Search Results

Search found 8215 results on 329 pages for 'high ball'.

Page 176/329 | < Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >

• How to troubleshoot latency between 2 linux hosts

  - by Jimm

  The latency between 2 linux hosts is about .23ms. They are connected by one switch. Ping & Wireshark confirm the latency number. But, i dont have any visibility into what is causing this latency. How can i know if the latency is due to NIC on host A or B or the switch or the cables? UPDATE: The .23 ms latency is bad for my existing application, which sends messages at very high frequency and i am trying to see if it can be brought down to .1ms

  Read the article

• Understanding ESXi and Memory Usage

  - by John

  Hi, I am currently testing VMWare ESXi on a test machine. My host machine has 4gigs of ram. I have three guests and each is assigned a memory limit of 1 GB (and only 512 MB reserved). The host summary screen shows a memory capacity of 4082.55 MB and a usage of 2828 MB with two guests running. This seems to make sense, two gigs for each VM plus an overhead for the host. 800MB seems high but that is still reasonable. But on the Resource Allocation Screen I see a memory capacity of 2356 MB and an available capacity of 596 MB. Under the configuration tab, memory link I see a physical total of 4082.5 MB, System of 531.5 MB and VM of 3551.0 MB. I have only allocated my VMs for a gig each, and with two VMs running they are taking up almost two times the amount of ram allocated. Why is this, and why does the Resource Allocation screen short change me so much?

  Read the article

• Streamline Active Directory account creation via automated web site

  - by SteveM82

  In my company we have high employee turnover, and hence our helpdesk receives about a dozen requests per week for new Active Directory accounts. Currently, we receive these requests simply via e-mail or voice-mail, and rarely do we have all of the information necessary to create the account. I would like to find a web application that can be used by a manager or supervisor to formalize the requests they make for AD accounts for new employees under their command. Ideally, the application would prompt for all of necessary information, and allow the helpdesk to review the requests and approve or deny each one. If approved, the application would take care of creating the account and send an e-mail to the manager. I have found several application on the Internet that handle self-service account management (i.e., password resets or update contact info), which is also nice to have, but nothing that streamlines the new account request and creation part. Can anyone make suggestions on such an application? Thanks.

  Read the article

• No Sound from headphone jack

  - by Tural Teyyuboglu

  I have DELL Inspiron N5110 laptop. Using windows 8. Recently I got an issue: The problem is, when I insert headphones and microphone into laptop, I get only microphone inserted notification. Laptop detects microphone But no headphones. In fact, It mutes sound from it's speakers. But no sound from headphones too: I tested headphones separately: they're working well. I also, reinstalled windows default sound drivers and IDT High Definition Audio drivers several times. No success! The final decision is: There is no sound from headphone jack in laptop. Any suggestions?

  Read the article

• Optimal way to make MySQL backups for fairly large databases (MyISAM / InnoDB)

  - by WinkyWolly

  Currently we have one beefy MySQL database that runs a couple of high traffic Django based websites as well as some e-commerce websites of decent size. As a result we have a fair amount of large databases using both InnoDB and MyISAM tables. Unfortunately we've recently hit a wall due to the amount of traffic so I've setup another master server to help alleviate reads / backups. Now at the moment I simply use mysqldump with a few arguments and it's proven to be fine.. until now. Obviously mysqldump is a slow quick method however I believe we've outgrown its use. I now need a good alternative and have been looking into utilizing Maatkits mk-parallel-dump utility or an LVM snapshot solution. Succinct short version: I have a fairly large MySQL databases I need to backup Current method using mysqldump is inefficient and slow (causing issues) Looking into something such as mk-parallel-dump or LVM snapshots Any recommendations or ideas would be appreciated - since I have to re-do how we're doing things I rather have it done properly / most efficient :).

  Read the article

• Diagnose cause of long running requests in IIS 7.0

  - by Shlomi Fruchter

  We are running an ASP.NET web application on IIS 7.0, Windows Server 2008 R2, with SQL Server 2008 R2 for DB. On weekends, when the traffic is high, the request queue length in the IIS servers increase (up to 800 requests) and then drops, every minute or so. I can see that the servers are handling some requests which, according to the 'Current Requests' view in IIS Manager, are long running (thier Time Elapsed value ranges from 20 to 50 seconds). Those requests are not necessarily heavy queries, actually, I can't understand why they are taking so long. Can it be because the client is closing the connection on his side? Thanks, Shlomi

  Read the article

• Amazon EC2: how to find out detailed CPU usage?

  - by j0nes

  I am running several EC2 instances, and I want to know the exact work my CPU is doing. On "normal" machines I am doing this with munin and its CPU plugin which looks at the statistics provided by /proc/stat. On my EC2 machines however, I get incorrect graphs. The machine has two cores, so the max CPU usage should be 200% - however it gets as high as 400%: I know that I should use Amazon CloudWatch to see the total CPU usage (and this is the official and recommended from Amazon way to do this), but I am specifically looking on how the CPU usage is spend (e.g. system, user, iowait). Is there a way to get detailed CPU usage statistics on EC2 instances?

  Read the article

• What software works well for viewing massive TIFF images on Windows 7?

  - by nhinkle

  Today I saw an article about a half-gig, 24000 square-pixel high-res composite image of the moon. (This is a much smaller version of the image) I find astronomy interesting, so I thought I'd download it and take a look. With 4GB of RAM and an i5 processor, I figured my computer could handle it. Unfortunately, the built-in Windows Picture Viewer didn't do such a great job. While it opened the file without a problem, zooming in was ineffective. The zoomed out image loaded, but zooming in just showed a scaled-up version of the zoomed-out version, not any detail: Closing the picture viewer also took a very long time, and the whole process used up much more RAM than the 500MB of the picture (usage went from 1.3GB to 3.8GB). What other software would work better for this? I would prefer something that is free and fairly simple. I don't really want to use an editor (like photoshop or GIMP), just a nice lightweight viewer. Any suggestions?

  Read the article

• Is it wise to use SSHDs (Solid state hybrid drives) on a server?

  - by Seb

  I have a bunch of servers with very heavy I/O that currently use SATA3/SAS drives, but do suffer from I/O wait on the SATA drives, and I have just been alerted to the existence of SSHDs which cost the same for 1TB as the 1TB SATA drives that we currently use. However, previously (until Seagate shipped their first 3.5" SSHD in March) they seemed to be exclusively for Netbooks/Notebooks, which leads me to suspect they're not exactly built for the heavy I/O they'd be in for with my servers. So, would an SSHD give me a performance boost over my SATA3 drives in a heavy I/O environment (such as multiple very large high speed file transfers) or is it best to stick with SATA3 with I/O wait??

  Read the article

• latency, regular alternations. Pfsense, network

  - by Tillebeck

  Any idea why grapgh is a shown? It i two pfsense boxes and I have not looked into where they ping to and if it is related to the server they ping. Trafic graphs are following a normal 24 hour cycle and not related to either of the latency graphs Img1: High frequent ulteration in latency. Just started a few days back. Peaks are not perfectly regular but varies from 40min to 1hour Img2: This is a different router on another internet connection. Most of our routers shown this kind of latency graphs - so for our setup it is "normal". Please note that second graph is for a whole week and not just some hours

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• Separating my VPN connection from my internet access

  - by Christi

  Background: Home PC is Windows XP and using Cisco VPN client; home internet connection is fast (20MB) office VPN router is Cisco RV110W; work internet connection is slow (1.5MB) With VPN connected, my home PC internet surfing is very slow. I looked this up in Google and found talk about splitting, tunneling, routing tables, etc., but I'm not sure what/how to do it. Basically, I would like a persistent VPN connection with the office resources, and at the same time, utilize my home high speed internet connection to access the internet. Can someone help me the steps as how-to?

  Read the article

• Optimal Disk Setup for OLTP SQL Server

  - by Chris

  We have a high transaction (lots of reads and writes) database server (running SQL 2005) that is currently set up with a RAID 1 OS partition (C:) and a RAID 5 data/log/tempdb partition (D:). The C: has 2 drives and the D: has 4 drives. The server has around 300 databases ranging from 10MB to 2GB in size. I have been reading up on best practices for partioning the disks, but would like some opinions on our setup since we are so limited in the number of disks. It seems like RAID 10 is popular, but I dont think we could use it with only 6 total disks to work with. Thanks. Update I went with 3 RAID 1 Partitions (2 disks each) Partition 1: OS, TempDB, Backups Partition 2: Logs Partition 3: Data

  Read the article

• Am I using too much memory? (Rails on EC2 with Resque)

  - by Stpn

  I am looking at the memory usage of the Rails application (it uses background processes via Resque) and since the common answer to the question, "how many workers is too many" was "test and see", I ran some memory commands and wonder if someone can help figuring if the memory usage is high enough already, or I can still add some extra workers.. so (this is all under the maximum load): $ free -t -m total used free shared buffers cached Mem: 1756 1532 223 0 12 229 -/+ buffers/cache: 1291 464 Swap: 895 10 885 Total: 2652 1543 1108 $ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 10588 156172 13400 326476 1 6 4 0 5 4 1 0 99 0 If there is any extra info I can provide to help answer this, I would be happy to do so. If the question is strange in some way, please let me know I'd be glad to fix etc..

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• How can I run a job when the server load is low?

  - by jberryman

  I have a command that runs a disk snapshot (on EC2, freezing an XFS disk and running an EBS snapshot command), which is set to run on a regular schedule as a cron job. Ideally I would like to be able to have the command delayed for a period of time if the disk is being used heavily at the moment the task is scheduled to run. I'm afraid that using nice/ionice might not have the proper effect, as I would like the script to run with high priority while it is running (i.e. wait for a good time, then finish fast). Thanks.

  Read the article

• Fan is spinning too fast just in Windows - software?

  - by B. Roland

  I've recently replaced my fans (CPU, GPU, and bought a CHA fan). The GPU remained the same, but I've seen it when it was spinned 2 times faster, than it usual... but it is rarely. The problem is, that the CPU fan in Windows (especially 7) spinned too much, 'cos it keeps in under 40°C, and it is spinning with 3300-3600 RPM, which is too high I think. If I swich to Ubuntu, it keeps on ~40-45°C with with 2500-2800 RPM, which is a big difference in numbers, and in noise. I'm looking for a manual fan control solution, or just reduce the Windows' multipliers of fan speed control, somehow... I was bought the new fans because of the lower noise (and it does it, but not with 3.6k RMP). Thank you!

  Read the article

• Fast, reliable data transfers from/to China

  - by Nils

  We are a small company and we will need to transfer rather large amounts of data (10GB+ each time) between Europe and China in the near future. As many may have experienced, Internet connections to or from China can be rather unreliable and slow at times without any apparent reason. For example, while sending data to China via FTP generally works well, it can be painfully slow in the other direction. Currently, we are investigating new ways to have high transfer rates in both directions. So far we have tried: FTP (see above) FTP over VPN services (generally slower than direct connections) F2F (like Retroshare or Freenet - slow!!) Aspera (fast but expensive!) BitTorrent (unreachable end nodes, b/c of firewalls which we must not configure) We would like to try: Cloud storage (e.g. Amazon S3, Google Storage) - are those services always and reliably reachable from inside China? Point-to-Point VPN (currently not possible, b/c of the network, see above) I'd be especially grateful to hear from people who have already dealt with this kind of problem before.

  Read the article

• GPU Computing - # of GPUs supported

  - by TehTypoKing

  I currently have a desktop with 6 GPUs ( 3x HD 5970s ) in non-crossfire mode. Unfortunately, it seems that Windows 7 64bit only supports up to 4 GPUs. I have not been able to find a reliable source to deny or confirm this. If windows 7 has this limitation, is there a Linux flavor that supports more than 4 GPUs? In-case you are wondering, this is not for gaming but high-speed single precision computing. With this current setup ( if I can find 6gpu support ) I am looking to reach 13.8 Teraflops. Also, my motherboard does support 3 16x pci-xpress gen2 slots... and I have a 1500w powersupply plugged into a 20amp outlet. Windows is able to detect all 6 cores.. although, 2 of which displays the warning "Drivers failed to load". To recap: - Can windows support 6 GPUs? - If not, does Linux? Thank you.

  Read the article

• Esxi with iSCSI SAN slows down with many multiple VMs running

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas). Those two machines are connected to each other with Gigabit ethernet, and a procurve switch in between. After a while, if I have many(4-5 or more) vms running, they start to get un-responsive (long delays before anything happens). We are trying to find the reason behind this. Today we looked at esxtop, and found that DAVG of that iSCSI LUN stays at 70-80. I read that +30 is critical! What could be causing those high response-times?

  Read the article

• Commit charge peak higher than system limit

  - by Grubsnik

  We are seeing some very strange behaviour on our servers and google didn't turn up anything usefull, so I'm tossing it out here. A standard server is configured with 4GB Ram, 2 4GB pagefiles and running windows server 2003. The servers are running 50-120 vb6/.net applications which normally consume no more than 100mb of memory, but will occasionally run up to 300 mb. The issue with a single process spending way too much memory is being traced down somewhere else, but the thing that is baffling us is that the reported peak charge is vastly higher than what we have available. As the image above shows, we are getting reported peaks that are way higher than what the system is actually capable of delivering. This number has been seen as high as 29GB, which makes no sense at all for a system with a limit of 12GB. Does anyone have an idea what is going on?

  Read the article

• Does my dd-wrt installation support firewall logging?

  - by SpikeX

  I would like to log firewall events. I know this is possible with dd-wrt, but a lot of the documentation I've read states that this isn't possible with a micro installation of dd-wrt (based on BusyBox). I have a Netgear WNDR3700v2 router, and it does have BusyBox installed on it, but I don't know if the dd-wrt build is a micro build or not. How can I find this out, or how can I find out if my router supports firewall logging or not? Currently, if I enable all firewall logging (setting everything to "Enabled" and/or "High" gives me back blank firewall logs - but syslogd is working because I can view other system log messages).

  Read the article

• How do I disable microphone volume auto-adjusting?

  - by balpha

  My coworkers started yelling at me today because apparently I started screaming in their ears during a Google hangout. And sure enough, when I go to the Microphone settings dialog, I can see the level being auto-adjusted constantly; sometimes way too high. I don't think this has happened previously; at least nobody ever complained. Can I find out who is doing that auto-adjusting, and more importantly, can I turn it off? I couldn't find any related setting in the recording device settings. I'm using Windows 7 64bit, and (I'm mentioning this because the theory has come up that it may be related) I don't have Skype running.

  Read the article

• Problem with internet connection

  - by vijay.shad

  Hi all, I am working on windows vista. I have got two internet connections, one is wifi connection with high speed. And other is mobile network connection. There is a very strange problem I am getting. When I connect to wi-fi connection I an not able to serf internet(actually not all the sites). I am able to search on Google but when i click on any link in the search list it does not open. But I am able to serf all the pages in google.com domain and also all the pages in stackoverflow domain. But i am not able to go to page http://repo1.maven.org/maven2 But When I am connected by my mobile network. I am able to serf any site. Can you please tell me what might me the problem with my settings.

  Read the article

• What kind of SSL certificate do I need?

  - by Christoffer

  Hi, I want to install HTTPS on my server and I wonder what kind of certificate I will need and where I can buy it. The site is a web application that demands high security by it's users since they store sensitive business data. I am also integrating a third party payment gateway into the register process of the site and need a secure way to send credit card data one way. I do not intend to store this data in our own database. So, what do I need? And also, how do I install it on Ubuntu Server 9.10 / Apache2 ? Cheers! Christoffer

  Read the article

< Previous Page | 172 173 174 175 176 177 178 179 180 181 182 183  | Next Page >