Search Results

Search found 4737 results on 190 pages for 'samsung smart tv'.

Page 171/190 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

  • Network use of Gaming PC

    - by Matthew Patrick Cashatt
    Background After YEARS of waiting, I built the custom gaming PC of my dreams: Intel i7 - 975 Extreme Edition 3.3ghz (overclocked to 4.0) ATI Radeon 5970 2gb Corsair 256 gb SSD Drive 2 TB Sata II 3.0 7200rpm data drive 12 GB Kingston Hyper-X (1600mhz) DDR3 Windows 7 Ultra 64 bit And so on. . . Problem I hooked this beast up to our home theater and settled in for a great gaming season only to realize a couple of drawbacks: It's hard to accurately wax bad guys using a keyboard in your lap whilst reclined on your couch (and using a wireless keyboard). It's hard to read the text on the screen (i.e. menus, etc). I find that a 1:1 ratio (screen diagonal inch to inch away from screen) is optimum, but using the home theater, it's more like 1:3 which has me squinting unless I sit on the coffee table. The wife always seems to want the TV the same time I do and, unfortunately "Real Housewives of Beverly Hills" and Battlefield BC don't mix. I am losing the battle in the home theater room, but the PC has to stay there (long story). So, this leaves me with the option of playing in my home office which is about 30 feet away from the home theater. I am a software developer so I have a pretty decent set up in my office--multiple 1080p monitors, HP Envy 17 which can run games like Crysis in 720p with out stammering too much. Also, I can game very comfortably at my desk in the office. Still, even though the set up in my office can run games well enough, I don't want to regress to that when I have worked YEARS for an awesome gaming PC that can run everything on ultra high settings. My Question What are my options for running my games on the beastly desktop in the Home Theater, but physically playing in my office about 30 feet away? A really long HDMI cable? LAN/RDC? Details that May Help We have an open crawlspace so running cable from HT room to office is no problem. I already have networked the house with a LAN Any help is GREATLY appreciated. Thanks, Matt

    Read the article

  • Intel RST accidentally selected wrong drive as system drive -- how to fix?

    - by Sean Killeen
    Question / TL;DR If Intel RST has marked a drive other than my RAID set as the system drive, how can I get it so that the RAID set is now seen as the system drive, and catch it up to my drive now? What Happened NOTE: Some perhaps unwise decisions are ahead. This is as best as I can recall the order of things. I had a 2x1TB RAID1 config. I bought the drives around the same time, and they started to die around the same time. I replaced 1st drive with a 2 TB drive before the other one's SMART errors got more serious. I waited for the RAID to replicate, then replaced the 2nd drive with a manufacturer's replacement. I got a second manufacturer's drive replacement and used it as a spare. so I now I had a 1TB/2TB drive in a RAID1 and another 1TB as a spare. The 1TB drive in the replacement set was bad from the manufacturer. Rather than mess with their refurbished stuff, I bought another 2 TB drive an upped the config to a 2x2TB RAID1 with the other, functioning manufacturer's drive as a spare. I made the mistake of trying to bring the other drive online to clean it out and the signatue clash killed my machine. When the machine rebooted, that drive was marked as the system drive. So, I have a 2x2TB RAID1 that is apparently offline, and 1 spare 1 TB refurbished drive that everything is being run from. Not a great idea. Options I'm considering Bring the 2x2TB drive back online, and then unplug the spare until I can format it in another system. This would involve some data loss, but the more I think about it, I actually think I haven't modified any data that isn't backed up or synced somewhere (go me!) Anything that isn't is likely trivial, enough that I'm willing to take the risk. One downside here is that if the 2 TB doesn't have data on it for some reason, I could be screwed trying to put the other drive back in, no? Try to somehow get the RAID1 updated with the data from the current system drive. Option 3?

    Read the article

  • server 2008 r2 - wbadmin systemstatebackup - system writer not found in the backup

    - by TWood
    I am trying to manually run a systemstatebackup command on my server 2008 r2 box and I am getting an error code '2155347997' when I view the backup event log details. The command line tells me that I have log files written to the c:\windows\logs\windowsserverbackup\ path but I have no files of the .log type there. My command window tells me "System Writer is not found in the backup". However when I run vssadmin list writers I find System Writer in the list and it shows normal status with no last errors stored. I am running this from an elevated command prompt as well as from a logged on administrator account. My backup target path has permission for network service to have full control and it has plenty of free space. Looking in eventlog I have two VSS error 8194 that happen immediately before the Backup error 517 which has the errorcode 2155347997 listed. All three of these errors are a result of trying to run the command for the systemstatebackup. It's my belief that some VSS related permission is failing and exiting the backup process before it ever gets started. Because of this the initial code that creates the log files must not be running and this is why I have no files. When running the systemstatebackup command from the command prompt and watching the windowsserverbackup directory I do see that I have a Wbadmin.0.etl file which gets created but it is deleted when the backup errors out and stops. I have looked online and there are numerous opinions as to the cause of this error. These are the things I have corrected to try and fix this issue before posting here: Machine runs a HP 1410i smart array controller but at one time also used a LSI scsi card. Used networkadminkb.com's kb# a467 to find one LSI_SCSI entry in HKLMSysCurrentControlSetServices which start was set to 0x0 and I modified to 0x3. No changes. In HKLMSystemCurrentControlSetServicesVSSDiag I gave network service full control where it previously only had "Special Permission". No changes. I followed KB2009272 to manually try to fix system writer. These are all of the things I have tried. What else should I look at to resolve this issue? It may be important to note that I run Mozy Pro on this server and that was known in the past to use VSS for copying operations and it occasionally threw an error. However since an update last year those error event log entries have stopped.

    Read the article

  • Can't get my Raspberry Pi to keep a static IP

    - by JonnyIrving
    I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

    Read the article

  • filtering itunes library items by file location

    - by Cawas
    3 answers and unfortunately no solution yet. The Problem I've got way more than 1000 duplicated items in my iTunes Library pointing to a non-existant place (the "where" under "get info" window), along with other duplicated items and other MIAs (Missing In Action). Is there any simple way to just delete all of them and only them? From the library, of course. By that I mean some MIAs are pointing to /Volumes while some are pointing to .../music/Music/... or just .../music/.... I want to delete all pointing to /Volumes as to later I'll recover the rest. Check the image below. Some Background I tried searching for a specific key word on the path and creating smart play list, but with no result. Being able to just sort all library by path would be a perfect solution! I believe old iTunes could do that. PowerTunes can do it (sort by path) but I can't do anything with its list. I would also welcome any program able to handle this, then import and properly export back the iTunes library. Since this seems to just not be clear enough... AppleScript doesn't work That's because AppleScript just can't gather the missing info anywhere in iTunes Library. Maybe we could use AppleScript by opening the XML file, but that's a whole nother issue. Here's a quote from my conversation with Doug the man himself Adams last december: I don't think you do understand. There is no way to get the path to the file of a dead track because iTunes has "forgotten" it. That is, by definition, what a dead track is. Doug On Dec 21, 2010, at 7:08 AM, Caue Rego wrote: yes I understand that and have seem the script. but I'm not looking for the file. just the old broken path reference to it. Sent from my iPhone On 21/12/2010, at 10:00, Doug Adams wrote: You cannot locate missing files of dead tracks because, by definition, a dead track is one that doesn't have any file information. If you look at "Super Remove Dead Tracks", you will notice it looks for tracks that have "missing value" for the location property.

    Read the article

  • Are random packets normal?

    - by TheLQ
    About a month ago on one of my servers I started receiving random packets from IPs all over the world. So I did the smart thing and stopped putting off installing an IDS. This IDS is a ClearOS Gateway which comes with Snort and SnortSam. I enabled it, checked There is a total of 4 ports open, two of which forward to the server I'm talking about. These ports are 3724 and 8085, so they aren't going to be easily detected in a port scan. However checking some logs of this server I found that the attack is resuming. I found this ... Accepting connection from '75.166.155.122' [Auth] got unknown packet from '75.166.155.122' Accepting connection from '98.164.154.93' [Auth] got unknown packet from '98.164.154.93' Ping MySQL to keep connection alive Accepting connection from '70.241.195.129' [Auth] got unknown packet from '70.241.195.129' Accepting connection from '67.182.229.169' [Auth] got unknown packet from '67.182.229.169' Accepting connection from '69.137.140.38' [Auth] got unknown packet from '69.137.140.38' Accepting connection from '76.31.72.55' [Auth] got unknown packet from '76.31.72.55' Accepting connection from '97.88.139.39' [Auth] got unknown packet from '97.88.139.39' Accepting connection from '173.35.62.112' [Auth] got unknown packet from '173.35.62.112' Accepting connection from '187.15.10.73' [Auth] got unknown packet from '187.15.10.73' Accepting connection from '66.66.94.124' [Auth] got unknown packet from '66.66.94.124' Accepting connection from '75.159.219.124' [Auth] got unknown packet from '75.159.219.124' Accepting connection from '99.102.100.82' [Auth] got unknown packet from '99.102.100.82' Accepting connection from '24.128.240.45' [Auth] got unknown packet from '24.128.240.45' Accepting connection from '99.231.7.39' [Auth] got unknown packet from '99.231.7.39' Accepting connection from '206.255.79.56' [Auth] got unknown packet from '206.255.79.56' Accepting connection from '68.97.106.235' [Auth] got unknown packet from '68.97.106.235' Accepting connection from '69.134.67.251' [Auth] got unknown packet from '69.134.67.251' Accepting connection from '63.228.138.186' [Auth] got unknown packet from '63.228.138.186' Accepting connection from '184.39.146.193' [Auth] got unknown packet from '184.39.146.193' Accepting connection from '69.171.161.102' [Auth] got unknown packet from '69.171.161.102' Accepting connection from '76.0.47.228' [Auth] got unknown packet from '76.0.47.228' Ping MySQL to keep connection alive Accepting connection from '126.112.201.14' [Auth] got unknown packet from '126.112.201.14' Ping MySQL to keep connection alive Now that scares me. Why isn't Snort detecting this? How were they able to find this specific port? More importantly, what normally would these packets contain? Is this something I should be worried about? How can I stop this?

    Read the article

  • apache sendmail: trying to change user "from" address from apache to domain account

    - by Wes
    I apologize if I am asking a question already answered, but my problem isn't really that I haven't found an answer. I have, in fact, found a half-dozen different "solutions" to my problem, tried them all, in various combinations, and have been consistently unsuccessful. The goal All I want to do is change the envelope "from" address for all email sent from [email protected] to [email protected], always. What I've already done I am running Apache, PHP, and sendmail on CentOS 5.5, [email protected]. We have an SMTP server at 192.168.0.4. The domain's email accounts are all at @domain.org. I have successfully set up "smart host" using this line in the sendmail.mc file: define(`SMART_HOST', `192.168.0.4')dnl Then I set up masquerading, and was hopeful this would solve it. I have this in the .mc file: FEATURE(`masquerade_entire_domain')dnl FEATURE(`masquerade_envelope')dnl FEATURE(`allmasquerade')dnl MASQUERADE_AS(`domain.org')dnl MASQUERADE_DOMAIN(`domain.org.')dnl MASQUERADE_DOMAIN(`localhost.localdomain.')dnl This rewrites "to" addresses, but not "from" addresses. Testing from the command line: sendmail -v [email protected] Always is shown from the local user (in this case root, or my local user account). I had read that "sendmail" command sometimes bypasses masquerading. Nevertheless, using the "mail" command has the same result. After that, I have explored several "solutions", including: mailertable virtusertable FEATURE(`accept_unresolvable_domains')dnl LOCAL_DOMAIN(`localhost.localdomain')dnl FEATURE(`genericstable')dnl /etc/mail/access file /etc/mail/local-host-names file /etc/mail/trusted-users file All to no affect. The last thing I've tried So, I decided to go in a different direction, and try to set the envelope "from" address via PHP, using either the configuration in /etc/php.ini, or adding the -f parameter to the mail() function or to sendmail command. If I run this command: sendmail -v -f [email protected] [email protected] I get this error in /var/log/maillog: Mar 30 08:56:16 localhost sendmail[24022]: p2UCuE8w024022: [email protected], size=5, class=0, nrcpts=1, msgid=<[email protected]>, relay=user@localhost Mar 30 08:56:19 localhost sendmail[24022]: p2UCuE8w024022: [email protected], [email protected] (500/502), delay=00:00:05, xdelay=00:00:03, mailer=relay, pri=30005, relay=[192.168.0.4] [192.168.0.4], dsn=5.1.1, stat=User unknown Mar 30 08:56:19 localhost sendmail[24022]: p2UCuE8w024022: p2UCuE8x024022: DSN: User unknown Mar 30 08:56:23 localhost sendmail[24022]: p2UCuE8x024022: [email protected], delay=00:00:04, xdelay=00:00:04, mailer=relay, pri=31029, relay=[192.168.0.4] [192.168.0.4], dsn=2.0.0, stat=Sent (Ok: queued as B5E2E40E0A2) Which is basically a "User unknown" 550 error. Help Please help. What do I need to change? Should I just start over in the sendmail.mc file? It has a ton of config options stuffed in it, over days of trying things. Why is changing the envelope "from" address via the command line generating a "User unknown" error?

    Read the article

  • Windows 7 Home hangs at "Welcome" screen

    - by White Phoenix
    I'm asking on behalf of a friend who's currently having problems with his machine. Windows 7 Home 32-bit. He's too far away for me to help by going over to his house - I'm helping him over the Internet. This is his current machine: http://www.newegg.com/Product/Product.aspx?Item=N82E16883227134 The only two changes he made to that machine is to swap out the gfx card for a EVGA GTX 460 and the PSU for a Corsair TX650. Here's what happened: He was playing a computer game (fairly CPU/GPU intensive) and had some music going in the background in foobar while playing. Suddenly, he notices the music stopped playing, so he switches to foobar to try to close it, but it freezes up (window won't respond). So he figures it's just foobar having a bad day and force quits that program. Suddenly, his game won't respond, so he force quits that, then the entire computer just went to crap at that point, so he hits the restart button on his machine. Computer POSTS fine, but now he gets stuck at the Windows "welcome" screen (his account is set to auto-login). HD activity light is solid yellow but he doesn't hear HDD activity. He tried booting into Safe Mode - gets stuck at the "welcome screen". Tried a STartup Repair within Windows 7, it found a few problems, but still gets stuck at welcome. I advised him to boot off the DVD - sfc /scannow found nothing (couldn't use the regular /scannow option; says there's a repair pending, had to use use offbootdir/offwindir command switches). Ran startup repair 3 times - found nothing. My friend runs virus/malware scans on a regular basis, so he's fairly sure it's not that either. Right now I'm having my friend run chkdsk /R on the computer while in this Startup Recovery mode - so far it's caught a few bad sectors. However at this point I'm kinda wondering which way to go if chkdsk doesn't fix it. Quick Google search said someone had success by booting Windows with bootlogging on - some others have success with running the aforemented chkdsk, etc. The fact that Windows cannot even boot into Safe Mode concerns me. While we're waiting for chkdsk /R to finish, are there any other options I can give my friend short of reinstalling Windows 7? He has his data on a separate partition so that's not a major problem (though it'll be an annoyance for him). I suspect his hard drive may be having some issues, but my main concern is getting him back up and running before we start diagnosing the hard drive (I may have him run some sort of SMART test utility later).

    Read the article

  • Windows Server 2008 Software Raid 5 - Data integrity issues

    - by Fopedush
    I've got a server running Windows Server 2008 R2, with a (windows native) software raid-5 array. The array consists of 7x 1TB Western Digital RE3 and RE4 drives. I have offline backups of this array. The problem is this: I noticed a few days ago after copying a large file to the disk that there was an integrity issue with that file - it was a ~12GB file that I had downloaded via uTorrent. After moving it to the raid array, I used uTorrent to relocate the download location, and performed a re-check so I could seed it from that location. The recheck found that only 6308/6310 chunks of the copied file were intact. My next step was to write a quick powershell script that would copy files to the array, while performing a SHA1 hash of the original and resultant files and comparing them. Smaller files (100-1000MB) copied over just fine. When I started copying larger data (~15GB), I found that the hash check failed about 2/3rds of the time. The corrupt files had very, very small inconsistencies - less than .01%. I further eliminated the possibility of networking or client issues by placing this large file on the C:\ of the server, and copying it repeatedly from there to the array, seeing similar results. Copying the data via explorer, powershell, or the standard windows command prompt yield the same results. None of the copies fail or report any problems. The raid array itself is listed as healthy in disk management. After a few experiments, I shut down the server and ran memtest overnight. No errors were detected. A basic run of chkdsk found no problems, but I did not use the /R flag, as I was unsure how that might affect a software raid-5 volume. I next ran Crystal Disk Info to check the smart data on the drives - but found that CDI only detected 5 out of 7 of the disks in the array. I have no idea why. Nevertheless, CDI shows the following "caution" flags on a single one of the drives: 05 199 199 140 000000000001 Reallocated Sectors Count C5 200 200 __0 000000000001 Current Pending Sector Count Which is a little bit alarming, but I don't really know what to do with the information. I hardly feel like one reallocated sector could be causing this. At this point, I'm looking for some guidance on what to do next. I need to determine the cause of this issue, but I'm hesitant to run chkdsk /R or any bootable disk health checkers because I'm afraid they might break the array. I've considered triggering a re-sync of the array, but I'm not actually sure how to do that without doing something silly like manually dropping a disk and then restoring it. Any advice that could help me ferret out the precise cause of this issue would be greatly appreciated.

    Read the article

  • file corruption on read/write 2.6.32-22-server (happens across many kernels)

    - by Jonathan
    Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

    Read the article

  • Change Logon DPI setting in Windows 8.1

    - by jmc302005
    I love how M$ keeps making decisions for me about how I want my desktop to look. Now they have added per-user dpi settings. The problem this has created is that there is no adjustable dpi setting for the Lock/Logon screen. Let me explain. you can change the dpi setting to be the same across all displays and this does affect the icons and font on the lock/logon screen. However it does not affect any app/program that can run on the lock/logon screen. Ex. I use a 44" flat screen tv for my monitor on my desktop. Big enough for me to sit in my recliner and use my comp. But I don't have a wireless keyboard. And it sucks having the wire from the keyboard running across the floor. Plus I really don't want to keep a keyboard next to me. So I use the on screen keyboard for logging in and quick typing (search, web address, etc.) So the problem is that with the new dpi setup my on screen keyboard takes up nearly half the screen. Does M$ think we are all blind? Oh no I remember they think desktops should look like tablets and phones. I tried looking through the registry to see if I could find a setting for it. In the key HKEY_USERS.DEFAULT\Control Panel\Desktop there is a string value named "LogicalDPIOverride" with a value of -1. I have a feeling this is where I can fix the issue. I tried changing the value to 0 and to 1 with no change in the result. Instead I noticed that after logging out and back in the -1 value was back in the registry. So now M$ has also added a way for us to not be able to change a setting in the registry. They are making it harder and harder for us power users to be able to do anything with the settings in windows. Soon we will all have the same exact Windows with absolutely no customization. ok sorry for the quick rant. The real question here is. How can I change this defualt dpi crap? Can I use the LogPixels string that worked for dpi in Windows 7? Here are 2 Screen shots 1 of the Lock Screen and 1 of the Logon Screen http://i.imgur.com/6RM5ufE.jpg http://i.imgur.com/cnY5bmm.jpg Please any help will be appreciated.

    Read the article

  • SSL support with Apache and Proxytunnel

    - by whuppy
    I'm inside a strict corporate environment. https traffic goes out via an internal proxy (for this example it's 10.10.04.33:8443) that's smart enough to block ssh'ing directly to ssh.glakspod.org:443. I can get out via proxytunnel. I set up an apache2 VirtualHost at ssh.glakspod.org:443 thus: ServerAdmin [email protected] ServerName ssh.glakspod.org <!-- Proxy Section --> <!-- Used in conjunction with ProxyTunnel --> <!-- proxytunnel -q -p 10.10.04.33:8443 -r ssh.glakspod.org:443 -d %host:%port --> ProxyRequests on ProxyVia on AllowCONNECT 22 <Proxy *> Order deny,allow Deny from all Allow from 74.101 </Proxy> So far so good: I hit the Apache proxy with a CONNECT and then PuTTY and my ssh server shake hands and I'm off to the races. There are, however, two problems with this setup: The internal proxy server can sniff my CONNECT request and also see that an SSH handshake is taking place. I want the entire connection between my desktop and ssh.glakspod.org:443 to look like HTTPS traffic no matter how closely the internal proxy inspects it. I can't get the VirtualHost to be a regular https site while proxying. I'd like the proxy to coexist with something like this: SSLEngine on SSLProxyEngine on SSLCertificateFile /path/to/ca/samapache.crt SSLCertificateKeyFile /path/to/ca/samapache.key SSLCACertificateFile /path/to/ca/ca.crt DocumentRoot /mnt/wallabee/www/html <Directory /mnt/wallabee/www/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <!-- Need a valid client cert to get into the sanctum --> <Directory /mnt/wallabee/www/html/sanctum> SSLVerifyClient require SSLOptions +FakeBasicAuth +ExportCertData SSLVerifyDepth 1 </Directory> So my question is: How to I enable SSL support on the ssh.glakspod.org:443 VirtualHost that will work with ProxyTunnel? I've tried various combinations of proxytunnel's -e, -E, and -X flags without any luck. The only lead I've found is Apache Bug No. 29744, but I haven't been able to find a patch that will install cleanly on Ubuntu Jaunty's Apache version 2.2.11-2ubuntu2.6. Thanks in advance.

    Read the article

  • HOW TO Convert DVD to iPad(Also converts to iPods)?

    - by goodm
    DVD to iPad Converter (Also converts to iPods) DVD to iPad Converter is the easiest-to-use and fastest DVD to iPad converter for Apple iPad movie and iPad video. It can convert almost any kind of DVD to iPad movie or iPad video format. It is also a powerful DVD to iPad converter with a conversion speed that is much faster than real-time. With this converter, you can use your iPad as a portable DVD player and enjoy your favorite DVDs on your iPad. http://www.softseeking.com/prodail.aspx?proid=83" Features of this DVD to iPad Converter Three Running Modes --In Direct Mode, you can directly click the DVD menu to select the movie you want to rip. This mode is very easy for ripping DVD movies. --In Batch Mode, you can select the DVD titles or chapters you want to rip via a checkbox list. This mode is very easy for batch ripping music DVDs, MTV DVDs and episodic DVDs. --In 1-Click Mode, you just need one click to open a DVD, after which the rest of the task will be done automatically. This is a “designed-for-dummies” mode. Input Types You can convert almost any kind of DVD format to iPad. Output Splitting You can split your output video by DVD chapters and titles. Fully supports MTV DVDs and episodic DVDs. File Size and Quality Adjustment You can customize the output file size and corresponding video quality. Flexible Output Profiles You can easily customize the various video settings such as brightness, bit rate, etc. Language Selection for Subtitles and Audio Track In Direct mode and in Batch mode, you can select the subtitle and audio track language. (In 1-Click mode, the default language is chosen automatically). Video Crop You can crop your video to 16:9, 4:3, full screen, etc. Video Resize You can resize your video. For example, you can set it to "Keep aspect ratio" or "Stretch to fit screen." Other Converts DVD to MP3 audio. Supports Dolby, DTS Surround audio track. Converts to the latest iPhone, 4th generation iPad nano, nano chromatic, 2nd generation iPad touch, and Apple TV.

    Read the article

  • How to circumvent ISP Limiting "Unknown" traffic - (SSH)Proxy, VPN

    - by connery
    I am having issues with using a proxy/VPN, with my current ISP (Comenersol, Spain). From my point of view they limit traffic by protocol or by traffic they "know" and "dont know". I'll explain my findings so far below. Internet connection in Spain: ~400-420KByte/sec (speedtest.net) OpenVPN Server in Sweden(pfsense): 100/100Mbit. LZO Compression. TCP. Tun. Aes128 Squid Proxy server in Sweden (pfsense): 100/100 (same box as the vpn server). Plain, no encryption. Runs in stealth mode to hide the use of proxy. NOT running OpenVPN or Squid Proxy, this is my findings: When I download a file from my pfsense box in Sweden, I get maximum speed When I run speedtest.net and choose any european server (including Swedish), I get max speed When I download a torrent (with non default port above 10K), I get limited to ~100KByte/sec. Encryption is turned off If I download something through https, I get max speed Running either Squid Proxy or VPN, this is my findings When I download a file from my pfsense box in Sweden, I get ~100KByte/sec When I run speedtest.net and choose any european server (including Swedish and Spanish), I get ~100Kbyte/sec When I download a torrent, I get same limitation ~100KByte/sec When I download something through https, I get ~100KByte/sec I verify the speeds above with speedtest.net measure, firefox measure in addition to having bmon running in terminal in the background. This way I am certain that the speeds I get presented, are in fact correct. If I connect through a different ISP with VPN or Squid Proxy, I get better speeds (400KByte/sec ++) In short: Whenever I tunnel my traffic through Sweden, my SPanish ISP throttles the traffic. I thought tunneling it through Squid would solve the issue, since I then would no longer hide my traffic through encryption. This does not seem to be the case. Wget and fetch gives same result. I did not try 'nc', but I assume this would give the same result. Does anyone know how to circumvent this issue? I would very much like to be able to get full speed with Swedish ip, as this would make me able to stream TV at higher quality than today. 100KByte/sec just does not cut it quality wise. Thanks for reading. Looking forward for your help.

    Read the article

  • Varnish server in front of nginx server with multiple virtualhosts

    - by Garreth 00
    I have tried to search for a solution for this, but can't find any documentation/tips on my specific setup. My setup: Backendserver: ngnix: 2 different websites (2 top domains) in virtualenv, running gunicorn/python/django Backendserver hardware(VPS) 2gb ram, 8 CPU Databaseserver: postgresql - pg_bouncer Backendserver hardware (VPS) 1gb ram, 8 CPU Varnishserver: only running varnish Varnishserver hardware (VPS) 1gb ram, 8 CPU I'm trying to set up a varnish server to handle rare spike in traffic (20 000 unique req/s) The spike happens when a tv program mention one of the sites. What do I need to do, to make the varnish server cache both sites/domains on my backendserver? My /etc/varnish/default.vcl : backend django_backend { .host = "local.backendserver.com"; .port = "8080"; } My /usr/local/nginx/site-avaible/domain1.com upstream gunicorn_domain1 { server unix:/home/<USER>/.virtualenvs/<DOMAIN1>/<APP1>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain1.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80 default_server; listen 8080; client_max_body_size 4G; server_name www.domain1.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain1; break; } } } My /usr/local/nginx/site-avaible/domain2.com upstream gunicorn_domain2 { server unix:/home/<USER>/.virtualenvs/<DOMAIN2>/<APP2>/run/gunicorn.sock fail_timeout=0; } server { listen 80; listen 8080; server_name domain2.com; rewrite ^ http://www.domains.com$request_uri? permanent; } server { listen 80; listen 8080; client_max_body_size 4G; server_name www.domain2.com; keepalive_timeout 5; # path for static files root /home/<USER>/<APP>-media/; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (!-f $request_filename) { proxy_pass http://gunicorn_domain2; break; } } } Right now, If I try the Ip of the varnishserver I only get served domain1.com. Would everything be correct if I change the DNS of the two domain to point to the varnishserver, or is there extra setup before it would work? Question 2: Do I need a dedicated server for varnish, or could I just install varnish on my backendserver, or would the server run out of memory quick?

    Read the article

  • Python and displaying HTML

    - by Tyler Seymour
    I've gotten pretty comfortable with Python and now I'm looking to make a rudimentary web application. I was somewhat scared of Django and the other Python frameworks so I went caveman on it and decided to generate the HTML myself using another Python script. Maybe this is how you do it anyways - but I'm just figuring this stuff out. I'm really looking for a tip-off on, well, what to do next. My Python script PRINTS the HTML (is this even correct? I need it to be on a webpage!), but now what? Thanks for your continued support during my learning process. One day I will post answers! -Tyler Here's my code: from SearchPhone import SearchPhone phones = ["Iphone 3", "Iphone 4", "Iphone 5","Galaxy s3", "Galaxy s2", "LG Lucid", "LG Esteem", "HTC One S", "Droid 4", "Droid RAZR MAXX", "HTC EVO", "Galaxy Nexus", "LG Optimus 2", "LG Ignite", "Galaxy Note", "HTC Amaze", "HTC Rezound", "HTC Vivid", "HTC Rhyme", "Motorola Photon", "Motorola Milestone", "myTouch slide", "HTC Status", "Droid 3", "HTC Evo 3d", "HTC Wildfire", "LG Optimus 3d", "HTC ThunderBolt", "Incredible 2", "Kyocera Echo", "Galaxy S 4g", "HTC Inspire", "LG Optimus 2x", "Samsung Gem", "HTC Evo Shift", "Nexus S", "LG Axis", "Droid 2", "G2", "Droid x", "Droid Incredible" ] print """<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>table of phones</title> </head> <body> </body> </html> """ #table print '<table width="100%" border="1">' for x in phones: y = SearchPhone(x) print "\t<tr>" print "\t\t<td>" + str(y[0]) + "</td>" print "\t\t<td>" + str(y[1]) + "</td>" print "\t\t<td>" + str(y[2]) + "</td>" print "\t\t<td>" + str(y[3]) + "</td>" print "\t\t<td>" + str(y[4]) + "</td>" print "\t</tr>" print "</table>

    Read the article

  • Android - cant read TXT files from SDcard on real mashine?

    - by JustMe
    Hello! When I run the code bellow in the virtual android (1.5) it works well, TextSwitcher shows first 80 chars from each txt file from /sdcard/documents/ , but when I run it on my Samsung Galaxy i7500 (1.6) there are no contents in TextSwitcher, however in LogCat there are FileNames of txt files. My Code: public void getTxtFiles(){ //Scan /sdcard/documents and put .txt files in array File TxtFiles[] String path = Environment.getExternalStorageDirectory().toString()+"/documents/"; String files; File folder = new File(path); if(folder.exists()==false){if (!folder.mkdirs()) { Log.e("TAG", "Create dir in sdcard failed"); return; }} else{ File listOfFiles[] = folder.listFiles(); for (int i = 0; i < listOfFiles.length; i++) { if (listOfFiles[i].isFile()) { files = listOfFiles[i].getName(); if (files.endsWith(".txt") || files.endsWith(".TXT")) { if((files.length()-1)>i){resizeArray(TxtFiles, files.length()+10);} TxtFiles[i]=listOfFiles[i]; System.out.println(TxtFiles[i]); } } }} } private void updateCounter(int Pozicija) { if(Pozicija<0){Toast.makeText(getApplicationContext(), R.string.LastTxt, 5).show(); mCounter++;} else if(TxtFiles[mCounter]!=null){ TextToShow = getContents(TxtFiles[mCounter]); if(TextToShow.length()>80)TextToShow=TextToShow.substring(0, 80); mSwitcher.setText(TextToShow); System.out.println(Pozicija); } else mCounter--; } static public String getContents(File aFile) { //...checks on aFile are elided StringBuilder contents = new StringBuilder(); try { //use buffering, reading one line at a time //FileReader always assumes default encoding is OK! BufferedReader input = new BufferedReader(new FileReader(aFile)); try { String line = null; //not declared within while loop /* * readLine is a bit quirky : * it returns the content of a line MINUS the newline. * it returns null only for the END of the stream. * it returns an empty String if two newlines appear in a row. */ while (( line = input.readLine()) != null){ contents.append(line); contents.append(System.getProperty("line.separator")); } } finally { input.close(); } } catch (IOException ex){ ex.printStackTrace(); } return contents.toString(); } And I am able to write contents of those files though LogCat! Any ideas?

    Read the article

  • How to enjoy DVD on Apple iPad

    - by user44251
    I believe many people spent a sleepless night yesterday waiting for the new Apple Tablet to come, just a few days ago or perhaps longer I noticed fierce debate about it, its name, size, capacity, processor, main features, price etc. And now, they can take a long breath with the new Apple Tablet named iPad officially released on 28, January, 2010 (Beijing Time). But I know a new battle just begins. iPad, sounds somewhat like iPod and it really shares some similarities in terms of shape like smart, light and portable. It has a 9.7-inch, LED-backlit, IPS display with a remarkable precise Multi-Touch screen. And yet, at just 1.5 lbs and 0.5 inches thin, it's easy to carry and use everywhere. It can greatly facilitates your experience with the web, emails, photos and videos. Right now, it can run almost 140.000 of the apps on the Apple store. It can even run the apps you have downloaded for your iPhone or iPod touch. But so far, I haven't seen any possibility that it can work with DVD, probability there is no built-in DVD-ROM or DVD player which can play DVD directly. As Apple iPad states, the video formats supported are MPEG-4 (MP4, M4V), H.264, MOV etc and audio formats accepted are AAC, Proteceted AAC, MP3, AIFF and WAV etc, those are formats that are commonly used with iMac. This could really a hard nut to crack if you want to watch your favourite DVD on this magic Apple iPad. But don't worry, there is still way out, you just need a few steps for ripping and importing DVD movies to Apple iPad with a simple application DVD to iPad converter What's on DVD to iPad Converter for Mac DVD to iPad converter for Mac is a powerful and professional application designed for the newly released Apple iPad which can rip, convert your DVD contents to Apple iPad compatible MPEG-4 (MP4, M4V), H.264, MOV etc, and other popular file formats like AVI, WMV, MPG, MKV, VOB, 3GP, FLV etc can also be converted so that you can put on your portable devices like iPod, iPhone, iRiver, BlackBerry etc. Besides, it can also extract audio from DVD videos and save as MP3, AIFF, AAC, WAV etc. Mac DVD to iPad converter has also been enhanced that can run both on PowerPC and Intel (Snow Leopard included). It can offer versatile editing features which allows you to make your own DVD videos. For example, you can cut your DVD to whatever length you like by Trim, crop off unwanted parts from DVD clips by Crop, add special effect like Gray, Emboss and Old film to make your videos more artistic. Besides, its built-in merging feature and batch mode allows you to join several DVD clips into a single one and do batch conversion. And more features can be expected if you afford a few minutes to try.

    Read the article

  • HP Proliant G7 hardware RAID configuration automation with ribcl

    - by karthik
    I have been trying to automate hardware RAID configuration of HP proliant machines before OS installation (So I can not use hpacucli) ssh into iLO3 doesn't have option for RAID configuration I use ribcl but there is no command for RAID config, however I see this under the command GET_EMBEDDED_HEALTH. <STORAGE> <CONTROLLER> <LABEL VALUE="Controller on System Board"/> <STATUS VALUE="OK"/> <CONTROLLER_STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="50014380215F0070"/> <MODEL VALUE="HP Smart Array P420i Controller"/> <FW_VERSION VALUE="3.41"/> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 1I Box 1"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="04"/> </DRIVE_ENCLOSURE> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 2I Box 0"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="01"/> </DRIVE_ENCLOSURE> <LOGICAL_DRIVE> <LABEL VALUE="01"/> <STATUS VALUE="OK"/> <CAPACITY VALUE="68 GB"/> <FAULT_TOLERANCE VALUE="RAID 0"/> <PHYSICAL_DRIVE> <LABEL VALUE="Port 1I Box 1 Bay 3"/> <STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="6TA0N3SZ0000B231CYDT"/> <MODEL VALUE="EH0072FAWJA"/> <CAPACITY VALUE="68 GB"/> <LOCATION VALUE="Port 1I Box 1 Bay 3"/> <FW_VERSION VALUE="HPDH"/> <DRIVE_CONFIGURATION VALUE="Configured"/> </PHYSICAL_DRIVE> </LOGICAL_DRIVE> </CONTROLLER> </STORAGE> My question is, is there a way I modify/create this xml piece (say I have 2 Logical drive with one spare) and reboot the server it takes effect ? If this approach is not correct are there any other ways to automate hardware raid config ?

    Read the article

  • Is there a Distributed SAN/Storage System out there?

    - by Joel Coel
    Like many other places, we ask our users not to save files to their local machines. Instead, we encourage that they be put on a file server so that others (with appropriate permissions) can use them and that the files are backed up properly. The result of this is that most users have large hard drives that are sitting mainly empty. It's 2010 now. Surely there is a system out there that lets you turn that empty space into a virtual SAN or document library? What I envision is a client program that is pushed out to users' PCs that coordinates with a central server. The server looks to users just like a normal file server, but instead of keeping entire file contents it merely keeps a record of where those files can be found among various user PCs. It then coordinates with the right clients to serve up file requests. The client software would be able to respond to such requests directly, as well as be smart enough to cache recent files locally. For redundancy the server could make sure files are copied to multiple PCs, perhaps allowing you to define groups in different locations so that an instance of the entire repository lives in each group to protect against a disaster in one building taking down everything else. Obviously you wouldn't point your database server here, but for simpler things I see several advantages: Files can often be transferred from a nearer machine. Disk space grows automatically as your company does. Should ultimately be cheaper, as you don't need to keep a separate set of disks I can see a few downsides as well: Occasional degradation of user pc performance, if the machine has to serve or accept a large file transfer during a busy period. Writes have to be propogated around the network several times (though I suspect this isn't really much of a problem, as reading happens in most places more than writing) Still need a way to send a complete copy of the data offsite occasionally, and this would make it very hard to do differentials Think of this like a cloud storage system that lives entirely within your corporate LAN and makes use of your existing user equipment. Our old main file server is due for retirement in about 2 years, and I'm looking into replacing it with a small SAN. I'm thinking something like this would be a better fit. As a school, we have a couple computer labs I can leave running that would be perfect for adding a little extra redundancy to the system. Unfortunately, the closest thing I can find is Dienst, and it's just a paper that dates back to 1994. Am I just using the wrong buzzwords in my searches, or does this really not exist? If not, is there a big downside that I'm missing?

    Read the article

  • If Nvidia Shield can stream a game via wifi, why can I not do the same via ethernet to any other PC?

    - by Enigma
    I think it absurd that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. I can only assume that there must be some reason behind this or a limitation preventing this, but what? 150mbps wifi is in no way superior to a 1000mbps LAN connection aside from well wireless mobility. Not only that but I have a secondary laptop and desktop which should by hardware comparison completely outperform anything the Tegra in the Nvidia Shield can do. Is this all just a marketing scheme to force people to buy the shield for the streaming benefit? Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable for me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? (*) - perhaps this isn't the first but afaik it is the first complete package.

    Read the article

  • New harddrives failing within weeks.

    - by Jason Kealey
    I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

    Read the article

  • ffmpeg - join / merge on top of each other

    - by AisIceEyes
    I'm trying to join together two videos on top of each other. I already did these two ffmpeg commands ffmpeg -i 2_Out_of_Control.VOB -aspect 16:9 \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1280:720,boxblur=lp=13" \ -c:v libx264 -preset medium \ -c:a copy \ '2(blurred)Out_of_Control.mp4' ffmpeg -i 2_Out_of_Control.VOB \ -vf "yadif=0:-1:0,crop=w=714:h=476:x=6:y=0,scale=1080:720" \ -c:v libx264 -preset medium \ -c:a copy \ '2(clear)Out_of_Control.mp4' I'm currently stuck on making the "clear" version on top of the "blurred" version. I'm not sure how to do that. Can anybody help please? Been googling for around 2 days already. Only achieved it by using OpenShot but yeah, would prefer if there is an ffmpeg command to merge the two videos on top of each other. Edit: I want the "clear" video to be at the center at the top of the "blurred" video Edit2: console output would be the same as above: ffmpeg -i 2(blurred)Out_of_Control.mp4 \ -i 2(clear)Out_of_Control.mp4 \ -aspect 16:9 \ -vf <just something that will join the two together: the blurred at the bottom, clear at top that is centered> \ -c:v libx264 -preset medium \ -c:a copy \ '2_Out_of_Control_VOB.mp4' Edit3: here is the output when I used ffmpeg -i 2_Out_of_Control.VOB $ ffmpeg -i 2_Out_of_Control.VOB ffmpeg version git-2013-10-03-c7fe2a3 Copyright (c) 2000-2013 the FFmpeg developers built on Oct 4 2013 05:22:06 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --prefix=/home/username/ffmpeg_build --extra-cflags=-I/home/username/ffmpeg_build/include --extra-ldflags=-L/home/username/ffmpeg_build/lib --bindir=/home/username/bin --extra-libs=-ldl --enable-gpl --enable-libass --enable-libfdk-aac --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-x11grab libavutil 52. 46.100 / 52. 46.100 libavcodec 55. 34.100 / 55. 34.100 libavformat 55. 19.100 / 55. 19.100 libavdevice 55. 3.100 / 55. 3.100 libavfilter 3. 88.101 / 3. 88.101 libswscale 2. 5.100 / 2. 5.100 libswresample 0. 17.103 / 0. 17.103 libpostproc 52. 3.100 / 52. 3.100 Input #0, mpeg, from '2_Out_of_Control.VOB': Duration: 00:05:00.01, start: 0.500000, bitrate: 4574 kb/s Stream #0:0[0x1e0]: Video: mpeg2video (Main), yuv420p(tv, smpte170m), 720x480 [SAR 8:9 DAR 4:3], max. 9334 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0:1[0x80]: Audio: ac3, 48000 Hz, stereo, fltp, 384 kb/s At least one output file must be specified $

    Read the article

  • Bitmap brightness issue in c++

    - by Suriyan Suresh
    I have used the following code to adjust the image brightness, i am testing this application in Samsung BADA Platform and its SDK, While i am running this application in bada simulator it never ends runs infinity. Please point out the mistake in the code int BitmapWidth = 0, BitmapHeight = 0; result r = E_SUCCESS; BufferInfo myBuffer; Osp::Media::Image *pImage = null; Osp::Graphics::Canvas *pCanvas = null; Osp::Graphics::Rectangle *pRect = null; String path("/Media/Images/tom1.jpg"); pImage = new Osp::Media::Image(); r = pImage->Construct(); pBitmap2 = pImage->DecodeN(path, BITMAP_PIXEL_FORMAT_ARGB8888,LCD_WIDTH, LCD_HEIGHT); BitmapWidth = pBitmap2->GetWidth(); BitmapHeight = pBitmap2->GetHeight(); pBitmap2->Lock( myBuffer); int nVal = 0; int stride = myBuffer.pitch; byte *p= (byte *)(void *)myBuffer.pPixels; int nWidth = BitmapWidth *3; int nOffset = stride - BitmapWidth*4; for (int y = 0; y < BitmapHeight; ++y) { for (int x = 0; x < nWidth; ++x) { nVal = (int) (p[0] + nBrightness); if (nVal < 0) nVal = 0; if (nVal > 255) nVal = 255; p[0] = (byte) nVal; ++p; } p+= nOffset; } pBitmap2->Unlock(); pCanvas = GetCanvasN(); // Step 3: Create Rectangle pRect = new Osp::Graphics::Rectangle(0, 0, LCD_WIDTH, LCD_HEIGHT); r = pCanvas->DrawBitmap(*pRect, *pBitmap2); pCanvas->Show(); RequestRedraw(true); delete pBitmap2; delete pCanvas; delete pRect;

    Read the article

  • Espeak SAPI/dll usage on Windows ?

    - by Quandary
    Question: I am trying to use the espeak text-to-speech engine. So for I got it working wounderfully on linux (code below). Now I wanted to port this basic program to windows, too, but it's nearly impossible... Part of the problem is that the windows dll only allows for AUDIO_OUTPUT_SYNCHRONOUS, which means it requires a callback, but I can't figure out how to play the audio from the callback... First it crashed, then I realized, I need a callback function, now I get the data in the callback function, but I don't know how to play it... as it is neither a wav file nor plays automatically as on Linux. The sourceforge site is rather useless, because it basically says use the SAPI version, but then there is no example on how to use the sapi espeak dll... Anyway, here's my code, can anybody help? #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include //#include "speak_lib.h" include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int samplerate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ const char *data_path = NULL; // use default path for espeak-data int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); strcpy(voicename, "default"); // espeak --voices strcpy(voicename, "german"); strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; espeak_SetVoiceByProperties(voice_spec); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); espeak_Terminate(); printf("Espeak terminated\n"); return EXIT_SUCCESS; } /* if(espeak_SetVoiceByName(voicename) != EE_OK) { memset(&voice_select,0,sizeof(voice_select)); voice_select.languages = voicename; if(espeak_SetVoiceByProperties(&voice_select) != EE_OK) { fprintf(stderr,"%svoice '%s'\n",err_load,voicename); exit(2); } } */ The above code is for Linux. The below code is about as far as I got on Vista x64 (32 bit emu): #ifdef __cplusplus #include <cstdio> #include <cstdlib> #include <cstring> else #include <stdio.h> #include <stdlib.h> #include <string.h> endif include include include "speak_lib.h" //#include "espeak/speak_lib.h" // libespeak-dev: /usr/include/espeak/speak_lib.h // apt-get install libespeak-dev // apt-get install libportaudio-dev // g++ -o mine mine.cpp -lespeak // g++ -o mine mine.cpp -I/usr/include/espeak/ -lespeak // gcc -o mine mine.cpp -I/usr/include/espeak/ -lespeak char voicename[40]; int iSampleRate; int quiet = 0; static char genders[4] = {' ','M','F',' '}; //const char *data_path = "/usr/share/"; // /usr/share/espeak-data/ //const char *data_path = NULL; // use default path for espeak-data const char *data_path = "C:\Users\Username\Desktop\espeak-1.43-source\espeak-1.43-source\"; int strrcmp(const char *s, const char *sub) { int slen = strlen(s); int sublen = strlen(sub); return memcmp(s + slen - sublen, sub, sublen); } char * strrcpy(char *dest, const char *source) { // Pre assertions assert(dest != NULL); assert(source != NULL); assert(dest != source); // tk: parentheses while((*dest++ = *source++)) ; return(--dest); } const char* GetLanguageVoiceName(const char* pszShortSign) { #define LANGUAGE_LENGTH 30 static char szReturnValue[LANGUAGE_LENGTH] ; memset(szReturnValue, 0, LANGUAGE_LENGTH); for (int i = 0; pszShortSign[i] != '\0'; ++i) szReturnValue[i] = (char) tolower(pszShortSign[i]); const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { if( !strrcmp( v->languages, szReturnValue) ) { strcpy(szReturnValue, v->name); return szReturnValue; } } // End for strcpy(szReturnValue, "default"); return szReturnValue; } // End function getvoicename void ListVoices() { const espeak_VOICE **voices; espeak_VOICE voice_select; voices = espeak_ListVoices(NULL); const espeak_VOICE *v; for(int ix=0; (v = voices[ix]) != NULL; ix++) { printf("Shortsign: %s\n", v->languages); printf("age: %d\n", v->age); printf("gender: %c\n", genders[v->gender]); printf("name: %s\n", v->name); printf("\n\n"); } // End for } // End function getvoicename /* Callback from espeak. Directly speaks using AudioTrack. */ define LOGI(x) printf("%s\n", x) static int AndroidEspeakDirectSpeechCallback(short *wav, int numsamples, espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakDirectSpeechCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } if (numsamples > 0) { //audout->write(wav, sizeof(short) * numsamples); sprintf(buf, "AudioTrack wrote: %d bytes", sizeof(short) * numsamples); LOGI(buf); } return 0; // continue synthesis (1 is to abort) } static int AndroidEspeakSynthToFileCallback(short *wav, int numsamples,espeak_EVENT *events) { char buf[100]; sprintf(buf, "AndroidEspeakSynthToFileCallback: %d samples", numsamples); LOGI(buf); if (wav == NULL) { LOGI("Null: speech has completed"); } // The user data should contain the file pointer of the file to write to //void* user_data = events->user_data; FILE* user_data = fopen ( "myfile1.wav" , "ab" ); FILE* fp = static_cast<FILE *>(user_data); // Write all of the samples fwrite(wav, sizeof(short), numsamples, fp); return 0; // continue synthesis (1 is to abort) } int main() { printf("Hello World!\n"); const char* szVersionInfo = espeak_Info(NULL); printf("Espeak version: %s\n", szVersionInfo); iSampleRate = espeak_Initialize(AUDIO_OUTPUT_SYNCHRONOUS, 4096, data_path, 0); if (iSampleRate <= 0) { printf("Unable to initialize espeak"); return EXIT_FAILURE; } //samplerate = espeak_Initialize(AUDIO_OUTPUT_PLAYBACK,0,data_path,0); //ListVoices(); strcpy(voicename, "default"); // espeak --voices //strcpy(voicename, "german"); //strcpy(voicename, GetLanguageVoiceName("DE")); if(espeak_SetVoiceByName(voicename) != EE_OK) { printf("Espeak setvoice error...\n"); } static char word[200] = "Hello World" ; strcpy(word, "TV-fäns aufgepasst, es ist 20 Uhr 15. Zeit für Rambo 3"); strcpy(word, "Unnamed Player wurde zum Opfer von GSG9"); int speed = 220; int volume = 500; // volume in range 0-100 0=silence int pitch = 50; // base pitch, range 0-100. 50=normal // espeak.cpp 625 espeak_SetParameter(espeakRATE, speed, 0); espeak_SetParameter(espeakVOLUME,volume,0); espeak_SetParameter(espeakPITCH,pitch,0); // espeakRANGE: pitch range, range 0-100. 0-monotone, 50=normal // espeakPUNCTUATION: which punctuation characters to announce: // value in espeak_PUNCT_TYPE (none, all, some), //espeak_VOICE *voice_spec = espeak_GetCurrentVoice(); //voice_spec->gender=2; // 0=none 1=male, 2=female, //voice_spec->age = age; //espeak_SetVoiceByProperties(voice_spec); //espeak_SetSynthCallback(AndroidEspeakDirectSpeechCallback); espeak_SetSynthCallback(AndroidEspeakSynthToFileCallback); unsigned int unique_identifier; espeak_ERROR err = espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, &unique_identifier, NULL); err = espeak_Synchronize(); /* strcpy(voicename, GetLanguageVoiceName("EN")); espeak_SetVoiceByName(voicename); strcpy(word, "Geany was fragged by GSG9 Googlebot"); strcpy(word, "Googlebot"); espeak_Synth( (char*) word, strlen(word)+1, 0, POS_CHARACTER, 0, espeakCHARS_AUTO, NULL, NULL); espeak_Synchronize(); */ // espeak_Cancel(); espeak_Terminate(); printf("Espeak terminated\n"); system("pause"); return EXIT_SUCCESS; }

    Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >