

Search found 10429 results on 418 pages for 'high resolution'.

Page 168/418 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

  • DFS share Access denied for some time after workstation is booted.

    - by Jonathan
    I have 2 Win server 2008 servers acting as domain controllers and Dns servers doing DFS. All my workstations are windows xp sp3. I have a DFS share drive mapped at login via login script. After the pc is booted I get an access denied message when trying to access the mapped drive. If i go to the file share on one of the servers i can get to it fine. After about 10 minutes i can try to access the mapped drive again and it works fine. I am not sure if it is some delay happening in dfs name resolution or a gpo issue.

    Read the article

  • Mini DisplayPort to DVI-D Dual Link up to 2560 * 1600

    - by Steinway Wu
    I have a ThinkPad T530 with Mini DP++ and NVS 5400M, which are said to support 2560 * 1600 resolution. The display is Dell 3007WFP, which also supports 2560 * 1600. But, I have never seen any cables or adapters that can connect them with full support to 2560 * 1600. Do you have any idea? THANK YOU! In addition, I found that mDP++ means I can use a passive adapter. No need for active adapter which is much more expensive. This is the only one that meets my needs, but it is not sold in the US. And this one seems to be OK, but I am not sure because it says "2.5 Gbps per channel", which may not be enough.

    Read the article

  • Alternative to Amazon's S3 service?

    - by Cory
    Just wondering if there is good alternative to Amazon's S3 service? I like S3 but the bandwidth cost is high. I looked at CouldFiles from Rackspace but the cost is even higher. I don't mind prepaying or having monthly payment in order to reduce the bandwidth cost greatly. Thank you for any help

    Read the article

  • How common are power supply failures in comparison to hard disk failures?

    - by Adrian Grigore
    Hi, My webhost offers two different types of high availability options for dedicated servers: Redundant hard disks (RAID1) Redundant hard disks (RAID1) plus redundant power supply How common is a power supply failure in comparison to hard disk failure? I know it's not possible to know the exact figures without knowing the exact hardware, but ballpark figures are good enough for me at the moment. Thanks, Adrian

    Read the article

  • HP Pavilion dv6000 graphics issue

    - by Tony
    A few days ago my laptop seized up on me while I was playing a game. When I restarted the computer, it sent me back to 640x480 resolution with 16 colors (clearly a graphical issue). In device manager, it shows an error, stating "Windows has stopped this device because it has reported problems. (Code 43)" regarding the video card. Upon removing and re-installing the drivers using both Windows Update and my own searching through nvidia's site, it's given me zero results. For kicks, I ran my antivirus (you never know!) and registry cleaner to see if anything would turn up. The antivirus found nothing, but CCleaner found 27 registry errors all dealing with my video card. What could be the cause of this, and what course of action would you recommend in this situation? Thanks in advance for the help! OS: Windows 7 Professional GPU: nvidia GeForce 8400M GS

    Read the article

  • If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

    - by Enigma
    Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

    Read the article

  • can't resolve host (A) but FQDN is fine

    - by user1431356
    I am getting inconsistent name resolution locally with DNS I have 3 2012 Standard servers and some weirdness on 1. It is a standard install with IIS role added. TEST01 is a dev server. 192.119.1.220 with a host header of TEST01. DATA01 runs internal DNS on .240 and all servers and clients point here for DNS. There is a forward in DNS to 192.119.1.1 (router) with ISP external DNS #s mapped. if I ping TEST01 from a non AD machine, it I get "Could not find Host TEST01" If I ping TEST01 from a domain machine(another server), it resolves the IP but does not respond. if I ping TEST01.AD.local, DNS resolves the IP, but times out. I can access IIS by entering http://test.WWWDOMAIN.com and I can RDP to it, just not ping. Any idea where I should start?

    Read the article

  • VMWare Esxi Looking for Bottlenecks

    - by nextgenneo
    I have a VMWare ESxi box, 22GB ram, Dual Quad Core Xeon, 2 Sas drives + Write caching raid controller etc. Anyways, have about 30 small XP VM's running on it and starting to get some very slow boot times and other performance issues. I THINK its I/O but looking at the graphs not too sure what to look for. Any ideas on what to look for would be appreciated. Here is the data I've got so far: (I feel like my IO is high but not sure what to bench it against)

    Read the article

  • Google images sometimes terribly slow when using dnsmasq

    - by Joril
    Hi everyone! I am the admin of a small LAN of 10+ computers. I've set up a dnsmasq server for DHCP and DNS resolution, and it's working almost fine.. My problem is that when I try to use Google images, sometimes it takes ages to show the actual images. I get just the textual part of the page (menus and so on) while the images themselves are shown as the still-loading-white boxes.. When I use the DSL router directly as DNS, the site works fine all the time. The problem sometimes presents itself with Google maps too.. The map takes ages to load. Any idea on what I could try to troubleshoot this? (dnsmasq 2.47 on CentOS 5.2 64bit, our outside connection is an asymmetrical 4Mbps DSL)

    Read the article

  • Google images sometimes terribly slow when using dnsmasq

    - by Joril
    Hi everyone! I am the admin of a small LAN of 10+ computers. I've set up a dnsmasq server for DHCP and DNS resolution, and it's working almost fine.. My problem is that when I try to use Google images, sometimes it takes ages to show the actual images. I get just the textual part of the page (menus and so on) while the images themselves are shown as the still-loading-white boxes.. When I use the DSL router directly as DNS, the site works fine all the time. The problem sometimes presents itself with Google maps too.. The map takes ages to load. Any idea on what I could try to troubleshoot this? (dnsmasq 2.47 on CentOS 5.2 64bit, our outside connection is an asymmetrical 4Mbps DSL)

    Read the article

  • Memcached Debuging/Server Logs Monitor the Memcached Servers?

    - by user1179459
    I have chat engine which is based on the Memcached variables, putting them into arrays and reading them in other end via jquery, which works fine 95% of the times, however when the server load is high memcached (presume its the memcached) the crash and browser gets stucks up. I dont think its jquery issue since this only happens when the server load is very high. I need a way to monitor the memcached servers or somehow write a log file into where the fails/errors comes in... Any idea on how i can do this ? or any idea why memcached servers fails ? I run the memcached as follows $GLOBALS['MemCached'] = FALSE; $GLOBALS['MemCached'] = new Memcache; $GLOBALS['MemCached']->pconnect('localhost', 11211); My memcached config is as follows #! /bin/sh # # chkconfig: - 55 45 # description: The memcached daemon is a network memory cache service. # processname: memcached # config: /etc/sysconfig/memcached # pidfile: /var/run/memcached/memcached.pid # Standard LSB functions #. /lib/lsb/init-functions # Source function library. . /etc/init.d/functions PORT=11211 USER=memcached MAXCONN=1024 CACHESIZE=128 OPTIONS="" if [ -f /etc/sysconfig/memcached ];then . /etc/sysconfig/memcached fi # Check that networking is up. . /etc/sysconfig/network if [ "$NETWORKING" = "no" ] then exit 0 fi RETVAL=0 prog="memcached" pidfile=${PIDFILE-/var/run/memcached/memcached.pid} lockfile=${LOCKFILE-/var/lock/subsys/memcached} start () { echo -n $"Starting $prog: " # Ensure that /var/run/memcached has proper permissions if [ "`stat -c %U /var/run/memcached`" != "$USER" ]; then chown $USER /var/run/memcached fi daemon --pidfile ${pidfile} memcached -d -p $PORT -u $USER -m $CACHESIZE -c $MAXCONN -P ${pidfile} $OPTIONS RETVAL=$? echo [ $RETVAL -eq 0 ] && touch ${lockfile} } stop () { echo -n $"Stopping $prog: " killproc -p ${pidfile} /usr/bin/memcached RETVAL=$? echo if [ $RETVAL -eq 0 ] ; then rm -f ${lockfile} ${pidfile} fi } restart () { stop start } # See how we were called. case "$1" in start) start ;; stop) stop ;; status) status -p ${pidfile} memcached RETVAL=$? ;; restart|reload|force-reload) restart ;; condrestart|try-restart) [ -f ${lockfile} ] && restart || : ;; *) echo $"Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart|try-restart}" RETVAL=2 ;; esac exit $RETVAL

    Read the article

  • How to convert pcm to mp3?

    - by avirk
    I have some .pcm files and I want to convert them on high quality .mp3 format. I tried to find tools by Google search but did not get the right one for me. I will prefer the freeware but if there is not a good freeware then I can also consider the shareware. The pcm format has much large files as I have 200-500 mb so the tool should be able to handle the large files. Please help me regard this problem.

    Read the article

  • Windows 7: blue faces in VLC... sometimes

    - by Mala
    Hi There are a bunch of forum posts about this issue from the last several years but no resolution that I could find. I have the newest VLC installed on Windows 7 with the newest nvidia drivers. Suddenly, VLC plays some videos in such a way as faces are blue. When viewed in another media player, or when looking at the thumbnails, this is not an issue. Other videos are not affected. I've tried resetting VLC options, deleting the VLC folder in the AppData area, etc. I have no other color issues. Does anyone have a fix?

    Read the article

  • Can my laptop run dual 1080p (Sony Vaio - Nvidia 330M)

    - by Charlino
    I am looking to buy a monitor to setup dual monitors for my laptop and was wondering if my laptop could handle 2 x 1080p. I have a Sony Vaio VPCF116FG which has a Nvidia GeForce 330M chip and 1GB dedicated graphics memory. The laptop also has a Intel® Core™ i7-720QM Processor (1.60 GHz with Turbo Boost up to 2.80 GHz) but I don't know if that's relevant(?). The laptop screen has a native resolution of 1080p (1920 x 1080) so I'll be looking at buying a external monitor with 1080p to connect up using a HDMI cable. So, the question is, will my laptop be able to handle it's own 1080p screen AND an external 1080p screen? TIA, Charles

    Read the article

  • FreeBSD Listen Queue Overflows - can't increase max queue size

    - by Harry
    I have a decently high trafficked FreeBSD Nginx server, and I'm starting to get a large number of listen queue overflows: [root@svr ~]# netstat -sp tcp | fgrep listen 80361931 listen queue overflows [root@svr ~]# netstat -Lan | grep "*.80" tcp4 192/0/128 *.80 [root@svr ~]# sysctl kern.ipc.somaxconn kern.ipc.somaxconn: 12288 [root@svr ~]# However I can't seem to increase the max listen queue length past 128. I've increased kern.ipc.somaxconn, but it's not changing the max. Am I missing something? Thanks!

    Read the article

  • New drivers, now switchable graphics won't work

    - by Glenn Andersson
    I have an ASUS notebook with dual AMD/ATI graphic cards. Before I've been able to switch individual programs in the Vision Control Center from high performance to energy saving and the other way around. But today I updated the drivers using the AMD Mobility to version 12.10, and now every time I try to configure switchable graphics it either shuts down or does not come up at all. I have a new menu item called Global Switchable Graphics settings though. Any thoughts on this?

    Read the article

  • Where are Adobe Acrobat Pro settings saved

    - by Bruce227
    Hi, I'm trying to figure out where the settings and options of an application(Adobe Acrobt Pro) are saved. This is to modify the settings without opening the application and going through the menu options. I'm trying to change the resolution of TIF settings. I have looked in the program file acrobat folder and the douments and settings but haven't found it. I also looked through the registry entrees just to make sure but didn't see anything relevant. Anyone have any ideas? Thanks

    Read the article

  • How is load average related to CPU utilization?

    - by Kaustubh P
    I am facing a load average of 3 since past 2 days. The CPU utilization is never above 40 % in all cases. Here are some screenshots of Server Density monitoring tool that I use. The process snapshot at the highest peak, @ 0:00 is as follows: And the process snapshot at the peak created at 12:00 is: My question is, even though CPU utilization is not 100 %, why am I facing a high average? PS: All snapshots are sorted by descending CPU utilization.

    Read the article

  • How to resolve IPs in DNS based on the subnet of the requesting client?

    - by Nohsib
    Is it possible to configure Bind9 or other DNS to resolve the domain name of a machine into different IPs based on the subnet of the requesting client? e.g. Say the same service is running on 2 different application servers at different geographical points and based on the incoming request to resolve the domain name, the name server provides the IP of the application server based on the requesting client's IP, so the service could be offered by servers that are geographically closer to the client. In short, something like a CDN but just the IP resolution part based on the client's subnet. Is this configurable in any DNS?

    Read the article

  • MacBook can't use internet, but nslookup and ping both work

    - by Joel Coehoorn
    I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

    Read the article

  • What applications can be used in a Red Hat/CentOS cluster?

    - by Sandra
    Hi, When I look at the Red Hat cluster manuals 1 2, they only explain how to install it but not what applications can use it. I am new to clusters, so I don't know these things =) Let's say I want to 3 node high performance cluster; What applications would work with it? Also, how does an application talk to the cluster? Does the application need to have been written to support clusters? Sandra

    Read the article

  • Unable to resolve hostname on a proxy network

    - by ali
    I can browse sites using firefox configured with proxy 172.1.6.0.6:3128 resolv.conf domain pudhcp.ac.in search pudhcp.ac.in nameserver 172.16.0.7 I checked with Windows and I found the same DNS server settings 127.0.0.1 bt 127.0.1.1 bt Above is the hosts file I modified the top line from localhost to bt still not working bt is the hostname Still I can't ping to google.com - it is showing unable to resolv hostname I tried all solutions,I guess proxy is used even for DNS resolution root@bt:~# dhclient There is already a pid file /var/run/dhclient.pid with pid 7157 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth1/5c:ac:4c:b1:0c:7c Sending on LPF/eth1/5c:ac:4c:b1:0c:7c Listening on LPF/eth0/60:eb:69:18:4d:3d Sending on LPF/eth0/60:eb:69:18:4d:3d Sending on Socket/fallback DHCPREQUEST of 172.16.6.87 on eth0 to 255.255.255.255 port 67 DHCPACK of 172.16.6.87 from 172.16.6.1 bound to 172.16.6.87 -- renewal in 79432 seconds.

    Read the article

  • VMWare - persistent "Host memory status" alarm in vSphere

    - by ewwhite
    I have a particular VMWare ESX 4.1 host that has a very persistent "Host memory status" alarm. This is running on an HP ProLiant DL360 G7 server. The HP ILO and System Management agents don't know any errors. If I clear the alarm in the vSphere client, it returns within a day. I've tried reseating DIMMs, however, the error does not indicate a problem with a specific module. There's another host in the cluster with an identical configuration. It's not exhibiting any issues. Any thoughts? This is touched on briefly on other forums (and here) with no clear resolution.

    Read the article

  • The Active Directory integrated DNS zone _msdcs.COMPANY.LOCAL was not found.

    - by MadBoy
    Recently we renamed our domain from single domain name COMPANY to COMPANY.LOCAL due to multiple problems. However now I get this information from BPA. Issue: The Active Directory integrated DNS zone _msdcs.COMPANY.LOCAL was not found. Impact: DNS queries for the Active Directory integrated zone _msdcs.COMPANY.LOCAL might fail. Resolution: Restore the Active Directory integrated DNS zone _msdcs.COMPANY.LOCAL. Clearly there is no _msdcs.COMPANY.LOCAL as there is only old one _msdcs.COMPANY however when i check under COMPANY there is no _msdsc, but there is one when i check inside COMPANY.LOCAL. So it seems to me that _msdcs.COMPANY.LOCAL should use the one that is inside COMPANY.LOCAL? Should it not? Should I try to recreate it by hand (since it wasn't created on domain rename).

    Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >