Search Results

Search found 90811 results on 3633 pages for 'hyper v server 2012 r2'.

Page 1707/3633 | < Previous Page | 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714  | Next Page >

• Alerting when a RAID Array disk fails locally on VMWare ESX or ESXi System

  - by Tim K

  With ESX and ESXi, we recently had two systems where that the boot partition became degraded due to a failed disk. The only alert we managed to capture was the visual alert on the Dell servers. We failed to received any electronic alerts regarding the failed or degraded array. Does anyone have any experience with monitoring for these types of failures? In both cases, the servers were running in a RAID 5 SCSI configuration (5 disks on one system, 3 disks on another) which if we were running a Windows Server OS, we would have had an alert created in the Eventviewer. Where would I begin to look for this solution. Can it be configured in VCenter or vFoglight?

  Read the article

• ProFTPd not in boot: Debian

  - by 50ndr33

  I just configured my new VPS with Apache, PHP, MySQL and ProFTPd. I wanted to install a smtp server, but I was advised to do a apt-get upgrade first. I did this, and I got up a blue screen where I could choose between two alternatives. It said something about GRUB 2 installer. I chose the alternative that was already selected, the topmost. I chose not to update the GRUB2, and use the old one that was installed. Now, ProFTPd doesn't start in boot anymore. I have to /etc/init.d/proftpd start every time. How do I fix this? Should I have chosen to update GRUB2? Should I do apt-get upgrade again and try to do the same GRUB2 installer again?

  Read the article

• DDoS attacks to PBX

  - by user316687

  I'm wondering if DDOS attacks to PBX or telecommunications systems is possibe real. According to this links: http://threatpost.com/en_us/blogs/firm-sees-more-ddos-attacks-aimed-telecom-systems-073112 http://news.softpedia.com/news/DDOS-Attacks-Against-Telecom-Systems-Cost-as-Little-as-20-16-Per-Day-284875.shtml it is possible. There are DDOs attacks to web servers, which mostly give them so much concurrent loads or connections that service get unavailable. Many government or non-profit organizations that suffered this kind of attacks, eventually could choose to shutdown their web server and that's it, waiting for these attacks to end. For a DDOs attacks to PBX, I imagine that it would result in telephones getting busy or ringing all the time unstoppably. This kind of attack could really damage any kind organization. Is it possible to do that or are we just in the beginnings?

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• What are the requirements for gettings django translations to work?

  - by Espen Christensen

  Hi, I am hosting several djangosites on a CentOS 5 box. But I'm having difficulties with translations. So first i had to upgrade the gettext package from 0.14 to 0.16, but that didn't help. Now i can make and compile tranlsations files with the managment commands, but the translations does not show. I am sure that the translation files are located at the right place since they work with the same setup on a local installation, and django's own translation files does not work. (e.g the admin is not translated). What could i be missing in my server setup that makes this happen?

  Read the article

• How to integrate monit into web app deployment process

  - by shabunc

  I have: Tomcat with webapp deployed via mvn tomcat:redeploy. Monit, pinging the host and restarting server if ping failed. The thing is there in a moment during the redeployment when ping will fail - and this is normal, actually. So, the question is - what is the best way to teach monit to consider the fact of redeployment and not to confuse it with "real" black outs. This is of course an issue of balance between elegance, ease of implementation and scalability. The most straightforward solution I can think of - is just to shutdown monit before deployment and start it up after once again. But this if far from elegance I guess.

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

• ffmpeg encoding on QuadCore

  - by Gotys

  I am trying to push my server's CPU cores to the max, but no success. Encoding 2-pass style, set my "-threads" to 128 . When running 2nd pass , the CPU seems to be at 98% usage, but first pass run totally ignores "-threads" option. Using libx264 . Here is my preset: flags=+loop+mv4 cmp=256 partitions=+parti4x4+parti8x8+partp4x4+partp8x8+partb8x8 me_method=hex subq=7 trellis=1 refs=5 bf=3 flags2=+bpyramid+wpred+mixed_refs+dct8x8 coder=1 me_range=16 g=250 keyint_min=25 sc_threshold=40 i_qfactor=0.71 qmin=10 qmax=51 qdiff=4 Is there any reason why the 1st pass is not utilizing my CPUs ? Thank you in advance! This community has always been very kind to me.

  Read the article

• Configure IIS 6 to deny access to specific file based upon IP address

  - by victorferreira

  Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

  Read the article

• Video on demand streaming solution

  - by Rafal Saltarski

  we are looking into building a commercial vod service and I'm doing research on the subject. We need the video to be protected with DRM so users cant rip/copy (i realise its mostly useless but the lawyers demand it from us) and the server solution to be scalable and able to distrubute content in hd to a high number of clients. Besides, we would need to be able to develop a player integrated with the payment system, so users that havent bought access would for example only see the first 30 seconds of video and then have the playback interrupted, or only be able to watch video for 72h after payment. Also it would be nice if we could distribute video to mobile platforms like android/wp8/ios but thats not a priority at the moment. I have zero experience on that topic so I would greatly appreciate any feedback or giving me stuff to read about like protocols or key phrases i should know. Thanks

  Read the article

• Can i setup my second ip adress as secondary nameserver.

  - by Saif Bechan

  I have a server with 2 ip adresses. If i type the first one into my browser i end up with my website. 62.212.66.33 If i type my second ip adress in the bar i end up somewhere else. 62.212.66.56 Can i set this second ip to act as secondary nameserver. I made NS and a records for the domains. Waited 72 hours. But it returns no records. for dns check. Is this type of setup possible?

  Read the article

• Apache connection intermittantly times out on LAN

  - by jonescb

  I'm using Fedora 12 with Apache 2.2.14, and I was having this error on 2.2.13 as well. Even when I connect to my server over LAN, Firefox will occasionally time out while connecting. I can't figure out what is causing this. The error log isn't showing anything. I even cleaned the error log file, so that if something happened, it'd be a little easier to spot. But I'm still getting time outs, and nothing in the error log. Can anybody help me find what the problem is? Here is my httpd.conf Pastebin It's the default Fedora configuration; I've only changed the ServerName if I remember correctly. I'm pretty sure it's not the Timeout setting, because on LAN it should never time out. I don't believe it's a load issue either, I'm the only one connecting to it. I'm not an Apache expert, so if more information is needed I'll need some instructions on how to get that data.

  Read the article

• How do you create a virtual directory in Mac Snow Leopard?

  - by johnny

  I am using the server admin tool for the web and see where I can create sites with the +. I thought that was creating virtual directory but it doesn't seem to be. I need a site that uses port 80 but is like http://myserver/myvirtual instead of http://myserver which is what this one with the + does. how do I make a virtual directory with the tool like in IIS? Thank you. edit: how can I put a bounty on this?

  Read the article

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• Does SMTP greylisting a) stop much spam and b) stop much legitimate mail?

  - by Whisk

  I've just set up an SMTP server on a relatively little used domain using Postfix and enabled greylisting with SQLGrey. So far it seems to be working OK, and while there's the slight irritation of delays to emails from new senders, I can see from the logs that it's deterring a number of spam messages. In your experience does greylisting effectively stop much spam? Is it a useful addition to e.g. SpamAssassin or is adding it on top overkill/unnecessary? If I were to roll this out to heavier use domains (perhaps with more demanding users) would you anticipate a significant portion of poorly configured mail servers that would end up bouncing or losing messages?

  Read the article

• Have apache choose a php version based on the extension in the url, but with a single file on the filesystem

  - by Somejan

  I want to configure a local apache server to serve php files with different php versions. In my document root I have phpinfo.php, now if I go to http://localhost/phpinfo.php4, I want to see the phpinfo.php file processed with php4, if I go to http://localhost/phpinfo.php5 I want to see the same file processed with php5. Note: both php 4 and 5 are already installed side by side, I have no problem configuring apache to treat files that have a .php4 or .php5 extension on the filesystem with the correct php version. What I want is for apache to do the following: If the url-path ends in .php5, serve the file which has a .php extension on the filesystem using the application/x-httpd-php5 handler. If the url-path ends in .php4, serve the same file with the .php extension on the filesystem using the application/x-httpd-php4 handler.

  Read the article

• Recommendation for a non-standard SSL port

  - by onurs

  Hey guys, On our server I have a single IP, and need to host 2 different SSL sites. Sites have different owners so have different SSL certificates, and can't share the same certificate with SAN. So as a last resort I have modified the web application to give the ability to use a specified port for secure pages. For its simple look I used port 200. However I'm worried about some visitors may be unable to see the site because of their firewalls / proxies blocking the port for ssl connections. I heard some people were unable to see the website, a home user and someone from an enterprise company, don't know if this was the reason. So, any recommendations for a non-standard SSL port number (443 is used by the other site) which may work for visitors better than port 200 ? Like 8080 or 8443 perhaps? Thanks!

  Read the article

• .htaccess does not ask the password

  - by Sarp Kaya

  I am using Ubuntu 12.04 and trying to use .htaccess on a page with apache2 server on it. My .htaccess file looks like this: AuthType Basic AuthName "Password Required" AuthBasicProvider file AuthUserFile /home/janeb/.htpasswd require valid-user /home/janeb/.htpasswd file is: inb351:$apr1$Ya4tzYvr$KCs3eyK1O2/c7Q9zRcwn.. and /etc/apache2/sites-available/default file is : UserDir public_html <Directory ~ "public_html/.*"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> I restarted apache. I have tried to change require valid-user to require user inb351. Still no luck. I also tried AllowOverride with AuthConfig and AuthConfig Indexes. So I don't know what else to do, and yes every step that I have tried I restarted apache.

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• How do you configure ISC Bind to support GSS-TSIG Updates?

  - by netlinxman

  First, has anyone EVER configured ISC bind 9.5.0 OR greater with support for GSS-TSIG Dynamic DNS Updates AND gotten it to work? If so, what is the configuration that was used to make that happen? I feel close to having this working. I see that GSS cred passes w/o apparent error during the TKEY negotiation with an Active Directory DC and the BIND DNS server: client 192.168.0.30#52314: query gss cred: "DNS/[email protected]", GSS_C_ACCEPT, 4294967256 gss-api source name (accept) is [email protected] process_gsstkey(): dns_tsigerror_noerror client 192.168.0.30#52314: send But, when the Update is sent, it is refused: client 192.168.0.30#58330: update client 192.168.0.30#58330: updating zone 'example.com/IN': update failed: rejected by secure update (REFUSED) client 192.168.0.30#58330: send Does anyone have this working in the real world?

  Read the article

• Session Variables lost between pages reloads

  - by Android Addict

  I was forced to move to IIS 7 when the server running our IIS 6 died. Nothing in the web app has changed, but it's obvious the environment has dramatically. The app fails between pages because the session variables are lost during redirect. I am not an expert on app pools but my impression from reading several posts is that the app pool is being recycled immediately. While they give a reason, they offer no help in how to resolve this. Can someone explain to a newb how to properly configure the DefaultAppPool?

  Read the article

• TCP/IP performance tuning under KVM/Qemu

  - by vpetersson

  With more and more companies switching to public cloud services, I'm curious what you guys' thoughts are on TCP/IP tuning in the cloud. Is it worth bothering with? Given that you don't have access to the host-server, you're somewhat limited I presume Let's say for the sake of the argument that you're running three MongoDB-servers in a replica-set on FreeBSD or Linux that all sync over an internal network. I'd also be curious if anyone made any actual performance benchmarks to back up their arguments. I benchmarked the various network drivers available for KVM/Qemu here, but I'm curious what the gurus here suggest to tune further. I started playing around a bit with the tuning-recommendations as suggested over here, but interestingly enough I saw a decrease in performance, rather than an increase, but perhaps I didn't fully understand the tweaks. Update: I did a few more benchmarks and posted the result here. Unfortunately the result wasn't really what I expected.

  Read the article

• listing of VM's created before libvirt installation or started by any other VM management tool

  - by Dr. Death

  if my VM's are not created using virt-manager or are created using any other tool, then virsh system list command does not give them in the list of running VM's however they are running perfectly on my KVM server. Is there a way to list these VM's in my system list anyhow? I have VM's managed by GKVM, AQEMU, libvirt etc. also some of the user start their VM's using the qemu command as follows: kvm "image name" -m "memory". this starts the VM and allow them to work perfectly. but I am not able to list all these VM's using the virsh system list command.

  Read the article

• linux kernel option to set sata disk to udma/133 1.5gbps

  - by John Doe

  hi, i try to speed up boot time of my linux server box which uses removable HDD rack's the current boot time is around 2 min's but if i connect the hdd's directly to the mainboard its about 2 sec's the problem is that ahci's kernel implementation causes a timeout of around 30 seconds for each disk during boot which originates from the hdd-rack after the timeout the kernel prints that the disk is limited with speed to 1.5gbps and udma/133 is used so the question i have is: how can i set this in grub as a boot option so the kernel doesnt have to wait for a timeout and just hardcoded limits the speed of the disks? i read about a few options like pci=nomsi or such, which dont work thats why im asking for limiting precisely the disks during boot thx

  Read the article

• What is a preferred method for automatically configuring and setting up an Ubuntu instance?

  - by sutch

  I am tired of manually configuring instances of Ubuntu for testing web applications and for setting up workstations. I'm even more frustrated by the issues caused by inconsistent configurations. Is there a method (hopefully not too time consuming to learn and setup) that allows for automation of the setup and configuration of an Ubuntu server or workstation from an ISO. This is primarily for virtual machine instances, but it would be helpful to also create instances on hardware. I am specifically looking for a method to automate the installation of libraries (apt-get), configure services (such as Apache and MySQL), add 3rd party software (download, extract and build), and add libraries to scripting languages (for example, Ruby Gems or CPAN packages for Perl).

  Read the article

< Previous Page | 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714  | Next Page >