ubuntu one api - Page 174

What is the best API in any language for Audio and MIDI music application development?

- by noneme

What, in your opinion, is the best API to utilize in developing an application that handles both realtime MIDI and audio input and output? This would be for an application that is used in the process of making music as opposed to playing audio or MIDI files. I'm aware that this may be a subjective question, but if you know of an API that is dominantly used for these purposes, please share it. I'm agnostic about which language the API is for, and I also don't care about portability. The real concern is for an API that is well documented, well designed (e.g. thought out and intuitive to developers using it), and actively maintained. OS portability would be nice, but it is second to having an API/Language that meets the previous requirements. Please note that the emphasis is not on API's for sound synthesis or for composing music with code. It is intended for the handling of sound file and MIDI data in a real-time context.

Read the article

Google Maps API - Marker not showing

- by popnbrown

I'm trying to add markers for every single row from a table, that sits on the page. The page is http://www.sravanks.com/first/2013ftcmap.php This is the JS code that's loading the markers: $(document).ready(function() { var mapOptions = { center: new google.maps.LatLng(39.740, -89.503), zoom: 7 }; var map = new google.maps.Map(document.getElementById("map-canvas"), mapOptions); var infowindow = new google.maps.InfoWindow(); /* City Markers */ var cityCircle = new Array(); var i = 0; $.each($('.events tr'), function(index, value) { var name = $(this).find('td:first()').html(); var address = $(this).find('.address').html(); var linkUrl = "http://www.sravanks.com/first/geocode.php?address=" + address; $.ajax({ url: linkUrl }).done(function(data){ var json = $.parseJSON(data.substring(0, data.length-1)); lat = json.results[0].geometry.location.lat; lng = json.results[0].geometry.location.lng; var latlng = new google.maps.LatLng(lat, lng); var marker = new google.maps.Marker({ position: latlng, map: map, icon: 'map-pointer-medium.gif' }); google.maps.event.addListener(marker, 'click', function() { infowindow.setContent(name); infowindow.open(map, marker); cityCircle[i] = new google.maps.Circle({strokeColor: '#00FF00', strokeOpacity: 0.8, strokeWeight: 2, fillColor: '#00FF00', fillOpacity: 0.35, map: map, center: latlng, radius: 144841}); i++; }); }); }); /*Team Markers*/ var markers = {}; var teamName, teamNumber, lat, lng, content; $.each($('.list tr'), function(index, value) { teamName = $(this).find('td.name').html(); teamNumber = $(this).find('td.number').html(); markers[teamNumber] = {}; lat = parseFloat($(this).find('td.lat').html()); lng = parseFloat($(this).find('td.lng').html()); content = "Name: " + teamName + "<br />Number: " + teamNumber; markers[teamNumber]['latlng'] = new google.maps.LatLng(lat, lng); markers[teamNumber]['marker'] = new google.maps.Marker({ position: markers[teamNumber]['latlng'], map: map }); google.maps.event.addListener(markers[teamNumber]['marker'], 'click', function() { infowindow.setContent(content); infowindow.open(map, markers[teamNumber]['marker']); }); }); google.maps.event.addListener(infowindow, 'closeclick', function() { for(var i=0;i<cityCircle.length;i++){ cityCircle[i].setMap(null); } }); }); I've got no errors, but the Team Markers do not show up. The strange thing is that the City Markers do show up. Some more info, the City Markers ajax call is just to a proxy that calls the google geocoding api. Again the link's at http://www.sravanks.com/first/2013ftcmap.php

Read the article

Many-to-one relationship in SQLAlchemy

- by Arrieta

This is a beginner-level question. I have a catalog of mtypes: mtype_id name 1 'mtype1' 2 'mtype2' [etc] and a catalog of Objects, which must have an associated mtype: obj_id mtype_id name 1 1 'obj1' 2 1 'obj2' 3 2 'obj3' [etc] I am trying to do this in SQLAlchemy by creating the following schemas: mtypes_table = Table('mtypes', metadata, Column('mtype_id', Integer, primary_key=True), Column('name', String(50), nullable=False, unique=True), ) objs_table = Table('objects', metadata, Column('obj_id', Integer, primary_key=True), Column('mtype_id', None, ForeignKey('mtypes.mtype_id')), Column('name', String(50), nullable=False, unique=True), ) mapper(MType, mtypes_table) mapper(MyObject, objs_table, properties={'mtype':Relationship(MType, backref='objs', cascade="all, delete-orphan")} ) When I try to add a simple element like: mtype1 = MType('mtype1') obj1 = MyObject('obj1') obj1.mtype=mtype1 session.add(obj1) I get the error: AttributeError: 'NoneType' object has no attribute 'cascade_iterator' Any ideas?

Read the article

Google maps api v3: geocoding multiple addresses and infowindow

- by user2536786

I am trying to get infowindow for multiple addresses. Its creating markers but when I click on markers, infowindow is not popping up. Please help and see what could be wrong in this code. Rest all info is fine only issue is with infowindow not coming up. <!DOCTYPE html> <html> <head> <meta http-equiv="content-type" content="text/html; charset=UTF-8" /> <title>Google Maps Multiple Markers</title> <script src="http://maps.google.com/maps/api/js?sensor=false" type="text/javascript"></script> </head> <body> <div id="map" style="height: 800px;"></div> <script type="text/javascript"> var locations = [ ['Bondi Beach', '850 Bay st 04 Toronto, Ont'], ['Coogee Beach', '932 Bay Street, Toronto, ON M5S 1B1'], ['Cronulla Beach', '61 Town Centre Court, Toronto, ON M1P'], ['Manly Beach', '832 Bay Street, Toronto, ON M5S 1B1'], ['Maroubra Beach', '606 New Toronto Street, Toronto, ON M8V 2E8'] ]; var map = new google.maps.Map(document.getElementById('map'), { zoom: 10, center: new google.maps.LatLng(43.253205,-80.480347), mapTypeId: google.maps.MapTypeId.ROADMAP }); var infowindow = new google.maps.InfoWindow(); var geocoder = new google.maps.Geocoder(); var marker, i; for (i = 0; i < locations.length; i++) { geocoder.geocode( { 'address': locations[i][1]}, function(results, status) { //alert(status); if (status == google.maps.GeocoderStatus.OK) { //alert(results[0].geometry.location); map.setCenter(results[0].geometry.location); marker = new google.maps.Marker({ position: results[0].geometry.location, map: map }); google.maps.event.addListener(marker, 'mouseover', function() { infowindow.open(marker, map);}); google.maps.event.addListener(marker, 'mouseout', function() { infowindow.close();}); } else { alert("some problem in geocode" + status); } }); } </script> </body> </html>

Read the article

Store latitudes and longitudes in database for proximity/radius search using Google Maps API, .NET a

- by poojad

What is the approach for storing the latitudes and longitudes for multiple addresses as a one time set up. I need to find the nearby stores using Google Maps and I have to get the latitudes and longitudes of all the available stores. As the data is huge and may increase or change in future, can anyone suggest an approach taking performance and maintenance into consideration. Thank you.

Read the article

twitter api post rate limit

- by Xavier

Does anyone know Twitter's rate limit on posting? Looking at their web page they claimed to not have one but I get an exception thrown if my program posts too fast... Any help is appreciated.

Read the article

Chroot into a 32 bit version of ubuntu from a 64 bit host

- by Leif Andersen

I have a piece of software that only runs on 32 bit linux (Xilinx webPack 10.1, apperently it 'has' to be the old version because that's the latest one compatible with their boards), anyway, this version is only compatible with 32 bit linux. So, I head off to this page to see what I can do: https://help.ubuntu.com/community/32bit_and_64bit Of the 4 options (listed at the bottom): I already installed ia32-libs, and it's still not working I could do that one if needed (which I ended up doing). No, I don't want to be working from a vm all of next semester, that would be painful and I'd rather just reinstall my whole computer to a 32 bit os (which I don't want to do). It didn't sound like it was the best option based on what I've seen. So I went off to do #2, and set up a chroot for 32 bit ubuntu. It linked to this tutorial: https://help.ubuntu.com/community/DebootstrapChroot As I'm running ubuntu 10.10 I made the lucid and newer version changes. Which is to say I wrote: [hardy-i386] description=Ubuntu 8.04 Hardy for i386 directory=/srv/chroot/hardy-i386 personality=linux32 root-users=leif type=directory users=leif to /etc/schroot/chroot.d/hardy-i386 (Note though that I did save it once before I had the file properly formatted, I saved the correct version moments later though). I then ran: $ sudo mkdir -p /srv/chroot/hardy_i386 $ sudo debootstrap --variant=buildd --arch i386 hardy /srv/chroot/hardy_i386 http://archive.ubuntu.com/ubuntu/ Then I ran: $ schroot -l And it showed the proper chroot, but then when I ran: $ schroot -c hardy-i386 -u root I got the following error: E: 10mount: error: Directory '/srv/chroot/hardy-i386' does not exist E: 10mount: warning: Mount location /var/lib/schroot/mount/hardy-i386-80359697-2164-4b10-a05a-89b0f497c4f1 no longer exists; skipping unmount E: hardy-i386-80359697-2164-4b10-a05a-89b0f497c4f1: Chroot setup failed: stage=setup-start Can anyone help me figure out what the problem is? Oh, by the way: /srv/chroot/hardy-i386 most certainly exists. I've also tried it replacing all references with hardy to lucid, to no avail. Oh, one more thing, I did set up the chrome os environment a month back or so: http://www.chromium.org/chromium-os/developer-guide and it had me use something with chmod. So, can anyone figure out what the problem is? Thank you.

Read the article

Grub2 -- Dualboot Ubuntu LTS 12.04 and Windows 7 -- Detects two Windows 7 (loader) entries

- by DarkIron112

this is the first question I have ever asked the Ubuntu Community. :D I'm fairly new to Ubuntu, but I understand the basics and know how to navigate the Terminal. I also know how to ask for/research my problems before asking for/ help. I have scoured the internet high and low and learned much of how Grub2 works. But nothing has helped me to solve my problem. My problem is this: I have a computer that has three hard drives. It previously had Windows XP, but I upgraded to Windows 7. I also installed Ubuntu 12.04 LTS (Precise Pangolin). During my installation of Windows 7, there was a failure and I had to restart the installation. Afterwards, I installed Ubuntu. After some trouble removing all traces of the XP OS (Ubuntu auto-detected it, but not Windows 7) I got the two OSes working flawlessly. Or, almost. When booting up, Grub2 used to display Ubuntu, Ubuntu Recovery Mode, Other Versions of Linux, memtest, followed by "Windows 7 (loader) on /dev/sda1" and "Windows 7 (loader) on /dev/sdb1". I eventually removed Recovery Mode, Other Versions, and Memtest. Now, when I run: sudo update-grub I get this print-out: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sdb1 I would like to remove "Windows 7 (loader) on /dev/sda1", as it is a broken entry that shouldn't exist, and must have been installed during my first Windows 7 attempt. I cannot find a Windows 7 entry in /etc/grub.d... And I don't know where to look. Here is a layout of my hard drives: /dev/sda1/ (1.82 TiB), NTFS ("Media") /dev/sdb1/ (100 Mib), NTFS ("System Reserved") /dev/sdb2/ (149 GiB), NTFS ("Windows 7") /dev/sdb3/ (149 GiB), Extended (" ") /dev/sdb4/ (145 GiB), ext4 (" ") /dev/sdb5/ (4 GiB), linux-swap (" ") /dev/sdc1/ (488.28 GiB), NTFS ("Downloads") /dev/sdc2/ (488.28 GiB), NTFS ("AltMedia") /dev/sdc3/ (886.45 GiB), NTFS ("Personal") unallocated (2.09 MiB), unallocated What I think has happened: Windows 7 installed first and badly. I installed it again. First, there was Windows XP to guide where the bootloader went to so it was put on /dev/sdb1/. But, the second time no such guide existed so the machine put another bootloader on /dev/sda1/. sda1, by the way, is the only partition on a 2TB drive. No boot record partition appears to exist according to gedit. I'm not sure where Grub2 is getting this information from. But, there it is. Is there anything somebody can do to help me? Or, is there any more information I should add? Thank you, community!

Read the article

It's like I'm in recovery mode after update, but I'm not

- by mawburn

I used the Ubuntu software updater and updated to the most recent packages. After the last update today, it's like I have gone into recovery mode, but I haven't. I am running UbuntuGNOME First, everything looks like this: Switching to dark mode does nothing. Also, default applications do not work. Such as Startup and the default screenshot application. Everything was working fine before the latest software update. System Info Ubuntu 14.04 LTS Gnome-Shell 3.10.4 Kernel 3.13.0-29 I can't figure out how to get an update history, but this is almost a fresh install. It's about a week old install and this is the 3rd time I've used the Ubuntu Software Update. I am running AMD ATI HD6700 with the proprietary Catalyst drivers. I tried to provide all information that I thought would be useful, if you need any more please let me know. Edit - I believe something went wrong within these updates: Update Log: Start-Date: 2014-06-09 19:07:07 Commandline: aptdaemon role='role-commit-packages' sender=':1.68' Install: libgnome-desktop-3-10:amd64 (3.12.0-0~eugenesan~trusty2) Upgrade: gnome-session-common:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gnome-session-bin:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), gir1.2-gnomedesktop-3.0:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), gnome-session:amd64 (3.9.90-0ubuntu12, 3.12.0-0~eugenesan~trusty10), python-libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libspice-server1:amd64 (0.12.4-0nocelt2, 0.12.4-0nocelt2.02~eugenesan~trusty1), gir1.2-mutter-3.0:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), xserver-xorg-video-qxl:amd64 (0.1.1-0ubuntu3, 0.1.1-0ubuntu3.01), libxml2:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libxml2:i386 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), gnome-desktop3-data:amd64 (3.8.4-0ubuntu3, 3.12.0-0~eugenesan~trusty2), mutter:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), mutter-common:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1), libxml2-utils:amd64 (2.9.1+dfsg1-3ubuntu4.1, 2.9.1+dfsg1-3ubuntu4.2), libmutter0c:amd64 (3.10.4-0ubuntu2, 3.10.4-0ubuntu2.1) End-Date: 2014-06-09 19:07:12 I also installed Citrix Receiver today, following the tutorial here: Citrix Receiver 12.1 on Ubuntu 14.04 64-bit Log Start-Date: 2014-06-09 18:59:06 Commandline: apt-get install libmotif4:i386 nspluginwrapper lib32z1 libc6-i386 libxp6:i386 libxpm4:i386 libasound2:i386 Install: libmotif-common:amd64 (2.3.4-5, automatic), libatk1.0-0:i386 (2.10.0-2ubuntu2, automatic), libxft2:i386 (2.3.1-2, automatic), libgraphite2-3:i386 (1.2.4-1ubuntu1, automatic), nspluginviewer:i386 (1.4.4-0ubuntu5, automatic), libpango-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcursor1:i386 (1.1.14-1, automatic), libmotif4:i386 (2.3.4-5), libxm4:amd64 (2.3.4-5, automatic), libxm4:i386 (2.3.4-5, automatic), libxp6:i386 (1.0.2-1ubuntu1), libpangocairo-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libxcb-render0:i386 (1.10-2ubuntu1, automatic), libthai0:i386 (0.1.20-3, automatic), libharfbuzz0b:i386 (0.9.27-1, automatic), libpixman-1-0:i386 (0.30.2-2ubuntu1, automatic), libpangoft2-1.0-0:i386 (1.36.3-1ubuntu1, automatic), libcairo2:i386 (1.13.0~20140204-0ubuntu1, automatic), lib32z1:amd64 (1.2.8.dfsg-1ubuntu1), libjasper1:i386 (1.900.1-14ubuntu3, automatic), libgtk2.0-0:i386 (2.24.23-0ubuntu1.1, automatic), nspluginwrapper:amd64 (1.4.4-0ubuntu5), libuil4:amd64 (2.3.4-5, automatic), libuil4:i386 (2.3.4-5, automatic), libxcb-shm0:i386 (1.10-2ubuntu1, automatic), libxmu6:i386 (1.1.1-1, automatic), libc6-i386:amd64 (2.19-0ubuntu6), libxinerama1:i386 (1.1.3-1, automatic), libgdk-pixbuf2.0-0:i386 (2.30.7-0ubuntu1, automatic), libxcomposite1:i386 (0.4.4-1, automatic), libmrm4:amd64 (2.3.4-5, automatic), libmrm4:i386 (2.3.4-5, automatic), libdatrie1:i386 (0.2.8-1, automatic), libxrandr2:i386 (1.4.2-1, automatic), libxpm4:i386 (3.5.10-1) End-Date: 2014-06-09 18:59:11

Read the article

Live-Ubuntu 12.04 ran fine, now stopped booting!

- by user89743

I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

Read the article

Dual booting windows 8/ubuntu 12.04. Grub doesn't appear and machine never boot in ubuntu

- by black sensei

i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance

Read the article

WiFi on Ubuntu 12.04 custom: downloading unbearably slow

- by Mark

iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

Read the article

jQuery: Inserting li items one by one?

- by Legend

I wrote the following (part of a jQuery plugin) to insert a set of items from a JSON object into a <ul> element. ... query: function() { ... $.ajax({ url: fetchURL, type: 'GET', dataType: 'jsonp', timeout: 5000, error: function() { self.html("Network Error"); }, success: function(json) { //Process JSON $.each(json.results, function(i, item) { $("<li></li>") .html(mHTML) .attr('id', "div_li"+i) .attr('class', "divliclass") .prependTo("#" + "div_ul"); $(slotname + "div_li" + i).hide(); $(slotname + "div_li" + i).show("slow") } } }); } }); }, ... Doing this maybe adding the <li> items one by one theoretically but when I load the page, everything shows up instantaneously. Instead, is there an efficient way to make them appear one by one more slowly? I'll explain with a small example: If I have 3 items, this code is making all the 3 items appear instantaneously (at least to my eyes). I want something like 1 fades in, then 2 fades in, then 3 (something like a newsticker perhaps). Anyone has a suggestion?

Read the article

Unable to sync files not located in the Ubuntu One folder

- by pst007x

I have the option to sync files in nautilus, however when the option is selected nothing happens. I am able to SLOWLY sync files in the Ubuntu One folder (unless in sub-folders), but only there. Why give the option if it does not work? This really is still beta, so to charge for this service is terrible. I am a little frustrated at the moment, I have tried all sorts; removing accounts to a fresh Ubuntu install! I am at a loss :-( Can anyone else sync files outside the Ubuntu One folder, if so how? Thanks

Read the article

Ubuntuone fails to sync with 'File Sync starting...' displayed

- by a different ben

I am on 12.04 using ubuntuone-client 3.0.1-0ubuntu1.0.1. I actually have two machines that I sync with, having the same Ubuntu version and ubuntuone-client version. One is fine, the other is not. File sync has frozen within a user-defined folder under my home folder. The graphical client reports in the top-right corner: 'File Sync starting...', but this doesn't change. I have two files with changes that show a syncing overlay in Nautilus. They are both very small text files. Here are some details: harb@joan:~$ u1sdtool --status State: READY connection: With User Not Network description: ready to connect is_connected: False is_error: False is_online: False queues: WORKING harb@joan:~$ u1sdtool --current-transfers Current uploads: 0 Current downloads: 0 The status seems to suggest that I am not connected to a network, however I am connected to a network - in fact I am accessing this machine via NX. Is it not working because I am connected via NX? Happy to provide other info, just not sure what would be useful.

Read the article

WebSocket API 1.1 released!

- by Pavel Bucek

Its my please to announce that JSR 356 – Java API for WebSocket maintenance release ballot vote finished with majority of “yes” votes (actually, only one eligible voter did not vote, all other votes were “yeses”). New release is maintenance release and it addresses only one issue: WEBSOCKET_SPEC-226. What changed in the 1.1? Version 1.1 is fully backwards compatible with version 1.0, there are only two methods added to javax.websocket.Session: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * @param clazz type of the message processed by message handler to be registered. * @param handler whole message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native * websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Whole<T> handler); /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * * @param clazz type of the message processed by message handler to be registered. * @param handler partial message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native * websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Partial<T> handler); Why do we need to add those methods? Short and not precise version: to support Lambda expressions as MessageHandlers. Longer and slightly more precise explanation: old Session#addMessageHandler method (which is still there and works as it worked till now) does rely on getting the generic parameter during the runtime, which is not (always) possible. The unfortunate part is that it works for some common cases and the expert group did not catch this issue before 1.0 release because of that. The issue is really clearly visible when Lambdas are used as message handlers: 1 2 3 session.addMessageHandler(message -> { System.out.println("### Received: " + message); }); There is no way for the JSR 356 implementation to get the type of the used Lambda expression, thus this call will always result in an exception. Since all modern IDEs do recommend to use Lambda expressions when possible and MessageHandler interfaces are single method interfaces, it basically just scream “use Lambdas” all over the place but when you do that, the application will fail during runtime. Only solution we currently have is to explicitly provide the type of registered MessageHandler. (There might be another sometime in the future when generic type reification is introduced, but that is not going to happen soon enough). So the example above will then be: 1 2 3 session.addMessageHandler(String.class, message -> { System.out.println("### Received: " + message); }); and voila, it works. There are some limitations – you cannot do 1 List<String>.class , so you will need to encapsulate these types when you want to use them in MessageHandler implementation (something like “class MyType extends ArrayList<String>”). There is no better way how to solve this issue, because Java currently does not provide good way how to describe generic types. The api itself is available on maven central, look for javax.websocket:javax.websocket-api:1.1. The reference implementation is project Tyrus, which implements WebSocket API 1.1 from version 1.8.

Read the article

Evolution has no access to couchdb

- by berkes

Evolution gives the error "Cannot open addressbook". "We were unable to open this addressbook. This either means you have entered an incorrect URI, or the server is unreachable". "Details: Operation not permitted". (rough translation from Dutch). Enabling verbose logging in (desktop)couchdb tells me roughly the same: [info] [<0.7875.1>] 127.0.0.1 - - 'PUT' /contacts/ 400 [debug] [<0.7875.1>] httpd 400 error response: {"error":"invalid_consumer","reason":"Invalid consumer (key or signature method)."} It seems that evolution tries to fetch the contacts, then couchdb denies access, and then evolution fails to do a proper oauth. This is on Ubuntu 10.10, with its default dektopcouch 1.0.1. Any hints on where to start would be most appreciated :)

Read the article

My ubuntuone is broken, what is the problem?

- by user6962

I am on 10.10 and u1sdtool seems to be completely broken. I reinstalled it, no change. I can add my PC to the account, but it is added twice(!) every time I tried. So I have my netbook and two times my PC in the account. The netbook with 10.04 has no problems. Below is the error msg I get when attempting to startup Ubuntu One on the command line. desktop:~$ u1sdtool --status Oops, an error ocurred: Traceback (most recent call last): Failure: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. desktop:~$ Starting it from the Me Menu has the same effect, the HDD will get really busy for a minute and then nothing happens, the client will not start. Nothing in the syslog or anywhere.

Read the article

How to merge multiple internet connections into one

- by Luis Alvarado

My PC has 2 wired cards. Both gigalan. It also has 2 wireless cards. One broadcom with proprietary drivers and ralink with open software (which works much better than broadcom). My cellphone can share its connection wirelessly to my PC. But I also have a wired connection. So I have multiple connections that I can use to have internet. How can I merge 2 or more connections together and balance them to enjoy one unified internet experience that it is the sum of all internet connections connected to it. For example if I have an internet connection that offers 1024KB/Sec and another that offers 512KB/Sec and one small one that offers 128KB/Sec, after load balancing and merging all connections, I could download at a speed of 1664KB/Sec using all 3 internet connections as one for example. This question has always intrigued me.

Read the article

how to fix error when authenticating in U1

- by Yann

Like other users, when authenticating in U1 I get this error: Method "CreateItem" with signature "a{sv}(oayay)b" on interface "org.freedesktop.Secret.Collection" doesn't exist. And in /var/log/auth.log: gnome-keyring-daemon[4793]: egg_symkey_generate_simple: assertion `iterations >= 1' failed gnome-keyring-daemon[4793]: couldn't prepare to write out keyring: /home/yann/.gnome2/keyrings/login_1.keyring So I tried to move "login.keyring". I typed no password for the security when logging into U1, accepted non secured way to save passwords. And a message told me the operation successfully completed (in French). But, sync did not work. And u1sdtool --status returned this: State: AUTH_FAILED connection: With User With Network description: auth failed is_connected: False is_error: True is_online: False queues: WORKING I'm sorry U1 doesn't work anymore; it was really useful to me. Can you help me ? Ubuntu 11.10

Read the article

Does saving my progress on a U1-synced file/folder put unneccesary strain on the servers?

- by Chauncellor

I love Ubuntu One and I use it all the time. I have my documents and music composition folders set to sync. It's been a real boon. However, sometimes I feel that constantly saving my progress forces the file to sync dozens and dozens of times to the servers. It seems wasteful to me so I've been disconnecting U1 until I'm finished working on a project. Is this an unnecessary action that I am taking? I know it's using Amazon's storage but I'm still paranoid that I'm costing Canonical money when I constantly save my progress.

Read the article

Ubuntu One Files for Android will not let me log in

- by user20867

I installed Ubuntu One Files on my Nexus One phone. When I tap Log in on the main screen, the app tries to log in then after a few seconds returns the following message: Log-in failed, please try again later. I have an Ubuntu One account, and when I tap Register on the main screen for Ubuntu One Files, I can log in using my phone's Web browser. But if I go back to the app and try to log in, I get the same error. Again, my phone is a Nexus One running Android 2.3.4. The phone is not rooted or modded in any way.

Read the article

Lyrics on mp3 ID-tag

- by puchrojo

Since a few years ago I stopped listening to CDs and began to listen to mp3 only. At the begining I continued to buy the CDs to support the artist, but later I started to buy the album direct online as mp3. The problem is, that by this, I don't have the lyrics for the songs. For the "commercial" or popular music it is not a big problem, but for others there are no lyrics on the Internet. How can I make use of the ID3-tag for the lyrics? Is there a music store that adds lyrics to the mp3 files sold? Can this be done with Ubuntu One? Another alternative would be to have an Internet lyrics databases like musixmatch.com supported.

Read the article

About my main Project

- by user207365

My project is to build a AI(Artificial Intelligence) system in which i am planning to have a raspberry pi or Intel i3/i5 processor. Raspberry pi is small and efficient but i don't know whether it can support 2 TB or more external hard disk. Where as in Intel i can have internal hard disk and at the same time external also and will be more faster with 2gb or 4gb RAM. Which is better Raspberry pi or Intel,is it possible to stimulate my ubuntu in Intel processor. the main reason using processor it to give the system decision making capability ,understanding and analyzing capabilities using different algorithm's .my processor should analyze the condition take proper steps in running the appropriate application

Read the article

Google maps api v3 refreshing away markers

- by Paul Peelen

Hi, I am having problems with the google maps API V3. It seems that every time I load my page the maps load (including the markers) and then it does a quick reload and removes all the markers. Am I missing somehting? What am I doing wrong? Here is an example: http://www.PaulPeelen.com/wp-content/uploads/2010/04/SafariScreenSnapz001.mov this is my code: <script type="text/javascript">  </script> I hope somebody can help me. Best regards, Paul Peelen

Search Results

Search found 124254 results on 4971 pages for 'ubuntu one api'.

Page 174/4971 | < Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181 | Next Page >

- by noneme

- by popnbrown

- by Arrieta

- by user2536786

- by poojad

- by Xavier

- by Leif Andersen

- by DarkIron112

- by mawburn

- by user89743

- by black sensei

- by Mark

- by Legend

- by pst007x

- by a different ben

- by Pavel Bucek

- by berkes

- by user6962

- by Luis Alvarado

- by Yann

- by Chauncellor

- by user20867

- by puchrojo

- by user207365

- by Paul Peelen

< Previous Page | 170 171 172 173 174 175 176 177 178 179 180 181 | Next Page >