Search Results

Search found 8185 results on 328 pages for 'live meetings'.

Page 177/328 | < Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >

  • Setting up dynamic DNS for linked router

    - by cherrun
    I have a 'main' router that receives the internet signal from the ISP and another one in my room, connected with a cable. The main router is running its original firmware and is very limited in its features, unfortunately I can not change this router, since my phone company has some hardcoded stuff in there and the internet will only work with this router. My second router is running DD-WRT firmware. Now I need to set up dynamic DNS, so I can access my NAS machine remotely, which is connected to the second router. As mentioned, this can't be done with the main router, due to its limited features. DHCP is turned off on the second router, since it gets its IP from the main one. Is there a possibility to set up dynamic DNS on the second router, without changing any (or much) on the main router? Maybe as a side note: I live in Germany, don't know if the set up of the routers are different in other countries.

    Read the article

  • Setting up dynamic DNS for linked router

    - by cherrun
    I have a 'main' router that receives the internet signal from the ISP and another one in my room, connected with a cable. The main router is running its original firmware and is very limited in its features, unfortunately I can not change this router, since my phone company has some hardcoded stuff in there and the internet will only work with this router. My second router is running DD-WRT firmware. Now I need to set up dynamic DNS, so I can access my NAS machine remotely, which is connected to the second router. As mentioned, this can't be done with the main router, due to its limited features. DHCP is turned off on the second router, since it gets its IP from the main one. Is there a possibility to set up dynamic DNS on the second router, without changing any (or much) on the main router? Maybe as a side note: I live in Germany, don't know if the set up of the routers are different in other countries.

    Read the article

  • Rosetta Stone Network V3 doesn't recognize built-in microphone in OSX Lion

    - by zarose
    I am using Rosetta Stone Network V3 on an early 2011 MacBook Pro running OSX Lion 10.7.3. When I log in, select a language and level, and then a lesson, I am prompted to select a microphone. The built in microphone doesn't show up, yet I've used it multiple times for other applications. I heard from another user that it doesn't work if headphones with a built-in microphone are used. I have not yet tried a USB microphone. Is there some free work around to this? I would prefer to not have to buy a USB microphone, but if that is the only solution, then I'll live. Edit: I noticed that Rosetta Stone tells me that if I don't have a microphone I should disable speech to move on, but that option is grayed out for me.

    Read the article

  • Installed ASUS HD4670, now unable to install ANY Debian due to low memory corruption

    - by Alfabravo
    I have a desktop PC which initially had the Intel D946gzis mobo, its chipset as video controller, some RAM and so. There I installed Debian without a problem alongside WindowsXP. I've bought an ASUS HD 4670 video card, installed it on the PC and now the installed Debian does not work, while the Ubuntu live CD refuses to run no matter if I set acpi, apic on or off... it throws me some low memory corruption at position just like shown here. With normal configuration, Debian throws kernel panic (keyboard lights blinking). Anyone have faced this before? Ideas? Thanks!! (meanwhile, debian hides in a virtualbox :'( ) Edited: Tried Ubuntu 9.10 x64 (due to the fact i've a core2duo at 2GHz) and it throws a kernel-panic to me (flashing caps and num LEDs). On screen, can be read different lines with things like: ... [ 1.957161] [] rb_erase+0xd6/0x160 [ 1.957266] [] page_fault+0x25/0x30 Could it be something about this new video card having ddr3?

    Read the article

  • XenServer 5.5 Error adding additional Server to Ressource Pool

    - by SideShowCoder
    I'm running Citrix XenServer 5.5 as a testsetup, with Openfiler providing Storage via NFS. I tried to setup a Ressource Pool to test Live migration but I'm unable to a my 2. Server to the Pool. It fails after about 10sec with the Error: 4/26/2010 2:54:52 PM Error: Adding server 'u-173-c047.XXX.XXX' to pool 'Portland' - Internal error: Stunnel.Stunnel_error("") I'm kind of lost right now where to look whats causing this, and the Error is not really of any help. Are there logs availible somewhere besides in XenCenter, which might be helpful? Any Ideas what is causing this? Thanks

    Read the article

  • Setting up a wireless network with Verizon MiFi

    - by winarm
    I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

    Read the article

  • Automatically repair network connection when it goes down.

    - by Spines
    Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

    Read the article

  • Linux Mint 13 64bit Cinnamon and Oracle Virtualbox: 3d acceleration crash

    - by Stephen Swensen
    I've recently got an interest in Linux. After some research, it looks like Linux Mint 13 cinnamon is hot and I thought I'd try it out... I'm running Windows 7 64bit and have experience with Oracle Virtual Box. So I thought it would be a good idea to try out Linux Mint inside Virtual Box. I download Linux Mint 13 64bit Cinnamon and set it up in my VM player... Nothing special about my settings. Except Linux Mint 13 Cinnamon requires 3d acceleration, and when I enable that, it crashes whenever I open the Menu in the bottom left corner of the guest OS (and some other times too)... I've seen other mentions of this problem on the web, but no solutions. Is there a solution? If not, any suggestions short of installing the OS on a partition for trying out this OS (I'm not interested in the LIve mode either - I'd really like to get the full feel for it)?

    Read the article

  • Mircosoft Expressions rejecting FP extensions

    - by Moe
    Hey there, I've just moved to a new server and I can't seem to get FrontPage extensions to work with Mircosoft Expressions. I like to edit my site Live rather then local to server. But Now, when I access my domain.. eg: http://domain.com It'll come up with: Access Denied. And if I click details it returns 501 Method Not Implemented Method Not Implemented GET to / not supported. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. If I define (in .htaccess): ErrorDocument 404 /404.php The Details returns the Title and contents of 404.php. And if I define (in .htaccess): ErrorDocument 404 /404.php ErrorDocument 501 /501.php The Details return nothing. What Am I doing wrong? Thanks.

    Read the article

  • HAProxy -- pause/queue all traffic without losing requests

    - by Marc
    I basically have the same problem as mentioned in this thread -- I would like to temporarily suspend all requests to all servers of a certain backend, so that I can upgrade the backend and the database it uses. Since this is a live system, I would like to queue up requests, and send them to the backend servers once they've been upgraded. Since I'm doing a database upgrade with the code change, I have to upgrade all backend servers simultaneously, so I can't just bring one down at a time. I tried using the tcp-request options combined with removing the static healthcheck file as mentioned in that thread, but had no luck. Setting the default "maxconn" value to 0 seems to pause and queue connections as desired, but then there seems to be no way to increase the value back to a positive number without restarting HAProxy, which kills all requests that had been queued up until that point. (The "hot-reconfiguration" options using -sf and -st start a new process, which doesn't seem to do what I want). Is what I'm trying to do possible?

    Read the article

  • Do MSDTC and disaster recovery go together?

    - by DevDelivery
    Our application writes to multiple Sql Server databases within a distributed transaction. The Ops guys are saying that this messes up their disaster recovery plan because while the transactions on the live tables may commit at the same time, the log shipping on the separate databases happen at slightly different times. So in in a disaster recovery situation, there will be a few partial transactions. Is there a method for maintaining separate but synced databases in DR? Or do we have to re-design to relatively independent databases (or a single database)?

    Read the article

  • Apache error_log repeated attempts to access forum.php

    - by bMon
    About every two seconds I am getting: [Sat Feb 19 19:00:01 2011] [error] [client 69.239.204.217] script '/var/www /html/forum.php' not found or unable to stat [Sat Feb 19 19:00:04 2011] [error] [client 69.239.204.217] File does not exist: /var/www/html/404.shtml ..in my /var/log/httpd/error_log file. Sometimes the request will be for forum_asp.php. I'm assuming its a bot trying to access insecure forum files, but I'm not so sure since it appears each is a unique IP and not just a few rouge IPs hitting it consecutively. And whois results of the ip's aren't all the classic ISP in Russia or China, they are more end user address (comcast, etc). Any insight into whats going on here would be appreciated. Also, any techniques people use to do a "live monitor" of web traffic would be appreciated. Right now I'm doing a: tail -f error_log Thanks.

    Read the article

  • Snow Leopard tzdata

    - by pgb
    I live in Argentina, and our DST rules change often. So often, that major OS' tend to ship with an old version of tzdata DBs. In the past, I successfully updated the time zone databases in Tiger and Leopard. Today, however, when trying to update it in Snow Leopard, it did not work. Not only it failed, but now even after I reverted my changes, there seems to be some "cache" where the time zone information was retained. The files I updated (and reverted) are located at: /usr/share/zoneinfo and /usr/share/icu. To update those, I grabbed Apple's source code for ICU and recompiled it's database using the latest tzdata file (2010b). Then, I recompiled the tzinfo by running zic, and copied all the files to the system folders. Does anyone have experience dealing with Snow Leopard's timezone DB and can help? Thank you.

    Read the article

  • How do I copy/clone a dynamic disk in Windows 7?

    - by PP
    I have some dynamic disks (or "partitions" but they are not really partitions) that I want to copy onto spare hard drives. I tried using gpartd (and fdisk for that matter) from a linux live disc. All it saw was hard drives with only one partition encasing the whole hard drive. So gpartd/fdisk is incapable of identifying the dynamic "partitions" and allowing me to copy them. Any tools that can be used to clone/copy a dynamic "partition"? (I'm open to commercial software suggestions if they can do the job).

    Read the article

  • my Website loss packet in 70% countries, how can i dertermine why its loss packets?

    - by user2511667
    I checked my website on google page speed tester, it show result 90/100. I checked my website on pingdom it shows good result there. When i check my website in cloudmonitor.ca.com, it shows good result in 30% countries and all other countries it show packet loss (100%) How we can determine why my website has packet loss? And what is its solution? Is this problem from my server or from my website? I created new html blank page and set it too my index page, after I tested, it still shows packet loss, guess this means the problem is not in my website. Here is live result When I visit my website in browser, website is working fine. But when i test my domain or IP 198.178.123.219 in command Prompt it shows "Request time out" Why time out in command prompt?

    Read the article

  • Problem restarting my Ubuntu system

    - by VoY
    Whenever I try to restart my Ubuntu either from the command line by typing reboot or in GNOME the computer goes from X to console, starts the shutdown process and then a message saying "[ some number ] Starting new kernel" appears on the screen and the computer goes back to X login screen. I suspect this must have something to do with nvidia drivers, because it seemed to have appeared around the time I bought a new graphic card. Also, when I reboot the second time I see weird graphical artifacts on the screen. When I boot from ubuntu live cd I can reboot just fine. I used jaunty, recently I switched to karmic with no change. This bug is very annoying, because I have to hard reset my computer in order to reboot. Also not good for the filesystems, I suspect. Can you suggest a way to debug the cause or if not at least the easiest way to go about reinstalling ubuntu without losing customizations/settings/data?

    Read the article

  • ubuntu 9.10 screen flickering problem on Thinkpad R31 with Intel 83830 Graphics

    - by PA
    I am trying to revitalize an old Thinkpad R31 that has the Intel 82830 graphics and only 256 MB of RAM. I have tried a Xubuntu 9.10 Live CD. After booting the screen blinks so much that it is practically unreadable. I have searched for updated IBM Thinkpad drivers but I only found drivers for Windows on the Thinkpad support web site. EDIT: I have changed the title and the description. It is not a problem of the drivers. It seems to be a problem with the kernel. See my own answer below.

    Read the article

  • If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

    - by Enigma
    Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

    Read the article

  • Running a small IPTV station

    - by nixterrimus
    I'm looking to run an iptv station for my dorm. I know I can serve multicast so that's not a problem. The station will serve out podcasts and other cc licensed content. The target endpoint is xbmc- a media center. So far I know that I need to serve an rtp stream over udp that's streaming an mpeg-4 avc main or high profile with aac ( or ac3 ?) audio. I've had some luck using vlc with vlm to stream but it seems limited. What are my other options?  Everything has to run on Linux- hopefully open source. How can I use playlists and not live streams? What are my software options?

    Read the article

  • How to boot Windows XP using the image file(not the extracted image file)

    - by Nrew
    Is it possible to boot from an iso image file itself. Because when you burn it, it gets extracted. Because in linux you can just place the .iso file in a removable media and boot from it without extracting. Is it possible to make something like that in windows? What I'm saying is related to this: http://wintoflash.com/forum/viewtopic.php?f=5&t=312 Something like creating a flash drive which has the ability to install multiple os. They have something like this in pendrivelinux but I can't find it anymore. But that boot manager can only install linux. And other live cd's used in cleaning the system. That's why I'm asking if its possible to make a custom windows xp or windows 7 installer so that the image file alone can boot.

    Read the article

  • Need help diagnosting a random BSOD

    - by diimdeep
    I have random BSOD even in idle .. Already tried: memtest - ok scandisk- ok netsh int ip reset Winsock fix. tcpip.sys+2c13e 21.06.2011 15:21:00 DRIVER_IRQL_NOT_LESS_OR_EQUAL tcpip.sys+2de08 22.06.2011 15:09:28 DRIVER_IRQL_NOT_LESS_OR_EQUAL tcpip.sys+2de08 22.06.2011 16:09:31 DRIVER_IRQL_NOT_LESS_OR_EQUAL tcpip.sys+2c13e 23.06.2011 9:48:16 DRIVER_IRQL_NOT_LESS_OR_EQUAL Fastfat.SYS+4dc 21.06.2011 11:55:10 SYSTEM_THREAD_EXCEPTION_NOT_HANDLED ipnat.sys ipnat.sys+6751 ntoskrnl.exe ntoskrnl.exe+699e0 tcpip.sys tcpip.sys+2c13e 0 HTTP.sys HTTP.sys+15d00 ipnat.sys ipnat.sys+6751 tcpip.sys tcpip.sys+2de08 ipnat.sys ipnat.sys+6751 ntoskrnl.exe ntoskrnl.exe+79d94 tcpip.sys tcpip.sys+2c13e Fastfat.SYS Fastfat.SYS+4dc ntkrnlpa.exe ntkrnlpa.exe+8d820 Here is .dmp files and report generated by BlueScreenView https://skydrive.live.com/redir.aspx?cid=7e5eafae5336f402&resid=7E5EAFAE5336F402!116 Please help !! I know this questions but answers in it not help Only browser causes BSOD -- all other TCP operations okay

    Read the article

  • Employee Monitoring software

    - by nute
    I am looking for an employee monitoring solution, that would allow us to remotely connect to our computers to see what is happening live, and preferably having some recording capabilities such as snapshots, URLs visited, etc ... I've looked around the web and most softwares I found were from unknown companies, had crappy websites, and made me feel like their either wanted me to install a virus on my computer, or to scam me. Most also seemed to have planted "reviews" online most likely written by themselves. Basically, anyone has experience with a trustworthy company to accomplish that? Thanks

    Read the article

  • Ubuntu 9.10 desktop installation via USB (boot)

    - by user277980
    I have made a live boot USB using the UnetBootIn tool for Ubuntu 9.10. I have Windows XP SP2 installed as the primary OS, and I want to make a partition for Ubuntu. But when I try to boot it via USB, it just goes to boot menu of Ubuntu, then I enter the default type for installation. After that nothing happens, just the Ubuntu logo shows up and just that nothing happens after that. I can try the simpler task also i.e. install via CD but I want to know what's not working with this USB boot method. Thanks in advance.

    Read the article

  • TIME_WAIT connections not being cleaned up after timeout period expires

    - by Mark Dawson
    I am stress testing one of my servers by hitting it with a constant stream of new network connections, the tcp_fin_timeout is set to 60, so if I send a constant stream of something like 100 requests per second, I would expect to see a rolling average of 6000 (60 * 100) connections in a TIME_WAIT state, this is happening, but looking in netstat (using -o) to see the timers, I see connections like: TIME_WAIT timewait (0.00/0/0) where their timeout has expired but the connection is still hanging around, I then eventually run out of connections. Anyone know why these connections don't get cleaned up? If I stop creating new connections they do eventually disappear but while I am constantly creating new connections they don't, seems like the kernel isn't getting chance to clean them up? Is there some other config options I need to set to remove the connections as soon as they have expired? The server is running Ubuntu and my web server is nginx. Also it has iptables with connection tracking, not sure if that would cause these TIME_WAIT connections to live on. Thanks Mark.

    Read the article

  • What kind of storage do people actually use for VMware ESX servers?

    - by Dirk Paessler
    VMware and many network evangelists try to tell you that sophisticated (=expensive) fiber SANs are the "only" storage option for VMware ESX and ESXi servers. Well, yes, of course. Using a SAN is fast, reliable and makes vMotion possible. Great. But: Can all ESX/ESXi users really afford SANs? My theory is that less than 20% of all VMware ESX installations on this planet actually use fiber or iSCS SANs. Most of these installation will be in larger companies who can afford this. I would predict that most VMware installations use "attached storage" (vmdks are stored on disks inside the server). Most of them run in SMEs and there are so many of them! We run two ESX 3.5 servers with attached storage and two ESX 4 servers with an iSCS san. And the "real live difference" between both is barely notable :-) Do you know of any official statistics for this question? What do you use as your storage medium?

    Read the article

< Previous Page | 173 174 175 176 177 178 179 180 181 182 183 184  | Next Page >