Search Results

Search found 11897 results on 476 pages for 'dean rather'.

Page 174/476 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >

• CentOS 5 - Unable to resolve addresses for NFS mounts during boot

  - by sagi

  I have a few servers running CentOS 5.3, and am trying to get 2 NFS mount-points to mount automatically on boot. I added 2 lines similar to the following to fstab: server1:/path1 /path1 nfs soft 0 0 server2:/path2 /path2 nfs soft 0 0 When I run 'mount -a' manually, the mount points are properly mounted as expected. However, when I reboot the machine, only /path2 is mounted. For /path1 I get the following error: mount: can't get address for server1 It obviously looks like a DNS issue, but the record is properly configured in all the DNS servers and is mounted properly if I re-try the mount after the reboot is completed. I could properly fix this by using IP address instead of hostnames in /etc/fstab or adding server1 to /etc/hosts but I would rather not do that. What might be the reason for failing to resolve this specific address during boot time? Why the problem is only with the 1st mount point and the 2nd is properly mounted despite having identical configuration?

  Read the article

• How difficult will it be to switch DHCP from Windows 2000 to our network router?

  - by MetalSearGolid

  While I know a bit about networking, I am more of a programmer, and I have never set up a DHCP server. I have always allowed a router to assign IP addresses. However, my boss has asked me to switch out our old Win2k Domain Controller and DHCP server to a new server. The catch is that he wants to just use our router to assign IP addresses rather than have the new server do it. Is this going to be more than just disconnecting the old server? And if so, are there any documents or tips anyone can help me to make the transition a bit smoother? The new server will most likely have Windows Server 2008 R2. Any advice I can get on this matter would be greatly appreciated.

  Read the article

• Install Eclipse / StatET on Debian server for all users.

  - by Joris Meys

  I've manually downloaded, unpacked and installed the latest Eclipse (3.6.1) on a debian server (2.6.26-2-amd64). Eclipse can now be run by all users in our group, but when I tried to install the StatET plugin, I quickly found out that this one was only visible and useable for me. I have a sudo password on my account and a root password. I wondered if sudo eclipse was all I needed to do, but as I'm very new to the whole sysadmin thing (our old one is on "prolonged leave" and currently working in Spain) I rather check before blowing up the server. Any help on how to configure Eclipse for all users simultaneously is very much appreciated.

  Read the article

• Iphone 3GS to laptop Syncing

  - by Chris

  I use my Iphone calender to store all my appointments and customer information etc rather than my Outlook calender on my laptop most of the time. To the best of my knowledge I have never lost any info before, but after syncing the two devices today my calender is now empty on both. I had thought that syncing would mean taking the information on both devices, amalgamating it and populating both devices with the same info? Two questions: a) Is there anyway of retrieving the lost information? (or am I sunk?) b) Is there any way of averting such disaster in the future? Whilst I suspect that "Read the manual - Idiot!" would be the correct response, any help really is greatly appreciated!

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• How to bulk mail-enable contacts from AD in Exchange 2007?

  - by George Hewitt

  We have several thousand 'contacts' setup in AD already for a faxing system. We're migrating to an online fax provider that uses e-mail rather than plain old telephone. So, we've bulk edited all the AD records so that the 'mail' attribute is populated with the right e-mail address in the right format. Now, how do we enable these contacts within Exchange 2007? I've looked through http://technet.microsoft.com/en-us/library/bb684891.aspx but that only seems to talk about manually editing the CSV output to specify the external addresses. AD already knows the external e-mail addresses - I just need the info in Exchange! Any thoughts?

  Read the article

• Prevent elevation (UAC) for an application that doesn't need it.

  - by SealedSun

  Having recently migrated from Vista 32bit to Windows 7 64bit, one of my programs now requires admin rights. I use a rather exotic text editor (Crimson Editor). Although not designed for Vist/Win7 it worked well with Vista. But under Windows 7, the program executable gets this UAC shield added to its icon (even though the "Run as administrator" flag in the compatibility tab is not set) and prompts for elevation whenever I run it. How does Win7 determine that this notepad-like application needs admin rights? How can I override this false heuristic?

  Read the article

• Ubuntu Linux: Process swap memory and memory usage

  - by David Halter

  My Ubuntu eats more memory than the task manager is showing: sudo ps -e --format rss | awk 'BEGIN{c=0} {c+=$1} END{print c/1024}' 1043.84 free -m total used free shared buffers cached Mem: 3860 1878 1982 0 20 679 -/+ buffers/cache: 1178 2681 Swap: 2729 1035 1693 That's strange. Can someone explain this difference? But what is more important: I'd like to know how much memory a process is really using. I don't want to know the virtual memory size, but rather the resident memory plus swap of a process. I have also tried to output the format param "sz" of 'ps', but the sum of this is to high (5450 MB) (param 'size' gives 8323.45 MB). Are there any other options? I really want to use this, to determine which programs/processes are eating to much memory (and swap), to kill them, because hibernate might not be working if the swap partition is to little.

  Read the article

• Oracle Logical Standby redo generation

  - by DCookie

  Oracle 10.2.0.4 database with a logical standby on Win2K3. Recently a rather large delete operation was carried out on the production instance. I'm experiencing difficulty with the logical standby, in that it gets a couple of hundred (58M size) archive logs into the operation and the apply process fails with an out-of-memory error. Unfortunately, every time it fails it has to restart the apply from the beginning of the transaction. This is taking a couple of days each time. Anyway, in trying to resolve this problem, I've noticed that each archive log from the production system generates 5 or 6 log switches on the standby. I don't understand why this should be. Anyone have any ideas? A related question that I've not found the answer for: does anyone know if the logical standby must be running in archivelog mode? I really don't have a need to keep the logs.

  Read the article

• Horde on Debian: packages or upstream?

  - by fhd

  I'm currently using the Horde projects IMP, DIMP, MIMP, Ingo, Kronolith, Mnemo, Nag, Turba and Sork. I ignored the (rather outdated) Debian packages and installed the upstream versions. A few years later, my Horde installation is a bit outdated and I consider updating each project and each version individually a pain. The Debian stable packages are as outdated as ever, but squeeze will deliver reasonably current versions, so I'm considering switching to the Debian packages as soon as squeeze is released. What would you recommend for software packages like Horde? Using the upstream versions and manually updating or using the distribution's packages?

  Read the article

• Can I install Win 7 Pro with a Win 7 Home Premium disc?

  - by SeanJA

  So I got the 64bit Win 7 Pro disc from the Ultimate steal for cheap enough... but I found out that some stuff that I want to run (games mostly... since that is the only reason I keep Windows around...) did not do too well on the 64bit OS. So I have borrowed my friend's install disc, but it turns out that his is only Home Premium rather than Pro which I have a serial for. Can I still just run through the Home Premium install and use my Pro serial number (seems like I should be able to with the whole 'any time upgrade' deal)? Or do I have to go and find a 32bit pro disc to do the install? Are there any hoops that I have to jump through?

  Read the article

• How to let users change linux password from web browser?

  - by wag2639

  I'm not sure if this is a stackoverflow question or serverfault but here goes: I have an Ubuntu 10.04 file server (Samba/FTP/HTTP) and I would like to have the ability to give users the ability to change their password to the server using their web browser. I've written a similar script before using PHP and a mess of exec but I believe that isn't secure because it can be listened to by someone looking at the list of processes on the server. Is there some kind of plugin (PHP or Python or other) that can do this easily? I rather not use something like webmin as it's overkill for this.

  Read the article

• Is it possible to upload only files that have been updated into a server?

  - by kamikaze_pilot

  Hi guys, Suppose I have a server accessible via FTP and it hosts websites Suppose I want to edit the website locally so it wont affect the site live, and suppose I edit a whole bunch of files, and I don't want to deal with the hassle of keeping track of which files I've edited all the time... Once I finished editing I want to upload it to the server via FTP....is there some FTP software that automatically detects which files have been edited and have only those files uploaded and overwritten rather than having me manually choosing the files I've edited (and hence having to keep track of edited files) or have me upload the entire site which is a waste of time thanks in advance

  Read the article

• Certain drives in RAID 5 set intermittently are not recognized

  - by hydroparadise

  I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

  Read the article

• "killed" message from cron.daily, but not when run from command line

  - by Dan Stahlke

  On Fedora 17, I put a file into /etc/cron.daily with the following contents: cd / su dstahlke /home/dstahlke/bin/anacron-daily.sh exit 0 For some reason, I get a mail every day that just says /etc/cron.daily/dstahlke-daily: ...killed. I tried with and without the exit 0 line above (I noticed that some system scripts have that and others don't, I'm not sure of the purpose). Running /etc/cron.daily/dstahlke-daily from the command line as root produces no ...killed message. Other than the message, everything seems to work fine. Putting set -x in the above script, as well as in the /home/dstahlke/bin/anacron-daily.sh script shows that the ...killed message happens just after the latter script terminates (or perhaps just after the su command finishes). What causes the ...killed message? Or, is there a more acceptable way to have anacron run a user script daily? I figured that putting this in /etc/cron.daily would help the system coordinate all of the daily tasks rather than potentially running my task concurrently with the system tasks.

  Read the article

• Connecting to localhost with smartphone: possible?

  - by Arturas Molcanovas

  I am currently developing a mobile PHP project on localhost (or, to be more precise, a locally hosted website reachable at http://azgoth/) on my desktop computer and wish to check out how the design looks on my phone's various browsers, however, since the project's actually in my computer rather than the public net, I am unable to do so. Both my Desktop computer and smartphone connect to the internet via the same router, so I wondered, would it be possible to somehow make http://azgoth/ accessible to my smartphone in a similar way that my desktop computer accesses it, without making it public for everyone to see? OS: Windows XP SP 3 Service: Apache HTTPD Router: D-Link DIR-300 FTP Directory

  Read the article

• I have to shard a mysql database. I want to start with 12 shards on 2 machines. What is the best w

  - by Tim

  All tables are InnoDb. I would rather not use mysqldump, because the shard sizes will be about 200 GB (about 700 million rows), and that will take too long. I was hoping to just stop mysql for an hour, copy the data files to a new machine, and start back up. But you can't do this with InnoDb, as some data is in the shared tablespace. Even if I have the innodb_file_per_table option set. This is not a website, but a custom application, used by tens of thousands right now, so uptime and performance are important. I suppose I could add logic into my server application to allow for gradual rebalancing / moving of a shard. Does anyone have a better idea?

  Read the article

• How to fix 0x800CCC0E Error Codes?

  - by greenber

  I recently started receiving the above-mentioned error which is apparently a Winsock error message it is preventing me from checking my e-mail with Gmail, although there is no problem with my e-mail was ATT e-mail and MSN mail. I found a number of supposed fixit programs which found a great number of errors in my registry (although Wyse and Glary did not find anything wrong with my registry?) And offered to fix them for a fee. I would much rather not pay! :-) Does anybody here know what is causing this error and how to fix it? oh – I am using Windows 7/ultimate and Live Mail as my e-mail reader. Thank you. Ross

  Read the article

• Improve performance on Lync desktop sharing

  - by Trikks

  I'm using Lync 2010 server to handle some clients communication and screen sharing. The biggest issue is the performance with screen sharing, it is of rather high quality but the frame rate is very poor. I have been reading and searching a lot on the subject and 95% of all topics is about bandwidth, we have a 200/200 MBit Internet connection solely for this application. Also my test machines runs on an internal gigabit lan. The speeds between all boxes is hysterically fast. Next step was to ensure that there where some profiles for different bandwidths, so i registered some New-CsNetworkBandwidthPolicyProfile -Identity 50Mb_Link -Description "BW profile for 50Mb links" -AudioBWLimit 20000 -AudioBWSessionLimit 200 -VideoBWLimit 14000 -VideoBWSessionLimit 700 New-CsNetworkBandwidthPolicyProfile -Identity 100Mb_Link -Description "BW profile for 100Mb links" -AudioBWLimit 30000 -AudioBWSessionLimit 300 -VideoBWLimit 25000 -VideoBWSessionLimit 1500 Nothing fancy happend here either. Non of the test boxes have anything from Norton installed, they doesn't have any firewalls running (nor does the Lync server), all fences are down in this environment just for the testing. Is there any thing that I may have missed to improve the quality of this? Thanks

  Read the article

• How to configure Linux to act as a Bluetooth RFCOMM SPP server?

  - by regulatre

  I'm writing a phone app for Android that connects to a bluetooth RFCOMM device in my car. My phone app talks AT commands with it. For development work, I often need to communicate with the device to try different commands and things. My neighbors are starting to think I'm weird because I sit in my car for hours on end with my laptop screen shining on my face, typing away like a script kiddie. I'd much rather configure one of my many Linux servers to act as a bluetooth RFCOMM device and allow me to connect to it (indoors, while I sit on my couch). I imagine I have to start with something like sdptool add SP But then what? I'm perfectly happy writing a perl app to handle the I/O, but I just don't know how to make the bluez stack accept connections and subsequently pipe that stream to a perl app.

  Read the article

• Sync Banshee library data.

  - by Dom

  I use Banshee to organise my music, I particularly like its scoring system and I have smart playlists based on it. However, I have two versions of my music library, one on each of my computers. As one of the computers is small I only have a favourite set of songs on that computer rather than my whole collection. The computers are not on a local network, but I do use Ubuntu One for file sharing between them. Is there any way I can synchronise song data (play count, score, skip count ...) and playlist data (including smart playlists that include songs based on this data) between the two computers? This would only be relevant of course for the songs that exist on both computers, the songs that exist on only one would need to be ignored. I did consider putting the library data file (I think it is .xml but I'm not sure) into the shared file and creating a symbolic link to it, but then I wouldn't be able to have a different set of songs on each computer. Thank you.

  Read the article

• What router settings to use for wireless home network

  - by Question Overflow

  While looking at the setting of my wireless router, I am bewildered by the array of options available. Despite searching on Wikipedia to try to understand the various acronyms, I am still clueless to decide what is the best setting to use although the default works fine. Rather than calling the internet service provider (ISP) to ask them the correct settings, I hope to learn more about the differences between some of the options listed below, so that I would be able to make a more informed decision from now onwards: PPPoE vs PPPoA LLC vs VC-Mux Bridge vs Routed In addition, I would also like to know the significance of the following MTU VPI VCI And whether or when I should manually specify DNS?

  Read the article

• Windows7 home 64bit + Outlook 2010, multiple non-concurrent users

  - by Jim Taylor

  We have one windows computer shared by eight people. I have set up separate login accounts for each user. One account has administrative privileges, the others are standard users. We installed Outlook 2010 with the intention that each user could access their own email separately, without seeing the mail of other users. This has not worked as we intended. When the administrator logs in to each standard user account and starts the outlook mail setup, he is prompted for the administrative password, and then sets up the mail account. When accessing the outlook mail program after setup, each mail account shows as a separate tab in a communal inbox, rather than a separate mail box for each user. How would we accomplish the desired separation of Outlook mail accounts? Thanks for your advice Jim T.

  Read the article

• How to use Cambria as basic font when math symbols are needed?

  - by Jukka K. Korpela

  I first thought one could use Cambria for copy text (in Word), switching to Cambria Math only when needed (when a character is needed that is not present in Cambria). This does not seem to work that well. For example, if I need the minus-or-plus sign “±”, I cannot take it from Cambria, but if I use it from Cambria Math, it has a shape rather different from the style of “±”, “+”, and “–” in the text, if it is written in Cambria. Similarly, the multiplication sign “×” is much larger in Cambria Math than in Cambria. The obvious solution would be to use Cambria Math as copy text font, for uniformity. But Cambria Math lacks italic and bold. (Word’s formula editor uses Cambria Math by default and can do italic and bold, but it gets them from Plane 1 – they are special mathematic italic and mathematic bold characters, not italic and bold glyphs for normal characters.) Is there any better approach than using Cambria Math for copy text and switching to Cambria when italic or bold is needed?

  Read the article

• What is a good router linux distro and WHY?

  - by madmaze

  I have a rather large home network with many clients. Ive decided I want to build a Linux based router, I have an 1.6Ghz dual-core(atom) system kicking around which will be re-purposed. So ive looked at a bunch of specific router distros but cant decide. I have also looked into taking a Ubuntu server or FreeBSD install and adding needed packages. So question is, what is the best router-Linux or base Linux distro and why? resources appreciated.

  Read the article

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181  | Next Page >