Search Results

Search found 7179 results on 288 pages for 'slow logon'.

Page 173/288 | < Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >

• How is it possible for SSD's drives to have such a good latency?

  - by tigrou

  First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's are just the opposite. But here is how it works : SSD drives increase their bandwidth by using several NAND flash chips in parallel. In other words, they do some data striping (aka RAID0) across several chips (done by the controller). What i don't understand is how SSD's drives have such a low latency, whereas they are using NAND chips? (or at least lot better than what a typical single NAND chip would do) EDIT: I think under-estimate NAND chip capabilities. USB drives, while powered by NAND's are mostly limited by USB protocol (which have a pretty high latency) and the USB controller. That explain their poor performance in some cases.

  Read the article

• Rate of UDP packet loss over WLAN

  - by Martin

  While testing something with TFTP I noticed lots of timeouts (and slow speed as result) when I used my WLAN - and no problems when using a network cable. A quick test program sending/receiving UDP revealed that there are about 3-5% packets lost. While it's obvious that WLAN has to be less reliable than LAN, I have no knowledge what loss rates are considered 'normal' - and when there is a need to further investigate the network infrastructure. Are there 'typical' packet loss rates on WLAN (and other network technologies e.g. PowerLAN, WAN, ...? Thanks

  Read the article

• How do I change HOMEDRIVE HOMEPATH and HOMESHARE in Windows XP?

  - by user26034

  I have got a laptop which is configured to have the user profile in a network drive. This is causing me a lot of headaches since the connectivity to my company is very slow. I want to relocate the profile of my user into a local directory. How do I do that? Those are the settings at the moment: C:\>set HOME HOMEDRIVE=P: HOMEPATH=\ HOMESHARE=\\SOMESERVER\_myuser$ The drive P is a network drive mapped to HOMESHARE. I can't find where windows is setting those environment variables, not even in the registry. The laptop is running Windows XP.

  Read the article

• Why does Oracle SQL Developer take so long to open?

  - by oscilatingcretin

  I think anyone who's used Oracle SQL Developer will agree that it's painfully slow on the load. My research has lead me to a solution that seems to have helped a little, and that's telling OSQLD not to check for updates on startup. However, it still takes several minutes to open. What could OSQLD possibly be doing during load time? Is there any way get it to open right away? Edit: Adding potentially relevant system specs: CPU: Intel i5-2520M 2.5 ghz Windows 7 32-bit RAM: 4 gb

  Read the article

• Different versions of 2.5" drives? Unscreawing Intel 320 for slimmer drive to fit newer thinkpads?

  - by hhh

  My x60s laptops come with about 1-2mm heigher 2.5" HDD than newer x220 models. This is totally stupid when one would like to reuse the old drive in the newer laptops. I bought newer 2.5" 320 Intel SSDs and they seem to have such 1-2mm gap to unscrew but I am unsure whether it is meant for opening. Could someone instruct what to do here? Look the manufacturer has started changing the old good 2.5" drives into slightly different versions, now it means slow compability issues to fix or totally new 2.5" drives. Ideas how to proceed? Unscrewing newer 320 drives or are some other versions of 2.5" drives meant for x220? Does there exist some sort of racks to get drives working between different comps? Perhaps booting from laplink is currently the easiest solution to get things working when changing harddrives between comps? Perhaps related http://www.zdnet.com/blog/hardware/seagate-announced-super-slim-25in-momentus-thin-hard-drive/6439

  Read the article

• Is it possible to continue torrent downloads from other client

  - by Nrew

  I have downloaded a torrent file but I downloaded it using bitlord. And because bit lord doesnt have the ability like initial seeding. I decided to use utorrent. Ive already tried to continue it. What I did was to: Opened the original torrent file in utorrent. Target where the incomplete bitlord incomplete file was. But it seems that utorrent isn't detecting the file and it makes another copy of it and start to download from the beginning. Im at about 80 percent and there are only 18 seeds but there's 17 leech. And my connection is slow so I really have to initial seed. Other details: I've reformatted the original machine where I downloaded it. Also didn't copy the original application.

  Read the article

• Application runs with different speed for two different user logins on windows server

  - by karthi

  We have a application in Windows Server that download data from SQL server and store in our local machine. Now the problem I have is my Windows Server has two logins and in one login the app runs real slow, like gets 1 row in a minute, and from another login it fetches 20 rows in a minute. We have this problem only for a last couple of days. What could have caused this? More details: SQL server:S QL server2008 Os: Windows server 2008 Access method: Remote connection. Application: Custom .Net application to get data Both accounts are limited rights accounts. Any tools to track this? I am not sure what should I start with.

  Read the article

• credit or minclass does not work well with pam_cracklib.so in common-password (opeSuSe 11.3)

  - by Mario

  I'm trying to implement password complexities on my pdc. It's a samba PDC with openLDAP backend. I tried cracklib-check but it looks like that I should have a decent and localize version of password library since the library out there usually comes in english. I also have another consideration that we will allow users to use any kind of password - even though it's dictionary based - as long as their passwords integrated with low/upper alphabet, digits, and other characters such as '$' or '_' (pam_cracklib.so calls them as classes). So here is my /etc/pam.d/common-password: #password requisite pam_pwcheck.so nullok cracklib password requisite pam_cracklib.so minclass=4 reject_username ##password requisite pam_cracklib.so \ ## dcredit=-1 ucredit=-1 lcredit=-1 ocredit=-1 reject_username password optional pam_gnome_keyring.so use_autht_ok password required pam_unix2.so use_authtok nullok The first commented line (with #) was the default configuration of openSuse 11.3. The 2nd/3rd (with leading ##) is another configuration I use when minclass=4 line is commented out. By the way, I have 'check password script' = /usr/local/sbin/crackcheck -d /usr/share/cracklib/pw_dict and passdb backend = ldapsam:ldap://127.0.0.1 parameters in smb.conf and cracklib-check works fine too. So here is the test I conduct. I logon to windows and then change my password. Sometimes it works fine that it trows error message - which what I wanted, but simple password with only lower alphabets can pass windows change password. Maybe I should make a new library which incorporates local vocabularies, but a guy out there (raise your hand please if you read this :) ) also experienced the same trouble with english word. Besides, what we really want is to let user to choose 2 or 3 format password out of 4 classes. Is there a bug or something with pam module in openSuse 11.3? Thank you in advance. Regards, Mario

  Read the article

• gtk2/mate apps are choppy on debian testing [migrated]

  - by b0ti

  I have recently upgraded to a core-i7 system and now all the apps from mate (GTK2 based) are very slow. Basically when I switch to a workspace that has a couple mate-terminals open, they are redrawn as if these were sent over the network. GTK3 apps and firefox work properly and are refreshed instantly. I'm running Debian testing. I have tried to reinstall xorg and related packages and everything seems to work fine except for this. Here is my xorg.log. Any hints?

  Read the article

• Remotely running batches on a Windows PC

  - by Eduardo León

  I want to remotely control my home desktop PC (running Windows 7 Professional), mainly to perform the following tasks: Downloading email attachments, and sending emails with attachments Running UI-less programs whose only inputs are files and whose only outputs are files So far, the only solution I have found is to use Remote Desktop to connect to my PC, but this is very slow and inefficient, especially when there is no fast Internet connection available other than my cell phone's. I would like to be able to send batch commands to my PC, like: Download an email attachment Use it as input for an UI-less program Save the program's output to a file Send that file to myself as an email attachment Is this possible? How could I do it?

  Read the article

• Monitor windows startup process

  - by vlad-ardelean

  My win7 starts up pretty slow lately. I think it's some kind of malware, but my antivirus software doesn't pick up anything. How could i monitor the startup processes myself? It seems to me like either something's doing a lot of work, or some important windows process hangs for a while, since there's stuff that i can do while it's starting (like start a console), and stuff that i can't do (like execute the systeminfo command in the console) So if you happen to know how i can monitor my system, that would be great. Thx, you guys rule.

  Read the article

• Why using swap file over a SMB/NFS mounted filesystem is not possible in Linux?

  - by Avio

  I'd like to use another machine's unused RAM as swapspace for my primary Linux installation. I was just curious about performance of network ramdisks compared to local (slow) mechanical hard disks. The swapfile is on a tmpfs mountpoint and is shared through samba. However, every time I try to issue: swapon /mnt/ramswap/swapfile I get: swapon: /mnt/ramswap/swapfile: swapon failed: Invalid argument and in dmesg I read: [ 9569.806483] swapon: swapfile has holes I've tried to allocate the swapfile with dd if=/dev/zero of=swapfile bs=1024 (but also =4096 and =1048576) and with truncate -s 2G (both followed by mkswap swapfile) but the result is always the same. In this post (dated back to 2002) someone says that using a swapfile over NFS/SMB is not possible in Linux. Is this statement still valid? And if yes, what is the reason of this choice and is there any workaround to have this working?

  Read the article

• Sharing Internet over Wireless Router

  - by Alandt

  I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

  Read the article

• preloading RSS contents in thunderbird, before actually reading them

  - by Berry Tsakala

  i have thunderbird 3.x, and i'm subscribed to several RSS feeds. How can I tell thunderbird to load/download any new RSS items in the background? The usual behavior with RSS feeds is that it download the headrs, or few introductory lines from the contents, but only when i'm clicking a feed item it starts loading "for real". I really want to receive the feeds and not to wait for them to load, the same way i receive emails in any email client - all messages are fully downloaded at once. there could be several reasons, BTW. - e.g. if i have short connection time, i'd rather connect, sync everything at once, and read it later. - or if i have a slow wifi connection, it's annoying to wait for each and every message, but the computer is idle while reading.. thanks

  Read the article

• encoding movies for the web

  - by ELS

  Hi All, I have a friend that hosts his website on IIS and Windows Server 2003 R2 32-bit. He has .WMV files and .MPG and others and some of these are 30 mb in size! He wonders why users complain the site is slow! So my question is how can we reduce the size of these movies? What software? What settings for bit-rate, etc? Is there free software? I can use either a Mac or a PC. Thoughts are appreciated.

  Read the article

• Windows 7 + NVidia == 640x480 on external projectors

  - by ben2004uk

  Hello, I'm having a major problem and I really need your help! I have a MacBook Air which has the NVidia 9400M. The problem is, when I connect it to an external projector Windows 7 (and Vista) only allow me to connect at 640x480. I need it to use the laptop to present at conferences, as such I need it to work on a number of different projectors - at the moment I need to use OSX and VMWare but it's painfully slow and really doesn't work. At the moment, I'm considering buying a new laptop :( Is there any way to override the screen resolutions provided? I've saw some information around EDID? Thanks Ben

  Read the article

• Experience with MooseFS?

  - by brown.2179

  Anyone have any experience using MooseFS? I want an easy distributed storage platform to store static data archive of about 10 TB and serve it to 20-40 nodes. Also I want to be able to add storage as the archive grows without having to rebuild the filesystem. I don't care if it's a bit slow. I just want it to be simple and stable. Basically from what I can see for OS X it's between MooseFS and Gluster. Any other suggestions?

  Read the article

• Problem running MVC3 app in IIS 7

  - by mjmoore99

  I am having a problem getting a MVC 3 project running in IIS7 on a computer running Windows 7 Home-64 bit. Here is what I did. Installed IIS 7. Accessed the server and got the IIS welcome page. Created a directory named d:\MySite and copied the MVC application to it. (The MVC app is just the standard app that is created when you create a new MVC3 project in visual studio. It just displays a home page and an account logon page. It runs fine inside the Visual Studio development server and I also copied it out to my hosting site and it works fine there) Started IIS management console. Stopped the default site. Added a new site named "MySite" with a physical directory of "d:\Mysite" Changed the application pool named MySite to use .Net Framework 4.0, Integrated pipeline When I access the site in the browser I get a list of the files in the d:\MySite directory. It is as if IIS is not recognizing the contents of d:\MySite as an MVC application. What do I need to do to resolve this?

  Read the article

• Self hosted Wordpress freezes for 20 seconds before sending the page

  - by TheoJones

  I have a website with Wordpress and PHPBB integrated - and it's been fine for months.. then all of a sudden, it's unbelievably slow to load. There are no errors in the apache logs, but looking at the page in firebug shows a 20 second pause, before the page is delivered. more confusing, on the same server, same apache installation, PHPBB loads in 30ms, no delay. I tried the hogdetector wordpress plugin, which indicates that the delay is before the header is sent - which seems to agree with firebug. Any ideas how to troubleshoot this one further?

  Read the article

• centos 5.6, virtual on Vsphere

  - by Glasnhost

  suddenly my virtual centos server (5.6 on VMWare-VSphere) is not working... It started with the url not responding, nor the ip. (NO HTTP response, no ping). When I entered on the server via ssh to start troubleshooting I noticed that most of commands don't work anymore: top- machine hangs (it's not slow anyway) ps - machine hangs (funny enough apache server and web app are running and sending me emails) on some directory ls -l - machine hangs after first file, if ls l.txt the file show only the first file "more" command, also hangs on some file. So there are very little things I can try. I recovered my virtual machine from yesterday and before yesterday, and they show the same behaviour, it hangs on commands (but yesterday they were working). There is no firewall on the machine, there is on the host though. I can connect with ftp but I can't download files nor list directory apart the user top directory... Working hard right now, any idea appreciated

  Read the article

• How can I specify custom folders for file-browsing in Metro Apps?

  - by klyonrad

  Whenever you use an Metro app and you want to import some files there is a little file browser. Like this: A lot of folders possible; however there is a folder that is very important: The personal Dropbox. How can I add this folder as a "favorite" in this view? Always browsing through the whole filesystem is slow in the Metro Interface. I realize I could make symlinks for all the typical Dropbox folders but that's simply annoying and there has to be another way (just like it's possible to "hack" the "Send To..." options for the context menu.

  Read the article

• Configuring memcached for a particular scenario

  - by pradeepchhetri

  I have a web application which queries opentsdb server(which in backend using Hbase cluster) for the datapoints of different metrics and using dygraph javascript graphing library, I am plotting those metrics. Since getting all the datapoints of past one day from opentsdb for a particular metric is itself taking nearly 2 seconds, my application which is plotting nearly 25 metrics is becoming very slow. In order to reduce this latency, I am thinking of using memcached module of php5 for caching all the queries. But I have few questions regarding memcached. Is there any way I can configure memcache to keep on updating its cache in the background by running some command line queries after particular interval of time. Is there any way I can configure memcache to always reply for a query using cache instead of first updating its cache because my application just plots datapoints for past one day. Missing out some datapoints is not that critical.

  Read the article

• How to install software packages on a Mac? (MacPorts, Fink, anything better?)

  - by Ben Alpert

  On my Mac OS X machine, how would you recommend I install command line software and other packages? I've been using MacPorts and it always seems quite slow, presumably because it has to compile the packages on-the-fly. I'd much prefer a package management system that has binary packages, saving me the need to compile things every time I want to download something new. I think Fink has binaries for some of the packages, but I usually see MacPorts recommended as the system to use. Which do you think works better and why? (Or is there another system that I haven't heard of?)

  Read the article

• DNS problems : correct nameserver, namserver working, but not resolving

  - by user1719624

  My problem is as follows. Any suggestions are welcome. [domain].org is not resolving whois and checking the registry information shows that the correct nameserver is set. The primary nameserver is also the server on which domain.org is hosted. The primary nameserver is also used for a number of other domains, and is working fine for those. Logging into the server, I can ping [domain].org and it resolves correctly. Setting the nameserver as my own DNS server on my laptop, and the URL resolves correctly. If the domain has the correct nameserver set, and the nameserver can resolve the URL to the correct IP address, and if I use the nameserver as my DNS then it resolves correctly, AND the nameserver is used for other domains which are resolving correctly, then why isn't it working? NB : this is a new domain registration and has been set up for around 10 days now, so it's not simple slow propagation. Any ideas? thanks

  Read the article

• Is 40+ Logons on Exchange 2003 per user normal?

  - by cbsch

  Hello! We've had a problem at work where users sometimes randomly can't connect to exchange. I've found out that it's because they reached the limit of 32 concurrent logons. I increased the maximum allowed connections by adding the key "Maximum Allowed Sessions Per User" in HKLM\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem. But I'm not sure if this is a real good fix. Looking at the logons some users has as many as 15 logons with the exact same logon time. I know for sure that Outlook 2007 does this, as I was watching them while a user connected with Outlook after a restart on the Exchange service. Every user also has an iPhone connected to exchange, I don't know if these cause the same thing. Is this normal? Could there be a bug in the software? (The Outlook 2007 has nothing configured, except added the user, pure vanilla installs). The users are mobile, and when Outlook generates up to 15 connection every time it connects, and I've read (no sources, sorry) that Outlook doesn't time out connections before 2 hours. I might have to set this number real high to prevent it from being a problem.

  Read the article

< Previous Page | 169 170 171 172 173 174 175 176 177 178 179 180  | Next Page >