Search Results

Search found 5643 results on 226 pages for 'machines'.

Page 173/226 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• Can't view other computers on Network

  - by Darkart

  Systems: My Machine: Windows 7 Ultimate connected through ethernet into router Her Machine--Other Machine: Windows 7 Ultimate connected through wireless Router:F5D8236-4 N Wireless Router Version 1 Firmware: 2.01.03 (Apr 28 2009) ISP: Comcast Problem: I can not view the "Other Machine" on the network at all. I opened command prompt and ran net view and saw the pc name. I tried pinging the pc and it times out. Went inside the router and tried viewing the computer on the DHCP list and it can not be seen. I restored the router back to default settings and firmware and completely reset the modem and router, and created home group. I went to the other machine to configure home group settings and made sure that both PC's had identical settings. She was able to see my machine but I could not see hers. I restarted both machines and now we cant see each other at all. Also her PC ("Other Machine") had exclamation mark in the wireless icon but was connected just fine. There is no firewalls on currently or anti-virus enabled, and still can not see each other. Right now I am checking for updated drivers for the wireless card, but my question is could it be the router or something hardware related? I have went through all the settings in the Home group and visited most FAQ's and still no luck. Also as it stands I can not view her machine inside the router DHCP Client List :(

  Read the article

• VMware Workstation update stopped autofit guest working

  - by u8sand

  VMware one day offered an update (8.0.1 build-528992 my current version) from 8.0. I accepted it, because updates usually fix problems. However not in this case... Previously it worked very well. Now, it still "works" but the one glitch I'm getting makes it too hard to deal with. This screenshot will explain my problem: As you can see, my virtual PC is not resizing correctly. (This happens with any operating system), autofit guest just doesn't work - it only results in things like this happening. Thanks to the tools it becomes very hard to NOT autofit guest. I've tried uninstalling 8.0.1 completely and installing 8.0 again but with the same results. I don't really understand what the new update has done to VMware Workstation or to my virtual machines. I do believe this isn't VMware Workstation's direct fault but from VMware Tools, which would explain why going back to 8.0 didn't work since VMware tools has its own updates. How can I fix this? The host is running Windows 7 Ultimate 64-bit.

  Read the article

• AD server within another network - DNS issues

  - by Harry Muscle

  Here's a quick summary of the environment I support: we have a domain (domain A) that has about 20 client computers. The domain server for this domain and all the clients sit within the network infrastructure of a larger domain (domain B). All the computers get their network settings via DHCP from domain B's servers. I have no control and am unable to make changes to anything to do with domain B. The problem I have is that currently in order for my domain's (domain A) clients to be able to resolve the domain server and the shares on it they have their DNS server IP address set to domain A's domain server (via the default GPO). Unfortunately when a laptop (windows and mac) gets taken home, they are still looking for the domain server as their DNS server and obviously can't access the internet correctly outside of our environment. Ideally I need a solution where the machines use domain A's domain server as their DNS when inside the office and use what ever DNS server DHCP gives them when they are outside the office. However, since I have no control over the office DHCP server, I'm not sure how this can be accomplished. Any help and advice that anyone can offer is highly appreciated. Thanks, Harry P.S. The solution I'm trying to find needs to require no involvement from the user.

  Read the article

• NFS4 permission denied when userid does not match (even though idmap is working)

  - by SystemParadox

  I have NFS4 setup with idmapd working correctly. ls -l from the client shows the correct user names, even though the user ids differ between the machines. However, when the user ids do not match, I get 'permission denied' errors trying access files, even though ls -l shows the correct username. When the user ids do happen to match by coincidence, everything works fine. sudo sysctl -w sunrpc.nfsd_debug=1023 gives the following output in the server syslog for the failed file access: nfsd_dispatch: vers 4 proc 1 nfsv4 compound op #1/3: 22 (OP_PUTFH) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsv4 compound op ffff88003d0f5078 opcnt 3 #1: 22: status 0 nfsv4 compound op #2/3: 3 (OP_ACCESS) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsv4 compound op ffff88003d0f5078 opcnt 3 #2: 3: status 0 nfsv4 compound op #3/3: 9 (OP_GETATTR) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsv4 compound op ffff88003d0f5078 opcnt 3 #3: 9: status 0 nfsv4 compound returned 0 nfsd_dispatch: vers 4 proc 1 nfsv4 compound op #1/7: 22 (OP_PUTFH) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsv4 compound op ffff88003d0f5078 opcnt 7 #1: 22: status 0 nfsv4 compound op #2/7: 32 (OP_SAVEFH) nfsv4 compound op ffff88003d0f5078 opcnt 7 #2: 32: status 0 nfsv4 compound op #3/7: 18 (OP_OPEN) NFSD: nfsd4_open filename dom_file op_stateowner (null) renewing client (clientid 4f96587d/0000000e) nfsd: nfsd_lookup(fh 28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba, dom_file) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsd: fh_lock(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) locked = 0 nfsd: fh_compose(exp 08:01/22806529 srv/dom_file, ino=22809724) nfsd: fh_verify(36: 01070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking fh_verify: srv/dom_file permission failure, acc=804, error=13 nfsv4 compound op ffff88003d0f5078 opcnt 7 #3: 18: status 13 nfsv4 compound returned 13 Is that useful to anyone? Any hints on to debug this would be greatly appreciated. Server kernel: 2.6.32-40-server (Ubuntu 10.04) Client kernel: 3.2.0-27-generic (Ubuntu 12.04) Same problem with my new server running 3.2.0-27-generic (Ubuntu 12.04). Thanks.

  Read the article

• VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

  - by Richard

  I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

  Read the article

• Windows file locks allowing multiple users to write to open file over network

  - by JPbuntu

  I have 6 windows computers (xp,vista,7) that need to access a samba share (Ubuntu 12.04). I am trying to make it so only one client can open a file at a given time. I thought this was pretty standard behavior of file locks, but I can't get it to work. The way it is right now a file can be open by two users, and changed and saved by either one of them. The last file saved overwrites what ever changes the other user made. At first I thought this was a Samba configuration problem, but I get this behavior even between two windows machines. So far I have only tested: Windows Xp Windows Vista Windows XP Samba << Windows Vista and both give the same behavior. When I tested the Samba configuration, I had set strict locking = yes and get errors logged like this: close_remove_share_mode: Could not get share mode lock for file _prod/part_number_list_COPY.xlsx Eventually all of the files are going to be moved onto the Samba share, so that is the configuration I am most concerned about fixing. Any ideas? Thanks in advance. EDIT: I tested an excel file again, and it is now working properly in both above mentioned cases, I am also no longer getting the above mentioned error. I don't know what happened, perhaps a restart fixed it? (also works with strict locking = no) Although I still need to find a solution for the CAD/CAM files we use, the software is Vector and it does not seem to be using file locks. Is there any software that I can use to manage these files, so two people can't open/edit them at a time? Maybe a windows application that forces file locks? Or a dirt simple version control system? (the only ones I have seen at are too complicated for our needs).

  Read the article

• NFSv4 "Too many levels of symbolic links" error

  - by user1434058

  Both machines are running Ubuntu 12.04 Remote NFSv4 Client $ ls /mnt/storage/aaaaaaa_aaa/bbbb/cccc_ccccc gives this error: ls: reading directory .: Too many levels of symbolic links How can I fix this? When error occurs ls start listing the files, however PHP brakes. On the NFSv4 Server In /etc/fstab: /mnt/storage /srv/storage none bind 0 0 In /etc/exports /srv 192.168.1.0/24(rw,async,insecure,no_subtree_check,crossmnt,fsid=0,no_root_squash) /srv/storage 192.168.1.0/24(rw,async,nohide,insecure,no_subtree_check,no_root_squash) ERROR root@ds:root@ds:/mnt/storage/foreign_dbs/imdb/imdb_htmls# ls -l | head ls: reading directory .: Too many levels of symbolic links total 10302840 -rw-r--r-- 1 root root 10484 Jul 5 13:56 0019038.gz -rw-r--r-- 1 root root 16264 Mar 30 00:31 0259701.gz -rw-r--r-- 1 root root 13784 Mar 30 14:20 1000000.gz -rw-r--r-- 1 root root 12741 Mar 30 13:04 1000003.gz -rw-r--r-- 1 root root 12794 Mar 30 12:40 1000004.gz -rw-r--r-- 1 root root 13123 Mar 30 12:07 1000005.gz -rw-r--r-- 1 root root 13183 Mar 30 12:04 1000006.gz -rw-r--r-- 1 root root 13443 Jul 4 01:16 1000007.gz -rw-r--r-- 1 root root 12968 Mar 30 11:05 1000008.gz I came across it in PHP. scandir would return 1612577.gz & 1612579.gz, but skips 1612578.gz and yet the file types and properties are identical on them and this only happens on the nfs client, works 100% on the server

  Read the article

• Ripping CD Audio simultaneously from 2 drives on one PC via USB or PATA - rip accuracy preserved?

  - by Rob

  I'm considering ripping audio (reading audio) from CDs using 2 drives simultaneously to speed up the process of ripping the CDs - i.e. 2 at a time rather than 1. Are there any issues with achieving maximum rip accuracy? In general I wondered if people have tried this and if the simultaneous streams from both rip activities would overload the host machine and cause packet loss or read retries resulting in a sub-standard CD-DA Audio CD rip? If it just means the rip is slightly slower (but still faster than sequentially doing one rip followed by another) but still of maximum accuracy then that is OK for me. I will be using dbPowerAmp to rip the CDs and converting to FLAC lossless format. Specific examples: There are 2 machines I intend to do it on: A Toshiba NB100 1.6Ghz Atom netbook, 2Gb RAM, running Windows XP Home with 1 external LG DVD/CD burner and external 1 LG Blu-ray burner attached via USB 2.0, ripping to the machine's 5400rpm internal hard drive. This rips from one CD drive very well, more than adequate, it is a nippy, fast little machine for its specification. A Desktop PC running Windows 7 Home Premium with MSI P4M900M2-L/ MS-7255v2.0 motherboard and 1.86Ghz Intel Core 2 Duo E6320, 7200rpm hard drive and 2Gb RAM, with an internal LG PATA DVD/CD burner (master) and a Philips DVD/CD burner (slave) on the same PATA bus (perhaps separate buses would be another option to consider here). Thoughts?

  Read the article

• Network profile reverts to 'Unidentified' following Windows Update reboot

  - by user140575

  I have searched high and low for a solution to this problem. I have multiple servers running Windows 2000 Server as well as Windows Server 2003, 2003 R2, and 2008 R2. All of these servers are on the same Active Directory domain. The servers run showing the network profile as Domain Network, which is fine and correct. However, when a Windows update is installed, the server changes the profile to Unidentified Network once it has rebooted. This then doesn't allow any traffic to the server. For security reasons, we can't turn the firewalls off for. The only way to fix the problem is to physically be in front of the machine and work on it to change the profile back. Once the Profile has been reinstated to the Domain profile, it will be fine until the next month's update. This happens on all the Windows software mentioned above. The machines are not all identical, so it's not a hardware problem either. If anyone can help I'd be very grateful.

  Read the article

• How to direct reverse proxy requests using wildcard vhosts

  - by HonoredMule

  I'm interested in running a reverse proxy with 2-3 virtual machines behind it. Each internal server will run multiple virtual hosts, and rather than manually configuring each individual vhost on the proxy (a variety of vhosts come and go too often for this to be practical), I would like to use something which can employ pattern matching in a sequential order to find the appropriate back-end server. For example: Server 1: *.dev.mysite.com Server 2: *.stage.mysite.com Server 3: *.mysite.com, dev.mysite.com, stage.mysite.com, mysite.com Server 4: * In the above configuration, task.dev.mysite.com would go to Server 1, dev.mysite.com would go to Server 3, yoursite.stage.mysite.com to Server 2, www.mysite.com to Server 3, and yoursite.com to Server 4. I've looked into using Squid, Varnish, and nginx so far. I have my opinions regarding their respective desirability and general suitability, but it's not readily apparent if any of them can handle dynamic server selection in this manner and not require per-vhost configuration. Apache on the other hand can do this handily and simply, but otherwise (aside from being well-known and familiar) seems very poorly suited to the partly-performance-serving task. Performance isn't actually a major concern yet, but it seems foolish to use Apache if another system will perform far better and can also handle the desired 'hands-free' configuration. But so is frequently having to adjust the gateway for all production services and risk network-wide outage...and so also is setting oneself up for longer downtime later if Apache becomes a too-small bottleneck. Which of these (or other) reverse proxies can do it/would do it best? And maybe I should post this as a separate question, but if Apache is the only practical option, how safe/reliable/predictable is apache-mpm-event in apache2.2 (Ubuntu 12.04.1) particularly for a dedicated reverse proxy? As I understand it the Event MPM was declared "safe" as of 2.4 but it's unclear whether reaching stability in 2.4 has any implications for the older (2.2) versions available in official/stable package channels of various distros.

  Read the article

• SharePoint Backup/Restore without stsadm

  - by Kevin

  Due to problems we found with the restore of sites/site collections using stsadm (our tasks generated from workflows were not restored), we've taken a different route for backup/restore. We plan a major customization to our SP site and want to take a backup so we can rollback in case the install fails. In our System Testing (not production) environment, we've backed up the 12 hive, the virtual dir's that the IIS points to SharePoint, and the SharePoint databases in SQL (using SQL server to do the db backups). We have custom event handlers and workflows built with Visual Studio, and deploy the dlls to the GAC as version 2 (signed and versioned in Visual Studio). So when we deploy, the GAC will contain 2 versions of the workflows - version 1 and version 2. During the deploy we use SP stsadm features to install/activate the WF's. We also go to each library and add the new, version 2 WFs. This automatically sets the version 1 WF's to "Not Allow" new instances (which is what we want) and the version 2 as active - perfect so far. When we've completed the install, we then assume a failure and attempt to restore to the same machines (SharePoint on one server, SQL on another). We start by uninstalling the version 2 WF's from the GAC, reset IIS (to clear cache of these ver. 2 WF dlls'), restore the 12-hive and virtual directory folders, then restore the SQL dbs. This is all just as manual as you read it - no stsadm here. All seems to work after our restore, it appears the restore was successful - the mods we made to column names, data changes, etc during the install are all reverted back to the original pre-install state. With one exception. When we run a workflow, it always fails and the Logs in the 12-hive indicates the WF is still trying to use the version 2 of the dll (System.IO file not found error) We think we've backed up and restored all the moving pieces of Sharepoint but we're missing something here, does anybody have any ideas why the version 2 WF dlls are still being referenced eventhough we restored all the folders and db's of SharePoint? Thanks, Kevin

  Read the article

• ZFS: Mirror vs. RAID-Z

  - by John Clayton

  I'm planning on building a file server using OpenSolaris and ZFS that will provide two primary services - be an iSCSI target for XenServer virtual machines & be a general home file server. The hardware I'm looking at includes 2x 4-port SATA controllers, 2x small boot drives (one on each controller), and 4x big drives for storage. This allows one free port per controller for upgrading the array down the road. Where I'm a little confused is how to setup the storage drives. For performance, mirroring appears to be king. I'm having a hard time seeing what the benefit would be of using RAIDZ over mirroring would be. With this setup I can see two options - two mirrored pools in one stripe, or RAIDZ2. Both should protect against 2 drive failures, and/or one controller failure...the only benefit of RAIDZ2 would be that any 2 drives could fail. The storage should be 50% of capacity in both cases, but the first should have much better performance, right? The other thing I'm trying to wrap my mind around is the benefit of mirrored arrays with more than two devices. For data integrity what, if any, would be the benefit of a RAIDZ over a three-way mirror? Since ZFS maintains file integrity what does RAIDZ bring to the table...doesn't ZFS's integrity checks negate the value of RAIDZ's parity?

  Read the article

• Dual Monitor support rdp 7 to win 7 on esxi

  - by rphilli5

  I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

  Read the article

• No Outbound Internet on Windows Home Server

  - by Kyle B.

  Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

  Read the article

• Mac Mini server (10.6) behind router with FQDN hostname

  - by thechriskelley

  I have a Mac Mini running Mac OS 10.6.6 Server that will be part of a local network, and a static IP from my ISP. I'd like to set up DNS for the Mini with a FQDN as the hostname (example.com) properly. The Mini is behind a router (Apple Airport Extreme) and is given a private, static IP address. I can't assign it the public static IP directly because it's behind a router with DHCP/NAT for other machines on the local net. My end goal here is for services to resolve to the server properly from outside and inside the local network to users via example.com (and subdomains like mail.example.com, www.example.com), which will point to the public static IP assigned to the router. Will DNS work/resolve properly (for mail services and other subdomains) if it has a private ip address, but the necessary services are forwarded properly through NAT? I'm open to any (hopefully better) suggestions, as my current setup doesn't seem like it's the best way. Currently, more hardware or another public static IP is not possible. With the current setup, it seems as though one static IP is not necessary anyway. Thanks in advance for any insight.

  Read the article

• I love google Chrome, but some non-static pages like Piwik render it unresponsive

  - by gogowitsch

  The web-stat software Piwik stops reacting on mouse clicks after 1-2 seconds. The same is true for Google Maps and Producteev (but GMail and most other pages work like a charm). These rely heavily on JS, and work without Flash. I can click for a very short time period and then the mouse cursor doesn't feel the UI anymore (it doesn't turn into a I over input fields, though it moves; if the freeze occured while the pointer was over an input field, the cursor keeps being a I) and all clicks on the DOM are being ignored by Chrome. No message appears, neither obvious nor in the Console (F12). There is no obstructing div or the like in the DOM (F12). Since I couldn't find any hints on the source of my problems, I suspected my plugins and extensions. Unfortunately, neither deactivating all plugins nor all extensions solved the problem. for the problematic pages, it always happens no Dropbox running several GB of free RAM the taskmanager doesn't show any high CPU or memory utilization (the offending tab uses 30 MB and uses 0-1 % CPU) all problematic pages work in other browsers (Chrome, Firefox, IE) the rest of the computer is very responsive the computers use different security suites (Kaspersky and Avira) The effect exists between several (synchronized) Chrome instances on different machines, all running Windows 7. Both the OS and Chrome are updated automatically. Other tabs and the Chrome chrome (tabs, menus, toolbar buttons of the browser itself) still work. I really don't like switching between browsers. Any ideas?

  Read the article

• Setting up Squid -> VPN connection

  - by Nedlinin

  I recently purchased a VPS and am wanting to use it as a VPN server. However, it has bandwidth limitations. So, I figured since I already have a local Squid proxy caching things for me, I could have users connect to the proxy and the proxy connect to the VPN. Then when someone hits the web, Squid will serve it from cache if available and, if not, it will use the VPN to download it. My issue is, I have no idea how to set this up :p - Essentially I want Machine - Squid - VPN. My VPN is running on Ubuntu Server with pptpd. Squid is running on a local Arch Linux box. Squid and the VPN are both working perfectly independently. Any help on how to have Squid push traffic through the VPN would be greatly appreciated! Also: I don't actually want to use the VPN for all traffic. Otherwise, I'd just connect my router to the VPN and be happy. I only want to use it for web traffic from specific machines on the network.

  Read the article

• Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

  - by Richard Maynard

  We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

  Read the article

• ReadyBoost in Windows 7

  - by Robert Koritnik

  I've bought an SD card today for my phot frame, but when I inserted it into my notebook I saw I could use it for ReadyBoost. Some background I'm a .net developer, using VMs and developing web applications (and Sharepoint). I use an HP notebook machine with Core 2 Duo 2GHz + 4GB RAM + 320 7200 HD. I simultaneously run Visual Studio 2010 with some plugins SQL Server Firefox with at least 10 tabs Chrome with about 5 tabs IIS VM with Server 2008 machine Sharepoint and occasionally also Photoshop and some InDesign as well. So I don't let my machine have a break. :D Question If I buy myself some really fast SDHC card (like SanDisk 16GB Extreme 30MB/s - is there anything faster) and use it with my Windows 7 ReadyBoost, will I see any performance gain? Is it going to work something similar to Seagate's HybridDrive Momentus with 4GB of solid state drive? What could I actually expect if I do put this card into my machine? And what would be recommended size? Observations I guess redirecting page file to it would speed up the system. Some VM machines on it would probably run faster as well because they could run parallel to HD host system I guess. Am I right or wrong?

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

• Windows 7 PC cannot see some LAN PCs, but can access them via path

  - by zoot

  In an office LAN, with Windows 7 Professional workstations and a FreeNAS Samba server, 2 workstations have intermittent problems in browsing for the other workstations, as well as the FreeNAS server. However, so far, it appears that typing in the path to any of the workstations which aren't visible via the "browse" function, works. ie. the machine Workstation7 is not visible while browsing via Windows Explorer, but is accessible if I type \\Workstation7 in the path field. Occasionally the workstations exhibiting these symptoms show errors that their connection to the FreeNAS server has failed and only rebooting resolves the issue. All other workstations on the network use identical Windows 7 Professional installations and never have these problems. I've checked all machines and they're not using Home Groups. All are setup on the same WorkGroup as the FreeNAS server and the network type is set to Work Network. Temporarily disabling the firewall on the workstations with the issue made no difference, so I know this has nothing to do with the firewall settings. Any pointers would be appreciated. Thanks.

  Read the article

• is it worth to use load balancer on web server/website

  - by user427969

  I have a website and a while ago, the web server of the company hosting my website was down for about a day. I consulted the company for a solution on how i can stop this from happening in future and they suggested to have a second machine and which will be connected to my current website/web server by a "load balancer" (at an additional huge cost!!!). The second machine will be replicate of the first one and so if i goes down, the other will always be running. ---- Explanation ----- My hosting company suggested that it will be a good idea to have a second machine running at the same time and both the machines will be connected by a load balancer which reduces the rist of a downtime. The second machine will be a mirror of the first and any changes to first must be replicated in the second. I don't mind spending money if it really saves my website from going down. I want to know is it worth having this "load balancer" for my purpose? My website is a 24/7 service. I cannot afford an outage of 24 hours/1 hour. I don't mind using this "load balancer" as far as it is really worth. I am not sure if its just a marketing trick of my hosting company or really a "best" solution Thanks for help. Regards

  Read the article

• Windows Server 2008 Remote Desktop printing blank pages

  - by Colin Pickard

  I have a Windows Server 2008 (not R2) machine which has problems with redirected printing. Clients connecting via Remote Desktop have their printers redirected and appearing for them to print to, but printing from applications on the server to local printers is giving blank pages, missing pages, or pages with headers/footers but no middle section. The issues are consistant for similar prints, but sometimes other prints and/or applications will work correctly. I have installed PDFCreator locally on the server, and the same print jobs sent by the same application appear correctly in the PDFs. Printing that PDF via the redirected printer prints correctly. I have tried the following: Installing drivers. I’ve installed several drivers different drivers, for both the client and server operating system and architecture, on the client and the server. Reinstalling the printers. I’ve tried reinstalling on remote print servers, the clients, and the host server, and tried different client machines. Granting everyone full permissions on the print spool folder on the server. Editing the registry to forward non-USB ports (http://support.microsoft.com/kb/302361) None of these have made any difference. The clients are using Windows 7 or Windows XP and none of them have any issues with printing locally. Any ideas? Thanks!

  Read the article

• DisableCrossAccountCopy not working on some Outlook installs, working on others, both going against Exchange

  - by MikeBaz

  As part of a mail migration project from one Exchange organization to another, we need to be able to prevent users from moving/copying messages between their accounts in each organization. (Yes, users will think this is evil; no, it's not my decision; yes, users will hate us.) Luckily, we thought, Outlook 2010 provides the DisableCrossAccountCopy registry value/policy (cf. http://technet.microsoft.com/en-us/library/ff800883.aspx). (Because you can't do multiple Exchange organizations in a single profile before Outlook 2010, this only matters on Outlook 2010. Yes, I'm ignoring for the sake of this question copy/move to/from the filesystem.) In our test lab, in a test forest with a test Exchange organization, with a second Exchange account added to the profile in either of the "real" Exchange organizations, with the value set to "*", everything works as expected. On a workstation in one of the production domains, however, the setting does not seem to work. We have tried it under HKCU, HKLM, HKCU\Software\Policies, and HKLM\Software\Policies. It simply seems to be ignored. The value was set in the OCT on a test machine, but the OCT (and the ADM/ADMX file) have the wrong type for the value. We have located the value in the registry and removed it everywhere it is found, we think, and put it back in HKCU, but it still isn't taking. At the moment, a clean Outlook install is not an option - even if it was, we at this point would need to know what to do to fix the pushed copy (I didn't push the copy out to thousands of machines, I've just been asked to help clean up the current mess). Thoughts?

  Read the article

• Joining Samba to Active Directory with local user authentication

  - by Ansel Pol

  I apologise that this is somewhat incoherent, but hopefully someone will be able to make enough sense of this to understand what I'm trying to achieve and provide pointers. I have a machine with two network interfaces connected to two different networks (one of which it's providing several other services for, such as DNS), running two separate instances of Samba, one bound to each interface. One of the instances is just a workgroup-style setup using share-level authentication, which is all working fine. The problem is that I'm looking to join the other instance to an MS Active Directory domain (provided by MS Windows Small Business Server 2003) to enable a subset of the domain users to access the shares from Windows machines on the other network. The users who need access from the domain environment have accounts (whose names are all-lowercase versions of their domain usernames) on the machine running Samba, but I'm not sure about how to map the UIDs and everything I've read concerns authenticating accounts on that machine against either AD or another LDAP server. To clarify: I only want the credentials for AD users accessing the non-workgroup Samba instance to be authenticated against AD, not the accounts on the machine running Samba. I hope this is sufficiently clear. EDIT: In addition to being able to access the Samba shares from AD, I do also need to be able to access a share on the domain from the machine running Samba but would still like everything non-Samba-related to authenticate locally.

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >