Search Results

Search found 16940 results on 678 pages for 'disk drive'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 172/678 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

  • USB 3.0 hard disk not detected on a particular host controller?

    - by Alvin Wong
    I have a USB 3.0 hard disk which has always been working on my desktop with an XHCI. Now I just bought a notebook with an XHCI (something with Intel's Ivy Bridge setup). The first time I plug the hard disk in its 3.0 port it is detected and working. A few hours later I try to connect it again, but seems that the notebook just ignored it! The light on the hard disk didn't blink as usual (instead it is hold at on). I then tested it with my desktop again and it is working perfectly. It gets trickier when I plug it in the USB 2.0 port of that notebook it is detected and working perfectly (despite the slower speed). Then I try to plug in an USB 2.0 USB flash drive to that USB 3.0 port, and it is detected (of course as USB 2.0). So, there are two USB 3.0 ports on my notebook's XHCI. Both of them are not working with my hard disk but working perfectly fine with my USB 2.0 UFD. What's wrong with it? When I plug in the hard disk, device manager doesn't change. I've tried re-installing the driver for the XHCI, but it changes nothing. Had I broke the USB 3.0-specific pins of both USB 3.0 ports?

    Read the article

  • keepass not working with wine

    - by Decio Lira
    I installed Keepass 1.16 in my thumbdrive, which reportedly works with wine (as per Keepass homepage), but after entering the master password it just hangs and shows the "The program keepass has encountered a serious problem and needs to close" screen. I got this error msg among the stack trace on the terminal: wine: Call from 0x7b844633 to unimplemented function bcrypt.dll.BCryptOpenAlgorithmProvider, aborting On windows, everything runs fine. I'm using wine-1.1.27 on ubuntu 9.04 Any thoughts?

    Read the article

  • Windows XP Disc: corrupt or not corrupt?

    - by Wesley
    Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

    Read the article

  • Should I disable write caching on my Windows 2008 VM?

    - by javano
    I have a Windows Server 2008 x64 Standard virtual machine that runs on a machine with a hardware RAID controller, a Perc 6/i, which has a battery on-board. Doing everything I can for additional performance, I think I should disable this. Is this very dangerous though? My understand is that Battery Backed Write Caching gives a performance boost to the host OS, telling it the write was complete when they are still sitting in flash waiting to be written. However, I can't see how it would be detrimental to performance, but is there a gain (even if marginal) to enabling it / disabling it? P.s. There machine has a backup power. Here is a screen shot for clarification:

    Read the article

  • How to re-do the hard disks in a WD Word Book Edition II ?

    - by jfmessier
    I recently purchased a WD World Book II, a 2 TB one. I call it the "White Box". It has those 2 1TB drives, and they were in this RAID 1 config, only giving me about 1 TB. I could not delete the raid array, and I took the drives in a Linux box. But I also deleted the entire partitions of the disks, and I cannot even et the existing RAID array on this WD White Box. The drives are fine, but I cannot get them to work on the WD White Box. My goal was to get back to a real 2 TB storage space. If I cannot get those drives back in the White Box, I can re-use them elsewhere, but this would mean a waste of the firmware and network connection. After the fact, I read that, anyway, the network performance is rather poor. Thanks :-)

    Read the article

  • Software or testing pipeline for testing multiple hard drives

    - by lions_leash
    I have a whole bunch of hard drives (maybe 10 or so) from a variety of sources that I'd like to test. If they work, I will put them in use and/or give them away. I was going to simply open up one of my machines and plug each one in, one at a time, and troubleshoot from there. Is there a way (or set of tools) that I can use to make this process easier and/or faster?

    Read the article

  • How can I keep a file in Windows 7's cache?

    - by netvope
    Sometimes you know better than Windows what files will be re-used later. Suppose you have 8GB of memory, and you use the same 1GB file every hour in an I/O-bound application (which takes 1 second to finish if the file is cached, and 1 minute if not.) Now you process some other 16GB of data that are not going to be re-used. Naturally the frequently used 1GB file will be pushed out of the cache. It would be beneficial if one can tell Windows to keep that 1GB file in memory. (Better yet, it would be great if I can tell Windows not to cache those 16GB of data, but I'm not optimistic that this can be done.) The poor-man's way to keep a file in the cache would be to keep reading the file. Are there any better ways? Are you aware of any programs that do this? (If this can be easily done under Linux, please let me know too.)

    Read the article

  • Good OS (gOS) instalation from USB key

    - by Peter Stegnar
    I would like to install Good OS from USB key. I have found a nice instructions http://www.pendrivelinux.com/usb-gos-install-from-windows/. Everything is OK while USB key is being prepared. But when I am trying to boot from that USB key I get the following error: "no bootable partition in table" It seems like USB key is not prepared properly ... How can I install gOS from USB key?

    Read the article

  • Strange performance from RAID5 using WD RE4 disks

    - by Howard
    I've noticed a bit of a performance issue with some WD RE4 drives I'm using under AMD's hardware RAID solution. First a bit of background: Environment: Windows 7 home premium x64 HDD's: 3x 1TB WD Raid Edition 4 in a RAID 5 setup with 128 kbyte stripe (2TB usable space) Testing Tool: HD Tune, process set to "High Priority" Processor: AMD Phenom II x6 1100T Ram: 16GB DDR3/1600mhz Motherboard: MSI 970A-G45 The image below pretty much depicts the issue I'm having. Every test has the same thing, a period of similar length where the performance drops to a few megabytes a second. This can't be a TLER issue as the purpose of RE4's is to work around that. Any help would be greatly appreciated.

    Read the article

  • Conflicting answers from du with different units

    - by dpitch40
    My question is quite simple. I get this output when checking the total amount of space I'm using on my Walkman. david@Milton:/media$ du -b --max-depth=0 WALKMAN/ 14823290693 WALKMAN/ david@Milton:/media$ du -k --max-depth=0 WALKMAN/ 14523776 WALKMAN/ Last I checked, 14,523,776 KB * 1024 = 14,872,646,624 B, not 14,823,290,693. Dividing the two, their "K" unit seems to be equal to about 1020.62 rather than 1024 as advertised. This is causing some errors in the program I wrote to sync my Walkman, so it fills up faster than it claims to. Can anyone explain this discrepency?

    Read the article

  • Calculate minimum ext3 partition size for certain amount of data

    - by Daniel Beck
    These following ext3 partitions contain identical data. As we can see, the larger the partition size, the more space is required for the same files: Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop11 3965777 561064 3199964 15% [...] /dev/loop19 573029 543843 29186 95% [...] Filesystem Size Used Avail Use% Mounted on /dev/loop11 3.8G 548M 3.1G 15% [...] /dev/loop19 560M 532M 29M 95% [...] Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop11 1024000 1656 1022344 1% [...] /dev/loop19 1024000 1656 1022344 1% [...] I start with a partition of fixed size that possibly wasted a lot of space and I want to create a partition that is able to hold that data but with (almost) minimal size. How can I reliably calculate that minimal partition size needed for storing a certain amount of data? The amount of data changes over time, and I need to automate these calculations.

    Read the article

  • HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

    - by Jaime
    Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

    Read the article

  • Why does sharepoint claim not enougth disk space for backup when there is lots availalbe?

    - by Mr Shoubs
    I'm trying to run the following command: Backup-SPFarm -Directory E:\Backups -BackupMethod full -Verbose However it errors saying there isn't enough disk space... the backup will be about 1.8Gb in size, I have 27.52GB free, so why does it think I need 30Gb? VERBOSE: Leaving BeginProcessing Method of Backup-SPFarm. VERBOSE: Performing operation "Backup-SPFarm" on Target "SHAREPOINTSERV". Backup-SPFarm : There is not enough disk space. Free additional space on your h ard disk and then try again. Approximate amount of space needed: 30.12 GB. Amou nt of space free on disk: 27.52 GB. At E:\Backups\Script\BackupSharePointFarm.ps1:3 char:14 + Backup-SPFarm <<<< -Directory E:\Backups -BackupMethod full -Verbose + CategoryInfo : InvalidData: (Microsoft.Share...mdletBackupFarm: SPCmdletBackupFarm) [Backup-SPFarm], SPException + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletBackupFa rm VERBOSE: Leaving ProcessRecord Method of Backup-SPFarm. VERBOSE: Leaving EndProcessing Method of Backup-SPFarm.

    Read the article

  • Problem with gmailfs

    - by user35529
    Hello(????????????) I've got a little with gmailfs. I'm trying to mount gmail accout as a local file system on my Debian Lenny using the following command. mount -t gmailfs none /mnt/gmail -o [email protected],password=mypassword,fsname=SixSixSix But it gives my garbage like this Ignored option :rw Traceback (most recent call last): File "/sbin/mount.gmailfs", line 166, in <module> main(mountpoint, namedOptions, useEncfs) File "/sbin/mount.gmailfs", line 92, in main gmailfs.main(mountpoint, namedOptions) File "/usr/lib/python2.5/site-packages/gmailfs.py", line 1175, in main server = Gmailfs(namedOptions,mountpoint,version="gmailfs 0.8.0",usage='',dash_s_do='setsingle') File "/usr/lib/python2.5/site-packages/gmailfs.py", line 611, in __init__ self.ga.login() File "/usr/lib/python2.5/site-packages/libgmail.py", line 316, in login raise GmailLoginFailure("Login failed. (Wrong username/password?)") libgmail.GmailLoginFailure: 'Login failed. (Wrong username/password?)' Username and Password are totally correct.

    Read the article

  • Why do "ls" in UNIX and "dir" in DOS have different names?

    - by bizso09
    Why do they have different names for the same command, listing a directory? Surely, they could have talked to each other and agreed on one common name, such as for example cd which is the same for both unix and dos. This decision to have different names has created many headaches for developers and users and also increased incompatibility between the two systems. Did they do it on purpose? Then how come "cd" is the same?

    Read the article

  • losetup does not decrypt device in Ubuntu 11.4 as before

    - by Kay
    I had an external volume mounted using losetup for about two years. It was created using Ubuntu 9.4 and I used the same Ubuntu installation throughout all dist upgrades. Now as I bought a new laptop I set up a fresh Ubuntu 11.4 installation on it. Problem is: losetup -e twofish /dev/loop0 /dev/sdb2 does not decrypt the volume anymore. The data in /dev/loop0 contains apparently random data. I am sure I entered the correct password. I modprobe'd cryptoloop and twofish. My question is: Has Canonical done some obscure changes to losetup like adding a salt? Does losetup depend on configuration files I did not know about? How can I decrypt the volume on my now laptop?

    Read the article

  • Debian Harddrive Fdisk - Same ID's and changing letters

    - by James Willson
    I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

    Read the article

  • Shopping for Fast USB Flash Drives

    - by Jim McKeeth
    I would like to pick up some really fast USB flash drives in the 16 - 64 GB range. When looking at drives they just list their size, their form factor (key chain hook, slider, etc.) and the fact that they are all Hi-Speed USB 2.0. It seems like I have heard that different drives have different performance and life expectancy. The sales guy tells me that they are all the same performance any more, but it wouldn't be the first time a sales guy had the wrong technical details. Our objective is to run Virtual PC images off of them, so good speed and resilience to rewrites it important.

    Read the article

  • Driver for writing to UDF partitions from Windows XP?

    - by davr
    I'm considering using an UDF partition to share data between Windows XP, 7, and Linux. It's more efficient than FAT32, and avoids the 4GB max file size limit. I've found it will also work with Mac OS X, more details in this questions. However, in Windows XP, it is read-only. I'd like to write to it too. Are there any drivers that will allow this? I've found a few that support writing UDF...but they are designed for writing to CDs or DVDs, not specifically for HDDs or USB Flash drives: DLA, InCD, Drag-To-Disc. Will any of those 3 drivers work for HDDs/USB Flash drives? Or is there another driver that will do what I want? Thanks.

    Read the article

  • Why does dstat show zeroes for disk activity on my virtual private server running Ubuntu?

    - by Jonathan Berger
    I'm trying to monitor the number of disk reads and writes on my VPS (Rackspace in this case) running Ubuntu 9.04. I realize there are many tools to do this, but when using dstat 0.7 I tried the following command: dstat -d The output is just two columns of zeroes even when I upload a large file via scp that should be causing a large number of disk writes. Why is this, and how do I get dstat to correctly display the number of disk reads and writes?

    Read the article

  • HD latency measurement using bonnie++ on different machines with different RAM size

    - by j0nes
    Hello, I have run bonnie++ v1.96 on two different servers without any additional load. One server is a "physical" Dell server with 32GB RAM, the other one is a virtual instance with 14GB RAM. I have read in the bonnie manuals that I should use two times the size of RAM in my bonnie runs, so I used 64GB on the physical machine and 28GB on the virtual machine. Now I want to compare the results, and I am wondering whether the results are comparable at all. The most interesting part is the latency part - on the physical machine, the values are about 10 times higher than on the virtual machine! Can I take these results seriously (e.g. the virtual machine HD is much much faster) or does the different RAM size tamper the results? Thanks! Jonas

    Read the article

  • Clicking or Knocking with Seagate HD

    - by Daniel A. White
    My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >