Search Results

Search found 5021 results on 201 pages for 'limit'.

Page 171/201 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • Entity Framework + MySQL - Why is the performance so terrible?

    - by Cyril Gupta
    When I decided to use an OR/M (Entity Framework for MySQL this time) for my new project I was hoping it would save me time, but I seem to have failed it (for the second time now). Take this simple SQL Query SELECT * FROM POST ORDER BY addedOn DESC LIMIT 0, 50 It executes and gives me results in less than a second as it should (the table has about 60,000 rows). Here's the equivalent LINQ To Entities query that I wrote for this var q = (from p in db.post orderby p.addedOn descending select p).Take(50); var q1 = q.ToList(); //This is where the query is fetched and timed out But this query never even executes it times out ALWAYS (without orderby it takes 5 seconds to run)! My timeout is set to 12 seconds so you can imagine it is taking much more than that. Why is this happening? Is there a way I can see what is the actual SQL Query that Entity Framework is sending to the db? Should I give up on EF+MySQL and move to standard SQL before I lose all eternity trying to make it work? I've recalibrated my indexes, tried eager loading (which actually makes it fail even without the orderby clause) Please help, I am about to give up OR/M for MySQL as a lost cause.

    Read the article

  • Memcache error: Failed reading line from stream (0) Array

    - by daviddripps
    I get some variation of the following error when our server gets put under any significant load. I've Googled for hours about it and tried everything (including upgrading to the latest versions and clean installs). I've read all the posts about it here on SA, but can't figure it out. A lot of people are having the same problem, but no one seems to have a definitive answer. Any help would be greatly appreciated. Thanks in advance. Fatal error: Uncaught exception 'Zend_Session_Exception' with message 'Zend_Session::start() - /var/www/trunk/library/Zend/Cache/Backend/Memcached.php(Line:180): Error #8 Memcache::get() [memcache.get]: Server localhost (tcp 11211) failed with: Failed reading line from stream (0) Array We have a copy of our production environment for testing and everything works great until we start load-testing. I think the biggest object stored is about 170KB, but it will probably be about 500KB when all is said and done (well below the 1MB limit). Just FYI: Memcache gets hit about 10-20 times per page load. Here's the memcached settings: PORT="11211" USER="memcached" MAXCONN="1024" CACHESIZE="64" OPTIONS="" I'm running Memcache 1.4.5 with version 2.2.6 of the PHP-memcache module. PHP is version 5.2.6. memcache details from php -i: memcache memcache support = enabled Active persistent connections = 0 Version = 2.2.6 Revision = $Revision: 303962 $ Directive = Local Value = Master Value memcache.allow_failover = 1 = 1 memcache.chunk_size = 8192 = 8192 memcache.default_port = 11211 = 11211 memcache.default_timeout_ms = 1000 = 1000 memcache.hash_function = crc32 = crc32 memcache.hash_strategy = standard = standard memcache.max_failover_attempts = 20 = 20 Thanks everyone

    Read the article

  • strange Django problem

    - by Pounds
    Sorrt to bother you everyone, but I really suffer a strange problem. I am working on a Django project for a company. This project worked very well before today. Today I found a page can not show images (and their corrsponding links). I checked source code of THAT PAGE, I found there are images and links, I just can not find them on the page. I checked the auth of the server and I am sure I can write things to the database. In fact, I think it is not database mistake because I can find what I want in the page source code, I just can not find them on the page. Oh my Gosh, I am going to be crazy... Has anyone suffered similar problem? What kind of problem could it be? Please help me! Thank you very much! PS: I can not provide any source code of the project because some business limit...I am really sorry...

    Read the article

  • Replace string with incremented value

    - by Andrei
    Hello, I'm trying to write a CSS parser to automatically dispatch URLs in background images to different subdomains in order to parallelize downloads. Basically, I want to replace things like url(/assets/some-background-image.png) with url(http://assets[increment].domain.com/assets/some-background-image.png) I'm using this inside a class that I eventually want to evolve into doing various CSS parsing tasks. Here are the relevant parts of the class : private function parallelizeDownloads(){ static $counter = 1; $newURL = "url(http://assets".$counter.".domain.com"; The counter needs to be reset when it reaches 4 in order to limit to 4 subdomains. if ($counter == 4) { $counter = 1; } $counter ++; return $newURL; } public function replaceURLs() { This is mostly nonsense, but I know the code I'm looking for looks somewhat like this. Note : $this-css contains the CSS string. preg_match("/url/i",$this->css,$match); foreach($match as $URL) { $newURL = self::parallelizeDownloads(); $this->css = str_replace($match, $newURL,$this->css); } }

    Read the article

  • What's the best way to store Logon User information for Web Application?

    - by Morgan Cheng
    I was once in a project of web application developed on ASP.NET. For each logon user, there is an object (let's call it UserSessionObject here) created and stored in RAM. For each HTTP request of given user, matching UserSessoinObject instance is used to visit user state information and connection to database. So, this UserSessionObject is pretty important. This design brings several problems found later: 1) Since this UserSessionObject is cached in ASP.NET memory space, we have to config load balancer to be sticky connection. That is, HTTP request in single session would always be sent to one web server behind. This limit scalability and maintainability. 2) This UserSessionObject is accessed in every HTTP request. To keep the consistency, there is a exclusive lock for the UserSessionObject. Only one HTTP request can be processed at any given time because it must to obtain the lock first. The performance and response time is affected. Now, I'm wondering whether there is better design to handle such logon user case. It seems Sharing-Nothing-Architecture helps. That means long user info is retrieved from database each time. I'm afraid that would hurt performance. Is there any design pattern for long user web app? Thanks.

    Read the article

  • Save Xml in an Excel cell value causes ComException

    - by mas_oz2k1
    I am trying to save an object (Class1) as string in a cell value. My issue is that from time to time I have a ComException: HRESULT: 0x8007000E (E_OUTOFMEMORY) (It is kind of random but I have not identified any particular pattern yet) when I write the value into a cell. Any ideas will be welcome For illustration purposes: Let Class1 be the class to be converted to an Xml string. (Notice that I removed the xml declaration at the start of the string to avoid having the preamble present- non printable character) <Class1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" <ElementID HL690375</ElementID </Class1" Class1 myClass = new Class1(); this class is converted to a string s. s= ConvertObjectToXmlString(myClass); then s is assigned to a cell Range r = Application.ActiveCell; r.Value2 = s; Note: (1) If the string is too big, I limit it to 32000 chars and split the string in chunks of 32000 chars and save the chunks in multiple cells. (2) I do not to quote the string before adding to a cell. Do I need to? If so how it can be done? (3) All object contents are English. (4) C# code sample will be great but VB.net code is OK.

    Read the article

  • Mysql for update

    - by shantanuo
    MySQL supports "for update" keyword. Here is how I tested that it is working as expected. I opened 2 browser tabs and executed the following commands in one window. mysql> start transaction; Query OK, 0 rows affected (0.00 sec) mysql> select * from myxml where id = 2 for update; .... mysql> update myxml set id = 3 where id = 2 limit 1; Query OK, 1 row affected, 1 warning (0.00 sec) Rows matched: 1 Changed: 1 Warnings: 0 mysql> commit; Query OK, 0 rows affected (0.08 sec) In another window, I started the transaction and tried to take an update lock on the same record. mysql> start transaction; Query OK, 0 rows affected (0.00 sec) mysql> select * from myxml where id = 2 for update; Empty set (43.81 sec) As you can see from the above example, I could not select the record for 43 seconds as the transaction was being processed by another application in the Window No 1. Once the transaction was over, I got to select the record, but since the id 2 was changed to id 3 by the transaction that was executed first, no record was returned. My question is what are the disadvantages of using "for update" syntax? If I do not commit the transaction that is running in window 1 will the record be locked for-ever?

    Read the article

  • What characters are NOT escaped with a mysqli prepared statement?

    - by barfoon
    Hey everyone, I'm trying to harden some of my PHP code and use mysqli prepared statements to better validate user input and prevent injection attacks. I switched away from mysqli_real_escape_string as it does not escape % and _. However, when I create my query as a mysqli prepared statement, the same flaw is still present. The query pulls a users salt value based on their username. I'd do something similar for passwords and other lookups. Code: $db = new sitedatalayer(); if ($stmt = $db->_conn->prepare("SELECT `salt` FROM admins WHERE `username` LIKE ? LIMIT 1")) { $stmt->bind_param('s', $username); $stmt->execute(); $stmt->bind_result($salt); while ($stmt->fetch()) { printf("%s\n", $salt); } $stmt->close(); } else return false; Am I composing the statement correctly? If I am what other characters need to be examined? What other flaws are there? What is best practice for doing these types of selects? Thanks,

    Read the article

  • Elo rating system: start value

    - by Marco W.
    I've implemented an Elo rating system in a game. There is no limit for the number players. Players can join the game constantly so the number of players probably rises gradually. How the Elo values are exactly calculated isn't important because of this fact: If team A beats team B then A's Elo win equals B's Elo loss. Hence I've got a problem concerning the starting values for my rating system: Should I use the starting value "0" for every player? The sum of all Elo values would be constant. But since the number of players is increasing there would be some kind of Elo deflation, wouldn't it? Should I use any starting value greater than 0? In this case, the sum of all Elo values would constantly increase. So there could be an Elo inflation. The problem: Elo points lose value but the starting value keeps always the same. What should I do? Can you help me? Thanks in advance!

    Read the article

  • Need to find number of new unique ID numbers in a MySQL table

    - by Nicholas
    I have an iPhone app out there that "calls home" to my server every time a user uses it. On my server, I create a row in a MySQL table each time with the unique ID (similar to a serial number) aka UDID for the device, IP address, and other data. Table ClientLog columns: Time, UDID, etc, etc. What I'd like to know is the number of new devices (new unique UDIDs) on a given date. I.e. how many UDIDs were added to the table on a given date that don't appear before that date? Put plainly, this is the number of new users I gained that day. This is close, I think, but I'm not 100% there and not sure it's what I want... SELECT distinct UDID FROM ClientLog a WHERE NOT EXISTS ( SELECT * FROM ClientLog b WHERE a.UDID = b.UDID AND b.Time <= '2010-04-05 00:00:00' ) I think the number of rows returned is the new unique users after the given date, but I'm not sure. And I want to add to the statement to limit it to a date range (specify an upper bound as well).

    Read the article

  • Help with MySQL query... Need help ordering a group of rows

    - by user156814
    I can tell it best by explaining the query I have, and what I need. I need to be able to get a group of items from the database, grouped by category, manufacturer, and year made. The groupings need to be sorted based on total amount of items within the group. This part is done with the query below. Secondly, I need to be able to show an image of the most expensive item out of the group, which is why I use MAX(items.current_price). I thought MAX() gets the ENTIRE row corresponding to the largest column value. I was wrong, as MAX only gets the numeric value of the largest price. So the query doesnt work well for that. SELECT items.id, items.year, items.manufacturer, COUNT(items.id) AS total, MAX(items.current_price) AS price, items.gallery_url, FROM ebay AS items WHERE items.primary_category_id = 213 AND items.year <> '' AND items.manufacturer <> '' AND items.bad_item <> 1 GROUP BY items.primary_category_id, items.manufacturer, items.year ORDER BY total DESC, price ASC LIMIT 10 if that doesnt explain it well, the results should be something like this id 10548 year 1989 manufacturer bowman total 451 price 8500.00 (The price of the most expensive item in the table/ not the price of item 10548) gallery_url http://ebay.xxxxx (The image of item 10548) A little help please. Thanks

    Read the article

  • Using a join with three tables when a field might be null

    - by John
    Hello, The code below works great. It combines data from two MySQL tables. I would like to modify it by pulling in some data from a third MySQL table called "comment." In the HTML table below, "title" is a field in the MySQL table "submission." Every "title" has a corresponding "submissionid" field. The field "submissionid" is also found in the "comment" MySQL table. In the HTML table below, I would like "countComments" to equal the number of times a field called "commentid" appears in the MySQL table "comment" for any given "submissionid," where the "submissionid" is the same in both the "submission" and "comment" tables, and where the "submissionid" corresponds to the "title" being used. Here's the catch: if there is no row in the MySQL table "comment" that corresponds with the "submissionid" being used for "table", I would like "countComments" to equal to zero. How can I do this? Thanks in advance, John $sqlStr = "SELECT s.loginid, s.title, s.url, s.displayurl, l.username FROM submission AS s, login AS l WHERE s.loginid = l.loginid ORDER BY s.datesubmitted DESC LIMIT 10"; $result = mysql_query($sqlStr); $arr = array(); echo "<table class=\"samplesrec\">"; while ($row = mysql_fetch_array($result)) { echo '<tr>'; echo '<td class="sitename1"><a href="http://www.'.$row["url"].'">'.$row["title"].'</a></td>'; echo '</tr>'; echo '<tr>'; echo '<td class="sitename2"><a href="http://www...com/sandbox/members/index.php?profile='.$row["username"].'">'.$row["username"].'</a><a href="http://www...com/sandbox/comments/index.php?submission='.$row["title"].'">'.$row["countComments"].'</a></td>'; echo '</tr>'; } echo "</table>";

    Read the article

  • Get 1 array from 2 arrays (using RestKit 0.20)

    - by Reez
    I'm using RestKit and was wondering how to combine two array's into one array. I already have the data being pulled in separately from API1 and API2, but I don't know how to combine them into 1 tableView. Each API is pulling in media, and I want the combined tableView to show the most recent media (like any standard timeline does these days). I will post any extra code or help as necessary, thanks so much! Below shows API1 + API2 being pulled in correctly, but not combined into the tableView. Only data from API1 shows in the tableView. ViewController.m @interface StackOverflowViewController () @property (strong, nonatomic) NSArray *hArray; @property (strong, nonatomic) NSArray *springs; @property (strong, nonatomic) RKObjectManager *eObjectManager; @property (strong, nonatomic) NSArray *iArray; @property (strong, nonatomic) NSArray *imagesArray; @property (strong, nonatomic) RKObjectManager *iObjectManager; // Wain @property (strong, nonatomic) NSMutableArray *tableDataList; // Laarme @property (nonatomic, strong) NSMutableArray *contentArray; @property (nonatomic, strong) NSDateFormatter *dateFormatter1; // Dan @property (nonatomic, strong) NSMutableArray *combinedModel; @end @implementation StackOverflowViewController @synthesize tableView = _tableView; @synthesize spring; @synthesize leaf; @synthesize theme; @synthesize hArray; @synthesize springs; @synthesize eObjectManager; @synthesize iArray; @synthesize imagesArray; @synthesize iObjectManager; // Wain @synthesize tableDataList; // Laarme @synthesize contentArray; @synthesize dateFormatter1; // Dan @synthesize combinedModel; - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view. [self configureRestKit]; [self loadMediaDan]; [self sortCombinedModel]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; // Dispose of any resources that can be recreated. } - (void)configureRestKit { // API1 // initialize AFNetworking HTTPClient NSURL *baseURLE = [NSURL URLWithString:@"https://api.e.com"]; AFHTTPClient *clientE = [[AFHTTPClient alloc] initWithBaseURL:baseURLE]; // initialize RestKit RKObjectManager *eManager = [[RKObjectManager alloc] initWithHTTPClient:clientE]; self.eObjectManager = eManager; // setup object mappings RKObjectMapping *feedMapping = [RKObjectMapping mappingForClass:[Feed class]]; [feedMapping addAttributeMappingsFromArray:@[@"headline", @"premium", @"published", @"description"]]; RKObjectMapping *linksMapping = [RKObjectMapping mappingForClass:[Links class]]; RKObjectMapping *webMapping = [RKObjectMapping mappingForClass:[Web class]]; [webMapping addAttributeMappingsFromArray:@[@"href"]]; RKObjectMapping *mobileMapping = [RKObjectMapping mappingForClass:[Mobile class]]; [mobileMapping addAttributeMappingsFromArray:@[@"href"]]; RKObjectMapping *imagesMapping = [RKObjectMapping mappingForClass:[Images class]]; [imagesMapping addAttributeMappingsFromArray:@[@"height", @"width", @"url"]]; [feedMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"links" toKeyPath:@"links" withMapping:linksMapping]]; [feedMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"images" toKeyPath:@"images" withMapping:imagesMapping]]; [linksMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"web" toKeyPath:@"web" withMapping:webMapping]]; [linksMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"mobile" toKeyPath:@"mobile" withMapping:mobileMapping]]; // register mappings with the provider using a response descriptor RKResponseDescriptor *responseDescriptor = [RKResponseDescriptor responseDescriptorWithMapping:feedMapping method:RKRequestMethodGET pathPattern:nil keyPath:@"feed" statusCodes:[NSIndexSet indexSetWithIndex:200]]; [self.eObjectManager addResponseDescriptor:responseDescriptor]; // API2 // initialize AFNetworking HTTPClient NSURL *baseURLI = [NSURL URLWithString:@"https://api.i.com"]; AFHTTPClient *clientI = [[AFHTTPClient alloc] initWithBaseURL:baseURLI]; // initialize RestKit RKObjectManager *iManager = [[RKObjectManager alloc] initWithHTTPClient:clientI]; self.iObjectManager = iManager; // setup object mappings RKObjectMapping *dataMapping = [RKObjectMapping mappingForClass:[Data class]]; [dataMapping addAttributeMappingsFromArray:@[@"link", @"created_time"]]; RKObjectMapping *imagesMapping = [RKObjectMapping mappingForClass:[ImagesI class]]; [IMapping addAttributeMappingsFromArray:@[@""]]; RKObjectMapping *standardResolutionMapping = [RKObjectMapping mappingForClass:[StandardResolution class]]; [standardResolutionMapping addAttributeMappingsFromArray:@[@"url", @"width", @"height"]]; RKObjectMapping *captionMapping = [RKObjectMapping mappingForClass:[Caption class]]; [captionMapping addAttributeMappingsFromArray:@[@"text", @"created_time"]]; RKObjectMapping *userMapping = [RKObjectMapping mappingForClass:[User class]]; [userMapping addAttributeMappingsFromArray:@[@"username"]]; [dataMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"images" toKeyPath:@"images" withMapping:imagesMapping]]; [imagesMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"standard_resolution" toKeyPath:@"standard_resolution" withMapping:standardResolutionMapping]]; [dataMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"caption" toKeyPath:@"caption" withMapping:captionMapping]]; [dataMapping addPropertyMapping:[RKRelationshipMapping relationshipMappingFromKeyPath:@"user" toKeyPath:@"user" withMapping:userMapping]]; // register mappings with the provider using a response descriptor RKResponseDescriptor *responseDescriptor2 = [RKResponseDescriptor responseDescriptorWithMapping:dataMapping method:RKRequestMethodGET pathPattern:nil keyPath:@"data" statusCodes:[NSIndexSet indexSetWithIndex:200]]; [self.iObjectManager addResponseDescriptor:responseDescriptor2]; } - (void)loadMedia { // Laarme contentArray = [[NSMutableArray alloc] init]; [self sortByDates]; // API1 NSString *apikey = @kCLIENTKEY; NSDictionary *queryParams = @{@"apikey" : apikey,}; [self.eObjectManager getObjectsAtPath:[NSString stringWithFormat:@"v1/n/?limit=4&leafs=%@&themes=%@", leafAbbreviation, themeID] // Changed limit to 4 for the time being parameters:queryParams success:^(RKObjectRequestOperation *operation, RKMappingResult *mappingResult) { hArray = mappingResult.array; [self.tableView reloadData]; } failure:^(RKObjectRequestOperation *operation, NSError *error) { NSLog(@"No?: %@", error); }]; // API2 [self.iObjectManager getObjectsAtPath:[NSString stringWithFormat:@"v1/u/2/m/recent/?client_id=e999"] parameters:nil success:^(RKObjectRequestOperation *operation, RKMappingResult *mappingResult) { iArray = mappingResult.array; [self.tableView reloadData]; } failure:^(RKObjectRequestOperation *operation, NSError *error) { NSLog(@"No: %@", error); }]; } // Laarme - (void)sortByDates { NSDateFormatter *dateFormatter2 = [[NSDateFormatter alloc] init]; //Do the dateFormatter settings, you may have to use 2 NSDateFormatters if the format is different for Data & Feed //The initialization of the dateFormatter is done before the block, because its alloc/init take some time, and you may have to declare it with "__block" //Since in your edit you do that and it seems it's the same format, just do @property (nonatomic, strong) NSDateFormatter dateFormatter; NSArray *sortedArray = [contentArray sortedArrayUsingComparator:^NSComparisonResult(id a, id b) { // Added Curly Braces around if else statements and used feedObject NSDate *aDate, *bDate; Feed *feedObject = (Feed *)a; Data *dataObject = (Data *)b; if ([a isKindOfClass:[Feed class]]) { //Feed *feedObject = (Feed *)a; aDate = [dateFormatter1 dateFromString:feedObject.published];} else { //if ([a isKindOfClass:[Data class]]) aDate = [dateFormatter2 dateFromString:dataObject.created_time];} if ([b isKindOfClass:[Feed class]]) { bDate = [dateFormatter1 dateFromString:feedObject.published];} else {//if ([b isKindOfClass:[Data class]]) bDate = [dateFormatter2 dateFromString:dataObject.created_time];} return [aDate compare:bDate]; }]; } #pragma mark - Table View - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { // API1 //return hArray.count; // API2 //return iArray.count; // API1 + API2 return hArray.count + iArray.count; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { UITableViewCell *cell; if(indexPath.row < hArray.count) { // Date Change NSDateFormatter *df = [[NSDateFormatter alloc] init]; [df setDateFormat:@"MMMM d, yyyy h:mma"]; // API 1 TableViewCell *api1Cell = [tableView dequeueReusableCellWithIdentifier:@"YourAPI1Cell"]; // Do everything you need to do with the api1Cell // Use the index in 'indexPath.row' to get the object from you array // API1 Feed *feedLocal = [hArray objectAtIndex:indexPath.row]; // API1 NSString *dateString = [self timeSincePublished:feedLocal.published]; NSString *headlineText = [NSString stringWithFormat:@"%@", feedLocal.headline]; NSString *descriptionText = [NSString stringWithFormat:@"%@", feedLocal.description]; NSString *premiumText = [NSString stringWithFormat:@"%@", feedLocal.premium]; api1Cell.labelHeadline.text = [NSString stringWithFormat:@"%@", headlineText]; api1Cell.labelPublished.text = dateString; api1Cell.labelDescription.text = descriptionText; // SDWebImage API1 if ([feedLocal.images count] == 0) { // Not sure anything needed here } else { Images *imageLocal = [feedLocal.images objectAtIndex:0]; NSString *imageURL = [NSString stringWithFormat:@"%@", imageLocal.url]; NSString *imageWith = [NSString stringWithFormat:@"%@", imageLocal.width]; NSString *imageHeight = [NSString stringWithFormat:@"%@", imageLocal.height]; __weak UITableViewCell *wcell = cell; [cell.imageView setImageWithURL:[NSURL URLWithString:imageURL] placeholderImage:[UIImage imageNamed:@"X"] completed:^(UIImage *image, NSError *error, SDImageCacheType cacheType) { // Something }]; } cell = api1Cell; } else { // Date Change NSDateFormatter *df = [[NSDateFormatter alloc] init]; [df setDateFormat:@"MMMM d, yyyy h:mma"]; // API 2 MRWebListTableViewCellTwo *api2Cell = [tableView dequeueReusableCellWithIdentifier:@"YourAPI2Cell"]; // Do everything you need to do with the api2Cell // Remember to use 'indexPath.row - hArray.count' as the index for getting an object for your second array // API 2 Data *dataLocal = [iArray objectAtIndex:indexPath.row - hArray.count]; // API 2 NSString *dateStringI = [self timeSincePublished:dataLocal.created_time]; NSString *captionTextI = [NSString stringWithFormat:@"%@", dataLocal.caption.text]; NSString *usernameI = [NSString stringWithFormat:@"%@", dataLocal.user.username]; api2Cell.labelHeadline.text = usernameI; api2Cell.labelDescription.text = captionTextI; api2Cell.labelPublished.text = dateStringI; // SDWebImage API 2 if ([dataLocal.images count] == 0) { NSLog(@"Images Count: %lu", (unsigned long)dataLocal.images.count); // Not sure anything needed here } else { ImagesI *imageLocalI = [dataLocal.images objectAtIndex:0]; StandardResolutionI *standardResolutionLocal = [imageLocalI.standard_resolution objectAtIndex:0]; NSString *imageURLI = [NSString stringWithFormat:@"%@", standardResolutionLocal.url]; NSString *imageWithI = [NSString stringWithFormat:@"%@", standardResolutionLocal.width]; NSString *imageHeightI = [NSString stringWithFormat:@"%@", standardResolutionLocal.height]; // 11.2 __weak UITableViewCell *wcell = cell; [cell.imageView setImageWithURL:[NSURL URLWithString:imageURLI] placeholderImage:[UIImage imageNamed:@"X"] completed:^(UIImage *image, NSError *error, SDImageCacheType cacheType) { // Something }]; } cell = api2Cell; } return cell; } Feed.h @property (nonatomic, strong) Links *links; @property (nonatomic, strong) NSString *headline; @property (nonatomic, strong) NSString *source; @property (nonatomic, strong) NSDate *published; @property (nonatomic, strong) NSString *description; @property (nonatomic, strong) NSString *premium; @property (nonatomic, strong) NSArray *images; Data.h @property (nonatomic, strong) NSString *link; @property (nonatomic, strong) NSDate *created_time; @property (nonatomic, strong) UserI *user; @property (nonatomic, strong) NSArray *images; @property (nonatomic, strong) CaptionI *caption;

    Read the article

  • Ajax Request not working. onSuccess and onFailure not triggering

    - by Kye
    Hi all, trying to make a page which will recursively call a function until a limit has been reached and then to stop. It uses an ajax query to call an external script (which just echo's "done" for now) howver with neither onSuccess or onFailure triggering i'm finding it hard to find the problem. Here is the javascript for it. In the header for the webpage there is a script to an ajax.js document which contains the request data. I know the ajax.js works as I've used it on another website var Rooms = "1"; var Items = "0"; var ccode = "9999/1"; var x = 0; function echo(string,start){ var ajaxDisplay = document.getElementById('ajaxDiv'); if(start) {ajaxDisplay.innerHTML = string;} else {ajaxDisplay.innerHTML = ajaxDisplay.innerHTML + string;} } function locations() { echo("Uploading location "+x+" of " + Rooms,true); Ajax.Request("Perform/location.php", { method:'get', parameters: {ccode: ccode, x: x}, onSuccess: function(reply) {alert("worked"); if(x<Rooms) { x++; locations(); } else { x=0; echo("Done",true); } }, onFailure: function() {alert("not worked"); echo("not done"); } }); alert("boo"); } Any help or advice will be most appreciated.

    Read the article

  • merge my code with Ajax code>>> problem

    - by sandy
    I want to help me In the following link i found nice code in Ajax http://www.w3schools.com/php/php_ajax_livesearch.asp I want to link my code with the code you see in the link above and replace dropdown list How can I do it for I could not where is it change in code even my code work as Ajax ?? I wish .... I wish .... I wish any somebody can help me <?php include ("connect.php"); print_r($_POST['sector_list']); $member_id = intval($_POST['sector_list']); if($member_id == 0) { // Default choice was selected } else { $res = mysql_query("SELECT * FROM members WHERE MemberID = $member_id LIMIT 1"); if(mysql_num_rows($res) == 0) { // Not a valid member } else { // The member is in the database } } ?> <form method="POST" action=<?php echo $_SERVER["PHP_SELF"]; ?> > <input type="hidden" name="sector" value="sector_list"> <select name="sector_list[]" class="inputstandard" multiple="multiple"> <option size ="40" value="default">send to </option> <?php $result = mysql_query('SELECT * from members') or die(mysql_error()); while ($row = mysql_fetch_assoc($result)) { echo '<option value="' . $row['MemberName'] . '">' . $row['MemberName']. '</option>'; } ?> <input type ="submit" name ="go" value = "go" > </select> </form>

    Read the article

  • Calling a jQuery method at declaration time, and then onEvent

    - by cesarsalazar
    I've been writing JS (mainly jQuery) for quite a few months now, but today I decided to make my first abstraction as a jQuery method. I already have working code but I feel/know that I'm not doing it the right way, so I come here for some enlightenment. Note: Please do not reply that there's already something out there that does the trick as I already know that. My interest in this matter is rather educational. What my code is intended to do (and does): Limit the characters of a textfield and change the color of the counter when the user is approaching the end. And here's what I have: $(function(){ $('#bio textarea').keyup(function(){ $(this).char_length_validation({ maxlength: 500, warning: 50, validationSelector: '#bio .note' }) }) $('#bio textarea').trigger('keyup'); }) jQuery.fn.char_length_validation = function(opts){ chars_left = opts.maxlength - this.val().length; if(chars_left >= 0){ $(opts.validationSelector + ' .value').text(chars_left); if(chars_left < opts.warning){ $(opts.validationSelector).addClass('invalid'); } else{ $(opts.validationSelector).removeClass('invalid'); } } else{ this.value = this.value.substring(0, opts.maxlength); } } In the HTML: <div id="bio"> <textarea>Some text</textarea> <p class="note> <span class="value">XX</span> <span> characters left</span> </p> </div> Particularly I feel really uncomfortable binding the event each on each keyup instead of binding once and calling a method later. Also, (and hence the title) I need to call the method initially (when the page renders) and then every time the user inputs a character. Thanks in advance for your time :)

    Read the article

  • Oracle User definied aggregate function for varray of varchar

    - by baju
    I am trying to write some aggregate function for the varray and I get this error code when I'm trying to use it with data from the DB: ORA-00600 internal error code, arguments: [kodpunp1], [], [], [], [], [], [], [], [], [], [], [] [koxsihread1], [0], [3989], [45778], [], [], [], [], [], [], [], [] Code of the function is really simple(in fact it does nothing ): create or replace TYPE "TEST_VECTOR" as varray(10) of varchar(20) ALTER TYPE "TEST_VECTOR" MODIFY LIMIT 4000 CASCADE create or replace type Test as object( lastVector TEST_VECTOR, STATIC FUNCTION ODCIAggregateInitialize(sctx in out Test) return number, MEMBER FUNCTION ODCIAggregateIterate(self in out Test, value in TEST_VECTOR) return number, MEMBER FUNCTION ODCIAggregateMerge(self IN OUT Test, ctx2 IN Test) return number, MEMBER FUNCTION ODCIAggregateTerminate(self IN Test, returnValue OUT TEST_VECTOR, flags IN number) return number ); create or replace type body Test is STATIC FUNCTION ODCIAggregateInitialize(sctx in out Test) return number is begin sctx := Test(TEST_VECTOR()); return ODCIConst.Success; end; MEMBER FUNCTION ODCIAggregateIterate(self in out Test, value in TEST_VECTOR) return number is begin self.lastVector := value; return ODCIConst.Success; end; MEMBER FUNCTION ODCIAggregateMerge(self IN OUT Test, ctx2 IN Test) return number is begin return ODCIConst.Success; end; MEMBER FUNCTION ODCIAggregateTerminate(self IN Test, returnValue OUT TEST_VECTOR, flags IN number) return number is begin returnValue := self.lastVector; return ODCIConst.Success; end; end; create or replace FUNCTION test_fn (input TEST_VECTOR) RETURN TEST_VECTOR PARALLEL_ENABLE AGGREGATE USING Test; Next I create some test data: create table t1_test_table( t1_id number not null, t1_value TEST_VECTOR not null, Constraint PRIMARY_KEY_1 PRIMARY KEY (t1_id) ) Next step is to put some data to the table insert into t1_test_table (t1_id,t1_value) values (1,TEST_VECTOR('x','y','z')) Now everything is prepared to perform queries: Select test_fn(TEST_VECTOR('y','x')) from dual Query above work well Select test_fn(t1_value) from t1_test_table where t1_id = 1 Version of Oracle DBMS I use: 11.2.0.3.0 Does anyone tried do such a thing? What can be the reason that it does not work? How to solve it? Thanks in advance for help.

    Read the article

  • WCF + Azure = Nightmare!

    - by lsb
    Hi! I've spent the prior week trying to get a secure form of WCF to work on Azure, but all to no avail! My use case is pretty simple. I want to call a WCF endpoint in the cloud and pass messages to be queued for a Worker Role. Beyond that I want to limit access to pre-authrorized users, authenticated via username & password. I've tried to get this working with Transport, TransportWithMessageCredential and Message security but nothing seems to work. Indeed, I've worked through every example and snippet that I could find, most recently the "Service using binary HTTP binding with transport security and message credentials and Silverlight client" example on the http://code.msdn.microsoft.com/wcfazure page. I'm pretty sure that I'm being knocked down by small bugs and beta changes but the end result is that I'm totally stuck. This is a critical path item for me so any suggestions would be greatly appreciated. A complete working example or a walkthrough would be even better!

    Read the article

  • How to protect a form HTML/PHP with JS callback to AS3

    - by Jk_
    Hi guys, I'm developing a Flash website (as3) where I need to be able to upload directly to YouTube by using the DATA API. However in order to do so, I had to use a proper HTML form on top of my flash object. Why? Because of the Browser Based Upload restictions. I first hide the form using JQuery and with a little CSS the form is display just where I want it. Within flash I use ExternalInterface.call() to show/hide the form when I need it! ExternalInterface.call("YTUploader.showIt"); The upload process is working great my only problem is that the form can be displayed easily... You just need a tool like firebug and you can use the form wherever you want on my flash app. So I was wandering which will be the best way to 'protect' this form or the best way to limit its access. Any advices will be appreciated. Thanks for your time. Jk.

    Read the article

  • Heroku: Postgres type operator error after migrating DB from MySQL

    - by sevennineteen
    This is a follow-up to a question I'd asked earlier which phrased this as more of a programming problem than a database problem. http://stackoverflow.com/questions/2935985/postgres-error-with-sinatra-haml-datamapper-on-heroku I believe the problem has been isolated to the storage of the ID column in Heroku's Postgres database after running db:push. In short, my app runs properly on my original MySQL database, but throws Postgres errors on Heroku when executing any query on the ID column, which seems to have been stored in Postgres as TEXT even though it is stored as INT in MySQL. My question is why the ID column is being created as INT in Postgres on the data transfer to Heroku, and whether there's any way for me to prevent this. Here's the output from a heroku console session which demonstrates the issue: Ruby console for myapp.heroku.com >> Post.first.title => "Welcome to First!" >> Post.first.title.class => String >> Post.first.id => 1 >> Post.first.id.class => Fixnum >> Post[1] PostgresError: ERROR: operator does not exist: text = integer LINE 1: ...", "title", "created_at" FROM "posts" WHERE ("id" = 1) ORDER... ^ HINT: No operator matches the given name and argument type(s). You might need to add explicit type casts. Query: SELECT "id", "name", "email", "url", "title", "created_at" FROM "posts" WHERE ("id" = 1) ORDER BY "id" LIMIT 1 Thanks!

    Read the article

  • Common "truisms" needing correction the most

    - by Charles Bretana
    In addition to "I never met a man I didn't like", Will Rogers had another great little ditty I've always remembered. It went: "It's not what you don't know that'll hurt you, it's what you do know that ain't so." We all know or subscribe to many IT "truisms" that mostly have a strong basis in fact, in something in our professional careers, something we learned from others, lessons learned the hard way by ourselves, or by others who came before us. Unfortuntely, as these truisms spread throughout the community, the details—why they came about and the caveats that affect when they apply—tend to not spread along with them. We all have a tendency to look for, and latch on to, small "rules" or principles that we can use to avoid doing a complete exhaustive analysis for every decision. But even though they are correct much of the time, when we sometimes misapply them, we pay a penalty that could be avoided by understooding the details behind them. For example, when user-defined functions were first introduced in SQL Server it became "common knowledge" within a year or so that they had extremely bad performance (because it required a re-compilation for each use) and should be avoided. This "trusim" still increases many database developers' aversion to using UDFs, even though Microsoft's introduction of InLine UDFs, which do not suffer from this issue at all, mitigates this issue substantially. In recent years I have run into numerous DBAs who still believe you should "never" use UDFs, because of this. What other common not-so-"trusims" do you know, which many developers believe, that are not quite as universally true as is commonly understood, and which the developer community would benefit from being better educated about? Please include why it was "true" to start off with, and under what circumstances it's not true. Limit responses to issues that are technical, where the "common" application of a "rule or principle" is in fact correct most of the time, or was correct back when it was first elucidated, but—in the edge cases, or because of not understanding the principle thoroughly, because technology has changed since it first spread, or applying the rule today without understanding the details behind the rule—can easily backfire or cause the opposite of the intended effect.

    Read the article

  • Unable to retrieve search results from server side : Facebook Graph API usig Python

    - by DjangoRocks
    Hi all, I'm doing some simple Python + FB Graph training on my own, and I faced a weird problem: import time import sys import urllib2 import urllib from json import loads base_url = "https://graph.facebook.com/search?q=" post_id = None post_type = None user_id = None message = None created_time = None def doit(hour): page = 1 search_term = "\"Plastic Planet\"" encoded_search_term = urllib.quote(search_term) print encoded_search_term type="&type=post" url = "%s%s%s" % (base_url,encoded_search_term,type) print url while(1): try: response = urllib2.urlopen(url) except urllib2.HTTPError, e: print e finally: pass content = response.read() content = loads(content) print "==================================" for c in content["data"]: print c print "****************************************" try: content["paging"] print "current URL" print url print "next page!------------" url = content["paging"]["next"] print url except: pass finally: pass """ print "new URL is =======================" print url print "==================================" """ print url What I'm trying to do here is to automatically page through the search results, but trying for content["paging"]["next"] But the weird thing is that no data is returned; i received the following: {"data":[]} Even in the very first loop. But when i copied the URL into a browser, a lot of results were returned. I've also tried a version with my access token and th same thing happens. Can anyone enlighten me? +++++++++++++++++++EDITED and SIMPLIFIED++++++++++++++++++ ok thanks to TryPyPy, here's the simplified and edited version of my previous question: Why is that: import urllib2 url = "https://graph.facebook.com/searchq=%22Plastic+Planet%22&type=post&limit=25&until=2010-12-29T19%3A54%3A56%2B0000" response = urllib2.urlopen(url) print response.read() result in {"data":[]} ? But the same url produces a lot of data in a browser? Anyone? Best Regards.

    Read the article

  • encapsulation in python list (want to use " instead of ')

    - by Codehai
    I have a list of users users["pirates"] and they're stored in the format ['pirate1','pirate2']. If I hand the list over to a def and query for it in MongoDB, it returns data based on the first index (e.g. pirate1) only. If I hand over a list in the format ["pirate1","pirate"], it returns data based on all the elements in the list. So I think there's something wrong with the encapsulation of the elements in the list. My question: can I change the encapsulation from ' to " without replacing every ' on every element with a loop manually? Short Example: aList = list() # get pirate Stuff # users["pirates"] is a list returned by a former query # so e.g. users["pirates"][0] may be peter without any quotes for pirate in users["pirates"]: aList.append(pirate) aVar = pirateDef(aList) print(aVar) the definition: def pirateDef(inputList = list()): # prepare query col = mongoConnect().MYCOL # query for pirates Arrrr pirates = col.find({ "_id" : {"$in" : inputList}} ).sort("_id",1).limit(50) # loop over users userList = list() for person in pirates: # do stuff that has nothing to do with the problem # append user to userlist userList.append(person) return userList If the given list has ' encapsulation it returns: 'pirates': [{'pirate': 'Arrr', '_id': 'blabla'}] If capsulated with " it returns: 'pirates' : [{'_id': 'blabla', 'pirate' : 'Arrr'}, {'_id': 'blabla2', 'pirate' : 'cheers'}] EDIT: I tried figuring out, that the problem has to be in the MongoDB query. The list is handed over to the Def correctly, but after querying pirates only consists of 1 element... Thanks for helping me Codehai

    Read the article

  • creating new instance fails PHP

    - by as3isolib
    I am relatively new to PHP and having some decent success however I am running into this issue: If I try to create a new instance of the class GenericEntryVO, I get a 500 error with little to no helpful error information. However, if I use a generic object as the result, I get no errors. I'd like to be able to cast this object as a GenericEntryVO as I am using AMFPHP to communicate serialize data with a Flex client. I've read a few different ways to create constructors in PHP but the typical 'public function Foo()' for a class Foo was recommended for PHP 5.4.4 //in my EntryService.php class public function getEntryByID($id) { $link = mysqli_connect("localhost", "root", "root", "BabyTrackingAppDB"); if (mysqli_connect_errno()) { printf("Connect failed: %s\n", mysqli_connect_error()); exit(); } $query = "SELECT * FROM Entries WHERE id = '$id' LIMIT 1"; if ($result = mysqli_query($link, $query)) { // $entry = new GenericEntryVO(); this is where the problem lies! while ($row = mysqli_fetch_row($result)) { $entry->id = $row[0]; $entry->entryType = $row[1]; $entry->title = $row[2]; $entry->description = $row[3]; $entry->value = $row[4]; $entry->created = $row[5]; $entry->updated = $row[6]; } } mysqli_free_result($result); mysqli_close($link); return $entry; } //my GenericEntryVO.php class <?php class GenericEntryVO { public function __construct() { } public $id; public $title; public $entryType; public $description; public $value; public $created; public $updated; // public $properties; } ?>

    Read the article

  • SSIS String or binary data would be truncated. The statement has been terminated.

    - by Subbarao
    When I run SSIS package from BIDS it runs fine without any error / problem. When I try to call it through a ASP.NET website I get the following error - "String or binary data would be truncated. The statement has been terminated." I checked all the columns / data to see if anything is exceeding the limit, everything is fine. I can run the package through command line using dtexec C:dtexec /f "C:\temp\MyTempPackage.dtsx", it executes without any problem . The problem is when I try to run it through ASP.NET. The following is the code that I am trying to use - //DTS Runtime Application Application app = new Application(); //DTS Package Package package = app.LoadPackage(packagePath, null); //Execute and Get the result DTSExecResult result = package.Execute(); I am making a call to a webservice from asp.net which has the above code. Both the webservice and website have identity impersonation enabled. I have identity enabled in my web.config for this <identity impersonate="true" userName="MyUserName" password="MyPassword"/> This problem is only when I am trying to import a Excel file (.xlsx) when I import a .txt file everything is fine. Excel Import blew up in both 32bit and 64bit enviornments. Help on how to make this to work is greatly appreciated.

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >