Search Results

Search found 5127 results on 206 pages for 'startup crazy'.

Page 168/206 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Windows 2008 server smart card security module problem

  - by chris13work

  Hi, I've got a smart card reader and a server application using it as a security module. If I run it under DOS prompt, everything is fine. The server is running and clients can connect to it. I tried to install the server as window service and start it. The server starts but always gives back authentication error because it cannot call the smart card to do encryption. Then I tried to start it with task scheduler and set the trigger factor as "on startup". The server starts also but still cannot access the smart card reader. Then I tried remote desktop to the machine and run the server application under DOS prompt. Same error is returned. The situation is that the smart card reader only works under active console desktop environment. In the server application, WINSCARD API is used to access the smart card reader. Any suggestion so that we can access the smart card reader in running services? OS: Windows Server 2008 Smart Card Driver: Windows USB smart card Reader Smart Card API: WINSCARD

  Read the article

• 2011 i7 Macbook Pro unable to boot from any Windows CD?

  - by Craig Otis

  I'm encountering issues installing Windows alongside my Lion install. I'm attempting to install from the internal SuperDrive, after using Boot Camp to partition what was a single, HFS+ volume. When holding down Option at boot, the CD appears in the startup list, but upon selecting it, I get a gray screen for 5 minutes, then a flashing white folder. I tried installing rEFIt and using this to boot the CD, but I receive an error about "Not Found" being returned from the "LocateDevicePath", and a mention of the firmware not supporting booting using legacy methods. In the Console, when opening the StartupDisk preference pane (which never presents the CD as a selectable option), I see: 11/25/11 4:39:31.159 PM System Preferences: isCDROM: 0 isDVDROM:1 11/25/11 4:39:31.159 PM System Preferences: mountable disk appeared: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.214 PM System Preferences: - So far so good, passing disk to System Searcher. 11/25/11 4:39:33.218 PM System Preferences: OSXCheck: No boot.efi in System Folder or volume root. 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD I'm at a loss here. I've done my research, but it sounds like most of the rEFIt errors of this nature are caused by installing from a thumbdrive, or an external drive. I'm using the internal SuperDrive. Also, I've tried this with two different disks: A Windows XP SP2 CD A Windows 7 x86 DVD Both are disks I've had around for years, and I've used them reliably in the past. The system is an early 2011 15" Macbook Pro, all firmware updates installed.

  Read the article

• Java Deployment and Configuration (1.6.0_21)

  - by user125137

  Sofware: Java Runtime Environment 1.6.0_21 OS: Windows XP Professional 32-Bit, SP3 Situation: a new piece of web based software is being deployed this week and prior to this all the company desktops need to be set up to meet the requirements of this software. One of these requirements is JRE 1.6.0_21. I have successfully scripted the removal of all other Java versions and the installation of the required version, however I cannot get it configured properly. One of the requirements is that the Java console be set to disabled - if it is not it can cause an issue with a particular function. I have pushed out a deployment.config and deployment.properties but the console just will not disable itself.. I know the config is being read correctly because the update tab is being correctly disabled and removed. deployment.config: deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties deployment.system.config.mandatory=true deployment.properties: #deployment.properties #Fri Jun 15 09:34:31 EST 2012 deployment.version=6.0 deployment.console.startup.mode=DISABLE deployment.javaws.autodownload=NEVER deployment.javaws.autodownload.locked= There is no change if I set the console to ENABLE either - it remains on the default of hidden. I'm sure I can disable the console with a registry change of some form but my preference is to have it done via the deployment files as it gives the option of centralising the properties file to a network share if we wish. If anyone has any suggestions it would be appreciated.

  Read the article

• Screen Flicker on a black MacBook

  - by sixtyfootersdude

  I have a MacBook Black. For about the last six months I have had a strange screen flicker when I: start my machine and plug in the power cord of my machine This morning when I woke up my computer the screen backlight did not turn on at all. When I held the computer in direct sunlight I could see the screen and I could tell that everything was working normally (other than the backlight). Pressing the screen brightness controls (F2) brought up the brightness panel. The brightness panel informed me that the screen was at maximum brightness. I did a bit of Searching and this is what I found: This post describes how to buy and replace a macbook screen. Do you think that this would solve my problem? Additional info: I am running 10.6.4 I recently upgraded from 10.4. I experienced similar issues in 10.4. I am pretty sure that this is a hardware issue. The problem does not occur when the screen is at a specific angle. It usually only happens at startup/wakeup or when the power is plugged/unplugged.

  Read the article

• About to go live: virtual dedicated server or cloud?

  - by morpheous

  I am about to launch my startup company, and we will be going live in a few weeks time. We have really tight budgetary constraints, since we are bootstrapping - and would prefer not to raise external capital. I cant use shared hosting because I need more control of the server machine (for technical reasons - e.g. using proprietary extensions to PHP, Apache and in the database layer as well) - but want to control costs and dont want to go fully private server route, until we have determined the market size etc. So the only real alternatives AFAIK is between virtual server and the cloud. At the moment, cloud services seem a bit "vague" to me. My understanding is that they allow an entity to outsource its IT infrastructure, which in my mind (at least), is indistinguishable from what a hosting provider provides (at least from a functional point of view) - I would like to seek some clarification on exactly what the difference between the two is. Back to my original question, my requirements are: IT infrastructure that can scale with growth Ability to have control of the machine (for e.g. to install our internally developed libraries etc) Backup software that is flexible and comprehensive enough (yet simple to use), that allows a (secured) backup strategy to be implemented. On this issue, I have always wondered where the actual backed up data was stored (since the physical machines are remote, and one cant get access to any actual tapes etc backed onto). I would also like some advice and recommendations in this area. Regarding data size, I am expecting the dataset to be increasing by a few megabytes of data (originally, say 10Mb, in about a years time, possibly 50Mb) every day. As an aside, I have decided to deploy on a Debian server (most of my additional libraries etc were compiled and built on a Debian machine). Mindful of all of the above, I would like some advice (and reason) as to which route to take. I would also like some advice on which backup software to use, from people who have walked a similar path.

  Read the article

• Windows recovery partition with GRUB2

  - by Actorclavilis

  So I recently got a new Toshiba laptop and installed Ubuntu 12.04 on it. Since it is a "Windows 7 Enabled" machine or some other proprietary nonsense like that, a few hardware features are designed only to work with W7. Eventually I found a way to enable these hardware functions by booting into the W7 recovery disc; however, they sporadically stop working. I'm moderately surprised that I was able to get anything to work at all, so I don't especially want to spend more time fixing the problems in a different fashion. Now I don't actually own the recovery disc; it's my father's. Since it's a pain to have to go asking for the disc every time the features stop working, I made an image of the disc and was hoping to make a 'recovery' partition like some computers have. However, unetbootin and GRUB2 both want a kernel and initrd to point to on startup, and something like set root=(hd0,1) loopback lo /w7r.iso set root=(lo) chainloader +1 in the spirit of the makeactive/ chainloader +1 commands that I used to use to dual-boot Linux and Windows simply gives me a file-not-found error. My question, therefore, is: Is it possible to, having written a Windows iso to a partition (such as with dd if=w7r.iso of=/dev/sda4) to a partition, convince GRUB2 to boot from it? Thanks in advance.

  Read the article

• Terminate child processes on ctrl-c

  - by jackweirdy

  In tiny core linux, I have the following script: #!/bin/sh # ~/.X.d/freerdp.sh rdp(){ while true do xfreerdp -f [IP Address] done } rdp & It's pretty simple; when X starts up and checks the .X.d directory (as is the case in tiny core) it finds and executes this script. The script starts up freerdp and keeps a connection open to the server by restarting it whenever it closes. As you can see from the rdp & line, the function is run in the background to allow X to continue its startup routine. The problem is that whenever I cancel X with a Ctrl-Alt-Backspace the rdp process doesn't die. I'm looking for a way to kill the process as soon as X finishes, either through: A) a script, executed on X closing, which kills the process or B) by modifying the script to check the return value of the xfreerdp command. NB - if the solution does check the return value, it must only end if the command fails to open the X display. For that reason, if you could point me to a reference for xfreerdp return values I'd be grateful.

  Read the article

• Metacity/Compiz not staring upon Login Ubuntu 10.10

  - by Ryan Lanciaux

  TLDR: As of this afternoon, I do not have a window manager when I login to Ubuntu 10.10. I would like to have window manager on login without needing to add to startup. Just started using linux again as my home OS. (Used it for a long time years ago but been on windows up until this past weekend) so this may be kind of n00b-ish :) Anyways, up until today, everything on my machine was running okay. I did not have compiz running as the default wm because I'm running NVidia Drivers and Xinerama (and as I understand Xinerama & Compiz don't work well together). I made no changes to my xorg / etc but today when I logged in, I had to manually start metacity from command line to get any window manager. Really not sure what would be causing this or what I can do to get it working again. My xorg.conf is available here: https://gist.github.com/845618. My default Window Manager is set to /usr/bin/metacity in Configuration Editor under /desktop/gnome/applications/window_manager. p.s. Any tips on how to run 3 monitors where I can move windows between screens without Xinerama would be appreciated but that's prolly for another thread :)

  Read the article

• Delay init from starting a service for a period of time?

  - by Matthew

  I am trying to get a rudimentary NFS server up and running. Right now the server is configured as an NFS server due to a workaround for a vendor issue not supporting direct attached clustered storage, which we are trying to get them to resolve. The vendor software is Splunk. The splunk feature we are using requires files be located on shared storage (which for us is /mnt/nfs until they support a real clustered filesystem). Currently the server has a GFS2 filesystem mounted at bootup (it is the only server with the filesystem actively mounted so there should be no problems with locking). We went with GFS2 so switching over to a clustered filesystem is easy should the vendor begin supporting it. NFS is configured to mount that filesystem at /mnt/nfs, which the splunk installation than sees. Splunk is configured to find it's configuration files in /mnt/nfs. However, I am running into a problem where the splunk daemon starts before nfs is finished loading, and because it sees nothing at /mnt/nfs it starts creating files there, and then when the files disappear (nfs finishes mounting the share), splunk craps out. Splunk is set to run at runlevel 3, S90. NFS is set at runlevels 2-5, S60. Is there any way to delay the startup of the splunk process further?

  Read the article

• Plone site randomly serving wrong content

  - by Chris Miller

  I have a Plone site that has begun to randomly serve up the wrong content. Any given content suddenly shows something else. Sometimes a JPEG loads a stylesheet instead or a stylesheet loads as a page or a page as an image. The images move around, some times our site logo shows a bullet, or one of the other site images. Fiddler shows the wrong content in the response, the apache logs show the content type of the incorrect file (so if the an image loads in place of a style sheet, apache shows that). We thought mod_proxy was the source of our grief, but we get the problem hitting Zope directly. I never get the wrong content using the Medusa Monitor to repeatedly hit the content. I do see ConflictErrors in the instance.log file, and they seem to be correlated to the problem, but not 100%. ZPublisher.Conflict ConflictError at \path\to\object: database conflict error (oid 0x3586, class BTrees._OIBTree.OIBTree, serial this txn started with blah, serial currently committed blah) (X conflicts (0 unresolved) since startup blah) I pulled that off the web, it's not from our logs, but it's the same message. This may be a red herring, it sounds like those messages are normal. We've updated to the 3.3.5, same problems. I'm at a loss. I'm wondering if there a good way to intercept what is being served? Secondly, is there a way to increase the verbosity of the access log to included the content-type? I've even seen the problem manifest in ZMI. It happens more often when we're authenticated. Sometimes it can take a thousand reloads to see the problem, other times it happens in different ways every time we reload. I believe we've seen this problem for a couple years, but it was very intermittent, a page would show the content of a GIF, then a reload later wouldn't happen for a long time. Now it's a huge problem.

  Read the article

• Word 2003 will not show up in Windows 7

  - by invadersil

  I just installed Windows 7 over the holiday and it went swimmingly well. Today I finished up a few things like installed MS Office 2003. That went well too, until I tried to open up Word. When I try to open up Word on its own, it comes up in the application bar but the application window does not show. I use Word as the editor in Outlook which does work. I also discovered that I can start it up in safe mode and it will work normally. But normal startup just doesn't show me anything. Oddly, if I start typing stuff while the app is selected in the app bar and then try to close it, it pops up a message asking if I want to save it. I tried running the compatibility utility within Windows 7 but still no dice. Has anybody seen this issue yet? The other Office apps start normally. Edit: More info: Windows 7 Pro 64-bit. Office is patched up to SP3. And last time I checked, there were no updates either (and fully updated with KBs after SP3) And I did a fresh install of Windows 7.

  Read the article

• which vista services can be disabled with impunity?

  - by GwenKillerby

  I use Vista on a HP pavilion DV2 laptop. When I look through all the services my laptop starts, it really seems there's way too much of it. I multi boot with XP and 7. Both startup in 40 seconds. Vista takes four minutes. Is there some software that can determine which services I don't need? On 7, there's no propietary HP stuff at all, yet it seems to run fine. Because all these service, there's a LOT of them and some just sit there doing nothing, monitoring for updates I don't really need or want or need to know about the second they're available. my laptop is the only computer i use at home, there's no home network, aside from the modem-router, which is cabled, not wifi. Take for instance Parental controls, and stuff for people with bad eyesight, Tablet PC. I really never use any of that stuff. Hope this question is specific enough. I've looked at the other questions but they didn't answer me. thanks, Gwen.

  Read the article

• Attaching 3.5" desktop drive to MacBook SATA

  - by Kyle Cronin

  I have a mid-2007 MacBook that, according to the Apple Store, has suffered some liquid damage and requires a new logic board to operate correctly, a ~$750 repair I've been told (would normally be around ~$300 were it not for the "liquid damage"). The unit itself works fine - the only problem I've been having is that the system does not recognize the battery and will not charge it. Curiously, the system can still be powered by the battery and even recognizes when the power cord is detached by diming the backlight, but I digress. Now that this laptop will likely become a desktop, I'm wondering if it might be possible to attach a desktop drive. I recently purchased a 2TB SATA drive and I'm wondering if it's possible to somehow attach it where the current internal drive connects. Obviously the drive itself will not fit inside the device, but as the unit will spend the rest of its days on my desk, that's not really much of an issue. My main questions are: Is this possible? If so, how would I connect the drive? Would a SATA extender cable work? Is the SATA port on my MacBook capable of powering a desktop drive? Or should I just get a SATA male-to-female cable and see if I can power the drive through other means (a cheap power supply, for example) The disk I'm referring to is the Hitachi Deskstar HD32000. Though I couldn't find that exact model on Hitachi's support site, these are the power requirements for a similar drive, the 7K2000 (2TB, 7200RPM, SATA II): Power Requirement +5 VDC (+/-5%) +12 VDC (+/-10%) Startup current (A, max.) 1.2 (+5V), 2.0 (+12V) Idle (W) 7.5 From what I've read, 2.5" drives require 5V, meaning that my MacBook obviously is capable of producing it. The specs seem to suggest that this drive seems capable of accepting it instead of the typical 12V - is this an accurate interpretation of the power requirements? Or does it need both 12V and 5V?

  Read the article

• Hibernate between OS X and Bootcamp Win 7

  - by Willem

  Wouldn't it be great if someone wrote a guide or an app which allowed you to switch instantly between OS X and Windows using Hibernate in both OS:s? Windows 7 already has an option "Hibernate" which allows you to boot back to your OS X partition, but OS X does not exactly offer the same. However, there are possibilities here. It seems that the recent Mac's have 3 different kinds of sleeping mode: Sleep: Low power consumption, RAM still active. Legacy Safe Sleep: No power consumption(?), writes RAM to disk and shuts down (is this the same as Hibernate?) Safe Sleep: Writes RAM to disk and enters sleep mode. If battery level drops too low it goes into Hibernate (is this Hibernate the same as #2 in this list? This is the Hibernate I will be referring to int he rest of this post) It seems that I am unable to force my MacBook Pro (Late 2011) OS X 10.7.3 into a true hibernate using either command line or apps that are supposed to do this. I believe the Mac should show that white loading bar whilst waking up if it was truly put into hibernate (which it does not). But I can get this white bar to show by letting my battery level drop to 0% so there is obviously a system function for it (obviously, duh! :). When Win 7 goes into hibernate it shuts down completely and you can then boot into OS X on startup. On OS X however, hibernate forces you to wake up into OS X. Can you hack this so that you're allowed to select boot partition after OS X hibernates? Would it be possible to use the true hibernate system functionalities of Win 7 and OS X to create a kind of instant switching between the two? Imagine this on a quick SATA-3 SSD like my 180GB Intel 520. Thanks / Willem

  Read the article

• Corrupted NTFS Drive showing multiple unallocated partitions

  - by volting

  My external hdd with a single NTFS partition was accidentaly plugged out (kids!)... and is now corrupted. Iv tried running ntfsfix - with no luck - output below.. When I look at the disk under disk management in Windows 7 it shows up as having 5 partitions 2 of which are unallocated - none have drive letters and it is not possible to set any (that option and most others are greyed out) - so I can't run chkdsk /f Iv tried using Minitool partition wizard which was mentioned as a solution to another similar question here. It showed the whole drive as one partition, but as unallocated, and the option -- "Check File System" was greyout. Is there anything else I could try ? Output of fdisk -l Disk /dev/sdb: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytest I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x69205244 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 218129509 1920119918 850995205 72 Unknown /dev/sdb2 ? 729050177 1273024900 271987362 74 Unknown /dev/sdb3 ? 168653938 168653938 0 65 Novell Netware 386 /dev/sdb4 2692939776 2692991410 25817+ 0 Empty Partition table entries are not in disk order Output of ntfsfix me@vaio:/dev$ sudo ntfsfix /dev/sdb Mounting volume... ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument Record 0 has no FILE magic (0xffffffff) Failed to load $MFT: Input/output error FAILED Attempting to correct errors... ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument Record 0 has no FILE magic (0xffffffff) Failed to load $MFT: Input/output error FAILED Failed to startup volume: Input/output error Checking for self-located MFT segment... ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument OK ntfs_mst_post_read_fixup_warn: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument Record 0 has no FILE magic (0xffffffff) Failed to load $MFT: Input/output error Volume is corrupt. You should run chkdsk. Options available with MiniTool: Related questions: How to fix a damaged/corrupted NTFS filesystem/partition without losing the data on it? Repair corrupted NTFS File System

  Read the article

• Windows 7 ignores F6/F8 and will not boot

  - by P.Brian.Mackey

  I have a work PC with sophos safeguard encryption on it. Windows failed to start. When I bootup I receive an error saying a recent hardware or software change might be the cause. File: \Boot\BCD Status: 0xc0000098 Info: The windows boot configuration data file does not contain a valid OS entry. This began after the PC forced me to run a system recovery. My machine had powered down improperly (power outage?) and simply would not respond to my keyboard input to cancel the option to scan my system. After the scan "repaired" a boot file, my system crashed. Now it tells me I can insert my windows 7 disk and run recovery. I can't simply do this because of Safeguard. The system recovery can't see my encrypted drive. I tried hitting F2 to manually login to Safeguard and then selected the option to boot from media. The computer prompts me to hit any key to boot from disk...which I do, but once again it is not reading my keyboard input. I can't get F8/F6 to bypass startup files and get me to a command prompt like the old days. If I could get to a command prompt I might could recover the file windows jacked up from its backup location...though I may need to use the windows recovery disk UI to do this..??? In the past I've been able to slap in a PS/2 keyboard when the USB keyboards stop responding like this. I have no PS/2 keyboard available. Anyone have any idea how I can undo the damage windows system recovery has done with safeguard installed?

  Read the article

• How do I move a linked file on Unix?

  - by r3mbol

  I have a bunch of files in one directory and links to each one of those files in another directory. So ls -l looks something like this: lrwxrwxrwx 1 rembol rembol 89 Jan 25 10:00 copyright.txt -> /home/rembol/solr/target/deploy/data/core/copyright.txt lrwxrwxrwx 1 rembol rembol 92 Jan 25 10:00 jar-versions.xml -> /home/rembol/solr/target/deploy/data/core/jar-versions.xml lrwxrwxrwx 1 rembol rembol 85 Jan 25 10:00 lgpl.html -> /home/rembol/solr/target/deploy/data/core/lgpl.html lrwxrwxrwx 1 rembol rembol 79 Jan 25 10:00 lib -> /home/rembol/solr/target/deploy/data/core/lib lrwxrwxrwx 1 rembol rembol 87 Jan 25 10:00 readme.html -> /home/rembol/solr/target/deploy/data/core/readme.html drwxr-xr-x 3 rembol rembol 4096 Jan 25 10:00 server drwxr-xr-x 2 rembol rembol 4096 Jan 25 10:00 startup Now I want to move those linked files from /home/rembol/solr/target/deploy to /home/rembol/output/. If I do that my simply calling mv, links will break. I don't want to re-link each file separately, cause there are hundreds of them (they are generated automatically). Is there some clever way to move linked files, rather than writing a script that unlinks, moves and relinks recursively for each file in each subdirectory?

  Read the article

• Proper web server setup

  - by DMin

  I just got myself a slicehost basic slice to play around with so I can learn how to setup web-servers. I have Ubuntu 10.04.2 installed on the server. I was able to successfully get the server up and running from scratch, these were the things I did - following this tutorial. I know this is probably just a starters tutorial, so, I was wondering if you guys can tell me what you like to do while setting up production servers. These are the steps that were followed : Update and Upgrade Ubuntu sudo apt-get install apache2 php5-mysql libapache2-mod-php5 mysql-server Backup a copy of and edit apache2.conf Set : 'ServerTokens Full' to 'ServerTokens Prod''ServerSignature On' to 'ServerSignature Off' Backup php.ini and then Change “expose_php = On” to “expose_php = Off” Restart Apache Install Shorewall firewall Configure Shorewall to only accept HTTP and SSH connections(in the rules file) Enable shorewall on startup Add the website to the server : sudo usermod -g www-data root sudo chown -R www-data:www-data /var/www sudo chmod -R 775 /var/www I want make this CommunityWiki but can't seem to find the option to do it. Please feel free to add any feedback on the processes and things I am doing right/wrong. Much appriciated, thanks! :)

  Read the article

• How to know whether mongodb is running on 64 bit mode or 32 bit mode

  - by Jim Thio

  My programmer install mongodb. Then somehow it doesn't work. I run C:\mongod\bin>mongod mongod --help for help and startup options Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 warning: 32-bit servers don't have journaling enabled by def ault. Please use --journal if you want durability. Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 [initandlisten] MongoDB starting : pid=3800 port=27017 dbpat h=/data/db 32-bit host=haryantoi5 Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Sat Aug 11 22:57:50 [initandlisten] ** see http://blog.mongodb.org/post/13 7788967/32-bit-limitations Sat Aug 11 22:57:50 [initandlisten] ** with --journal, the limit is lower Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] db version v2.0.7-rc1, pdfile version 4.5 Sat Aug 11 22:57:50 [initandlisten] git version: 9efe4cce272373b52b96de1309c1fbf 0c984305f Sat Aug 11 22:57:50 [initandlisten] build info: windows sys.getwindowsversion(ma jor=6, minor=0, build=6002, platform=2, service_pack='Service Pack 2') BOOST_LIB _VERSION=1_42 Sat Aug 11 22:57:50 [initandlisten] options: {} ************** Unclean shutdown detected. Please visit http://dochub.mongodb.org/core/repair for recovery instructions. ************* Sat Aug 11 22:57:50 [initandlisten] exception in initAndListen: 12596 old lock f ile, terminating Sat Aug 11 22:57:50 dbexit: Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close listening sockets.. . Sat Aug 11 22:57:50 [initandlisten] shutdown: going to flush diaglog... Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close sockets... Sat Aug 11 22:57:50 [initandlisten] shutdown: waiting for fs preallocator... Sat Aug 11 22:57:50 [initandlisten] shutdown: closing all files... Sat Aug 11 22:57:50 [initandlisten] closeAllFiles() finished Sat Aug 11 22:57:50 dbexit: really exiting now It seems that mongod is running on 32 bit. I have a 64 bit computer and I want to run mongodb in 64 bit enviroment. How do I do so?

  Read the article

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• EC2 configuration for medium load service on Django

  - by Luberg

  I have created a very basic Django application which puts an email to the database (Coming soon page for a startup). I launched a t1.micro instance to try out which load it can carry out. Nginx+FastCGI from Django+sqllite/postgres - tried both. blitz.io test gave me a pretty unhappy result (just 100 users within 1 minute): This rush generated 542 successful hits in 1.0 min and we transferred 809.01 KB of data in and out of your app. The average hit rate of 8.81/second translates to about 761,612 hits/day. You got bigger problems though: 87.28% of the users during this rush experienced timeouts or errors! I tried both to put varnish, disabled Debub mode in django and started fastcgi in threaded mode - nothing helps. This is not gonna be a super highload page - just a coming soon page to save email of subscribers, it should carry at least 500-1000 users at the same time in peak... I believe t1.micro is super small for that, but I also have tried small instance - not better result.. Please let me know should I use something different from Amazon EC2, or to pick smth better than t1.micro, or I that is definetely a configuration issues?...

  Read the article

• Unable to load Windows after using EasyBCD to Reset bcd [duplicate]

  - by johnny

  This question already has an answer here: How can I repair the Windows 8 EFI Bootloader? 9 answers My windows installation was working perfectly fine until i clicked "Reset BCD" in EasyBCD in Windows 8. After clicking that EasyBCD told me to add Win 8 entry via Add Entry Menu so i did. After restart, win 8 would not start. Neither would recovery F11. Attempts i made to Restore : Ran boot-repair from ubuntu live cd several time. Used Win8 system recovery disc created via virtualbox with win 8 preview iso. Automated repair from Win8 system recovery disc Ran following commands from cmd started from Win8 system recovery disc bootrec /fixmbr Result : Success message bootrec /rebuildbcd Result : after hitting (Y) "The requested system device cannot be found" System refresh started from Win8 system recovery disc gives error that device is locked. System reset started from Win8 system recovery disc gives error that required partition or device is missing or not accessible. Used automated repair from EasyRE disc. It gave success message. Used Fix boot problem from Macrium reflect winPE repair disc. Copied Recovery partition to usb. Booting from usb gave this error Your PC needs to be repaired. Error Code : 0XC000000f Press Enter to try again Press F8 for Startup Settings F8 & Enter does nothing I cannot install WIn7 or Win 8, error it gives : "windows cannot be installed on this disk. The selected disk is of the GPT partition style."

  Read the article

• Windows 7 hangs on black screen for a while after log in

  - by steini

  I get the welcome screen. I click on my user and get the "logging on" screen. After that all I get is a black screen with a mouse cursor. I can't even start task manager. No ctrl+alt+del or ctrl+shift+escape. It stays like this for about 10 minutes, then the desktop finally starts loading. According to the hdd led on my case, windows isn't even trying to access the hard drive for that whole time. It's just hanging doing nothing it seems. What I have tried: Uninstalled video driver and removed leftovers with driver sweeper Disabled all startup programs and non microsoft services Loaded "last known good configuration" Ran the alleged "black screen fix" from prevx against my best judgement (don't really like running random exes without knowing what they do at all) None of that works. I can boot into safe mode normally. My specs: i7 920 Gigabyte X58-UD3R Gigabyte HD5870 1GB 12GB Mushkin Silverline 1333MHz Windows 7 Ultimate x64 I'm also having another problem which I suspect is related. After I have gotten the computer up and running, everything works perfectly, but when it's been on for a while it starts behaving strangely when changing display modes. When I start up a game or anything that changes the screen resolution the computer freezes for about a minute every time until I reboot again. I think this is probably related to the black screen problem. Just thought I'd check to see if anyone has had the same problem. Let me know if I should post any more details about my system to help diagnose this. Thanks in advance.

  Read the article

• Booting an Asus EeePC from a LiveCD USB stick

  - by Bryan

  I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >