Search Results

Search found 4946 results on 198 pages for 'proper benchmarking'.

Page 175/198 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• DB2 Integrity Checks and Exception Tables

  - by imthefirestartr

  I am working on planning a migration of a DB2 8.1 database from a horrible IBM encoding to UTF-8 to support further languages etc. I am encountering an issue that I am stuck on. A few notes on this migration: We are using db2move to export and load the data and db2look to get the details fo the database (tablespaces, tables, keys etc). We found the loading process worked nicely with db2move import, however, the data takes 7 hours to load and this was unacceptable downtime when we actually complete the conversion on the main database. We are now using db2move load, which is much faster as it seems to simply throw the data in without integrity checks. Which leads to my current issue. After completing the db2move load process, several tables are in a check pending state and require integrity checks. Integrity checks are done via the following: set integrity for . immediate checked This works for most tables, however, some tables give an error: DB21034E The command was processed as an SQL statement because it was not a valid Command Line Processor command. During SQL processing it returned: SQL3603N Check data processing through the SET INTEGRITY statement has found integrity violation involving a constraint with name "blah.SQL120124110232400". SQLSTATE=23514 The internets tell me that the solution to this issue is to create an exception table based on the actual table and tell the SET INTEGRITY command to send any exceptions to that table (as below): db2 create table blah_EXCEPTION like blah db2 SET INTEGRITY FOR blah IMMEDIATE CHECKED FOR EXCEPTION IN blah USE blah_EXCEPTION NOW, here is the specific issue I am having! The above forces all the rows with issues to the specified exception table. Well that's just super, buuuuuut I can not lose data in this conversion, its simply unacceptable. The internets and IBM has a vague description of sending the violations to the exception tables and then "dealing with the data" that is in the exception table. Unfortunately, I am not clear what this means and I was hoping that some wise individual knows and could help me out and let me know how I can retrieve this data from these tables and place the data in the original/proper table rather than these exception tables. Let me know if you have any questions. Thanks!

  Read the article

• Why can't I use SSL certs imported via Server Admin in a custom Apache install?

  - by morgant

  I've got a couple of Mac OS X 10.6.8 Server web servers that run a custom AMP255 (Apache 2.x, MySQL 5.x, and PHP 5.x) stack installed using MacPorts. We've got a lot of Mac OS X Server servers and generally install SSL certs via Server Admin and they "just work" in the built-in services, however, these web servers have always had SSL certs installed in a non-standard location and used only for Apache. Long story short, we're trying to standardize this part of our administration and install certs via Server Admin, but have run into the following issue: when the certs are installed via Server Admin and referenced in our Apache conf files, Apache then prompts for a password upon trying to start. It does not seem to be any password we know, certainly not the admin or keychain passwords! We've added the _www user to the certusers (mainly just to ensure they have the proper access to the private key in /etc/certificates/). So, with the custom installed certs we have the following files (basically just pasted in from the company we purchase our certs from): -rw-r--r-- 1 root admin 1395 Apr 10 11:22 *.domain.tld.ca -rw-r--r-- 1 root admin 1656 Apr 10 11:21 *.domain.tld.cert -rw-r--r-- 1 root admin 1680 Apr 10 11:22 *.domain.tld.key And the following in the VirtualHost in /opt/local/apache2/conf/extra/httpd-ssl.conf: SSLCertificateFile /path/to/certs/*.domain.tld.cert SSLCertificateKeyFile /path/to/certs/*.domain.tld.key SSLCACertificateFile /path/to/certs/*.domain.tld.ca This setup functions normally. If we use the certs installed via Server Admin, which both Server Admin & Keychain Assistant show as valid, they're installed in /etc/certificates/ as follows: -rw-r--r-- 1 root wheel 1655 Apr 9 13:44 *.domain.tld.SOMELONGHASH.cert.pem -rw-r--r-- 1 root wheel 4266 Apr 9 13:44 *.domain.tld.SOMELONGHASH.chain.pem -rw-r----- 1 root certusers 3406 Apr 9 13:44 *.domain.tld.SOMELONGHASH.concat.pem -rw-r----- 1 root certusers 1751 Apr 9 13:44 *.domain.tld.SOMELONGHASH.key.pem And if we replace the aforementioned lines in our httpd-ssl.conf with the following: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem This prompts for the unknown password. I have also tried httpd-ssl.conf configured as follows: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCertificateChainFile /etc/certificates/*.domain.tld.SOMELONGHASH.concat.pem And as: SSLCertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.cert.pem SSLCertificateKeyFile /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem SSLCACertificateFile /etc/certificates/*.domain.tld.SOMELONGHASH.chain.pem We've verified that the certificate is configured to allow all applications access it (in Keychain Assistant). A diff of the /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem & *.domain.tld.key files shows the former is encrypted and the latter is not, so we're assuming that Server Admin/Keychain Assistant is encrypting them for some reason. I know I can create an unencrypted key file as follows: sudo openssl rsa -in /etc/certificates/*.domain.tld.SOMELONGHASH.key.pem -out /etc/certificates/*.domain.tld.SOMELONGHASH.key.no_password.pem But, I can't do that without entering the password. I thought maybe I could export an unencrypted copy of the key from Keychain Admin, but I'm not seeing such an option (not to mention that the .pem options are greyed out in all export options). Any assistance would be greatly appreciated.

  Read the article

• Why does copying an XML file from Windows Server 2008 R2 64-bit to Windows XP 32-bit change the file?

  - by Alex In Paris

  What I do: Copy an xml file (ctrl+C) on a Win Server 2008 machine. Minimize mstsc.exe (remote connection app). Paste the xml file on to my WinXP machine (ctrl+V). The result: All of the original contents are still present but another bit is appended at the end of it. E.g. the proper end of the file looks something like this: <ApplicationName>MyApp</ApplicationName> </ReceivePort> </ReceivePortCollection> <PartyCollection xsi:nil="true" /> </BindingInfo> But, after the copy, it looks like this: <ApplicationName>MyApp</ApplicationName> </ReceivePort> </ReceivePortCollection> <PartyCollection xsi:nil="true" /> </BindingInfo>al, PublicKeyToken=3zzf3xxxadyyy35" Type="1" TrackingOption="ServiceStartEnd MessageSendReceive PipelineEvents" Description="" /> <ReceivePipelineData xsi:nil="true" /> <SendPipeline xsi:nil="true" /> <SendPipelineData xsi:nil="true" /> <Enable>true</Enable> <ReceiveHandler Name="WCF_OracleDB_Rx" HostTrusted="false"> <TransportType Name="WCF OracleDB" Capabilities="779" Configuratio The extra bits it adds are things that come from earlier in the XML file. If I do the copy multiple times, the extra bits are always exactly the same but another XML file will add different lines. Extra information: If I copy/paste the file, as above, but first enclose it into a zip file I do not have the same problem. I.e. the file copies properly and without any extra surprises. If I do a copy/paste from a Windows Explorer window that's opened to the folder on the remote machine, I do not have the same behavior. I.e. the file copies properly and without any extra surprises. Question: Why does this happen?

  Read the article

• Apache + Tomcat error 120006 Using mod_proxy_ajp for Load Balance

  - by Wakaru44

  I have an apache 2 frontend with two nodes, and a backend with two instances of tomcat 6 balance with mod_proxy_ajp. The bbdd is in a separate machine. All machines use RHEL, 6.2 on the frontend, 5.5 on the backend. The infraestructure is virtualized using VMware. # This is the apache config in one of the virtualHost. ProxyPreserveHost On ProxyPass / balancer://liferay/ <Proxy balancer://liferay> BalancerMember ajp://lrab:8009 route=liferaya BalancerMember ajp://lrbb:8009 route=liferayb status=+H ProxySet lbmethod=byrequests nofailover=on </Proxy> The conector in tomcat is now configured like this: <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" URIEncoding="UTF-8" enableLookups="false" allowTrace="true" /> Do you think it could be useful to set a maxThreads parameter, like in this post?? in that case, How can i determine a proper number of threads? From time to time, we get errors like this [Tue Sep 18 17:57:02 2012] [error] ajp_read_header: ajp_ilink_receive failed [Tue Sep 18 17:57:02 2012] [error] (120006)APR does not understand this error code: proxy: read response failed from 192.168.1.104:8009 (lrab) And apache switches to the pasive node (if its active) or fails with 503. Some things i have tried so far: I think that i have some performance issues with one of the applications, Here you can see a threadDump But i'm not quite sure about it. I also started to monitor the network connection. I have noticed that there are some pings lost when i have a "ping -f " so maybe it could be a network issue, but the success rate is 100% (so the lost packets are only a few among the flood, but maybe, i don't know, enough to break the link betwen apache and tomcat). I wrote a python script to check connectivity with timestamps on the pings, so i can know when the network fails. After sniffing the network , i can also see some RST packets, but i don't know if that is a normal behaviour (some applications do that to end a network communication). I have also noticed that the applications have problems communicating with the database, but im not even sure if this could be related or not. If you think so, i can post more info about it. I changed the connector on the tomcats to use the native one, but still the same. I need not even a solution to this, but maybe some guidance on how can i troubleshoot this better ¿Analyze threads, monitor mysql performance, sniff the traffic between apaches and tomcats? Ultimately, all i need is to balance the tomcat instances in Active/pasive mode, so if there is another way to do it, i could give it a try.

  Read the article

• Secret, unlogged, transparent, case-sensitive proxy in IIS6?

  - by Ian Boyd

  Does IIS have a secret, unlogged, transparent, case-sensitive proxy built into it? A file exists on the web-server: GET http://www.stackoverflow.com/javascript/ModifyQuoteArea.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:20:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... Problem is that a changes made to the file will not get served, the old (i.e. February of last year) version keeps getting served: HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:23:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... The same old file gets served, even though we've: renamed the file deleted the file restarted IIS The request for this file does not appear in the IIS logs (e.g. C:\WINNT\System32\LogFiles\W3SVC7\) And this only happens from the outside (i.e. the internet). If you issue the request locally on the server, then you will: - get the current file (file there) - 404 (file renamed) - 404 (file deleted) But if i change the case of the requested resource, i.e.: GET http://www.stackoverflow.com/javascript/MoDiFyQuOtEArEa.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com Note: MoDiFyQuOtEArEa.js verses ModifyQuoteArea.js Then i do get the proper file (or get the 404 as i expect if the file is renamed or deleted). But any subsequent changes to the file will not show up until i change the case of the file i'm asking for. Checking the IIS logs all indicate that the (internet) requests are all coming the correct client on the internet (i.e. not from some intermediate proxy). Since the file doesn't exist on the hard drive anymore, i conclude that there is a proxy. The requests serviced from this proxy are not logged in the IIS logs. The requests for new files are logged, and from the client IP, not a proxy IP. The proxy is case sensitivie. This does not sound like something Microsoft, or IIS, would do: - a transparent proxy - case-sensitivie - unlogged - surviving restarts of IIS - surviving in a cache for hours i can't believe that our customer's IIS is doing these things. i'm assuming there is some other transparent proxy in front of IIS. Or, does IIS have a transparent, unlogged, case-sensitive, memory based, proxy, that caches content for at least 7 hours? (Come Monday morning, IIS is serving the correct file, unlogged).

  Read the article

• Macintosh computers cannot connect to router unless we re-start the modem and router

  - by dwwilson66

  We have a small office network with DSL and a Netgear WNR-2000 wireless router acting as a DHCP server. There are nine devices connected to the router, wirelessly and wired. Whenever a Mac computer tries to connect, it's unsuccessful until we restart the router. Each of the possible devices that can connect to the network is listed in a table to assign certain IP addresses to certain MAC addresses. I am running WPA-PSK security. I can view the router status and see that the Mac's MAC address is visible to the router, but with a 169.* IP address, even though I'm assigning its MAC address to an IP address within my subnet. All non-Mac devices attached to the network connect properly, and can access the network properly even AFTER the Mac has not successfully connected. The network includes Windows devices, Roku boxes, printers and internet ready TVs. This to me, would point to a DHCP issue with how Mac communicates with my network. One interesting thing to note is that if a Mac connects and is prevented from sleeping, it will stay connected indefinitely; reissuing the security cert from the router works fine. I'm not sure if that's supposed to sever & re-establish a connection with the updated credentials or not, but I do stay connected. If the Mac sleeps and is awakened while the security cert is still valid, it connects fine. If the security certificate expires while the Mac is asleep, we need to restart the router. Restarting the router will ALWAYS assigns the proper IP addresses to the Mac equipment. I have heard anecdotally that Mac doesn't play well with 802.11n; I have not tested any other Wireless protocols. There's a couple issues here: First, I found this on Stack, Mac laptop crashing wireless router, but it's not rally applicable since the router isn't crashing. But, it does give some clues about Mac's accessing the network. I did change my encryption from WEP to WPA-PSK, but after about a week, we're still experiencing the issue. I'm not really sure if there's anything else useful in that question. Second, I'm considering getting a 802.11c router and hooking it up to the wireless N router. the 802.11c router would handle all the Mac traffic, and would be set up as a Mac-only subnet. Everything else would remain as is. However, I'm not sure if this is doable on a technology level...do I need a bridge or is this some way to do this with regular consumer gear?

  Read the article

• IIS 401.3 - Unauthorized on only 1 server out of 3 set up for network load balancing

  - by Tony

  Over the weekend our Server Admin set up two virtual Windows 2008 machines with IIS installed and set them up under NLB. I came in and changed the application pool the website was running under to our domain account that has proper access to the database and the file share hosting our .NET web application Sitefinity, and changed it to .NET 4 Integrated. NLB and everything was running fine on both servers. He brought up the third server for our cluster on Tuesday and I performed the same actions.. The only difference was that I was given admin rights for the third server so I could set it up remotely instead of going to his office. He has full control over the share and NTFS perms on \\hostname\Sitefinity and I believe I only had read access. I pointed the web site to the same \\hostname\Sitefinity\sitename share that the others were on and the authentication/authorization test settings passed. I hit the site from http://localhost (like I did successfully from the other two before trying the cluster's IP address) and I received a HTTP Error 401.3 - Unauthorized. I've verified many times that the application pool is running under the same service account. I tried hitting just a simple test.htm.. works fine on both of the first two servers but I get the same 401.3 on the third. I copied my dev project to the local inetpub directory and re-pointed the website and that ran perfectly. I turned on Failed Request Tracing and it acts like it's still running the local IUSR account I guess (instead of my domain account)? Here is an excerpt of the File Cache Access Start and the error from the trace: FileName \\hostname\sitefinity\sitename\test.htm UserName IUSR DomainName NT AUTHORITY ---------- Successful false FileFromCache false FileAddedToCache false FileDirmoned true LastModCheckErrorIgnored true ErrorCode 2147942405 LastModifiedTime ErrorCode Access is denied. (0x80070005) ---------- ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 3 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) ---------- My personal AD account was then granted read/write perms to the share so I created a new application pool and set the site under it in case there was an issue with the application pool but no success. I created another under my own account and it still failed. It just seems like maybe it's not trying to access the files under the account my application pools are running under although that's the only way I've done things before. I set the Physicial Path Credentials in Advanced Settings on the site to the service account and it threw a 500 error of some sort so I assume that's not the answer (and I don't have to do it on the other servers). It's like somehow I'm trying to force impersonation on the IUSR account or something?

  Read the article

• configuring slime in emacs

  - by CodeKingPlusPlus

  I am in the process of configuring slime for emacs. So far I have read about basic functionality for common lisp such as C-c C-q which invokes the command slime-close-parens-at-point which places the proper number of parens where your mouse is. Another command that seemed cool was invoked by C-c C-c and it would pass the code you are editing in a buffer to the REPL, and "compile" it. Why won't these commands work for me? Anyway, I have downloaded slime via M-x list-packages and do not seem to have this functionality (C-h w and then any of these commands tells me that these commands do note exist). So, I saw a bunch of other slime extensions such as slime-repl', 'slime-fuzzy' and 'hippie-expand-slime'. So I again usedM-x list-packages` and downloaded them. Still I did not have these commands. Here is the content of my emacs file relevant to slime: ;;;Common Lisp and Slime (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-20130626.1151") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-repl-201000404") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/hippie-expand-slime-20130226.1656") (add-to-list 'load-path "/home/s2s2/.emacs.d/elpa/slime-fuzzy-20100404") (require 'slime) (setq slime-lisp-implementations `((sbcl ("/usr/bin/sbcl")) (ecl ("/usr/bin/ecl")) (clisp ("/usr/bin/clisp" "-q -I")))) (require 'slime-repl) (require 'slime-fuzzy) (require 'hippie-expand-slime) When I execute M-x slime I get the following message in the inferior-lisp buffer where I can execute common lisp code (however, shouldn't this be the slime-repl since I required it?): STYLE-WARNING: redefining EMACS-INSPECT (#<BUILT-IN-CLASS T>) in DEFMETHOD STYLE-WARNING: Implicitly creating new generic function STREAM-READ-CHAR-WILL-HANG-P. WARNING: These Swank interfaces are unimplemented: (DISASSEMBLE-FRAME SLDB-BREAK-AT-START SLDB-BREAK-ON-RETURN) ;; Swank started at port: 46533. Then a slime-error buffer is created with the contents: Invalid protocol message: Symbol "CREATE-REPL" not found in the SWANK package. Line: 1, Column: 28, File-Position: 28 Stream: #<SB-IMPL::STRING-INPUT-STREAM {10056B9C33}> (:emacs-rex (swank:create-repl nil) "COMMON-LISP-USER" t 5) How should I modify my emacs file to give me the functionality of those commands? In my emacs file am I not loading the necessary files? Do I need to install an additional package? If you need more information let me know! All help is much appreciated!

  Read the article

• Postfix: How to apply header_checks only for specific Domains?

  - by Lukas

  Basically what I want to do is rewriting the From: Header, using header_checks, but only if the mail goes to a certain domain. The problem with header_check is, that I can't check for a combination of To: and From: Headers. Now I was wondering if it was possible to use the header_checks in combination with smtpd_restriction_classes or something similar. I've found a lot information about header_checks and multiple header fields, when searching the net. All of them basically telling me, that one can't combine two header for checking. But I didn't find any information if it was possible to only do a header check if a condition (eg. mail goes to example.com) was met. Edit: While doing some more Research I've found the following article which suggests to add a Service in postfix master.cf, use a transportmap to pass mails for the Domain to that service and have a separate header_check defined with -o. The thing is that I can't get it to work... What I did so far is adding the Service to the master.cf: example unix - - n - - smtpd -o header_checks=regexp:/etc/postfix/check_headers_example Adding the followin Line to the transportmap: example.com example: Last but not least I have two regexp-files for header checks, one for the newly added service, and one to redirect answers to the rewritten domain. check_headers_example: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 Obviously if someone answers, the mail would go to nirvana, so I have the following check_headers defined in the main postfix process: /To:(.*)<(.*)@mydomain.example.com>(.*)/ REDIRECT [email protected]$2 Somehow the Transport is ignored. Any help is appreciated. Edit 2: I'm still stuck... I did try the following: smtpd_restriction_classes = header_rewrite header_rewrite = regexp:/etc/postfix/rewrite_headers_domain smtpd_recipient_restrictions = (some checks) check_recipient_access hash:/etc/postfix/rewrite_table, (more checks) In the rewrite_table the following entries exist: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 All it gets me is a NOQUEUE: reject: 451 4.3.5 Server configuration error. I couldn't find any resources on how you would do that but some people saying it wasn't possible. Edit 3: The reason I asked this question was, that we have a customer (lets say customer.com) who uses some aliases that will forward mail to a domain, let's say example.com. The mailserver at example.com does not accept any mail from an external server that come from a sender @example.com. So all mails that are written from example.com to [email protected] will be rejected in the end. An exception on example.com's mailserver is not possible. We didn't really solve this problem, but will try to work around it by using lists (mailman) instead of aliases. This is not really nice though, nor a real solution. I'd appreciate all suggestions how this could be done in a proper way.

  Read the article

• Malicious program changing my DNSs

  - by julio.alegria

  Some weeks ago I started having problems with my internet connection, it was extremely slow and suddently some websites (specifically gmail, facebook, youtube and twitter) started failing to connect, while the rest connect normally. Some days after, those same websites started showing me a message in portuguese: "Nova atualização disponível" whenever I tried to connect and a .exe file started downloading ("internet_update.exe" or something like that). That's when I freaked out! It was definitely a virus or something like that, but it was really weird because I never had a problem like that (I run Linux). So I turned on my old PC (running Windows XP) and it turned out it had the same problem! the same message was showed whenever I tried to connect one of those specific websites, while the rest loaded without problems. Even in my Android smarthphone the same message was showed. So it was obvious that the problem was not in a particular machine but in the router itself. So I started googling and I found some information, unfortunately I only found some in spanish, so I will make you a short summary: It is a new banking trojan developed specifically to infect and collect information from Brasilian banks. Apparently now it has expanded to Argentina and Peru. So how does it work? It spreads through social networks (videos, links, ...) and then it "takes control" of your internet connection by changing the values of your DNSs. More specifically, it changes the Primary DNS to one of this IPs: 108.170.13.38, 66.7.216.122 or 63.143.43.154 and the Secondary DNS to 8.8.8.8, this secondary DNS is actually the Google Public DNS, and it is configured this way so that your internet connection continue working properly and the user does not notice anything. The important part here is that because no download or install has been made in your machine, no antivirus will notice any change. After your DNSs have been changed, the trojan controls every single website you connect to and this way they steal your bank information. So after reading about this I accesed to my router and I restored my Primary and Secondary DNSs to their proper values, but one day after I had the same problem again. This is actually a 50% warning post - 50% help me! post. So, here comes the question: Is there any possible way to prevent my DNSs of being changed?

  Read the article

• How do I get the latest FastCGI and PHP versions to peacefully coexist on IIS 6?

  - by BHelman

  I have been going round and round trying to get any sort of PHP running on IIS 6. I somehow managed to successfully get version 5.1.4 running using the php5isapi.dll file. However, I want to upgrade a website to begin using a Content Management System. I have never dug into CMS before so I'm open to programs that are easy to use. I am currently looking into TomatoCMS and ImpressCMS - but that's beside the point. I have never done an installation with PHP before and I think I'm getting familiar with how it works. However the current situation is this. Microsoft's Web Platform Installer 2.0 installed FastCGI for me. I need to upgrade to PHP 5.3.1 for a CMS system. So I downloaded the Windows installer and let it go at it. After consulting several other blog articles, I believe I know how it is supposed to work but I am currently not having luck. THE SETUP *.php is a registered extension in IIS 6 for all websites (on Win 2k3). The application that it calls is C:\Windows\system32\inetsvr\fcgiext.dll, like it should. The fcgiext.ini config has the proper lines: [Types] php=PHP [PHP] ext=C:\program files\PHP\php-cgi.exe And the php.ini file also has the correct configs. All extensions are disabled and I changed the correct things for FastCGI. And everything is registered correctly with the PATH variable. Everything is exactly how it should be. BUT when I launch the "info.php" page () on another computer, I get the following error: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: * Section [PHP] not found in config file. * Error Number: 1413 (0x80070585). * Error Description: Invalid index. HTTP Error 500 - Server Error. Internet Information Services (IIS) A quick Google search reveals that I have it all setup correctly as far as the INI's go and the mapping of the php extension. I am completely at a loss. Does anyone have any suggestions? Although the server is hosting three small websites, I don't really care what I have to do to it to get it to work.

  Read the article

• Sendmail smtp-auth issues

  - by SlackO

  I'm running into a problem with Sendmail trying to implement SMTP- auth. I"m running 8.14.5 and have saslauthd running under FreeBSD 7.0-R. I don't believe I have starttls enabled (but I also compiled a version with it and have been testing it too - same problem) - just looking for basic auth, but am wondering if my configuration is not compatible with modern mail clients? I don't think I have any certs set up. It seems an older version of Microsoft Outlook Express works fine with SMTP-auth with no problems, but Outlook 2010 won't work, and neither will Eudora (basic settings to not use encryption and use same uid/pw as pop3 account name) When trying to send mail the server reports: "550 571 Relaying Denied. Proper authentication required." Is there some config that I am missing? Why does it work with Outlook Express but not other e-mail clients? my site.config.m4 has: APPENDDEF(confENVDEF',-DSASL=2') APPENDDEF(conf_sendmail_LIBS',-lsasl2') dnl APPENDDEF(confLIBDIRS',-L/usr/local/lib/sasl2') APPENDDEF(confLIBDIRS',-L/usr/local/lib') APPENDDEF(confINCDIRS',-I/usr/local/include') My sendmail.mc has: define(ConfAUTH_OPTIONS',A') TRUST_AUTH_MECH(LOGIN PLAIN')dnl define(ConfAUTH_MECHANISMS',`LOGIN PLAIN')dnl My /usr/local/lib/sasl2/Sendmail.conf has: pwcheck_method: saslauthd When I restart sendmail this shows up in the logs: Jun 16 12:36:24 x sm-mta[79090]: restarting /usr/sbin/sendmail due to signal Jun 16 12:36:24 x sm-mta[81145]: starting daemon (8.14.5): SMTP+queueing@00:30:00 Jun 16 12:36:24 x sm-mta[81147]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jun 16 12:36:24 x sm-mta[81148]: STARTTLS=client, relay=mxgw1.mail.nationalnet.com., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 testing on the cmd line: telnet localhost 587 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 xxxt ESMTP Sendmail 8.14.5/8.14.5; Fri, 15 Jun 2012 18:28:03 -0500 (CDT) ehlo localhost 250-xxxx Hello localhost [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN 250-DELIVERBY 250 HELP I am not using any certs or ssl right now - just trying to get basic auth to work. Anyone have any ideas?

  Read the article

• PDF Corruption When Sending with Microsoft Products

  - by Winner

  I have the same PDF corruption problem in two different offices that I am the tech support for. Office 1: Started in the middle of December. PDF received from outside the office and is viewable with no problems. I have no control over how it is created. If it is forwarded to anyone else, the PDF is corrupted. I have forwarded it to multiple people in the office. I have tried viewing with Reader 8, 9, Sumatra and Fox IT. I have tried forwarding to Gmail and their viewer says it is corrupted. If I save the PDF and create a new email, it will be corrupted when sent using Outlook 2003, Outlook 2007, Microsoft Live Mail and Outlook Express. If I create the email using Thunderbird 3, Gmail or the webclient Iclient for IPSwitch IMail it will not be corrupted. I have confirmed the same results when using our IMail SMTP and also Using Gmail as the SMTP server. To be clear, if I created in Thunderbird, Gmail or Iclient and received on any of the MS products, it will be viewable. This office receives PDFs daily from multiple sources. There is only a small subset that are having this problem. So far they problem PDFs are from two different companies they deal with, but not all of the PDFs are bad. Office 2: PDFs are created by a management system. I'm not sure what engine is used to create them. Same exact same issues. At both offices, I noticed that the file size is wrong. One small PDF the proper file size is 12kb for the PDF when it's viewable, when it shows up corrupted it is only 8kb. We handle the email for both offices. Both are POP servers, not Exchange. IMail was updated after these issues start. I have tried different SMTP servers and it still seems to happen only when using Microsoft products to send. Anyone else having problems with PDFs getting corrupted? Any ideas how to find out a resolution?

  Read the article

• How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

  - by Qwerty

  This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

  Read the article

• SMTP for multiple domains on virtual interfaces

  - by Pawel Goscicki

  The setup is like this (Ubuntu 9.10): eth0: 1.1.1.1 name.isp.com eth0:0 2.2.2.2 example2.com eth0:1 3.3.3.3 example3.com example2.com and example3.com are web apps which need to send emails to their users. 2.2.2.2 points to example2.com and vice-versa (A/PTR). MX - Google. Google handles all incoming mail. 3.3.3.3 points to example3.com and vice-versa (A/PTR). MX - Google. Google handles all incoming mail. Requirements: Local delivery must be disabled (must deliver to MX specified server), so that the following works (note that there is no local user bob on the machine, but there is an existing bob email user): echo "Test" | mail -s "Test 6" [email protected] I need to be able to specify from which IP/domain name the email is delivered when sending an email. I fought with sendmail. With not much luck. Here's some debug info: sendmail -d0.12 -bt < /dev/null Canonical name: name.isp.com UUCP nodename: host a.k.a.: example2.com a.k.a.: example3.com ... Sendmail always uses canonical name (taken from eth0). I've found no way for it to select one of the UUCP codenames. It uses it for sending email: echo -e "To: [email protected]\nSubject: Test\nTest\n" | sendmail -bm -t -v [email protected]... Connecting to [127.0.0.1] via relay... 220 name.isp.com ESMTP Sendmail 8.14.3/8.14.3/Debian-9ubuntu1; Wed, 31 Mar 2010 16:33:55 +0200; (No UCE/UBE) logging access from: localhost(OK)-localhost [127.0.0.1] >>> EHLO name.isp.com I'm ok with other SMTP solutions. I've looked briefly at nbsmtp, msmtp and nullmailer but I'm not sure thay can deal with disabling local delivery and selecting different domains when sending emails. I also know about spoofing sender field by using mail -a "From: <[email protected]>" but it seems to be a half-solution (mails are still sent from isp.com domain instead of proper example2.com, so PTR records are unused and there's more risk of being flagged as spam/spammer).

  Read the article

• Looking for a new backup solution to replace dying tape drive

  - by E3 Group

  We're running Windows Server 2003 SBS and another machine with Server 2003 Standard on it. The SBS server is about 7 years old running pretty much 24/7 - a HP server of some description. We have an Ultrium 448 cycling LTO2 400GB tapes daily and incrementally backing up approximately 100gb worth of data (20gb C:\ and system state, 40gb exchange, 40gb database for some crap marketing software) on BackupExec 10D. As of 5 months ago, the backups have been consistently failing with IO errors, bad reads and some write errors. When I say consistent, I mean every time and we haven't had a proper backup for the entire 5 months - So if the server explodes tomorrow, 7 years worth of data will just cease to exist. I've only just recently rejoined the company and am looking at rectifying the more concerning problems, so the first thing I did was try a backup to an USB2.0 external drive. It was excruciatingly slow. In fact it was so slow it took 40 hours and it still wasn't finished. I ended up cancelling it and reconfiguring the selections again to reduce file size. This, however, isn't a permanent solution. I concluded that the IO error was either from a faulty tape drive (which has a tape stuck in there right now and not coming out) or from a dying SCSI controller. Neither of them are good news and both are extremely expensive to fix. I'm operating on an extremely low budget so have been looking at outsourcing the backups. A company in Sydney (where I'm located) offer incremental online backups via a NAS. It costs almost double a new tape drive but offers monthly repayments which will let us get through times when cash flow is minimal. It seems like a sweet deal but it is still a little bit pricey. So I'm looking for a cheaper, yet reliable solution. Maybe some in-house NAS or something offsite? The idea is to avoid using tapes. Are there any recommendations for rectifying my current situation? Or are tapes the only way to go? I'm concerned that the server will die one day in the near future and I must be able to restore it to another server with different hardware.

  Read the article

• VirtualBox - multiple guests, each with a single bridged adapter?

  - by Martin

  I am running a dedicated server (located at Hetzner, Germany) that runs VirtualBox in order to virtualize several services accross multiple virtual guests. Those guests are supposed to communicate with each other (for instance, a virtual web server has to access a virtual database server); to be reachable from the dedicated server (for instance, SSH access); and to access the Internet via the dedicated server (for instance, to download security updates) Currently, this is achieved by having host-only adapter vboxnet0 on the dedicated server and two virtual interfaces on each guest. There, virtual adapter eth0 is attached to vboxnet0 (to achieve (1) and (2)), virtual adapter eth1 is attached to VirtualBox' NAT (to achieve (3)). Via eth0, the guests have access to a DHCP and a DNS server, both running on the dedicated server (there, bound to vboxnet0). This allows me to assign custom IP addresses and names. Via eth1, VirtualBox pushes a proper route that enables each guest to access the Internet (via eth0 on the dedicated server). This setup with two virtual adapters frequently leads to problems and at leasts complicates many things. For instance, on the dedicated server there is OpenVPN which allows to access the virtual machines via the Internet; futhermore, there is Shorwall that controls the incoming and outgoing network traffic between the Internet, the dedicated server, and the individual virtual machines. Not to mention automatic installation of servers via PXE... Therefore, I would prefer to have only one single virtual adapter on each guest which would be used for both incoming and outgoing connections. As far as I understand, one would basically use a bridged interface for that very purpose. Now the question arises: Which interface on the dedicated server would the bridge use? eth0 on the host server is not an option, as this is prohibited by the provider. A virtual interface eth0:0 would not make any sense, as a bridge always uses a physical interface (eth0 in this case). Would it be possible to create a bridged interface in each virtual machine that would "dangle in the air"? Thus, without a complement on the dedicated server? How would I have to set up the routing on the host server? Please note that the host / dedicated server has only one network adapter (eth0) which is connected to the provider's network. Regards, Martin

  Read the article

• Core i7 c1e and speedstepping - BSOD on shutdown

  - by DeaconDesperado

  I'm having an interesting problem with my recent Core i7 Digital Audio workstation build that I am curious to see if others have encountered. First, here are the specs on the machine. ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB Intel Core i7-950 3.06Ghz 8M LGA1366 CPU CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Western Digital Caviar Black WD5001AALS 500GB Plus a couple ASUS optical drives and a 750W Corsair PSU. Running Windows 7 x64. All this is connected to the nefarious Digi 002 firewire audio interface for use with Pro Tools. I following mostly the specs posted by many other I7 users in the digidesign community who pooled their collective knowledge in this thread. Now after completing my build, I fell victim to the "UD5 squeal" described at that forum thread. So taking the advice posted, I disabled c1e advanced halt state and Intel speed stepping (I would likely have done this anyway to maintain a stable clock, power consumption isn't really a relevant concern on this machine.) I enabled XMP to set the ram timings properly as well. What I am experiencing is a BSOD upon shutdown, but only immediately after windows fully exits and ends all processes. The error is a MACHINE_CHECK_EXCEPTION 0x000000. The funny thing is that it is extremely intermitent and only occurs if the shutdown immediately followed a period of relative idleness. It does not a generate a minidump, I suspect because windows monitoring has terminated by the time this error occurs. No damage is evident and one can simply turn off manually and the system will act as though a proper shutdown had occurred. If anything it is a annoyance, I just want to be certain it is not affecting my long term stability. I have read that the i7 950 does not like DRAM voltages past 1.65, but that they are acceptable if they are within .5 of the BLCK setting. I have tried disabling XMP and setting all timings to auto and the problem still manifests in an identical way. It is suspect that the cpu idleness preceding shutdown is the determining factor, as both c1e and speedstepping are both settings intended to modify handling of this state. Any suggestions or prior experiences would be greatly appreciated. EDIT: The behavior very closely resembles what's described in this thread: http://www.tomshardware.com/forum/12003-63-shut-problem-windows The benign nature of it of is identical. I can't seem to download the hotfix cited there however.

  Read the article

• How to move Mailboxes over from old Exchange 2007 to new EBS 2008 network?

  - by Qwerty

  Hi all, This q is similar to: http://serverfault.com/questions/39070/how-to-move-exchange-2003-mailbox-or-store-from-2003-to-2007-on-separate-networks Basically I am trying to move our exchange mailboxes over to a test domain that is hosting EBS2008 with Exchange 2007. We plan to move as soon as we can when we have our exchange data over. I have tried moving a db with mailboxes over but cannot get it to mount in the new Exchange in any way possible, including mounting it onto a recovery store. From my understanding the ONLY prerequisite for moving Exchange DBs across is that it must have the same Organizational name (unlike previous versions of Exchange). If anyone has any insight as to why I cannot mount and simply reattach the mailboxes, please give me an idea as to what could be wrong. It should be as simple as this. Note that the DBs I have are in a clean state. I cannot use ExMerge because I am not running any mailboxes on 2003. I have also tried using a 32bit Vista machine with the Export-Mailbox cmdlet to extract mailboxes but anything I do to it results in Permission errors. I have tried to troubleshoot these with no success. I am running in full admin with proper exchange roles and yet it still gives me access denied errors: Export-Mailbox : MapiExceptionNetworkError: Unable to make admin interface conn ection to server. (hr=0x80040115, ec=-2147221227) Also some errors show in the management console: get-MailboxDatabase Completed Warning: ERROR: Could not connect to the Microsoft Exchange Information Store service on server TATOOINE.baytech.local. One of the following problems may be occurring: 1- The Microsoft Exchange Information Store service is not running. 2- There is no network connectivity to server TATOOINE.baytech.local. 3- You do not have sufficient permissions to perform this command. The following permissions are required to perform this command: Exchange View-Only Administrator and local administrators group for the target server. 4- Credentials have been cached for an unpriviledged user. Try removing the entry for this server from Stored User Names and Passwords. Why I have to use a 32bit machine to export a simple .pst file is beyond me... So yeah I am now out of ideas and any help would be great! Thanks in advance.

  Read the article

• Generating/managing config files for hosted application

  - by mfinni

  I asked a question about config management, and haven't seen a reply. It's possible my question was too vague, so let's get down to brass tacks. Here's the process we follow when onboarding a new customer instance into our hosted application : how would you manage this? I'm leaning towards a Perl script to populate templates to generate shell scripts, config files, XML config files, etc. Looking briefly at CFengine and Chef, it seems like they're not going to reduce the amount of work, because I'd still have to manually specify all of the changes/edits within the tool. Doesn't seem to be much of a gain over touching the config files directly. We add a stanza to the main config file for the core (3rd-party) application. This stanza has values that defines the instance (customer) name the TCP listener port for this instance (not one currently used) the DB2 database name (serial numeric identifier, already exists, they get prestaged for us by the DBAs) three sub-config files, by name - they need to be created from 3 templates and be named after the instance The sub-config files define: The filepath for the DB2 volumes The filepath for the storage of objects The filepath for just one of the DB2 volumes (yes, redundant to the first item. We run some application commands, start the instance We do some LDAP thingies (make an OU for the instance, etc.) We add a stanza to the config file for our security listener that acts as a passthrough to LDAP instance name LDAP OU TCP port for instance DB2 database name We restart the security listener (off-hours), change the main config file from item 1, stop and restart the instance. It is now authenticating via LDAP. We add the stop and start commands for this instance to the HA failover scripts. We import an XML config file into the instance that defines things for the actual application for the customer - user names, groups, permissions, and business rules. The XML is supplied by the implementation team. Now, we configure the dataloading application We add a stanza to the existing top-level config file that points to a new customer-level config file. The new customer-level config file includes: the instance (customer) name the DB2 database name arbitrary number of sub-config files, by name Each of the sub-config files defines: filepaths to the directories for ingestion, feedback, backup, and failure those filepaths have a common path to a customer-specific folder, and then one folder for each sub-config file Each of those filepaths needs to be created We need to add this customer instance to our monitoring scripts that confirm the proper processes are running and can be logged into. Of course, those monitoring config files include the instance name, the TCP port, the DB2 database name, etc. There's also a reporting application that needs to be configured for the new instance. You get the idea. There's also XML that is loaded into WAS by the middleware team. We give them the values for them to plug into the XML - they could very easily hand us the template and we could give them back completed XML.

  Read the article

• Assign fixed IP address via DHCP by DNS lookup

  - by Janoszen

  Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

  Read the article

• ISPconfig3 + CentOS 6.2 , confused on how to move forward after initial install?

  - by Damainman

  I installed ISPCONFIG3 on centos 6.2 using the great guide on howtoforge.com. Everything is up and running and I can access ISPCONFIG via a browser. However I am not sure how to move forward with the initial setup so I can setup the very first account and get my website live. Details: Only have 1 server, the centos+ispconfig is running on a virtual machine of XEN XCP. I setup the server name to be server1.mydomain.com. I only have 2 usable ips. I plan to use them as follows: xx.xx.xx.01 : For my website and the websites of all accounts I add. xx.xx.xx.02 : For ns1.mydomain.com and ns2.mydomain.com (Yea I know they should be different ips at different locations, but this is what I have to work with at the moment.... ) I registered the nameservers at my registrar with the .02 ip. I want to use bind and ISPconfig to run the DNS on my server itself and not via my registrar. Right now if I go to the .01 IP it shows the centos+apache successful install page. So to break it down basically I am not sure where to start when it comes to: (What to consider and what to do to setup the first domain on the server) Telling bind to use the name server domains with .02. Setting up my First website(which will be my main website) in ISPconfig so mydomain.com resolves properly to my server. Make it so when you go to the .01 IP, it either redirects or shows the contents of my main website. (If this can't be done, then any advice is appreciated) Making sure that when I add a new domain, it automatically puts in the proper information for the domain so it points to the right mail, database, dns, entry. If I overlooked a tutorial then please feel free to let me know, and any advice would be greatly appreciated. Some of the tutorials I found were not specific to doing everything on only one server with Centos+Apache+Bind. Right now all I did was install centos and install ISPconfig3. Trying to move forward correctly so I don't mess up everything I did by not knowing what to do. Thank you in advance!!

  Read the article

• Windows server detected error with hard disk

  - by user53864

  We have hosting Windows server 2008 R2 and I am working as admin in small company. The server is hanging and restarting as the hard disk seems to be damaged due to power fluctutaion(though having inverter) as it's showing the below error message on server reboot: Problem detected with the hard disk Press any key to continue It's Seagate 1TB SATA hard disk and it's booting after pressing enter. So it's clear that the hard disk is dying. Yes, it's in warranty but it's fact that warranty won't recover the lincesed windows server 2008 and it's data. As it's booting now, I backed up required things and I am thinking to clone the entire hard disk. The first thing it striked me is checking on the Seagate site if any tool available for cloning and I found Seagate DiskWizard but not specified it for windows server 2008. Please anybody could help me giving your best ideas for the below: Urgently, What's the best way(free of cost) for me to clone in my case with the new same sized hard disk? It's a one time lincenced and I cannot use the same key again if I reinstall the server. Will the lincense be carried with new disk if cloned? else there is a way to contact Microsoft explaining the problem occurred, to obtain new key for no charge?. I want to take measure for future. How do I keep two disks in continuous sync? mirrored & raid are the only options converting the disks to dynamic? or is there a best way I could do with no additional charge?. Any help is greatly appreciated. Thank you! EDIT:1 I started cloning the disk with CloneZilla and it was going proper showing in GUI. But after some time there is no GUI but a black screen with some codes(looks like disk location numbers) going page by page(I have attached the screenshots below captured from my phone). Do you people think it's actually cloning?. I started in the morning and it's evening now. I left the office now to let it finish what it's trying to do and I'll go & check it tomorrow. Slowly lost hope, don't know what face it's going to show tomorrow. Any ideas?

  Read the article

• script to count the occurence of the particular string in the given time interval

  - by pruthvi

  We are trying to write a script "sendemail.sh" to count the number of occurrence of a particular string in a log file "SendEmail.log" within the given interval. We have a log file. In that we are searching for a pattern "ReqInputMsgLog" and need to count the number of times it occurred in the given period for eg: from "2014-08-19 11:30" to "2014-08-19 11:34". And our script look like this: #!/bin/sh enterdate=$1 echo $enterdate enddate=$2 enterdate1=`date +%s -d $enterdate +"%Y-%m-%d %H:%M"` echo $enterdate1 enddate1=`date +%s -d $enddate +"%Y-%m-%d %H:%M"` echo $enddate count=0 cat SendEmail.log | grep "ReqInputMsgLog" | awk -F "[" '{print $3}' | awk -F "," '{print $1}' > /con/scripts_server/file.txt for line in `cat /con/scripts_server/file.txt` do logdate=`echo $line | awk -F : '{print $1":"$2}'` if [[ $logdate < $enddate1 ]]; then count=`expr $count + 1` fi done echo $count But when we are trying to execute the script by the below command its not showing the proper count. ./sendemail.sh "2014-08-19 11:30" "2014-08-19 11:34" Log file is very big one. Small chunk has been posted here. INFO [SIBJMSRAThreadPool : 5] [2014-08-19 11:18:24,471] SendEmail - 8/19/14 11:18 AM,ECCF25B0-0147-4000-E000-1B830A3C05A9,ReqInputMsgLog,SendEmail,<?xml version="1.0" encoding="UTF-8"?> <in:sendEmailRequestMsg xmlns:in="http://EmailMed/EmailMedInterface" xmlns:ns0="wsdl.http://EmailMed/EmailMedInterface" xmlns:ns1="http://EmailMed/EmailMedInterface" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:me="wsdl.http://EmailMed/EmailMedInterface" xsi:type="me:sendEmailRequestMsg"> <in:sendEmail xmlns:xci0="http://EmailMed/EmailMedInterface"> INFO [SIBJMSRAThreadPool : 7] [2014-08-19 11:18:14,235] SendEmail - 8/19/14 11:18 AM,ECCEFDB2-0147-4000-E000-1B830A3C05A9,ReqInputMsgLog,SendEmail,<?xml version="1.0" encoding="UTF-8"?> <in:sendEmailRequestMsg xmlns:in="http://EmailMed/EmailMedInterface" xmlns:ns0="wsdl.http://EmailMed/EmailMedInterface" xmlns:ns1="http://EmailMed/EmailMedInterface" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:me="wsdl.http://EmailMed/EmailMedInterface" xsi:type="me:sendEmailRequestMsg"> <in:sendEmail xmlns:xci0="http://EmailMed/EmailMedInterface"> INFO [SIBJMSRAThreadPool : 7] [2014-08-19 11:18:14,241] SendEmail - xmlText: <?xml version="1.0" encoding="UTF-8"?> after awk command we will get a file "/con/scripts_server/file.txt" which looks similar like below: 2014-08-19 11:28:03 2014-08-19 11:28:06 2014-08-19 11:28:17 2014-08-19 11:28:53 2014-08-19 11:29:02 2014-08-19 11:29:47 2014-08-19 11:29:57 2014-08-19 11:30:07 2014-08-19 11:30:17 2014-08-19 11:30:19 2014-08-19 11:30:19 2014-08-19 11:30:22 2014-08-19 11:30:25 2014-08-19 11:30:25 2014-08-19 11:30:36 2014-08-19 11:30:51 2014-08-19 11:30:56 2014-08-19 11:30:59 2014-08-19 11:30:59 2014-08-19 11:31:08 2014-08-19 11:31:25 2014-08-19 11:32:19 2014-08-19 11:32:22 2014-08-19 11:32:27 2014-08-19 11:32:28 2014-08-19 11:32:41 2014-08-19 11:32:49 2014-08-19 11:32:59 2014-08-19 11:33:27 2014-08-19 11:33:41 2014-08-19 11:34:07 2014-08-19 11:34:14 2014-08-19 11:34:21 2014-08-19 11:34:25 2014-08-19 11:34:38 2014-08-19 11:34:50 2014-08-19 11:34:58

  Read the article

• Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >