Search Results

Search found 19964 results on 799 pages for 'daniel key'.

Page 169/799 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

  • Cannot browse ipv4 websites (OpenVPN )

    - by user1494428
    I have set up an openVPN tunnel on my VPS (OpenVZ - Ubuntu 12.04). The problem is when I'm connected to the vpn, I can only browse websites which support ipv6 like google. Ipv4 sites aren't loading (no error, just waiting indefinitely). http://whatismyv6.com/ reports me that I've an ipv6 address, so I guess this is the problem. Server configuration: dev tun server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem push "route 10.8.0.0 255.255.255.0" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" push "redirect-gateway def1" comp-lzo persist-tun persist-key status openvpn-status.log log /var/log/openvpn.log verb 3 Client configuration: client remote xx.xx.xx.xx 1194 dev tun comp-lzo ca ca.crt cert client1.crt key client1.key redirect-gateway def1 verb 3 I have configured NAT with this command: iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -j SNAT --to xx.xx.xx.xx Can someone explain me how I can make it works (forcing ipv4?) I had the same problem with another vps and I also tried on another client (All Windows 7).

    Read the article

  • Can't connect to EC2 instance Permission denied (publickey)

    - by Assad Ullah
    I got this when I tried to connect my new instace (UBUNTU 12.01 EC2) with my newly generated key sh-3.2# ssh ec2-user@**** -v ****.pem OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to **** [****] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /var/root/.ssh/id_rsa type -1 debug1: identity file /var/root/.ssh/id_rsa-cert type -1 debug1: identity file /var/root/.ssh/id_dsa type -1 debug1: identity file /var/root/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '****' is known and matches the RSA host key. debug1: Found key in /var/root/.ssh/known_hosts:4 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /var/root/.ssh/id_rsa debug1: Trying private key: /var/root/.ssh/id_dsa debug1: No more authentication methods to try.

    Read the article

  • Restoring Windows 2008 Server X86 and X64

    - by rihatum
    Restoring Windows 2008 Server (Domain Controller) We are using Backup Exec System Recovery 2010 to Image our DC. Now this software has a feature to convert the backup into a vmware or hyper-v VM I have also used disk2vhd to convert one of our dc's to a vhd and when I connected it into Hyper-V, it booted fine, I can login - BUT :-) As soon as I login, I get the activation error, that change product key, this product key isn't good for this machine etc. Question is : When in a real recovery situation, what would be the procedure to restore it either virtual or onto a physical box but be able to login and change product key etc ? In this scenario its just locked down and I cant' do anything, if this is the case, how would I replicate my production environment via these tools ? Any Ideas ? Will be grateful for some real world examples here. Same thing happens with our exchange backup / test restore either physical or virtual, can login but nothing else. Now we don't have the keys as they are OEM keys and just wondering what will happen in a real scenario, would we be purchasing another KEY or using the OEM key on our new server ? This is a test environment I am trying to create by restoring our backups either into hyper-v or physical test machines. Also, If I build up a machine (Server 2008) in a VM (Hyper-V), How can I restore just the system state backup of my DC into it ? will that give me the activation error too ? even though I would use the TRIAL ISOs provided by Microsoft ? Kind regards

    Read the article

  • Fastest way to parse big json android

    - by jem88
    I've a doubt that doesn't let me sleep! :D I'm currently working with big json files, with many levels. I parse these object using the 'default' android way, so I read the response with a ByteArrayOutputStream, get a string and create a JSONObject from the string. All fine here. Now, I've to parse the content of the json to get the objects of my interest, and I really can't find a better way that parse it manually, like this: String status = jsonObject.getString("status"); Boolean isLogged = jsonObject.getBoolean("is_logged"); ArrayList<Genre> genresList = new ArrayList<Genre>(); // Get jsonObject with genres JSONObject jObjGenres = jsonObject.getJSONObject("genres"); // Instantiate an iterator on jsonObject keys Iterator<?> keys = jObjGenres.keys(); // Iterate on keys while( keys.hasNext() ) { String key = (String) keys.next(); JSONObject jObjGenre = jObjGenres.getJSONObject(key); // Create genre object Genre genre = new Genre( jObjGenre.getInt("id_genre"), jObjGenre.getString("string"), jObjGenre.getString("icon") ); genresList.add(genre); } // Get languages list JSONObject jObjLanguages = jsonObject.getJSONObject("languages"); Iterator jLangKey = jObjLanguages.keys(); List<Language> langList = new ArrayList<Language>(); while (jLangKey.hasNext()) { // Iterate on jlangKey obj String key = (String) jLangKey.next(); JSONObject jCurrentLang = (JSONObject) jObjLanguages.get(key); Language lang = new Language( jCurrentLang.getString("id_lang"), jCurrentLang.getString("name"), jCurrentLang.getString("code"), jCurrentLang.getString("active").equals("1") ); langList.add(lang); } I think this is really ugly, frustrating, timewaster, and fragile. I've seen parser like json-smart and Gson... but seems difficult to parse a json with many levels, and get the objects! But I guess that must be a better way... Any idea? Every suggestion will be really appreciated. Thanks in advance!

    Read the article

  • Connection closed by remote host

    - by kidrobot
    I'm trying to connect to a server using a private key generated through cPanel and stored on my local machine, but I am getting the "Connection closed by remote host". Any ideas? XXXXX-computer-2:~ XXXX$ ssh -v -i /path/to/private/key [email protected] OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to xxx.com XX.XX.XX.XX] port 22. debug1: Connection established. debug1: identity file /path/to/private/key type -1 ssh_exchange_identification: Connection closed by remote host

    Read the article

  • Basic OpenVPN setup not working

    - by WalterJ89
    I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

    Read the article

  • mozilla browser hot keys?

    - by Roger22
    Hello, Where can i find the key combinations for some actions, in Mozilla Firefox? For example, Ctrl+L moves the cursor to the address bar. I wanna move the cursor in the Google search box, from the right-top position). Which key is associated with this? And some other key combinations? Thanks!

    Read the article

  • can't ssh from mac to windows (running ssh server on cygwin)

    - by Denise
    I set up an ssh server on a fresh windows 7 machine using the latest version of cygwin. Disabled the firewall. I can ssh into it from itself, from a different windows box (using winssh), and from a linux vm. In spite of that, I tried to ssh in from two different macs, and neither would let me! This is the debug output: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 3dbuild [172.18.4.219] port 22. debug1: Connection established. debug1: identity file /Users/Denise/.ssh/identity type -1 debug1: identity file /Users/Denise/.ssh/id_rsa type 1 debug1: identity file /Users/Denise/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5 debug1: match: OpenSSH_5.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '3dbuild' is known and matches the RSA host key. debug1: Found key in /Users/Denise/.ssh/known_hosts:43 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /Users/Denise/.ssh/identity debug1: Offering public key: /Users/Denise/.ssh/id_rsa Connection closed by [ip] It shows the same output, and fails at the same place, whether I have put my public key on the ssh server or not. Any help would be appreciated-- hopefully someone has run into this before?

    Read the article

  • windows 7 numlock issues with rdp causes machine to go crazy

    - by rphilli5
    After going through a few rdp sessions to xp machines, when I come back to my local machine it appears some setting has been tripped so every key I type is registered as one of the function/alt keys plus the key I type, causing windows to open and close windows randomly and other erratic behavior. Pressing windows key and numlock returns everything to normal. Any ideas what causes this. I have experienced this on multiple win 7 machines, but never in vista or xp.

    Read the article

  • Generating the escape sequences for terminal by ahk

    - by obeliksz
    I am trying to make an ahk for putty to send the keycodes that I want for some key combinations in order for my program to work over terminal too. For this I have an ahk already with some key combinations working properly by experimenting awfully much time from here and there, from key tables, etc but I still don't get, did not came up with a clear, logical method to calculate the escape key that I want. An example: ^F1::SendInput ^[O5P It gives 28 in my test prog. I see that for ^[1 I get 377 and for ^[2 376... and I see that there can be used letters out of the hexa numbers (A-F) and also ; and ~ or double [[ Do you understand how this works? Any good descriptive material for this? Thanks a lot!

    Read the article

  • Defining a function that is both a generator and recursive [on hold]

    - by user96454
    I am new to python, so this code might not necessarily be clean, it's just for learning purposes. I had the idea of writing this function that would display the tree down the specified path. Then, i added the global variable number_of_py to count how many python files were in that tree. That worked as well. Finally, i decided to turn the whole thing into a generator, but the recursion breaks. My understanding of generators is that once next() is called python just executes the body of the function and "yields" a value until we hit the end of the body. Can someone explain why this doesn't work? Thanks. import os from sys import argv script, path = argv number_of_py = 0 lines_of_code = 0 def list_files(directory, key=''): global number_of_py files = os.listdir(directory) for f in files: real_path = os.path.join(directory, f) if os.path.isdir(real_path): list_files(real_path, key=key+' ') else: if real_path.split('.')[-1] == 'py': number_of_py += 1 with open(real_path) as g: yield len(g.read()) print key+real_path for i in list_files(argv[1]): lines_of_code += i print 'total number of lines of code: %d' % lines_of_code print 'total number of py files: %d' % number_of_py

    Read the article

  • Security when, ssh Private keys are lost

    - by Shree Mandadi
    Cant explain my problem enough with words, Let me take an example.. and please multiple the complexity by a 100 for the Solution. User-A has two ssh private keys, and over time has used this public key on a number of servers He lost one of them, and has created a new pair. How does User-A, inform me (Sys Admin), that he has lost his key, and How do I manage all the servers to which he had access to (I do not have a list, of all Servers that User-A has access to). In other words, How do I recall, the public key associated with this Private key. REF: In the LDAP based Authentication, All Servers would communicate with a single Server repository for Authentication, and If I remove acess or modify the password on the Server, all Systems that use this LDAP for Authentication are secured, when User-A loses his password..

    Read the article

  • Keytool and SSL Apache config

    - by Safari
    I have a question about SSL certificate... I have generate a certificate using this keytool command.. keytool -genkey -alias myalias -keyalg RSA -keysize 2048 and I used this command to export the certificate keytool -export -alias myalias -file certificate.crt So, I have a file .crt Now I would to configure my Apache ssl module. I need to use keytool...At the moment I can't to use Openssl How can I configure the module if I have only this certificate.crt file? I see these sections in my ssl.conf # Server Certificate: # Point SSLCertificateFile at a PEM encoded certificate. If # the certificate is encrypted, then you will be prompted for a # pass phrase. Note that a kill -HUP will prompt again. A new # certificate can be generated using the genkey(1) command. #SSLCertificateFile /etc/pki/tls/certs/localhost.crt # Server Private Key: # If the key is not combined with the certificate, use this # directive to point at the key file. Keep in mind that if # you've both a RSA and a DSA private key you can configure # both in parallel (to also allow the use of DSA ciphers, etc.) #SSLCertificateKeyFile /etc/pki/tls/private/localhost.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt How can I configure the correct section?

    Read the article

  • Tomato VPN connect but cannot ping LAN IP

    - by David Hamilton
    I've setup TomatoVPN using these settings on the server: TAP UDP 1194 Client address pool 10.10.9.1 -10.10.9.254 LAN clients are configured with 10.10.10.x I can connect from a remote client, but pinging anything in the 10.10.10.x results in a "Destination Host Unreachable" error. Here's my client configuration script: remote x.x.x.x 1194 client dev tap0 proto udp resolv-retry infinite nobind persist-key persist-tun float ca ca.crt cert client1.crt key client1.key ns-cert-type server Any suggestions as how I can make this properly bridge the two networks?

    Read the article

  • OpenVPN Configuration - Windows 7 client & debian server

    - by Guillaume
    I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

    Read the article

  • XNA hlsl tex2D() only reads 3 channels from normal maps and specular maps

    - by cubrman
    Our engine uses deferred rendering and at the main draw phase gathers plenty of data from the objects it draws. In order to save on tex2D calls, we packed our objects' specular maps with all sorts of data, so three out of four channels are already taken. To make it clear: I am talking about the assets that come with the models and are stored in their material's Specular Level channel, not about the RenderTarget. So now I need another information to be stored in the alpha channel, but I cannot make the shader to read it properly! Nomatter what I write into alpha it ends up being 1 (255)! I tried: saving the textures in PNG/TGA formats. turning off pre-computed alpha in model's properties. Out of every texture available to me (we use Diffuse map, Normal Map and Specular Map) I was only able to read alpha successfully from the Diffuse Map! Here is how I add specular and normal maps to my model's material in the content processor: if (geometry.Material.Textures.ContainsKey(normalMapKey)) { ExternalReference<TextureContent> texRef = geometry.Material.Textures[normalMapKey]; geometry.Material.Textures.Remove("NormalMap"); geometry.Material.Textures.Add("NormalMap", texRef); } ... foreach (KeyValuePair<String, ExternalReference<TextureContent>> texture in material.Textures) { if ((texture.Key == "Texture") || (texture.Key == "NormalMap") || (texture.Key == "SpecularMap")) mat.Textures.Add(texture.Key, texture.Value); } In the shader I obviously use: float4 data = tex2D(specularMapSampler, TexCoords); so data.a is always 1 in my case, could you suggest a reason?

    Read the article

  • How to get list of defined shortcut keys in the Start menu?

    - by Peter Mortensen
    How can I find out which keyboard shortcuts are defined inside the Start menu? And what shortcuts they are assigned to? Platform: Windows XP SP2 64 bit. Example: I open my main Visual Studio solution with a shortcut key, Ctrl+Alt+M. This is setup by having a shortcut inside the Start menu with: Target: "D:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe" D:\dproj\MSQall\MSQuant\MSQuant.sln Shortcut key: Ctrl+ALT+M If a new shortcut is added and its shortcut key is also set to Ctrl+Alt+M then there are now two shortcuts with the same shortcut key (conflict). To prevent this it would be nice to know which shortcut keys are already assigned and to which shortcuts.

    Read the article

  • What kind of SSL Cert do I need and where do I get it?

    - by chacham15
    I want to have subdomains with SSL within my domain. The main difference is that each subdomain is hosted by a different person with a different public key/private key pair. Let me illustrate with an example: User send his public key and requests subdomain from foo.com User is added and assigned subdomain bar (bar.foo.com). Users public key is stored for future validation against bar.foo.com User goes to bar.foo.com and see's a validated SSL connection. From what I gather, this means that I need to create a CA, which is fine. The problem is that from what I recall, a CA needs a special sort of SSL Cert. How do I go about getting this?

    Read the article

  • Exchange 2010 Hub Transport Role Fails - Registry Keys Missing?

    - by DKNUCKLES
    I've inherited an attempted Exchange 2010 implementation from a colleague that apparently failed. I've almost managed to bring it back from the dead, but the Hub Transport role fails to install with the following error [10/06/2012 02:30:44.0119] [2] Beginning processing Set-LocalPermissions -Feature:'Bridgehead' [10/06/2012 02:30:44.0166] [2] [ERROR] Unexpected Error [10/06/2012 02:30:44.0166] [2] [ERROR] The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". [10/06/2012 02:30:44.0182] [2] Ending processing Set-LocalPermissions [10/06/2012 02:30:44.0182] [1] The following 1 error(s) occurred during task execution: [10/06/2012 02:30:44.0182] [1] 0. ErrorRecord: The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". [10/06/2012 02:30:44.0182] [1] 0. ErrorRecord: System.ArgumentException: The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.GetTargetRegistryKey(XmlNode targetNode) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.ChangePermissions[TTarget,TSecurity,TAccessRule,TRights](XmlNode targetNode, Dictionary`2 rightsDictionary, GetTarget`1 getTarget, GetOrginalPermissionsOnTarget`2 getOrginalPermissionsOnTarget, SetPermissionsOnTarget`2 setPermissionsOnTarget, CreateAccessRule`2 createAccessRule, AddAccessRule`2 addAccessRule, RemoveAccessRuleAll`1 removeAccessRuleAll) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.SetPermissionsOnCurrentLevel[TTarget,TSecurity,TAccessRule,TRights](XmlNode permissionSetNode, String targetType, Dictionary`2 rightsDictionary, GetTarget`1 getTarget, GetOrginalPermissionsOnTarget`2 getOrginalPermissionsOnTarget, SetPermissionsOnTarget`2 setPermissionsOnTarget, CreateAccessRule`2 createAccessRule, AddAccessRule`2 addAccessRule, RemoveAccessRuleAll`1 removeAccessRuleAll) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.SetPermissionsOnCurrentLevel(XmlNode permissionSetNode) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.SetFeaturePermissions(String feature) at Microsoft.Exchange.Management.Deployment.SetLocalPermissions.InternalProcessRecord() [10/06/2012 02:30:44.0197] [1] [ERROR] The following error was generated when "$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead" " was run: "The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE".". [10/06/2012 02:30:44.0197] [1] [ERROR] The registry key "SOFTWARE\Microsoft\ExchangeServer\v14\Transport" does not exist under "HKEY_LOCAL_MACHINE". [10/06/2012 02:30:44.0197] [1] [ERROR-REFERENCE] Id=BridgeheadLocalPermissionsComponent___2e2dbc2a97cb4429bc2074edc50bedbd Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup [10/06/2012 02:30:44.0197] [1] Setup is stopping now because of one or more critical errors. [10/06/2012 02:30:44.0197] [1] Finished executing component tasks. [10/06/2012 02:30:44.0244] [1] Ending processing Install-BridgeheadRole I've been unable to find any documentation on how to resolve this issue. Any help would be appreciated.

    Read the article

  • Ubuntu SSH issue

    - by palani
    0 Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • Ubuntu SSH issue

    - by palani
    Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • How to push to github from a server account with multiple users?

    - by kirdie
    We have a web server which contains a web application stored as a github project. Now all of us can push from our local machines to github and then pull on the server but sometimes we want to make small changes and immediately see the effect so it would be great to be able to push at the server too. Now I created an ssh key for the server but I don't want to add the servers ssh key to my github account because then all github actions done from the server are counted to my account. Is it possible to add the ssh key to the github web application project without creating a new user for the server and what is the best practice for this situation? I also don't want to copy my private key to the server obviously.

    Read the article

  • mozilla firefox hot keys

    - by Roger22
    Hello, Where can i find the key combinations for some actions, in Mozilla Firefox? For example, Ctrl+L moves the cursor to the address bar. I wanna move the cursor in the Google search box, from the right-top position). Which key is associated with this? And some other key combinations? Thanks!

    Read the article

  • OpenVPN route missing

    - by dajuric
    I can connect to an OpenVPN server from Windows without any problems. But when I try to connect from Ubuntu 12.04 (start OpenVPN) I receive the following: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options SERVER IP: 161.53.X.X internal network: 10.0.0.0 / 8 What I need to do ? client configuration: client dev tap proto udp remote 161.53.X.X 1194 resolv-retry infinite nobind ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 server conf: local 161.53.X.X port 1194 proto udp dev tap dev-node OpenVPN ca ca.crt cert server.crt key server.key # This file should be kept secret dh dh1024.pem # DHCP leases addresses to clients server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 10.0.0.1 255.255.0.0" client-to-client duplicate-cn keepalive 10 120 comp-lzo verb 6

    Read the article

  • Xmodmap configuration

    - by Krishna S
    On my Debian Linux machine Ctrl+Alt+F1 is bound to a virtual terminal. I can see the corresponding entry by running xmodmap -pke keycode 67 = F1 XF86_Switch_VT_1 F1 XF86_Switch_VT_1 Per this thread, which I might add is consistent with what I've read elsewhere, the columns on the right hand side of = correspond to key, Shift+key, AltGr+key and Shift+AltGr+key. Given that, I don't understand how the keycode mapping for F1 (above) works for Ctrl+Alt+F1. It seems it should really be either Shift+F1 or Shift+AltGr+F1? Here's the output of xmodmap -pm on my machine: shift Shift_L (0x32), Shift_R (0x3e) lock Caps_Lock (0x25) control Control_L (0x42), Control_R (0x69) mod1 Alt_L (0x40), Alt_R (0x6c), Meta_L (0xcd) mod2 Num_Lock (0x4d) mod3 mod4 Super_L (0x85), Super_R (0x86), Super_L (0xce), Hyper_L (0xcf) mod5 ISO_Level3_Shift (0x5c), Mode_switch (0xcb) Can anybody explain it?

    Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >