Search Results

Search found 11208 results on 449 pages for '200 success'.

Page 172/449 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Display maintenance site to requesters based on their IP address

  - by user64294

  Hi all. I would like to set a special configuration in our apache web server. I would like to display sites to the users according to their IP addresses. We plan to upgrade our web sites. During the upgrade we'll put a maintenance site: so all the users which will connect to our web sites will get this site. There are 200 websites affected by the upgrade, so I don't want to change apache settings for each one. In order to test the upgrade i need to set apache to let only my IP address to access to asked site. If my IP address is a.b.c.d and if i ask for test.com i want to see it. but all other users, having a different IP address, should get the maintenane site even if they look for test.com. Our webserver is hosted out of the office (ovh.com france). The testers are the developers at our office and me. We can take some sites and enable them for test in which we implement IP restrictions in each website: the idea is on these websites, if the visitor's IP address is different from our office IP address we redirect this visitor to our maintenance website else we display the website. Is there a way to do this? Thank you.

  Read the article

• White Screen, No Errors.

  - by GruffTech

  So.. Interesting problem for you guys, As I'm completely lost as to what to do, or where to take the next step. Server & Application Environment. CentOS release 5.3 (Final) Apache 2.2.3-22 EnableSendfile off EnableMMAP off ErrorLog logs/error_log LogLevel debug PHP-5.2.6-2 error_reporting = E_ALL display_errors = on log_errors = on max_execution_time=300 max_input_time=60 memory_limit=512mb Kohana 2.3 PHP Environment. HAProxy 1.3.15.6-2 MemCacheD 1.2.6-1 Our application is split between 3 web servers, mounting a NFS Storage server, and sticky load balancing between the 3 web servers. The application seemingly runs great, but every so often, instead of loading, the application just shows a pure white page. Not a 404 Error, or a 500 Server Error, a clean white page. And it returns instantly, so its not a execution time error. Nothing in the Error log, or Server-Error Log, Proxy log shows standard proxied connection, Just the standard 200-Status in Access log, with 256 bytes transferred. To me, this leads to tell me that the application itself is having a problem. A rare, unexplainable, seemingly random, problem that causes what we've now called the "White Screen of Death." Our developers all say that since there is nothing going to our error logs, that it must be a server problem. But I say the same thing, There's nothing going to ANY of our logs (relevent to this anyway), and we're not having httpd children crash from what i can tell. Any ideas on how i can increase my logs, or somehow prove that its not a bug in PHP, Apache, CentOS, ect? Or if it is somehow a bug, identify it?

  Read the article

• AWS elastic load balancer basic issues

  - by Jones

  I have an array of EC2 t1.micro instances behind a load balancer and each node can manage ~100 concurrent users before it starts to get wonky. i would THINK if i have 2 such instances it would allow my network to manage 200 concurrent users... apparently not. When i really slam the server (blitz.io) with a full 275 concurrents, it behaves the same as if there is just one node. it goes from 400ms response time to 1.6 seconds (which for a single t1.micro is expected, but not 6). So the question is, am i simply not doing something right or is ELB effectively worthless? Anyone have some wisdom on this? AB logs: Loadbalancer (3x m1.medium) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 11.668 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 4285.10 [#/sec] (mean) Time per request: 23.337 [ms] (mean) Time per request: 0.233 [ms] (mean, across all concurrent requests) Transfer rate: 1661.35 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 2 4.3 2 63 Processing: 2 21 15.1 19 302 Waiting: 2 21 15.0 19 261 Total: 3 23 15.7 21 304 Single instance (1x m1.medium direct connection) Document Path: /ping/index.html Document Length: 185 bytes Concurrency Level: 100 Time taken for tests: 9.597 seconds Complete requests: 50000 Failed requests: 0 Write errors: 0 Non-2xx responses: 50001 Total transferred: 19850397 bytes HTML transferred: 9250185 bytes Requests per second: 5210.19 [#/sec] (mean) Time per request: 19.193 [ms] (mean) Time per request: 0.192 [ms] (mean, across all concurrent requests) Transfer rate: 2020.01 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 1 9 128.9 3 3010 Processing: 1 10 8.7 9 141 Waiting: 1 9 8.7 8 140 Total: 2 19 129.0 12 3020

  Read the article

• ffmpeg - h264 to xvid creates large file

  - by fatnic

  I'm trying to use ffmpeg to convert a h264/aac video file to an xvid/mp3 file so I can play it in my ultra-cheap media player. At the moment the converted video file is TWICE the size of the original mp4. Is there any way to get a smaller file size without loosing too much quality? Even a drop to -qmin 1 is pretty awful! The command i'm using is ffmpeg -i input.mp4 -vcodec libxvid -sameq -acodec libmp3lame -ab 128k -ac 2 output.avi And the ffmpeg output is Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'input.mp4' Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 Duration: 01:34:27.69, start: 0.000000, bitrate: 1520 kb/s Stream #0.0(und): Video: h264, yuv420p, 720x304 [PAR 1:1 DAR 45:19], 1387 kb/s, 25 fps, 25 tbr, 25k tbn, 50 tbc Stream #0.1(und): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Output #0, avi, to 'output.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0(und): Video: mpeg4, yuv420p, 720x304 [PAR 1:1 DAR 45:19], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1(und): Audio: libmp3lame, 48000 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1

  Read the article

• Unable to login through varnish cache

  - by ArunS

  I am setting up Active Collab Site in my new server. The setup is like below Internet --- varnish ---- apache But i am not able to login to the site through varnish cache.. But i can login to site through apache. Here is my VCL file backend default { .host = "localhost"; .port = "8080"; } acl purge { "localhost"; } sub vcl_recv { if (req.request == "PURGE") { if (!client.ip ~ purge) { error 405 "Not allowed."; } return(lookup); } if (req.url ~ "^/$") { unset req.http.cookie; } } sub vcl_hit { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } sub vcl_miss { if (req.request == "PURGE") { error 404 "Not in cache."; } if (!(req.url ~ "wp-(login|admin)")) { unset req.http.cookie; } if (req.url ~ "^/[^?]+.(jpeg|jpg|png|gif|ico|js|css|txt|gz|zip|lzma|bz2|tgz|tbz|html|htm)(\?.|)$") { unset req.http.cookie; set req.url = regsub(req.url, "\?.$", ""); } if (req.url ~ "^/$") { unset req.http.cookie; } } sub vcl_fetch { if (req.url ~ "^/$") { unset beresp.http.set-cookie; } if (!(req.url ~ "wp-(login|admin)")) { unset beresp.http.set-cookie; }} When i try to login through varnish i was redirect back to login page. If i enter wrong password, then it will ask for enter correct password.

  Read the article

• Archive Manager, SQL 2005 and MaxTokenSize high CPU

  - by Tim Alexander

  So, I posted this question a few days ago: Impact of increasing the MaxTokenSize for Kerberos Tickets Since then the thought was to test our settings on two member servers, one with IIS and one without. I setup two GPOs to configure the MaxTokenSize reg setting to 48000 and MaxFieldLength/MaxRequestBytes to 64200 (based on MS KB2020943, these are set at 4/3 * T + 200). The member server seemed to work ok (a devalued tape backup server). The IIS server however has had some strange repercussions. The IIS Sserver host Quest Software Archive Manager (AM) 4.5 that communicates with SQL Server 2005 Enterprise on Server 2003 R2. After the changes all looked good until the SQL Server hit 100% CPU. I have removed the GPOS, removed the reg values and even replaced them with defaults (12000 for token size and can't remember the other one but was in a blog post about the issue in my other post). No change. Bouncing the IIS Server stops the high CPU and a colleague has looked at the SQL server and it is definitely the AM connection taking up the time/work on the SQL server. I haven't changed the reg values on the SQL server or the DCs but am reluctant to do so without understanding why this has happened. I am guessing its to do with the overriding auth and group issue we have but I am not seeing Kerberos errors in either event log. Has anyone seen something similar or does anyone have some tips? Was definitely blindsided by the Kerberos issue and am swimming against the tide to keep things functioning.

  Read the article

• Help about pure-ftp

  - by hai

  I setup pure-ftp on freebsd behind firewall. On pure-ftp setuped passsi mode ftp(rangle port 50400-50600) and firewall open port from 50400-50600 (include mode IN and out). But i try use ftp client connect but not connect. Nofinication error status: Connecting to 210.245.89.95:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 13:20. Server port: 21. Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER bk Response: 331 User bk OK. Password required Command: PASS Response: 230 OK. Current directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTA Response: PASV Response: EPSV Response: SPSV Response: ESTP Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (210,245,88,98,138,1) Command: MLSD Error: Connection timed out Error: Failed to retrieve directory listing Status: Connecting to 210.245.88.98:21... Status: Connection established, waiting for welcome message... Help me.

  Read the article

• mysql.sock problem on Mac OS X, all Zend products

  - by Michael Stelly

  Hi folks. I posted this on the Zend forum, but I'm hoping I can get a speedier reply here. I've tried every solution provided on this forum with no luck. When I restart mysql, everything appears ok. sudo /usr/local/zend/bin/zendctl.sh restart Password: /usr/local/zend/bin/apachectl stop [OK] /usr/local/zend/bin/apachectl start [OK] Stopping Zend Server GUI [Lighttpd] [OK] spawn-fcgi: child spawned successfully: PID: 7943 Starting Zend Server GUI [Lighttpd] [OK] Stopping Java bridge [OK] Starting Java bridge [OK] Shutting down MySQL . SUCCESS! Starting MySQL . SUCCESS! Pinging locahost is also OK and resolve dns to IP. ping localhost PING localhost (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.048 ms 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.064 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.066 ms 64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.076 ms 64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.064 ms But when I attempt to access the local url for my app, I get the dreaded: Message: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2). This is a show-stopper for me. I appreciate any assistance. Thank you.

  Read the article

• HP Proliant DL380 G4 - Can this server still perform in 2011?

  - by BSchriver

  Can the HP Proliant DL380 G4 series server still perform at high a quality in the 2011 IT world? This may sound like a weird question but we are a very small company whose primary business is NOT IT related. So my IT dollars have to stretch a long way. I am in need of a good web and database server. The load and demand for a while will be fairly low so I am not looking nor do I have the money to buy a brand new HP Dl380 G7 series box for $6K. While searching around today I found a company in ATL that buys servers off business leases and then stripes them down to parts. They clean, check and test each part and then custom "rebuild" the server based on whatever specs you request. The interesting thing is they also provide a 3-year warranty on all their servers they sell. I am contemplating buying two of the following: HP Proliant DL380 G4 Dual (2) Intel Xeon 3.6 GHz 800Mhz 1MB Cache processors 8GB PC3200R ECC Memory 6 x 73GB U320 15K rpm SCSI drives Smart Array 6i Card Dual Power Supplies Plus the usual cdrom, dual nic, etc... All this for $750 each or $1500 for two pretty nicely equipped servers. The price then jumps up on the next model up which is the G5 series. It goes from $750 to like $2000 for a comparable server. I just do not have $4000 to buy two servers right now. So back to my original question, if I load Windows 2008 R2 Server and IIS 7 on one of the machines and Windows 2008 R2 server and MS SQL 2008 R2 Server on another machine, what kind of performance might I expect to see from these machines? The facts is this series is now 3 versions behind the G7's and this series of server was built when Windows 200 Server was the dominant OS and Windows 2003 Server was just coming out. If you are running Windows 2008 R2 Server on a G4 with similar or less specs I would love to hear what your performance is like.

  Read the article

• Identifying Service Error in Fedora 16

  - by Cerin

  How do you find the cause of a failed service start in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

  Read the article

• What performance degradation to expect with Nginx over raw Gunicorn+Gevent?

  - by bouke

  I'm trying to get a very high performing webserver setup for handling long-polling, websockets etc. I have a VM running (Rackspace) with 1GB RAM / 4 cores. I've setup a very simple gunicorn 'hello world' application with (async) gevent workers. In front of gunicorn, I put Nginx with a simple proxy to Gunicorn. Using ab, Gunicorn spits out 7700 requests/sec, where Nginx only does a 5000 request/sec. Is such a performance degradation expected? Hello world: #!/usr/bin/env python def application(environ, start_response): start_response("200 OK", [("Content-type", "text/plain")]) return [ "Hello World!" ] Gunicorn: gunicorn -w8 -k gevent --keep-alive 60 application:application Nginx (stripped): user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; upstream app_server { server 127.0.0.1:8000 fail_timeout=0; } server { listen 8080 default; keepalive_timeout 5; root /home/app/app/static; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } } Benchmark: (results: nginx TCP, nginx UNIX, gunicorn) ab -c 32 -n 12000 -k http://localhost:[8000|8080]/ Running gunicorn over a unix socket gives somewhat higher throughput (5500 r/s), but it still does't match raw gunicorn's performance.

  Read the article

• USB Harddisk not working on dual boot windows7/8

  - by Jesper

  Yesterday I installed Windows 8 on a machine that already had Windows 7. They are on dual boot and both systems work fine. The problem is that inserting a USB hard disk in either system does nothing. If I connect a USB mouse or mobile phone, they work fine, so the USB plugs are active/working and the USB hard drives that I am trying to connect work on my other laptop just fine. I have tried to uninstall all USB-related items in Device Manager and let them reinstall upon restart, but that didn't help. The USB drive does not show up in disk management either. The strange thing is that it is exactly the same situation on both windows. USB mice etc. work just fine and USB hard drives do not. Any ideas on solving this problem would be great. ...Don't know if it is important, but this is a Toshiba Tecra R950 Laptop. EDIT: I have found out that my other USB HD (Western Digital) works on this laptop, but for my StoreJet Transcend and Adata "something" does not work. All three work on another Windows 7 laptop. Sizewise the WD is in the middle at 400 GB. The StoreJet is 640 GB and the Adata is 200 GB.

  Read the article

• Mangling traffic from a Mikrotik Router

  - by TiernanO

  I have a MikroTik powered Router in the house with a couple of internet connections (2 200/10Mb Cable modems and a 100/20Mb VDSL Line). I am using Mangle rules to set routing marks and NAT rules to do some load balancing, and everything seems to be going grand... But it only works for traffic from outside the router... Let me explain: I have 4 GigE ports on the machine, WAN1,2 and 3, and a LAN port named LAN1. All traffic from LAN1 is getting mangled (as it should be) but traffic from the load router itself (proxy traffic, IPv6 tunnels, VPN connections) are not being mangled. They get the first route to 0.0.0.0/0, which in my case is WAN2, and stick with it. So, how do I get traffic from the local router to be mangled? Originally it was proxy traffic that caused the problem, but now with IPv6 and VPN, they are more important to be mangled... last time i enabled IPv6 traffic, all traffic only went though WAN2, and the rest where unused... Any ideas?

  Read the article

• IE6 does not follow 302 redirect - displays 404 instead

  - by Dexter

  One of our clients has reported that they are experiencing 404 (file not found) errors when attempting to navigate a website that we support. The behaviour only appears to affect her - other users on the same machine can navigate the website fine, but the problem follows her from one PC to another. I've had a good look through the IIS server logs and have identified the requests in question. The normal request pattern is as follows: POST /page.aspx - 80 - ... 401 1 0 POST /page.aspx - 80 DOMAIN/user ... 302 0 0 GET /anotherPage.aspx Request=833f80a5-f34c-4b0e-addb-d73e1ee1663a 80 - ... 401 1 0 GET /anotherPage.aspx Request=833f80a5-f34c-4b0e-addb-d73e1ee1663a 80 DOMAIN/user ... 200 0 However, requests for the affected user do not include a request for the redirected page, nor an entry for the 404, i.e.: POST /page.aspx - 80 - ... 401 1 0 POST /page.aspx - 80 DOMAIN/user ... 302 0 0 ... other unrelated requests Can anyone suggest what might trigger this behaviour, and how I might investigate the cause or prevent it from occuring? I read here that the Allow META refresh option in IE6 might trigger this behaviour, but I have not been able to replicate the behaviour by modifying this setting only.

  Read the article

• Network access lags for Win7 when server network utilization is high

  - by Jeff Miles

  We have a Dell PE2950 file server running Windows 2008, hosting a DFS namespace of ~1.2 TB. This server has two Broadcom 1Gbps NICs teamed together. When there is high traffic going to the server across the network (greater than 200 Mbps), any Windows 7 client accessing a DFS share at the time experiences severe performance problems. For example: Computer A has an AutoCAD drawing opened directly from the DFS share. Performance is normal, not causing any issues. Computer B begins a file transfer, putting a 11GB file onto a different DFS namespace, on the same server Computer A immediately notices lag while using AutoCAD. The cursor momentarily freezes within AutoCAD every 10 seconds or so, and any browsing of the DFS share is extremely slow. Computer B completes file transfer, and performance resumes to normal for Computer A. This is only affecting Windows 7 clients, using a variety of hardware (desktop + laptop). All of our Windows XP clients see no performance impact during the file transfer. Things I have tried with no change: Had Computer A work from an entirely different RAID array from the file transfer destination Updated NIC drivers on clients and server Enabled TCP offload and receive side scaling on the server NIC (previously disabled when the issue began) Antivirus disabled during file transfer I am currently having a user test applications other than AutoCAD when the file transfer occurs, and will update the question with that result. Does anyone have any recommendations for resolution or additional troubleshooting steps?

  Read the article

• ffmpeg cutting video duration

  - by Steve Spence

  When using ffmpeg on linux, my 4.3GB 2.21 second video is being chopped down to 1.56 duration. I'm trying to reduce file size, but not lose frames. steve@steve-OptiPlex-170L:~/Desktop$ ffmpeg -i microbe.avi microbe.mp4 ffmpeg version 0.8.3-4:0.8.3-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Jun 12 2012 16:37:58 with gcc 4.6.3 * THIS PROGRAM IS DEPRECATED * This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. Input #0, avi, from 'microbe.avi': Duration: 00:02:21.80, start: 0.000000, bitrate: 242311 kb/s Stream #0.0: Video: rawvideo, bgr24, 1280x960, 10 tbr, 10 tbn, 10 tbc Incompatible pixel format 'bgr24' for codec 'mpeg4', auto-selecting format 'yuv420p' [buffer @ 0x9f861e0] w:1280 h:960 pixfmt:bgr24 [avsink @ 0x9f86440] auto-inserting filter 'auto-inserted scaler 0' between the filter 'src' and the filter 'out' [scale @ 0x9f7d800] w:1280 h:960 fmt:bgr24 - w:1280 h:960 fmt:yuv420p flags:0x4 Output #0, mp4, to 'microbe.mp4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: mpeg4, yuv420p, 1280x960, q=2-31, 200 kb/s, 10 tbn, 10 tbc Stream mapping: Stream #0.0 - #0.0 Press ctrl-c to stop encoding frame= 1164 fps= 6 q=31.0 Lsize= 3775kB time=116.40 bitrate= 265.7kbits/s video:3765kB audio:0kB global headers:0kB muxing overhead 0.272870% steve@steve-OptiPlex-170L:~/Desktop$

  Read the article

• Linux/hostapd: AP can ping clients, clients can access internet, can't access www@wlan1 with more than 5-6 packets at once

  - by mhambra

  Please edit the title, can't make it sound better. -- OP. Hi all, I have a Wifi USB dongle in a PC, that serves as an AP for laptop. wlan1: 192.168.2.1, netmask 255.255.255.0, routed: route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 ping 192.168.2.2 (laptop): ping was ok for lot of packets. Now, I try to access 192.168.2.1:80/myindex.html (apache) from laptop, and can see that own 1kb test page. But, trying to access 192.168.2.1:80/my.jpg, I see the following: GET /my.jpg HTTP/1.1 200 OK <jpg header, about a kilobyte> <TCP packet retransmisson> <TCP packet retransmisson> <end of stream> It seems to be a hostapd's problem (networked stuff worked fine with Ad-Hoc), but it may be also forwarding/routing problem too. What to google for? Even more strange, SSH to that host works fine.

  Read the article

• TOR Proxy / Vidalia "New Identity" button not working

  - by Yisman

  I need to hide my ip from time to time. In Vidalia, I click on "New Identity". Ihen I check http://myip.ozymo.com/ to see if my IP address has changed. But, no, it hasn't. Why is that? And how can this be fixed? I tried waiting till the button gets re-enabled to make sure that its done processing the command, but still the IP address is the same. In Fiddler each request is tracked, so it's not a cached response. It's re-requested, but simply does not change. Fiddler though does show one thing interesting. Here is the raw response of many of the requests: HTTP/1.1 200 OK Content-Length: 13 Date: Mon, 23 May 2011 12:02:57 GMT Server: Apache X-Powered-By: PHP/5.2.14 Content-Type: text/html; charset=UTF-8 Age: 1 Connection: keep-alive **Warning: 110 localhost:8118 Object is stale** 26.32.120.106 What is this warning? And is this the cause?

  Read the article

• Mac Finder: WD My Passport won't mount

  - by Matt

  I really need your help. I have a WD My Passport 650GB (with Firewire and USB). I'm using it for almost a year now and it always worked fine. While underway I simply plug it in via Firewire - at home I connect it to my Airport Extreme to have it available as a network storage. Today I connected the hd to my macbookpro (via firewire) and NOTHING. The hd is starting (clearly making a sound and the power-indicator is flashing) but it won't appear in Finder. I also tried it with USB - no sign. I ran Disk Utility and tried to repair the disk. At first try I got a red error line saying that something is wrong with the "headers". However the repair completed with a success message saying that everything is ok. I also verified the hd. Also with a success message. I did that a few times again and unplugged it in between. Never got the error with the headers again - it's always completing and saying everything is ok. However I can't mount the drive. That is what Disk Utility is showing. Any ideas on that? I really need the files on that hd. thank you in advance!

  Read the article

• CentOS 6.5 x64 + Ajendi +nginx + php-fpm + mysql setup unable to load the PHP page

  - by Francis

  I'm using Ajendi to setup a PHP web server, I can load the PHP info page, when I try to load the PHP copy from other server, I get a blank page with this log appear on access log, I have no clue what was wrong and troubleshoot further, please advice. x.x.x.x - - [28/May/2014:10:08:37 -0400] "GET /index.php HTTP/1.1" 200 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:29.0) Gecko/20100101 Firefox/29.0" 2.6.32-431.1.2.0.1.el6.x86_64 cat /etc/redhat-release CentOS release 6.5 (Final) The vhost config AUTOMATICALLY GENERATED - DO NO EDIT! server { listen *:80; server_name test.com www.test.com; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; root /www; index index.html index.htm index.php; location ~ \.php$ { alias /www; fastcgi_index index.php; include fcgi.conf; fastcgi_pass unix:/var/run/php-fcgi-php-fcgi-0.sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } }

  Read the article

• nginx doesn't find the directory but apache does

  - by Jack Spairow

  I use apache as the backend server and nginx on the frontend. Apache listens to port 8080 and nginx to port 80. What I do is have the root point to the public folder foreach virtualhost: <VirtualHost *:8080> ServerAdmin webmaster@localhost ServerName site.com ServerAlias site.com *.site.com DocumentRoot /var/www/site.com/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/site.com/public/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost> And here's the nginx config: server { listen 80; access_log /var/log/nginx.access.log; error_log /var/log/nginx.error.log; root /var/www/site.com/public; index index.php index.html; server_name site.com *.site.com; location / { location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $host; proxy_pass http://127.0.0.1:8080; proxy_cache one; proxy_cache_use_stale error timeout invalid_header updating; proxy_cache_key $scheme$host$request_uri; proxy_cache_valid 200 301 302 20m; proxy_cache_valid 404 1m; proxy_cache_valid any 15m; } } location ~ /\.(ht|git) { deny all; } } The problem is Apache resolves the domain just fine (site.com:8080), but nginx shows instead a 502 Bad Gateway (site.com:80). I tried looking at the error_log and access_log but I can't find any hint for why can't nginx work. EDIT: The problem was I wasn't able to include that isolated config for nginx.

  Read the article

• Nginx - Serve blank page on "Bad Gateway" error

  - by TheLittleCheeseburger

  Hello all. I want to use Nginx as a simple reverse proxy, but if the server behind Nginx is down I just was to display a blank page. For some reason this configuration isn't displaying a blank page on error 502 and I can't figure out why. Thanks for your help! user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; use epoll; # multi_accept on; } http { keepalive_timeout 65; proxy_read_timeout 200; upstream tornado { server 127.0.0.1:8001; } server { listen 80; server_name www.something.com; location / { error_page 502 = @blank; proxy_pass http://tornado; } location @blank { index index.html; root /web/blank; } } }

  Read the article

• Adding subnet to a vsphere with single vcenter and esxi host

  - by Ilya Rakhlin

  Let me start of by saying that I do not specialize in networking, I am in the process of adding additional VMs to a testing environment and wanted some recommendations. In this case I am running a single ESXI 5.1 host and a single Vcenter management server. The problem is, I need another range of IP addresses added to the existing setup; hopefully without reconfiguring everything. Currently the esxi host is configured to IP: 192.168.100.200, gateway: 192.168.100.1 and subnet: 255.255.255.0. All of the VMs are running some version of linux with hard coded IP addresses in that range, and using that subnet. The VMs I am about to deploy I want to be on the 192.168.101.X network. Is it possible to add an additional subnet to this existing system that will also communicate with the current subnet? The esxi host has 6 physical NICs but only one connected as it is only a testing system; not sure if that matters. Are there any other ways to accomplish this hopefully without restarting or at least reconfiguring the IP addresses for each VM? Reason: Due to the configuration of the VMs to run the applications that we need I am using a large amount of the current IPs in the potential range (mostly VIPs). I will be setting up a new version of this “environment” while keeping the old one, thus potentially running out of IP addresses.

  Read the article

• Cookieless Domain redirect in WHM/cPANEL

  - by Patrick Lanfranco

  I am currently trying to get my head around in understanding how to set-up a "cookieless" domain using WHM / Cpanel - unfortunately without any success at this moment. I have a Magento store and I would like to use "cookieless domains" for my media, skin (template) and js files. Magento has a nice feature to define URL for those folders. My current setup is as follows: www.mydomain.com <- main store media.mydomain.com <- subdomain to the media folder (mydomain.com/media/) skin.mydomain.com <- subdomain to the media folder (mydomain.com/skin/) js.mydomain.com <- subdomain to the media folder (mydomain.com/js/) I think it's poinless to have them used as "cookieliess domains" since my Magento installation uses .mydomain.com as cookie domain, so what I would like to achieve is to register a new additional domain and have it point via WHM / cPanel to those specific locations. I have tried to change the A and CNAME records although without any success as they were just simply redirecting from one page to another in the browser (newdomain.com - jump to old.com). What kind of records do I have to set to have this working properly? Some advice would be highly appreciated.

  Read the article

• lighttpd: why using port >= 9000 does not work properly

  - by yejinxin

  I had a lighttpd server which works normally. I can access this website from outside(non-localhost) via http://vm.aaa.com:8080. Let's just assume that it's a simple static website, without php or mysql. Now I want to copy this website as a test one(using another port) in the same machine. And I do not want to use virtual host. So I just copy the whole files of original server, including lighttpd's bin/ conf/ htdocs/ lib/ and so on folders. And I made some required change, including changing lighttpd.conf. Now what I'm confused is, if change the port to a number that is less than 9000, it works perfectly. But if the port is changed to a number that is equal or greater than 9000, lighttpd can start, but I can not access the new website from outside, while I do can access the new website from INSIDE(I mean in the same LAN or localhost). The access log from INSIDE is like below: vm.aaa.com:9876 10.46.175.117 - - [08/Oct/2012:13:18:47 +0800] "GET / HTTP/1.1" 200 15 "-" " curl/7.12.1 (x86_64-redhat-linux-gnu) libcurl/7.12.1 OpenSSL/0.9.7a zlib/1.2.1.2 libidn/0.5.6" Command I used to start lighttpd is: bin/lighttpd -f conf/lighttpd.conf -m lib/ -D My lighttpd.conf is like: server.modules = ( "mod_access", "mod_accesslog", ) var.rundir = "/home/work/lighttpd_9876" server.port = 9876 server.bind = "0.0.0.0" server.pid-file = var.rundir + "/log/lighttpd.pid" server.document-root = var.rundir + "/htdocs/" var.cronolog_path = "/home/work/lighttpd_9876/cronolog/sbin/cronolog" server.errorlog = ... accesslog.filename = ... ... So why is this happening? I've tried several diffrent ports, still the same. Isn't that ports between 8000 and 65535 are the same?

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >