Search Results

Search found 9667 results on 387 pages for 'auto generation'.

Page 177/387 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

• How to change metamode in xorg.conf so that my game in FHD will be displayed only in the external monitor?

  - by Patryk

  I would like to launch my game only in the external monitor which I have attached to my laptop with hdmi cable. This is my current xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 319.60 (buildmeister@swio-display-x64-rhel04-15) Wed Sep 25 15:17:31 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "metamodes" "1024x786,NULL;1280x720,NULL;NULL,1680x1050;NULL,1920x1080" SubSection "Display" Depth 24 EndSubSection EndSection Although with this config nothing changes (I have my game displayed in the laptop screen and exceeding a little bit onto the external monitor since I set it to be in 1920x1080) I have read this https://help.ubuntu.com/community/XineramaHowTo but with no luck of solving this issue. The only temporary solution for this problem now is to manually switch of the laptop display and then launch the game.

  Read the article

• Cannot ping static ip on eth1

  - by Calvin Froedge

  I am trying to ping the network interface I have set up for eth1. This is my config: auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1 broadcast 192.168.1.255 If I ping 192.168.1.2, I get: Ping 192.168.1.2 (192.168.1.2) 56(84) bytes of data. From 192.168.1.3 icmp_seq=3 Destination Host Unreachable Results of ifconfig tell me that the IPv4 address is 192.168.1.3. I can ping this ip. Bcast and Mask are as expected (same as in definition). I can ping 192.168.1.3 from my macbook. I cannot ping 192.168.1.2 locally or from my macbook. Any ideas why?

  Read the article

• Making your WCF Web Apis to speak in multiple languages

  - by cibrax

  One of the key aspects of how the web works today is content negotiation. The idea of content negotiation is based on the fact that a single resource can have multiple representations, so user agents (or clients) and servers can work together to chose one of them. The http specification defines several “Accept” headers that a client can use to negotiate content with a server, and among all those, there is one for restricting the set of natural languages that are preferred as a response to a request, “Accept-Language”. For example, a client can specify “es” in this header for specifying that he prefers to receive the content in spanish or “en” in english. However, there are certain scenarios where the “Accept-Language” header is just not enough, and you might want to have a way to pass the “accepted” language as part of the resource url as an extension. For example, http://localhost/ProductCatalog/Products/1.es” returns all the descriptions for the product with id “1” in spanish. This is useful for scenarios in which you want to embed the link somewhere, such a document, an email or a page.  Supporting both scenarios, the header and the url extension, is really simple in the new WCF programming model. You only need to provide a processor implementation for any of them. Let’s say I have a resource implementation as part of a product catalog I want to expose with the WCF web apis. [ServiceContract][Export]public class ProductResource{ IProductRepository repository;  [ImportingConstructor] public ProductResource(IProductRepository repository) { this.repository = repository; }  [WebGet(UriTemplate = "{id}")] public Product Get(string id, HttpResponseMessage response) { var product = repository.GetById(int.Parse(id)); if (product == null) { response.StatusCode = HttpStatusCode.NotFound; response.Content = new StringContent(Messages.OrderNotFound); }  return product; }} The Get method implementation in this resource assumes the desired culture will be attached to the current thread (Thread.CurrentThread.Culture). Another option is to pass the desired culture as an additional argument in the method, so my processor implementation will handle both options. This method is also using an auto-generated class for handling string resources, Messages, which is available in the different cultures that the service implementation supports. For example, Messages.resx contains “OrderNotFound”: “Order Not Found” Messages.es.resx contains “OrderNotFound”: “No se encontro orden” The processor implementation bellow tackles the first scenario, in which the desired language is passed as part of the “Accept-Language” header. public class CultureProcessor : Processor<HttpRequestMessage, CultureInfo>{ string defaultLanguage = null;  public CultureProcessor(string defaultLanguage = "en") { this.defaultLanguage = defaultLanguage; this.InArguments[0].Name = HttpPipelineFormatter.ArgumentHttpRequestMessage; this.OutArguments[0].Name = "culture"; }  public override ProcessorResult<CultureInfo> OnExecute(HttpRequestMessage request) { CultureInfo culture = null; if (request.Headers.AcceptLanguage.Count > 0) { var language = request.Headers.AcceptLanguage.First().Value; culture = new CultureInfo(language); } else { culture = new CultureInfo(defaultLanguage); }  Thread.CurrentThread.CurrentCulture = culture; Messages.Culture = culture;  return new ProcessorResult<CultureInfo> { Output = culture }; }}   As you can see, the processor initializes a new CultureInfo instance with the value provided in the “Accept-Language” header, and set that instance to the current thread and the auto-generated resource class with all the messages. In addition, the CultureInfo instance is returned as an output argument called “culture”, making possible to receive that argument in any method implementation   The following code shows the implementation of the processor for handling languages as url extensions.   public class CultureExtensionProcessor : Processor<HttpRequestMessage, Uri>{ public CultureExtensionProcessor() { this.OutArguments[0].Name = HttpPipelineFormatter.ArgumentUri; }  public override ProcessorResult<Uri> OnExecute(HttpRequestMessage httpRequestMessage) { var requestUri = httpRequestMessage.RequestUri.OriginalString;  var extensionPosition = requestUri.LastIndexOf(".");  if (extensionPosition > -1) { var extension = requestUri.Substring(extensionPosition + 1);  var query = httpRequestMessage.RequestUri.Query;  requestUri = string.Format("{0}?{1}", requestUri.Substring(0, extensionPosition), query); ;  var uri = new Uri(requestUri);  httpRequestMessage.Headers.AcceptLanguage.Clear();  httpRequestMessage.Headers.AcceptLanguage.Add(new StringWithQualityHeaderValue(extension));  var result = new ProcessorResult<Uri>();  result.Output = uri;  return result; }  return new ProcessorResult<Uri>(); }} The last step is to inject both processors as part of the service configuration as it is shown bellow, public void RegisterRequestProcessorsForOperation(HttpOperationDescription operation, IList<Processor> processors, MediaTypeProcessorMode mode){ processors.Insert(0, new CultureExtensionProcessor()); processors.Add(new CultureProcessor());} Once you configured the two processors in the pipeline, your service will start speaking different languages :). Note: Url extensions don’t seem to be working in the current bits when you are using Url extensions in a base address. As far as I could see, ASP.NET intercepts the request first and tries to route the request to a registered ASP.NET Http Handler with that extension. For example, “http://localhost/ProductCatalog/products.es” does not work, but “http://localhost/ProductCatalog/products/1.es” does.

  Read the article

• How to solve exception_priv _instruction exception while running destop project? [on hold]

  - by Haritha

  While running desktop project im getting exception_priv _instruction how to solve this??? while running this page is coming # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_PRIV_INSTRUCTION (0xc0000096) at pc=0x02f5a92b, pid=3012, tid=3104 # # JRE version: 7.0-b147 # Java VM: Java HotSpot(TM) Client VM (21.0-b17 mixed mode, sharing windows-x86 ) # Problematic frame: # C 0x02f5a92b # # Failed to write core dump. Minidumps are not enabled by default on client versions of Windows # # If you would like to submit a bug report, please visit: # http://bugreport.sun.com/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x02f5a800): JavaThread "LWJGL Application" [_thread_in_native, id=3104, stack(0x076f0000,0x07740000)] siginfo: ExceptionCode=0xc0000096 Registers: EAX=0x000df4f0, EBX=0x32afc180, ECX=0x000df4f0, EDX=0x00000020 ESP=0x0773f768, EBP=0x0773f790, ESI=0x32afc180, EDI=0x02f5a800 EIP=0x02f5a92b, EFLAGS=0x00010206 Top of Stack: (sp=0x0773f768) 0x0773f768: 02bd429c 02bd429c 0773f770 32afc180 0x0773f778: 0773f7b8 32b022c8 00000000 32afc180 0x0773f788: 00000000 0773f7a0 0773f7dc 00943187 0x0773f798: 229ec1c0 00948839 69081736 00000000 0x0773f7a8: 089b0048 00000000 00000014 00001406 0x0773f7b8: 00000002 0773f7bc 32afbeb0 0773f7f8 0x0773f7c8: 32b022c8 00000000 32afbf00 0773f7a0 0x0773f7d8: 0773f7f0 0773f81c 00943187 69081736 Instructions: (pc=0x02f5a92b) 0x02f5a90b: 00 43 00 00 00 00 f0 bc 02 e8 00 e9 22 40 f7 73 0x02f5a91b: 07 85 a5 94 00 90 f7 73 07 50 cc a0 6d d8 49 c0 0x02f5a92b: 6d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x02f5a93b: 00 00 00 00 00 00 00 00 00 08 80 3d 37 00 00 00 Register to memory mapping: EAX=0x000df4f0 is an unknown value EBX=0x32afc180 is an oop {method} - klass: {other class} ECX=0x000df4f0 is an unknown value EDX=0x00000020 is an unknown value ESP=0x0773f768 is pointing into the stack for thread: 0x02f5a800 EBP=0x0773f790 is pointing into the stack for thread: 0x02f5a800 ESI=0x32afc180 is an oop {method} - klass: {other class} EDI=0x02f5a800 is a thread Stack: [0x076f0000,0x07740000], sp=0x0773f768, free space=317k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C 0x02f5a92b j org.lwjgl.opengl.GL11.glVertexPointer(IILjava/nio/FloatBuffer;)V+48 j com.badlogic.gdx.backends.lwjgl.LwjglGL10.glVertexPointer(IIILjava/nio/Buffer;)V+53 j com.badlogic.gdx.graphics.glutils.VertexArray.bind()V+149 j com.badlogic.gdx.graphics.Mesh.bind()V+25 j com.badlogic.gdx.graphics.Mesh.render(IIIZ)V+32 j com.badlogic.gdx.graphics.Mesh.render(III)V+8 j com.badlogic.gdx.graphics.g2d.SpriteBatch.flush()V+197 j com.badlogic.gdx.graphics.g2d.SpriteBatch.switchTexture(Lcom/badlogic/gdx/graphics/Texture;)V+1 j com.badlogic.gdx.graphics.g2d.SpriteBatch.draw(Lcom/badlogic/gdx/graphics/Texture;FFFF)V+33 j sevenseas.game.WorldRenderer.drawBob()V+54 j sevenseas.game.WorldRenderer.render()V+12 j sevenseas.game.GameClass.render(F)V+38 j com.badlogic.gdx.Game.render()V+19 j com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop()V+642 j com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run()V+27 v ~StubRoutines::call_stub V [jvm.dll+0x122c7e] V [jvm.dll+0x1c9c0e] V [jvm.dll+0x122e73] V [jvm.dll+0x122ed7] V [jvm.dll+0xccd1f] V [jvm.dll+0x14433f] V [jvm.dll+0x171549] C [msvcr100.dll+0x5c6de] endthreadex+0x3a C [msvcr100.dll+0x5c788] endthreadex+0xe4 C [kernel32.dll+0xb713] GetModuleFileNameA+0x1b4 Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j org.lwjgl.opengl.GL11.nglVertexPointer(IIIJJ)V+0 j org.lwjgl.opengl.GL11.glVertexPointer(IILjava/nio/FloatBuffer;)V+48 j com.badlogic.gdx.backends.lwjgl.LwjglGL10.glVertexPointer(IIILjava/nio/Buffer;)V+53 j com.badlogic.gdx.graphics.glutils.VertexArray.bind()V+149 j com.badlogic.gdx.graphics.Mesh.bind()V+25 j com.badlogic.gdx.graphics.Mesh.render(IIIZ)V+32 j com.badlogic.gdx.graphics.Mesh.render(III)V+8 j com.badlogic.gdx.graphics.g2d.SpriteBatch.flush()V+197 j com.badlogic.gdx.graphics.g2d.SpriteBatch.switchTexture(Lcom/badlogic/gdx/graphics/Texture;)V+1 j com.badlogic.gdx.graphics.g2d.SpriteBatch.draw(Lcom/badlogic/gdx/graphics/Texture;FFFF)V+33 j sevenseas.game.WorldRenderer.drawBob()V+54 j sevenseas.game.WorldRenderer.render()V+12 j sevenseas.game.GameClass.render(F)V+38 j com.badlogic.gdx.Game.render()V+19 j com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop()V+642 j com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run()V+27 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x003d6c00 JavaThread "DestroyJavaVM" [_thread_blocked, id=3240, stack(0x008c0000,0x00910000)] =>0x02f5a800 JavaThread "LWJGL Application" [_thread_in_native, id=3104, stack(0x076f0000,0x07740000)] 0x02bcf000 JavaThread "Service Thread" daemon [_thread_blocked, id=2612, stack(0x02e00000,0x02e50000)] 0x02bc1000 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=2776, stack(0x02db0000,0x02e00000)] 0x02bbf400 JavaThread "Attach Listener" daemon [_thread_blocked, id=2448, stack(0x02d60000,0x02db0000)] 0x02bbe000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1764, stack(0x02d10000,0x02d60000)] 0x02bb8000 JavaThread "Finalizer" daemon [_thread_blocked, id=3864, stack(0x02cc0000,0x02d10000)] 0x02bb3400 JavaThread "Reference Handler" daemon [_thread_blocked, id=2424, stack(0x02c70000,0x02cc0000)] Other Threads: 0x02bb1800 VMThread [stack: 0x02c20000,0x02c70000] [id=3076] 0x02bd1000 WatcherThread [stack: 0x02e50000,0x02ea0000] [id=3276] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 4928K, used 2571K [0x229c0000, 0x22f10000, 0x27f10000) eden space 4416K, 46% used [0x229c0000, 0x22bc2e38, 0x22e10000) from space 512K, 100% used [0x22e90000, 0x22f10000, 0x22f10000) to space 512K, 0% used [0x22e10000, 0x22e10000, 0x22e90000) tenured generation total 10944K, used 634K [0x27f10000, 0x289c0000, 0x329c0000) the space 10944K, 5% used [0x27f10000, 0x27faea60, 0x27faec00, 0x289c0000) compacting perm gen total 12288K, used 1655K [0x329c0000, 0x335c0000, 0x369c0000) the space 12288K, 13% used [0x329c0000, 0x32b5dc58, 0x32b5de00, 0x335c0000) ro space 10240K, 42% used [0x369c0000, 0x36dfc660, 0x36dfc800, 0x373c0000) rw space 12288K, 53% used [0x373c0000, 0x37a38180, 0x37a38200, 0x37fc0000) Code Cache [0x00940000, 0x009d8000, 0x02940000) total_blobs=305 nmethods=80 adapters=158 free_code_cache=32183Kb largest_free_block=32955904 Dynamic libraries: 0x00400000 - 0x0042f000 C:\Program Files\Java\jre7\bin\javaw.exe 0x7c900000 - 0x7c9af000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x629c0000 - 0x629c9000 C:\WINDOWS\system32\LPK.DLL 0x74d90000 - 0x74dfb000 C:\WINDOWS\system32\USP10.dll 0x78aa0000 - 0x78b5e000 C:\Program Files\Java\jre7\bin\msvcr100.dll 0x6d940000 - 0x6dc61000 C:\Program Files\Java\jre7\bin\client\jvm.dll 0x71ad0000 - 0x71ad9000 C:\WINDOWS\system32\WSOCK32.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d8d0000 - 0x6d8dc000 C:\Program Files\Java\jre7\bin\verify.dll 0x6d370000 - 0x6d390000 C:\Program Files\Java\jre7\bin\java.dll 0x6d920000 - 0x6d933000 C:\Program Files\Java\jre7\bin\zip.dll 0x6cec0000 - 0x6cf42000 C:\Documents and Settings\7stl0225\Local Settings\Temp\libgdx7stl0225\37fe1abc\gdx.dll 0x10000000 - 0x1004c000 C:\Documents and Settings\7stl0225\Local Settings\Temp\libgdx7stl0225\52d76f2b\lwjgl.dll 0x5ed00000 - 0x5edcc000 C:\WINDOWS\system32\OPENGL32.dll 0x68b20000 - 0x68b40000 C:\WINDOWS\system32\GLU32.dll 0x73760000 - 0x737ab000 C:\WINDOWS\system32\DDRAW.dll 0x73bc0000 - 0x73bc6000 C:\WINDOWS\system32\DCIMAN32.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x070b0000 - 0x07115000 C:\DOCUME~1\7stl0225\LOCALS~1\Temp\libgdx7stl0225\52d76f2b\OpenAL32.dll 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\SHELL32.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x76fd0000 - 0x7704f000 C:\WINDOWS\system32\CLBCATQ.DLL 0x77050000 - 0x77115000 C:\WINDOWS\system32\COMRes.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.dll 0x73f10000 - 0x73f6c000 C:\WINDOWS\system32\dsound.dll 0x76c30000 - 0x76c5e000 C:\WINDOWS\system32\WINTRUST.dll 0x77a80000 - 0x77b15000 C:\WINDOWS\system32\CRYPT32.dll 0x77b20000 - 0x77b32000 C:\WINDOWS\system32\MSASN1.dll 0x76c90000 - 0x76cb8000 C:\WINDOWS\system32\IMAGEHLP.dll 0x72d20000 - 0x72d29000 C:\WINDOWS\system32\wdmaud.drv 0x72d10000 - 0x72d18000 C:\WINDOWS\system32\msacm32.drv 0x77be0000 - 0x77bf5000 C:\WINDOWS\system32\MSACM32.dll 0x77bd0000 - 0x77bd7000 C:\WINDOWS\system32\midimap.dll 0x73ee0000 - 0x73ee4000 C:\WINDOWS\system32\KsUser.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x69000000 - 0x691a9000 C:\WINDOWS\system32\sisgl.dll 0x73b30000 - 0x73b45000 C:\WINDOWS\system32\mscms.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x66e90000 - 0x66ed1000 C:\WINDOWS\system32\icm32.dll 0x07760000 - 0x0778d000 C:\Program Files\WordWeb\WHook.dll 0x74c80000 - 0x74cac000 C:\WINDOWS\system32\OLEACC.dll 0x76080000 - 0x760e5000 C:\WINDOWS\system32\MSVCP60.dll VM Arguments: jvm_args: -Dfile.encoding=Cp1252 java_command: sevenseas.game.MainDesktop Launcher Type: SUN_STANDARD Environment Variables: PATH=C:/Program Files/Java/jre7/bin/client;C:/Program Files/Java/jre7/bin;C:/Program Files/Java/jre7/lib/i386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.7.0\bin;C:\eclipse; USERNAME=7stl0225 OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 4 stepping 1, cmov, cx8, fxsr, mmx, sse, sse2, sse3 Memory: 4k page, physical 2031088k(939252k free), swap 3969920k(3011396k free) vm_info: Java HotSpot(TM) Client VM (21.0-b17) for windows-x86 JRE (1.7.0-b147), built on Jun 27 2011 02:25:52 by "java_re" with unknown MS VC++:1600 time: Sat Oct 26 12:35:14 2013 elapsed time: 0 seconds

  Read the article

• Why did Ubuntu suddenly get so slow?

  - by user101383

  12.10 has been slowing down mysteriously. Normally, in past versions, I can log in, open Firefox, and it will pop up within seconds. 12.10 is like that upon install too, though once I install my old apps, it gets very slow by Ubuntu standards. After login the hard drive will just make noise for a while before the OS will do anything. Hardware: enter description: Desktop Computer product: XPS 8300 () vendor: Dell Inc. serial: B6G2WR1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=desktop uuid=44454C4C-3600-1047-8032-C2C04F575231 core description: Motherboard product: 0Y2MRG vendor: Dell Inc. physical id: 0 version: A00 serial: ..CN7360419G04VQ. slot: To Be Filled By O.E.M. *cpu description: CPU product: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-through unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-through unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 8MiB capacity: 8MiB capabilities: internal write-back unified *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 8GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 0 serial: 7228183 slot: DIMM3 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 1 serial: 1E28183 slot: DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 2 serial: 9E28183 slot: DIMM4 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 3 serial: 5527183 slot: DIMM2 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A05 date: 09/21/2011 size: 64KiB capacity: 4032KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:fe600000-fe6fffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: Juniper [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:d0000000-dfffffff memory:fe620000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:fe640000-fe643fff *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:45 memory:fe708000-fe70800f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fe707000-fe7073ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:46 memory:fe700000-fe703fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 memory:fe500000-fe5fffff *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:16 memory:fe500000-fe503fff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 memory:fe400000-fe4fffff *-network description: Ethernet interface product: NetLink BCM57788 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 18:03:73:e1:a7:71 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:47 memory:fe400000-fe40ffff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fe706000-fe7063ff *-isa description: ISA bridge product: H67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:43 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe705000-fe7057ff *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fe704000-fe7040ff ioport:f000(size=32) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Hitachi HUA72201 vendor: Hitachi physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: JP4O serial: JPW9J0HD21BTZC size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000641dc *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 4e3d91b7-fd38-4f44-a9e9-ba3c39b926ec size: 585GiB capacity: 585GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-10-21 16:26:50 filesystem=ext4 lastmountpoint=/ modified=2012-10-29 18:12:08 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2012-10-29 18:12:08 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 7823MiB capacity: 7823MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 7823MiB capabilities: nofs *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 84a92aae-347b-7940-a2d1-f4745b885ef2 size: 337GiB capacity: 337GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-10-21 18:43:39 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRWBD DH-12E3S vendor: PLDS physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: MD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-scsi:2 physical id: 3 bus info: usb@2:1.8 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdb configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@6:0.0.1 logical name: /dev/sdc configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@6:0.0.2 logical name: /dev/sdd configuration: sectorsize=512 *-disk:3 description: SCSI Disk product: MS/MS-Pro vendor: Generic- physical id: 0.0.3 bus info: scsi@6:0.0.3 logical name: /dev/sde version: 1.03 serial: 3 capabilities: removable configuration: sectorsize=512 *-medium physical id: 0 logical name: /dev/sde

  Read the article

• Turbo C++ to Visual Studio 2010 migration [closed]

  - by BigGenius

  OK, based on my previous questions and your help., I have gone to install Visual Studio Express. But now problem is, the programs which I successfully code at home on Visual Studio don't run on Turbo C++ compiler at school (assuming I type the program instead of exporting code). Is there anything I can do? Also I am just learning basic syntax and data handling, loops, structures, arrays and all. But Visual Studio has auto completion and pretty typing (which may be advantageous) but crap for a beginner getting hold on to language. Sorry, if I have been unclear. But what should I do? This will make me lazy programmer and will reflect in my grades. Is there any other IDE, which I can use, very similar to Turbo C++ and able to run in Windows 7 in fullsreen mode.

  Read the article

• Factors to consider when building an algorithm for gun recoil

  - by Nate Bross

  What would be a good algorithm for calculating the recoil of a shooting guns cross-hairs? What I've got now, is something like this: Define min/max recoil based on weapon size Generate random number of "delta" movement Apply random value to X, Y, or both of cross-hairs (only "up" on the Y axis) Multiply new delta based on time from the previous shot (more recoil for full-auto) What I'm worried about is that this feels rather predicable, what other factors should one take into account when building recoil? While I'd like it to be somewhat predictable, I'd also like to keep players on their toes. I'm thinking about increasing the min/max recoil values by a large amount (relatively) and adding a weighting, so large recoils will be more rare -- it seems like a lot of effort to go into something I felt would be simple. Maybe this is just something that needs to be fine-tuned with additional playtesting, and more playtesters? I think that it's important to note, that the recoil will be a large part of the game, and is a key factor in the game being fun/challenging or not.

  Read the article

• Black Login Screen after installing updates 12.04

  - by general_guts

  I love my lixux 12.04..till yesterday it installed new updates and i clicked on restart.. As system went to grub all normal & loaded normal..then instead of pretty desktop (auto login turned on) i have black screen asking for login and password.. Why? How i get my desktop back to before? Please help new noob!!! This is due to updates i am sure, nothing in hardware has changed and no other display settings changed.. using AMD diver from there site linux one for my raedeon 6850 and have catalyst driver working fine.. i have tried typing in weird commands but they didnt do much like sudo start lightdm and sudo startx .. didnt do anything just froze.. i dont exactly no what these commands do but something to do with black screen..so i thought id try it.. Thanks

  Read the article

• Bridging: Loosing WLAN network connection with 4addr on option - Why?

  - by WitchCraft

  Question: For use with my Xen VM, I need to create a virtual network interface (vif) that is bridged to wlan0. If in /etc/network/interfaces I add auto xenbr0 iface xenbr0 inet dhcp And then later do brctl addif xenbr0 wlan0 I get this error message. can't add wlan0 to bridge xenbr0: Operation not supported I found out that Linux won't let you bridge a wireless interface in managed mode at all unless you enable the 4addr option (needed to recompile iw): iw dev wlan0 set 4addr on Afterwards brctl addif xenbr0 wlan0 works, and brctl show shows xenbr0 as bridged to wlan0. Unfortunately, as soon as I execute iw dev wlan0 set 4addr on my entire network connection is gone (no connection). As soon as then I execute iw dev wlan0 set 4addr off I reconnect and it works again. If I re-execute 4addr on, it breaks again, if I execute 4addr off, it works again. Unfortunately, I can't just turn 4addr on, activate the bridge and then turn it back off (error: device not ready). Does anybody know why I loose my connection ?

  Read the article

• How can I change my cursor behavior?

  - by Doug Clement

  When I am typing, my mouse cursor, if left on the text, will eventually auto-click in whatever space in the the text box I happen to be, causing me to type in the middle of a sentence. Also, the cursor in the text box will frequently stop mid-word and the screen will scroll down all of a sudden when pressing the space bar while typing. My question is, how do I change this behavior because it is driving me absolutely bat crap crazy. I have an Acer Aspire One D257 Netbook. I am not sure if it's a Xubuntu problem because it does this while I am using Windows 7 too. Any help would be nice, thanks!

  Read the article

• Android Cocos2DX using C++ in Eclipse Helios Windows XP

  - by 25061987

  I have used Eclipse Helios 3.6.1 for Java development. I wanted to start C++ development in the same IDE so I installed Autotools Support For CDT, C/C++ Development Tools, C/C++ Library API Documentation Hover Help plugins.I have included #include "cocos2d.h" in my HelloWorldScene.h file now when writing the below statement cocos2d::CCSprite * ccSprite; I am not getting auto completion bar(template proposals) on writing like coco and pressing Ctrl + Space from my keyboard. What can be the problem?This might help you solve my problem. Please check here. This is what I got after clicking Right Click Project - Index - Search for Unresolved Index. But I have added all includes check here. I think this is causing problem in Content Assist. What should I do in this case? Inclusion seems proper.

  Read the article

• Get a Silverlight XAP signing certificate for cheap thanks to GoDaddy

  One of the new features in Silverlight 4 is the ability to sign your XAP applications so that your out-of-browser trusted applications look more friendly (trusted) to your users, they come from a verified publisher, and they can take advantage of the auto-update APIs in Silverlight. If you dont know what Im talking about, heres some resources for some background: XAP Signing in Silverlight 4 HOWTO Video: Sign Silverlight 4 Applications Basically if you are writing a Silverlight 4 trusted...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• 3 language website using subdomains and mapped domains. Add subdomains or mapped domains to WMT?

  - by Owen Mclaughlin

  I have a new wordpress multisite setup. Main language Italian and 2 subdomains using en and de for english and german. There is no auto translation plugins being used. The wordpress theme being used is by Studiopress.com and have SEO built in. I am a little confused as which domains to use in Webmasters Tools. If I use the subdomains (en and de) which have the seo setup, then google will index and show the en.example.it wont know about the mapped domains or display them. If I use the mapped domains then won't google not see the seo for the subdomains. I am muddled with this. What do??

  Read the article

• Gnome Keyring keeps asking for a password that doesn't exist

  - by Chris Wilson

  When ever I long into Ubuntu, I'm immediately presented with a dialogue that asks me to enter the password that will unlock Gnome Keyring, however I was never prompted to set this in the first place, and none of the passwords I've tried are effective. How can I disable these popups and just have Gnome Keyring unlocked when I log in in the same way that encrypted home directories are automatically mounted upon log in. FWIW, I'm set to auto log in, which may or may not be useful information. Btw, I've seen this question, and the accepted answer didn't work. I'd rather not uninstall Keyring Update 1: I've disabled automatic login but it still appears.

  Read the article

• REST or Non-REST on Internal Services

  - by tyndall

  I'm curious if others have chosen to implement some services internally at their companies as non-REST (SOAP, Thrift, Proto Buffers, etc...) as a way to auto-generate client libraries/wrappers? I'm on a two year project. I will be writing maybe 40 services over that period with my team. 10% of those services definitely make sense as REST services, but the other 90% feel more like they could be done in REST or RPC style. Of these 90%, 100% will be .NET talking to .NET. When I think about all the effort to have my devs develop client "wrappers" for REST services I cringe. WADL or RSDL don't seem to have enough mindshare. Thoughts? Any good discussions of this "internal service" issue online? If you have struggled with this what general rules for determining REST or non-REST have you used?

  Read the article

• how to set owner and permission to a cryptsetup made device?

  - by Antoine Rodriguez

  I have an encrypted loopback volume. I need to mount and umount manually the volume so I use cryptsetup luksOpen and cryptsetup luksClose . However, When I invoke this command it pops up the /dev/mapper device under all the sessions under gnome/xfce/kde/unity ... And then it let the user to mount (with password), expulse and unmount the volume. It's quite annoying in a multi user server (you are working on your files and the volume is being unmounted). How can I define ownership and permission on the device ? I've tried chown and chmod approach witch gives nothing. Cryptsetup doesn't have any options that let you do that. crypttab auto mount the filesystem on boot witch is unwanted (only manual mount)

  Read the article

• Five Ways Enterprise 2.0 Can Transform Your Business - Q&A from the Webcast

  - by [email protected]

  A few weeks ago, Vince Casarez and I presented with KMWorld on the Five Ways Enterprise 2.0 Can Transform Your Business. It was an enjoyable, interactive webcast in which Vince and I discussed the ways Enterprise 2.0 can transform your business and more importantly, highlighted key customer examples of how to do so. If you missed the webcast, you can catch a replay here. We had a lot of audience participation in some of the polls we conducted and in the Q&A session. We weren't able to address all of the questions during the broadcast, so we attempted to answer them here: Q: Which area within your firm focuses on Web 2.0? Meaning, do you find new departments developing just to manage the web 2.0 (Twitter, Facebook, etc.) user experience or are you structuring current departments? A: There are three distinct efforts within Oracle. The first is around delivery of these Web 2.0 services for enterprise deployments. This is the focus of the WebCenter team. The second effort is injecting these Web 2.0 services into use cases that drive the different enterprise applications. This effort is focused on how to manage these external services and bring them into a cohesive flow for marketing programs, customer care, and purchasing. The third effort is how we consume these services internally to enhance Oracle's business delivery. It leverages the technologies and use cases of the first two but also pushes the envelope with regards to future directions of these other two areas. Q: In a business, Web 2.0 is mostly like action logs. How can we leverage the official process practice versus the logs of a recent action? Example: a system configuration modified last night on a call out versus the official practice that everybody would use in the morning.A: The key thing to remember is that most Web 2.0 actions / activity streams today are based on collaboration and communication type actions. At least with public social sites like Facebook and Twitter. What we're delivering as part of the WebCenter Suite are not just these types of activities but also enterprise application activities. These enterprise application activities come from different application modules: purchasing, HR, order entry, sales opportunity, etc. The actions within these systems are normally tied to a business object or process: purchase order/customer, employee or department, customer and supplier, customer and product, respectively. Therefore, the activities or "logs" as you name them are able to be "typed" so that as a viewer, you can filter or decide to see only certain types of information. In your example, you could have a view that only showed you recent "configuration" changes and this could be right next to a view that showed off the items to be watched every morning. Q: It's great to hear about customers using the software but is there any plan for future webinars to show what the products/installs look like? That would be very helpful.A: We don't have a webinar planned to show off the install process. However, we have a viewlet that's posted on Oracle Technology Network. You can see it here:http://www.oracle.com/technetwork/testcontent/wcs-install-098014.htmlAnd we've got excellent documentation that walks you through the steps here:http://download.oracle.com/docs/cd/E14571_01/install.1111/e12001/install.htmAnd there's a whole set of demos and examples of what WebCenter can do at this URL:http://www.oracle.com/technetwork/middleware/webcenter/release11-demos-097468.html Q: How do you anticipate managing metadata across the enterprise to make content findable?A: We need to first make sure we are all talking about the same thing when we use a word like "metadata". Here's why...  For a developer, metadata means information that describes key elements of the portal or application and what the portal or application can do. For content systems, metadata means key terms that provide a taxonomy or folksonomy about the information that is being indexed, ordered, and managed. For business intelligence systems, metadata means key terms that provide labels to groups of data that most non-mathematicians need to understand. And for SOA, metadata means labels for parts of the processes that business owners should understand that connect development terminology. There are also additional requirements for metadata to be available to the team building these new solutions as well as requirements to make this metadata available to the running system. These requirements are often separated by "design time" and "run time" respectively. So clearly, a general goal of managing metadata across the enterprise is very challenging. We've invested a huge amount of resources around Oracle Metadata Services (MDS) to be able to provide a more generic system for all of these elements. No other vendor has anything like this technology foundation in their products. This provides a huge benefit to our customers as they will now be able to find content, processes, people, and information from a common set of search interfaces with consistent enterprise wide results. Q: Can you give your definition of terms as to document and content, please?A: Content applies to a broad category of information from Word documents, presentations and reports through attachments to invoices and/or purchase orders. Content is essentially any type of digital asset including images, video, and voice. A document is just one type of content. Q: Do you have special integration tools to realize an interaction between UCM and WebCenter Spaces/Services?A: Yes, we've dedicated a whole team of engineers to exploit the key features of Oracle UCM within WebCenter.  While ensuring that WebCenter can connect to other non-Oracle systems, we've made sure that with the combined set of Oracle technology, no other solution can match the combined power and integration.  This is part of the Oracle Fusion Middleware strategy which is to provide best in class capabilities for Content and Portals.  When combined together, the synergy between the two products enables users to quickly add capabilities when they are needed.  For example, simple document sharing is part of the combined product offering, but if legal discovery or archiving is required, Oracle UCM product includes these capabilities that can be quickly added.  There's no need to move content around or add another system to support this, it's just a feature that gets turned on within Oracle UCM. Q: All customers have some interaction with their applications and have many older versions, how do you see some of these new Enterprise 2.0 capabilities adding value to existing enterprise application deployments?A: Just as Service Oriented Architectures allowed for connecting the processes of different applications systems to work together, there's a need for a similar approach with regards to these enterprise 2.0 capabilities. Oracle WebCenter is built on a core architecture that allows for SOA of these Enterprise 2.0 services so that one set of scalable services can be used and integrated directly into any type of application. In this way, users can get immediate value out of the Enterprise 2.0 capabilities without having to wait for the next major release or upgrade. These centrally managed WebCenter services expose a set of standard interfaces that make it extremely easy to add them into existing applications no matter what technology the application has been implemented. Q: We've heard about Oracle Next Generation applications called "Fusion Applications", can you tell me how all this works together?A: Oracle WebCenter powers the core collaboration and social computing services found within Fusion Applications. It is the core user experience technology for how all the application screens have been implemented. And the core concept of task flows allows for all the Fusion Applications modules to be adaptable and composable by business users and IT without needing to be a professional developer. Oracle WebCenter is at the heart of the new Fusion Applications. In addition, the same patterns and technologies are now being added to the existing applications including JD Edwards, Siebel, Peoplesoft, and eBusiness Suite. The core technology enables all these customers to have a much smoother upgrade path to Fusion Applications. They get immediate benefits of injecting new user interactions into their existing applications without having to completely move to Fusion Applications. And then when the time comes, their users will already be well versed in how the new capabilities work. Q: Does any of this work with non Oracle software? Other databases? Other application servers? etc.A: We have made sure that Oracle WebCenter delivers the broadest set of development choices so that no matter what technology you developers are using, WebCenter capabilities can be quickly and easily added to the site or application. In addition, we have certified Oracle WebCenter to run against non-Oracle databases like DB2 and SQLServer. We have stated plans for certification against MySQL as well. Later in CY 2011, Oracle will provide certification on non-Oracle application servers such as WebSphere and JBoss. Q: How do we balance User and IT requirements in regards to Enterprise 2.0 technologies?A: Wrong decisions are often made because employee knowledge is not tapped efficiently and opportunities to innovate are often missed because the right people do not work together. Collaboration amongst workers in the right business context is critical for success. While standalone Enterprise 2.0 technologies can improve collaboration for collaboration's sake, using social collaboration tools in the context of business applications and processes will improve business responsiveness and lead companies to a more competitive position. As these systems become more mission critical it is essential that they maintain the highest level of performance and availability while scaling to support larger communities. Q: What are the ways in which Enterprise 2.0 can improve business responsiveness?A: With a wide range of Enterprise 2.0 tools in the marketplace, CIOs need to deploy solutions that will meet the requirements from users as well as address the requirements from IT. Workers want a next-generation user experience that is personalized and aggregates their daily tools and tasks, while IT needs to ensure the solution is secure, scalable, flexible, reliable and easily integrated with existing systems. An open and integrated approach to deploying portals, content management, and collaboration can enhance your business by addressing both the needs of knowledge workers for better information and the IT mandate to conserve resources by simplifying, consolidating and centralizing infrastructure and administration.  

  Read the article

• How to report a crash bug with nothing on screen

  - by winniemiel05

  I would like to report an installation bug, but I can't launch ubuntu-bug : On my tablet (LDLC Janus, an Intel based tablet without OS installed by default), I have a problem when I install Ubuntu 11.04 or 11.10. Once the installation is finished, when I reboot, there is ABSOLUTELY nothing on screen, but Ubuntu boot correctly anyway : I choosed auto-login mode and I can hear the login sound. Even if I Ctrl+Alt+F1 or F2... there is nothing. But the livecd works fine (even touch screen even if without multi touch). I tried to install 10.10 it works, but as soon as I upgrade the same problem occure. i installed Fedora 15 and then Fedora 16 (because of other problems) and no problems with them. I would like to report this bug on launchpad but I don't know how to do to give devs logs files and other useful files which could help debug. Thanks a lot for your answer, I would really prefer using my tablet with Ubuntu (I miss U1, USC, Unity)

  Read the article

• Ubuntu 14.04 ATI/Intel Hybrid Graphics DPM

  - by anchit123

  I have a Dell Inspiron 3521 with hybrid ATI/Intel graphics. (AMD Radeon 7670M / Intel HD 4000) using Ubuntu 14.04 with open source drivers for graphics. (xserver-xorg-video-ati) I read that Ubuntu 14.04 with the linux kernel version 3.13 supports auto switching between graphics and dynamic power management. Is it correct? Anyway, if it is true, I dont think that it is working in my system , because fan runs constantly and battery backup is less than 2 hours. lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff) What should I do? Is there any hope that this gets fixed in future kernels?

  Read the article

• Can't connect to Wired Network after installing 12.04

  - by ezz9

  I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

  Read the article

• how can i bridge my LAN port to batman-adv?

  - by rubo77

  On Ubuntu 12.04 I have my Laptop connected to and part of a batman network. So my Laptop is meshing with the net. The script I used is this How can I install a bridge, that will allow another host laptop to get internet through my Laptop? I tried this: service network-manager stop batctl if add eth0 apt-get install bridge-utils I added this in /etc/network/interfaces auto br0 iface br0 inet static address 10.116.123.123 bridge_ports eth0 bridge_fd 5 bridge_stp no then ifconfig sais br0 Link encap:Ethernet Hardware Adresse 00:a0:d1:a9:db:da rubo78: inet Adresse:10.116.123.123 Bcast:0.0.0.0 Maske:255.255.255.255 bat0 Link encap:Ethernet Hardware Adresse 6e:8a:8f:f2:82:e3 inet Adresse:10.116.2.250 Bcast:10.116.255.255 Maske:255.255.0.0 ifup br0 batctl if eth0: active wlan0: active but I get no network on the host

  Read the article

• Javascript and PHP how should I en/decode my data

  - by Ron

  Hello everyone. I whould like to know in what encryption should I encode my data and why first of all, I use GET method because it is search engine inside website. second, I use RTL language (hebrew) and thrid which basically is why I ask this question - firefox and safari (as I understood) encode and decode urls automaticly so if I encoded url, in firefox I will see it decoded which is good but if I copy-paste the url to the address bar and than enter the site firefox encode the uncoded url to utf (i think). anyway, what en/decode should I use, and how can I overcome the firefox auto en/decode?

  Read the article

• Backup all home folders on usb disk and accessibility

  - by PatrickV

  I am using Ubuntu 12.04 and have multiple family members working on it with there own home folder. I have an USB disk and want to use it to backup my home folders. Trying this, I got some questions. When my disk auto mount, it is not visible for each user. It seams to be visible for the user the time I connect the usb disk. I want to create one folder per home on the usb disk to backup the data to. But when I format the disk in EXT4 or FAT for example it is Read Only. How can I format the disk so it is accessible to every user. Best Regards, Patrick

  Read the article

• Good php editor

  - by Web Developer

  i have seen through other questions on the topic but most are a bit old. I looking for a good editor for developing on PHP in Linux(ubuntu). Here is my requirements Basic editor features Free Light-Weight Syntax highlighting Code Folding (class,function,if/else/while/foreach block) Code completion Invalid Syntax/Error highlighting as you type Auto code intending Snippet support(pieces of custom or language specific codes that i can insert) Extendable support It would be great if it had the following Debugging support WYSIWYG Code formatting Framework support(cakephp/yii/zend/smarty) Testing support Todo Native look and feel(Gnome) Flex/ROR support is welcome but not a requirement Mysql support I have tried the following editors Netbeans - it bloated, resource hogging and doesnt not have a native look and feel. Eclipse is okay but i cant fold if/while blocks and slow. Gedit can be extended and i have tried it but still i could not fold code or show error. I currently use Geany but it doesn't inform me of syntax errors as i type. If you have ways to solve the problems with above editors they too are also welcome

  Read the article

• Byte Size Tips: How to Stop OS X from Changing the Display Brightness Automatically

  - by The Geek

  After getting a new MacBook Air and deciding to try out OS X for a while, I started wondering why the battery would suddenly start dying really fast, but only when I was sitting at the kitchen table. That’s when I noticed the display brightness kept changing on its own… and realized the problem. OS X, just like your phone, and any modern device, tries to figure out the brightness of the room you’re in, and adjust the brightness of the screen. If you are over in Windows, it’s called “Adaptive” brightness, while your phone will just call it “Auto”. While this technology is great in theory, I don’t really need max brightness all the time, and I like to control it manually to make sure I’m getting the best battery life. Open up System Preferences, head to Displays. Then uncheck the Automatically adjust brightness setting.     

  Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >