Search Results

Search found 6172 results on 247 pages for 'usb headset'.

Page 171/247 | < Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >

• Configure audio on HP ENVY 4 ultrabook

  - by phodu_insaan

  I want to configure audio for ubuntu 12.04 on my laptop. Currently the audio just does not play. If i try and plug in headphones then somewhere midway to being fully plugged in the audio plays on the headphones, I plug in further and the sound disappears. How do I get this to work? lspci | grep audio Audio device: Intel Corporation Panther Point High Definition Audio Controller My laptop is one the beats edition HP laptops, and the driver for win7 was an IDT HD audio driver. --EDIT-- The output for cat /proc/asound/card0/codec* | grep Codec is Codec: IDT 92HD91BXX Codec: Intel PantherPoint HDMI I need to get both the IDT card to work and the HDMI card to work with my TV. --EDIT-- --EDIT 2-- I have added blacklist snd-usb-audio to the end of the file /etc/modprobe.d/alsa-base.conf Now the sound plays from my laptop speakers only when I plug in a headphones/external speaker. Otherwise no sound. :( Please help getting everything working as it should. --EDIT 2-- Thanks

  Read the article

• ".ts " files not recognised

  - by Keith Gardner

  I have some .ts files (programs recorded from my Sharp TV on USB stick) that I want to store/play on my PC. However, although they are listed on the stick when its plugged in the PC nothing will recognize the files. I have tried VLC (the "slider" moves but there's no sound or video) and changed the extension to MPEG, MP2, etc. but no joy. I have tried converting the files with file converters and demuxers but none of these recognize the files. Are the files corrupted (they play on the TV) or do Sharp have a unique file structure? Any help would be greatly appreciated.

  Read the article

• No boot loader found - dual booting Windows 8 with Ubuntu 14.04

  - by Sriram

  I have been trying in vain to dual boot my computer with Windows 8 Pro (pre-installed) and Ubuntu 14.04 64-bit. I have been able to successfully install Ubuntu 14.04, but the option to start Ubuntu does not appear on startup. This is after having taken all steps as mentioned in Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported). I even tried the boot repair option and ended up with this error log. My questions are: How do I solve for No boot loaders found in /dev/...? Are there any other recommendations that will help me solve this? Other points that may be important: Booting into Ubuntu from a live USB shows all Ubuntu partitions on the hard drive.

  Read the article

• How to retrieve data from a corrupted volume

  - by explorex

  Hi, My Ubuntu 10.10 just crashed, probably due to hardware error (and in the end I was getting errors like Unknown filesystem ..... grub> .., and it went to the GRUB console before I could take any other action). I reinstalled the same version from a USB stick. I had Ubuntu installed with the ext4 file system and I also have the same filesystem in the same hard disk on a different drive. When I try to access my previous filesystem, I get errors: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda6, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so I had some important files in the previous volume ; I don't know how to retrieve them. And what are the chances that I would get the same outcome (hardware error)? Please help me!

  Read the article

• Install package with dependencies offline

  - by ArtemStorozhuk

  Right now I have 2 computers: Has connection to the internet and has installed package A. Doesn't have connection to the WEB. On this PC I need to install package A. I decided to download all needed packages using first PC and transfer them to the second PC via USB. I have searched how to get all needed packages for some deb installation and here's what I've found. But when I run: apt-get --print-uris --yes install A | grep ^\' | cut -d\' -f2 > downloads.list on first PC I got empty file because this package is already installed there (and I don't want to uninstall it). Also package A is very complicated and depends on package B which depends on package C and package C is not installed on the second PC. So how can I download all needed packages? Or is there any other way of installing it? Thanks for the help.

  Read the article

• Cisco Linksys AE2500 wireless adapter not working

  - by makuto

  I have a Cisco AE2500 I've used with my laptop to get internet. I had to install the drivers by following this forum: http://ubuntuforums.org/showthread.php?t=1805830 But now the blue light on the adapter doesn't turn on at all, but ndiswrapper reports it is connected. I have no connection to the internet on my laptop, and the adapter doesn't show it's blue light on any of the USB ports of my computer or on the 4 port hub I have. Is there some way I can reset something so that the blue light will show again? I'm using Ubuntu 11.10 on a Dell Latitude D505 laptop. EDIT: I deleted and reinstalled the same exact driver and everything worked again.

  Read the article

• packhard bell dot s netbook ubuntu 12.10

  - by Kermit

  sorry im absolutly linux beginner.... i bought a packhard bell netbook dots with Limpus.did not get along with limpus so wanted to install ubuntu. netbook: 2 GB RAM intel Atom N2600, intel graphics Media Accelerator 3600 I over installled ubuntu 12.10 (desktop version) like in the instruction (isofile over USB). Installation went fine. No problems. when starting after installation alot of text is coming.....starting xyz....with alot of okays at the end of line but nothing happends: ends with #Starting CPU interrups balancing daemon, stopping anachronics cron and blinking cursor... was reading in this forum, tried to do some things like #recoverymode# and nomodeset... but did not work or where do i get this graphic drivers from. Packard bell just offers windows drivers.and how do i install them? maybe its a completely diffrent cause for this? Thanks alot

  Read the article

• Unable to Mount Seagate Array from Iomega

  - by GE Cardiff

  I am new to Ubuntu so please be kind! My (Windows based) Iomega Storcentre ix2-200 stopped working, with all my business data upon it. Iomega helpfully told me that I should get Fedora, remove the Seagate hard drives and recover the information by connecting via a USB / SATA cable. First I could not get Fedora to load (due to it needing an Internet connection before loading complete) so I got Ubuntu - much easier to load. Software seems fine, and in "Computer" there is an "Array" icon - this is clearly the Seagate hard drive I have connected. It will not, however, Mount. "Unable to mount location, can't mount file". Any help gratefully received! As a slight aside, I can't seem to find "terminal" in this version of Ubuntu?

  Read the article

• How To Boot Your Android Phone or Tablet Into Safe Mode

  - by Chris Hoffman

  On your Windows PC, you can boot into safe mode to load Windows without any third-party software. You can do the same on Android with Android’s safe mode. In safe mode, Android won’t load any third-party applications. This allows you to troubleshoot your device – if you’re experiencing crashes, freezes, or battery life issues, you can boot into safe mode and see if the issues still happen there. From safe mode, you can uninstall misbehaving third-party apps. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Error while trying to dual boot Ubuntu alongside Windows 8

  - by Brian

  I recently purchased a new Toshiba Ultrabook that comes pre-installed with Windows 8. I'm trying to dual boot 12.10 with it and I have run into a problem with the installer. When I get to the page to pick the partitions I get this: No drives are listed and the only thing in that device drop down is /dev/sda. If I click Install Now or +/-/change I get an "Ubuntu has stopped working" error message. I'm trying to install off a 12.10 64-bit USB drive in UEFI mode, and I have tried it with secure boot both enabled and disabled with the same results. The hard drive set up is as follows: 500 GB main drive windows recovery (primary) EFI boot section (primary) Windows' partion (280 GB I believe) (primary) unallocated space I created for Ubuntu partition (200ish GB) another Windows recovery partition (primary) 12 GB solid state drive all unallocated space Could it be a problem with the number of primary partitions? I think I read somewhere about a max of 4.

  Read the article

• Bluetooth mouse lag on high cpu load ubuntu 11.04 12.10

  - by sirkubax

  I have just migrate to Ubuntu 12.10 and I have noticed that I have huge problem with my bluetooth mouse left click button on a high load (wired, but scroll and right button are not affected) (I think powersave cpu mode affect that more than cpu load) It just not "trigger the interrupt". Mouse is laggy, click are not reggisterd. I can not work like that. At the same time, my touchpad and usb mouse works great. How to check that - limit cpu frequency (I use powersave and ondemend mode) I now wonder, what should I log, check, measure, to capture enough data to fill bug report. Any suggestions? greetings sirkubax

  Read the article

• Install/upgrade ubuntu from another system

  - by Samarth Agarwal

  I have a new Laptop with latest Ubuntu preinstalled on it, its 12.04. I have another laptop with Ubuntu 10.04 on it. What I lack is a fast internet connection. I want to upgrade my Ubuntu 10 laptop to a ubuntu 12 version. How is this possible without using internet connection? Can I move/copy the installation from the new laptop to the older one? Is there a way so that the newer laptop can upgrade the older one using a usb disk or dvd/cd?

  Read the article

• Grub Rescue Error: Unknown Filesystem

  - by James

  I was trying to dual boot Windows with Linux (linux installed first). I read that it was easier to do so if windows was installed first. So I tried to install windows, by creating a partition for it. There wasn't enough room on the drive so I tried changing the filesystem of my existing partition to support windows. Now whenever I try to start my computer I get the grub rescue screen. I've tried booting from CD and USB with ubuntu and also with windows, but nothing happens. I ran ls in grub rescue and got hd0, (hd0,msdos5), cd (with an install disc inserted), fd0, and fd1. However if I run ls on any of these I receive the error: unknown filesystem. Can anyone help me out?

  Read the article

• Installing Broadcom Drivers on Ubuntu 12.04

  - by HDInfinity

  I downloaded Ubuntu 12.04 so that I could Dual boot between Ubuntu and Vista. I am currently using a Broadcom 802.11.n Network Adapter for internet, I DON'T have access to an Ethernet connection. Is there a way for me to install the Broadcom drivers for Ubuntu while running Vista, then just install the drivers on Ubuntu from my Vista files. Or put the Drivers on a USB and install from there. There is no way for me to get an internet connection on Ubuntu without the Broadcam drivers.

  Read the article

• Monitor displays "No VGA signal" "Check DVI cable" after installing motherboard drivers

  - by user1604220

  I bought computer with all of the needed parts, got everything sorted out, installed windows 7 but my CD-ROM doesn't fit my motherboard. So I had to download the driver manually and install it using USB disc. My motherboard: ECS elitegroup H61H2-M2, I downloaded it's drivers, installed the BIOS map or something, and then the computer forced a reboot after it was complete, after the reboot my monitor just stopped working and displayed No VGA signal, No DVI cable I think I've just installed the wrong driver, well but how can I sort it out? This is the driver I installed. On the book, it tells me to install the drivers, without the driver it won't see the Internet connection cable. I'm 100% sure there is nothing wrong with the monitor or it's cables. it stopped working exactly after the reboot after the installation.

  Read the article

• Can't install Ubuntu on a HP DV6 Laptop

  - by EApubs

  I just bought a HP DV6 6011tx (link) Laptop. I formated the disk through Windows and prepared for installing Ubuntu. But when I inserted the live CD, it showed the Ubuntu start screen and then everything went black. There was no cursor, everything just stayed black like the screen was switched off (but the system is running). When I tried to install from the USB, it said Live media is not found. Sometimes it also gave me a black screen like the CD. Does anyone have any idea how to fix this? Thanks!

  Read the article

• How to change the terminal to SCO compliant

  - by kaushik

  I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

  Read the article

• Where is Nautilus icon file located and how is it chosen?

  - by Steve

  When I plug my Garmin Nuvi 265 GPS device into my computer via a USB cable, it mounts as a drive with a blue triangle icon instead of the default gray hard drive icon. HOW does Nautilus know how to do this? After much laborious searching, I found that the icon info is stored in ~/.gconf/apps/nautilus/desktop-metadata/GARMIN@46@volume/gconf.xml -- but only when a custom icon is selected. So Where is this blue icon file? Why does Nautilus use it instead of the plain drive icon? Is there a way to have give each of my drives a custom icon -- so that when I stick in my various flash drives, they have a distinctive icon (i.e. a 'favicon.ico' file on root or such?) Using Gnome 2.30.2 on Ubuntu 10.04.

  Read the article

• Windows 8 and Ubuntu 12.10 dual boot

  - by Marty

  I have been having a tough time getting a new computer (Lenovo h430) that came with windows 8 to dual boot with ubuntu linux. I can get ubuntu to install from a usb drive and can use the live system (ubuntu 12.10) but dual booting has not worked. I have cruised the internet and tried a number of solutions such as easybcd 2.2 and boot repair under linux. I have also gone into the setup screen to try and fix it but the lenovo acromyms in the setup are not illuminating for me. Does anyone know of a clear set of instructions for installing ubuntu on a machine delivered with windows 8 ?

  Read the article

• manage 2 wireless device

  - by yi.tang.uni

  I erased Windows 7 and installed Ubuntu 12.04 on my Dell Latitude E4200. I an very happy with my choice but with little pity. I cannot use the wireless service in my university as the build-in device works unstable. I bought a USB wireless device, which solve the problem. However, the build-in device keep to sent me message about unable to connect, which waste laptop's cup & battery. The phsical bottom to turn off wireless affect both devices. So the question is: "How can I manually shut down wireless device?" There is another interest comes to my mind: "Does 2 wireless improve the overall internet usage if I run a high-internet-consuming program like BT ?" Thank for your time and energy.

  Read the article

• Network setup not working. Can't connect to the Internet in Ubuntu

  - by Clint Eastwood

  I want to know how to set-up network in 12.04 using automatic settings (DHCP). I installed Ubuntu, but I can't seen to see the network connection. What can I do? My notebook has no wireless only cable. The cable will not fit in. How can I plug it in? Do I need a special Cable? There is no router can I fix this myself, or should I call a technician? Also can I use USB to connect to the network/Internet? please can you help Thank you jamel

  Read the article

• kde keyboard problems Ubuntu 12.04

  - by chazdg

  I have Unity & Gnome 3.4 installed successfully. All Dell keyboard keys work perfectly with both. I installed kde - full via terminal. Everything is working great except for the hotkeys. No calculator, no Mute, nothing. I check which keyboard is selected and choose Dell Multimedia USB Keyboard. No luck. How do I get my Dell keyboard to work with kde - the same keyboard that works with Unity & Gnome 3.4. Thanks in advance for any advice.

  Read the article

• Make a Geeky Lego Key Holder for Your Home [Quick DIY Project]

  - by Asian Angel

  LEGOs are terrific fun to work with whether you are in a playful mood or working on a personal geeky project. With that in mind the Mini-eco blog has an quick and easy tutorial for making an awesome LEGO key holder for your home or office. The best part about this project is the amount of personalization in colors and/or themes (i.e. Star Wars, Indiana Jones, etc.) that you can bring to it. To get started just visit the blog post linked below… DIY Lego Key Holder [via BoingBoing] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• mic on cam don't work

  - by ezz9

  the cam works. I pull up PulseAudio I can see it pick me up for 1sec then stops. don't work on Skype I've tried every USB port same thing it worked on 10.04 fine. but now I'm on 12.04 and it don't work. it is a logitech B500 desktop:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 046d:0807 Logitech, Inc. Webcam B500 Bus 003 Device 002: ID 03f0:6104 Hewlett-Packard DeskJet 5650c Bus 005 Device 002: ID 046d:c51b Logitech, Inc. V220 Cordless Optical Mouse for Notebooks I have changed some setting in flash Player Settings Manager, I don't think it would affect it after all the cam is still working it's the microphone that freezes up, but thought I would tell you this, info is good.

  Read the article

• Using Linux as guest on vmware and sharing connection with windows vista

  - by mike

  I been trying for weeks with vmwware player, now d/l vmwware work station 7, Have a laptop with one built in modem and a usb modem I bought, It works great switching it over from host to use in ubuntu to connect to the net, now when I use that modem from the host to connect online I have no trouble getting ubuntu to share the internet connection, But tried with NAT bridge host and all to get it to work from ubuntu to share the internet connection to windows vista, the host, I know it should work if it works the other way around, I tried setting up my wlan0 eht0 and eth1 to the correct IP can get both systems to notice each other by name and ip, but cant get them to share the connection from guest to host, I've tried iptables and all as well, Can someone please help me out with this? I am sure It is something something I'm over looking, Thanks in advance

  Read the article

< Previous Page | 167 168 169 170 171 172 173 174 175 176 177 178  | Next Page >