Search Results

Search found 12316 results on 493 pages for 'my almost daily news'.

Page 169/493 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

  • Redirect requests only if the file is not found?

    - by ZenBlender
    I'm hoping there is a way to do this with mod_rewrite and Apache, but maybe there is another way to consider too. On my site, I have directories set up for re-skinned versions of the site for clients. If the web root is /home/blah/www, a client directory would be /home/blah/www/clients/abc. When you access the client directory via a web browser, I want it to use any requested files in the client directory if they exist. Otherwise, I want it to use the file in the web root. For example, let's say the client does not need their own index.html. Therefore, some code would determine that there is no index.html in /home/blah/www/clients/abc and will instead use the one in /home/blah/www. Keep in mind that I don't want to redirect the client to the web root at any time, I just want to use the web root's file with that name if the client directory has not specified its own copy. The web browser should still point to /clients/abc whether the file exists there or in the root. Likewise, if there is a request for news.html in the client directory and it DOES exist there, then just serve that file instead of the web root's news.html. The user's experience should be seamless. I need this to work for requests on any filename. If I need to, for example, add a new line to .htaccess for every file I might want to redirect, it rather defeats the purpose as there is too much maintenance needed, and a good chance for errors given the large number of files. In your examples, please indicate whether your code goes in the .htaccess file in the client directory, or the web root. Web root is preferred. Thanks for any suggestions! :)

    Read the article

  • Undesired Output of Crontab Job Using CURL

    - by Russell C.
    I have written a perl script that runs as a daily crontab job that uploads files to Amazon S3 via CURL. I want the output of the cron job emailed to me which works fine but I don't want that email to include messages related to the CURL upload (only those message my script is outputting). Here are the CURL related messages I'm seeing in the daily email right now: % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 230M 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 230M 0 0 0 544k 0 1519k 0:02:35 --:--:-- 0:02:35 1807k 0 230M 0 0 0 1744k 0 1286k 0:03:03 0:00:01 0:03:02 1342k 1 230M 0 0 1 2880k 0 1219k 0:03:13 0:00:02 0:03:11 1250k 1 230M 0 0 1 4016k 0 1198k 0:03:17 0:00:03 0:03:14 1218k 2 230M 0 0 2 5168k 0 1186k 0:03:19 0:00:04 0:03:15 1202k 2 230M 0 0 2 6336k 0 1181k 0:03:19 0:00:05 0:03:14 1157k 3 230M 0 0 3 7488k 0 1177k 0:03:20 0:00:06 0:03:14 1147k 3 230M 0 0 3 8592k 0 1167k 0:03:22 0:00:07 0:03:15 1142k 4 230M 0 0 4 9744k 0 1166k 0:03:22 0:00:08 0:03:14 1145k 4 230M 0 0 4 10.6M 0 1163k 0:03:23 0:00:09 0:03:14 1142k 5 230M 0 0 5 11.7M 0 1161k 0:03:23 0:00:10 0:03:13 1140k 5 230M 0 0 5 12.8M 0 1158k 0:03:23 0:00:11 0:03:12 1133k 6 230M 0 0 6 13.9M 0 1155k 0:03:24 0:00:12 0:03:12 1138k 6 230M 0 0 6 15.0M 0 1155k 0:03:24 0:00:13 0:03:11 1138k 7 230M 0 0 7 16.1M 0 1152k 0:03:25 0:00:14 0:03:11 1131k 7 230M 0 0 7 17.2M 0 1152k 0:03:25 0:00:15 0:03:10 1132k 7 230M 0 0 7 18.4M 0 1152k 0:03:24 0:00:16 0:03:08 1140k I am using a simple Perl system() call to invoke CURL. Does anyone know what command line argument I can supply CURL to turn off the reporting of the upload progress? Thanks in advance for your help!

    Read the article

  • How can I keep curl output out of mail from my cronjob?

    - by Russell C.
    I have written a Perl script that runs as a daily crontab job that uploads files to Amazon S3 via CURL. I want the output of the cron job emailed to me which works fine but I don't want that email to include messages related to the CURL upload (only those message my script is outputting). Here are the CURL related messages I'm seeing in the daily email right now: % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 230M 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 230M 0 0 0 544k 0 1519k 0:02:35 --:--:-- 0:02:35 1807k 0 230M 0 0 0 1744k 0 1286k 0:03:03 0:00:01 0:03:02 1342k 1 230M 0 0 1 2880k 0 1219k 0:03:13 0:00:02 0:03:11 1250k 1 230M 0 0 1 4016k 0 1198k 0:03:17 0:00:03 0:03:14 1218k 2 230M 0 0 2 5168k 0 1186k 0:03:19 0:00:04 0:03:15 1202k 2 230M 0 0 2 6336k 0 1181k 0:03:19 0:00:05 0:03:14 1157k 3 230M 0 0 3 7488k 0 1177k 0:03:20 0:00:06 0:03:14 1147k 3 230M 0 0 3 8592k 0 1167k 0:03:22 0:00:07 0:03:15 1142k 4 230M 0 0 4 9744k 0 1166k 0:03:22 0:00:08 0:03:14 1145k 4 230M 0 0 4 10.6M 0 1163k 0:03:23 0:00:09 0:03:14 1142k 5 230M 0 0 5 11.7M 0 1161k 0:03:23 0:00:10 0:03:13 1140k 5 230M 0 0 5 12.8M 0 1158k 0:03:23 0:00:11 0:03:12 1133k 6 230M 0 0 6 13.9M 0 1155k 0:03:24 0:00:12 0:03:12 1138k 6 230M 0 0 6 15.0M 0 1155k 0:03:24 0:00:13 0:03:11 1138k 7 230M 0 0 7 16.1M 0 1152k 0:03:25 0:00:14 0:03:11 1131k 7 230M 0 0 7 17.2M 0 1152k 0:03:25 0:00:15 0:03:10 1132k 7 230M 0 0 7 18.4M 0 1152k 0:03:24 0:00:16 0:03:08 1140k I am using a simple Perl system() call to invoke CURL. Does anyone know what command line argument I can supply CURL to turn off the reporting of the upload progress?

    Read the article

  • Handling RSS Tags with NSXMLParser for iPhone

    - by MartinW
    I've found the following code for parsing through RSS but it does not seem to allow for nested elements: - (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName{ NSLog(@"ended element: %@", elementName); if ([elementName isEqualToString:@"item"]) { // save values to an item, then store that item into the array... [item setObject:currentTitle forKey:@"title"]; [item setObject:currentLink forKey:@"link"]; [item setObject:currentSummary forKey:@"summary"]; [item setObject:currentDate forKey:@"date"]; [item setObject:currentImage forKey:@"media:thumbnail"]; The RSS to used is: <item><title>Knife robberies and burglaries up</title> <description>The number of robberies carried out at knife-point has increased sharply and burglaries are also up, latest crime figures indicate</description> <link>http://news.bbc.co.uk/go/rss/-/1/hi/uk/7844455.stm</link> <guid isPermaLink="false">http://news.bbc.co.uk/1/hi/uk/7844455.stm</guid> <pubDate>Thu, 22 Jan 2009 13:02:03 GMT</pubDate><category>UK</category> <media:thumbnail width="66" height="49" url="http://newsimg.bbc.co.uk/media/images/45400000/jpg/_45400861_policegeneric_pa.jpg"/> </item> I need to extract the "url" element from the "media" tag. Thanks Martin

    Read the article

  • Read huge free text docs in one file for lucene indexing

    - by Jun
    I have heaps of free text news docs in one big file. The structure of each news doc is like: (Header line) Category, Doc1, Date (day, month, year) (body text) ... ... ... (Header line) Category, Doc2, Date (day, month, year) (body text) ... ... ... If I extract each doc from the big file, it costs too much time and not efficient. Therefore, I decide to read the file line by line and feed information to lucene the same time. I write c# code to index each doc to lucene like: Streamreader sr = new Streamreader(file); string line = ""; while((line = sr.ReadLine()) != null) { How can I tell this line is a doc header line from text line and get the metadata and all the text lines of a doc for lucene to index. Also, the text is read by OCR which can not give correct line-separating. Captions are mixed with content text iterate the process till the end of the file } with thanks

    Read the article

  • CURL request incomplete, suspect timeout but not sure.

    - by girlygeek
    I am currently using CURL via a php script running as daily cron to export product data in csv format from a site's admin area. The normal way of exporting data will be to go to the Export page in a browser, and set the configuration, then click on "export data" button. But as the number of products I am exporting is very large, and it takes more than 5-10 mins to export the data, I've decided to use php's curl function to mimic this on a daily basis via cron. Previously, it is working fine, but recently as I increased the number of products in the store by 500+, the script fails to return the exported data. Testing it manually via clicking on the "export" button in a browser, does return the data correctly. Thus there is no "timeout" issue with running the export in a browser manually. I've tested and by removing/decreasing the number of products (thus the time needed), the php-curl script works fine again when run from cron. So I suspect that it has something to do with timeouts issue, specifically with the curl function in php. I've set both CURLOPT_TIMEOUT and CURLOPT_CONNECTTIMEOUT to '0' respectively to try. In the php-curl script, I've also set "set_time_limit(3000)". But still it does not work, and the request will timeout, with the script failing to return with a complete set of csv data. Any help in helping me resolve/understand this issue will be much appreciated!

    Read the article

  • jQuery Mobile: How to run a callback-function before $.mobile.changePage?

    - by Jugi84
    I'm setting up a mobile app with jQuery Mobile and PhoneGap. What I want to do is that when I click link with id "news_link" I want jQuery to fetch data from database and put it to jQm's collapsible set. In my solution, I've wanted to use $.mobile.changePage inside callback functions because I want to wait until the data has been fetched and put inside the container before the code changes page. Here's the code: $(function() { $('#news_link').click(function(){ loadNewsFromDB(function(){ $.mobile.changePage( $("#news"), { transition: "slideup"} ); }); }); loadNewsFromDB is PhoneGap's SQLite database function which would fetch the data with more callback functions from database. The contents would be put to desired container with .html-function function loadNewsFromDB(){ //some code here theDB.transaction(function(tx) { tx.executeSql(sqlStr, [], onLoadNewsSuccess, onLoadNewsError); },onTxError, onTxSuccess); function onLoadNewsSuccess(tx, results){ //some code here $("#newsSet").html(htmlCodeAndContentToPut); Html is jQm's basic ui-modules: <!-- some html code here --!> <div data-role="page" id="news"> <div data-role="content"> <div id="newsSet" data-role="collapsible-set" data-mini="true"> With debugging I know that the code work up until it works very well unti it arrives to $.mobile.changePage-function. Somehow it doesn't change the page. I've checked the function it works well in other occasions, but not inside callback-functions. I would be very grateful if someone would give me a hand am I not seeing something obviously wrong or is something more specific? What other workarounds there is for fetching the data from SQLite, waiting for data to be fetched, putting the data to container and then changing the pages?

    Read the article

  • How do I choose what and when to cache data with ob_start rather than query the database?

    - by Tim Santeford
    I have a home page that has several independent dynamic parts. The parts consist of a list of recent news from the company, a site statistics panel, and the online status of certain employees. The recent news changes monthly, site statistics change daily, and online statuses change on a per minute bases. I would like to cache these panels so that the db is not hit on every page load. Is using ob_start() then ob_get_contents() to cache these parts to a file the correct way to do this or is there a better method in PHP5 for doing this? In asking this question I'm trying to answer these additional questions: How can I determine the correct approach for caching this data without doing extensive benchmarking? Does it make sense to cache these parts in different files and then join them together per requests or should I re-query the data and cache once per minute? I'm looking for a rule of thumb for planning pages and for situations where doing testing is not cost effective (The client is not paying enough for it I mean). Thanks!

    Read the article

  • Trouble installing R-2.15.2 on Fedora 14

    - by user1896007
    I need to install R-2.15.2, the latest version. I tried using blah> sudo yum install R to install R, but for whatever reason (maybe because it's an old version of Fedora?) my system thinks R version 13 is the most recent. So, I downloaded the .tar.gz file from R's site and used the following: blah> tar -xvf R-2.15.2.tar.gz This successfully unzipped the file. I then ran: blah> ./configure blah/R-2.15.2> ls ChangeLog COPYING Makeconf.in ONEWS src VERSION-NICK config.log doc Makefile.fw OONEWS SVN-REVISION config.site etc Makefile.in po tests configure INSTALL NEWS README tools configure.ac m4 NEWS.pdf share VERSION As you can see, makefiles are present. However, when I run "make" within the R folder, I get the following error: blah/R-2.15.2> make make: No targets specified and no makefile found. Stop. Is there any way I can fix this issue? I'm guessing people will recommend updating Fedora, but is there another way?

    Read the article

  • Unable to change two things about a single row in mysql with php

    - by user1624005
    Here's the code: $id = intval($_POST['id']); $score = "'" . $_POST['score'] . "'"; $shares = "'" . $_POST['shares'] . "'"; $conn = new PDO('mysql:host=localhost;dbname=news', 'root', ''); $stmt = $conn->prepare("UPDATE news SET 'shares' = :shares, 'score' = :score WHERE id = :id"); $stmt -> execute(array( 'shares' => $shares, 'score' => $score, 'id' => $id )); And it doesn't work. I am unsure as to how I would see the error that I assume mysql is giving somewhere, and I've tried everything I could think of. Using double quotes and adding the variables into the statement right away. Adding single quotes to shares and score. How am I supposed to be doing this?

    Read the article

  • Sony Ericsson Windows driver problem

    - by alex
    I've installed Update Service and MediaGo for my Sony Ericsson phone but one of the drivers that was installed along with the software is causing problems in Windows 7 x64. Looking in the Event Log I see the following warning: Detected unrecognized USB driver (\Driver\seehcri) This is the driver corresponding to the Sony Ericsson seehcri Control Device. The failure to recognize the USB driver is causing problems with other services, namely the VMware USB Arbitration Service. It should normally start automatically but, due to the failure to recognize the seehcri USB driver, it fails with the following error: Error 31: A device attached to the system is not functioning. Disabling the driver has not helped at all. The VMWare service still refuses to start and I keep getting both warnings in the Event Log. I would like to remove the Sony Ericsson driver but unfortunately, that's not possible. Uninstalling the Sony Ericsson seehcri Control Device from Device Manager causes Windows to almost completely freeze up while trying to look for drivers for unrecognized hardware. Windows tries over and over again to locate and install drivers for an Unknown device, failing every time. Looking in Device Manager, it simply fills up with hundreds of unknown devices, also using up the CPU to almost 85% in the process. What should I do? How can I safely remove the driver without causing Windows to look for a new driver?

    Read the article

  • Timeline chart in Excel

    - by Axarydax
    Hi, I'd like to see a timeline of events from a database in a "timeline chart", that should look like this: http://i46.tinypic.com/sw3dj5.png - I've made me a small c# program that paints this onto a Bitmap, but that isn't the way to go. I have input data that has 3 fields: StartX EndX Y 2596 15008 1 5438 6783 2 5450 5453 4 5456 5459 4 5462 5466 4 5470 5474 4 5477 5657 5 5662 5665 4 5668 5671 4 As the picture shows, for each line I'd like to have a line from StartX to EndX with a Y value of Y. Stacked bar chart almost solves my problem, but I don't want to have a new line on the chart for every row, I have thousands of rows and I'd like to have X axis as the time axis, and view which events (Y is the type of the event) happened simultaneously. The image ( http://i46.tinypic.com/sw3dj5.png) I've generated with a simple C# program shows that the event SYSTEM was active all the time, and the events TECH and BREAK were almost exclusive, but had some overlaps. I'd like to at least know the correct direction which I should take; I'm lost in the multitude of Excel chart types. Thanks.

    Read the article

  • Crazy problem with Nginx, PHP5-FPM on Ubuntu

    - by Emmanuel
    I've been trying to get a domain from shared hosting to my new VPS. Everything was working just 100% fine, and then all of a sudden rewrites stopped working, pictures that should work started returning 404s. I've got no idea why, but for some reason on my site: http://www.onlythebible.com/ only the home page works, all the other pages depend on rewrites which were working perfectly fine at one stage, but all of a sudden stopped working. Some of the pictures like this url: http://www.onlythebible.com/bgsPreview/Matthew-8.10.jpg which doesn't use a rewrite throws a 404? I almost certain it was nothing to do with the nginx configuration. I've got suspicions that it could be something to do with php5-fpm? The funny thing is, all of a sudden it started working again. And then an hour or so later it broke again and has now gone back to only displaying the home-page and all of the links (and some of the pictures) are just showing 404s. Does anyone have an idea of what the problem might be? I'm pretty new to the whole Linux VPS thing, but this just seems very strange. *edit Here's a line from the error log which might shed some light on the problem: 2011/02/06 03:04:59 [error] 2873#0: *220 open() "/usr/local/nginx/html/bgsPreview/Matthew-8.10.jpg" failed (2: No such file or directory), client: 114.77.115.211, server: onlythebible.com, request: "GET /bgsPreview/Matthew-8.10.jpg HTTP/1.1", host: "www.onlythebible.com", referrer: "http://www.onlythebible.com/" I wonder why it's trying to find the file in /usr/local/nginx/html instead of the proper root which is /var/www/ etc... Oh, and for some reason it's just started working again... for how long I don't know. Another thing that was a bit weird, is that the pages on my website are pulled from a database. But when I edited the database, the pages didn't change... It's almost like they've been cached or something.

    Read the article

  • Does any Certificate Authority support both SAN and wildcards?

    - by nicholas a. evans
    My basic quandry is that wildcard certificates don't support subdomains of subdomains, nor do they help with alternate domain names. Basically, if my CN is example.com, I want a Subject Alternative Name field that looks roughly like so: DNS:example.com DNS*.example.com DNS:*.beta.example.com DNS:example.net DNS:*.example.net DNS:*.beta.example.net Using a self-signed cert, I verified that the browsers will work just fine with this. Unfortunately, none of the Certificate Authorities that I looked into (Thawte, GoDaddy, Verisign, Digicert) seemed to support both wildcard certs and Subject Alternative Name (sometimes referred to as "Multiple Domain UCC"). I even called up GoDaddy tech support to confirm. Is there a CA (trusted by 99% of browsers) that supports wildcards for the Subject Alternative Name? One little restriction: I'm saddled with Amazon EC2's single Elastic IP per instance limitation. Here are what I see as my backup plans: set up three extra EC2 instances, each configured for a different IP address and cert, and nginx reverse proxy from three of them into the app server(s) introduces latency(?), and even the cheapest EC2 instance isn't that cheap instead of dedicated reverse proxy instances, setup the four or more almost identical EC2 app servers, with nginx using the port to determine which cert to deliver, and use haproxy to distribute the traffic amongst themselves. complicated to configure and manage? I'm not using the cheapest EC2 instance type for my app servers. If I don't need 4+ app servers for the load, it raises the cost. set up an external server (outside of EC2) that doesn't have EC2's Elastic IP address restrictions, setup all of the alternate IP addresses and certificates on that server, and nginx reverse proxy from that server into the EC2 app servers. extra IP addresses are almost free (still need to pay for the server of course), but don't come with the robust "elasticity" that Amazon's Elastic IPs provide. even more latency than in the first scenario. Are these approaches crazy or reasonable? Do you have another one to suggest?

    Read the article

  • Linux bizarre memory report

    - by Igor Liner
    I took the following meminfo captures. I don't figure out how the free memory went from 8GB to almost 25GB, when only about 4GB of slab was freed. There was no change of the proccess memory consumption on time the meminfo output was taken. First meminfo with 8GB free memory: MemTotal: 66054256 kB MemFree: 8344960 kB Buffers: 1120 kB Cached: 30172312 kB SwapCached: 0 kB Active: 10795428 kB Inactive: 1914512 kB Active(anon): 10193124 kB Inactive(anon): 1441288 kB Active(file): 602304 kB Inactive(file): 473224 kB Unevictable: 26348912 kB Mlocked: 26348960 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 8886304 kB Mapped: 26383052 kB Shmem: 29097904 kB Slab: 6006384 kB SReclaimable: 3512404 kB SUnreclaim: 2493980 kB KernelStack: 15240 kB PageTables: 78724 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 33027128 kB Committed_AS: 44446908 kB VmallocTotal: 34359738367 kB VmallocUsed: 426656 kB VmallocChunk: 34325375716 kB HardwareCorrupted: 0 kB AnonHugePages: 7696384 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 6144 kB DirectMap2M: 2058240 kB DirectMap1G: 65011712 kB Second memory capture with almost 25GB free memory: MemTotal: 66054256 kB MemFree: 24949116 kB Buffers: 1120 kB Cached: 29085016 kB SwapCached: 0 kB Active: 10168904 kB Inactive: 1461156 kB Active(anon): 10168216 kB Inactive(anon): 1441956 kB Active(file): 688 kB Inactive(file): 19200 kB Unevictable: 26317328 kB Mlocked: 26317376 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 8861224 kB Mapped: 26351488 kB Shmem: 29066248 kB Slab: 1503440 kB SReclaimable: 232880 kB SUnreclaim: 1270560 kB KernelStack: 15256 kB PageTables: 79664 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 33027128 kB Committed_AS: 44418280 kB VmallocTotal: 34359738367 kB VmallocUsed: 426656 kB VmallocChunk: 34325375716 kB HardwareCorrupted: 0 kB AnonHugePages: 7665664 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 6144 kB DirectMap2M: 2058240 kB DirectMap1G: 65011712 kB

    Read the article

  • Broken Creative DTT3500 Digital

    - by djechelon
    Hello, many years ago I bought a Creative DTT3500 Digital surround speakers system. It's been a while since my home theatre started behaving strange. During the past 6 months, I have noticed that the amplifier needed some time before correctly playing digital audio. Until a couple of weeks ago, it needed up to 5 minutes of very noisy "warm up" before playing an "almost" clear audio. Today, I found that even using the analog input (completely disabling digital inputs) the noise persists. Powering off and on the speakers doesn't work. Now, it's reasonable that after almost 10 years, the amplifier got broken. My problem is that I can't simply replace the speakers with another kit from another brand, since 2 speakers in my room are placed in the back wall, with coaxial cables going under the floor but not completely inside a single tube. I mean, I have coaxial extension cables starting from the DTT3500 amplifier, going into the wall, then under the floor in a plastic cable tube, then exiting the tube (still under the floor), connecting to the male coaxial connector of the original cable supplied by Creative, and continuing up to the point close to my bed where the speakers are. I could replace the speakers **only as soon as the new speakers have the same coaxial to bi-polar cables that Creative ships with DTT3500 Another option might be "repairing the amplifier", but I don't know if it's feasible, what should I or a technician look for in the amplifier, and how much would it cost (is it worth to repair or buy a new kit considering the problem above? What do you suggest me to do, basing on the above observation? Thank you.

    Read the article

  • I used disk copy to clone my drive, now my windows 7 profile won't load correctly

    - by RzK
    I used easeuse disk copy, after acronis, clonezilla, windows image restore failed me. Basically it copys all sectors, I set it to skip bad sectors(40). The source drive works, it just gave me a couple errors and stopped booting at one point. The drive is an identical copy, minus 40 bad errors. The drive is set to C and active partition, I rebuilt the boot order. I've ran sfc /scannow and ran chkdsk /r chkdsk found 20kb of bad sectors if I remember right. Now the issue I get is when I log into my profile which was saved right, I get a blank light blue wallpaper (non-license) explorer.exe is not running, and there are only 4 processes running in taskmanager, including taskmanager. I would try a repair install but CRTL-E would not open, nothing will open once I force start explorer.exe, almost like all services are down. What should I do? Fresh install is almost not a possibility I will try and fix this issue. sfc /scannow /offbootdir=c:\ /offwindir=c:\windows returns "Windows Resource Protection could not perform the requested operation"

    Read the article

  • nVidia performance with newer X and newer driver abysmal with Compiz

    - by Nakedible
    I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem.

    Read the article

  • NTFS: Deny all permissions for all files, except where explicitly added

    - by Simon
    I'm running a sandboxed application as a local user. I now want to deny almost all file system permissions for this user to secure the system, except for a few working folders and some system DLLs (I'll call this set of files & directories X below). The sandbox user is not in any group. So it shouldn't have any permissions, right? Wrong, because all "Authenticated Users" are a member of the local "Users" group, and that group has access to almost everything. I thought about recursively adding deny ACL-entries to all files and directories and remove them manually from X. But this seems excessive. I also thought about removing "Authenticated Users" from the "Users" group. But I'm afraid of unintended side-effects. It's likely that other things rely on this. Is this correct? Are there better ways to do this? How would you limit the filesystem permissions of a (very) non-trustworthy account?

    Read the article

  • Windows 3 Animated Background/Desktop/Wallpaper

    - by Synetech
    In the summer of 1995, I visited some family in Los Angeles. My uncle had a computer with Windows 3 (or some version thereof since Windows 95 had not been released yet). In Windows 3, there was no desktop or wallpaper like in later versions; instead you could set it to a simple pattern (still possible in later versions before XP) like hounds-tooth or bricks (interestingly, there seems to be next to nothing available on the Internet about this anymore; no screenshots and almost no pages). I recall being amused when I found a program (on the still young “world-wide web”) that would actually let you set an animated background. It was smooth and fluid and was quite an amazing thing at the time. If I recall correctly, it had several built-in animations including one of a light-orange-pink background over which storks flew towards the top-left, possibly with some light stuff floating in the “background” (they were actually animated and flapped their wings, not simply translated coordinates). The storks were somewhat simplified, black-line drawings. Over the years, I’ve tried finding it again a few times but never could. Worse, it’s become harder and harder over time as new programs came out and polluted the search results. I’m hoping that someone remembers this software and knows some useful information like the author or where to download it. (No, it’s not ScreenPaper. That was created in 1997 to let you set a screensaver as the Windows 95/NT4 background. This was at least two years earlier for Windows 3 and I’m almost certain it had these animations built-in—I don’t recall any stork screensavers for Windows 3.)

    Read the article

  • Which database to use and system/db administration by layman [closed]

    - by blah
    So my friend and I got briliant ;) idea for a business. Since it is not predictable whether it will work out or not, we decided to keep cost as low as possible to start with, in particular not to hire anyone. If it will work out as expected it will generate enough profit to hire professionals in few months. But for the first few months we'll be doing everything by ourselfs. He's a business/finance major, and I'm a software developer, so obviously I have to take care of IT :) It will be a webapp, written in python/django. My questions regarding this project: 1) What database should I choose? I'm experienced with oracle, and have been working with SQL Server for a while, but both of them are too expensive(at least now). It's a developer experience, I've never done any dba stuff. I'm looking for something free(as in beer). Looks like MySql or PostgreSQL are most popular in this sector. I would appreciate any comments on which db to choose. I'm open to any suggestions(it doesn't have to be MySql or Postgre). Here's what I know about data: It will be almost dates and numbers, a little bit of text. Searched mainly by dates. Data will almost never be updated, mostly inserted and browsed. From 30k to 300k new records/month. 2) Servers. My idea is to rent two dedicated servers. During normal operation one would be a web server(debian/apache), other would be a db server(debian/?). My recovery plan is to install everything on both, and in case of trouble with one of machines just run everything on the other one. Does it even makes sense? Any other tips appreciated. Thanks.

    Read the article

  • Excel file growing huge (>150 MB)

    - by Josh
    There is one particular Excel file that is used by a number of employees at my company. It is edited from both Excel 2003 and 2007, with the "Sharing" feature turned on to allow multiple writers at once. The file has a decent amount of data on several sheets with some basic formatting, and used to be about 6MB, which seems reasonable for its content. But after a few weeks of editing, the file grew to 10, then 20 MB, and eventually skyrocketed to more than 150 MB, even though it still has about the same amount of data as before. It now takes 5-10 minutes to open it, and that much time again to save it. The first time this happened, I copied the content of each sheet into a new, blank workbook, and saved the new workbook; this brought it back down to about 6MB. Now, it has blown up again. The workbook uses the "Data Validation" feature to limit the values in certain columns to the contents of a few named ranges. Copying all the data into a new workbook means re-setting up all the data validation, which is a pain and not something that we want to do every month. As a troubleshooting step, I tried saving the file in "XML Spreadsheet 2003" format, hoping to get some insight into what was being stored. Sure enough, the file was almost a gig, and almost all of the 10 million lines look like this: <NamedCell ss:Name="Z_21D5114F_E50C_46AC_AA4F_C3FF540C717F_.wvu.FilterData"/> <NamedCell ss:Name="Z_1EE2BA5E_3011_4F9A_8ACD_E58835250FC4_.wvu.FilterData"/> <NamedCell ss:Name="Z_1E3BDCEA_6A72_4ECC_BF4F_7B03CC66181E_.wvu.FilterData"/> I've seen a few VBScripts online to manage and enumerate named cells that are hidden in Excel's built-in interface, though I wonder how they'd handle my 10 million named cells. What I really need, though, is an understanding of why this keeps happening. What actions in excel could be causing this?

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • Why do I often have to refresh pages I navigate to once for them (or content in them) to load?

    - by GetOutOfBox
    I have noticed a bizarre pattern when using my PC, that when I open a link to a website, it often will often take a very long time to load, or time out. Sometimes content on the website will be drawn, but again, it seems to get "stuck" for an unusual amount of time before finishing. Most affected is Youtube; almost every time I navigate to a youtube video from another website such as Google, the video will not begin playing, but will instead just display the player controls with a black screen where the video should be and the buffering symbol, usually before displaying an error such as "The video failed to load". The unusual part of this problem is that whenever this happens, refreshing the page always causes it to load almost immediately the second time around, without any problems. Note that I'm not talking about how some browsers will dump whatever has been cached to the "pallet" briefly when the page is refreshed or loading stopped; but that the second time loading the website being faster. I have done my best to rule out some of the obvious causes: My Windows 7 desktop computer is the only device that seems to be affected. I use Firefox on it (latest version, flash updated, etc). My connection has more than enough bandwidth (30 megabits down, 4 up), and I've even tried QoSing all other devices to make sure this isn't happening due to usage spikes. Wireshark is not showing any clearly unusual network activity (i.e frequently dropped packets).

    Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >